diff options
Diffstat (limited to 'Documentation')
166 files changed, 1107 insertions, 1118 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml index 192ded470e32..f0daf990e077 100644 --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -67,9 +67,9 @@ patternProperties: compatible: items: - enum: - - arm,integrator-ap-syscon - - arm,integrator-cp-syscon - - arm,integrator-sp-syscon + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml index d6e85d198afe..1d0b4e2bc7d2 100644 --- a/Documentation/devicetree/bindings/arm/arm,realview.yaml +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -55,20 +55,20 @@ properties: compatible: oneOf: - items: - - const: arm,realview-eb-soc - - const: simple-bus + - const: arm,realview-eb-soc + - const: simple-bus - items: - - const: arm,realview-pb1176-soc - - const: simple-bus + - const: arm,realview-pb1176-soc + - const: simple-bus - items: - - const: arm,realview-pb11mp-soc - - const: simple-bus + - const: arm,realview-pb11mp-soc + - const: simple-bus - items: - - const: arm,realview-pba8-soc - - const: simple-bus + - const: arm,realview-pba8-soc + - const: simple-bus - items: - - const: arm,realview-pbx-soc - - const: simple-bus + - const: arm,realview-pbx-soc + - const: simple-bus patternProperties: "^.*syscon@[0-9a-f]+$": @@ -79,35 +79,35 @@ properties: compatible: oneOf: - items: - - const: arm,realview-eb11mp-revb-syscon - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb11mp-revb-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-eb11mp-revc-syscon - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pb1176-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pb1176-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pb11mp-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pb11mp-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pba8-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pba8-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pbx-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pbx-syscon + - const: syscon + - const: simple-mfd required: - compatible diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index a3420c81cf35..26829a803fda 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -165,10 +165,10 @@ patternProperties: compatible: oneOf: - items: - - enum: - - arm,vexpress,v2m-p1 - - arm,vexpress,v2p-p1 - - const: simple-bus + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus - const: simple-bus motherboard: type: object @@ -186,8 +186,8 @@ patternProperties: compatible: items: - enum: - - arm,vexpress,v2m-p1 - - arm,vexpress,v2p-p1 + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml index b5ef2666e6b2..497600a2ffb9 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm28155-ap + - brcm,bcm28155-ap - const: brcm,bcm11351 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml index aafbd6a27708..e0ee931723dc 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm21664-garnet + - brcm,bcm21664-garnet - const: brcm,bcm21664 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml index c4b4efd28a55..40d12ea56e54 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm23550-sparrow + - brcm,bcm23550-sparrow - const: brcm,bcm23550 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml index fe111e72dac3..9ba7b16e1fc4 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom Cygnus device tree bindings maintainers: - - Ray Jui <rjui@broadcom.com> - - Scott Branden <sbranden@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> properties: $nodename: @@ -16,14 +16,14 @@ properties: compatible: items: - enum: - - brcm,bcm11300 - - brcm,bcm11320 - - brcm,bcm11350 - - brcm,bcm11360 - - brcm,bcm58300 - - brcm,bcm58302 - - brcm,bcm58303 - - brcm,bcm58305 + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 - const: brcm,cygnus ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml index 1158f49b0b83..ae614b6722c2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -21,7 +21,7 @@ properties: compatible: items: - enum: - - ubnt,unifi-switch8 + - ubnt,unifi-switch8 - const: brcm,bcm53342 - const: brcm,hr2 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml index 2451704f87f0..0749adf94c28 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - brcm,ns2-svk - - brcm,ns2-xmc + - brcm,ns2-svk + - brcm,ns2-xmc - const: brcm,ns2 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index fe364cebf57f..8c2cacb2bb4f 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -24,13 +24,13 @@ properties: compatible: items: - enum: - - brcm,bcm58522 - - brcm,bcm58525 - - brcm,bcm58535 - - brcm,bcm58622 - - brcm,bcm58623 - - brcm,bcm58625 - - brcm,bcm88312 + - brcm,bcm58522 + - brcm,bcm58525 + - brcm,bcm58535 + - brcm,bcm58622 + - brcm,bcm58623 + - brcm,bcm58625 + - brcm,bcm88312 - const: brcm,nsp ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml index 4ad2b2124ab4..c13cb96545a2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -16,9 +16,9 @@ properties: compatible: items: - enum: - - brcm,bcm958742k - - brcm,bcm958742t - - brcm,bcm958802a802x + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x - const: brcm,stingray ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml index c5b6f31c20b9..ccdf9f99cb2b 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -15,8 +15,8 @@ properties: compatible: items: - enum: - - brcm,vulcan-eval - - cavium,thunderx2-cn9900 + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 - const: brcm,vulcan-soc ... diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index 17df5cd12d8d..e42ff69d8bfb 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -82,12 +82,12 @@ properties: compatible: oneOf: - items: - - const: arm,coresight-cti - - const: arm,primecell + - const: arm,coresight-cti + - const: arm,primecell - items: - - const: arm,coresight-cti-v8-arch - - const: arm,coresight-cti - - const: arm,primecell + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell reg: maxItems: 1 @@ -191,16 +191,16 @@ patternProperties: anyOf: - required: - - arm,trig-in-sigs + - arm,trig-in-sigs - required: - - arm,trig-out-sigs + - arm,trig-out-sigs oneOf: - required: - - arm,trig-conn-name + - arm,trig-conn-name - required: - - cpu + - cpu - required: - - arm,cs-dev-assoc + - arm,cs-dev-assoc required: - reg diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 40f692c846f0..1222bf1831fa 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -330,8 +330,8 @@ if: - enable-method then: - required: - - secondary-boot-reg + required: + - secondary-boot-reg required: - device_type diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index f63895c8ce2d..6da9d734cdb7 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -273,8 +273,8 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board - const: fsl,imx6ull - description: Kontron N6411 S Board @@ -312,9 +312,12 @@ properties: - toradex,colibri-imx7d # Colibri iMX7 Dual Module - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on + # Aster Carrier Board + - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on + # Colibri Evaluation Board V3 + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on + # Colibri Evaluation Board V3 - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml index 4d925785f504..06a7b05f435f 100644 --- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml +++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml @@ -14,6 +14,6 @@ properties: compatible: items: - enum: - - intel,keembay-evm + - intel,keembay-evm - const: intel,keembay ... diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index e271c4682ebc..1af30174b2d0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -17,22 +17,22 @@ properties: compatible: oneOf: - items: - - enum: - - mediatek,mt2701-pericfg - - mediatek,mt2712-pericfg - - mediatek,mt6765-pericfg - - mediatek,mt7622-pericfg - - mediatek,mt7629-pericfg - - mediatek,mt8135-pericfg - - mediatek,mt8173-pericfg - - mediatek,mt8183-pericfg - - mediatek,mt8516-pericfg - - const: syscon + - enum: + - mediatek,mt2701-pericfg + - mediatek,mt2712-pericfg + - mediatek,mt6765-pericfg + - mediatek,mt7622-pericfg + - mediatek,mt7629-pericfg + - mediatek,mt8135-pericfg + - mediatek,mt8173-pericfg + - mediatek,mt8183-pericfg + - mediatek,mt8516-pericfg + - const: syscon - items: - # Special case for mt7623 for backward compatibility - - const: mediatek,mt7623-pericfg - - const: mediatek,mt2701-pericfg - - const: syscon + # Special case for mt7623 for backward compatibility + - const: mediatek,mt7623-pericfg + - const: mediatek,mt2701-pericfg + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml index 68b0131a31d0..37ba3337f944 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -19,7 +19,7 @@ description: | reported to the APB terminator (APB Errors Handler Block). allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 29e1aaea132b..0bee4694578a 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -23,7 +23,7 @@ description: | accessible by means of the Baikal-T1 System Controller. allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index 3d4e1685cc55..28c6461b9a9a 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -95,10 +95,10 @@ allOf: # Devices without builtin crystal properties: clock-names: - minItems: 1 - maxItems: 2 - items: - enum: [ xin, clkin ] + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] clocks: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index a952d5811823..5dd7ea8a78e4 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -47,12 +47,12 @@ properties: compatible: items: - enum: - - ingenic,jz4740-cgu - - ingenic,jz4725b-cgu - - ingenic,jz4770-cgu - - ingenic,jz4780-cgu - - ingenic,x1000-cgu - - ingenic,x1830-cgu + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu - const: simple-mfd minItems: 1 @@ -68,8 +68,8 @@ properties: items: - const: ext - enum: - - rtc - - osc32k # Different name, same clock + - rtc + - osc32k # Different name, same clock assigned-clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index 1b16a863b355..af32dee14fc6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -65,7 +65,7 @@ properties: protected-clocks: description: - Protected clock specifier list as per common clock binding + Protected clock specifier list as per common clock binding vdd-gfx-supply: description: diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml index b83f4138f2f8..9185d101737e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml @@ -19,15 +19,15 @@ description: properties: compatible: oneOf: - - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 - - const: renesas,r8a7740-cpg-clocks # R-Mobile A1 - - const: renesas,r8a7778-cpg-clocks # R-Car M1 - - const: renesas,r8a7779-cpg-clocks # R-Car H1 + - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 + - const: renesas,r8a7740-cpg-clocks # R-Mobile A1 + - const: renesas,r8a7778-cpg-clocks # R-Car M1 + - const: renesas,r8a7779-cpg-clocks # R-Car H1 - items: - - enum: - - renesas,r7s72100-cpg-clocks # RZ/A1H - - const: renesas,rz-cpg-clocks # RZ/A1 - - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 + - enum: + - renesas,r7s72100-cpg-clocks # RZ/A1H + - const: renesas,rz-cpg-clocks # RZ/A1 + - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 29813873cfbc..c6d091518650 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -16,7 +16,7 @@ properties: "#clock-cells": const: 1 - compatible : + compatible: enum: - sprd,sc9863a-ap-clk - sprd,sc9863a-aon-clk diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index 2c4c34e3bc29..04099f5bea3f 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -162,14 +162,13 @@ required: additionalProperties: false examples: - - | + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/imx8mq-reset.h> - #include <dt-bindings/clock/imx8mq-clock.h> - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/reset/imx8mq-reset.h> - - mipi_dsi: mipi_dsi@30a00000 { + mipi_dsi: mipi_dsi@30a00000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mq-nwl-dsi"; @@ -224,4 +223,4 @@ examples: }; }; }; - }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index 98c7330a9485..baaf2a2a6fed 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -119,17 +119,17 @@ then: # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. # These clocks are optional. - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 required: - clock-names diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 0880cbf217d5..3ddb35fcf0a2 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -18,16 +18,16 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ths8134a - - ti,ths8134b - - const: ti,ths8134 + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 - enum: - - adi,adv7123 - - dumb-vga-dac - - ti,opa362 - - ti,ths8134 - - ti,ths8135 + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 ports: type: object diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index 85b71b1fd28a..a02039e3aca0 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -55,11 +55,11 @@ patternProperties: clock-master: type: boolean description: - Should be enabled if the host is being used in conjunction with - another DSI host to drive the same peripheral. Hardware supporting - such a configuration generally requires the data on both the busses - to be driven by the same clock. Only the DSI host instance - controlling this clock should contain this property. + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. enforce-video-mode: type: boolean diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml index 66e93e563653..aecff34f505d 100644 --- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -21,9 +21,9 @@ properties: items: - enum: # Waveshare 3.5" 320x480 Color TFT LCD - - waveshare,rpi-lcd-35 + - waveshare,rpi-lcd-35 # Ozzmaker 3.5" 320x480 Color TFT LCD - - ozzmaker,piscreen + - ozzmaker,piscreen - const: ilitek,ili9486 spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml index 5bfc33eb32c9..12064a8e7a92 100644 --- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml @@ -13,11 +13,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4725b-ipu - - ingenic,jz4760-ipu + - ingenic,jz4725b-ipu + - ingenic,jz4760-ipu - items: - - const: ingenic,jz4770-ipu - - const: ingenic,jz4760-ipu + - const: ingenic,jz4770-ipu + - const: ingenic,jz4760-ipu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml index d56db1802fad..768050f30dba 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -58,11 +58,11 @@ properties: - port@0 required: - - compatible - - reg - - interrupts - - clocks - - clock-names + - compatible + - reg + - interrupts + - clocks + - clock-names if: properties: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 0b8736a9384e..53056dd02597 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -38,10 +38,10 @@ properties: clocks: items: - - description: GMU clock - - description: GPU CX clock - - description: GPU AXI clock - - description: GPU MEMNOC clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock clock-names: items: @@ -52,8 +52,8 @@ properties: interrupts: items: - - description: GMU HFI interrupt - - description: GMU interrupt + - description: GMU HFI interrupt + - description: GMU interrupt interrupt-names: @@ -62,14 +62,14 @@ properties: - const: gmu power-domains: - items: - - description: CX power domain - - description: GX power domain + items: + - description: CX power domain + - description: GX power domain power-domain-names: - items: - - const: cx - - const: gx + items: + - const: cx + - const: gx iommus: maxItems: 1 @@ -90,13 +90,13 @@ required: - operating-points-v2 examples: - - | - #include <dt-bindings/clock/qcom,gpucc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - gmu: gmu@506a000 { + gmu: gmu@506a000 { compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0x506a000 0x30000>, @@ -120,4 +120,4 @@ examples: iommus = <&adreno_smmu 5>; operating-points-v2 = <&gmu_opp_table>; - }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 083d2b9d0c69..75a09df68ba0 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -24,9 +24,9 @@ properties: reg: true reset-gpios: true vdd-supply: - description: core voltage supply + description: core voltage supply vddio-supply: - description: vddio supply + description: vddio supply required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 7f5df5851017..38bc1d1b511e 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -48,12 +48,12 @@ properties: port: true required: - - compatible - - reg - - enable-gpios - - pp1800-supply - - avdd-supply - - avee-supply + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index aa761f697b7a..7adb83e2e8d9 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 927f1eea18d2..81adb82f061d 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -19,11 +19,11 @@ properties: backlight: true reset-gpios: true avdd-supply: - description: regulator that supplies the AVDD voltage + description: regulator that supplies the AVDD voltage dvdd-supply: - description: regulator that supplies the DVDD voltage + description: regulator that supplies the DVDD voltage cvdd-supply: - description: regulator that supplies the CVDD voltage + description: regulator that supplies the CVDD voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 177d48c5bd97..e89c1ea62ffa 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -25,8 +25,7 @@ properties: compatible: items: - enum: - - dlink,dir-685-panel - + - dlink,dir-685-panel - const: ilitek,ili9322 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index a39332276bab..76a9068a85dd 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,8 +13,7 @@ properties: compatible: items: - enum: - - bananapi,lhr050h41 - + - bananapi,lhr050h41 - const: ilitek,ili9881c backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a372bdc5bde1..3715882b63b6 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -21,9 +21,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index b900973b5f7b..c5944b4d636c 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vcc-supply: - description: regulator that supplies the vcc voltage + description: regulator that supplies the vcc voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 73d2ff3baaff..bc92928c805b 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -25,9 +25,9 @@ properties: reg: true reset-gpios: true vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage backlight: true required: diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml index d766c949c622..4a36aa64c716 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -27,10 +27,10 @@ properties: compatible: items: - enum: - - motorola,droid4-panel # Panel from Motorola Droid4 phone - - nokia,himalaya # Panel from Nokia N950 phone - - tpo,taal # Panel from OMAP4 SDP board - - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 182c19cb7fdd..9bf592dc3033 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -59,7 +59,7 @@ description: | properties: clock-frequency: - description: Panel clock in Hz + description: Panel clock in Hz hactive: $ref: /schemas/types.yaml#/definitions/uint32 @@ -200,15 +200,15 @@ properties: description: Enable double clock mode required: - - clock-frequency - - hactive - - vactive - - hfront-porch - - hback-porch - - hsync-len - - vfront-porch - - vback-porch - - vsync-len + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml index a35ba16fc000..39477793d289 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -10,8 +10,8 @@ maintainers: - Philippe CORNU <philippe.cornu@st.com> description: | - The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD - panel connected using a MIPI-DSI video interface. + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index 7a685d0428b3..44ce98f68705 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -18,9 +18,9 @@ properties: reg: true reset-gpios: true vdd3-supply: - description: core voltage supply + description: core voltage supply vci-supply: - description: voltage supply for analog circuits + description: voltage supply for analog circuits required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index b36f39f6b233..076b057b4af5 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Visionox model RM69299 Panels Device Tree Bindings. maintainers: - - Harigovindan P <harigovi@codeaurora.org> + - Harigovindan P <harigovi@codeaurora.org> description: | This binding is for display panels using a Visionox RM692999 panel. diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 3be76d15bf6c..69cc7e8bf15a 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -45,7 +45,7 @@ properties: phy-dsi-supply: description: - Phandle of the regulator that provides the supply voltage. + Phandle of the regulator that provides the supply voltage. ports: type: object @@ -147,4 +147,3 @@ examples: ... - diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index bbd76591c180..173730d56334 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -78,7 +78,7 @@ properties: - const: vp4 interrupts: - items: + items: - description: common_m DSS Master common - description: common_s0 DSS Shared common 0 - description: common_s1 DSS Shared common 1 diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index 3bbe9521c0bc..4cc011230153 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -56,8 +56,8 @@ properties: memory-region: description: - phandle to a node describing reserved memory (System RAM memory) - used by DSP (see bindings/reserved-memory/reserved-memory.txt) + phandle to a node describing reserved memory (System RAM memory) + used by DSP (see bindings/reserved-memory/reserved-memory.txt) maxItems: 1 required: diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index c9534d2164a2..822975dbeafa 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -177,10 +177,10 @@ properties: dependencies: # 'vendor,bool-property' is