diff options
Diffstat (limited to 'arch/arm/boot/dts/lpc3250-phy3250.dts')
| -rw-r--r-- | arch/arm/boot/dts/lpc3250-phy3250.dts | 87 |
1 files changed, 52 insertions, 35 deletions
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index 1e1c2f517a82..ebd19258e22b 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -1,6 +1,7 @@ /* * PHYTEC phyCORE-LPC3250 board * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> * Copyright 2012 Roland Stigge <stigge@antcom.de> * * The code contained herein is licensed under the GNU General Public @@ -17,45 +18,12 @@ / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - regulators { - backlight_reg: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "backlight_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 4 0>; - enable-active-high; - regulator-boot-on; - }; - - lcd_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "lcd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 0 0>; - enable-active-high; - regulator-boot-on; - }; - - sd_reg: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 5 0>; - enable-active-high; - }; - }; - leds { compatible = "gpio-leds"; @@ -69,10 +37,59 @@ linux,default-trigger = "heartbeat"; }; }; + + panel: panel { + compatible = "sharp,lq035q7db03"; + power-supply = <®_lcd>; + + port { + panel_input: endpoint { + remote-endpoint = <&cldc_output>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_sd: regulator-sd { + compatible = "regulator-fixed"; + regulator-name = "sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + regulator-boot-on; + }; }; &clcd { + max-memory-bandwidth = <18710000>; status = "okay"; + + port { + cldc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; }; &i2c1 { @@ -130,7 +147,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; - vmmc-supply = <&sd_reg>; + vmmc-supply = <®_sd>; status = "okay"; }; |