diff options
Diffstat (limited to 'Documentation')
37 files changed, 681 insertions, 126 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index 4ba0a2a61926..640f65e79ef1 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -220,8 +220,11 @@ What: /sys/class/cxl/<card>/reset Date: October 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: write only - Writing 1 will issue a PERST to card which may cause the card - to reload the FPGA depending on load_image_on_perst. + Writing 1 will issue a PERST to card provided there are no + contexts active on any one of the card AFUs. This may cause + the card to reload the FPGA depending on load_image_on_perst. + Writing -1 will do a force PERST irrespective of any active + contexts on the card AFUs. Users: https://github.com/ibm-capi/libcxl What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest) diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl index b82deeaec314..470def06ab0a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl +++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl @@ -1,4 +1,4 @@ -What: state +What: /sys/devices/system/ibm_rtl/state Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery <vernux@us.ibm.com> @@ -10,7 +10,7 @@ Description: The state file allows a means by which to change in and Users: The ibm-prtm userspace daemon uses this interface. -What: version +What: /sys/devices/system/ibm_rtl/version Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery <vernux@us.ibm.com> diff --git a/Documentation/ABI/testing/sysfs-platform-sst-atom b/Documentation/ABI/testing/sysfs-platform-sst-atom new file mode 100644 index 000000000000..0d07c0395660 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-sst-atom @@ -0,0 +1,17 @@ +What: /sys/devices/platform/8086%x:00/firmware_version +Date: November 2016 +KernelVersion: 4.10 +Contact: "Sebastien Guiriec" <sebastien.guiriec@intel.com> +Description: + LPE Firmware version for SST driver on all atom + plaforms (BYT/CHT/Merrifield/BSW). + If the FW has never been loaded it will display: + "FW not yet loaded" + If FW has been loaded it will display: + "v01.aa.bb.cc" + aa: Major version is reflecting SoC version: + 0d: BYT FW + 0b: BSW FW + 07: Merrifield FW + bb: Minor version + cc: Build version diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index e5b6497116f4..c75b64a85859 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -309,3 +309,4 @@ Version History with a reshape in progress. 1.9.0 Add support for RAID level takeover/reshape/region size and set size reduction. +1.9.1 Fix activation of existing RAID 4/10 mapped devices diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt index c7179d3b5c33..812163060fa3 100644 --- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt +++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt @@ -24,7 +24,7 @@ Example: reg = <0x61840000 0x4000>; clock { - compatible = "socionext,uniphier-ld20-clock"; + compatible = "socionext,uniphier-ld11-clock"; #clock-cells = <1>; }; @@ -43,8 +43,8 @@ Provided clocks: 21: USB3 ch1 PHY1 -Media I/O (MIO) clock ---------------------- +Media I/O (MIO) clock, SD clock +------------------------------- Required properties: - compatible: should be one of the following: @@ -52,10 +52,10 @@ Required properties: "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC. + "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. + "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-mio-clock" - for LD20 SoC. + "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - #clock-cells: should be 1. Example: @@ -66,7 +66,7 @@ Example: reg = <0x59810000 0x800>; clock { - compatible = "socionext,uniphier-ld20-mio-clock"; + compatible = "socionext,uniphier-ld11-mio-clock"; #clock-cells = <1>; }; @@ -112,7 +112,7 @@ Example: reg = <0x59820000 0x200>; clock { - compatible = "socionext,uniphier-ld20-peri-clock"; + compatible = "socionext,uniphier-ld11-peri-clock"; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt new file mode 100644 index 000000000000..6f28969af9dc --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt @@ -0,0 +1,23 @@ +* Aspeed BT (Block Transfer) IPMI interface + +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs +(BaseBoard Management Controllers) and the BT interface can be used to +perform in-band IPMI communication with their host. + +Required properties: + +- compatible : should be "aspeed,ast2400-ibt-bmc" +- reg: physical address and size of the registers + +Optional properties: + +- interrupts: interrupt generated by the BT interface. without an + interrupt, the driver will operate in poll mode. + +Example: + + ibt@1e789140 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0x1e789140 0x18>; + interrupts = <8>; + }; diff --git a/Documentation/devicetree/bindings/ipmi.