only allowed when 'vendor,string-array-property' # is present - vendor,bool-property: [ vendor,string-array-property ] + vendor,bool-property: [ 'vendor,string-array-property' ] # Expressing 2 properties in both orders means all of the set of properties # must be present or none of them. - vendor,string-array-property: [ vendor,bool-property ] + vendor,string-array-property: [ 'vendor,bool-property' ] required: - compatible diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index 893d81e54caa..b26d4b4be743 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: IBM FSI-attached SPI controllers maintainers: - - Eddie James <eajames@linux.ibm.com> + - Eddie James <eajames@linux.ibm.com> description: | This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 4f2cbd8307a7..c213cb9ddb9f 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -19,10 +19,8 @@ properties: reg: items: - - description: the I/O address containing the GPIO controller - registers. - - description: the I/O address containing the Chip Common A interrupt - registers. + - description: the I/O address containing the GPIO controller registers. + - description: the I/O address containing the Chip Common A interrupt registers. gpio-controller: true diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml index 397d9383d15a..3ad229307bd5 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -13,39 +13,39 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,gpio-r8a7778 # R-Car M1 - - renesas,gpio-r8a7779 # R-Car H1 - - const: renesas,rcar-gen1-gpio # R-Car Gen1 + - enum: + - renesas,gpio-r8a7778 # R-Car M1 + - renesas,gpio-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-gpio # R-Car Gen1 - items: - - enum: - - renesas,gpio-r8a7742 # RZ/G1H - - renesas,gpio-r8a7743 # RZ/G1M - - renesas,gpio-r8a7744 # RZ/G1N - - renesas,gpio-r8a7745 # RZ/G1E - - renesas,gpio-r8a77470 # RZ/G1C - - renesas,gpio-r8a7790 # R-Car H2 - - renesas,gpio-r8a7791 # R-Car M2-W - - renesas,gpio-r8a7792 # R-Car V2H - - renesas,gpio-r8a7793 # R-Car M2-N - - renesas,gpio-r8a7794 # R-Car E2 - - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 + - enum: + - renesas,gpio-r8a7742 # RZ/G1H + - renesas,gpio-r8a7743 # RZ/G1M + - renesas,gpio-r8a7744 # RZ/G1N + - renesas,gpio-r8a7745 # RZ/G1E + - renesas,gpio-r8a77470 # RZ/G1C + - renesas,gpio-r8a7790 # R-Car H2 + - renesas,gpio-r8a7791 # R-Car M2-W + - renesas,gpio-r8a7792 # R-Car V2H + - renesas,gpio-r8a7793 # R-Car M2-N + - renesas,gpio-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 - items: - - enum: - - renesas,gpio-r8a774a1 # RZ/G2M - - renesas,gpio-r8a774b1 # RZ/G2N - - renesas,gpio-r8a774c0 # RZ/G2E - - renesas,gpio-r8a7795 # R-Car H3 - - renesas,gpio-r8a7796 # R-Car M3-W - - renesas,gpio-r8a77961 # R-Car M3-W+ - - renesas,gpio-r8a77965 # R-Car M3-N - - renesas,gpio-r8a77970 # R-Car V3M - - renesas,gpio-r8a77980 # R-Car V3H - - renesas,gpio-r8a77990 # R-Car E3 - - renesas,gpio-r8a77995 # R-Car D3 - - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 + - enum: + - renesas,gpio-r8a774a1 # RZ/G2M + - renesas,gpio-r8a774b1 # RZ/G2N + - renesas,gpio-r8a774c0 # RZ/G2E + - renesas,gpio-r8a7795 # R-Car H3 + - renesas,gpio-r8a7796 # R-Car M3-W + - renesas,gpio-r8a77961 # R-Car M3-W+ + - renesas,gpio-r8a77965 # R-Car M3-N + - renesas,gpio-r8a77970 # R-Car V3M + - renesas,gpio-r8a77980 # R-Car V3H + - renesas,gpio-r8a77990 # R-Car E3 + - renesas,gpio-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index e1ac6ff5a230..4843df1ddbb6 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -26,7 +26,8 @@ properties: - description: AXI/master interface clock - description: GPU core clock - description: Shader clock (only required if GPU has feature PIPE_3D) - - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) + - description: AHB/slave interface clock (only required if GPU can gate + slave interface independently) minItems: 1 maxItems: 4 diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index af35b77053df..7898b9dba5a5 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -19,7 +19,7 @@ description: |+ properties: compatible: enum: - - adi,axi-fan-control-1.00.a + - adi,axi-fan-control-1.00.a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index 869f2ae3d5b3..810536953177 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -20,22 +20,22 @@ properties: - const: fsl,imx1-i2c - items: - enum: - - fsl,imx25-i2c - - fsl,imx27-i2c - - fsl,imx31-i2c - - fsl,imx50-i2c - - fsl,imx51-i2c - - fsl,imx53-i2c - - fsl,imx6q-i2c - - fsl,imx6sl-i2c - - fsl,imx6sx-i2c - - fsl,imx6sll-i2c - - fsl,imx6ul-i2c - - fsl,imx7s-i2c - - fsl,imx8mq-i2c - - fsl,imx8mm-i2c - - fsl,imx8mn-i2c - - fsl,imx8mp-i2c + - fsl,imx25-i2c + - fsl,imx27-i2c + - fsl,imx31-i2c + - fsl,imx50-i2c + - fsl,imx51-i2c + - fsl,imx53-i2c + - fsl,imx6q-i2c + - fsl,imx6sl-i2c + - fsl,imx6sx-i2c + - fsl,imx6sll-i2c + - fsl,imx6ul-i2c + - fsl,imx7s-i2c + - fsl,imx8mq-i2c + - fsl,imx8mm-i2c + - fsl,imx8mn-i2c + - fsl,imx8mp-i2c - const: fsl,imx21-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml index da6e8bdc4037..015885dd02d3 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -16,8 +16,8 @@ allOf: required: - mrvl,i2c-polling then: - required: - - interrupts + required: + - interrupts properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 5117ad68a584..cbb8819d7069 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -53,10 +53,10 @@ properties: standby-gpios: description: - Must be the device tree identifier of the STBY pin. This pin is used - to place the AD7606 into one of two power-down modes, Standby mode or - Shutdown mode. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. + Must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. maxItems: 1 adi,first-data-gpios: diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml index a0ebb4680140..cccd3033a55b 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -10,7 +10,7 @@ maintainers: - Jonathan Cameron <jic23@kernel.org> description: | - Family of simple ADCs with i2c inteface and internal references. + Family of simple ADCs with i2c inteface and internal references. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index e6263b617941..a6ac289d98da 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -24,11 +24,11 @@ properties: - const: qcom,spmi-adc-rev2 - items: - - enum: - - qcom,spmi-vadc - - qcom,spmi-adc5 - - qcom,spmi-adc-rev2 - - qcom,spmi-adc7 + - enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -101,12 +101,11 @@ patternProperties: - $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - items: - - const: 1 - - enum: [ 1, 3, 4, 6, 20, 8, 10 ] - + - const: 1 + - enum: [ 1, 3, 4, 6, 20, 8, 10 ] - items: - - const: 10 - - const: 81 + - const: 10 + - const: 81 qcom,ratiometric: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index bcff82a423bc..1bb76197787b 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -17,10 +17,10 @@ properties: - const: rockchip,rk3399-saradc - items: - enum: - - rockchip,px30-saradc - - rockchip,rk3308-saradc - - rockchip,rk3328-saradc - - rockchip,rv1108-saradc + - rockchip,px30-saradc + - rockchip,rk3308-saradc + - rockchip,rk3328-saradc + - rockchip,rv1108-saradc - const: rockchip,rk3399-saradc reg: diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 1c6d49685e9f..5342360e96b1 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: HMC425A 6-bit Digital Step Attenuator maintainers: -- Michael Hennerich <michael.hennerich@analog.com> -- Beniamin Bia <beniamin.bia@analog.com> + - Michael Hennerich <michael.hennerich@analog.com> + - Beniamin Bia <beniamin.bia@analog.com> description: | Digital Step Attenuator IIO device with gpio interface. diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml index 69e8931e0ae8..9a89b34bdd8f 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -31,10 +31,10 @@ properties: - atlas,co2-ezo reg: - maxItems: 1 + maxItems: 1 interrupts: - maxItems: 1 + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 58d81ca43460..82424e06be27 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -61,17 +61,17 @@ properties: const: 0 adi,range-microamp: - description: Output range of the channel. - oneOf: - - items: - - const: 0 - - const: 300000 - - items: - - const: -60000 - - const: 0 - - items: - - const: -60000 - - const: 300000 + description: Output range of the channel. + oneOf: + - items: + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 channel@1: description: Represents an external channel which are @@ -84,10 +84,10 @@ properties: const: 1 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 140000, 250000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [140000, 250000] channel@2: description: Represents an external channel which are @@ -100,10 +100,10 @@ properties: const: 2 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 55000, 150000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [55000, 150000] patternProperties: "^channel@([3-5])$": @@ -116,19 +116,19 @@ patternProperties: maximum: 5 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 45000, 100000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [45000, 100000] required: -- reg -- channel@0 -- channel@1 -- channel@2 -- channel@3 -- channel@4 -- channel@5 + - reg + - channel@0 + - channel@1 + - channel@2 + - channel@3 + - channel@4 + - channel@5 examples: - | diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml index da8f2e872535..58887a4f9c15 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml @@ -36,15 +36,15 @@ required: additionalProperties: false examples: -- | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@51 { - compatible = "vishay,vcnl4200"; - reg = <0x51>; - proximity-near-level = <220>; - }; - }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@51 { + compatible = "vishay,vcnl4200"; + reg = <0x51>; + proximity-near-level = <220>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index f4393bfbf355..f0b336ac39c9 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -13,15 +13,15 @@ properties: compatible: oneOf: - enum: - - asahi-kasei,ak8975 - - asahi-kasei,ak8963 - - asahi-kasei,ak09911 - - asahi-kasei,ak09912 + - asahi-kasei,ak8975 + - asahi-kasei,ak8963 + - asahi-kasei,ak09911 + - asahi-kasei,ak09912 - enum: - - ak8975 - - ak8963 - - ak09911 - - ak09912 + - ak8975 + - ak8963 + - ak09911 + - ak09912 deprecated: true reg: diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml index 4190253336ec..51dba64037f6 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -39,8 +39,8 @@ properties: description: The driver current for the LED used in proximity sensing. enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, - 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, - 180000, 190000, 200000] + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, + 180000, 190000, 200000] default: 20000 required: diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 40ccbe7b5c13..0f79d9a01c49 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -307,7 +307,7 @@ patternProperties: mode. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, - 500000, 1000000] + 500000, 1000000] adi,custom-thermistor: description: diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml index 7432c6e8cf3a..f21db81206b4 100644 --- a/Documentation/devicetree/bindings/input/imx-keypad.yaml +++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml @@ -24,19 +24,19 @@ properties: - const: fsl,imx21-kpp - items: - enum: - - fsl,imx25-kpp - - fsl,imx27-kpp - - fsl,imx31-kpp - - fsl,imx35-kpp - - fsl,imx51-kpp - - fsl,imx53-kpp - - fsl,imx50-kpp - - fsl,imx6q-kpp - - fsl,imx6sx-kpp - - fsl,imx6sl-kpp - - fsl,imx6sll-kpp - - fsl,imx6ul-kpp - - fsl,imx7d-kpp + - fsl,imx25-kpp + - fsl,imx27-kpp + - fsl,imx31-kpp + - fsl,imx35-kpp + - fsl,imx51-kpp + - fsl,imx53-kpp + - fsl,imx50-kpp + - fsl,imx6q-kpp + - fsl,imx6sx-kpp + - fsl,imx6sl-kpp + - fsl,imx6sll-kpp + - fsl,imx6ul-kpp + - fsl,imx7d-kpp - const: fsl,imx21-kpp reg: diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml index 8c73e5264312..3225c8d1fdaf 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml @@ -51,7 +51,7 @@ required: - touchscreen-max-pressure examples: -- | + - | #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 024b262a2ef7..4ce109476a0e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -20,11 +20,11 @@ maintainers: allOf: - $ref: touchscreen.yaml# - if: - properties: - compatible: - contains: - enum: - - evervision,ev-ft5726 + properties: + compatible: + contains: + enum: + - evervision,ev-ft5726 then: properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index e81cfa56f25a..da5b0d87e16d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -35,9 +35,8 @@ properties: maxItems: 1 irq-gpios: - description: GPIO pin used for IRQ. - The driver uses the interrupt gpio pin as - output to reset the device. + description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin + as output to reset the device. maxItems: 1 reset-gpios: diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index d7dac16a3960..36dc7b56a453 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -33,8 +33,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-min-pressure: - description: minimum pressure on the touchscreen to be achieved in order for the - touchscreen driver to report a touch event. + description: minimum pressure on the touchscreen to be achieved in order + for the touchscreen driver to report a touch event. $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-fuzz-x: @@ -46,13 +46,13 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-fuzz-pressure: - description: pressure noise value of the absolute input device (arbitrary range - dependent on the controller) + description: pressure noise value of the absolute input device (arbitrary + range dependent on the controller) $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-average-samples: - description: Number of data samples which are averaged for each read (valid values - dependent on the controller) + description: Number of data samples which are averaged for each read (valid + values dependent on the controller) $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-inverted-x: diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index ff09550ad959..a8873739d61a 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -25,17 +25,17 @@ properties: compatible: oneOf: - items: - - enum: - - fsl,imx8mn-nic - - fsl,imx8mm-nic - - fsl,imx8mq-nic - - const: fsl,imx8m-nic + - enum: + - fsl,imx8mn-nic + - fsl,imx8mm-nic + - fsl,imx8mq-nic + - const: fsl,imx8m-nic - items: - - enum: - - fsl,imx8mn-noc - - fsl,imx8mm-noc - - fsl,imx8mq-noc - - const: fsl,imx8m-noc + - enum: + - fsl,imx8mn-noc + - fsl,imx8mm-noc + - fsl,imx8mq-noc + - const: fsl,imx8m-noc - const: fsl,imx8m-nic reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml index d01bac80d416..8659048f92a7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SC7180 Network-On-Chip Interconnect +title: Qualcomm SC7180 Network-On-Chip Interconnect maintainers: - Odelu Kukatla <okukatla@codeaurora.org> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml index 74536747b51d..dab17c0716ce 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SDM845 Network-On-Chip Interconnect +title: Qualcomm SDM845 Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 96f8803ff4e6..06889963dfb7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -42,8 +42,8 @@ properties: - items: - const: arm,gic-400 - enum: - - arm,cortex-a15-gic - - arm,cortex-a7-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic - items: - const: arm,arm1176jzf-devchip-gic diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 28b27e1a6e9d..02a3cf470518 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -16,20 +16,20 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-intc - - ingenic,jz4760-intc - - ingenic,jz4780-intc + - ingenic,jz4740-intc + - ingenic,jz4760-intc + - ingenic,jz4780-intc - items: - - enum: - - ingenic,jz4775-intc - - ingenic,jz4770-intc - - const: ingenic,jz4760-intc + - enum: + - ingenic,jz4775-intc + - ingenic,jz4770-intc + - const: ingenic,jz4760-intc - items: - - const: ingenic,x1000-intc - - const: ingenic,jz4780-intc + - const: ingenic,x1000-intc + - const: ingenic,jz4780-intc - items: - - const: ingenic,jz4725b-intc - - const: ingenic,jz4740-intc + - const: ingenic,jz4725b-intc + - const: ingenic,jz4740-intc "#interrupt-cells": const: 1 diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 32e0896c6bc1..47938e372987 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -79,7 +79,8 @@ properties: description: | kHz; switching frequency. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, + 2400, 3200, 4800, 9600 ] qcom,ovp: description: | diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 3b35eb5ac3f9..8a3470b64d06 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -29,12 +29,12 @@ properties: - const: fsl,imx8-mu-scu - items: - enum: - - fsl,imx7s-mu - - fsl,imx8mq-mu - - fsl,imx8mm-mu - - fsl,imx8mn-mu - - fsl,imx8mp-mu - - fsl,imx8qxp-mu + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qxp-mu - const: fsl,imx6sx-mu - description: To communicate with i.MX8 SCU with fast IPC items: diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 4ac2123d9193..168beeb7e9f7 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -24,7 +24,7 @@ properties: compatible: items: - enum: - - qcom,sm8250-ipcc + - qcom,sm8250-ipcc - const: qcom,ipcc reg: diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml index 75196d11da58..a258832d520c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml @@ -20,8 +20,8 @@ properties: oneOf: - const: allwinner,sun8i-a83t-de2-rotate - items: - - const: allwinner,sun50i-a64-de2-rotate - - const: allwinner,sun8i-a83t-de2-rotate + - const: allwinner,sun50i-a64-de2-rotate + - const: allwinner,sun8i-a83t-de2-rotate reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 8707df613f6c..6a56214c6cfd 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -20,8 +20,8 @@ properties: oneOf: - const: allwinner,sun8i-h3-deinterlace - items: - - const: allwinner,sun50i-a64-deinterlace - - const: allwinner,sun8i-h3-deinterlace + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml index e0084b272b25..d8c54f9d9506 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml @@ -17,17 +17,17 @@ properties: compatible: items: - enum: - - adi,adv7180 - - adi,adv7180cp - - adi,adv7180st - - adi,adv7182 - - adi,adv7280 - - adi,adv7280-m - - adi,adv7281 - - adi,adv7281-m - - adi,adv7281-ma - - adi,adv7282 - - adi,adv7282-m + - adi,adv7180 + - adi,adv7180cp + - adi,adv7180st + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m reg: maxItems: 1 @@ -58,17 +58,16 @@ allOf: - if: properties: compatible: - items: - - enum: - - adi,adv7180 - - adi,adv7182 - - adi,adv7280 - - adi,adv7280-m - - adi,adv7281 - - adi,adv7281-m - - adi,adv7281-ma - - adi,adv7282 - - adi,adv7282-m + enum: + - adi,adv7180 + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m then: required: - port diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml index 5ad4b8c356cf..107c862a7fc7 100644 --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms +title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms maintainers: - Jacopo Mondi <jacopo+renesas@jmondi.org> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index e7b543159d15..9ea827092fdd 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -49,7 +49,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ports: type: object diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml index 1956b2a32bf4..cde85553fd01 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -138,4 +138,5 @@ examples: }; }; }; -...
\ No newline at end of file +... + diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index c9e068231d4b..6d282585d0b9 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -19,15 +19,15 @@ properties: compatible: items: - enum: - - renesas,r8a774a1-csi2 # RZ/G2M - - renesas,r8a774b1-csi2 # RZ/G2N - - renesas,r8a774c0-csi2 # RZ/G2E - - renesas,r8a7795-csi2 # R-Car H3 - - renesas,r8a7796-csi2 # R-Car M3-W - - renesas,r8a77965-csi2 # R-Car M3-N - - renesas,r8a77970-csi2 # R-Car V3M - - renesas,r8a77980-csi2 # R-Car V3H - - renesas,r8a77990-csi2 # R-Car E3 + - renesas,r8a774a1-csi2 # RZ/G2M + - renesas,r8a774b1-csi2 # RZ/G2N + - renesas,r8a774c0-csi2 # RZ/G2E + - renesas,r8a7795-csi2 # R-Car H3 + - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77965-csi2 # R-Car M3-N + - renesas,r8a77970-csi2 # R-Car V3M + - renesas,r8a77980-csi2 # R-Car V3H + - renesas,r8a77990-csi2 # R-Car E3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 2b629456d75f..c81dbc3e8960 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -31,8 +31,8 @@ properties: oneOf: - const: vdpu - items: - - const: vepu - - const: vdpu + - const: vepu + - const: vdpu clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml index 7b9407c0520e..2961a5b6872f 100644 --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -25,7 +25,7 @@ properties: compatible: items: - enum: - - xlnx,mipi-csi2-rx-subsystem-5.0 + - xlnx,mipi-csi2-rx-subsystem-5.0 reg: maxItems: 1 @@ -65,13 +65,12 @@ properties: 0x2d - RAW14 0x2e - RAW16 0x2f - RAW20 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - anyOf: - - minimum: 0x1e - - maximum: 0x24 - - minimum: 0x28 - - maximum: 0x2f + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - minimum: 0x1e + maximum: 0x24 + - minimum: 0x28 + maximum: 0x2f xlnx,vfb: type: boolean diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index dee5131c0361..68484136a510 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -15,12 +15,12 @@ properties: - const: fsl,imx6q-mmdc - items: - enum: - - fsl,imx6qp-mmdc - - fsl,imx6sl-mmdc - - fsl,imx6sll-mmdc - - fsl,imx6sx-mmdc - - fsl,imx6ul-mmdc - - fsl,imx7ulp-mmdc + - fsl,imx6qp-mmdc + - fsl,imx6sl-mmdc + - fsl,imx6sll-mmdc + - fsl,imx6sx-mmdc + - fsl,imx6ul-mmdc + - fsl,imx7ulp-mmdc - const: fsl,imx6q-mmdc reg: diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml index 17ba45a6c260..fe0ce191a851 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml @@ -16,11 +16,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-nemc - - ingenic,jz4780-nemc + - ingenic,jz4740-nemc + - ingenic,jz4780-nemc - items: - - const: ingenic,jz4725b-nemc - - const: ingenic,jz4740-nemc + - const: ingenic,jz4725b-nemc + - const: ingenic,jz4740-nemc "#address-cells": const: 2 diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 660005601a7f..7bfe120e14c3 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -26,10 +26,10 @@ properties: compatible: items: - enum: - - renesas,r8a77970-rpc-if # R-Car V3M - - renesas,r8a77980-rpc-if # R-Car V3H - - renesas,r8a77995-rpc-if # R-Car D3 - - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device + - renesas,r8a77970-rpc-if # R-Car V3M + - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77995-rpc-if # R-Car D3 + - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device reg: items: diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml index a5531f6caf12..499c62c04daa 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -98,11 +98,11 @@ allOf: description: Databus power supply. - if: - properties: - compatible: - contains: - enum: - - cirrus,cs47l15 + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 then: required: - MICVDD-supply @@ -174,24 +174,24 @@ properties: "mclk3" For the clock supplied on MCLK3. oneOf: - items: - - const: mclk1 + - const: mclk1 - items: - - const: mclk2 + - const: mclk2 - items: - - const: mclk3 + - const: mclk3 - items: - - const: mclk1 - - const: mclk2 + - const: mclk1 + - const: mclk2 - items: - - const: mclk1 - - const: mclk3 + - const: mclk1 + - const: mclk3 - items: - - const: mclk2 - - const: mclk3 + - const: mclk2 + - const: mclk3 - items: - - const: mclk1 - - const: mclk2 - - const: mclk3 + - const: mclk1 + - const: mclk2 + - const: mclk3 AVDD-supply: description: diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 487a8445722e..7fd232699f16 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -89,8 +89,8 @@ properties: description: Values of resistors for divider on raw ADC input maxItems: 2 items: - minimum: 1000 - maximum: 1000000 + minimum: 1000 + maximum: 1000000 gw,voltage-offset-microvolt: description: | diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index dd995d7dc1a6..305123e74a58 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -113,8 +113,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -135,8 +135,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -154,8 +154,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -172,8 +172,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -198,8 +198,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -220,8 +220,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 03d0a232c75e..c8fd5d3e3071 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -24,12 +24,11 @@ maintainers: properties: compatible: - anyOf: - - items: - - enum: - - ti,j721e-system-controller - - const: syscon - - const: simple-mfd + items: + - enum: + - ti,j721e-system-controller + - const: syscon + - const: simple-mfd "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml index 4c0106cea36d..9e762d474218 100644 --- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -73,13 +73,13 @@ allOf: required: - DBVDD3-supply - if: - properties: - compatible: - contains: - enum: - - cirrus,cs47l24 - - wlf,wm1831 - - wlf,wm8997 + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + - wlf,wm8997 then: properties: SPKVDD-supply: @@ -183,12 +183,12 @@ properties: clock supplied on MCLK2, recommended to be an always on 32k clock. oneOf: - items: - - const: mclk1 + - const: mclk1 - items: - - const: mclk2 + - const: mclk2 - items: - - const: mclk1 - - const: mclk2 + - const: mclk1 + - const: mclk2 reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml index 7a386a5b8fcb..0cd74c3116f8 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -21,9 +21,9 @@ properties: compatible: items: - enum: - - amlogic,meson8-sdhc - - amlogic,meson8b-sdhc - - amlogic,meson8m2-sdhc + - amlogic,meson8-sdhc + - amlogic,meson8b-sdhc + - amlogic,meson8m2-sdhc - const: amlogic,meson-mx-sdhc reg: diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml index e60bfe980ab3..9b63df1c22fb 100644 --- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -16,14 +16,14 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-mmc - - ingenic,jz4725b-mmc - - ingenic,jz4760-mmc - - ingenic,jz4780-mmc - - ingenic,x1000-mmc + - ingenic,jz4740-mmc + - ingenic,jz4725b-mmc + - ingenic,jz4760-mmc + - ingenic,jz4780-mmc + - ingenic,x1000-mmc - items: - - const: ingenic,jz4770-mmc - - const: ingenic,jz4760-mmc + - const: ingenic,jz4770-mmc + - const: ingenic,jz4760-mmc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index e5dbc20456e5..b4c3fd40caeb 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -130,9 +130,9 @@ then: required: - clock-names description: - The internal card detection logic that exists in these controllers is - sectioned off to be run by a separate second clock source to allow - the main core clock to be turned off to save power. + The internal card detection logic that exists in these controllers is + sectioned off to be run by a separate second clock source to allow + the main core clock to be turned off to save power. unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml index cb9794edff24..b32876933269 100644 --- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml @@ -14,12 +14,10 @@ maintainers: properties: compatible: - oneOf: - - items: - - enum: + items: + - enum: - xlnx,zynqmp-nand-controller - - enum: - - arasan,nfc-v3p10 + - const: arasan,nfc-v3p10 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index 354cb63feea3..3201372b7f85 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale General-Purpose Media Interface (GPMI) binding +title: Freescale General-Purpose Media Interface (GPMI) binding maintainers: - Han Xu <han.xu@nxp.com> diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml index ee4d1d026fd8..73b86f2226c7 100644 --- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale's mxc_nand binding +title: Freescale's mxc_nand binding maintainers: - Uwe Kleine-König <u.kleine-koenig@pengutronix.de> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 6ae7de15d172..28a08ff407db 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -42,7 +42,7 @@ patternProperties: const: 512 nand-ecc-strength: - enum: [1, 4 ,8 ] + enum: [1, 4, 8] allOf: - $ref: "nand-controller.yaml#" diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index faea214339ca..6a1ec50ad4fd 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -85,8 +85,8 @@ patternProperties: oneOf: - required: - - ports + - ports - required: - - ethernet-ports + - ethernet-ports ... diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index a3561276e609..8594f114f016 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -43,7 +43,7 @@ description: properties: compatible: - const: "qcom,sdm845-ipa" + const: "qcom,sdm845-ipa" reg: items: @@ -64,7 +64,7 @@ properties: maxItems: 1 clock-names: - const: core + const: core interrupts: items: @@ -96,8 +96,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - - description: Whether the "ipa-clock-enabled" state bit is valid - - description: Whether the IPA clock is enabled (if valid) + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: $ref: /schemas/types.yaml#/definitions/string-array @@ -140,9 +140,9 @@ required: oneOf: - required: - - modem-init + - modem-init - required: - - memory-region + - memory-region examples: - | diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index 7d84a863b9b9..cbacc04fc9e6 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -46,10 +46,10 @@ properties: clock-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy - const: ether # for others resets: @@ -59,8 +59,8 @@ properties: reset-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether + - const: gio + - const: ether - const: ether # for others socionext,syscon-phy-mode: diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fafa34cebdb1..e5dff66df481 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -48,11 +48,11 @@ properties: minItems: 3 maxItems: 5 items: - - description: GMAC main clock - - description: MAC TX clock - - description: MAC RX clock - - description: For MPU family, used for power mode - - description: For MPU family, used for PHY without quartz + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz clock-names: minItems: 3 @@ -89,7 +89,7 @@ required: - st,syscon examples: - - | + - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/reset/stm32mp1-resets.h> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 3ea0e1290dbb..dadeb8f811c0 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -35,7 +35,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW module IO range + The physical base address and size of full the CPSW module IO range '#address-cells': const: 1 @@ -85,36 +85,36 @@ properties: patternProperties: "^port@[0-9]+$": - type: object - description: CPSW external ports - - allOf: - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - enum: [1, 2] - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 1 - maximum: 1024 - description: - Specifies default PORT VID to be used to segregate - ports. Default value - CPSW port number. - - required: - - reg - - phys + type: object + description: CPSW external ports + + allOf: + - $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - enum: [1, 2] + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,dual-emac-pvid: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 1024 + description: + Specifies default PORT VID to be used to segregate + ports. Default value - CPSW port number. + + required: + - reg + - phys cpts: type: object diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 174579370a22..227270cbf892 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -55,7 +55,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW2G NUSS IO range + The physical base address and size of full the CPSW2G NUSS IO range reg-names: items: @@ -100,38 +100,38 @@ properties: patternProperties: port@1: - type: object - description: CPSW2G NUSS external ports - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - const: 1 - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag - description: - Specifies the port works in mac-only mode. - - ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array - description: - Phandle to the