diff options
Diffstat (limited to 'Documentation')
909 files changed, 15253 insertions, 6165 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index d9d117d457e1..9b642669cb16 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -12,7 +12,6 @@ Description: This file shows ASIC health status. The possible values are: What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ cpld1_version cpld2_version - Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -21,6 +20,28 @@ Description: These files show with which CPLD versions have been burned The files are read only. +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + cpld3_version + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + jtag_enable + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files enable and disable the access to the JTAG domain. + By default access to the JTAG domain is disabled. + + The file is read/write. + What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio Date: June 2018 KernelVersion: 4.19 @@ -76,3 +97,21 @@ Description: These files show the system reset cause, as following: power reset cause. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ + reset_comex_pwr_fail + reset_from_comex + reset_system + reset_voltmon_upgrade_fail + +Date: November 2018 +KernelVersion: 4.21 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: ComEx + power fail, reset from ComEx, system platform reset, reset + due to voltage monitor devices upgrade failure, + Value 1 in file means this is reset cause, 0 - otherwise. + Only one bit could be 1 at the same time, representing only + the last reset cause. + + The files are read only. diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index dea212db9df3..7710d4022b19 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -244,7 +244,7 @@ Description: What: /sys/block/<disk>/queue/zoned Date: September 2016 -Contact: Damien Le Moal <damien.lemoal@hgst.com> +Contact: Damien Le Moal <damien.lemoal@wdc.com> Description: zoned indicates if the device is a zoned block device and the zone model of the device if it is indeed zoned. @@ -259,6 +259,14 @@ Description: zone commands, they will be treated as regular block devices and zoned will report "none". +What: /sys/block/<disk>/queue/nr_zones +Date: November 2018 +Contact: Damien Le Moal <damien.lemoal@wdc.com> +Description: + nr_zones indicates the total number of zones of a zoned block + device ("host-aware" or "host-managed" zone model). For regular + block devices, the value is always 0. + What: /sys/block/<disk>/queue/chunk_sectors Date: September 2016 Contact: Hannes Reinecke <hare@suse.com> @@ -268,6 +276,6 @@ Description: indicates the size in 512B sectors of the RAID volume stripe segment. For a zoned block device, either host-aware or host-managed, chunk_sectors indicates the - size of 512B sectors of the zones of the device, with + size in 512B sectors of the zones of the device, with the eventual exception of the last zone of the device which may be smaller. diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index c1513c756af1..9d2339a485c8 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -98,3 +98,35 @@ Description: The backing_dev file is read-write and set up backing device for zram to write incompressible pages. For using, user should enable CONFIG_ZRAM_WRITEBACK. + +What: /sys/block/zram<id>/idle +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + idle file is write-only and mark zram slot as idle. + If system has mounted debugfs, user can see which slots + are idle via /sys/kernel/debug/zram/zram<id>/block_state + +What: /sys/block/zram<id>/writeback +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The writeback file is write-only and trigger idle and/or + huge page writeback to backing device. + +What: /sys/block/zram<id>/bd_stat +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The bd_stat file is read-only and represents backing device's + statistics (bd_count, bd_reads, bd_writes) in a format + similar to block layer statistics file format. + +What: /sys/block/zram<id>/writeback_limit +Date: November 2018 +Contact: Minchan Kim <minchan@kernel.org> +Description: + The writeback_limit file is read-write and specifies the maximum + amount of writeback ZRAM can do. The limit could be changed + in run time and "0" means disable the limit. + No limit is the initial state. diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c new file mode 100644 index 000000000000..2f332ec36f82 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -0,0 +1,146 @@ +What: /sys/bus/i3c/devices/i3c-<bus-id> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C bus. This directory will contain one sub-directory per + I3C device present on the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/current_master +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the master that owns the bus (<bus-id>-<master-pid>) at + the time this file is read. Note that bus ownership can change + overtime, so there's no guarantee that when the read() call + returns, the value returned is still valid. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/mode +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See + the I3C specification for a detailed description of what each + of these modes implies. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I3C SDR mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + The frequency (expressed in Hz) of the SCL signal when + operating in I2C mode. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to the master controller. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + This entry describes the BCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + This entry describes the DCR of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + This entry describes the PID of the master controller driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + This entry describes the HDRCAP of the master controller + driving the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + An I3C device present on I3C bus identified by <bus-id>. Note + that all devices are represented including the master driving + the bus. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dynamic_address +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Dynamic address assigned to device <bus-id>-<device-pid>. This + address may change if the bus is re-initialized. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + BCR stands for Bus Characteristics Register and express the + device capabilities in term of speed, maximum read/write + length, etc. See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + DCR stands for Device Characteristics Register and express the + device capabilities in term of exposed features. See the I3C + specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + PID stands for Provisional ID and is used to uniquely identify + a device on a bus. This PID contains information about the + vendor, the part and an instance ID so that several devices of + the same type can be connected on the same bus. + See the I3C specification for more details. + +What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + Expose the HDR (High Data Rate) capabilities of a device. + Returns a list of supported HDR mode, each element is separated + by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl". + See the I3C specification for more details about these HDR + modes. + +What: /sys/bus/i3c/devices/<bus-id>-<device-pid> +KernelVersion: 5.0 +Contact: linux-i3c@vger.kernel.org +Description: + These directories are just symbolic links to + /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 151584a1f950..b21fba14689b 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -21,6 +21,15 @@ Description: Holds a comma separated list of device unique_ids that If a device is authorized automatically during boot its boot attribute is set to 1. +What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection +Date: Mar 2019 +KernelVersion: 4.21 +Contact: thunderbolt-software@lists.01.org +Description: This attribute tells whether the system uses IOMMU + for DMA protection. Value of 1 means IOMMU is used 0 means + it is not (DMA protection is solely based on Thunderbolt + security levels). + What: /sys/bus/thunderbolt/devices/.../domainX/security Date: Sep 2017 KernelVersion: 4.13 diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa index f240221e071e..985d84c585c6 100644 --- a/Documentation/ABI/testing/sysfs-class-net-dsa +++ b/Documentation/ABI/testing/sysfs-class-net-dsa @@ -1,4 +1,4 @@ -What: /sys/class/net/<iface>/tagging +What: /sys/class/net/<iface>/dsa/tagging Date: August 2018 KernelVersion: 4.20 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-devices-software_node b/Documentation/ABI/testing/sysfs-devices-software_node new file mode 100644 index 000000000000..85df37de359f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-software_node @@ -0,0 +1,10 @@ +What: /sys/devices/.../software_node/ +Date: January 2019 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory contains the details about the device that are + assigned in kernel (i.e. software), as opposed to the + firmware_node directory which contains the details that are + assigned for the device in firmware. The main attributes in the + directory will show the properties the device has, and the + relationship it has to some of the other devices. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 73318225a368..9605dbd4b5b5 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -145,6 +145,8 @@ What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/name /sys/devices/system/cpu/cpuX/cpuidle/stateN/power /sys/devices/system/cpu/cpuX/cpuidle/stateN/time /sys/devices/system/cpu/cpuX/cpuidle/stateN/usage + /sys/devices/system/cpu/cpuX/cpuidle/stateN/above + /sys/devices/system/cpu/cpuX/cpuidle/stateN/below Date: September 2007 KernelVersion: v2.6.24 Contact: Linux power management list <linux-pm@vger.kernel.org> @@ -166,6 +168,11 @@ Description: usage: (RO) Number of times this state was entered (a count). + above: (RO) Number of times this state was entered, but the + observed CPU idle duration was too short for it (a count). + + below: (RO) Number of times this state was entered, but the + observed CPU idle duration was too long for it (a count). What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc Date: February 2008 diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index ac66ae2509a9..e133ccd60228 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -60,15 +60,6 @@ the returned memory, like GFP_DMA). :: - void * - dma_zalloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) - -Wraps dma_alloc_coherent() and also zeroes the returned memory if the -allocation attempt succeeded. - -:: - void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t dma_handle) @@ -717,12 +708,15 @@ dma-api/num_errors The number in this file shows how many dma-api/min_free_entries This read-only file can be read to get the minimum number of free dma_debug_entries the allocator has ever seen. If this value goes - down to zero the code will disable itself - because it is not longer reliable. + down to zero the code will attempt to increase + nr_total_entries to compensate. dma-api/num_free_entries The current number of free dma_debug_entries in the allocator. +dma-api/nr_total_entries The total number of dma_debug_entries in the + allocator, both free and used. + dma-api/driver-filter You can write a name of a driver into this file to limit the debug output to requests from that particular driver. Write an empty string to @@ -742,10 +736,15 @@ driver filter at boot time. The debug code will only print errors for that driver afterwards. This filter can be disabled or changed later using debugfs. When the code disables itself at runtime this is most likely because it ran -out of dma_debug_entries. These entries are preallocated at boot. The number -of preallocated entries is defined per architecture. If it is too low for you -boot with 'dma_debug_entries=<your_desired_number>' to overwrite the -architectural default. +out of dma_debug_entries and was unable to allocate more on-demand. 65536 +entries are preallocated at boot - if this is too low for you boot with +'dma_debug_entries=<your_desired_number>' to overwrite the default. Note +that the code allocates entries in batches, so the exact number of +preallocated entries may be greater than the actual number requested. The +code will print to the kernel log each time it has dynamically allocated +as many entries as were initially preallocated. This is to indicate that a +larger preallocation size may be appropriate, or if it happens continually +that a driver may be leaking mappings. :: diff --git a/Documentation/Makefile b/Documentation/Makefile index 2ca77ad0f238..9786957c6a35 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -2,7 +2,7 @@ # Makefile for Sphinx documentation # -subdir-y := +subdir-y := devicetree/bindings/ # You can set these variables from the command line. SPHINXBUILD = sphinx-build diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg deleted file mode 100644 index 9bbb1944f962..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBH.svg +++ /dev/null @@ -1,499 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:26:09 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="5.7in" - height="6.6in" - viewBox="-44 -44 6838 7888" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreeClassicRCUBH.fig"> - <metadata - id="metadata110"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs108"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3868" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - <marker - inkscape:stockid="Arrow2Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow2Mend" - style="overflow:visible;"> - <path - id="path3886" - style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" - d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " - transform="scale(0.6) rotate(180) translate(0,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="878" - inkscape:window-height="1148" - id="namedview106" - showgrid="false" - inkscape:zoom="1.3547758" - inkscape:cx="256.5" - inkscape:cy="297" - inkscape:window-x="45" - inkscape:window-y="24" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> - <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> - <!-- Line: box --> - <rect - x="0" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> - <!-- Line: box --> - <rect - x="300" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> - <!-- Circle --> - <circle - cx="2850" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle16" /> - <!-- Circle --> - <circle - cx="3150" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle18" /> - <!-- Circle --> - <circle - cx="3450" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle20" /> - <!-- Circle --> - <circle - cx="1350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle22" /> - <!-- Circle --> - <circle - cx="1650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle24" /> - <!-- Circle --> - <circle - cx="1950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle26" /> - <!-- Circle --> - <circle - cx="4350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle28" /> - <!-- Circle --> - <circle - cx="4650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle30" /> - <!-- Circle --> - <circle - cx="4950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle32" /> - <!-- Line --> - <polyline - points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline34" /> - <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> - <!-- Line --> - <polyline - points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline38" /> - <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> - <!-- Line: box --> - <rect - x="750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect42" /> - <!-- Line --> - <polyline - points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> - <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> - <!-- Line: box --> - <rect - x="1500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect48" /> - <!-- Line: box --> - <rect - x="300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect50" /> - <!-- Line: box --> - <rect - x="3750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect52" /> - <!-- Line: box --> - <rect - x="4500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect54" /> - <!-- Line: box --> - <rect - x="3300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect56" /> - <!-- Line: box --> - <rect - x="2250" - y="1650" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect58" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text60">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text62">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text64">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text66">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text68">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text70">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text72">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text74">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text76">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text78">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text80">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text82">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text84">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text86">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text88">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text90">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text92">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline94" /> - <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> - <!-- Line --> - <polyline - points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline98" /> - <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> - <!-- Line --> - <polyline - points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline102" /> - <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg deleted file mode 100644 index 21ba7823479d..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreeClassicRCUBHdyntick.svg +++ /dev/null @@ -1,695 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:20:02 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="5.7in" - height="8.6in" - viewBox="-44 -44 6838 10288" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreeClassicRCUBHdyntick.fig"> - <metadata - id="metadata166"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs164"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3924" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - <marker - inkscape:stockid="Arrow2Lend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow2Lend" - style="overflow:visible;"> - <path - id="path3936" - style="fill-rule:evenodd;stroke-width:0.62500000;stroke-linejoin:round;" - d="M 8.7185878,4.0337352 L -2.2072895,0.016013256 L 8.7185884,-4.0017078 C 6.9730900,-1.6296469 6.9831476,1.6157441 8.7185878,4.0337352 z " - transform="scale(1.1) rotate(180) translate(1,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="845" - inkscape:window-height="988" - id="namedview162" - showgrid="false" - inkscape:zoom="1.0452196" - inkscape:cx="256.5" - inkscape:cy="387.00003" - inkscape:window-x="356" - inkscape:window-y="61" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> - <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> - <!-- Line --> - <polyline - points="5250,8100 5688,5912 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline12" /> - <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> - <polyline - points="5714 6068 5704 5822 5598 6044 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline14" /> - <!-- Line --> - <polyline - points="4050,9300 4486,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline16" /> - <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> - <polyline - points="4514 7418 4506 7172 4396 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline18" /> - <!-- Line --> - <polyline - points="1040,9300 1476,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline20" /> - <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> - <polyline - points="1504 7418 1496 7172 1386 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline22" /> - <!-- Line --> - <polyline - points="2240,8100 2676,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline24" /> - <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> - <polyline - points="2704 6218 2696 5972 2586 6194 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline26" /> - <!-- Line: box --> - <rect - x="0" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect28" /> - <!-- Line: box --> - <rect - x="300" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect30" /> - <!-- Line --> - <polyline - points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline32" /> - <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> - <!-- Line --> - <polyline - points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.0045575;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline36" /> - <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> - <!-- Line --> - <polyline - points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline40" /> - <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> - <!-- Line --> - <polyline - points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> - <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> - <!-- Line --> - <polyline - points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline48" /> - <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> - <!-- Line --> - <polyline - points="2250,8100 2250,6364 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline52" /> - <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> - <!-- Line --> - <polyline - points="1050,9300 1050,7564 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline56" /> - <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> - <!-- Line --> - <polyline - points="4050,9300 4050,7564 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline60" /> - <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> - <!-- Line --> - <polyline - points="5250,8100 5250,6364 " - style="stroke:#00ff00;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline64" /> - <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> - <!-- Circle --> - <circle - cx="2850" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle68" /> - <!-- Circle --> - <circle - cx="3150" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle70" /> - <!-- Circle --> - <circle - cx="3450" - cy="3900" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle72" /> - <!-- Circle --> - <circle - cx="1350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle74" /> - <!-- Circle --> - <circle - cx="1650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle76" /> - <!-- Circle --> - <circle - cx="1950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle78" /> - <!-- Circle --> - <circle - cx="4350" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle80" /> - <!-- Circle --> - <circle - cx="4650" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle82" /> - <!