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt index d5f1a877ed3e..d5f1a877ed3e 100644 --- a/Documentation/devicetree/bindings/ipmi.txt +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e885..bfa461aaac99 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index e1d76812419c..05150957ecfd 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers: - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). -- phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", - "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a - de-facto standard property; +- phy-mode: string, operation mode of the PHY interface. This is now a de-facto + standard property; supported values are: + * "mii" + * "gmii" + * "sgmii" + * "qsgmii" + * "tbi" + * "rev-mii" + * "rmii" + * "rgmii" (RX and TX delays are added by the MAC when required) + * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the + MAC should not add the RX or TX delays in this case) + * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC + should not add an RX delay in this case) + * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC + should not add an TX delay in this case) + * "rtbi" + * "smii" + * "xgmii" + * "trgmii" - phy-connection-type: the same as "phy-mode" property but described in ePAPR; - phy-handle: phandle, specifies a reference to a node representing a PHY device; this property is described in ePAPR and so preferred; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-net.txt b/Documentation/devicetree/bindings/net/marvell-orion-net.txt index bce52b2ec55e..6fd988c84c4f 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-net.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-net.txt @@ -49,6 +49,7 @@ Optional port properties: and - phy-handle: See ethernet.txt file in the same directory. + - phy-mode: See ethernet.txt file in the same directory. or diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index ba67b39939c1..71aeda1ca055 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt index 5e60ad18f147..2ad18c4ea55c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt @@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 -RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 +RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6 +TIMER7 TIMER8 VGABIOSROM + Examples: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index f9753c416974..b24583aa34c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index e6bbfccd56c3..5020524cddeb 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -6,25 +6,25 @@ System reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC. - "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC. + "socionext,uniphier-sld3-reset" - for sLD3 SoC. + "socionext,uniphier-ld4-reset" - for LD4 SoC. + "socionext,uniphier-pro4-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-reset" - for LD11 SoC. + "socionext,uniphier-ld20-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: sysctrl@61840000 { - compatible = "socionext,uniphier-ld20-sysctrl", + compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x4000>; reset { - compatible = "socionext,uniphier-ld20-reset"; + compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; @@ -32,30 +32,30 @@ Example: }; -Media I/O (MIO) reset ---------------------- +Media I/O (MIO) reset, SD reset +------------------------------- Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC. - "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. + "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC. + "socionext,uniphier-ld4-mio-reset" - for LD4 SoC. + "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-mio-reset" - for LD11 SoC. + "socionext,uniphier-ld20-sd-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: mioctrl@59810000 { - compatible = "socionext,uniphier-ld20-mioctrl", + compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; reset { - compatible = "socionext,uniphier-ld20-mio-reset"; + compatible = "socionext,uniphier-ld11-mio-reset"; #reset-cells = <1>; }; @@ -68,24 +68,24 @@ Peripheral reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC. - "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC. - "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC. - "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC. + "socionext,uniphier-ld4-peri-reset" - for LD4 SoC. + "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC. + "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC. + "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC. + "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC. + "socionext,uniphier-ld11-peri-reset" - for LD11 SoC. + "socionext,uniphier-ld20-peri-reset" - for LD20 SoC. - #reset-cells: should be 1. Example: perictrl@59820000 { - compatible = "socionext,uniphier-ld20-perictrl", + compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; reset { - compatible = "socionext,uniphier-ld20-peri-reset"; + compatible = "socionext,uniphier-ld11-peri-reset"; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt index a3eb154c32ca..227bb770b027 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.txt +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt @@ -1,7 +1,9 @@ Binding for Cadence UART Controller Required