diff options
Diffstat (limited to 'Documentation')
16 files changed, 94 insertions, 23 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2522b11e593f..f2d26cb7e853 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5197,6 +5197,30 @@ retain_initrd [RAM] Keep initrd memory after extraction + retbleed= [X86] Control mitigation of RETBleed (Arbitrary + Speculative Code Execution with Return Instructions) + vulnerability. + + off - no mitigation + auto - automatically select a migitation + auto,nosmt - automatically select a mitigation, + disabling SMT if necessary for + the full mitigation (only on Zen1 + and older without STIBP). + ibpb - mitigate short speculation windows on + basic block boundaries too. Safe, highest + perf impact. + unret - force enable untrained return thunks, + only effective on AMD f15h-f17h + based systems. + unret,nosmt - like unret, will disable SMT when STIBP + is not available. + + Selecting 'auto' will choose a mitigation method at run + time according to the CPU. + + Not specifying this option is equivalent to retbleed=auto. + rfkill.default_state= 0 "airplane mode". All wifi, bluetooth, wimax, gps, fm, etc. communication is blocked by default. @@ -5568,6 +5592,7 @@ eibrs - enhanced IBRS eibrs,retpoline - enhanced IBRS + Retpolines eibrs,lfence - enhanced IBRS + LFENCE + ibrs - use IBRS to protect kernel Not specifying this option is equivalent to spectre_v2=auto. diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index d6b3f94b9f1f..0793c400d4b0 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -223,7 +223,7 @@ Module Loading Inter Module support -------------------- -Refer to the file kernel/module.c for more information. +Refer to the files in kernel/module/ for more information. Hardware Interfaces =================== diff --git a/Documentation/core-api/symbol-namespaces.rst b/Documentation/core-api/symbol-namespaces.rst index 5ad9e0abe42c..12e4aecdae94 100644 --- a/Documentation/core-api/symbol-namespaces.rst +++ b/Documentation/core-api/symbol-namespaces.rst @@ -51,8 +51,8 @@ namespace ``USB_STORAGE``, use:: The corresponding ksymtab entry struct ``kernel_symbol`` will have the member ``namespace`` set accordingly. A symbol that is exported without a namespace will refer to ``NULL``. There is no default namespace if none is defined. ``modpost`` -and kernel/module.c make use the namespace at build time or module load time, -respectively. +and kernel/module/main.c make use the namespace at build time or module load +time, respectively. 2.2 Using the DEFAULT_SYMBOL_NAMESPACE define ============================================= diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index ff0a5c58d78c..e712444abff1 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -67,7 +67,7 @@ if: then: properties: clocks: - maxItems: 2 + minItems: 2 required: - clock-names diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml index 8cd0adbf7021..7029cb1f38ff 100644 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Atheros ath9k wireless devices Generic Binding maintainers: - - Kalle Valo <kvalo@codeaurora.org> + - Toke Høiland-Jørgensen <toke@toke.dk> description: | This node provides properties for configuring the ath9k wireless device. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 8c01fdba134b..a677b056f112 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies ath11k wireless devices Generic Binding maintainers: - - Kalle Valo <kvalo@codeaurora.org> + - Kalle Valo <kvalo@kernel.org> description: | These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index e9a533080b32..ef18a572a1ff 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -25,12 +25,12 @@ properties: - qcom,sc7280-lpass-cpu reg: - minItems: 2 + minItems: 1 maxItems: 6 description: LPAIF core registers reg-names: - minItems: 2 + minItems: 1 maxItems: 6 clocks: @@ -42,12 +42,12 @@ properties: maxItems: 10 interrupts: - minItems: 2 + minItems: 1 maxItems: 4 description: LPAIF DMA buffer interrupt interrupt-names: - minItems: 2 + minItems: 1 maxItems: 4 qcom,adsp: diff --git a/Documentation/driver-api/firmware/other_interfaces.rst b/Documentation/driver-api/firmware/other_interfaces.rst index b81794e0cfbb..06ac89adaafb 100644 --- a/Documentation/driver-api/firmware/other_interfaces.rst +++ b/Documentation/driver-api/firmware/other_interfaces.rst @@ -13,6 +13,12 @@ EDD Interfaces .. kernel-doc:: drivers/firmware/edd.c :internal: +Generic System Framebuffers Interface +------------------------------------- + +.. kernel-doc:: drivers/firmware/sysfb.c + :export: + Intel Stratix10 SoC Service Layer --------------------------------- Some features of the Intel Stratix10 SoC require a level of privilege diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst index 7da6c30ed596..316cfd8b1891 100644 --- a/Documentation/filesystems/overlayfs.rst +++ b/Documentation/filesystems/overlayfs.rst @@ -466,6 +466,10 @@ overlay filesystem and the value of st_ino for filesystem objects may not be persistent and could change even while the overlay filesystem is mounted, as summarized in the `Inode properties`_ table above. +4) "idmapped mounts" +When the upper or lower layers are idmapped mounts overlayfs will be mounted +without support for POSIX Access Control Lists (ACLs). This limitation will +eventually be lifted. Changes to underlying filesystems --------------------------------- diff --git a/Documentation/livepatch/module-elf-format.rst b/Documentation/livepatch/module-elf-format.rst index dbe9b400e39f..7347638895a0 100644 --- a/Documentation/livepatch/module-elf-format.rst +++ b/Documentation/livepatch/module-elf-format.rst @@ -210,11 +210,11 @@ module->symtab. ===================================== Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->symtab (See layout_symtab() -in kernel/module.c). For livepatch modules, the symbol table copied into memory -on module load must be exactly the same as the symbol table produced when the -patch module was compiled. This is because the relocations in each livepatch -relocation section refer to their respective symbols with their symbol indices, -and the original symbol indices (and thus the symtab ordering) must be +in kernel/module/kallsyms.c). For livepatch modules, the symbol table copied +into memory on module load must be exactly the same as the symbol table produced +when the patch module was compiled. This is because the relocations in each +livepatch relocation section refer to their respective symbols with their symbol +indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. For example, take this particular rela from a livepatch module::: diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 9f41961d11d5..b3a534ed0e7c 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1085,7 +1085,7 @@ cipso_cache_enable - BOOLEAN cipso_cache_bucket_size - INTEGER The CIPSO label cache consists of a fixed size hash table with each hash bucket containing a number of cache entries. This variable limits - the number of entries in each hash bucket; the larger the value the + the number of entries in each hash bucket; the larger the value is, the more CIPSO label mappings that can be cached. When the number of entries in a given hash bucket reaches this limit adding new entries causes the oldest entry in the bucket to be removed to make room. @@ -1179,7 +1179,7 @@ ip_autobind_reuse - BOOLEAN option should only be set by experts. Default: 0 -ip_dynaddr - BOOLEAN +ip_dynaddr - INTEGER If set non-zero, enables support for dynamic addresses. If set to a non-zero value larger than 1, a kernel log message will be printed when dynamic address rewriting diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index c456b5225d66..d14007081595 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -6,6 +6,15 @@ netdev FAQ ========== +tl;dr +----- + + - designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]`` + - for fixes the ``Fixes:`` tag is required, regardless of the tree + - don't post large series (> 15 patches), break them up + - don't repost your patches within one 24h period + - reverse xmas tree + What is netdev? --------------- It is a mailing list for all network-related Linux stuff. This @@ -136,6 +145,20 @@ it to the maintainer to figure out what is the most recent and current version that should be applied. If there is any doubt, the maintainer will reply and ask what should be done. +How do I divide my work into