-- Circle --> - <circle - cx="4950" - cy="5100" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle84" /> - <!-- Line: box --> - <rect - x="750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect86" /> - <!-- Line: box --> - <rect - x="300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect88" /> - <!-- Line: box --> - <rect - x="3750" - y="3450" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect90" /> - <!-- Line: box --> - <rect - x="4500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect92" /> - <!-- Line: box --> - <rect - x="3300" - y="6600" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect94" /> - <!-- Line: box --> - <rect - x="2250" - y="1650" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect96" /> - <!-- Line: box --> - <rect - x="0" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect98" /> - <!-- Line: box --> - <rect - x="1350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect100" /> - <!-- Line: box --> - <rect - x="3000" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect102" /> - <!-- Line: box --> - <rect - x="4350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect104" /> - <!-- Line: box --> - <rect - x="1500" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect106" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text108">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text110">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text112">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text114">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text116">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text118">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text120">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text122">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text124">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text126">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text128">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text130">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text132">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text134">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text136">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text138">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text140">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text142">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text144">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text146">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text148">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text150">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text152">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text154">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text156">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.00455750000000066;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline158" /> - <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg deleted file mode 100644 index 15adcac036c7..000000000000 --- a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntick.svg +++ /dev/null @@ -1,741 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Creator: fig2dev Version 3.2 Patchlevel 5e --> - -<!-- CreationDate: Wed Dec 9 17:32:59 2015 --> - -<!-- Magnification: 2.000 --> - -<svg - xmlns:dc="http://purl.org/dc/elements/1.1/" - xmlns:cc="http://creativecommons.org/ns#" - xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" - xmlns:svg="http://www.w3.org/2000/svg" - xmlns="http://www.w3.org/2000/svg" - xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" - xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="6.1in" - height="8.9in" - viewBox="-44 -44 7288 10738" - id="svg2" - version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="BigTreePreemptRCUBHdyntick.fig"> - <metadata - id="metadata182"> - <rdf:RDF> - <cc:Work - rdf:about=""> - <dc:format>image/svg+xml</dc:format> - <dc:type - rdf:resource="http://purl.org/dc/dcmitype/StillImage" /> - <dc:title></dc:title> - </cc:Work> - </rdf:RDF> - </metadata> - <defs - id="defs180"> - <marker - inkscape:stockid="Arrow1Mend" - orient="auto" - refY="0.0" - refX="0.0" - id="Arrow1Mend" - style="overflow:visible;"> - <path - id="path3940" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> - </marker> - </defs> - <sodipodi:namedview - pagecolor="#ffffff" - bordercolor="#666666" - borderopacity="1" - objecttolerance="10" - gridtolerance="10" - guidetolerance="10" - inkscape:pageopacity="0" - inkscape:pageshadow="2" - inkscape:window-width="874" - inkscape:window-height="1148" - id="namedview178" - showgrid="false" - inkscape:zoom="1.2097379" - inkscape:cx="274.5" - inkscape:cy="400.49997" - inkscape:window-x="946" - inkscape:window-y="24" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> - <g - style="stroke-width:.025in; fill:none" - id="g4"> - <!-- Line: box --> - <rect - x="900" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> - <!-- Line: box --> - <rect - x="1200" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect8" /> - <!-- Line: box --> - <rect - x="5400" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect10" /> - <!-- Line: box --> - <rect - x="450" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> - <!-- Line: box --> - <rect - x="750" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> - <!-- Line: box --> - <rect - x="4950" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect16" /> - <!-- Line --> - <polyline - points="5250,8550 5688,6362 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline18" /> - <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> - <polyline - points="5714 6518 5704 6272 5598 6494 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline20" /> - <!-- Line --> - <polyline - points="4050,9750 4486,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline22" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> - <polyline - points="4514 7868 4506 7622 4396 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline24" /> - <!-- Line --> - <polyline - points="1040,9750 1476,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline26" /> - <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> - <polyline - points="1504 7868 1496 7622 1386 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline28" /> - <!-- Line --> - <polyline - points="2240,8550 2676,6512 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline30" /> - <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> - <polyline - points="2704 6668 2696 6422 2586 6644 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline32" /> - <!-- Line --> - <polyline - points="4050,9750 5682,6360 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline34" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 5736 6246--> - <polyline - points="5672 6518 5722 6276 5562 6466 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline36" /> - <!-- Line --> - <polyline - points="1010,9750 2642,6360 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline38" /> - <!-- Arrowhead on XXXpoint 1010 9750 - 2696 6246--> - <polyline - points="2632 6518 2682 6276 2522 6466 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline40" /> - <!-- Line: box --> - <rect - x="0" - y="900" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect42" /> - <!-- Line: box --> - <rect - x="300" - y="1500" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect44" /> - <!-- Line --> - <polyline - points="1350,3900 2350,3040 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline46" /> - <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> - <!-- Line --> - <polyline - points="4950,3900 3948,3040 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline50" /> - <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> - <!-- Line --> - <polyline - points="4050,7050 4050,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline54" /> - <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> - <!-- Line --> - <polyline - points="1050,7050 1050,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline58" /> - <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> - <!-- Line --> - <polyline - points="2250,5850 2250,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline62" /> - <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> - <!-- Line --> - <polyline - points="2250,8550 2250,6814 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline66" /> - <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> - <!-- Line --> - <polyline - points="1050,9750 1050,8014 " - style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline70" /> - <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> - <!-- Line --> - <polyline - points="4050,9750 4050,8014 " - style="stroke:#00ff00;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline74" /> - <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> - <!-- Line --> - <polyline - points="5250,8550 5250,6814 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline78" /> - <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> - <!-- Circle --> - <circle - cx="2850" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle82" /> - <!-- Circle --> - <circle - cx="3150" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle84" /> - <!-- Circle --> - <circle - cx="3450" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle86" /> - <!-- Circle --> - <circle - cx="1350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle88" /> - <!-- Circle --> - <circle - cx="1650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle90" /> - <!-- Circle --> - <circle - cx="1950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle92" /> - <!-- Circle --> - <circle - cx="4350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle94" /> - <!-- Circle --> - <circle - cx="4650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle96" /> - <!-- Circle --> - <circle - cx="4950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle98" /> - <!-- Line: box --> - <rect - x="750" - y="3900" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect100" /> - <!-- Line: box --> - <rect - x="300" - y="7050" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect102" /> - <!-- Line: box --> - <rect - x="3750" - y="3900" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect104" /> - <!-- Line: box --> - <rect - x="4500" - y="5850" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect106" /> - <!-- Line: box --> - <rect - x="3300" - y="7050" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect108" /> - <!-- Line: box --> - <rect - x="2250" - y="2100" - width="1800" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " - id="rect110" /> - <!-- Line: box --> - <rect - x="0" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect112" /> - <!-- Line: box --> - <rect - x="1350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect114" /> - <!-- Line: box --> - <rect - x="3000" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect116" /> - <!-- Line: box --> - <rect - x="4350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect118" /> - <!-- Line: box --> - <rect - x="1500" - y="5850" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect120" /> - <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text122">rcu_bh</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text124">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="3150" - y="2700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text126">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text128">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1650" - y="4500" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text130">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4500" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text132">rcu_node</text> - <!-- Text --> - <text - xml:space="preserve" - x="4650" - y="4200" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text134">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text136">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2250" - y="6450" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text138">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text140">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="7650" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text142">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text144">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5250" - y="6450" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text146">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text148">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="7650" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text150">rcu_data</text> - <!-- Text --> - <text - xml:space="preserve" - x="450" - y="1800" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="start" - id="text152">struct rcu_state</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text154">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text156">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text158">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text160">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text162">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text164">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text166">struct</text> - <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text168">rcu_dynticks</text> - <!-- Text --> - <text - xml:space="preserve" - x="6900" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text170">rcu_preempt</text> - <!-- Text --> - <text - xml:space="preserve" - x="6000" - y="1200" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text172">rcu_sched</text> - <!-- Line --> - <polyline - points="5250,5850 5250,4864 " - style="stroke:#00d1d1;stroke-width:30.00205472;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline174" /> - <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> - </g> -</svg> diff --git a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg index bbc3801470d0..3a1a4f85dc3a 100644 --- a/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg +++ b/Documentation/RCU/Design/Data-Structures/BigTreePreemptRCUBHdyntickCB.svg @@ -13,12 +13,12 @@ xmlns="http://www.w3.org/2000/svg" xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" - width="7.4in" - height="9.9in" - viewBox="-44 -44 8938 11938" + width="7.4000001in" + height="7.9000001in" + viewBox="-44 -44 8938 9526.283" id="svg2" version="1.1" - inkscape:version="0.48.4 r9939" + inkscape:version="0.92.2pre0 (973e216, 2017-07-25)" sodipodi:docname="BigTreePreemptRCUBHdyntickCB.svg"> <metadata id="metadata212"> @@ -37,15 +37,46 @@ <marker inkscape:stockid="Arrow1Mend" orient="auto" - refY="0.0" - refX="0.0" + refY="0" + refX="0" + id="marker1177" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path897" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Lend" + orient="auto" + refY="0" + refX="0" + id="Arrow1Lend" + style="overflow:visible" + inkscape:isstock="true"> + <path + id="path891" + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt;stroke-opacity:1" + transform="matrix(-0.8,0,0,-0.8,-10,0)" + inkscape:connector-curvature="0" /> + </marker> + <marker + inkscape:stockid="Arrow1Mend" + orient="auto" + refY="0" + refX="0" id="Arrow1Mend" - style="overflow:visible;"> + style="overflow:visible"> <path id="path3970" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> </marker> </defs> <sodipodi:namedview @@ -57,802 +88,575 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="881" - inkscape:window-height="1128" + inkscape:window-width="1920" + inkscape:window-height="1019" id="namedview208" showgrid="false" inkscape:zoom="1.0195195" - inkscape:cx="333" - inkscape:cy="445.49997" - inkscape:window-x="936" - inkscape:window-y="24" - inkscape:window-maximized="0" + inkscape:cx="166.25478" + inkscape:cy="362.18693" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" inkscape:current-layer="g4" /> <g - style="stroke-width:.025in; fill:none" - id="g4"> + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(0,-2415.6743)"> <!-- Line: box --> - <rect - x="900" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> <!-- Line: box --> - <rect - x="1200" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect8" /> <!-- Line: box --> - <rect - x="5400" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect10" /> <!-- Line: box --> - <rect - x="450" - y="450" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect12" /> <!-- Line: box --> - <rect - x="750" - y="1050" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect14" /> <!-- Line: box --> - <rect - x="4950" - y="5400" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect16" /> <!-- Line --> - <polyline - points="5250,8550 5688,6362 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline18" /> <!-- Arrowhead on XXXpoint 5250 8550 - 5710 6240--> <polyline points="5714 6518 5704 6272 5598 6494 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline20" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline20" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="4050,9750 4486,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline22" /> <!-- Arrowhead on XXXpoint 4050 9750 - 4512 7590--> <polyline points="4514 7868 4506 7622 4396 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline24" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline24" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="1040,9750 1476,7712 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline26" /> <!-- Arrowhead on XXXpoint 1040 9750 - 1502 7590--> <polyline points="1504 7868 1496 7622 1386 7844 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline28" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline28" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="2240,8550 2676,6512 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline30" /> <!-- Arrowhead on XXXpoint 2240 8550 - 2702 6390--> <polyline points="2704 6668 2696 6422 2586 6644 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline32" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline32" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="4050,9600 5692,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline34" /> <!-- Arrowhead on XXXpoint 4050 9600 - 5744 5948--> <polyline points="5682 6220 5730 5978 5574 6170 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline36" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline36" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line --> - <polyline - points="1086,9600 2728,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline38" /> <!-- Arrowhead on XXXpoint 1086 9600 - 2780 5948--> <polyline points="2718 6220 2766 5978 2610 6170 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline40" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline40" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Line: box --> <rect - x="0" - y="900" + x="12.340758" + y="2442.5947" width="6300" - height="7350" + height="7045.3135" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + style="fill:#ffffff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect42" /> <!-- Line: box --> <rect - x="300" - y="1500" + x="312.34076" + y="3017.7224" width="5700" - height="3750" + height="3594.5476" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + style="fill:#ffff00;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect44" /> <!-- Line --> <polyline points="1350,3900 2350,3040 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline46" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline46" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 1350 3900 - 2444 2960--> <!-- Line --> <polyline points="4950,3900 3948,3040 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline50" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline50" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 4950 3900 - 3854 2960--> <!-- Line --> <polyline points="4050,7050 4050,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline54" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline54" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 4050 7050 - 4050 4740--> <!-- Line --> <polyline points="1050,7050 1050,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline58" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline58" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 1050 7050 - 1050 4740--> <!-- Line --> <polyline points="2250,5850 2250,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline62" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline62" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 2250 5850 - 2250 4740--> <!-- Line --> - <polyline - points="2250,8550 2250,6814 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline66" /> <!-- Arrowhead on XXXpoint 2250 8550 - 2250 6690--> <!-- Line --> - <polyline - points="1050,9750 1050,8014 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline70" /> <!-- Arrowhead on XXXpoint 1050 9750 - 1050 7890--> <!-- Line --> - <polyline - points="4050,9750 4050,8014 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline74" /> <!-- Arrowhead on XXXpoint 4050 9750 - 4050 7890--> <!-- Line --> - <polyline - points="5250,8550 5250,6814 " - style="stroke:#00ff00;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline78" /> <!-- Arrowhead on XXXpoint 5250 8550 - 5250 6690--> <!-- Line --> - <polyline - points="6000,6300 8048,7910 " - style="stroke:#87cfff;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline82" /> <!-- Arrowhead on XXXpoint 6000 6300 - 8146 7986--> <!-- Circle --> - <circle - cx="2850" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle86" /> + <ellipse + cx="2862.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle86" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="3150" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle88" /> + <ellipse + cx="3162.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle88" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="3450" - cy="4350" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle90" /> + <ellipse + cx="3462.3408" + cy="5749.5786" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle90" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle92" /> + <ellipse + cx="1362.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle92" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle94" /> + <ellipse + cx="1662.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle94" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="1950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle96" /> + <ellipse + cx="1962.3407" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle96" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4350" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle98" /> + <ellipse + cx="4362.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle98" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4650" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle100" /> + <ellipse + cx="4662.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle100" + rx="76" + ry="72.849495" /> <!-- Circle --> - <circle - cx="4950" - cy="5550" - r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" - id="circle102" /> + <ellipse + cx="4962.3408" + cy="6899.834" + style="fill:#000000;stroke:#000000;stroke-width:13.70675087" + id="circle102" + rx="76" + ry="72.849495" /> <!