diff options
Diffstat (limited to 'Documentation')
7 files changed, 115 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index fd931b293816..b900973b5f7b 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "leadtek,ltk500hd1829"; diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index d0083301acbe..946dd354256c 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -96,12 +96,20 @@ properties: If set, reverse the bit order described in the data mappings below on all data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. + port: true + ports: true + required: - compatible - data-mapping - width-mm - height-mm - panel-timing - - port + +oneOf: + - required: + - port + - required: + - ports ... diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index d9fdb58e06b4..6913923df569 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -37,7 +37,6 @@ examples: dsi { #address-cells = <1>; #size-cells = <0>; - reg = <0xff450000 0x1000>; panel@0 { compatible = "xinpeng,xpp055c272"; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 7cd0e278ed85..a3ba2186d6a1 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -56,6 +56,9 @@ properties: - const: tx - const: rx + power-domains: + maxItems: 1 + rockchip,capture-channels: allOf: - $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt deleted file mode 100644 index ec20c1271e92..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Rockchip SPDIF transceiver - -The S/PDIF audio block is a stereo transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. - -Required properties: - -- compatible: should be one of the following: - - "rockchip,rk3066-spdif" - - "rockchip,rk3188-spdif" - - "rockchip,rk3228-spdif" - - "rockchip,rk3288-spdif" - - "rockchip,rk3328-spdif" - - "rockchip,rk3366-spdif" - - "rockchip,rk3368-spdif" - - "rockchip,rk3399-spdif" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the SPDIF interrupt. -- dmas: DMA specifiers for tx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should be "tx" -- clocks: a list of phandle + clock-specifier pairs, one for each entry - in clock-names. -- clock-names: should contain following: - - "hclk": clock for SPDIF controller - - "mclk" : clock for SPDIF bus - -Required properties on RK3288: - - rockchip,grf: the phandle of the syscon node for the general register - file (GRF) - -Example for the rk3188 SPDIF controller: - -spdif: spdif@1011e000 { - compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; - reg = <0x1011e000 0x2000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac1_s 8>; - dma-names = "tx"; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; - #sound-dai-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml new file mode 100644 index 000000000000..c467152656f7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPDIF transceiver + +description: + The S/PDIF audio block is a stereo transceiver that allows the + processor to receive and transmit digital audio via a coaxial or + fibre cable. + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk3066-spdif + - const: rockchip,rk3228-spdif + - const: rockchip,rk3328-spdif + - const: rockchip,rk3366-spdif + - const: rockchip,rk3368-spdif + - const: rockchip,rk3399-spdif + - items: + - enum: + - rockchip,rk3188-spdif + - rockchip,rk3288-spdif + - const: rockchip,rk3066-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock for SPDIF bus + - description: clock for SPDIF controller + + clock-names: + items: + - const: mclk + - const: hclk + + dmas: + maxItems: 1 + + dma-names: + const: tx + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + Required property on RK3288. + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + - "#sound-dai-cells" + +if: + properties: + compatible: + contains: + const: rockchip,rk3288-spdif + +then: + required: + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + spdif: spdif@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index 04d5c01a2e99..b80257a03830 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -1241,7 +1241,8 @@ When kbuild executes, the following steps are followed (roughly): will be displayed with "make KBUILD_VERBOSE=0". ---- 6.9 Preprocessing linker scripts +6.9 Preprocessing linker scripts +-------------------------------- When the vmlinux image is built, the linker script arch/$(ARCH)/kernel/vmlinux.lds is used. |