diff options
Diffstat (limited to 'Documentation')
55 files changed, 461 insertions, 301 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index f7e32f218f73..e82fc37be802 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -43,7 +43,7 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. -What: /sys/devices/hv_24x7/interface/cpumask +What: /sys/devices/hv_24x7/cpumask Date: July 2020 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: read only diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst index f1fc8ae3846a..cc860a0c296b 100644 --- a/Documentation/RCU/lockdep.rst +++ b/Documentation/RCU/lockdep.rst @@ -49,7 +49,7 @@ checking of rcu_dereference() primitives: is invoked by both RCU-sched readers and updaters. srcu_dereference_check(p, c): Use explicit check expression "c" along with - srcu_read_lock_held()(). This is useful in code that + srcu_read_lock_held(). This is useful in code that is invoked by both SRCU readers and updaters. rcu_dereference_raw(p): Don't check. (Use sparingly, if at all.) diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt index d336f3f73a4c..63fd4e6a014b 100644 --- a/Documentation/admin-guide/devices.txt +++ b/Documentation/admin-guide/devices.txt @@ -1662,7 +1662,7 @@ 98 block User-mode virtual block device 0 = /dev/ubda First user-mode block device - 16 = /dev/udbb Second user-mode block device + 16 = /dev/ubdb Second user-mode block device ... Partitions are handled in the same way as for IDE diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index a683976fad6d..d2795ca6821e 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -489,6 +489,9 @@ Files in /sys/fs/ext4/<devname>: multiple of this tuning parameter if the stripe size is not set in the ext4 superblock + mb_max_inode_prealloc + The maximum length of per-inode ext4_prealloc_space list. + mb_max_to_scan The maximum number of extents the multiblock allocator will search to find the best extent. @@ -529,21 +532,21 @@ Files in /sys/fs/ext4/<devname>: Ioctls ====== -There is some Ext4 specific functionality which can be accessed by applications -through the system call interfaces. The list of all Ext4 specific ioctls are -shown in the table below. +Ext4 implements various ioctls which can be used by applications to access +ext4-specific functionality. An incomplete list of these ioctls is shown in the +table below. This list includes truly ext4-specific ioctls (``EXT4_IOC_*``) as +well as ioctls that may have been ext4-specific originally but are now supported +by some other filesystem(s) too (``FS_IOC_*``). -Table of Ext4 specific ioctls +Table of Ext4 ioctls - EXT4_IOC_GETFLAGS + FS_IOC_GETFLAGS Get additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_GETFLAGS. + an integer bitfield, with bit values described in ext4.h. - EXT4_IOC_SETFLAGS + FS_IOC_SETFLAGS Set additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_SETFLAGS. + an integer bitfield, with bit values described in ext4.h. EXT4_IOC_GETVERSION, EXT4_IOC_GETVERSION_OLD Get the inode i_generation number stored for each inode. The diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index bdc1f33fd3d1..a1068742a6df 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1233,8 +1233,7 @@ efi= [EFI] Format: { "debug", "disable_early_pci_dma", "nochunk", "noruntime", "nosoftreserve", - "novamap", "no_disable_early_pci_dma", - "old_map" } + "novamap", "no_disable_early_pci_dma" } debug: enable misc debug output. disable_early_pci_dma: disable the busmaster bit on all PCI bridges while in the EFI boot stub. @@ -1251,8 +1250,6 @@ novamap: do not call SetVirtualAddressMap(). no_disable_early_pci_dma: Leave the busmaster bit set on all PCI bridges while in the EFI boot stub - old_map [X86-64]: switch to the old ioremap-based EFI - runtime services mapping. [Needs CONFIG_X86_UV=y] efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst index 5e477869df18..5fe1ade88c17 100644 --- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst +++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst @@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles. DYTC Lapmode sensor ------------------- +------------------- sysfs: dytc_lapmode diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 7adef969ffee..5072e7064d13 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's internal P-state selection logic is expected to focus entirely on performance. This will override the EPP/EPB setting coming from the ``sysfs`` interface -(see `Energy vs Performance Hints`_ below). +(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change +the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this +configuration will be rejected. Also, in this configuration the range of P-states available to the processor's internal P-state selection logic is always restricted to the upper boundary @@ -564,8 +566,8 @@ Energy-Performance Preference (EPP) knob (if supported) or its Energy-Performance Bias (EPB) knob. It is also possible to write a positive integer value between 0 to 255, if the EPP feature is present. If the EPP feature is not present, writing integer value to this attribute is not -supported. In this case, user can use - "/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface. +supported. In this case, user can use the +"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface. [Note that tasks may by migrated from one CPU to another by the scheduler's load-balancing algorithm and if different energy vs performance hints are diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index d46429be334e..7df2465fd108 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -36,6 +36,12 @@ Two sets of Questions and Answers (Q&A) are maintained. bpf_devel_QA +Helper functions +================ + +* `bpf-helpers(7)`_ maintains a list of helpers available to eBPF programs. + + Program types ============= @@ -79,4 +85,5 @@ Other .. _networking-filter: ../networking/filter.rst .. _man-pages: https://www.kernel.org/doc/man-pages/ .. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html +.