system control device node which provides access - to efuse IO range with MAC addresses - - required: - - reg - - phys + type: object + description: CPSW2G NUSS external ports + + $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - const: 1 + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys additionalProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index fe9c7df78ea1..1c9d7f05f173 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -21,18 +21,18 @@ properties: compatible: items: - enum: - - fsl,imx6q-ocotp - - fsl,imx6sl-ocotp - - fsl,imx6sx-ocotp - - fsl,imx6ul-ocotp - - fsl,imx6ull-ocotp - - fsl,imx7d-ocotp - - fsl,imx6sll-ocotp - - fsl,imx7ulp-ocotp - - fsl,imx8mq-ocotp - - fsl,imx8mm-ocotp - - fsl,imx8mn-ocotp - - fsl,imx8mp-ocotp + - fsl,imx6q-ocotp + - fsl,imx6sl-ocotp + - fsl,imx6sx-ocotp + - fsl,imx6ul-ocotp + - fsl,imx6ull-ocotp + - fsl,imx7d-ocotp + - fsl,imx6sll-ocotp + - fsl,imx7ulp-ocotp + - fsl,imx8mq-ocotp + - fsl,imx8mm-ocotp + - fsl,imx8mn-ocotp + - fsl,imx8mp-ocotp - const: syscon reg: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index d10a0cf91ba7..59aca6d22ff9 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -46,8 +46,8 @@ properties: const: 1 required: - - compatible - - reg + - compatible + - reg examples: - | diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 9e32cb43fb21..0d2557bb0bcc 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -37,9 +37,9 @@ properties: const: 0 phy-supply: - description: - Phandle to a regulator that provides power to the PHY. This - regulator will be managed during the PHY power on/off sequence. + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. required: - compatible diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml index cb71561a21b4..fb29ad807b68 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -100,9 +100,9 @@ properties: - const: linestate - const: otg-mux - items: - - const: otg-bvalid - - const: otg-id - - const: linestate + - const: otg-bvalid + - const: otg-id + - const: linestate phy-supply: description: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index e4cd4a1deae9..185cdea9cf81 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -37,7 +37,7 @@ properties: - description: Address and length of PHY's common serdes block. "#clock-cells": - enum: [ 1, 2 ] + enum: [ 1, 2 ] "#address-cells": enum: [ 1, 2 ] @@ -65,16 +65,15 @@ properties: vdda-phy-supply: description: - Phandle to a regulator supply to PHY core block. + Phandle to a regulator supply to PHY core block. vdda-pll-supply: description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + Phandle to 1.8V regulator supply to PHY refclk pll block. vddp-ref-clk-supply: description: - Phandle to a regulator supply to any specific refclk - pll block. + Phandle to a regulator supply to any specific refclk pll block. #Required nodes: patternProperties: @@ -184,8 +183,8 @@ allOf: - description: phy common block reset. reset-names: items: - - const: phy - - const: common + - const: phy + - const: common - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 6e2487501457..ef8ae9f73092 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -26,7 +26,7 @@ properties: - const: dp_com "#clock-cells": - enum: [ 1, 2 ] + enum: [ 1, 2 ] "#address-cells": enum: [ 1, 2 ] @@ -62,16 +62,15 @@ properties: vdda-phy-supply: description: - Phandle to a regulator supply to PHY core block. + Phandle to a regulator supply to PHY core block. vdda-pll-supply: description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + Phandle to 1.8V regulator supply to PHY refclk pll block. vddp-ref-clk-supply: description: - Phandle to a regulator supply to any specific refclk - pll block. + Phandle to a regulator supply to any specific refclk pll block. #Required nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 9ba62dcb1e5d..ccda92859eca 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -17,15 +17,15 @@ properties: compatible: oneOf: - items: - - enum: - - qcom,ipq8074-qusb2-phy - - qcom,msm8996-qusb2-phy - - qcom,msm8998-qusb2-phy + - enum: + - qcom,ipq8074-qusb2-phy + - qcom,msm8996-qusb2-phy + - qcom,msm8998-qusb2-phy - items: - - enum: - - qcom,sc7180-qusb2-phy - - qcom,sdm845-qusb2-phy - - const: qcom,qusb2-v2-phy + - enum: + - qcom,sc7180-qusb2-phy + - qcom,sdm845-qusb2-phy + - const: qcom,qusb2-v2-phy reg: maxItems: 1 @@ -49,12 +49,12 @@ properties: - const: iface vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. vdda-phy-dpdm-supply: - description: - Phandle to 3.1V regulator supply to Dp/Dm port signals. + description: + Phandle to 3.1V regulator supply to Dp/Dm port signals. resets: maxItems: 1 @@ -64,12 +64,12 @@ properties: nvmem-cells: maxItems: 1 description: - Phandle to nvmem cell that contains 'HS Tx trim' - tuning parameter value for qusb2 phy. + Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. qcom,tcsr-syscon: description: - Phandle to TCSR syscon register region. + Phandle to TCSR syscon register region. $ref: /schemas/types.yaml#/definitions/phandle if: diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml index 86f49093b65f..a06831fd64b9 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -33,8 +33,8 @@ properties: clock-names: oneOf: - items: # for Pro5 - - const: gio - - const: link + - const: gio + - const: link - const: link # for others resets: @@ -44,8 +44,8 @@ properties: reset-names: oneOf: - items: # for Pro5 - - const: gio - - const: link + - const: gio + - const: link - const: link # for others socionext,syscon: diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml index c871d462c952..6fa5caab1487 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -37,12 +37,12 @@ properties: oneOf: - const: link # for PXs2 - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext + - const: link + - const: phy + - const: phy-ext - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml index edff2c95c9ae..9d46715ed036 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -37,15 +37,15 @@ properties: clock-names: oneOf: - items: # for Pro4, Pro5 - - const: gio - - const: link + - const: gio + - const: link - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext + - const: link + - const: phy + - const: phy-ext - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 @@ -53,11 +53,11 @@ properties: reset-names: oneOf: - items: # for Pro4,Pro5 - - const: gio - - const: link + - const: gio + - const: link - items: # for others - - const: link - - const: phy + - const: link + - const: phy vbus-supply: description: A phandle to the regulator for USB VBUS diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 3f913d6d1c3d..5ffc95c62909 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -203,7 +203,8 @@ examples: }; refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; assigned-clock-parents = <&k3_clks 292 11>; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 017d9593573b..54631dc1adb0 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -34,22 +34,22 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index c643d6d44415..a90c0fe0495f 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -43,24 +43,24 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 1506726c7fea..c78ab7e2eee7 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -31,57 +31,57 @@ patternProperties: properties: function: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, - SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] groups: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, - SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 18163fb69ce7..44c04d11ae4c 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -32,20 +32,20 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-pinctrl - - ingenic,jz4725b-pinctrl - - ingenic,jz4760-pinctrl - - ingenic,jz4770-pinctrl - - ingenic,jz4780-pinctrl - - ingenic,x1000-pinctrl - - ingenic,x1500-pinctrl - - ingenic,x1830-pinctrl + - ingenic,jz4740-pinctrl + - ingenic,jz4725b-pinctrl + - ingenic,jz4760-pinctrl + - ingenic,jz4770-pinctrl + - ingenic,jz4780-pinctrl + - ingenic,x1000-pinctrl + - ingenic,x1500-pinctrl + - ingenic,x1830-pinctrl - items: - - const: ingenic,jz4760b-pinctrl - - const: ingenic,jz4760-pinctrl + - const: ingenic,jz4760b-pinctrl + - const: ingenic,jz4760-pinctrl - items: - - const: ingenic,x1000e-pinctrl - - const: ingenic,x1000-pinctrl + - const: ingenic,x1000e-pinctrl + - const: ingenic,x1000-pinctrl reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index b2de3992d484..c64c93206817 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -60,8 +60,8 @@ patternProperties: oneOf: - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, - qdsd_data3 ] + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] minItems: 1 maxItems: 4 @@ -70,31 +70,31 @@ patternProperties: Specify the alternative function to be configured for the specified pins. enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, - atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, - blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, - blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, - blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, - cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, - dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, - flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, - gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, - ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, - nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, - pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, - pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, - pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, - qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, - qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 6dc3b52f47cd..8508c57522fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: pins. enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 0857cbeeb43c..72877544ca78 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -48,8 +48,8 @@ properties: st,package: description: - Indicates the SOC package used. - More details in include/dt-bindings/pinctrl/stm32-pinfunc.h + Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index ff5936e4a215..dd564349aa53 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -58,13 +58,13 @@ properties: power-domains: description: - A phandle and PM domain specifier as defined by bindings of the power - controller specified by phandle. Some power domains might be powered - from another power domain (or have other hardware specific - dependencies). For representing such dependency a standard PM domain - consumer binding is used. When provided, all domains created - by the given provider should be subdomains of the domain specified - by this binding. + A phandle and PM domain specifier as defined by bindings of the power + controller