diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-385-atl-x530.dts')
-rw-r--r-- | arch/arm/boot/dts/armada-385-atl-x530.dts | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts new file mode 100644 index 000000000000..ed3f41c7df71 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-atl-x530.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board. + (x530/AT-GS980MX) + * + Copyright (C) 2020 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "x530/AT-GS980MX"; + compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + i2c0: i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + }; + + uart0: serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + reset-delay-us = <400000>; +}; + +&pcie2 { + status = "okay"; +}; + +&devbus_cs1 { + compatible = "marvell,mvebu-devbus"; + status = "okay"; + + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + nvs@0 { + status = "okay"; + + compatible = "mtd-ram"; + reg = <0 0x00080000>; + bank-width = <1>; + label = "nvs"; + }; +}; + +&pinctrl { + i2c0_gpio_pins: i2c-gpio-pins-0 { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-1 = <&i2c0_gpio_pins>; + scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + i2c0mux: mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c@0 { /* POE devices MUX */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adt7476_2e: hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + adt7476_2d: hwmon@2d { + compatible = "adi,adt7476"; + reg = <0x2d>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio@20 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; /* Chip select 1 */ + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00e80000>; + label = "unused"; + }; + partition@idprom { + reg = <0x00fc0000 0x00040000>; + label = "idprom"; + }; + }; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + marvell,nand-enable-arbiter; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@user { + reg = <0x00000000 0x0f000000>; + label = "user"; + }; + partition@errlog { + /* Maximum mtdoops size is 8MB, so set to that. */ + reg = <0x0f000000 0x00800000>; + label = "errlog"; + }; + partition@nand-bbt { + reg = <0x0f800000 0x00800000>; + label = "nand-bbt"; + }; + }; + }; +}; + |