properties: -- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps" +- compatible : + Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC. + Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC. - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. - clocks: Must contain phandles to the UART clocks diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 1e4000d83aee..8d27d1a603e7 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -9,6 +9,14 @@ Required properties: - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. + - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. + - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. + - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. + - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. + - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. + - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. + - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. + - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt new file mode 100644 index 000000000000..5b9b38f578bb --- /dev/null +++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt @@ -0,0 +1,88 @@ +Devicetree bindings for the Axentia TSE-850 audio complex + +Required properties: + - compatible: "axentia,tse850-pcm5142" + - axentia,ssc-controller: The phandle of the atmel SSC controller used as + cpu dai. + - axentia,audio-codec: The phandle of the PCM5142 codec. + - axentia,add-gpios: gpio specifier that controls the mixer. + - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1. + - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2. + - axentia,ana-supply: Regulator that supplies the output amplifier. Must + support voltages in the 2V - 20V range, in 1V steps. + +The schematics explaining the gpios are as follows: + + loop1 relays + IN1 +---o +------------+ o---+ OUT1 + \ / + + + + | / | + +--o +--. | + | add | | + | V | + | .---. | + DAC +----------->|Sum|---+ + | '---' | + | | + + + + + IN2 +---o--+------------+--o---+ OUT2 + loop2 relays + +The 'loop1' gpio pin controlls two relays, which are either in loop position, +meaning that input and output are directly connected, or they are in mixer +position, meaning that the signal is passed through the 'Sum' mixer. Similarly +for 'loop2'. + +In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer +(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays +are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2 +are TSE-850 connectors and DAC is the PCB name of the (filtered) output from +the PCM5142 codec. + +Example: + + &i2c { + codec: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + }; + + ana: ana-reg { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,ssc-controller = <&ssc0>; + axentia,audio-codec = <&codec>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; diff --git a/Documentation/devicetree/bindings/sound/cs35l34.txt b/Documentation/devicetree/bindings/sound/cs35l34.txt new file mode 100644 index 000000000000..b218ead2e68e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs35l34.txt @@ -0,0 +1,64 @@ +CS35L34 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l34" + + - reg : the I2C address of the device for I2C. + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-vtge-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from VP to 8V with + increments of 100mV. + + - cirrus,boost-nanohenry: Inductor value for boost converter. The value is + in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH. + +Optional properties: + + - reset-gpios: GPIO used to reset the amplifier. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS35L34 are delivered to. + - interrupts : IRQ line info CS35L34. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The + range starts at 1200mA and goes to a maximum of 3840mA with increments of + 80mA. The default value is 2480mA. + + - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the + received mono data is in the left or right portion of the I2S frame + according to the AD0 pin or directly via this configuration. + 0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel), + 0x2 = Left, + 0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right + channel), + 0x3 = Right. + + - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take + effect without waiting for a zero cross. + + - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of + SCLK. Otherwise, data is on the falling edge of SCLK. + + +Example: + +cs35l34: cs35l34@40 { + compatible = "cirrus,cs35l34"; + reg = <0x40>; + + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio 10 0>; + + cirrus,boost-vtge-milltvolt = <8000>; /* 8V */ + cirrus,boost-ind-nanohenry = <1000>; /* 1uH */ + cirrus,boost-peak-milliamp = <3000>; /* 3A */ +}; diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt new file mode 100644 index 000000000000..9a2c5e2423d5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l42.txt @@ -0,0 +1,110 @@ +CS42L42 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l42" + + - reg : the I2C address of the device for I2C. + + - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply : + power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS42L42 are delivered to. + + - interrupts : IRQ line info CS42L42. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense + polarity. Normal jacks will short tip sense pin to HS1 when headphones are + plugged in and leave tip sense floating when not plugged in. Inverting jacks + short tip sense when unplugged and float when plugged in. + + 0 = (Default) Non-inverted + 1 = Inverted + + - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no + debounce, the tip sense pin might be noisy on a plug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG. + With no debounce, the tip sense pin might be noisy on an unplug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after + enabling button detection interrupts. After auto-detection and before + servicing button interrupts, the HS bias needs time to settle. If you + don't wait, there is possibility for erroneous button interrupt. + + 0ms - 200ms, + Default = 100ms + + - cirrus,btn-det-event-dbnce : This sets how long the driver delays after + receiving a button press interrupt. With level detect interrupts, you want + to wait a small amount of time to make sure the button press is making a + clean connection with the bias resistors. + + 0ms - 20ms, + Default = 10ms + + - cirrus,bias-lvls : For a level-detect headset button scheme, each button + will bias the mic pin to a certain voltage. To determine which button was + pressed, the driver will compare this biased voltage to sequential, + decreasing voltages and will stop when a comparator is tripped, + indicating a comparator voltage < bias voltage. This value represents a + percentage of the internally generated HS bias voltage. For different + hardware setups, a designer might want to tweak this. This is an array of + descending values for the comparator voltage. + + Array of 4 values + Each 0-63 + < x1 x2 x3 x4 > + Default = < 15 8 4 1> + + +Example: + +cs42l42: cs42l42@48 { + compatible = "cirrus,cs42l42"; + reg = <0x48>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + VCP-supply = <&dummy_vreg>; + VD_FILT-supply = <&dummy_vreg>; + VL-supply = <&dummy_vreg>; + + reset-gpios = <&axi_gpio_0 1 0>; + interrupt-parent = <&gpio0>; + interrupts = <55 8> + + cirrus,ts-inv = <0x00>; + cirrus,ts-dbnc-rise = <0x05>; + cirrus,ts-dbnc-fall = <0x00>; + cirrus,btn-det-init-dbnce = <100>; + cirrus,btn-det-event-dbnce = <10>; + cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>; + cirrus,hs-bias-ramp-rate = <0x02>; +};
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt index 55b53e1fd72c..e0b6165c9cfc 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -43,7 +43,7 @@ mcbsp0: mcbsp@1d10000 { <0x00310000 0x1000>; reg-names = "mpu", "dat"; interrupts = <97 98>; - interrupts-names = "rx", "tx"; + interrupt-names = "rx", "tx"; dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt index fd40c852d7c7..462b04e8209f 100644 --- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -12,7 +12,7 @@ Required properties: Optional properties: - ti,dmic: phandle for the OMAP dmic node if the machine have it connected -- ti,jack_detection: Need to be present if the board capable to detect jack +- ti,jack-detection: Need to be present if the board capable to detect jack insertion, removal. Available audio endpoints for the audio-routing table: diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index d9d8635ff94c..6a4aadc4ce06 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -44,8 +44,7 @@ Required dai-link subnodes: Required CPU/CODEC subnodes properties: -link-name : Name of the dai link. --sound-dai : phandle and port of CPU/CODEC --capture-dai : phandle and port of CPU/CODEC +-sound-dai : phandle/s and port of CPU/CODEC Example: @@ -73,7 +72,7 @@ sound: sound { sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt new file mode 100644 index 000000000000..ccb401cfef9d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt @@ -0,0 +1,85 @@ +msm8916 analog audio CODEC + +Bindings for codec Analog IP which is integrated in pmic pm8916, + +## Bindings for codec core on pmic: + +Required properties + - compatible = "qcom,pm8916-wcd-analog-codec"; + - reg: represents the slave base address provided to the peripheral. + - interrupt-parent : The parent interrupt controller. + - interrupts: List of interrupts in given SPMI peripheral. + - interrupt-names: Names specified to above list of interrupts in same + order. List of supported interrupt names are: + "cdc_spk_cnp_int" - Speaker click and pop interrupt. + "cdc_spk_clip_int" - Speaker clip interrupt. + "cdc_spk_ocp_int" - Speaker over current protect interrupt. + "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. + "mbhc_but_rel_det" - button release interrupt. + "mbhc_but_press_det" - button press event + "mbhc_ins_rem_det" - jack insert removal detect interrupt. + "mbhc_switch_int" - multi button headset