-- Line: box --> <rect - x="7350" - y="7950" + x="6745.3027" + y="8146.0654" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect104" /> <!-- Line: box --> <rect - x="7350" - y="9450" + x="6745.3027" + y="9583.8857" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect106" /> <!-- Line --> <polyline points="8100,8850 8100,9384 " - style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline108" /> + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter;marker-end:url(#Arrow1Mend)" + id="polyline108" + transform="matrix(1,0,0,0.95854605,-604.69715,525.62477)" /> <!-- Arrowhead on XXXpoint 8100 8850 - 8100 9510--> <!-- Line: box --> <rect - x="7350" - y="10950" + x="6745.3027" + y="11021.704" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect112" /> <!-- Line --> <polyline points="8100,10350 8100,10884 " - style="stroke:#000000;stroke-width:30;stroke-linejoin:miter;stroke-linecap:butt;marker-end:url(#Arrow1Mend)" - id="polyline114" /> + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter;marker-end:url(#Arrow1Mend)" + id="polyline114" + transform="matrix(1,0,0,0.95854605,-604.69715,525.62477)" /> <!-- Arrowhead on XXXpoint 8100 10350 - 8100 11010--> <!-- Line: box --> <rect - x="750" - y="3900" + x="762.34076" + y="5318.2324" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect118" /> <!-- Line: box --> <rect - x="300" - y="7050" + x="312.34076" + y="8337.6533" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect120" /> <!-- Line: box --> <rect - x="3750" - y="3900" + x="3762.3408" + y="5318.2324" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect122" /> <!-- Line: box --> <rect - x="4500" - y="5850" + x="4512.3408" + y="7187.3975" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect124" /> <!-- Line: box --> <rect - x="3300" - y="7050" + x="3312.3408" + y="8337.6533" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect126" /> <!-- Line: box --> <rect - x="2250" - y="2100" + x="2262.3408" + y="3592.8503" width="1800" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect128" /> <!-- Line: box --> - <rect - x="0" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect130" /> <!-- Line: box --> - <rect - x="1350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect132" /> <!-- Line: box --> - <rect - x="3000" - y="9750" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect134" /> <!-- Line: box --> - <rect - x="4350" - y="8550" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect136" /> <!-- Line: box --> <rect - x="1500" - y="5850" + x="1512.3407" + y="7187.3975" width="1500" - height="900" + height="862.69141" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:29.37160873;stroke-linecap:butt;stroke-linejoin:miter" id="rect138" /> <!-- Text --> <text xml:space="preserve" - x="8100" - y="8250" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="8614.0625" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text140">struct</text> + id="text140" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="8550" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="8907.7783" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text142">rcu_head</text> + id="text142" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="9750" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="10082.644" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text144">struct</text> + id="text144" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="10050" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="10376.36" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text146">rcu_head</text> + id="text146" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="11250" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="11551.224" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text148">struct</text> + id="text148" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="8100" - y="11550" - fill="#000000" - font-family="Courier" + x="7338.3037" + y="11844.94" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text150">rcu_head</text> + id="text150" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_head</text> <!-- Text --> <text xml:space="preserve" - x="6000" - y="1200" - fill="#000000" - font-family="Helvetica" + x="5886.4043" + y="2788.5688" font-style="normal" font-weight="normal" font-size="192" - text-anchor="end" - id="text152">rcu_sched</text> + id="text152" + style="font-style:normal;font-weight:normal;font-size:187.978302px;font-family:Helvetica;text-anchor:end;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="750" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text154">rcu_bh</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2400" - fill="#000000" - font-family="Courier" + x="3096.1016" + y="3963.4336" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text156">struct</text> + id="text156" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2700" - fill="#000000" - font-family="Courier" + x="3096.1016" + y="4257.1494" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text158">rcu_node</text> + id="text158" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4200" - fill="#000000" - font-family="Courier" + x="1627.5209" + y="5725.7305" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text160">struct</text> + id="text160" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4500" - fill="#000000" - font-family="Courier" + x="1627.5209" + y="6019.4463" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text162">rcu_node</text> + id="text162" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4500" - fill="#000000" - font-family="Courier" + x="4564.6821" + y="6019.4463" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text164">rcu_node</text> + id="text164" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4200" - fill="#000000" - font-family="Courier" + x="4564.6821" + y="5725.7305" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text166">struct</text> + id="text166" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6150" - fill="#000000" - font-family="Courier" + x="2214.9531" + y="7634.8848" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text168">struct</text> + id="text168" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6450" - fill="#000000" - font-family="Courier" + x="2214.9531" + y="7928.6011" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text170">rcu_data</text> + id="text170" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7350" - fill="#000000" - font-family="Courier" + x="1040.0886" + y="8809.749" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text172">struct</text> + id="text172" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7650" - fill="#000000" - font-family="Courier" + x="1040.0886" + y="9103.4648" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text174">rcu_data</text> + id="text174" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6150" - fill="#000000" - font-family="Courier" + x="5152.1138" + y="7634.8848" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text176">struct</text> + id="text176" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6450" - fill="#000000" - font-family="Courier" + x="5152.1138" + y="7928.6011" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text178">rcu_data</text> + id="text178" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7350" - fill="#000000" - font-family="Courier" + x="3977.2495" + y="8809.749" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text180">struct</text> + id="text180" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7650" - fill="#000000" - font-family="Courier" + x="3977.2495" + y="9103.4648" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text182">rcu_data</text> + id="text182" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:middle;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="450" - y="1800" - fill="#000000" - font-family="Courier" + x="452.6564" + y="3376.0012" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text184">struct rcu_state</text> + id="text184" + style="font-style:normal;font-weight:bold;font-size:187.978302px;font-family:Courier;text-anchor:start;fill:#000000;stroke-width:0.02447634in" + transform="scale(1.0213945,0.97905363)">struct rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text186">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text188">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10050" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text190">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="10350" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text192">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text194">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text196">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8850" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text198">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="9150" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text200">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="6900" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text202">rcu_preempt</text> <!-- Line --> <polyline points="5250,5850 5250,4864 " - style="stroke:#00d1d1;stroke-width:29.99463964;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline204" /> + style="stroke:#00d1d1;stroke-width:29.99464035;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline204" + transform="matrix(1,0,0,0.95854605,12.340758,1579.9033)" /> <!-- Arrowhead on XXXpoint 5250 5850 - 5250 4740--> + <path + style="fill:none;stroke:#000000;stroke-width:34.24744034;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#marker1177)" + d="m 6000.1472,7564.2558 c 1498.5508,0 1498.5508,0 1498.5508,0 v 520.0252" + id="path886" + inkscape:connector-curvature="0" /> </g> </svg> diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html index 1d2051c0c3fc..18f179807563 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -23,8 +23,6 @@ to each other. The <tt>rcu_segcblist</tt> Structure</a> <li> <a href="#The rcu_data Structure"> The <tt>rcu_data</tt> Structure</a> -<li> <a href="#The rcu_dynticks Structure"> - The <tt>rcu_dynticks</tt> Structure</a> <li> <a href="#The rcu_head Structure"> The <tt>rcu_head</tt> Structure</a> <li> <a href="#RCU-Specific Fields in the task_struct Structure"> @@ -127,9 +125,11 @@ CPUs, RCU would configure the <tt>rcu_node</tt> tree as follows: </p><p>RCU currently permits up to a four-level tree, which on a 64-bit system accommodates up to 4,194,304 CPUs, though only a mere 524,288 CPUs for 32-bit systems. -On the other hand, you can set <tt>CONFIG_RCU_FANOUT</tt> to be -as small as 2 if you wish, which would permit only 16 CPUs, which -is useful for testing. +On the other hand, you can set both <tt>CONFIG_RCU_FANOUT</tt> and +<tt>CONFIG_RCU_FANOUT_LEAF</tt> to be as small as 2, which would result +in a 16-CPU test using a 4-level tree. +This can be useful for testing large-system capabilities on small test +machines. </p><p>This multi-level combining tree allows us to get most of the performance and scalability @@ -154,44 +154,9 @@ on that root <tt>rcu_node</tt> structure remains acceptably low. keeping lock contention under control at all tree levels regardless of the level of loading on the system. -</p><p>The Linux kernel actually supports multiple flavors of RCU -running concurrently, so RCU builds separate data structures for each -flavor. -For example, for <tt>CONFIG_TREE_RCU=y</tt> kernels, RCU provides -rcu_sched and rcu_bh, as shown below: - -</p><p><img src="BigTreeClassicRCUBH.svg" alt="BigTreeClassicRCUBH.svg" width="33%"> - -</p><p>Energy efficiency is increasingly important, and for that -reason the Linux kernel provides <tt>CONFIG_NO_HZ_IDLE</tt>, which -turns off the scheduling-clock interrupts on idle CPUs, which in -turn allows those CPUs to attain deeper sleep states and to consume -less energy. -CPUs whose scheduling-clock interrupts have been turned off are -said to be in <i>dyntick-idle mode</i>. -RCU must handle dyntick-idle CPUs specially -because RCU would otherwise wake up each CPU on every grace period, -which would defeat the whole purpose of <tt>CONFIG_NO_HZ_IDLE</tt>. -RCU uses the <tt>rcu_dynticks</tt> structure to track -which CPUs are in dyntick idle mode, as shown below: - -</p><p><img src="BigTreeClassicRCUBHdyntick.svg" alt="BigTreeClassicRCUBHdyntick.svg" width="33%"> - -</p><p>However, if a CPU is in dyntick-idle mode, it is in that mode -for all flavors of RCU. -Therefore, a single <tt>rcu_dynticks</tt> structure is allocated per -CPU, and all of a given CPU's <tt>rcu_data</tt> structures share -that <tt>rcu_dynticks</tt>, as shown in the figure. - -</p><p>Kernels built with <tt>CONFIG_PREEMPT_RCU</tt> support -rcu_preempt in addition to rcu_sched and rcu_bh, as shown below: - -</p><p><img src="BigTreePreemptRCUBHdyntick.svg" alt="BigTreePreemptRCUBHdyntick.svg" width="35%"> - </p><p>RCU updaters wait for normal grace periods by registering RCU callbacks, either directly via <tt>call_rcu()</tt> and friends (namely <tt>call_rcu_bh()</tt> and <tt>call_rcu_sched()</tt>), -there being a separate interface per flavor of RCU) or indirectly via <tt>synchronize_rcu()</tt> and friends. RCU callbacks are represented by <tt>rcu_head</tt> structures, which are queued on <tt>rcu_data</tt> structures while they are @@ -214,9 +179,6 @@ its own synchronization: <li> Each <tt>rcu_node</tt> structure has a spinlock. <li> The fields in <tt>rcu_data</tt> are private to the corresponding CPU, although a few can be read and written by other CPUs. -<li> Similarly, the fields in <tt>rcu_dynticks</tt> are private - to the corresponding CPU, although a few can be read by - other CPUs. </ol> <p>It is important to note that different data structures can have @@ -272,11 +234,6 @@ follows: access to this information from the corresponding CPU. Finally, this structure records past dyntick-idle state for the corresponding CPU and also tracks statistics. -<li> <tt>rcu_dynticks</tt>: - This per-CPU structure tracks the current dyntick-idle - state for the corresponding CPU. - Unlike the other three structures, the <tt>rcu_dynticks</tt> - structure is not replicated per RCU flavor. <li> <tt>rcu_head</tt>: This structure represents RCU callbacks, and is the only structure allocated and managed by RCU users. @@ -287,14 +244,14 @@ follows: <p>If all you wanted from this article was a general notion of how RCU's data structures are related, you are done. Otherwise, each of the following sections give more details on -the <tt>rcu_state</tt>, <tt>rcu_node</tt>, <tt>rcu_data</tt>, -and <tt>rcu_dynticks</tt> data structures. +the <tt>rcu_state</tt>, <tt>rcu_node</tt> and <tt>rcu_data</tt> data +structures. <h3><a name="The rcu_state Structure"> The <tt>rcu_state</tt> Structure</a></h3> <p>The <tt>rcu_state</tt> structure is the base structure that -represents a flavor of RCU. +represents the state of RCU in the system. This structure forms the interconnection between the <tt>rcu_node</tt> and <tt>rcu_data</tt> structures, tracks grace periods, contains the lock used to @@ -389,7 +346,7 @@ sequence number. The bottom two bits are the state of the current grace period, which can be zero for not yet started or one for in progress. In other words, if the bottom two bits of <tt>->gp_seq</tt> are -zero, the corresponding flavor of RCU is idle. +zero, then RCU is idle. Any other value in the bottom two bits indicates that something is broken. This field is protected by the root <tt>rcu_node</tt> structure's <tt>->lock</tt> field. @@ -419,10 +376,10 @@ as follows: grace period in jiffies. It is protected by the root <tt>rcu_node</tt>'s <tt>->lock</tt>. -<p>The <tt>->name</tt> field points to the name of the RCU flavor -(for example, “rcu_sched”), and is constant. -The <tt>->abbr</tt> field contains a one-character abbreviation, -for example, “s” for RCU-sched. +<p>The <tt>->name</tt> and <tt>->abbr</tt> fields distinguish +between preemptible RCU (“rcu_preempt” and “p”) +and non-preemptible RCU (“rcu_sched” and “s”). +These fields are used for diagnostic and tracing purposes. <h3><a name="The rcu_node Structure"> The <tt>rcu_node</tt> Structure</a></h3> @@ -971,25 +928,31 @@ this <tt>rcu_segcblist</tt> structure, <i>not</i> the <tt>->head</tt> pointer. The reason for this is that all the ready-to-invoke callbacks (that is, those in the <tt>RCU_DONE_TAIL</tt> segment) are extracted -all at once at callback-invocation time. +all at once at callback-invocation time (<tt>rcu_do_batch</tt>), due +to which <tt>->head</tt> may be set to NULL if there are no not-done +callbacks remaining in the <tt>rcu_segcblist</tt>. If callback invocation must be postponed, for example, because a high-priority process just woke up on this CPU, then the remaining -callbacks are placed back on the <tt>RCU_DONE_TAIL</tt> segment. -Either way, the <tt>->len</tt> and <tt>->len_lazy</tt> counts -are adjusted after the corresponding callbacks have been invoked, and so -again it is the <tt>->len</tt> count that accurately reflects whether -or not there are callbacks associated with this <tt>rcu_segcblist</tt> -structure. +callbacks are placed back on the <tt>RCU_DONE_TAIL</tt> segment and +<tt>->head</tt> once again points to the start of the segment. +In short, the head field can briefly be <tt>NULL</tt> even though the +CPU has callbacks present the entire time. +Therefore, it is not appropriate to test the <tt>->head</tt> pointer +for <tt>NULL</tt>. + +<p>In contrast, the <tt>->len</tt> and <tt>->len_lazy</tt> counts +are adjusted only after the corresponding callbacks have been invoked. +This means that the <tt>->len</tt> count is zero only if +the <tt>rcu_segcblist</tt> structure really is devoid of callbacks. Of course, off-CPU sampling of the <tt>->len</tt> count requires -the use of appropriate synchronization, for example, memory barriers. +careful use of appropriate synchronization, for example, memory barriers. This synchronization can be a bit subtle, particularly in the case of <tt>rcu_barrier()</tt>. <h3><a name="The rcu_data Structure"> The <tt>rcu_data</tt> Structure</a></h3> -<p>The <tt>rcu_data</tt> maintains the per-CPU state for the -corresponding flavor of RCU. +<p>The <tt>rcu_data</tt> maintains the per-CPU state for the RCU subsystem. The fields in this structure may be accessed only from the corresponding CPU (and from tracing) unless otherwise stated. This structure is the @@ -1015,30 +978,19 @@ as follows: <pre> 1 int cpu; - 2 struct rcu_state *rsp; - 3 struct rcu_node *mynode; - 4 struct rcu_dynticks *dynticks; - 5 unsigned long grpmask; - 6 bool beenonline; + 2 struct rcu_node *mynode; + 3 unsigned long grpmask; + 4 bool beenonline; </pre> <p>The <tt>->cpu</tt> field contains the number of the -corresponding CPU, the <tt>->rsp</tt> pointer references -the corresponding <tt>rcu_state</tt> structure (and is most frequently -used to locate the name of the corresponding flavor of RCU for tracing), -and the <tt>->mynode</tt> field references the corresponding -<tt>rcu_node</tt> structure. +corresponding CPU and the <tt>->mynode</tt> field references the +corresponding <tt>rcu_node</tt> structure. The <tt>->mynode</tt> is used to propagate quiescent states up the combining tree. -<p>The <tt>->dynticks</tt> pointer references the -<tt>rcu_dynticks</tt> structure corresponding to this -CPU. -Recall that a single per-CPU instance of the <tt>rcu_dynticks</tt> -structure is shared among all flavors of RCU. -These first four fields are constant and therefore require not -synchronization. +These two fields are constant and therefore do not require synchronization. -</p><p>The <tt>->grpmask</tt> field indicates the bit in +<p>The <tt>->grpmask</tt> field indicates the bit in the <tt>->mynode->qsmask</tt> corresponding to this <tt>rcu_data</tt> structure, and is also used when propagating quiescent states. @@ -1057,12 +1009,12 @@ as follows: 3 bool cpu_no_qs; 4 bool core_needs_qs; 5 bool gpwrap; - 6 unsigned long rcu_qs_ctr_snap; </pre> -<p>The <tt>->gp_seq</tt> and <tt>->gp_seq_needed</tt> -fields are the counterparts of the fields of the same name -in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. +<p>The <tt>->gp_seq</tt> field is the counterpart of the field of the same +name in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. The +<tt>->gp_seq_needed</tt> field is the counterpart of the field of the same +name in the rcu_node</tt> structure. They may each lag up to one behind their <tt>rcu_node</tt> counterparts, but in <tt>CONFIG_NO_HZ_IDLE</tt> and <tt>CONFIG_NO_HZ_FULL</tt> kernels can lag @@ -1103,10 +1055,6 @@ CPU has remained idle for so long that the <tt>gp_seq</tt> counter is in danger of overflow, which will cause the CPU to disregard the values of its counters on its next exit from idle. -Finally, the <tt>rcu_qs_ctr_snap</tt> field is used to detect -cases where a given operation has resulted in a quiescent state -for all flavors of RCU, for example, <tt>cond_resched()</tt> -when RCU has indicated a need for quiescent states. <h5>RCU Callback Handling</h5> @@ -1179,26 +1127,22 @@ Finally, the <tt>->dynticks_fqs</tt> field is used to count the number of times this CPU is determined to be in dyntick-idle state, and is used for tracing and debugging purposes. -<h3><a name="The rcu_dynticks Structure"> -The <tt>rcu_dynticks</tt> Structure</a></h3> - -<p>The <tt>rcu_dynticks</tt> maintains the per-CPU dyntick-idle state -for the corresponding CPU. -Unlike the other structures, <tt>rcu_dynticks</tt> is not -replicated over the different flavors of RCU. -The fields in this structure may be accessed only from the corresponding -CPU (and from tracing) unless otherwise stated. -Its fields are as follows: +<p> +This portion of the rcu_data structure is declared as follows: <pre> 1 long dynticks_nesting; 2 long dynticks_nmi_nesting; 3 atomic_t dynticks; 4 bool rcu_need_heavy_qs; - 5 unsigned long rcu_qs_ctr; - 6 bool rcu_urgent_qs; + 5 bool rcu_urgent_qs; </pre> +<p>These fields in the rcu_data structure maintain the per-CPU dyntick-idle +state for the corresponding CPU. +The fields may be accessed only from the corresponding CPU (and from tracing) +unless otherwise stated. + <p>The <tt>->dynticks_nesting</tt> field counts the nesting depth of process execution, so that in normal circumstances this counter has value zero or one. @@ -1240,19 +1184,12 @@ it is willing to call for heavy-weight dyntick-counter operations. This flag is checked by RCU's context-switch and <tt>cond_resched()</tt> code, which provide a momentary idle sojourn in response. -</p><p>The <tt>->rcu_qs_ctr</tt> field is used to record -quiescent states from <tt>cond_resched()</tt>. -Because <tt>cond_resched()</tt> can execute quite frequently, this -must be quite lightweight, as in a non-atomic increment of this -per-CPU field. - </p><p>Finally, the <tt>->rcu_urgent_qs</tt> field is used to record -the fact that the RCU core code would really like to see a quiescent -state from the corresponding CPU, with the various other fields indicating -just how badly RCU wants this quiescent state. -This flag is checked by RCU's context-switch and <tt>cond_resched()</tt> -code, which, if nothing else, non-atomically increment <tt>->rcu_qs_ctr</tt> -in response. +the fact that the RCU core code would really like to see a quiescent state from +the corresponding CPU, with the various other fields indicating just how badly +RCU wants this quiescent state. +This flag is checked by RCU's context-switch path +(<tt>rcu_note_context_switch</tt>) and the cond_resched code. <table> <tr><th> </th></tr> @@ -1425,11 +1362,11 @@ the last part of the array, thus traversing only the leaf <h3><a name="Summary"> Summary</a></h3> -So each flavor of RCU is represented by an <tt>rcu_state</tt> structure, +So the state of RCU is represented by an <tt>rcu_state</tt> structure, which contains a combining tree of <tt>rcu_node</tt> and <tt>rcu_data</tt> structures. Finally, in <tt>CONFIG_NO_HZ_IDLE</tt> kernels, each CPU's dyntick-idle -state is tracked by an <tt>rcu_dynticks</tt> structure. +state is tracked by dynticks-related fields in the <tt>rcu_data</tt> structure. If you made it this far, you are well prepared to read the code walkthroughs in the other articles in this series. diff --git a/Documentation/RCU/Design/Data-Structures/blkd_task.svg b/Documentation/RCU/Design/Data-Structures/blkd_task.svg index 00e810bb8419..bed13e9ecab8 100644 --- a/Documentation/RCU/Design/Data-Structures/blkd_task.svg +++ b/Documentation/RCU/Design/Data-Structures/blkd_task.svg @@ -14,12 +14,12 @@ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" width="10.1in" - height="8.6in" - viewBox="-44 -44 12088 10288" + height="6.5999999in" + viewBox="-44 -44 12088 7895.4414" id="svg2" version="1.1" - inkscape:version="0.48.4 r9939" - sodipodi:docname="blkd_task.fig"> + inkscape:version="0.92.2pre0 (973e216, 2017-07-25)" + sodipodi:docname="blkd_task.svg"> <metadata id="metadata212"> <rdf:RDF> @@ -37,15 +37,16 @@ <marker inkscape:stockid="Arrow1Mend" orient="auto" - refY="0.0" - refX="0.0" + refY="0" + refX="0" id="Arrow1Mend" - style="overflow:visible;"> + style="overflow:visible"> <path id="path3970" - d="M 0.0,0.0 L 5.0,-5.0 L -12.5,0.0 L 5.0,5.0 L 0.0,0.0 z " - style="fill-rule:evenodd;stroke:#000000;stroke-width:1.0pt;" - transform="scale(0.4) rotate(180) translate(10,0)" /> + d="M 0,0 5,-5 -12.5,0 5,5 Z" + style="fill-rule:evenodd;stroke:#000000;stroke-width:1.00000003pt" + transform="matrix(-0.4,0,0,-0.4,-4,0)" + inkscape:connector-curvature="0" /> </marker> </defs> <sodipodi:namedview @@ -57,787 +58,574 @@ guidetolerance="10" inkscape:pageopacity="0" inkscape:pageshadow="2" - inkscape:window-width="1087" - inkscape:window-height="1144" + inkscape:window-width="1920" + inkscape:window-height="1019" id="namedview208" showgrid="false" inkscape:zoom="1.0495049" - inkscape:cx="454.50003" - inkscape:cy="387.00003" - inkscape:window-x="833" - inkscape:window-y="28" - inkscape:window-maximized="0" - inkscape:current-layer="g4" /> + inkscape:cx="456.40569" + inkscape:cy="348.88682" + inkscape:window-x="0" + inkscape:window-y="0" + inkscape:window-maximized="1" + inkscape:current-layer="g4" + showguides="false" /> <g - style="stroke-width:.025in; fill:none" - id="g4"> + style="fill:none;stroke-width:0.025in" + id="g4" + transform="translate(0,-2393.6637)"> <!