diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d2_xplained.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_xplained.dts | 234 |
1 files changed, 225 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e8d63afdb135..e74df327cdd3 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -44,6 +44,8 @@ */ /dts-v1/; #include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/mfd/atmel-flexcom.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -58,15 +60,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -90,8 +83,26 @@ status = "okay"; }; + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; /* conflict with qspi0 */ + }; + apb { spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; m25p80@0 { @@ -102,25 +113,130 @@ }; macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; status = "okay"; }; uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; status = "okay"; }; i2c0: i2c@f8028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + status = "okay"; + + regulators { + vdd_1v35_reg: DCDC_REG1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: DCDC_REG2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: DCDC_REG3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: LDO_REG1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: LDO_REG2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: LDO_REG3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: LDO_REG4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; + + flx0: flexcom@f8034000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx0_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + status = "okay"; + }; }; uart3: serial@fc008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; + status = "okay"; + }; + + flx4: flexcom@fc018000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; }; i2c1: i2c@fc028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; at24@54 { @@ -129,6 +245,106 @@ pagesize = <16>; }; }; + + pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, + <PIN_PD13__FLEXCOM4_IO1>; + bias-disable; + }; + + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD4__TWD1>, + <PIN_PD5__TWCK1>; + bias-disable; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PB14__GTXCK>, + <PIN_PB15__GTXEN>, + <PIN_PB16__GRXDV>, + <PIN_PB17__GRXER>, + <PIN_PB18__GRX0>, + <PIN_PB19__GRX1>, + <PIN_PB20__GTX0>, + <PIN_PB21__GTX1>, + <PIN_PB22__GMDC>, + <PIN_PB23__GMDIO>; + bias-disable; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>, + <PIN_PA6__SDMMC0_DAT4>, + <PIN_PA7__SDMMC0_DAT5>, + <PIN_PA8__SDMMC0_DAT6>, + <PIN_PA9__SDMMC0_DAT7>; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA10__SDMMC0_RSTN>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA15__SPI0_MOSI>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = <PIN_PD2__URXD1>, + <PIN_PD3__UTXD1>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PB11__URXD3>, + <PIN_PB12__UTXD3>; + bias-disable; + }; + }; }; }; }; |