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html .. _BPF and XDP Reference Guide: https://docs.cilium.io/en/latest/bpf/ diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index 66cb238a1040..ad21899981af 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX23 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index 72328d5ca09a..f1af1108129e 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX28 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index ccf5b50e798b..dfa1133f8c5e 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS GPIO controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> description: | diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index d3134ed775fa..21ae7bce038e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS Inter IC (I2C) Controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt deleted file mode 100644 index 7841cb099e13..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt +++ /dev/null @@ -1,66 +0,0 @@ -Texas Instruments K3 Interrupt Aggregator -========================================= - -The Interrupt Aggregator (INTA) provides a centralized machine -which handles the termination of system events to that they can -be coherently processed by the host(s) in the system. A maximum -of 64 events can be mapped to a single interrupt. - - - Interrupt Aggregator - +-----------------------------------------+ - | Intmap VINT | - | +--------------+ +------------+ | - m ------>| | vint | bit | | 0 |.....|63| vint0 | - . | +--------------+ +------------+ | +------+ - . | . . | | HOST | -Globalevents ------>| . . |------>| IRQ | - . | . . | | CTRL | - . | . . | +------+ - n ------>| +--------------+ +------------+ | - | | vint | bit | | 0 |.....|63| vintx | - | +--------------+ +------------+ | - | | - +-----------------------------------------+ - -Configuration of these Intmap registers that maps global events to vint is done -by a system controller (like the Device Memory and Security Controller on K3 -AM654 SoC). Driver should request the system controller to get the range -of global events and vints assigned to the requesting host. Management -of these requested resources should be handled by driver and requests -system controller to map specific global event to vint, bit pair. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Aggregator Node: -------------------------------- -- compatible: Must be "ti,sci-inta". -- reg: Should contain registers location and length. -- interrupt-controller: Identifies the node as an interrupt controller -- msi-controller: Identifies the node as an MSI controller. -- interrupt-parent: phandle of irq parent. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator. -- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta - outputs) range within this INTA, assigned to the - requesting host context. -- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the - global events range reaching this IA and are assigned - to the requesting host context. - -Example: --------- -main_udmass_inta: interrupt-controller@33d00000 { - compatible = "ti,sci-inta"; - reg = <0x0 0x33d00000 0x0 0x100000>; - interrupt-controller; - msi-controller; - interrupt-parent = <&main_navss_intr>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <179>; - ti,sci-rm-range-vint = <0x0>; - ti,sci-rm-range-global-event = <0x1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml new file mode 100644 index 000000000000..c7cd05656a3e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Aggregator + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Aggregator (INTA) provides a centralized machine + which handles the termination of system events to that they can + be coherently processed by the host(s) in the system. A maximum + of 64 events can be mapped to a single interrupt. + + Interrupt Aggregator + +-----------------------------------------+ + | Intmap VINT | + | +--------------+ +------------+ | + m ------>| | vint | bit | | 0 |.....|63| vint0 | + . | +--------------+ +------------+ | +------+ + . | . . | | HOST | + Globalevents ------>| . . |----->| IRQ | + . | . . | | CTRL | + . | . . | +------+ + n ------>| +--------------+ +------------+ | + | | vint | bit | | 0 |.....|63| vintx | + | +--------------+ +------------+ | + | | + +-----------------------------------------+ + + Configuration of these Intmap registers that maps global events to vint is + done by a system controller (like the Device Memory and Security Controller + on AM654 SoC). Driver should request the system controller to get the range + of global events and vints assigned to the requesting host. Management + of these requested resources should be handled by driver and requests + system controller to map specific global event to vint, bit pair. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-inta + + reg: + maxItems: 1 + + interrupt-controller: true + + msi-controller: true + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTA output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for inta output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + interrupt-parent = <&main_navss_intr>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,interrupt-ranges = <0 0 256>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt deleted file mode 100644 index 178fca08278f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ /dev/null @@ -1,82 +0,0 @@ -Texas Instruments K3 Interrupt Router -===================================== - -The Interrupt Router (INTR) module provides a mechanism to mux M -interrupt inputs to N interrupt outputs, where all M inputs are selectable -to be driven per N output. An Interrupt Router can either handle edge triggered -or level triggered interrupts and that is fixed in hardware. - - Interrupt Router - +----------------------+ - | Inputs Outputs | - +-------+ | +------+ +-----+ | - | GPIO |----------->| | irq0 | | 0 | | Host IRQ - +-------+ | +------+ +-----+ | controller - | . . | +-------+ - +-------+ | . . |----->| IRQ | - | INTA |----------->| . . | +-------+ - +-------+ | . +-----+ | - | +------+ | N | | - | | irqM | +-----+ | - | +------+ | - | | - +----------------------+ - -There is one register per output (MUXCNTL_N) that controls the selection. -Configuration of these MUXCNTL_N registers is done by a system controller -(like the Device Memory and Security Controller on K3 AM654 SoC). System -controller will keep track of the used and unused registers within the Router. -Driver should request the system controller to get the range of GIC IRQs -assigned to the requesting hosts. It is the drivers responsibility to keep -track of Host IRQs. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Router Node: ----------------------------- -Required Properties: -- compatible: Must be "ti,sci-intr". -- ti,intr-trigger-type: Should be one of the following: - 1: If intr supports edge triggered interrupts. - 4: If intr supports level triggered interrupts. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value should be 2. - First cell should contain the TISCI device ID of source - Second cell should contain the interrupt source offset - within the device. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dst-id: TISCI device ID of the destination IRQ controller. -- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs - assigned to this interrupt router. Each subtype id - corresponds to a range of host irqs. - -For more details on TISCI IRQ resource management refer: -https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html - -Example: --------- -The following example demonstrates both interrupt router node and the consumer -node(main gpio) on the AM654 SoC: - -main_intr: interrupt-controller0 { - compatible = "ti,sci-intr"; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <2>; - ti,sci = <&dmsc>; - ti,sci-dst-id = <56>; - ti,sci-rm-range-girq = <0x1>; -}; - -main_gpio0: gpio@600000 { - ... - interrupt-parent = <&main_intr>; - interrupts = <57 256>, <57 257>, <57 258>, - <57 259>, <57 260>, <57 261>; - ... -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000000..cff6a956afb4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index 5887c917d480..58fe9d02a781 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -30,9 +30,13 @@ allOf: then: properties: clock-output-names: - items: - - const: clk_out_sd0 - - const: clk_in_sd0 + oneOf: + - items: + - const: clk_out_sd0 + - const: clk_in_sd0 + - items: + - const: clk_out_sd1 + - const: clk_in_sd1 properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 75dc1168d717..10b45966f1b8 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "mmc-controller.yaml" diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 0c9cf6a8808c..26a8f320a156 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -50,6 +50,8 @@ Optional properties: error caused by stop clock(fifo full) Valid range = [0:0x7]. if not present, default value is 0. applied to compatible "mediatek,mt2701-mmc". +- resets: Phandle and reset specifier pair to softreset line of MSDC IP. +- reset-names: Should be "hrst". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml index 1cccc0478d49..bec8f8c71ff2 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS MMC controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 2cf3affa1be7..96c0b1440c9c 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -15,8 +15,15 @@ Required properties: - "nvidia,tegra210-sdhci": for Tegra210 - "nvidia,tegra186-sdhci": for Tegra186 - "nvidia,tegra194-sdhci": for Tegra194 -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. +- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries. + One for the module clock and one for the timeout clock. + For all other Tegra devices, must contain a single entry for + the module clock. See ../clocks/clock-bindings.txt for details. +- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the + strings 'sdhci' and 'tmclk' to represent the module and + the timeout clocks, respectively. + For all other Tegra devices must contain the string 'sdhci' + to represent the module clock. - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194: Example: sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -115,3 +122,22 @@ sdhci@700b0000 { nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; }; + +sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>, + <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>; + clock-names = "sdhci", "tmclk"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index bf7328aba330..dab208b5c7c7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -1,4 +1,4 @@ Distributed Switch Architecture Device Tree Bindings ---------------------------------------------------- -See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation. +See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation. diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 1c4474036d46..fa2baca8c726 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -54,7 +54,8 @@ properties: phy-connection-type: description: - Operation mode of the PHY interface + Specifies interface type between the Ethernet device and a physical + layer (PHY) device. enum: # There is not a standard bus between the MAC and the PHY, # something proprietary is being used to embed the PHY in the diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 08678af5ed93..8ce5ed8a58dd 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -59,9 +59,15 @@ properties: clocks: maxItems: 1 - pinctrl-0: true + power-domains: + maxItems: 1 + + resets: + maxItems: 1 - pinctrl-names: true + phy-mode: true + + phy-handle: true renesas,no-ether-link: type: boolean @@ -74,6 +80,11 @@ properties: specify when the Ether LINK signal is active-low instead of normal active-high +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + required: - compatible - reg @@ -83,7 +94,8 @@ required: - '#address-cells' - '#size-cells' - clocks - - pinctrl-0 + +additionalProperties: false examples: # Lager board @@ -99,8 +111,6 @@ examples: clocks = <&mstp8_clks R8A7790_CLK_ETHER>; phy-mode = "rmii"; phy-handle = <&phy1>; - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; renesas,ether-link-active-low; #address-cells = <1>; #size-cells = <0>; @@ -109,7 +119,5 @@ examples: reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&phy1_pins>; - pinctrl-names = "default"; }; }; diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 64b2c64ca806..a1e2be737eec 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -9,6 +9,14 @@ title: PCIe RC controller on Intel Gateway SoCs maintainers: - Dilip Kota <eswara.kota@linux.intel.com> +select: + properties: + compatible: + contains: + const: intel,lgm-pcie + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index da68f4a25dd9..8740e076061e 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS PWM controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <anson.huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 1b50cedbfb3e..50df1a40bbe3 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "/schemas/spi/spi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 22882e769e26..312d8fee9dbb 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -39,6 +39,7 @@ properties: spi common code does not support use of CS signals discontinuously. i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add this property to re-config the chipselect value in the LPSPI driver. + type: boolean required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml index aedac1669998..16b57f57d103 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX Thermal Binding maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml new file mode 100644 index 000000000000..2a0e9cd9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Core Local Interruptor + +maintainers: + - Palmer Dabbelt <palmer@dabbelt.com> + - Anup Patel <anup.patel@wdc.com> + +description: + SiFive (and other RISC-V) SOCs include an implementation of the SiFive + Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor + interrupts. It directly connects to the timer and inter-processor interrupt + lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local + interrupt controller is the parent interrupt controller for CLINT device. + The clock frequency of CLINT is specified via "timebase-frequency" DT + property of "/cpus" DT node. The "timebase-frequency" DT property is + described in Documentation/devicetree/bindings/riscv/cpus.yaml + +properties: + compatible: + items: + - const: sifive,fu540-c000-clint + - const: sifive,clint0 + + description: + Should be "sifive,<chip>-clint" and "sifive,clint<version>". + Supported compatible strings are - + "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated + onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive + CLINT v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details + + reg: + maxItems: 1 + + interrupts-extended: + minItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts-extended + +examples: + - | + timer@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + interrupts-extended = <&cpu1intc 3 &cpu1intc 7 + &cpu2intc 3 &cpu2intc 7 + &cpu3intc 3 &cpu3intc 7 + &cpu4intc 3 &cpu4intc 7>; + reg = <0x2000000 0x10000>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2baee2c817c1..63996ab03521 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -993,7 +993,7 @@ patternProperties: "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 8c74a99f95e2..16f21e182ff6 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -5,7 +5,7 @@ Writing DeviceTree Bindings in json-schema Devicetree bindings are written using json-schema vocabulary. Schema files are written in a JSON compatible subset of YAML. YAML is used instead of JSON as it -considered more human readable and has some advantages such as allowing +is considered more human readable and has some advantages such as allowing comments (Prefixed with '#'). Schema Contents @@ -19,7 +19,7 @@ $id A json-schema unique identifier string. The string must be a valid URI typically containing the binding's filename and path. For DT schema, it must begin with "http://devicetree.org/schemas/". The URL is used in constructing - references to other files specified in schema "$ref" properties. A $ref values + references to other files specified in schema "$ref" properties. A $ref value with a leading '/' will have the hostname prepended. A $ref value a relative path or filename only will be prepended with the hostname and path components of the current schema file's '$id' value. A URL is used even for local files, diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst index 71c5a40da320..ccd677ba7d76 100644 --- a/Documentation/driver-api/fpga/fpga-bridge.rst +++ b/Documentation/driver-api/fpga/fpga-bridge.rst @@ -6,9 +6,9 @@ API to implement a new FPGA bridge * struct :c:type:`fpga_bridge` — The FPGA Bridge structure * struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops -* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct -* :c:func:`fpga_bridge_register()` — Register a bridge -* :c:func:`fpga_bridge_unregister()` — Unregister a bridge +* devm_fpga_bridge_create() — Allocate and init a bridge struct +* fpga_bridge_register() — Register a bridge +* fpga_bridge_unregister() — Unregister a bridge .. kernel-doc:: include/linux/fpga/fpga-bridge.h :functions: fpga_bridge diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst index 576f1945eacd..af5382af1379 100644 --- a/Documentation/driver-api/fpga/fpga-mgr.rst +++ b/Documentation/driver-api/fpga/fpga-mgr.rst @@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver * ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`. * struct :c:type:`fpga_manager` — the FPGA manager struct * struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops -* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct -* :c:func:`fpga_mgr_register` — Register an FPGA manager -* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager +* devm_fpga_mgr_create() — Allocate and init a manager struct +* fpga_mgr_register() — Register an FPGA manager +* fpga_mgr_unregister() — Unregister an FPGA manager .. kernel-doc:: include/linux/fpga/fpga-mgr.h :functions: fpga_mgr_states diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst index b5484df6ff0f..f487ad64dfb9 100644 --- a/Documentation/driver-api/fpga/fpga-programming.rst +++ b/Documentation/driver-api/fpga/fpga-programming.rst @@ -6,9 +6,9 @@ Overview The in-kernel API for FPGA programming is a combination of APIs from FPGA manager, bridge, and regions. The actual function used to -trigger FPGA programming is :c:func:`fpga_region_program_fpga()`. +trigger FPGA programming is fpga_region_program_fpga(). -:c:func:`fpga_region_program_fpga()` uses functionality supplied by +fpga_region_program_fpga() uses functionality supplied by the FPGA manager and bridges. It will: * lock the region's mutex @@ -20,8 +20,8 @@ the FPGA manager and bridges. It will: * release the locks The struct fpga_image_info specifies what FPGA image to program. It is -allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with -:c:func:`fpga_image_info_free()` +allocated/freed by fpga_image_info_alloc() and freed with +fpga_image_info_free() How to program an FPGA using a region ------------------------------------- @@ -84,10 +84,10 @@ will generate that list. Here's some sample code of what to do next:: API for programming an FPGA --------------------------- -* :c:func:`fpga_region_program_fpga` — Program an FPGA -* :c:type:`fpga_image_info` — Specifies what FPGA image to program -* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct -* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct +* fpga_region_program_fpga() — Program an FPGA +* fpga_image_info() — Specifies what FPGA image to program +* fpga_image_info_alloc() — Allocate an FPGA image info struct +* fpga_image_info_free() — Free an FPGA image info struct .. kernel-doc:: drivers/fpga/fpga-region.c :functions: fpga_region_program_fpga diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst index 0529b2d2231a..31118a8ba218 100644 --- a/Documentation/driver-api/fpga/fpga-region.rst +++ b/Documentation/driver-api/fpga/fpga-region.rst @@ -46,18 +46,18 @@ API to add a new FPGA region ---------------------------- * struct :c:type:`fpga_region` — The FPGA region struct -* :c:func:`devm_fpga_region_create` — Allocate and init a region struct -* :c:func:`fpga_region_register` — Register an FPGA region -* :c:func:`fpga_region_unregister` — Unregister an FPGA region +* devm_fpga_region_create() — Allocate and init a region struct +* fpga_region_register() — Register an FPGA region +* fpga_region_unregister() — Unregister an FPGA region The FPGA region's probe function will need to get a reference to the FPGA Manager it will be using to do the programming. This usually would happen during the region's probe function. -* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count -* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count, +* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count +* of_fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count, given a device node. -* :c:func:`fpga_mgr_put` — Put an FPGA manager +* fpga_mgr_put() — Put an FPGA manager The FPGA region will need to specify which bridges to control while programming the FPGA. The region driver can build a list of bridges during probe time @@ -66,11 +66,11 @@ the list of bridges to program just before programming (:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the following APIs to handle building or tearing down that list. -* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a +* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a list -* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a +* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a list, given a device node -* :c:func:`fpga_bridges_put` — Given a list of bridges, put them +* fpga_bridges_put() — Given a list of bridges, put them .. kernel-doc:: include/linux/fpga/fpga-region.h :functions: fpga_region diff --git a/Documentation/driver-api/iio/core.rst b/Documentation/driver-api/iio/core.rst index b0bc0c028cc5..51b21e002396 100644 --- a/Documentation/driver-api/iio/core.rst +++ b/Documentation/driver-api/iio/core.rst @@ -11,10 +11,10 @@ Industrial I/O Devices ---------------------- * struct :c:type:`iio_dev` - industrial I/O device -* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver -* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver -* :c:func:`iio_device_register()` - register a device with the IIO subsystem -* :c:func:`iio_device_unregister()` - unregister a device from the IIO +* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver +* iio_device_free() - free an :c:type:`iio_dev` from a driver +* iio_device_register() - register a device with the IIO subsystem +* iio_device_unregister() - unregister a device from the IIO subsystem An IIO device usually corresponds to a single hardware sensor and it @@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or At probe: -1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device. +1. Call iio_device_alloc(), which allocates memory for an IIO device. 2. Initialize IIO device fields with driver specific information (e.g. device name, device channels). -3. Call :c:func:`iio_device_register()`, this registers the device with the +3. Call iio_device_register(), this registers the device with the IIO core. After this call the device is ready to accept requests from user space applications. At remove, we free the resources allocated in probe in reverse order: -1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core. -2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device. +1. iio_device_unregister(), unregister the device from the IIO core. +2. iio_device_free(), free the memory allocated for the IIO device. IIO device sysfs interface ========================== diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst index cdb2e829228e..1d4427890d75 100644 --- a/Documentation/fault-injection/nvme-fault-injection.rst +++ b/Documentation/fault-injection/nvme-fault-injection.rst @@ -3,7 +3,7 @@ NVMe Fault Injection Linux's fault injection framework