-- Line: box --> - <rect - x="450" - y="0" - width="6300" - height="7350" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " - id="rect6" /> <!-- Line: box --> - <rect - x="4950" - y="4950" - width="1500" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " - id="rect8" /> <!-- Line: box --> - <rect - x="750" - y="600" - width="5700" - height="3750" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " - id="rect10" /> <!-- Line --> - <polyline - points="5250,8100 5688,5912 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline12" /> <!-- Arrowhead on XXXpoint 5250 8100 - 5710 5790--> <polyline points="5714 6068 5704 5822 5598 6044 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline14" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline14" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="4050,9300 4486,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline16" /> <!-- Arrowhead on XXXpoint 4050 9300 - 4512 7140--> <polyline points="4514 7418 4506 7172 4396 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline18" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline18" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="1040,9300 1476,7262 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline20" /> <!-- Arrowhead on XXXpoint 1040 9300 - 1502 7140--> <polyline points="1504 7418 1496 7172 1386 7394 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline22" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline22" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> - <polyline - points="2240,8100 2676,6062 " - style="stroke:#00ff00;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " - id="polyline24" /> <!-- Arrowhead on XXXpoint 2240 8100 - 2702 5940--> <polyline points="2704 6218 2696 5972 2586 6194 " - style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8; " - id="polyline26" /> + style="stroke:#00ff00;stroke-width:14;stroke-miterlimit:8" + id="polyline26" + transform="translate(23.757862,2185.7233)" /> <!-- Line: box --> <rect - x="0" - y="450" + x="23.757858" + y="2635.7231" width="6300" height="7350" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffffff; " + style="fill:#ffffff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect28" /> <!-- Line: box --> <rect - x="300" - y="1050" + x="323.75787" + y="3235.7231" width="5700" height="3750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffff00; " + style="fill:#ffff00;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect30" /> <!-- Line --> <polyline points="1350,3450 2350,2590 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline32" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline32" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 1350 3450 - 2444 2510--> <!-- Line --> <polyline points="4950,3450 3948,2590 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline36" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline36" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 4950 3450 - 3854 2510--> <!-- Line --> <polyline points="4050,6600 4050,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline40" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline40" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 4050 6600 - 4050 4290--> <!-- Line --> <polyline points="1050,6600 1050,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline44" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline44" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 1050 6600 - 1050 4290--> <!-- Line --> <polyline points="2250,5400 2250,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline48" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline48" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 2250 5400 - 2250 4290--> <!-- Line --> - <polyline - points="2250,8100 2250,6364 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline52" /> <!-- Arrowhead on XXXpoint 2250 8100 - 2250 6240--> <!-- Line --> - <polyline - points="1050,9300 1050,7564 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline56" /> <!-- Arrowhead on XXXpoint 1050 9300 - 1050 7440--> <!-- Line --> - <polyline - points="4050,9300 4050,7564 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline60" /> <!-- Arrowhead on XXXpoint 4050 9300 - 4050 7440--> <!-- Line --> - <polyline - points="5250,8100 5250,6364 " - style="stroke:#00ff00;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline64" /> <!-- Arrowhead on XXXpoint 5250 8100 - 5250 6240--> <!-- Circle --> <circle - cx="2850" - cy="3900" + cx="2873.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle68" /> <!-- Circle --> <circle - cx="3150" - cy="3900" + cx="3173.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle70" /> <!-- Circle --> <circle - cx="3450" - cy="3900" + cx="3473.7581" + cy="6085.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle72" /> <!-- Circle --> <circle - cx="1350" - cy="5100" + cx="1373.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle74" /> <!-- Circle --> <circle - cx="1650" - cy="5100" + cx="1673.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle76" /> <!-- Circle --> <circle - cx="1950" - cy="5100" + cx="1973.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle78" /> <!-- Circle --> <circle - cx="4350" - cy="5100" + cx="4373.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle80" /> <!-- Circle --> <circle - cx="4650" - cy="5100" + cx="4673.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle82" /> <!-- Circle --> <circle - cx="4950" - cy="5100" + cx="4973.7578" + cy="7285.7236" r="76" - style="fill:#000000;stroke:#000000;stroke-width:14;" + style="fill:#000000;stroke:#000000;stroke-width:14" id="circle84" /> <!-- Line: box --> <rect - x="750" - y="3450" + x="773.75781" + y="5635.7236" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect86" /> <!-- Line: box --> <rect - x="300" - y="6600" + x="323.75787" + y="8785.7227" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect88" /> <!-- Line: box --> <rect - x="4500" - y="5400" + x="4523.7578" + y="7585.7236" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect90" /> <!-- Line: box --> <rect - x="3300" - y="6600" + x="3323.7581" + y="8785.7227" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect92" /> <!-- Line: box --> <rect - x="2250" - y="1650" + x="2273.7581" + y="3835.7231" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect94" /> <!-- Line: box --> - <rect - x="0" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect96" /> <!-- Line: box --> - <rect - x="1350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect98" /> <!-- Line: box --> - <rect - x="3000" - y="9300" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect100" /> <!-- Line: box --> - <rect - x="4350" - y="8100" - width="2100" - height="900" - rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#00ff00; " - id="rect102" /> <!-- Line: box --> <rect - x="1500" - y="5400" + x="1523.7578" + y="7585.7236" width="1500" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#87cfff; " + style="fill:#87cfff;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect104" /> <!-- Line --> <polygon - points="5550,3450 7350,2850 7350,5100 5550,4350 5550,3450 " - style="stroke:#000000;stroke-width:14; stroke-linejoin:miter; stroke-linecap:butt; stroke-dasharray:120 120;fill:#ffbfbf; " - id="polygon106" /> + points="7350,2850 7350,5100 5550,4350 5550,3450 " + style="fill:#ffbfbf;stroke:#000000;stroke-width:14;stroke-linecap:butt;stroke-linejoin:miter;stroke-dasharray:120, 120" + id="polygon106" + transform="translate(23.757862,2185.7233)" /> <!-- Line --> <polyline points="9300,3150 10734,3150 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline108" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline108" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9300 3150 - 10860 3150--> <!-- Line: box --> <rect - x="10800" - y="2850" + x="10823.758" + y="5035.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect112" /> <!-- Line --> <polyline points="11400,3600 11400,4284 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline114" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline114" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 11400 3600 - 11400 4410--> <!-- Line: box --> <rect - x="10800" - y="4350" + x="10823.758" + y="6535.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect118" /> <!-- Line --> <polyline points="11400,5100 11400,5784 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline120" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline120" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 11400 5100 - 11400 5910--> <!-- Line: box --> <rect - x="10800" - y="5850" + x="10823.758" + y="8035.7236" width="1200" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; " + style="stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect124" /> <!-- Line --> <polyline points="9300,3900 9900,3900 9900,4650 10734,4650 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline126" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline126" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9900 4650 - 10860 4650--> <!-- Line --> <polyline points="9300,4650 9600,4650 9600,6150 10734,6150 " - style="stroke:#000000;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline130" /> + style="stroke:#000000;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline130" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 9600 6150 - 10860 6150--> <!-- Text --> - <text - xml:space="preserve" - x="6450" - y="300" - fill="#000000" - font-family="Helvetica" - font-style="normal" - font-weight="normal" - font-size="192" - text-anchor="end" - id="text134">rcu_bh</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="1950" - fill="#000000" - font-family="Courier" + x="3173.7581" + y="4135.7231" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text136">struct</text> + id="text136" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="3150" - y="2250" - fill="#000000" - font-family="Courier" + x="3173.7581" + y="4435.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text138">rcu_node</text> + id="text138" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="3750" - fill="#000000" - font-family="Courier" + x="1673.7578" + y="5935.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text140">struct</text> + id="text140" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="1650" - y="4050" - fill="#000000" - font-family="Courier" + x="1673.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text142">rcu_node</text> + id="text142" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="5700" - fill="#000000" - font-family="Courier" + x="2273.7581" + y="7885.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text144">struct</text> + id="text144" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="2250" - y="6000" - fill="#000000" - font-family="Courier" + x="2273.7581" + y="8185.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text146">rcu_data</text> + id="text146" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="6900" - fill="#000000" - font-family="Courier" + x="1073.7578" + y="9085.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text148">struct</text> + id="text148" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="1050" - y="7200" - fill="#000000" - font-family="Courier" + x="1073.7578" + y="9385.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text150">rcu_data</text> + id="text150" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="5700" - fill="#000000" - font-family="Courier" + x="5273.7578" + y="7885.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text152">struct</text> + id="text152" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="5250" - y="6000" - fill="#000000" - font-family="Courier" + x="5273.7578" + y="8185.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text154">rcu_data</text> + id="text154" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="6900" - fill="#000000" - font-family="Courier" + x="4073.7578" + y="9085.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text156">struct</text> + id="text156" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="4050" - y="7200" - fill="#000000" - font-family="Courier" + x="4073.7578" + y="9385.7227" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text158">rcu_data</text> + id="text158" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_data</text> <!-- Text --> <text xml:space="preserve" - x="450" - y="1350" - fill="#000000" - font-family="Courier" + x="473.75784" + y="3535.7231" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text160">struct rcu_state</text> + id="text160" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">struct rcu_state</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text162">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="1050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text164">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9600" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text166">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="4050" - y="9900" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text168">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text170">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="2400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text172">rcu_dynticks</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8400" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text174">struct</text> <!-- Text --> - <text - xml:space="preserve" - x="5400" - y="8700" - fill="#000000" - font-family="Courier" - font-style="normal" - font-weight="bold" - font-size="192" - text-anchor="middle" - id="text176">rcu_dynticks</text> <!-- Text --> <text xml:space="preserve" - x="6000" - y="750" - fill="#000000" - font-family="Helvetica" + x="6023.7578" + y="2935.7231" font-style="normal" font-weight="normal" font-size="192" - text-anchor="end" - id="text178">rcu_sched</text> + id="text178" + style="font-style:normal;font-weight:normal;font-size:192px;font-family:Helvetica;text-anchor:end;fill:#000000">rcu_state</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="3300" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="5485.7236" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text180">T3</text> + id="text180" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T3</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="4800" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="6985.7236" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text182">T2</text> + id="text182" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T2</text> <!-- Text --> <text xml:space="preserve" - x="11400" - y="6300" - fill="#000000" - font-family="Helvetica" + x="11423.758" + y="8485.7227" font-style="normal" font-weight="normal" font-size="216" - text-anchor="middle" - id="text184">T1</text> + id="text184" + style="font-style:normal;font-weight:normal;font-size:216px;font-family:Helvetica;text-anchor:middle;fill:#000000">T1</text> <!-- Line --> <polyline points="5250,5400 5250,4414 " - style="stroke:#00d1d1;stroke-width:30.00057884;stroke-linejoin:miter;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" - id="polyline186" /> + style="stroke:#00d1d1;stroke-width:30.00057793;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow1Mend)" + id="polyline186" + transform="translate(23.757862,2185.7233)" /> <!-- Arrowhead on XXXpoint 5250 5400 - 5250 4290--> <!-- Line: box --> <rect - x="3750" - y="3450" + x="3773.7581" + y="5635.7236" width="1800" height="900" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect190" /> <!-- Line: box --> <rect - x="7350" - y="2850" + x="7373.7578" + y="5035.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect192" /> <!-- Line: box --> <rect - x="7350" - y="3600" + x="7373.7578" + y="5785.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect194" /> <!-- Line: box --> <rect - x="7350" - y="4350" + x="7373.7578" + y="6535.7236" width="1950" height="750" rx="0" - style="stroke:#000000;stroke-width:30; stroke-linejoin:miter; stroke-linecap:butt; fill:#ffbfbf; " + style="fill:#ffbfbf;stroke:#000000;stroke-width:30;stroke-linecap:butt;stroke-linejoin:miter" id="rect196" /> <!-- Text --> <text xml:space="preserve" - x="4650" - y="4050" - fill="#000000" - font-family="Courier" + x="4673.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text198">rcu_node</text> + id="text198" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">rcu_node</text> <!-- Text --> <text xml:space="preserve" - x="4650" - y="3750" - fill="#000000" - font-family="Courier" + x="4673.7578" + y="5935.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="middle" - id="text200">struct</text> + id="text200" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:middle;fill:#000000">struct</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="3300" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="5485.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text202">blkd_tasks</text> + id="text202" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">blkd_tasks</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="4050" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="6235.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text204">gp_tasks</text> + id="text204" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">gp_tasks</text> <!