interrupt. + "cdc_ear_ocp_int" - Earphone over current protect interrupt. + "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. + "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. + "cdc_ear_cnp_int" - earphone cnp interrupt. + "cdc_hphr_cnp_int" - hphr click and pop interrupt. + "cdc_hphl_cnp_int" - hphl click and pop interrupt. + + - clocks: Handle to mclk. + - clock-names: should be "mclk" + - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. + - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. + - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + +Optional Properties: +- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor + connected. +- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor + connected. + +Example: + +spmi_bus { + ... + audio-codec@f000{ + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + VDD-CDC-IO-supply = <&pm8916_l5>; + VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; + VDD-MICBIAS-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt new file mode 100644 index 000000000000..1c8e4cb25176 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt @@ -0,0 +1,20 @@ +msm8916 digital audio CODEC + +## Bindings for codec core in lpass: + +Required properties + - compatible = "qcom,msm8916-wcd-digital-codec"; + - reg: address space for lpass codec. + - clocks: Handle to mclk and ahbclk + - clock-names: should be "mclk", "ahbix-clk". + +Example: + +audio-codec@771c000{ + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt new file mode 100644 index 000000000000..af5dd35469d7 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt @@ -0,0 +1,24 @@ +J-Core Programmable Interval Timer and Clocksource + +Required properties: + +- compatible: Must be "jcore,pit". + +- reg: Memory region(s) for timer/clocksource registers. For SMP, + there should be one region per cpu, indexed by the sequential, + zero-based hardware cpu number. + +- interrupts: An interrupt to assign for the timer. The actual pit + core is integrated with the aic and allows the timer interrupt + assignment to be programmed by software, but this property is + required in order to reserve an interrupt number that doesn't + conflict with other devices. + + +Example: + +timer@200 { + compatible = "jcore,pit"; + reg = < 0x200 0x30 0x500 0x30 >; + interrupts = < 0x48 >; +}; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 455f2c310a1b..2c30a5479069 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-use-dma: enable dma usage in gadget driver. - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - -Deprecated properties: -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) - in gadget mode. +- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. Example: diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 14cdc101d165..1b5f15653b1b 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -447,7 +447,6 @@ prototypes: int (*flush) (struct file *); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 219ffd41a911..74329fd0add2 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -395,32 +395,6 @@ is not associated with a file: or if empty, the mapping is anonymous. -The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint -of the individual tasks of a process. In this file you will see a mapping marked -as [stack] if that task sees it as a stack. Hence, for the example above, the -task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this: - -08048000-08049000 r-xp 00000000 03:00 8312 /opt/test -08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test -0804a000-0806b000 rw-p 00000000 00:00 0 [heap] -a7cb1000-a7cb2000 ---p 00000000 00:00 0 -a7cb2000-a7eb2000 rw-p 00000000 00:00 0 -a7eb2000-a7eb3000 ---p 00000000 00:00 0 -a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack] -a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 -a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6 -a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6 -a800b000-a800e000 rw-p 00000000 00:00 0 -a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 -a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 -a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 -a8024000-a8027000 rw-p 00000000 00:00 0 -a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 -a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 -a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 -aff35000-aff4a000 rw-p 00000000 00:00 0 -ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] - The /proc/PID/smaps is an extension based on maps, showing the memory consumption for each of the process's mappings. For each of mappings there is a series of lines such as the following: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index d619c8d71966..b5039a00caaf 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -828,7 +828,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index 40884c4fe40c..a0f61898d493 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a description of the deprecated integer-based GPIO interface