1 files changed, 29 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d30e48bd1e9d..27a9352b9d7a 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -7,18 +7,18 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9n12.dtsi"
+#include "at91sam9n12.dtsi"
 
 / {
 	model = "Atmel AT91SAM9N12-EK";
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
@@ -40,6 +40,15 @@
 
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
 			};
 
 			i2c1: i2c@f8014000 {
@@ -55,7 +64,7 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioA 7 0>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -63,7 +72,14 @@
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<0 7 0x0 0x5>;	/* PA7 gpio CD pin pull up and deglitch */
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
 				};
 			};
@@ -77,6 +93,10 @@
 					reg = <0>;
 				};
 			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -95,19 +115,19 @@
 
 		d8 {
 			label = "d8";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		d9 {
 			label = "d6";
-			gpios = <&pioB 5 1>;
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
 			label = "d7";
-			gpios = <&pioB 6 0>;
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -117,7 +137,7 @@
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};