-- Text --> <text xml:space="preserve" - x="7500" - y="4800" - fill="#000000" - font-family="Courier" + x="7523.7578" + y="6985.7236" font-style="normal" font-weight="bold" font-size="192" - text-anchor="start" - id="text206">exp_tasks</text> + id="text206" + style="font-style:normal;font-weight:bold;font-size:192px;font-family:Courier;text-anchor:start;fill:#000000">exp_tasks</text> </g> </svg> diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html index e62c7c34a369..8e4f873b979f 100644 --- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html @@ -160,9 +160,9 @@ was in flight. If the CPU is idle, then <tt>sync_sched_exp_handler()</tt> reports the quiescent state. -<p> -Otherwise, the handler invokes <tt>resched_cpu()</tt>, which forces -a future context switch. +<p> Otherwise, the handler forces a future context switch by setting the +NEED_RESCHED flag of the current task's thread flag and the CPU preempt +counter. At the time of the context switch, the CPU reports the quiescent state. Should the CPU go offline first, it will report the quiescent state at that time. diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html index a346ce0116eb..e4d94fba6c89 100644 --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html @@ -77,7 +77,7 @@ The key point is that the lock-acquisition functions, including <tt>smp_mb__after_unlock_lock()</tt> immediately after successful acquisition of the lock. -<p>Therefore, for any given <tt>rcu_node</tt> struction, any access +<p>Therefore, for any given <tt>rcu_node</tt> structure, any access happening before one of the above lock-release functions will be seen by all CPUs as happening before any access happening after a later one of the above lock-acquisition functions. diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index 43c4e2f05f40..9fca73e03a98 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -900,8 +900,6 @@ Except where otherwise noted, these non-guarantees were premeditated. Grace Periods Don't Partition Read-Side Critical Sections</a> <li> <a href="#Read-Side Critical Sections Don't Partition Grace Periods"> Read-Side Critical Sections Don't Partition Grace Periods</a> -<li> <a href="#Disabling Preemption Does Not Block Grace Periods"> - Disabling Preemption Does Not Block Grace Periods</a> </ol> <h3><a name="Readers Impose Minimal Ordering">Readers Impose Minimal Ordering</a></h3> @@ -1259,54 +1257,6 @@ of RCU grace periods. <tr><td> </td></tr> </table> -<h3><a name="Disabling Preemption Does Not Block Grace Periods"> -Disabling Preemption Does Not Block Grace Periods</a></h3> - -<p> -There was a time when disabling preemption on any given CPU would block -subsequent grace periods. -However, this was an accident of implementation and is not a requirement. -And in the current Linux-kernel implementation, disabling preemption -on a given CPU in fact does not block grace periods, as Oleg Nesterov -<a href="https://lkml.kernel.org/g/20150614193825.GA19582@redhat.com">demonstrated</a>. - -<p> -If you need a preempt-disable region to block grace periods, you need to add -<tt>rcu_read_lock()</tt> and <tt>rcu_read_unlock()</tt>, for example -as follows: - -<blockquote> -<pre> - 1 preempt_disable(); - 2 rcu_read_lock(); - 3 do_something(); - 4 rcu_read_unlock(); - 5 preempt_enable(); - 6 - 7 /* Spinlocks implicitly disable preemption. */ - 8 spin_lock(&mylock); - 9 rcu_read_lock(); -10 do_something(); -11 rcu_read_unlock(); -12 spin_unlock(&mylock); -</pre> -</blockquote> - -<p> -In theory, you could enter the RCU read-side critical section first, -but it is more efficient to keep the entire RCU read-side critical -section contained in the preempt-disable region as shown above. -Of course, RCU read-side critical sections that extend outside of -preempt-disable regions will work correctly, but such critical sections -can be preempted, which forces <tt>rcu_read_unlock()</tt> to do -more work. -And no, this is <i>not</i> an invitation to enclose all of your RCU -read-side critical sections within preempt-disable regions, because -doing so would degrade real-time response. - -<p> -This non-requirement appeared with preemptible RCU. - <h2><a name="Parallelism Facts of Life">Parallelism Facts of Life</a></h2> <p> @@ -1381,6 +1331,7 @@ Classes of quality-of-implementation requirements are as follows: <ol> <li> <a href="#Specialization">Specialization</a> <li> <a href="#Performance and Scalability">Performance and Scalability</a> +<li> <a href="#Forward Progress">Forward Progress</a> <li> <a href="#Composability">Composability</a> <li> <a href="#Corner Cases">Corner Cases</a> </ol> @@ -1645,7 +1596,7 @@ used in place of <tt>synchronize_rcu()</tt> as follows: 16 struct foo *p; 17 18 spin_lock(&gp_lock); -19 p = rcu_dereference(gp); +19 p = rcu_access_pointer(gp); 20 if (!p) { 21 spin_unlock(&gp_lock); 22 return false; @@ -1822,6 +1773,106 @@ so it is too early to tell whether they will stand the test of time. RCU thus provides a range of tools to allow updaters to strike the required tradeoff between latency, flexibility and CPU overhead. +<h3><a name="Forward Progress">Forward Progress</a></h3> + +<p> +In theory, delaying grace-period completion and callback invocation +is harmless. +In practice, not only are memory sizes finite but also callbacks sometimes +do wakeups, and sufficiently deferred wakeups can be difficult +to distinguish from system hangs. +Therefore, RCU must provide a number of mechanisms to promote forward +progress. + +<p> +These mechanisms are not foolproof, nor can they be. +For one simple example, an infinite loop in an RCU read-side critical +section must by definition prevent later grace periods from ever completing. +For a more involved example, consider a 64-CPU system built with +<tt>CONFIG_RCU_NOCB_CPU=y</tt> and booted with <tt>rcu_nocbs=1-63</tt>, +where CPUs 1 through 63 spin in tight loops that invoke +<tt>call_rcu()</tt>. +Even if these tight loops also contain calls to <tt>cond_resched()</tt> +(thus allowing grace periods to complete), CPU 0 simply will +not be able to invoke callbacks as fast as the other 63 CPUs can +register them, at least not until the system runs out of memory. +In both of these examples, the Spiderman principle applies: With great +power comes great responsibility. +However, short of this level of abuse, RCU is required to +ensure timely completion of grace periods and timely invocation of +callbacks. + +<p> +RCU takes the following steps to encourage timely completion of +grace periods: + +<ol> +<li> If a grace period fails to complete within 100 milliseconds, + RCU causes future invocations of <tt>cond_resched()</tt> on + the holdout CPUs to provide an RCU quiescent state. + RCU also causes those CPUs' <tt>need_resched()</tt> invocations + to return <tt>true</tt>, but only after the corresponding CPU's + next scheduling-clock. +<li> CPUs mentioned in the <tt>nohz_full</tt> kernel boot parameter + can run indefinitely in the kernel without scheduling-clock + interrupts, which defeats the above <tt>need_resched()</tt> + strategem. + RCU will therefore invoke <tt>resched_cpu()</tt> on any + <tt>nohz_full</tt> CPUs still holding out after + 109 milliseconds. +<li> In kernels built with <tt>CONFIG_RCU_BOOST=y</tt>, if a given + task that has been preempted within an RCU read-side critical + section is holding out for more than 500 milliseconds, + RCU will resort to priority boosting. +<li> If a CPU is still holding out 10 seconds into the grace + period, RCU will invoke <tt>resched_cpu()</tt> on it regardless + of its <tt>nohz_full</tt> state. +</ol> + +<p> +The above values are defaults for systems running with <tt>HZ=1000</tt>. +They will vary as the value of <tt>HZ</tt> varies, and can also be +changed using the relevant Kconfig options and kernel boot parameters. +RCU currently does not do much sanity checking of these +parameters, so please use caution when changing them. +Note that these forward-progress measures are provided only for RCU, +not for +<a href="#Sleepable RCU">SRCU</a> or +<a href="#Tasks RCU">Tasks RCU</a>. + +<p> +RCU takes the following steps in <tt>call_rcu()</tt> to encourage timely +invocation of callbacks when any given non-<tt>rcu_nocbs</tt> CPU has +10,000 callbacks, or has 10,000 more callbacks than it had the last time +encouragement was provided: + +<ol> +<li> Starts a grace period, if one is not already in progress. +<li> Forces immediate checking for quiescent states, rather than + waiting for three milliseconds to have elapsed since the + beginning of the grace period. +<li> Immediately tags the CPU's callbacks with their grace period + completion numbers, rather than waiting for the <tt>RCU_SOFTIRQ</tt> + handler to get around to it. +<li> Lifts callback-execution batch limits, which speeds up callback + invocation at the expense of degrading realtime response. +</ol> + +<p> +Again, these are default values when running at <tt>HZ=1000</tt>, +and can be overridden. +Again, these forward-progress measures are provided only for RCU, +not for +<a href="#Sleepable RCU">SRCU</a> or +<a href="#Tasks RCU">Tasks RCU</a>. +Even for RCU, callback-invocation forward progress for <tt>rcu_nocbs</tt> +CPUs is much less well-developed, in part because workloads benefiting +from <tt>rcu_nocbs</tt> CPUs tend to invoke <tt>call_rcu()</tt> +relatively infrequently. +If workloads emerge that need both <tt>rcu_nocbs</tt> CPUs and high +<tt>call_rcu()</tt> invocation rates, then additional forward-progress +work will be required. + <h3><a name="Composability">Composability</a></h3> <p> @@ -2272,7 +2323,7 @@ that meets this requirement. Furthermore, NMI handlers can be interrupted by what appear to RCU to be normal interrupts. One way that this can happen is for code that directly invokes -<tt>rcu_irq_enter()</tt> and </tt>rcu_irq_exit()</tt> to be called +<tt>rcu_irq_enter()</tt> and <tt>rcu_irq_exit()</tt> to be called from an NMI handler. This astonishing fact of life prompted the current code structure, which has <tt>rcu_irq_enter()</tt> invoking <tt>rcu_nmi_enter()</tt> @@ -2294,7 +2345,7 @@ via <tt>del_timer_sync()</tt> or similar. <p> Unfortunately, there is no way to cancel an RCU callback; once you invoke <tt>call_rcu()</tt>, the callback function is -going to eventually be invoked, unless the system goes down first. +eventually going to be invoked, unless the system goes down first. Because it is normally considered socially irresponsible to crash the system in response to a module unload request, we need some other way to deal with in-flight RCU callbacks. @@ -2424,23 +2475,37 @@ for context-switch-heavy <tt>CONFIG_NO_HZ_FULL=y</tt> workloads, but there is room for further improvement. <p> -In the past, it was forbidden to disable interrupts across an -<tt>rcu_read_unlock()</tt> unless that interrupt-disabled region -of code also included the matching <tt>rcu_read_lock()</tt>. -Violating this restriction could result in deadlocks involving the -scheduler's runqueue and priority-inheritance spinlocks. -This restriction was lifted when interrupt-disabled calls to -<tt>rcu_read_unlock()</tt> started deferring the reporting of -the resulting RCU-preempt quiescent state until the end of that +It is forbidden to hold any of scheduler's runqueue or priority-inheritance +spinlocks across an <tt>rcu_read_unlock()</tt> unless interrupts have been +disabled across the entire RCU read-side critical section, that is, +up to and including the matching <tt>rcu_read_lock()</tt>. +Violating this restriction can result in deadlocks involving these +scheduler spinlocks. +There was hope that this restriction might be lifted when interrupt-disabled +calls to <tt>rcu_read_unlock()</tt> started deferring the reporting of +the resulting RCU-preempt quiescent state until the end of the corresponding interrupts-disabled region. -This deferred reporting means that the scheduler's runqueue and -priority-inheritance locks cannot be held while reporting an RCU-preempt -quiescent state, which lifts the earlier restriction, at least from -a deadlock perspective. -Unfortunately, real-time systems using RCU priority boosting may +Unfortunately, timely reporting of the corresponding quiescent state +to expedited grace periods requires a call to <tt>raise_softirq()</tt>, +which can acquire these scheduler spinlocks. +In addition, real-time systems using RCU priority boosting need this restriction to remain in effect because deferred -quiescent-state reporting also defers deboosting, which in turn -degrades real-time latencies. +quiescent-state reporting would also defer deboosting, which in turn +would degrade real-time latencies. + +<p> +In theory, if a given RCU read-side critical section could be +guaranteed to be less than one second in duration, holding a scheduler +spinlock across that critical section's <tt>rcu_read_unlock()</tt> +would require only that preemption be disabled across the entire +RCU read-side critical section, not interrupts. +Unfortunately, given the possibility of vCPU preemption, long-running +interrupts, and so on, it is not possible in practice to guarantee +that a given RCU read-side critical section will complete in less than +one second. +Therefore, as noted above, if scheduler spinlocks are held across +a given call to <tt>rcu_read_unlock()</tt>, interrupts must be +disabled across the entire RCU read-side critical section. <h3><a name="Tracing and RCU">Tracing and RCU</a></h3> @@ -3233,6 +3298,11 @@ For example, RCU callback overhead might be charged back to the originating <tt>call_rcu()</tt> instance, though probably not in production kernels. +<p> +Additional work may be required to provide reasonable forward-progress +guarantees under heavy load for grace periods and for callback +invocation. + <h2><a name="Summary">Summary</a></h2> <p> diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 49747717d905..6f469864d9f5 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -63,7 +63,7 @@ over a rather long period of time, but improvements are always welcome! pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(), rcu_read_lock_sched(), or by the appropriate update-side lock. Disabling of preemption can serve as rcu_read_lock_sched(), but - is less readable. + is less readable and prevents lockdep from detecting locking issues. Letting RCU-protected pointers "leak" out of an RCU read-side critical section is every bid as bad as letting them leak out @@ -285,11 +285,7 @@ over a rather long period of time, but improvements are always welcome! here is that superuser already has lots of ways to crash the machine. - d. Use call_rcu_bh() rather than call_rcu(), in order to take - advantage of call_rcu_bh()'s faster grace periods. (This - is only a partial solution, though.) - - e. Periodically invoke synchronize_rcu(), permitting a limited + d. Periodically invoke synchronize_rcu(), permitting a limited number of updates per grace period. The same cautions apply to call_rcu_bh(), call_rcu_sched(), @@ -324,37 +320,14 @@ over a rather long period of time, but improvements are always welcome! will break Alpha, cause aggressive compilers to generate bad code, and confuse people trying to read your code. -11. Note that synchronize_rcu() -only- guarantees to wait until - all currently executing rcu_read_lock()-protected RCU read-side - critical sections complete. It does -not- necessarily guarantee - that all currently running interrupts, NMIs, preempt_disable() - code, or idle loops will complete. Therefore, if your - read-side critical sections are protected by something other - than rcu_read_lock(), do -not- use synchronize_rcu(). - - Similarly, disabling preemption is not an acceptable substitute - for rcu_read_lock(). Code that attempts to use preemption - disabling where it should be using rcu_read_lock() will break - in CONFIG_PREEMPT=y kernel builds. - - If you want to wait for interrupt handlers, NMI handlers, and - code under the influence of preempt_disable(), you instead - need to use synchronize_irq() or synchronize_sched(). - - This same limitation also applies to synchronize_rcu_bh() - and synchronize_srcu(), as well as to the asynchronous and - expedited forms of the three primitives, namely call_rcu(), - call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(), - synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited(). - -12. Any lock acquired by an RCU callback must be acquired elsewhere +11. Any lock acquired by an RCU callback must be acquired elsewhere with softirq disabled, e.g., via spin_lock_irqsave(), spin_lock_bh(), etc. Failing to disable irq on a given acquisition of that lock will result in deadlock as soon as the RCU softirq handler happens to run your RCU callback while interrupting that acquisition's critical section. -13. RCU callbacks can be and are executed in parallel. In many cases, +12. RCU callbacks can be and are executed in parallel. In many cases, the callback code simply wrappers around kfree(), so that this is not an issue (or, more accurately, to the extent that it is an issue, the memory-allocator locking handles it). However, @@ -370,7 +343,7 @@ over a rather long period of time, but improvements are always welcome! not the case, a self-spawning RCU callback would prevent the victim CPU from ever going offline.) -14. Unlike other forms of RCU, it -is- permissible to block in an +13. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical section (demarked by srcu_read_lock() and srcu_read_unlock()), hence the "SRCU": "sleepable RCU". Please note that if you don't need to sleep in read-side critical @@ -414,7 +387,7 @@ over a rather long period of time, but improvements are always welcome! Note that rcu_dereference() and rcu_assign_pointer() relate to SRCU just as they do to other forms of RCU. -15. The whole point of call_rcu(), synchronize_rcu(), and friends +14. The whole point of call_rcu(), synchronize_rcu(), and friends is to wait until all pre-existing readers have finished before carrying out some otherwise-destructive operation. It is therefore critically important to -first- remove any path @@ -426,13 +399,13 @@ over a rather long period of time, but improvements are always welcome! is the caller's responsibility to guarantee that any subsequent readers will execute safely. -16. The various RCU read-side primitives do -not- necessarily contain +15. The various RCU read-side primitives do -not- necessarily contain memory barriers. You should therefore plan for the CPU and the compiler to freely reorder code into and out of RCU read-side critical sections. It is the responsibility of the RCU update-side primitives to deal with this. -17. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the +16. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the __rcu sparse checks to validate your RCU code. These can help find problems as follows: @@ -455,7 +428,7 @@ over a rather long period of time, but improvements are always welcome! These debugging aids can help you find problems that are otherwise extremely difficult to spot. -18. If you register a callback using call_rcu(), call_rcu_bh(), +17. If you register a callback using call_rcu(), call_rcu_bh(), call_rcu_sched(), or call_srcu(), and pass in a function defined within a loadable module, then it in necessary to wait for all pending callbacks to be invoked after the last invocation @@ -469,8 +442,8 @@ over a rather long period of time, but improvements are always welcome! You instead need to use one of the barrier functions: o call_rcu() -> rcu_barrier() - o call_rcu_bh() -> rcu_barrier_bh() - o call_rcu_sched() -> rcu_barrier_sched() + o call_rcu_bh() -> rcu_barrier() + o call_rcu_sched() -> rcu_barrier() o call_srcu() -> srcu_barrier() However, these barrier functions are absolutely -not- guaranteed diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 491043fd976f..073dbc12d1ea 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -176,9 +176,8 @@ causing stalls, and that the stall was affecting RCU-sched. This message will normally be followed by stack dumps for each CPU. Please note that PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that the tasks will be indicated by PID, for example, "P3421". It is even -possible for a rcu_preempt_state stall to be caused by both CPUs -and- -tasks, in which case the offending CPUs and tasks will all be called -out in the list. +possible for an rcu_state stall to be caused by both CPUs -and- tasks, +in which case the offending CPUs and tasks will all be called out in the list. CPU 2's "(3 GPs behind)" indicates that this CPU has not interacted with the RCU core for the past three grace periods. In contrast, CPU 16's "(0 @@ -206,7 +205,7 @@ handlers are no longer able to execute on this CPU. This can happen if the stalled CPU is spinning with interrupts are disabled, or, in -rt kernels, if a high-priority process is starving RCU's softirq handler. -The "fps=" shows the number of force-quiescent-state idle/offline +The "fqs=" shows the number of force-quiescent-state idle/offline detection passes that the grace-period kthread has made across this CPU since the last time that this CPU noted the beginning of a grace period. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 86d82f7f3500..4a6854318b17 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -266,7 +266,7 @@ rcu_dereference() unnecessary overhead on Alpha CPUs. Note that the value returned by rcu_dereference() is valid - only within the enclosing RCU read-side critical section. + only within the enclosing RCU read-side critical section [1]. For example, the following is -not- legal: rcu_read_lock(); @@ -292,6 +292,19 @@ rcu_dereference() typically used indirectly, via the _rcu list-manipulation primitives, such as list_for_each_entry_rcu(). + [1] The variant rcu_dereference_protected() can be used outside + of an RCU read-side critical section as long as the usage is + protected by locks acquired by the update-side code. This variant + avoids the lockdep warning that would happen when using (for + example) rcu_dereference() without rcu_read_lock() protection. + Using rcu_dereference_protected() also has the advantage + of permitting compiler optimizations that rcu_dereference() + must prohibit. The rcu_dereference_protected() variant takes + a lockdep expression to indicate which locks must be acquired + by the caller. If the indicated protection is not provided, + a lockdep splat is emitted. See RCU/Design/Requirements.html + and the API's code comments for more details and example usage. + The following diagram shows how each API communicates among the reader, updater, and reclaimer. @@ -322,28 +335,27 @@ to their callers and (2) call_rcu() callbacks may be invoked. Efficient implementations of the RCU infrastructure make heavy use of batching in order to amortize their overhead over many uses of the corresponding APIs. -There are no fewer than three RCU mechanisms in the Linux kernel; the -diagram above shows the first one, which is by far the most commonly used. -The rcu_dereference() and rcu_assign_pointer() primitives are used for -all three mechanisms, but different defer and protect primitives are -used as follows: - - Defer Protect +There are at least three flavors of RCU usage in the Linux kernel. The diagram +above shows the most common one. On the updater side, the rcu_assign_pointer(), +sychronize_rcu() and call_rcu() primitives used are the same for all three +flavors. However for protection (on the reader side), the primitives used vary +depending on the flavor: -a. synchronize_rcu() rcu_read_lock() / rcu_read_unlock() - call_rcu() rcu_dereference() +a. rcu_read_lock() / rcu_read_unlock() + rcu_dereference() -b. synchronize_rcu_bh() rcu_read_lock_bh() / rcu_read_unlock_bh() - call_rcu_bh() rcu_dereference_bh() +b. rcu_read_lock_bh() / rcu_read_unlock_bh() + local_bh_disable() / local_bh_enable() + rcu_dereference_bh() -c. synchronize_sched() rcu_read_lock_sched() / rcu_read_unlock_sched() - call_rcu_sched() preempt_disable() / preempt_enable() - local_irq_save() / local_irq_restore() - hardirq enter / hardirq exit - NMI enter / NMI exit - rcu_dereference_sched() +c. rcu_read_lock_sched() / rcu_read_unlock_sched() + preempt_disable() / preempt_enable() + local_irq_save() / local_irq_restore() + hardirq enter / hardirq exit + NMI enter / NMI exit + rcu_dereference_sched() -These three mechanisms are used as follows: +These three flavors are used as follows: a. RCU applied to normal data structures. @@ -867,18 +879,20 @@ RCU: Critical sections Grace period Barrier bh: Critical sections Grace period Barrier - rcu_read_lock_bh call_rcu_bh rcu_barrier_bh - rcu_read_unlock_bh synchronize_rcu_bh - rcu_dereference_bh synchronize_rcu_bh_expedited + rcu_read_lock_bh call_rcu rcu_barrier + rcu_read_unlock_bh synchronize_rcu + [local_bh_disable] synchronize_rcu_expedited + [and friends] + rcu_dereference_bh rcu_dereference_bh_check rcu_dereference_bh_protected rcu_read_lock_bh_held sched: Critical sections Grace period Barrier - rcu_read_lock_sched synchronize_sched rcu_barrier_sched - rcu_read_unlock_sched call_rcu_sched - [preempt_disable] synchronize_sched_expedited + rcu_read_lock_sched call_rcu rcu_barrier + rcu_read_unlock_sched synchronize_rcu + [preempt_disable] synchronize_rcu_expedited [and friends] rcu_read_lock_sched_notrace rcu_read_unlock_sched_notrace @@ -890,8 +904,8 @@ sched: Critical sections Grace period Barrier SRCU: Critical sections Grace period Barrier - srcu_read_lock synchronize_srcu srcu_barrier - srcu_read_unlock call_srcu + srcu_read_lock call_srcu srcu_barrier + srcu_read_unlock synchronize_srcu srcu_dereference synchronize_srcu_expedited srcu_dereference_check srcu_read_lock_held @@ -1034,7 +1048,7 @@ Answer: Just as PREEMPT_RT permits preemption of spinlock spinlocks blocking while in RCU read-side critical sections. - Why the apparent inconsistency? Because it is it + Why the apparent inconsistency? Because it is possible to use priority boosting to keep the RCU grace periods short if need be (for example, if running short of memory). In contrast, if blocking waiting diff --git a/Documentation/admin-guide/LSM/SELinux.rst b/Documentation/admin-guide/LSM/SELinux.rst index f722c9b4173a..520a1c2c6fd2 100644 --- a/Documentation/admin-guide/LSM/SELinux.rst +++ b/Documentation/admin-guide/LSM/SELinux.rst @@ -6,7 +6,7 @@ If you want to use SELinux, chances are you will want to use the distro-provided policies, or install the latest reference policy release from - http://oss.tresys.com/projects/refpolicy + https://github.com/SELinuxProject/refpolicy However, if you want to install a dummy policy for testing, you can do using ``mdp`` provided under diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 07e06136a550..7bf3f129c68b 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -2051,8 +2051,10 @@ following two functions. wbc_init_bio(@wbc, @bio) Should be called for each bio carrying writeback data and - associates the bio with the inode's owner cgroup. Can be - called anytime between bio allocation and submission. + associates the bio with the inode's owner cgroup and the + corresponding request queue. This must be called after + a queue (device) has been associated with the bio and + before submission. wbc_account_io(@wbc, @page, @bytes) Should be called for each data segment being written out. @@ -2071,7 +2073,7 @@ the configuration, the bio may be executed at a lower priority and if the writeback session is holding shared resources, e.g. a journal entry, may lead to priority inversion. There is no one easy solution for the problem. Filesystems can try to work around specific problem -cases by skipping wbc_init_bio() or using bio_associate_blkcg() +cases by skipping wbc_init_bio() and using bio_associate_blkg() directly. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8b7652449228..b7c9040f547e 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -678,6 +678,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpuidle.governor= + [CPU_IDLE] Name of the cpuidle governor to use. + cpufreq.off=1 [CPU_FREQ] disable the cpufreq sub-system @@ -860,7 +863,8 @@ causing system reset or hang due to sending INIT from AP to BSP. - disable_counter_freezing [HW] + perf_v4_pmi= [X86,INTEL] + Format: <bool> Disable Intel PMU counter freezing feature. The feature only exists starting from Arch Perfmon v4 (Skylake and newer). @@ -2099,6 +2103,9 @@ off Disables hypervisor mitigations and doesn't emit any warnings. + It also drops the swap size and available + RAM limit restriction on both hypervisor and + bare metal. Default is 'flush'. @@ -2830,7 +2837,7 @@ check bypass). With this option data leaks are possible in the system. - nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2 + nospectre_v2 [X86,PPC_FSL_BOOK3E] Disable all mitigations for the Spectre variant 2 (indirect branch prediction) vulnerability. System may allow data leaks with this option, which is equivalent to spectre_v2=off. @@ -3508,6 +3515,10 @@ before loading. See Documentation/blockdev/ramdisk.txt. + psi= [KNL] Enable or disable pressure stall information + tracking. + Format: <bool> + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports @@ -3747,24 +3758,6 @@ in microseconds. The default of zero says no holdoff. - rcutorture.cbflood_inter_holdoff= [KNL] - Set holdoff time (jiffies) between successive - callback-flood tests. - - rcutorture.cbflood_intra_holdoff= [KNL] - Set holdoff time (jiffies) between successive - bursts of callbacks within a given callback-flood - test. - - rcutorture.cbflood_n_burst= [KNL] - Set the number of bursts making up a given - callback-flood test. Set this to zero to - disable callback-flood testing. - - rcutorture.cbflood_n_per_burst= [KNL] - Set the number of callbacks to be registered - in a given burst of a callback-flood test. - rcutorture.fqs_duration= [KNL] Set duration of force_quiescent_state bursts in microseconds. @@ -3777,6 +3770,23 @@ Set wait time between force_quiescent_state bursts in seconds. + rcutorture.fwd_progress= [KNL] + Enable RCU grace-period forward-progress testing + for the types of RCU supporting this notion. + + rcutorture.fwd_progress_div= [KNL] + Specify the fraction of a CPU-stall-warning + period to do tight-loop forward-progress testing. + + rcutorture.fwd_progress_holdoff= [KNL] + Number of seconds to wait between successive + forward-progress tests. + + rcutorture.fwd_progress_need_resched= [KNL] + Enclose cond_resched() calls within checks for + need_resched() during tight-loop forward-progress + testing. + rcutorture.gp_cond= [KNL] Use conditional/asynchronous update-side primitives, if available. @@ -4198,9 +4208,13 @@ spectre_v2= [X86] Control mitigation of Spectre variant 2 (indirect branch speculation) vulnerability. + The default operation protects the kernel from + user space attacks. - on - unconditionally enable - off - unconditionally disable + on - unconditionally enable, implies + spectre_v2_user=on + off - unconditionally disable, implies + spectre_v2_user=off auto - kernel detects whether your CPU model is vulnerable @@ -4210,6 +4224,12 @@ CONFIG_RETPOLINE configuration option, and the compiler with which the kernel was built. + Selecting 'on' will also enable the mitigation + against user space to user space task attacks. + + Selecting 'off' will disable both the kernel and + the user space protections. + Specific mitigations can also be selected manually: retpoline - replace indirect branches @@ -4219,6 +4239,48 @@ Not specifying this option is equivalent to spectre_v2=auto. + spectre_v2_user= + [X86] Control mitigation of Spectre variant 2 + (indirect branch speculation) vulnerability between + user space tasks + + on - Unconditionally enable mitigations. Is + enforced by spectre_v2=on + + off - Unconditionally disable mitigations. Is + enforced by spectre_v2=off + + prctl - Indirect branch speculation is enabled, + but mitigation can be enabled via prctl + per thread. The mitigation control state + is inherited on fork. + + prctl,ibpb + - Like "prctl" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different user + space processes. + + seccomp + - Same as "prctl" above, but all seccomp + threads will enable the mitigation unless + they explicitly opt out. + + seccomp,ibpb + - Like "seccomp" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different + user space processes. + + auto - Kernel selects the mitigation depending on + the available CPU features and vulnerability. + + Default mitigation: + If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl" + + Not specifying this option is equivalent to + spectre_v2_user=auto. + spec_store_bypass_disable= [HW] Control Speculative Store Bypass (SSB) Disable mitigation (Speculative Store Bypass vulnerability) @@ -4717,6 +4779,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/Documentation/admin-guide/l1tf.rst b/Documentation/admin-guide/l1tf.rst index b85dd80510b0..9af977384168 100644 --- a/Documentation/admin-guide/l1tf.rst +++ b/Documentation/admin-guide/l1tf.rst @@ -405,6 +405,9 @@ time with the option "l1tf=". The valid arguments for this option are: off Disables hypervisor mitigations and doesn't emit any warnings. + It also drops the swap size and available RAM limit restrictions + on both hypervisor and bare metal. + ============ ============================================================= The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`. @@ -576,7 +579,8 @@ Default mitigations The kernel default mitigations for vulnerable processors are: - PTE inversion to protect against malicious user space. This is done - unconditionally and cannot be controlled. + unconditionally and cannot be controlled. The swap storage is limited + to ~16TB. - L1D conditional flushing on VMENTER when EPT is enabled for a guest. diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst new file mode 100644 index 000000000000..106379e2619f --- /dev/null +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -0,0 +1,631 @@ +.. |struct cpuidle_state| replace:: :c:type:`struct cpuidle_state <cpuidle_state>` +.. |cpufreq| replace:: :doc:`CPU Performance Scaling <cpufreq>` + +======================== +CPU Idle Time Management +======================== + +:: + + Copyright (c) 2018 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +Concepts +======== + +Modern processors are generally able to enter states in which the execution of +a program is suspended and instructions belonging to it are not fetched from +memory or executed. Those states are the *idle* states of the processor. + +Since part of the processor hardware is not used in idle states, entering them +generally allows power drawn by the processor to be reduced and, in consequence, +it is an opportunity to save energy. + +CPU idle time management is an energy-efficiency feature concerned about using +the idle states of processors for this purpose. + +Logical CPUs +------------ + +CPU idle time management operates on CPUs as seen by the *CPU scheduler* (that +is the part of the kernel responsible for the distribution of computational +work in the system). In its view, CPUs are *logical* units. That is, they need +not be separate physical entities and may just be interfaces appearing to +software as individual single-core processors. In other words, a CPU is an +entity which appears to be fetching instructions that belong to one sequence +(program) from memory and executing them, but it need not work this way +physically. Generally, three different cases can be consider here. + +First, if the whole processor can only follow one sequence of instructions (one +program) at a time, it is a CPU. In that case, if the hardware is asked to +enter an idle state, that applies to the processor as a whole. + +Second, if the processor is multi-core, each core in it is able to follow at +least one program at a time. The cores need not be entirely independent of each +other (for example, they may share caches), but still most of the time they +work physically in parallel with each other, so if each of them executes only +one program, those programs run mostly independently of each other at the same +time. The entire cores are CPUs in that case and if the hardware is asked to +enter an idle state, that applies to the core that asked for it in the first +place, but it also may apply to a larger unit (say a "package" or a "cluster") +that the core belongs to (in fact, it may apply to an entire hierarchy of larger +units containing the core). Namely, if all of the cores in the larger unit +except for one have been put into idle states at the "core level" and the +remaining core asks the processor to enter an idle state, that may trigger it +to put the whole larger unit into an idle state which also will affect the +other cores in that unit. + +Finally, each core in a multi-core processor may be able to follow more than one +program in the same time frame (that is, each core may be able to fetch +instructions from multiple locations in memory and execute them in the same time +frame, but not necessarily entirely in parallel with each other). In that case +the cores present themselves to software as "bundles" each consisting of +multiple individual single-core "processors", referred to as *hardware threads* +(or hyper-threads specifically on Intel hardware), that each can follow one +sequence of instructions. Then, the hardware threads are CPUs from the CPU idle +time management perspective and if the processor is asked to enter an idle state +by one of them, the hardware thread (or CPU) that asked for it is stopped, but +nothing more happens, unless all of the other hardware threads within the same +core also have asked the processor to enter an idle state. In that situation, +the core may be put into an idle state individually or a larger unit containing +it may be put into an idle state as a whole (if the other cores within the +larger unit are in idle states already). + +Idle CPUs +--------- + +Logical CPUs, simply referred to as "CPUs" in what follows, are regarded as +*idle* by the Linux kernel when there are no tasks to run on them except for the +special "idle" task. + +Tasks are the CPU scheduler's representation of work. Each task consists of a +sequence of instructions to execute, or code, data to be manipulated while +running that code, and some context information that needs to be loaded into the +processor every time the task's code is run by a CPU. The CPU scheduler +distributes work by assigning tasks to run to the CPUs present in the system. + +Tasks can be in various states. In particular, they are *runnable* if there are +no specific conditions preventing their code from being run by a CPU as long as +there is a CPU available for that (for example, they are not waiting for any +events to occur or similar). When a task becomes runnable, the CPU scheduler +assigns it to one of the available CPUs to run and if there are no more runnable +tasks assigned to it, the CPU will load the given task's context and run its +code (from the instruction following the last one executed so far, possibly by +another CPU). [If there are multiple runnable tasks assigned to one CPU +simultaneously, they will be subject to prioritization and time sharing in order +to allow them to make some progress over time.] + +The special "idle" task becomes runnable if there are no other runnable tasks +assigned to the given CPU and the CPU is then regarded as idle. In other words, +in Linux idle CPUs run the code of the "idle" task called *the idle loop*. That +code may cause the processor to be put into one of its idle states, if they are +supported, in order to save energy, but if the processor does not support any +idle states, or there is not enough time to spend in an idle state before the +next wakeup event, or there are strict latency constraints preventing any of the +available idle states from being used, the CPU will simply execute more or less +useless instructions in a loop until it is assigned a new task to run. + + +.. _idle-loop: + +The Idle Loop +============= + +The idle loop code takes two major steps in every iteration of it. First, it +calls into a code module referred to as the *governor* that belongs to the CPU +idle time management subsystem called ``CPUIdle`` to select an idle state for +the CPU to ask the hardware to enter. Second, it invokes another code module +from the ``CPUIdle`` subsystem, called the *driver*, to actually ask the +processor hardware to enter the idle state selected by the governor. + +The role of the governor is to find an idle state most suitable for the +conditions at hand. For this purpose, idle states that the hardware can be +asked to enter by logical CPUs are represented in an abstract way independent of +the platform or the processor architecture and organized in a one-dimensional +(linear) array. That array has to be prepared and supplied by the ``CPUIdle`` +driver matching the platform the kernel is running on at the initialization +time. This allows ``CPUIdle`` governors to be independent of the underlying +hardware and to work with any platforms that the Linux kernel can run on. + +Each idle state present in that array is characterized by two parameters to be +taken into account by the governor, the *target residency* and the (worst-case) +*exit latency*. The target residency is the minimum time the hardware must +spend in the given state, including the time needed to enter it (which may be +substantial), in order to save more energy than it would save by entering one of +the shallower idle states instead. [The "depth" of an idle state roughly +corresponds to the power drawn by the processor in that state.] The exit +latency, in turn, is the maximum time it will take a CPU asking the processor +hardware to enter an idle state to start executing the first instruction after a +wakeup from that state. Note that in general the exit latency also must cover +the time needed to enter the given state in case the wakeup occurs when the +hardware is entering it and it must be entered completely to be exited in an +ordered manner. + +There are two types of information that can influence the governor's decisions. +First of all, the governor knows the time until the closest timer event. That +time is known exactly, because the kernel programs timers and it knows exactly +when they will trigger, and it is the maximum time the hardware that the given +CPU depends on can spend in an idle state, including the time necessary to enter +and exit it. However, the CPU may be woken up by a non-timer event at any time +(in particular, before the closest timer triggers) and it generally is not known +when that may happen. The governor can only see how much time the CPU actually +was idle after it has been woken up (that time will be referred to as the *idle +duration* from now on) and it can use that information somehow along with the +time until the closest timer to estimate the idle duration in future. How the +governor uses that information depends on what algorithm is implemented by it +and that is the primary reason for having more than one governor in the +``CPUIdle`` subsystem. + +There are two ``CPUIdle`` governors available, ``menu`` and ``ladder``. Which +of them is used depends on the configuration of the kernel and in particular on +whether or not the scheduler tick can be `stopped by the idle +loop <idle-cpus-and-tick_>`_. It is possible to change the governor at run time +if the ``cpuidle_sysfs_switch`` command line parameter has been passed to the +kernel, but that is not safe in general, so it should not be done on production +systems (that may change in the future, though). The name of the ``CPUIdle`` +governor currently used by the kernel can be read from the +:file:`current_governor_ro` (or :file:`current_governor` if +``cpuidle_sysfs_switch`` is present in the kernel command line) file under +:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + +Which ``CPUIdle`` driver is used, on the other hand, usually depends on the +platform the kernel is running on, but there are platforms with more than one +matching driver. For example, there are two drivers that can work with the +majority of Intel platforms, ``intel_idle`` and ``acpi_idle``, one with +hardcoded idle states information and the other able to read that information +from the system's ACPI tables, respectively. Still, even in those cases, the +driver chosen at the system initialization time cannot be replaced later, so the +decision on which one of them to use has to be made early (on Intel platforms +the ``acpi_idle`` driver will be used if ``intel_idle`` is disabled for some +reason or if it does not recognize the processor). The name of the ``CPUIdle`` +driver currently used by the kernel can be read from the :file:`current_driver` +file under :file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + + +.. _idle-cpus-and-tick: + +Idle CPUs and The Scheduler Tick +================================ + +The scheduler tick is a timer that triggers periodically in order to implement +the time sharing strategy of the CPU scheduler. Of course, if there are +multiple runnable tasks assigned to one CPU at the same time, the only way to +allow them to make reasonable progress in a given time frame is to make them +share the available CPU time. Namely, in rough approximation, each task is +given a slice of the CPU time to run its code, subject to the scheduling class, +prioritization and so on and when that time slice is used up, the CPU should be +switched over to running (the code of) another task. The currently running task +may not want to give the CPU away voluntarily, however, and the scheduler tick +is there to make the switch happen regardless. That is not the only role of the +tick, but it is the primary reason for using it. + +The scheduler tick is problematic from the CPU idle time management perspective, +because it triggers periodically and relatively often (depending on the kernel +configuration, the length of the tick period is between 1 ms and 10 ms). +Thus, if the tick is allowed to trigger on idle CPUs, it will not make sense +for them to ask the hardware to enter idle states with target residencies above +the tick period length. Moreover, in that case the idle duration of any CPU +will never exceed the tick period length and the energy used for entering and +exiting idle states due to the tick wakeups on idle CPUs will be wasted. + +Fortunately, it is not really necessary to allow the tick to trigger on idle +CPUs, because (by definition) they have no tasks to run except for the special +"idle" one. In other words, from the CPU scheduler perspective, the only user +of the CPU time on them is the idle loop. Since the time of an idle CPU need +not be shared between multiple runnable tasks, the primary reason for using the +tick goes away if the given CPU is idle. Consequently, it is possible to stop +the scheduler tick entirely on idle CPUs in principle, even though that may not +always be worth the effort. + +Whether or not it makes sense to stop the scheduler tick in the idle loop +depends on what is expected by the governor. First, if there is another +(non-tick) timer due to trigger within the tick range, stopping the tick clearly +would be a waste of time, even though the timer hardware may not need to be +reprogrammed in that case. Second, if the governor is expecting a non-timer +wakeup within the tick range, stopping the tick is not necessary and it may even +be harmful. Namely, in that case the governor will select an idle state with +the target residency within the time until the expected wakeup, so that state is +going to be relatively shallow. The governor really cannot select a deep idle +state then, as that would contradict its own expectation of a wakeup in short +order. Now, if the wakeup really occurs shortly, stopping the tick would be a +waste of time and in this case the timer hardware would need to be reprogrammed, +which is expensive. On the other hand, if the tick is stopped and the wakeup +does not occur any time soon, the hardware may spend indefinite amount of time +in the shallow idle state selected by the governor, which will be a waste of +energy. Hence, if the governor is expecting a wakeup of any kind within the +tick range, it is better to allow the tick trigger. Otherwise, however, the +governor will select a relatively deep idle state, so the tick should be stopped +so that it does not wake up the CPU too early. + +In any case, the governor knows what it is expecting and the decision on whether +or not to stop the scheduler tick belongs to it. Still, if the tick has been +stopped already (in one of the previous iterations of the loop), it is better +to leave it as is and the governor needs to take that into account. + +The kernel can be configured to disable stopping the scheduler tick in the idle +loop altogether. That can be done through the build-time configuration of it +(by unsetting the ``CONFIG_NO_HZ_IDLE`` configuration option) or by passing +``nohz=off`` to it in the command line. In both cases, as the stopping of the +scheduler tick is disabled, the governor's decisions regarding it are simply +ignored by the idle loop code