specified by phandle. Some power domains might be powered + from another power domain (or have other hardware specific + dependencies). For representing such dependency a standard PM domain + consumer binding is used. When provided, all domains created + by the given provider should be subdomains of the domain specified + by this binding. required: - "#power-domain-cells" diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml index 30eabbb14ef3..6244b8ee9402 100644 --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml @@ -44,9 +44,9 @@ required: anyOf: - required: - - gpios + - gpios - required: - - charge-status-gpios + - charge-status-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index d2022206081f..c0d7700afee7 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -76,8 +76,7 @@ patternProperties: "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": description: List of regulators and its properties - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index 085cbd1ad8d0..fb111e2d5b99 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -29,7 +29,7 @@ properties: Short-circuit interrupt for lab. required: - - interrupts + - interrupts ibb: type: object @@ -42,7 +42,7 @@ properties: Short-circuit interrupt for lab. required: - - interrupts + - interrupts required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 24b0c50fa436..6070456a7b67 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -118,16 +118,16 @@ else: - const: l1dram required: - - compatible - - reg - - reg-names - - ti,sci - - ti,sci-dev-id - - ti,sci-proc-ids - - resets - - firmware-name - - mboxes - - memory-region + - compatible + - reg + - reg-names + - ti,sci + - ti,sci-dev-id + - ti,sci-proc-ids + - resets + - firmware-name + - mboxes + - memory-region unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml index b1a71c1bb05b..569cd3bd3a70 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -24,9 +24,9 @@ properties: compatible: items: - enum: - - fsl,imx7d-src - - fsl,imx8mq-src - - fsl,imx8mp-src + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src - const: syscon reg: diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml index 4206bf8a2469..bc2c7e53a28e 100644 --- a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml @@ -16,16 +16,16 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-rtc - - ingenic,jz4760-rtc + - ingenic,jz4740-rtc + - ingenic,jz4760-rtc - items: - - const: ingenic,jz4725b-rtc - - const: ingenic,jz4740-rtc + - const: ingenic,jz4725b-rtc + - const: ingenic,jz4740-rtc - items: - - enum: - - ingenic,jz4770-rtc - - ingenic,jz4780-rtc - - const: ingenic,jz4760-rtc + - enum: + - ingenic,jz4770-rtc + - ingenic,jz4780-rtc + - const: ingenic,jz4760-rtc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index c023d650e9c1..dc8349322c83 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -16,18 +16,18 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-uart - - ingenic,jz4760-uart - - ingenic,jz4780-uart - - ingenic,x1000-uart + - ingenic,jz4740-uart + - ingenic,jz4760-uart + - ingenic,jz4780-uart + - ingenic,x1000-uart - items: - - enum: - - ingenic,jz4770-uart - - ingenic,jz4775-uart - - const: ingenic,jz4760-uart + - enum: + - ingenic,jz4770-uart + - ingenic,jz4775-uart + - const: ingenic,jz4760-uart - items: - - const: ingenic,jz4725b-uart - - const: ingenic,jz4740-uart + - const: ingenic,jz4725b-uart + - const: ingenic,jz4740-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 3cd0b70cd6cf..55fffae05dcf 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -97,13 +97,13 @@ allOf: clock-names: oneOf: - items: - - const: t0_clk - - const: slow_clk + - const: t0_clk + - const: slow_clk - items: - - const: t0_clk - - const: t1_clk - - const: t2_clk - - const: slow_clk + - const: t0_clk + - const: t1_clk + - const: t2_clk + - const: slow_clk required: - compatible diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index a2b29cc3e93b..bd04fdb57414 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Mukesh Savaliya <msavaliy@codeaurora.org> + - Akash Asthana <akashast@codeaurora.org> description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -38,10 +38,10 @@ properties: - description: Slave AHB Clock "#address-cells": - const: 2 + const: 2 "#size-cells": - const: 2 + const: 2 ranges: true @@ -79,15 +79,15 @@ patternProperties: maxItems: 1 interconnects: - minItems: 2 - maxItems: 3 + minItems: 2 + maxItems: 3 interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory + minItems: 2 + items: + - const: qup-core + - const: qup-config + - const: qup-memory required: - reg @@ -111,10 +111,10 @@ patternProperties: maxItems: 1 "#address-cells": - const: 1 + const: 1 "#size-cells": - const: 0 + const: 0 required: - compatible @@ -136,10 +136,10 @@ patternProperties: maxItems: 1 "#address-cells": - const: 1 + const: 1 "#size-cells": - const: 0 + const: 0 clock-frequency: description: Desired I2C bus clock frequency in Hz. diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index f9344adaf6c2..7a7f28469624 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -19,12 +19,11 @@ properties: compatible: items: - enum: - - amlogic,aiu-gxbb - - amlogic,aiu-gxl - - amlogic,aiu-meson8 - - amlogic,aiu-meson8b - - const: - amlogic,aiu + - amlogic,aiu-gxbb + - amlogic,aiu-gxl + - amlogic,aiu-meson8 + - amlogic,aiu-meson8b + - const: amlogic,aiu clocks: items: diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index 51a0c30e10f9..b4b3828c40af 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -19,13 +19,11 @@ properties: compatible: oneOf: - items: - - const: - amlogic,g12a-toacodec + - const: amlogic,g12a-toacodec - items: - - enum: - - amlogic,sm1-toacodec - - const: - amlogic,g12a-toacodec + - enum: + - amlogic,sm1-toacodec + - const: amlogic,g12a-toacodec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 83f44f07ac3f..5bcb643c288f 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -11,7 +11,7 @@ maintainers: properties: compatible: - const: cirrus,cs42l51 + const: cirrus,cs42l51 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml index 44f49bebb267..cdc0fdaab30a 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -16,13 +16,13 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-i2s - - ingenic,jz4760-i2s - - ingenic,jz4770-i2s - - ingenic,jz4780-i2s + - ingenic,jz4740-i2s + - ingenic,jz4760-i2s + - ingenic,jz4770-i2s + - ingenic,jz4780-i2s - items: - - const: ingenic,jz4725b-i2s - - const: ingenic,jz4740-i2s + - const: ingenic,jz4725b-i2s + - const: ingenic,jz4740-i2s '#sound-dai-cells': const: 0 diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml index e5ac35280da3..9c2e3effa0c0 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml @@ -11,7 +11,7 @@ maintainers: properties: compatible: - const: maxim,max98390 + const: maxim,max98390 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index acb2b888dbfc..245895b58a2f 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -19,16 +19,16 @@ properties: - const: rockchip,rk3066-i2s - items: - enum: - - rockchip,px30-i2s - - rockchip,rk3036-i2s - - rockchip,rk3188-i2s - - rockchip,rk3228-i2s - - rockchip,rk3288-i2s - - rockchip,rk3308-i2s - - rockchip,rk3328-i2s - - rockchip,rk3366-i2s - - rockchip,rk3368-i2s - - rockchip,rk3399-i2s + - rockchip,px30-i2s + - rockchip,rk3036-i2s + - rockchip,rk3188-i2s + - rockchip,rk3228-i2s + - rockchip,rk3288-i2s + - rockchip,rk3308-i2s + - rockchip,rk3328-i2s + - rockchip,rk3366-i2s + - rockchip,rk3368-i2s + - rockchip,rk3399-i2s - const: rockchip,rk3066-i2s reg: @@ -55,8 +55,8 @@ properties: oneOf: - const: rx - items: - - const: tx - - const: rx + - const: tx + - const: rx power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml index c467152656f7..7bad6f16fe60 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -25,8 +25,8 @@ properties: - const: rockchip,rk3399-spdif - items: - enum: - - rockchip,rk3188-spdif - - rockchip,rk3288-spdif + - rockchip,rk3188-spdif + - rockchip,rk3288-spdif - const: rockchip,rk3066-spdif reg: diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 8192450d72dc..33a90f829c80 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -44,8 +44,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Sets TDM RX capture edge. enum: - - 0 # Rising edge - - 1 # Falling edge + - 0 # Rising edge + - 1 # Falling edge '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index e84d4a20c633..f578f17f3e04 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -32,32 +32,32 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: description: | - GPIO used for hardware reset. + GPIO used for hardware reset. areg-supply: - description: | - Regulator with AVDD at 3.3V. If not defined then the internal regulator - is enabled. + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. ti,mic-bias-source: description: | - Indicates the source for MIC Bias. - 0 - Mic bias is set to VREF - 1 - Mic bias is set to VREF × 1.096 - 6 - Mic bias is set to AVDD + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 6] ti,vref-source: description: | - Indicates the source for MIC Bias. - 0 - Set VREF to 2.75V - 1 - Set VREF to 2.5V - 2 - Set VREF to 1.375V + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] @@ -109,7 +109,7 @@ properties: default: [0, 0, 0, 0] patternProperties: - '^ti,gpo-config-[1-4]$': + '^ti,gpo-config-[1-4]$': $ref: /schemas/types.yaml#/definitions/uint32-array description: | Defines the configuration and output driver for the general purpose diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 243a6b1e66ea..7866a655d81c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -22,10 +22,10 @@ properties: - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: - - enum: - - allwinner,sun8i-r40-spi - - allwinner,sun50i-h6-spi - - const: allwinner,sun8i-h3-spi + - enum: + - allwinner,sun8i-r40-spi + - allwinner,sun50i-h6-spi + - const: allwinner,sun8i-h3-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 6e44c9c2aeba..1b50cedbfb3e 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,19 +23,19 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: - - enum: - - fsl,imx50-ecspi - - fsl,imx6q-ecspi - - fsl,imx6sx-ecspi - - fsl,imx6sl-ecspi - - fsl,imx6sll-ecspi - - fsl,imx6ul-ecspi - - fsl,imx7d-ecspi - - fsl,imx8mq-ecspi - - fsl,imx8mm-ecspi - - fsl,imx8mn-ecspi - - fsl,imx8mp-ecspi - - const: fsl,imx51-ecspi + - enum: + - fsl,imx50-ecspi + - fsl,imx6q-ecspi + - fsl,imx6sx-ecspi + - fsl,imx6sl-ecspi + - fsl,imx6sll-ecspi + - fsl,imx6ul-ecspi + - fsl,imx7d-ecspi + - fsl,imx8mq-ecspi + - fsl,imx8mm-ecspi + - fsl,imx8mn-ecspi + - fsl,imx8mp-ecspi + - const: fsl,imx51-ecspi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml index 4ddb42a4ae05..e0c55dd235d8 100644 --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml @@ -33,4 +33,4 @@ examples: reg = <0x1f000000 0x10>; }; -...
