diff options
Diffstat (limited to 'arch/arm/boot/dts/ls1021a.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ls1021a.dtsi | 219 |
1 files changed, 88 insertions, 131 deletions
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 4fce81422943..2e69d6eab4d1 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -51,7 +9,6 @@ / { #address-cells = <2>; #size-cells = <2>; - compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; aliases { @@ -90,7 +47,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x0>; }; @@ -169,6 +126,7 @@ compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; dcfg: dcfg@1ee0000 { @@ -290,78 +248,45 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; - fsl,tmu-calibration = <0x00000000 0x00000020 - 0x00000001 0x00000024 - 0x00000002 0x0000002a - 0x00000003 0x00000032 - 0x00000004 0x00000038 - 0x00000005 0x0000003e - 0x00000006 0x00000043 - 0x00000007 0x0000004a - 0x00000008 0x00000050 - 0x00000009 0x00000059 - 0x0000000a 0x0000005f - 0x0000000b 0x00000066 - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000065 - 0x00010009 0x0000006f - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000048 - 0x00020004 0x00000054 - 0x00020005 0x00000060 - 0x00020006 0x0000006c - - 0x00030000 0x00000025 - 0x00030001 0x00000033 - 0x00030002 0x00000043 - 0x00030003 0x00000055>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -394,10 +319,9 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 39>, <&edma0 1 38>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 38>, <&edma0 1 39>; status = "disabled"; }; @@ -407,10 +331,9 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 37>, <&edma0 1 36>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 36>, <&edma0 1 37>; status = "disabled"; }; @@ -420,10 +343,9 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 35>, <&edma0 1 34>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 34>, <&edma0 1 35>; status = "disabled"; }; @@ -884,8 +806,8 @@ pcie@3400000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ fsl,pcie-scfg = <&scfg 0>; @@ -894,8 +816,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -908,8 +830,8 @@ pcie@3500000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; fsl,pcie-scfg = <&scfg 1>; @@ -918,8 +840,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -992,6 +914,7 @@ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1"; + #dma-cells = <2>; dma-channels = <8>; block-number = <1>; block-offset = <0x1000>; @@ -1005,6 +928,7 @@ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x8>; #fsl,rcpm-wakeup-cells = <2>; + #power-domain-cells = <0>; }; ftm_alarm0: timer0@29d0000 { @@ -1016,4 +940,37 @@ big-endian; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; |