please refer to gpio-legacy.txt (actually, there is no real mapping possible with the old interface; you just fetch an integer from somewhere and request the -corresponding GPIO. +corresponding GPIO). All platforms can enable the GPIO library, but if the platform strictly requires GPIO functionality to be present, it needs to select GPIOLIB from its @@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows: Since the "led" GPIOs are mapped as active-high, this example will switch their signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped -as active-low, its actual signal will be 0 after this code. Contrary to the legacy -integer GPIO interface, the active-low property is handled during mapping and is -thus transparent to GPIO consumers. +as active-low, its actual signal will be 0 after this code. Contrary to the +legacy integer GPIO interface, the active-low property is handled during +mapping and is thus transparent to GPIO consumers. + +A set of functions such as gpiod_set_value() is available to work with +the new descriptor-oriented interface. diff --git a/Documentation/i2c/i2c-topology b/Documentation/i2c/i2c-topology index e0aefeece551..1a014fede0b7 100644 --- a/Documentation/i2c/i2c-topology +++ b/Documentation/i2c/i2c-topology @@ -326,7 +326,7 @@ Two parent-locked sibling muxes This is a good topology. - .--------. + .--------. .----------. .--| dev D1 | | parent- |--' '--------' .--| locked | .--------. @@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes This is a good topology. - .--------. + .--------. .----------. .--| dev D1 | | mux- |--' '--------' .--| locked | .--------. diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 6d6c07cf1a9a..63912ef34606 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and Switch tagging protocols ------------------------ -DSA currently supports 4 different tagging protocols, and a tag-less mode as +DSA currently supports 5 different tagging protocols, and a tag-less mode as well. The different protocols are implemented in: net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy) net/dsa/tag_dsa.c: Marvell's original DSA tag net/dsa/tag_edsa.c: Marvell's enhanced DSA tag net/dsa/tag_brcm.c: Broadcom's 4 bytes tag +net/dsa/tag_qca.c: Qualcomm's 2 bytes tag The exact format of the tag protocol is vendor specific, but in general, they all contain something which: diff --git a/Documentation/networking/netdev-FAQ.txt b/Documentation/networking/netdev-FAQ.txt index 0fe1c6e0dbcd..a20b2fae942b 100644 --- a/Documentation/networking/netdev-FAQ.txt +++ b/Documentation/networking/netdev-FAQ.txt @@ -29,8 +29,8 @@ A: There are always two trees (git repositories) in play. Both are driven Linus, and net-next is where the new code goes for the future release. You can find the trees here: - http://git.kernel.org/?p=linux/kernel/git/davem/net.git - http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git + https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git + https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git Q: How often do changes from these trees make it to the mainline Linus tree? @@ -76,7 +76,7 @@ Q: So where are we now in this cycle? A: Load the mainline (Linus) page here: - http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git and note the top of the "tags" section. If it is rc1, it is early in the dev cycle. If it was tagged rc7 a week ago, then a release @@ -123,7 +123,7 @@ A: Normally Greg Kroah-Hartman collects stable commits himself, but It contains the patches which Dave has selected, but not yet handed off to Greg. If Greg already has the patch, then it will be here: - http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git A quick way to find whether the patch is in this stable-queue is to simply clone the repo, and then git grep the mainline commit ID, e.g. diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 4fb51d32fccc..433b6724797a 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -33,24 +33,6 @@ nf_conntrack_events - BOOLEAN If this option is enabled, the connection tracking code will provide userspace with connection tracking events via ctnetlink. -nf_conntrack_events_retry_timeout - INTEGER (seconds) - default 15 - - This option is only relevant when "reliable connection tracking - events" are used. Normally, ctnetlink is "lossy", that is, - events are normally dropped when userspace listeners can't keep up. - - Userspace can request "reliable event mode". When this mode is - active, the conntrack will only be destroyed after the event was - delivered. If event delivery fails, the kernel periodically - re-tries to send the event to userspace. - - This is the maximum interval the kernel should use when re-trying - to deliver the destroy event. - - A higher number means there will be fewer delivery retries and it - will take longer for a backlog to be processed. - nf_conntrack_expect_max - INTEGER Maximum size of expectation table. Default value is nf_conntrack_buckets / 256. Minimum is 