\ No newline at end of file +... diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index 0ae692dc28b5..3d3fed63409b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -43,47 +43,47 @@ properties: maxItems: 1 required: - - compatible - - reg - - spi-max-frequency - - mux-controls + - compatible + - reg + - spi-max-frequency + - mux-controls examples: - - | - #include <dt-bindings/gpio/gpio.h> - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; - mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; - }; + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; - spi { - #address-cells = <1>; - #size-cells = <0>; - spi@0 { - compatible = "spi-mux"; - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <100000000>; + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; - mux-controls = <&mux>; + mux-controls = <&mux>; - spi-flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <40000000>; - }; + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; - spi-device@1 { - compatible = "lineartechnology,ltc2488"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <10000000>; - }; - }; - }; + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 81ad4b761502..74dc6185eced 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -26,13 +26,13 @@ properties: - const: rockchip,rv1108-spi - items: - enum: - - rockchip,px30-spi - - rockchip,rk3188-spi - - rockchip,rk3288-spi - - rockchip,rk3308-spi - - rockchip,rk3328-spi - - rockchip,rk3368-spi - - rockchip,rk3399-spi + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi - const: rockchip,rk3066-spi reg: diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index 5145883d932e..ad4beaf02842 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -44,9 +44,9 @@ select: true properties: "#cooling-cells": description: - Must be 2, in order to specify minimum and maximum cooling state used in - the cooling-maps reference. The first cell is the minimum cooling state - and the second cell is the maximum cooling state requested. + Must be 2, in order to specify minimum and maximum cooling state used in + the cooling-maps reference. The first cell is the minimum cooling state + and the second cell is the maximum cooling state requested. const: 2 examples: diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index 7a922f540934..a832d427e9d5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -18,29 +18,28 @@ description: | This binding describes the thermal idle node. properties: - $nodename: - const: thermal-idle - description: | - A thermal-idle node describes the idle cooling device properties to - cool down efficiently the attached thermal zone. - - '#cooling-cells': - const: 2 - description: | - Must be 2, in order to specify minimum and maximum cooling state used in - the cooling-maps reference. The first cell is the minimum cooling state - and the second cell is the maximum cooling state requested. - - duration-us: - description: | - The idle duration in microsecond the device should cool down. - - exit-latency-us: - description: | - The exit latency constraint in microsecond for the injected - idle state for the device. It is the latency constraint to - apply when selecting an idle state from among all the present - ones. + $nodename: + const: thermal-idle + description: | + A thermal-idle node describes the idle cooling device properties to + cool down efficiently the attached thermal zone. + + '#cooling-cells': + const: 2 + description: | + Must be 2, in order to specify minimum and maximum cooling state used in + the cooling-maps reference. The first cell is the minimum cooling state + and the second cell is the maximum cooling state requested. + + duration-us: + description: | + The idle duration in microsecond the device should cool down. + + exit-latency-us: + description: | + The exit latency constraint in microsecond for the injected idle state + for the device. It is the latency constraint to apply when selecting an + idle state from among all the present ones. required: - '#cooling-cells' diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index 883f7f46650b..a4f51f46b7a1 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -20,17 +20,17 @@ properties: - const: fsl,imx31-gpt - items: - enum: - - fsl,imx25-gpt - - fsl,imx50-gpt - - fsl,imx51-gpt - - fsl,imx53-gpt - - fsl,imx6q-gpt + - fsl,imx25-gpt + - fsl,imx50-gpt + - fsl,imx51-gpt + - fsl,imx53-gpt + - fsl,imx6q-gpt - const: fsl,imx31-gpt - const: fsl,imx6dl-gpt - items: - enum: - - fsl,imx6sl-gpt - - fsl,imx6sx-gpt + - fsl,imx6sl-gpt + - fsl,imx6sx-gpt - const: fsl,imx6dl-gpt reg: diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml index 371fb02a4351..024bcad75101 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -49,16 +49,16 @@ properties: compatible: oneOf: - items: - - enum: - - ingenic,jz4740-tcu - - ingenic,jz4725b-tcu - - ingenic,jz4770-tcu - - ingenic,x1000-tcu - - const: simple-mfd + - enum: + - ingenic,jz4740-tcu + - ingenic,jz4725b-tcu + - ingenic,jz4770-tcu + - ingenic,x1000-tcu + - const: simple-mfd - items: - - const: ingenic,jz4780-tcu - - const: ingenic,jz4770-tcu - - const: simple-mfd + - const: ingenic,jz4780-tcu + - const: ingenic,jz4770-tcu + - const: simple-mfd reg: maxItems: 1 @@ -113,13 +113,13 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4740-watchdog - - ingenic,jz4780-watchdog + - ingenic,jz4740-watchdog + - ingenic,jz4780-watchdog - items: - - enum: - - ingenic,jz4770-watchdog - - ingenic,jz4725b-watchdog - - const: ingenic,jz4740-watchdog + - enum: + - ingenic,jz4770-watchdog + - ingenic,jz4725b-watchdog + - const: ingenic,jz4740-watchdog reg: maxItems: 1 @@ -143,13 +143,13 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4740-pwm - - ingenic,jz4725b-pwm + - ingenic,jz4740-pwm + - ingenic,jz4725b-pwm - items: - - enum: - - ingenic,jz4770-pwm - - ingenic,jz4780-pwm - - const: ingenic,jz4740-pwm + - enum: + - ingenic,jz4770-pwm + - ingenic,jz4780-pwm + - const: ingenic,jz4740-pwm reg: maxItems: 1 @@ -182,11 +182,11 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4725b-ost - - ingenic,jz4770-ost + - ingenic,jz4725b-ost + - ingenic,jz4770-ost - items: - - const: ingenic,jz4780-ost - - const: ingenic,jz4770-ost + - const: ingenic,jz4780-ost + - const: ingenic,jz4770-ost reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml index 5d300efdf0ca..7b39e3204fb3 100644 --- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml +++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml @@ -27,8 +27,8 @@ properties: clocks: minItems: 1 items: - - description: Timer ticks reference clock source - - description: APB interface clock source + - description: Timer ticks reference clock source + - description: APB interface clock source clock-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index b7e94fe8643f..4ace8039840a 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -298,7 +298,7 @@ properties: - national,lm80 # Temperature sensor with integrated fan control - national,lm85 - # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface + # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator - national,lm92 # i2c trusted platform module (TPM) - nuvoton,npct501 diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 4ff632d82858..ffa157a0fce7 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -19,24 +19,24 @@ properties: - const: snps,dwc2 - items: - enum: - - rockchip,px30-usb - - rockchip,rk3036-usb - - rockchip,rk3188-usb - - rockchip,rk3228-usb - - rockchip,rk3288-usb - - rockchip,rk3328-usb - - rockchip,rk3368-usb - - rockchip,rv1108-usb + - rockchip,px30-usb + - rockchip,rk3036-usb + - rockchip,rk3188-usb + - rockchip,rk3228-usb + - rockchip,rk3288-usb + - rockchip,rk3328-usb + - rockchip,rk3368-usb + - rockchip,rv1108-usb - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb - const: lantiq,xrx200-usb - items: - enum: - - amlogic,meson8-usb - - amlogic,meson8b-usb - - amlogic,meson-gxbb-usb - - amlogic,meson-g12a-usb + - amlogic,meson8-usb + - amlogic,meson8b-usb + - amlogic,meson-gxbb-usb + - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg - const: snps,dwc2 @@ -116,12 +116,13 @@ properties: snps,need-phy-for-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that the phy needs to be left on for remote wakeup during suspend. + description: If present indicates that the phy needs to be left on for + remote wakeup during suspend. snps,reset-phy-on-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that we need to reset the PHY when we detect a wakeup. - This is due to a hardware errata. + description: If present indicates that we need to reset the PHY when we + detect a wakeup. This is due to a hardware errata. required: - compatible diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 69f3f26d1207..247ef00381ea 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -80,7 +80,7 @@ properties: companion: $ref: /schemas/types.yaml#/definitions/phandle description: - Phandle of a companion. + Phandle of a companion. phys: description: PHY specifier for the USB PHY diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index c334aea6b59d..678396eeeb78 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -16,11 +16,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4770-musb - - ingenic,jz4740-musb + - ingenic,jz4770-musb + - ingenic,jz4740-musb - items: - - const: ingenic,jz4725b-musb - - const: ingenic,jz4740-musb + - const: ingenic,jz4725b-musb + - const: ingenic,jz4740-musb reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index 0073763a30d8..196589c93373 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -57,11 +57,11 @@ properties: minItems: 4 maxItems: 5 items: - - const: dev - - const: ss - - const: ss_src - - const: fs_src - - const: hs_src + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src power-domains: items: diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 90750255792f..484fc1091d7c 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -19,9 +19,9 @@ properties: power-domains: description: - PM domain provider node and an args specifier containing - the USB device id value. See, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + PM domain provider node and an args specifier containing + the USB device id value. See, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt clocks: description: Clock phandles to usb2_refclk and lpm_clk diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index 804b9b4f6654..c1b19fc5d0a2 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - ti,keystone-dwc3 - - ti,am654-dwc3 + - ti,keystone-dwc3 + - ti,am654-dwc3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f3d847832fdc..2baee2c817c1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -993,7 +993,8 @@ patternProperties: "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. + (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics "^starry,.*": |