patches? +------------------------------------- + +Put yourself in the shoes of the reviewer. Each patch is read separately +and therefore should constitute a comprehensible step towards your stated +goal. + +Avoid sending series longer than 15 patches. Larger series takes longer +to review as reviewers will defer looking at it until they find a large +chunk of time. A small series can be reviewed in a short time, so Maintainers +just do it. As a result, a sequence of smaller series gets merged quicker and +with better review coverage. Re-posting large series also increases the mailing +list traffic. + I made changes to only a few patches in a patch series should I resend only those changed? ------------------------------------------------------------------------------------------ No, please resend the entire patch series and make sure you do number your @@ -183,6 +206,19 @@ it is requested that you make it look like this:: * another line of text */ +What is "reverse xmas tree"? +---------------------------- + +Netdev has a convention for ordering local variables in functions. +Order the variable declaration lines longest to shortest, e.g.:: + + struct scatterlist *sg; + struct sk_buff *skb; + int err, i; + +If there are dependencies between the variables preventing the ordering +move the initialization out of line. + I am working in existing code which uses non-standard formatting. Which formatting should I use? ------------------------------------------------------------------------------------------------ Make your code follow the most recent guidelines, so that eventually all code diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst index 009b07e5a0f3..bf8431386d26 100644 --- a/Documentation/sound/soc/dai.rst +++ b/Documentation/sound/soc/dai.rst @@ -10,7 +10,7 @@ AC97 ==== AC97 is a five wire interface commonly found on many PC sound cards. It is -now also popular in many portable devices. This DAI has a reset line and time +now also popular in many portable devices. This DAI has a RESET line and time multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines. The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 diff --git a/Documentation/translations/it_IT/core-api/symbol-namespaces.rst b/Documentation/translations/it_IT/core-api/symbol-namespaces.rst index 42f5d04e38ec..0f6898860d6d 100644 --- a/Documentation/translations/it_IT/core-api/symbol-namespaces.rst +++ b/Documentation/translations/it_IT/core-api/symbol-namespaces.rst @@ -50,9 +50,9 @@ Di conseguenza, nella tabella dei simboli del kernel ci sarà una voce rappresentata dalla struttura ``kernel_symbol`` che avrà il campo ``namespace`` (spazio dei nomi) impostato. Un simbolo esportato senza uno spazio dei nomi avrà questo campo impostato a ``NULL``. Non esiste uno spazio dei nomi -di base. Il programma ``modpost`` e il codice in kernel/module.c usano lo spazio -dei nomi, rispettivamente, durante la compilazione e durante il caricamento -di un modulo. +di base. Il programma ``modpost`` e il codice in kernel/module/main.c usano lo +spazio dei nomi, rispettivamente, durante la compilazione e durante il +caricamento di un modulo. 2.2 Usare il simbolo di preprocessore DEFAULT_SYMBOL_NAMESPACE ============================================================== diff --git a/Documentation/translations/zh_CN/core-api/kernel-api.rst b/Documentation/translations/zh_CN/core-api/kernel-api.rst index e45fe80d1cd8..962d31d019d7 100644 --- a/Documentation/translations/zh_CN/core-api/kernel-api.rst +++ b/Documentation/translations/zh_CN/core-api/kernel-api.rst @@ -224,7 +224,7 @@ kernel/kmod.c 模块接口支持 ------------ -更多信息请参考文件kernel/module.c。 +更多信息请参阅kernel/module/目录下的文件。 硬件接口 ======== diff --git a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst index 6abf7ed534ca..bb16f0611046 100644 --- a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst +++ b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst @@ -52,7 +52,7 @@ 相应的 ksymtab 条目结构体 ``kernel_symbol`` 将有相应的成员 ``命名空间`` 集。 导出时未指明命名空间的符号将指向 ``NULL`` 。如果没有定义命名空间，则默认没有。 -``modpost`` 和kernel/module.c分别在构建时或模块加载时使用名称空间。 +``modpost`` 和kernel/module/main.c分别在构建时或模块加载时使用名称空间。 2.2 使用DEFAULT_SYMBOL_NAMESPACE定义 ==================================== |