diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-lmu5000.dts')
-rw-r--r-- | arch/arm/boot/dts/at91-lmu5000.dts | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts new file mode 100644 index 000000000000..f8863d7c0798 --- /dev/null +++ b/arch/arm/boot/dts/at91-lmu5000.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree file for CalAmp LMU5000 board + * + * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com> + */ + +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "CalAmp LMU5000"; + compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + status = "okay"; + + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + user1@4000000 { + label = "user1"; + reg = <0x4000000 0x2000000>; + }; + + user2@6000000 { + label = "user2"; + reg = <0x6000000 0x2000000>; + }; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + status = "okay"; +}; + +&pinctrl { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usb0 { + pinctrl_usb1_vbus_gpio: usb0_vbus_gpio { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&ssc0 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usart0 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usb0 { + num-ports = <2>; + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; |