and the tick is never stopped. + +The systems that run kernels configured to allow the scheduler tick to be +stopped on idle CPUs are referred to as *tickless* systems and they are +generally regarded as more energy-efficient than the systems running kernels in +which the tick cannot be stopped. If the given system is tickless, it will use +the ``menu`` governor by default and if it is not tickless, the default +``CPUIdle`` governor on it will be ``ladder``. + + +The ``menu`` Governor +===================== + +The ``menu`` governor is the default ``CPUIdle`` governor for tickless systems. +It is quite complex, but the basic principle of its design is straightforward. +Namely, when invoked to select an idle state for a CPU (i.e. an idle state that +the CPU will ask the processor hardware to enter), it attempts to predict the +idle duration and uses the predicted value for idle state selection. + +It first obtains the time until the closest timer event with the assumption +that the scheduler tick will be stopped. That time, referred to as the *sleep +length* in what follows, is the upper bound on the time before the next CPU +wakeup. It is used to determine the sleep length range, which in turn is needed +to get the sleep length correction factor. + +The ``menu`` governor maintains two arrays of sleep length correction factors. +One of them is used when tasks previously running on the given CPU are waiting +for some I/O operations to complete and the other one is used when that is not +the case. Each array contains several correction factor values that correspond +to different sleep length ranges organized so that each range represented in the +array is approximately 10 times wider than the previous one. + +The correction factor for the given sleep length range (determined before +selecting the idle state for the CPU) is updated after the CPU has been woken +up and the closer the sleep length is to the observed idle duration, the closer +to 1 the correction factor becomes (it must fall between 0 and 1 inclusive). +The sleep length is multiplied by the correction factor for the range that it +falls into to obtain the first approximation of the predicted idle duration. + +Next, the governor uses a simple pattern recognition algorithm to refine its +idle duration prediction. Namely, it saves the last 8 observed idle duration +values and, when predicting the idle duration next time, it computes the average +and variance of them. If the variance is small (smaller than 400 square +milliseconds) or it is small relative to the average (the average is greater +that 6 times the standard deviation), the average is regarded as the "typical +interval" value. Otherwise, the longest of the saved observed idle duration +values is discarded and the computation is repeated for the remaining ones. +Again, if the variance of them is small (in the above sense), the average is +taken as the "typical interval" value and so on, until either the "typical +interval" is determined or too many data points are disregarded, in which case +the "typical interval" is assumed to equal "infinity" (the maximum unsigned +integer value). The "typical interval" computed this way is compared with the +sleep length multiplied by the correction factor and the minimum of the two is +taken as the predicted idle duration. + +Then, the governor computes an extra latency limit to help "interactive" +workloads. It uses the observation that if the exit latency of the selected +idle state is comparable with the predicted idle duration, the total time spent +in that state probably will be very short and the amount of energy to save by +entering it will be relatively small, so likely it is better to avoid the +overhead related to entering that state and exiting it. Thus selecting a +shallower state is likely to be a better option then. The first approximation +of the extra latency limit is the predicted idle duration itself which +additionally is divided by a value depending on the number of tasks that +previously ran on the given CPU and now they are waiting for I/O operations to +complete. The result of that division is compared with the latency limit coming +from the power management quality of service, or `PM QoS <cpu-pm-qos_>`_, +framework and the minimum of the two is taken as the limit for the idle states' +exit latency. + +Now, the governor is ready to walk the list of idle states and choose one of +them. For this purpose, it compares the target residency of each state with +the predicted idle duration and the exit latency of it with the computed latency +limit. It selects the state with the target residency closest to the predicted +idle duration, but still below it, and exit latency that does not exceed the +limit. + +In the final step the governor may still need to refine the idle state selection +if it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That +happens if the idle duration predicted by it is less than the tick period and +the tick has not been stopped already (in a previous iteration of the idle +loop). Then, the sleep length used in the previous computations may not reflect +the real time until the closest timer event and if it really is greater than +that time, the governor may need to select a shallower state with a suitable +target residency. + + +.. _idle-states-representation: + +Representation of Idle States +============================= + +For the CPU idle time management purposes all of the physical idle states +supported by the processor have to be represented as a one-dimensional array of +|struct cpuidle_state| objects each allowing an individual (logical) CPU to ask +the processor hardware to enter an idle state of certain properties. If there +is a hierarchy of units in the processor, one |struct cpuidle_state| object can +cover a combination of idle states supported by the units at different levels of +the hierarchy. In that case, the `target residency and exit latency parameters +of it <idle-loop_>`_, must reflect the properties of the idle state at the +deepest level (i.e. the idle state of the unit containing all of the other +units). + +For example, take a processor with two cores in a larger unit referred to as +a "module" and suppose that asking the hardware to enter a specific idle state +(say "X") at the "core" level by one core will trigger the module to try to +enter a specific idle state of its own (say "MX") if the other core is in idle +state "X" already. In other words, asking for idle state "X" at the "core" +level gives the hardware a license to go as deep as to idle state "MX" at the +"module" level, but there is no guarantee that this is going to happen (the core +asking for idle state "X" may just end up in that state by itself instead). +Then, the target residency of the |struct cpuidle_state| object representing +idle state "X" must reflect the minimum time to spend in idle state "MX" of +the module (including the time needed to enter it), because that is the minimum +time the CPU needs to be idle to save any energy in case the hardware enters +that state. Analogously, the exit latency parameter of that object must cover +the exit time of idle state "MX" of the module (and usually its entry time too), +because that is the maximum delay between a wakeup signal and the time the CPU +will start to execute the first new instruction (assuming that both cores in the +module will always be ready to execute instructions as soon as the module +becomes operational as a whole). + +There are processors without direct coordination between different levels of the +hierarchy of units inside them, however. In those cases asking for an idle +state at the "core" level does not automatically affect the "module" level, for +example, in any way and the ``CPUIdle`` driver is responsible for the entire +handling of the hierarchy. Then, the definition of the idle state objects is +entirely up to the driver, but still the physical properties of the idle state +that the processor hardware finally goes into must always follow the parameters +used by the governor for idle state selection (for instance, the actual exit +latency of that idle state must not exceed the exit latency parameter of the +idle state object selected by the governor). + +In addition to the target residency and exit latency idle state parameters +discussed above, the objects representing idle states each contain a few other +parameters describing the idle state and a pointer to the function to run in +order to ask the hardware to enter that state. Also, for each +|struct cpuidle_state| object, there is a corresponding +:c:type:`struct cpuidle_state_usage <cpuidle_state_usage>` one containing usage +statistics of the given idle state. That information is exposed by the kernel +via ``sysfs``. + +For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/` +directory in ``sysfs``, where the number ``<N>`` is assigned to the given +CPU at the initialization time. That directory contains a set of subdirectories +called :file:`state0`, :file:`state1` and so on, up to the number of idle state +objects defined for the given CPU minus one. Each of these directories +corresponds to one idle state object and the larger the number in its name, the +deeper the (effective) idle state represented by it. Each of them contains +a number of files (attributes) representing the properties of the idle state +object corresponding to it, as follows: + +``above`` + Total number of times this idle state had been asked for, but the + observed idle duration was certainly too short to match its target + residency. + +``below`` + Total number of times this idle state had been asked for, but cerainly + a deeper idle state would have been a better match for the observed idle + duration. + +``desc`` + Description of the idle state. + +``disable`` + Whether or not this idle state is disabled. + +``latency`` + Exit latency of the idle state in microseconds. + +``name`` + Name of the idle state. + +``power`` + Power drawn by hardware in this idle state in milliwatts (if specified, + 0 otherwise). + +``residency`` + Target residency of the idle state in microseconds. + +``time`` + Total time spent in this idle state by the given CPU (as measured by the + kernel) in microseconds. + +``usage`` + Total number of times the hardware has been asked by the given CPU to + enter this idle state. + +The :file:`desc` and :file:`name` files both contain strings. The difference +between them is that the name is expected to be more concise, while the +description may be longer and it may contain white space or special characters. +The other files listed above contain integer numbers. + +The :file:`disable` attribute is the only writeable one. If it contains 1, the +given idle state is disabled for this particular CPU, which means that the +governor will never select it for this particular CPU and the ``CPUIdle`` +driver will never ask the hardware to enter it for that CPU as a result. +However, disabling an idle state for one CPU does not prevent it from being +asked for by the other CPUs, so it must be disabled for all of them in order to +never be asked for by any of them. [Note that, due to the way the ``ladder`` +governor is implemented, disabling an idle state prevents that governor from +selecting any idle states deeper than the disabled one too.] + +If the :file:`disable` attribute contains 0, the given idle state is enabled for +this particular CPU, but it still may be disabled for some or all of the other +CPUs in the system at the same time. Writing 1 to it causes the idle state to +be disabled for this particular CPU and writing 0 to it allows the governor to +take it into consideration for the given CPU and the driver to ask for it, +unless that state was disabled globally in the driver (in which case it cannot +be used at all). + +The :file:`power` attribute is not defined very well, especially for idle state +objects representing combinations of idle states at different levels of the +hierarchy of units in the processor, and it generally is hard to obtain idle +state power numbers for complex hardware, so :file:`power` often contains 0 (not +available) and if it contains a nonzero number, that number may not be very +accurate and it should not be relied on for anything meaningful. + +The number in the :file:`time` file generally may be greater than the total time +really spent by the given CPU in the given idle state, because it is measured by +the kernel and it may not cover the cases in which the hardware refused to enter +this idle state and entered a shallower one instead of it (or even it did not +enter any idle state at all). The kernel can only measure the time span between +asking the hardware to enter an idle state and the subsequent wakeup of the CPU +and it cannot say what really happened in the meantime at the hardware level. +Moreover, if the idle state object in question represents a combination of idle +states at different levels of the hierarchy of units in the processor, +the kernel can never say how deep the hardware went down the hierarchy in any +particular case. For these reasons, the only reliable way to find out how +much time has been spent by the hardware in different idle states supported by +it is to use idle state residency counters in the hardware, if available. + + +.. _cpu-pm-qos: + +Power Management Quality of Service for CPUs +============================================ + +The power management quality of service (PM QoS) framework in the Linux kernel +allows kernel code and user space processes to set constraints on various +energy-efficiency features of the kernel to prevent performance from dropping +below a required level. The PM QoS constraints can be set globally, in +predefined categories referred to as PM QoS classes, or against individual +devices. + +CPU idle time management can be affected by PM QoS in two ways, through the +global constraint in the ``PM_QOS_CPU_DMA_LATENCY`` class and through the +resume latency constraints for individual CPUs. Kernel code (e.g. device +drivers) can set both of them with the help of special internal interfaces +provided by the PM QoS framework. User space can modify the former by opening +the :file:`cpu_dma_latency` special device file under :file:`/dev/` and writing +a binary value (interpreted as a signed 32-bit integer) to it. In turn, the +resume latency constraint for a CPU can be modified by user space by writing a +string (representing a signed 32-bit integer) to the +:file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs``, where the CPU number +``<N>`` is allocated at the system initialization time. Negative values +will be rejected in both cases and, also in both cases, the written integer +number will be interpreted as a requested PM QoS constraint in microseconds. + +The requested value is not automatically applied as a new constraint, however, +as it may be less restrictive (greater in this particular case) than another +constraint previously requested by someone else. For this reason, the PM QoS +framework maintains a list of requests that have been made so far in each +global class and for each device, aggregates them and applies the effective +(minimum in this particular case) value as the new constraint. + +In fact, opening the :file:`cpu_dma_latency` special device file causes a new +PM QoS request to be created and added to the priority list of requests in the +``PM_QOS_CPU_DMA_LATENCY`` class and the file descriptor coming from the +"open" operation represents that request. If that file descriptor is then +used for writing, the number written to it will be associated with the PM QoS +request represented by it as a new requested constraint value. Next, the +priority list mechanism will be used to determine the new effective value of +the entire list of requests and that effective value will be set as a new +constraint. Thus setting a new requested constraint value will only change the +real constraint if the effective "list" value is affected by it. In particular, +for the ``PM_QOS_CPU_DMA_LATENCY`` class it only affects the real constraint if +it is the minimum of the requested constraints in the list. The process holding +a file descriptor obtained by opening the :file:`cpu_dma_latency` special device +file controls the PM QoS request associated with that file descriptor, but it +controls this particular PM QoS request only. + +Closing the :file:`cpu_dma_latency` special device file or, more precisely, the +file descriptor obtained while opening it, causes the PM QoS request associated +with that file descriptor to be removed from the ``PM_QOS_CPU_DMA_LATENCY`` +class priority list and destroyed. If that happens, the priority list mechanism +will be used, again, to determine the new effective value for the whole list +and that value will become the new real constraint. + +In turn, for each CPU there is only one resume latency PM QoS request +associated with the :file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs`` and writing to it causes +this single PM QoS request to be updated regardless of which user space +process does that. In other words, this PM QoS request is shared by the entire +user space, so access to the file associated with it needs to be arbitrated +to avoid confusion. [Arguably, the only legitimate use of this mechanism in +practice is to pin a process to the CPU in question and let it use the +``sysfs`` interface to control the resume latency constraint for it.] It +still only is a request, however. It is a member of a priority list used to +determine the effective value to be set as the resume latency constraint for the +CPU in question every time the list of requests is updated this way or another +(there may be other requests coming from kernel code in that list). + +CPU idle time governors are expected to regard the minimum of the global +effective ``PM_QOS_CPU_DMA_LATENCY`` class constraint and the effective +resume latency constraint for the given CPU as the upper limit for the exit +latency of the idle states they can select for that CPU. They should never +select any idle states with exit latency beyond that limit. + + +Idle States Control Via Kernel Command Line +=========================================== + +In addition to the ``sysfs`` interface allowing individual idle states to be +`disabled for individual CPUs <idle-states-representation_>`_, there are kernel +command line parameters affecting CPU idle time management. + +The ``cpuidle.off=1`` kernel command line option can be used to disable the +CPU idle time management entirely. It does not prevent the idle loop from +running on idle CPUs, but it prevents the CPU idle time governors and drivers +from being invoked. If it is added to the kernel command line, the idle loop +will ask the hardware to enter idle states on idle CPUs via the CPU architecture +support code that is expected to provide a default mechanism for this purpose. +That default mechanism usually is the least common denominator for all of the +processors implementing the architecture (i.e. CPU instruction set) in question, +however, so it is rather crude and not very energy-efficient. For this reason, +it is not recommended for production use. + +The ``cpuidle.governor=`` kernel command line switch allows the ``CPUIdle`` +governor to use to be specified. It has to be appended with a string matching +the name of an available governor (e.g. ``cpuidle.governor=menu``) and that +governor will be used instead of the default one. It is possible to force +the ``menu`` governor to be used on the systems that use the ``ladder`` governor +by default this way, for example. + +The other kernel command line parameters controlling CPU idle time management +described below are only relevant for the *x86* architecture and some of +them affect Intel processors only. + +The *x86* architecture support code recognizes three kernel command line +options related to CPU idle time management: ``idle=poll``, ``idle=halt``, +and ``idle=nomwait``. The first two of them disable the ``acpi_idle`` and +``intel_idle`` drivers altogether, which effectively causes the entire +``CPUIdle`` subsystem to be disabled and makes the idle loop invoke the +architecture support code to deal with idle CPUs. How it does that depends on +which of the two parameters is added to the kernel command line. In the +``idle=halt`` case, the architecture support code will use the ``HLT`` +instruction of the CPUs (which, as a rule, suspends the execution of the program +and causes the hardware to attempt to enter the shallowest available idle state) +for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a +more or less ``lightweight'' sequence of instructions in a tight loop. [Note +that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle +CPUs from saving almost any energy at all may not be the only effect of it. +For example, on Intel hardware it effectively prevents CPUs from using +P-states (see |cpufreq|) that require any number of CPUs in a package to be +idle, so it very well may hurt single-thread computations performance as well as +energy-efficiency. Thus using it for performance reasons may not be a good idea +at all.] + +The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes +``acpi_idle`` to be used (as long as all of the information needed by it is +there in the system's ACPI tables), but it is not allowed to use the +``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. + +In addition to the architecture-level kernel command line options affecting CPU +idle time management, there are parameters affecting individual ``CPUIdle`` +drivers that can be passed to them via the kernel command line. Specifically, +the ``intel_idle.max_cstate=<n>`` and ``processor.max_cstate=<n>`` parameters, +where ``<n>`` is an idle state index also used in the name of the given +state's directory in ``sysfs`` (see +`Representation of Idle States <idle-states-representation_>`_), causes the +``intel_idle`` and ``acpi_idle`` drivers, respectively, to discard all of the +idle states deeper than idle state ``<n>``. In that case, they will never ask +for any of those idle states or expose them to the governor. [The behavior of +the two drivers is different for ``<n>`` equal to ``0``. Adding +``intel_idle.max_cstate=0`` to the kernel command line disables the +``intel_idle`` driver and allows ``acpi_idle`` to be used, whereas +``processor.max_cstate=0`` is equivalent to ``processor.max_cstate=1``. +Also, the ``acpi_idle`` driver is part of the ``processor`` kernel module that +can be loaded separately and ``max_cstate=<n>`` can be passed to it as a module +parameter when it is loaded.] diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index ac6f5c597a56..ec0f7c111f65 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -495,7 +495,15 @@ on the following rules, regardless of the current operation mode of the driver: 2. Each individual CPU is affected by its own per-policy limits (that is, it cannot be requested to run faster than its own per-policy maximum and it - cannot be requested to run slower than its own per-policy minimum). + cannot be requested to run slower than its own per-policy minimum). The + effective performance depends on whether the platform supports per core + P-states, hyper-threading is enabled and on current performance requests + from other CPUs. When platform doesn't support per core P-states, the + effective performance can be more than the policy limits set on a CPU, if + other CPUs are requesting higher performance at that moment. Even with per + core P-states support, when hyper-threading is enabled, if the sibling CPU + is requesting higher performance, the other siblings will get higher + performance than their policy limits. 