provides a systematic way to support error injection via debugfs in the /sys/kernel/debug directory. When enabled, the default NVME_SC_INVALID_OPCODE with no retry will be -injected into the nvme_end_request. Users can change the default status +injected into the nvme_try_complete_req. Users can change the default status code and no retry flag via the debugfs. The list of Generic Command Status can be found in include/linux/nvme.h diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst index 7f1a40dce6d3..5776cbd5fa53 100644 --- a/Documentation/filesystems/affs.rst +++ b/Documentation/filesystems/affs.rst @@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows: - R maps to r for user, group and others. On directories, R implies x. - - If both W and D are allowed, w will be set. + - W maps to w. - E maps to x. - - H and P are always retained and ignored under Linux. + - D is ignored. - - A is always reset when a file is written to. + - H, S and P are always retained and ignored under Linux. + + - A is cleared when a file is written to. User id and group id will be used unless set[gu]id are given as mount options. Since most of the Amiga file systems are single user systems @@ -128,11 +130,13 @@ Linux -> Amiga: The Linux rwxrwxrwx file mode is handled as follows: - - r permission will set R for user, group and others. + - r permission will allow R for user, group and others. + + - w permission will allow W for user, group and others. - - w permission will set W and D for user, group and others. + - x permission of the user will allow E for plain files. - - x permission of the user will set E for plain files. + - D will be allowed for user, group and others. - All other flags (suid, sgid, ...) are ignored and will not be retained. diff --git a/Documentation/filesystems/ext4/about.rst b/Documentation/filesystems/ext4/about.rst index 0aadba052264..cc76b577d2f4 100644 --- a/Documentation/filesystems/ext4/about.rst +++ b/Documentation/filesystems/ext4/about.rst @@ -39,6 +39,6 @@ entry. Other References ---------------- -Also see http://www.nongnu.org/ext2-doc/ for quite a collection of +Also see https://www.nongnu.org/ext2-doc/ for quite a collection of information about ext2/3. Here's another old reference: http://wiki.osdev.org/Ext2 diff --git a/Documentation/hwmon/abituguru-datasheet.rst b/Documentation/hwmon/abituguru-datasheet.rst index 6d5253e2223b..0cd61471d2a2 100644 --- a/Documentation/hwmon/abituguru-datasheet.rst +++ b/Documentation/hwmon/abituguru-datasheet.rst @@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank, number of bytes data per sensor and contents/meaning of those bytes. Although both this document and the kernel driver have kept the sensor -terminoligy for the addressing within a bank this is not 100% correct, in +terminology for the addressing within a bank this is not 100% correct, in bank 0x24 for example the addressing within the bank selects a PWM output not a sensor. @@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have turned up which do not hold 0x08 at DATA within 250 reads after writing the bank address. With these versions this happens quite frequent, using larger timeouts doesn't help, they just go offline for a second or 2, doing some -internal callibration or whatever. Your code should be prepared to handle +internal calibration or whatever. Your code should be prepared to handle this and in case of no response in this specific case just goto sleep for a while and then retry. @@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks 0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this resulted in a _permanent_ reprogramming of the voltages, luckily I had the sensors part configured so that it would shutdown my system on any out of spec -voltages which proprably safed my computer (after a reboot I managed to +voltages which probably safed my computer (after a reboot I managed to immediately enter the bios and reload the defaults). This probably means that the read/write cycle for the non sensor part is different from the sensor part. diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst index d8243c827de9..cfda60b757ce 100644 --- a/Documentation/hwmon/abituguru.rst +++ b/Documentation/hwmon/abituguru.rst @@ -17,7 +17,7 @@ Supported chips: Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the - firmware and thus effectivly many different revisions of the uGuru. + firmware and thus effectively many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: @@ -33,7 +33,7 @@ Supported chips: sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's this does not always work. For these uGuru's the autodetection can be overridden with the bank1_types module param. For all 3 known - revison 1 motherboards the correct use of this param is: + revision 1 motherboards the correct use of this param is: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards fan_sensors=5 diff --git a/Documentation/hwmon/abituguru3.rst b/Documentation/hwmon/abituguru3.rst index 514f11f41e8b..88046d866385 100644 --- a/Documentation/hwmon/abituguru3.rst +++ b/Documentation/hwmon/abituguru3.rst @@ -13,7 +13,7 @@ Supported chips: Note: The uGuru is a microcontroller with onboard firmware which programs it to behave as a hwmon IC. There are many different revisions of the - firmware and thus effectivly many different revisions of the uGuru. + firmware and thus effectively many different revisions of the uGuru. Below is an incomplete list with which revisions are used for which Motherboards: @@ -24,7 +24,7 @@ Supported chips: - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, AW9D-MAX) - The abituguru3 driver is only for revison 3.0.x.x motherboards, + The abituguru3 driver is only for revision 3.0.x.x motherboards, this driver will not work on older motherboards. For older motherboards use the abituguru (without the 3 !) driver. diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst index 2aac50b97921..334df758dce3 100644 --- a/Documentation/kbuild/llvm.rst +++ b/Documentation/kbuild/llvm.rst @@ -23,8 +23,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced Clang ----- -The compiler used can be swapped out via `CC=` command line argument to `make`. -`CC=` should be set when selecting a config and during a build. +The compiler used can be swapped out via ``CC=`` command line argument to ``make``. +``CC=`` should be set when selecting a config and during a build. :: make CC=clang defconfig @@ -34,33 +34,33 @@ Cross Compiling --------------- A single Clang compiler binary will typically contain all supported backends, -which can help simplify cross compiling. +which can help simplify cross compiling. :: ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang -`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead -`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For -example: +``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead +``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For +example: :: clang --target aarch64-linux-gnu foo.c LLVM Utilities -------------- -LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1` -to enable them. +LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1`` +to enable them. :: make LLVM=1 -They can be enabled individually. The full list of the parameters: +They can be enabled individually. The full list of the parameters: :: - make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\ - OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\ - READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\ + make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \ + OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \ + READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \ HOSTLD=ld.lld Currently, the integrated assembler is disabled by default. You can pass -`LLVM_IAS=1` to enable it. +``LLVM_IAS=1`` to enable it. Getting Help ------------ diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index b81b8913a5a3..58d513a0fa95 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -16,7 +16,7 @@ This document describes the Linux kernel Makefiles. --- 3.5 Library file goals - lib-y --- 3.6 Descending down in directories --- 3.7 Compilation flags - --- 3.8 Command line dependency + --- 3.8 <deleted> --- 3.9 Dependency tracking --- 3.10 Special Rules --- 3.11 $(CC) support functions @@ -39,8 +39,8 @@ This document describes the Linux kernel Makefiles. === 7 Architecture Makefiles --- 7.1 Set variables to tweak the build to the architecture - --- 7.2 Add prerequisites to archheaders: - --- 7.3 Add prerequisites to archprepare: + --- 7.2 Add prerequisites to archheaders + --- 7.3 Add prerequisites to archprepare --- 7.4 List directories to visit when descending --- 7.5 Architecture-specific boot images --- 7.6 Building non-kbuild targets @@ -129,7 +129,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild' file will be used. -Section 3.1 "Goal definitions" is a quick intro, further chapters provide +Section 3.1 "Goal definitions" is a quick intro; further chapters provide more details, with real examples. 3.1 Goal definitions @@ -965,7 +965,7 @@ When kbuild executes, the following steps are followed (roughly): KBUILD_LDFLAGS := -m elf_s390 Note: ldflags-y can be used to further customise - the flags used. See chapter 3.7. + the flags used. See section 3.7. LDFLAGS_vmlinux Options for $(LD) when linking vmlinux @@ -1121,7 +1121,7 @@ When kbuild executes, the following steps are followed (roughly): In this example, the file target maketools will be processed before descending down in the subdirectories. - See also chapter XXX-TODO that describe how kbuild supports + See also chapter XXX-TODO that describes how kbuild supports generating offset header files. @@ -1261,7 +1261,7 @@ When kbuild executes, the following steps are followed (roughly): always be built. Assignments to $(targets) are without $(obj)/ prefix. if_changed may be used in conjunction with custom commands as - defined in 6.8 "Custom kbuild commands". + defined in 7.8 "Custom kbuild commands". Note: It is a typical mistake to forget the FORCE prerequisite. Another common pitfall is that whitespace is sometimes @@ -1411,7 +1411,7 @@ When kbuild executes, the following steps are followed (roughly): that may be shared between individual architectures. The recommended approach how to use a generic header file is to list the file in the Kbuild file. - See "7.2 generic-y" for further info on syntax etc. + See "8.2 generic-y" for further info on syntax etc. 7.11 Post-link pass ------------------- @@ -1601,4 +1601,4 @@ is the right choice. - Describe how kbuild supports shipped files with _shipped. - Generating offset header files. -- Add more variables to section 7? +- Add more variables to chapters 7 or 9? diff --git a/Documentation/locking/locktypes.rst b/Documentation/locking/locktypes.rst index 4cefed8048ca..ddada4a53749 100644 --- a/Documentation/locking/locktypes.rst +++ b/Documentation/locking/locktypes.rst @@ -164,14 +164,14 @@ by disabling preemption or interrupts. On non-PREEMPT_RT kernels local_lock operations map to the preemption and interrupt disabling and enabling primitives: - =========================== ====================== - local_lock(&llock) preempt_disable() - local_unlock(&llock) preempt_enable() - local_lock_irq(&llock) local_irq_disable() - local_unlock_irq(&llock) local_irq_enable() - local_lock_save(&llock) local_irq_save() - local_lock_restore(&llock) local_irq_save() - =========================== ====================== + =============================== ====================== + local_lock(&llock) preempt_disable() + local_unlock(&llock) preempt_enable() + local_lock_irq(&llock) local_irq_disable() + local_unlock_irq(&llock) local_irq_enable() + local_lock_irqsave(&llock) local_irq_save() + local_unlock_irqrestore(&llock) local_irq_restore() + =============================== ====================== The named scope of local_lock has two advantages over the regular primitives: @@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong:: { local_irq_save(flags); -> local_lock_irqsave(&local_lock_1, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags); } func2() { local_irq_save(flags); -> local_lock_irqsave(&local_lock_2, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags); } func3() @@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is:: { local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags); } func2() { local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags); func3(); - local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags); + local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags); } func3() diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index 227f427118e8..b7a627d6c97d 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -101,3 +101,4 @@ to do something different in the near future. ../doc-guide/maintainer-profile ../nvdimm/maintainer-entry-profile + ../riscv/patch-acceptance diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 24168b0d16bd..adc314639085 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -2860,17 +2860,6 @@ version of the linux kernel, found on http://kernel.org The latest version of this document can be found in the latest kernel source (named Documentation/networking/bonding.rst). -Discussions regarding the usage of the bonding driver take place on the -bonding-devel mailing list, hosted at sourceforge.net. If you have questions or -problems, post them to the list. The list address is: - -bonding-devel@lists.sourceforge.net - -The administrative interface (to subscribe or unsubscribe) can -be found at: - -https://lists.sourceforge.net/lists/listinfo/bonding-devel - Discussions regarding the development of the bonding driver take place on the main Linux network mailing list, hosted at vger.kernel.org. The list address is: @@ -2881,10 +2870,3 @@ The administrative interface (to subscribe or unsubscribe) can be found at: http://vger.kernel.org/vger-lists.html#netdev - -Donald Becker's Ethernet Drivers and diag programs may be found at : - - - http://web.archive.org/web/%2E/http://www.scyld.com/network/ - -You will also find a lot of information regarding Ethernet, NWay, MII, -etc. at www.scyld.com. diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst index af029b3ca2ab..11bd5e6108c0 100644 --- a/Documentation/networking/dsa/configuration.rst +++ b/Documentation/networking/dsa/configuration.rst @@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup. # bring up the slave interfaces ip link set lan1 up - ip link set lan1 up + ip link set lan2 up ip link set lan3 up # create bridge diff --git a/Documentation/powerpc/syscall64-abi.rst b/Documentation/powerpc/syscall64-abi.rst index 46caaadbb029..379817ca64d2 100644 --- a/Documentation/powerpc/syscall64-abi.rst +++ b/Documentation/powerpc/syscall64-abi.rst @@ -49,16 +49,18 @@ Register preservation rules Register preservation rules match the ELF ABI calling sequence with the following differences: -=========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- +=========== ============= ======================================== r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile +=========== ============= ======================================== --- For the scv 0 instruction, differences with the ELF ABI --- +=========== ============= ======================================== r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst index 4a9aa4f0681e..918e32d76fc4 100644 --- a/Documentation/process/deprecated.rst +++ b/Documentation/process/deprecated.rst @@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy(). (Users of strscpy() still needing NUL-padding should instead use strscpy_pad().) -If a caller is using non-NUL-terminated strings, strncpy()() can +If a caller is using non-NUL-terminated strings, strncpy() can still be used, but destinations should be marked with the `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_ attribute to avoid future compiler warnings. diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst index 998f76e19cdd..f3f4640ee2af 100644 --- a/Documentation/sound/cards/audigy-mixer.rst +++ b/Documentation/sound/cards/audigy-mixer.rst @@ -332,7 +332,7 @@ WO 9901953 (A1) US Patents (https://www.uspto.gov/) ----------------------------------- +----------------------------------- US 5925841 Digital Sampling Instrument employing cache memory (Jul. 20, 1999) diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst index eccb0f0ffd0f..2ce41d3822d8 100644 --- a/Documentation/sound/cards/sb-live-mixer.rst +++ b/Documentation/sound/cards/sb-live-mixer.rst @@ -337,7 +337,7 @@ WO 9901953 (A1) US Patents (https://www.uspto.gov/) ----------------------------------- +----------------------------------- US 5925841 Digital Sampling Instrument employing cache memory (Jul. 20, 1999) diff --git a/Documentation/sound/designs/timestamping.rst b/Documentation/sound/designs/timestamping.rst index 2b0fff503415..7c7ecf5dbc4b 100644 --- a/Documentation/sound/designs/timestamping.rst +++ b/Documentation/sound/designs/timestamping.rst @@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases this driver_timestamp will be identical to the regular system tstamp. -Examples of typestamping with HDaudio: +Examples of timestamping with HDAudio: 1. DMA timestamp, no compensation for DMA+analog delay :: diff --git a/Documentation/translations/it_IT/process/deprecated.rst b/Documentation/translations/it_IT/process/deprecated.rst index e108eaf82cf6..a642ff3fdc8b 100644 --- a/Documentation/translations/it_IT/process/deprecated.rst +++ b/Documentation/translations/it_IT/process/deprecated.rst @@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è strscpy(). (chi usa strscpy() e necessita di estendere la terminazione con NUL deve aggiungere una chiamata a memset()) -Se il chiamate no usa stringhe terminate con NUL, allore strncpy()() +Se il chiamate no usa stringhe terminate con NUL, allore strncpy() può continuare ad essere usata, ma i buffer di destinazione devono essere marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_ per evitare avvisi durante la compilazione. |