1. @@ -80,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds) protocols. nf_conntrack_helper - BOOLEAN - 0 - disabled - not 0 - enabled (default) + 0 - disabled (default) + not 0 - enabled Enable automatic conntrack helper assignment. + If disabled it is required to set up iptables rules to assign + helpers to connections. See the CT target description in the + iptables-extensions(8) man page for further information. nf_conntrack_icmp_timeout - INTEGER (seconds) default 30 diff --git a/Documentation/sound/alsa/soc/codec_to_codec.txt b/Documentation/sound/alsa/soc/codec_to_codec.txt new file mode 100644 index 000000000000..704a6483652c --- /dev/null +++ b/Documentation/sound/alsa/soc/codec_to_codec.txt @@ -0,0 +1,103 @@ +Creating codec to codec dai link for ALSA dapm +=================================================== + +Mostly the flow of audio is always from CPU to codec so your system +will look as below: + + --------- --------- +| | dai | | + CPU -------> codec +| | | | + --------- --------- + +In case your system looks as below: + --------- + | | + codec-2 + | | + --------- + | + dai-2 + | + ---------- --------- +| | dai-1 | | + CPU -------> codec-1 +| | | | + ---------- --------- + | + dai-3 + | + --------- + | | + codec-3 + | | + --------- + +Suppose codec-2 is a bluetooth chip and codec-3 is connected to +a speaker and you have a below scenario: +codec-2 will receive the audio data and the user wants to play that +audio through codec-3 without involving the CPU.This +aforementioned case is the ideal case when codec to codec +connection should be used. + +Your dai_link should appear as below in your machine +file: + +/* + * this pcm stream only supports 24 bit, 2 channel and + * 48k sampling rate. + */ +static const struct snd_soc_pcm_stream dsp_codec_params = { + .formats = SNDRV_PCM_FMTBIT_S24_LE, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, +}; + +{ + .name = "CPU-DSP", + .stream_name = "CPU-DSP", + .cpu_dai_name = "samsung-i2s.0", + .codec_name = "codec-2, + .codec_dai_name = "codec-2-dai_name", + .platform_name = "samsung-i2s.0", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ignore_suspend = 1, + .params = &dsp_codec_params, +}, +{ + .name = "DSP-CODEC", + .stream_name = "DSP-CODEC", + .cpu_dai_name = "wm0010-sdi2", + .codec_name = "codec-3, + .codec_dai_name = "codec-3-dai_name", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ignore_suspend = 1, + .params = &dsp_codec_params, +}, + +Above code snippet is motivated from sound/soc/samsung/speyside.c. + +Note the "params" callback which lets the dapm know that this +dai_link is a codec to codec connection. + +In dapm core a route is created between cpu_dai playback widget +and codec_dai capture widget for playback path and vice-versa is +true for capture path. In order for this aforementioned route to get +triggered, DAPM needs to find a valid endpoint which could be either +a sink or source widget corresponding to playback and capture path +respectively. + +In order to trigger this dai_link widget, a thin codec driver for +the speaker amp can be created as demonstrated in wm8727.c file, it +sets appropriate constraints for the device even if it needs no control. + +Make sure to name your corresponding cpu and codec playback and capture +dai names ending with "Playback" and "Capture" respectively as dapm core +will link and power those dais based on the name. + +Note that in current device tree there is no way to mark a dai_link +as codec to codec. However, it may change in future. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 739db9ab16b2..6bbceb9a3a19 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios such as migration. +When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the +set of bits that KVM can return in struct kvm_clock_data's flag member. + +The only flag defined now is KVM_CLOCK_TSC_STABLE. If set, the returned +value is the exact kvmclock value seen by all VCPUs at the instant +when KVM_GET_CLOCK was called. If clear, the returned value is simply +CLOCK_MONOTONIC plus a constant offset; the offset can be modified +with KVM_SET_CLOCK. KVM will try to make all VCPUs follow this clock, +but the exact value read by each VCPU could differ, because the host +TSC is not stable. + struct kvm_clock_data { __u64 clock; /* kvmclock current value */ __u32 flags; diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index f2491a8c68b4..e5dd9f4d6100 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -4,7 +4,17 @@ KVM Lock Overview 1. Acquisition Orders --------------------- -(to be written) +The acquisition orders for mutexes are as follows: + +- kvm->lock is taken outside vcpu->mutex + +- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock + +- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring + them together is quite rare. + +For spinlocks, kvm_lock is taken outside kvm->mmu_lock. Everything +else is a leaf: no other lock is taken inside the critical sections. 2: Exception ------------ |