3. The global and per-policy limits can be set independently. diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst index fa01bf083dfe..b6cef9b5e961 100644 --- a/Documentation/admin-guide/pm/working-state.rst +++ b/Documentation/admin-guide/pm/working-state.rst @@ -5,5 +5,6 @@ Working-State Power Management .. toctree:: :maxdepth: 2 + cpuidle cpufreq intel_pstate diff --git a/Documentation/admin-guide/security-bugs.rst b/Documentation/admin-guide/security-bugs.rst index 164bf71149fd..30187d49dc2c 100644 --- a/Documentation/admin-guide/security-bugs.rst +++ b/Documentation/admin-guide/security-bugs.rst @@ -32,16 +32,17 @@ Disclosure and embargoed information The security list is not a disclosure channel. For that, see Coordination below. -Once a robust fix has been developed, our preference is to release the -fix in a timely fashion, treating it no differently than any of the other -thousands of changes and fixes the Linux kernel project releases every -month. - -However, at the request of the reporter, we will postpone releasing the -fix for up to 5 business days after the date of the report or after the -embargo has lifted; whichever comes first. The only exception to that -rule is if the bug is publicly known, in which case the preference is to -release the fix as soon as it's available. +Once a robust fix has been developed, the release process starts. Fixes +for publicly known bugs are released immediately. + +Although our preference is to release fixes for publicly undisclosed bugs +as soon as they become available, this may be postponed at the request of +the reporter or an affected party for up to 7 calendar days from the start +of the release process, with an exceptional extension to 14 calendar days +if it is agreed that the criticality of the bug requires more time. The +only valid reason for deferring the publication of a fix is to accommodate +the logistics of QA and large scale rollouts which require release +coordination. Whilst embargoed information may be shared with trusted individuals in order to develop a fix, such information will not be published alongside diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 35fccba6a9a6..898ad78f3cc7 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -133,6 +133,26 @@ If the user still wants to connect the device they can either approve the device without a key or write a new key and write 1 to the ``authorized`` file to get the new key stored on the device NVM. +DMA protection utilizing IOMMU +------------------------------ +Recent systems from 2018 and forward with Thunderbolt ports may natively +support IOMMU. This means that Thunderbolt security is handled by an IOMMU +so connected devices cannot access memory regions outside of what is +allocated for them by drivers. When Linux is running on such system it +automatically enables IOMMU if not enabled by the user already. These +systems can be identified by reading ``1`` from +``/sys/bus/thunderbolt/devices/domainX/iommu_dma_protection`` attribute. + +The driver does not do anything special in this case but because DMA +protection is handled by the IOMMU, security levels (if set) are +redundant. For this reason some systems ship with security level set to +``none``. Other systems have security level set to ``user`` in order to +support downgrade to older OS, so users who want to automatically +authorize devices when IOMMU DMA protection is enabled can use the +following ``udev`` rule:: + + ACTION=="add", SUBSYSTEM=="thunderbolt", ATTRS{iommu_dma_protection}=="1", ATTR{authorized}=="0", ATTR{authorized}="1" + Upgrading NVM on Thunderbolt device or host ------------------------------------------- Since most of the functionality is handled in firmware running on a diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 8d0df62c3fe0..8df9f4658d6f 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -205,6 +205,14 @@ Before jumping into the kernel, the following conditions must be met: ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0. - The DT or ACPI tables must describe a GICv2 interrupt controller. + For CPUs with pointer authentication functionality: + - If EL3 is present: + SCR_EL3.APK (bit 16) must be initialised to 0b1 + SCR_EL3.API (bit 17) must be initialised to 0b1 + - If the kernel is entered at EL1: + HCR_EL2.APK (bit 40) must be initialised to 0b1 + HCR_EL2.API (bit 41) must be initialised to 0b1 + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must enter the kernel in the same exception level. diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.txt index 7964f03846b1..d4b4dd1fe786 100644 --- a/Documentation/arm64/cpu-feature-registers.txt +++ b/Documentation/arm64/cpu-feature-registers.txt @@ -184,12 +184,20 @@ infrastructure: x--------------------------------------------------x | Name | bits | visible | |--------------------------------------------------| + | GPI | [31-28] | y | + |--------------------------------------------------| + | GPA | [27-24] | y | + |--------------------------------------------------| | LRCPC | [23-20] | y | |--------------------------------------------------| | FCMA | [19-16] | y | |--------------------------------------------------| | JSCVT | [15-12] | y | |--------------------------------------------------| + | API | [11-8] | y | + |--------------------------------------------------| + | APA | [7-4] | y | + |--------------------------------------------------| | DPB | [3-0] | y | x--------------------------------------------------x diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.txt index ea819ae024dd..13d6691b37be 100644 --- a/Documentation/arm64/elf_hwcaps.txt +++ b/Documentation/arm64/elf_hwcaps.txt @@ -182,3 +182,15 @@ HWCAP_FLAGM HWCAP_SSBS Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010. + +HWCAP_PACA + + Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or + ID_AA64ISAR1_EL1.API == 0b0001, as described by + Documentation/arm64/pointer-authentication.txt. + +HWCAP_PACG + + Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or + ID_AA64ISAR1_EL1.GPI == 0b0001, as described by + Documentation/arm64/pointer-authentication.txt. diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.txt new file mode 100644 index 000000000000..a25cd21290e9 --- /dev/null +++ b/Documentation/arm64/pointer-authentication.txt @@ -0,0 +1,88 @@ +Pointer authentication in AArch64 Linux +======================================= + +Author: Mark Rutland <mark.rutland@arm.com> +Date: 2017-07-19 + +This document briefly describes the provision of pointer authentication +functionality in AArch64 Linux. + + +Architecture overview +--------------------- + +The ARMv8.3 Pointer Authentication extension adds primitives that can be +used to mitigate certain classes of attack where an attacker can corrupt +the contents of some memory (e.g. the stack). + +The extension uses a Pointer Authentication Code (PAC) to determine +whether pointers have been modified unexpectedly. A PAC is derived from +a pointer, another value (such as the stack pointer), and a secret key +held in system registers. + +The extension adds instructions to insert a valid PAC into a pointer, +and to verify/remove the PAC from a pointer. The PAC occupies a number +of high-order bits of the pointer, which varies dependent on the +configured virtual address size and whether pointer tagging is in use. + +A subset of these instructions have been allocated from the HINT +encoding space. In the absence of the extension (or when disabled), +these instructions behave as NOPs. Applications and libraries using +these instructions operate correctly regardless of the presence of the +extension. + +The extension provides five separate keys to generate PACs - two for +instruction addresses (APIAKey, APIBKey), two for data addresses +(APDAKey, APDBKey), and one for generic authentication (APGAKey). + + +Basic support +------------- + +When CONFIG_ARM64_PTR_AUTH is selected, and relevant HW support is +present, the kernel will assign random key values to each process at +exec*() time. The keys are shared by all threads within the process, and +are preserved across fork(). + +Presence of address authentication functionality is advertised via +HWCAP_PACA, and generic authentication functionality via HWCAP_PACG. + +The number of bits that the PAC occupies in a pointer is 55 minus the +virtual address size configured by the kernel. For example, with a +virtual address size of 48, the PAC is 7 bits wide. + +Recent versions of GCC can compile code with APIAKey-based return +address protection when passed the -msign-return-address option. This +uses instructions in the HINT space (unless -march=armv8.3-a or higher +is also passed), and such code can run on systems without the pointer +authentication extension. + +In addition to exec(), keys can also be reinitialized to random values +using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY, +PR_PAC_APIBKEY, PR_PAC_APDAKEY, PR_PAC_APDBKEY and PR_PAC_APGAKEY +specifies which keys are to be reinitialized; specifying 0 means "all +keys". + + +Debugging +--------- + +When CONFIG_ARM64_PTR_AUTH is selected, and HW support for address +authentication is present, the kernel will expose the position of TTBR0 +PAC bits in the NT_ARM_PAC_MASK regset (struct user_pac_mask), which +userspace can acquire via PTRACE_GETREGSET. + +The regset is exposed only when HWCAP_PACA is set. Separate masks are +exposed for data pointers and instruction pointers, as the set of PAC +bits can vary between the two. Note that the masks apply to TTBR0 +addresses, and are not valid to apply to TTBR1 addresses (e.g. kernel +pointers). + + +Virtualization +-------------- + +Pointer authentication is not currently supported in KVM guests. KVM +will mask the feature bits from ID_AA64ISAR1_EL1, and attempted use of +the feature will result in an UNDEFINED exception being injected into +the guest. diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 76ccded8b74c..1f09d043d086 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -57,6 +57,8 @@ stable kernels. | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | | ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 | | ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 | +| ARM | Cortex-A76 | #1165522 | ARM64_ERRATUM_1165522 | +| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 207eca58efaa..ac18b488cb5e 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -65,7 +65,6 @@ Description of Contents: 3.2.3 I/O completion 3.2.4 Implications for drivers that do not interpret bios (don't handle multiple segments) - 3.2.5 Request command tagging 3.3 I/O submission 4. The I/O scheduler 5. Scalability related changes @@ -708,93 +707,6 @@ is crossed on completion of a transfer. (The end*request* functions should be used if only if the request has come down from block/bio path, not for direct access requests which only specify rq->buffer without a valid rq->bio) -3.2.5 Generic request command tagging - -3.2.5.1 Tag helpers - -Block now offers some simple generic functionality to help support command -queueing (typically known as tagged command queueing), ie manage more than -one outstanding command on a queue at any given time. - - blk_queue_init_tags(struct request_queue *q, int depth) - - Initialize internal command tagging structures for a maximum - depth of 'depth'. - - blk_queue_free_tags((struct request_queue *q) - - Teardown tag info associated with the queue. This will be done - automatically by block if blk_queue_cleanup() is called on a queue - that is using tagging. - -The above are initialization and exit management, the main helpers during -normal operations are: - - blk_queue_start_tag(struct request_queue *q, struct request *rq) - - Start tagged operation for this request. A free tag number between - 0 and 'depth' is assigned to the request (rq->tag holds this number), - and 'rq' is added to the internal tag management. If the maximum depth - for this queue is already achieved (or if the tag wasn't started for - some other reason), 1 is returned. Otherwise 0 is returned. - - blk_queue_end_tag(struct request_queue *q, struct request *rq) - - End tagged operation on this request. 'rq' is removed from the internal - book keeping structures. - -To minimize struct request and queue overhead, the tag helpers utilize some -of the same request members that are used for normal request queue management. -This means that a request cannot both be an active tag and be on the queue -list at the same time. blk_queue_start_tag() will remove the request, but -the driver must remember to call blk_queue_end_tag() before signalling -completion of the request to the block layer. This means ending tag -operations before calling end_that_request_last()! For an example of a user -of these helpers, see the IDE tagged command queueing support. - -3.2.5.2 Tag info - -Some block functions exist to query current tag status or to go from a -tag number to the associated request. These are, in no particular order: - - blk_queue_tagged(q) - - Returns 1 if the queue 'q' is using tagging, 0 if not. - - blk_queue_tag_request(q, tag) - - Returns a pointer to the request associated with tag 'tag'. - - blk_queue_tag_depth(q) - - Return current queue depth. - - blk_queue_tag_queue(q) - - Returns 1 if the queue can accept a new queued command, 0 if we are - at the maximum depth already. - - blk_queue_rq_tagged(rq) - - Returns 1 if the request 'rq' is tagged. - -3.2.5.2 Internal structure - -Internally, block manages tags in the blk_queue_tag structure: - - struct blk_queue_tag { - struct request **tag_index; /* array or pointers to rq */ - unsigned long *tag_map; /* bitmap of free tags */ - struct list_head busy_list; /* fifo list of busy tags */ - int busy; /* queue depth */ - int max_depth; /* max queue depth */ - }; - -Most of the above is simple and straight forward, however busy_list may need -a bit of explaining. Normally we don't care too much about request ordering, -but in the event of any barrier requests in the tag queue we need to ensure -that requests are restarted in the order they were queue. - 3.3 I/O Submission The routine submit_bio() is used to submit a single io. Higher level i/o diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt deleted file mode 100644 index 895bd3813115..000000000000 --- a/Documentation/block/cfq-iosched.txt +++ /dev/null @@ -1,291 +0,0 @@ -CFQ (Complete Fairness Queueing) -=============================== - -The main aim of CFQ scheduler is to provide a fair allocation of the disk -I/O bandwidth for all the processes which requests an I/O operation. - -CFQ maintains the per process queue for the processes which request I/O -operation(synchronous requests). In case of asynchronous requests, all the -requests from all the processes are batched together according to their -process's I/O priority. - -CFQ ioscheduler tunables -======================== - -slice_idle ----------- -This specifies how long CFQ should idle for next request on certain cfq queues -(for sequential workloads) and service trees (for random workloads) before -queue is expired and CFQ selects next queue to dispatch from. - -By default slice_idle is a non-zero value. That means by default we idle on -queues/service trees. This can be very helpful on highly seeky media like -single spindle SATA/SAS disks where we can cut down on overall number of -seeks and see improved throughput. - -Setting slice_idle to 0 will remove all the idling on queues/service tree -level and one should see an overall improved throughput on faster storage -devices like multiple SATA/SAS disks in hardware RAID configuration. The down -side is that isolation provided from WRITES also goes down and notion of -IO priority becomes weaker. - -So depending on storage and workload, it might be useful to set slice_idle=0. -In general I think for SATA/SAS disks and software RAID of SATA/SAS disks -keeping slice_idle enabled should be useful. For any configurations where -there are multiple spindles behind single LUN (Host based hardware RAID -controller or for storage arrays), setting slice_idle=0 might end up in better -throughput and acceptable latencies. - -back_seek_max -------------- -This specifies, given in Kbytes, the maximum "distance" for backward seeking. -The distance is the amount of space from the current head location to the -sectors that are backward in terms of distance. - -This parameter allows the scheduler to anticipate requests in the "backward" -direction and consider them as being the "next" if they are within this -distance from the current head location. - -back_seek_penalty ------------------ -This parameter is used to compute the cost of backward seeking. If the -backward distance of request is just 1/back_seek_penalty from a "front" -request, then the seeking cost of two requests is considered equivalent. - -So scheduler will not bias toward one or the other request (otherwise scheduler -will bias toward front request). Default value of back_seek_penalty is 2. - -fifo_expire_async ------------------ -This parameter is used to set the timeout of asynchronous requests. Default -value of this is 248ms. - -fifo_expire_sync ----------------- -This parameter is used to set the timeout of synchronous requests. Default -value of this is 124ms. In case to favor synchronous requests over asynchronous -one, this value should be decreased relative to fifo_expire_async. - -group_idle ------------ -This parameter forces idling at the CFQ group level instead of CFQ -queue level. This was introduced after a bottleneck was observed -in higher end storage due to idle on sequential queue and allow dispatch -from a single queue. The idea with this parameter is that it can be run with -slice_idle=0 and group_idle=8, so that idling does not happen on individual -queues in the group but happens overall on the group and thus still keeps the -IO controller working. -Not idling on individual queues in the group will dispatch requests from -multiple queues in the group at the same time and achieve higher throughput -on higher end storage. - -Default value for this parameter is 8ms. - -low_latency ------------ -This parameter is used to enable/disable the low latency mode of the CFQ -scheduler. If enabled, CFQ tries to recompute the slice time for each process -based on the target_latency set for the system. This favors fairness over -throughput. Disabling low latency (setting it to 0) ignores target latency, -allowing each process in the system to get a full time slice. - -By default low latency mode is enabled. - -target_latency --------------- -This parameter is used to calculate the time slice for a process if cfq's -latency mode is enabled. It will ensure that sync requests have an estimated -latency. But if sequential workload is higher(e.g. sequential read), -then to meet the latency constraints, throughput may decrease because of less -time for each process to issue I/O request before the cfq queue is switched. - -Though this can be overcome by disabling the latency_mode, it may increase -the read latency for some applications. This parameter allows for changing -target_latency through the sysfs interface which can provide the balanced -throughput and read latency. - -Default value for target_latency is 300ms. - -slice_async ------------ -This parameter is same as of slice_sync but for asynchronous queue. The -default value is 40ms. - -slice_async_rq --------------- -This parameter is used to limit the dispatching of asynchronous request to -device request queue in queue's slice time. The maximum number of request that -are allowed to be dispatched also depends upon the io priority. Default value -for this is 2. - -slice_sync ----------- -When a queue is selected for execution, the queues IO requests are only -executed for a certain amount of time(time_slice) before switching to another -queue. This parameter is used to calculate the time slice of synchronous -queue. - -time_slice is computed using the below equation:- -time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the -time_slice of synchronous queue, increase the value of slice_sync. Default -value is 100ms. - -quantum -------- -This specifies the number of request dispatched to the device queue. In a -queue's time slice, a request will not be dispatched if the number of request -in the device exceeds this parameter. This parameter is used for synchronous -request. - -In case of storage with several disk, this setting can limit the parallel -processing of request. Therefore, increasing the value can improve the -performance although this can cause the latency of some I/O to increase due -to more number of requests. - -CFQ Group scheduling -==================== - -CFQ supports blkio cgroup and has "blkio." prefixed files in each -blkio cgroup directory. It is weight-based and there are four knobs -for configuration - weight[_device] and leaf_weight[_device]. -Internal cgroup nodes (the ones with children) can also have tasks in -them, so the former two configure how much proportion the cgroup as a -whole is entitled to at its parent's level while the latter two -configure how much proportion the tasks in the cgroup have compared to -its direct children. - -Another way to think about it is assuming that each internal node has -an implicit leaf child node which hosts all the tasks whose weight is -configured by leaf_weight[_device]. Let's assume a blkio hierarchy -composed of five cgroups - root, A, B, AA and AB - with the following -weights where the names represent the hierarchy. - - weight leaf_weight - root : 125 125 - A : 500 750 - B : 250 500 - AA : 500 500 - AB : 1000 500 - -root never has a parent making its weight is meaningless. For backward -compatibility, weight is always kept in sync with leaf_weight. B, AA -and AB have no child and thus its tasks have no children cgroup to -compete with. They always get 100% of what the cgroup won at the -parent level. Considering only the weights which matter, the hierarchy -looks like the following. - - root - / | \ - A B leaf - 500 250 125 - / | \ - AA AB leaf - 500 1000 750 - -If all cgroups have active IOs and competing with each other, disk -time will be distributed like the following. - -Distribution below root. The total active weight at this level is -A:500 + B:250 + C:125 = 875. - - root-leaf : 125 / 875 =~ 14% - A : 500 / 875 =~ 57% - B(-leaf) : 250 / 875 =~ 28% - -A has children and further distributes its 57% among the children and -the implicit leaf node. The total active weight at this level is -AA:500 + AB:1000 + A-leaf:750 = 2250. - - A-leaf : ( 750 / 2250) * A =~ 19% - AA(-leaf) : ( 500 / 2250) * A =~ 12% - AB(-leaf) : (1000 / 2250) * A =~ 25% - -CFQ IOPS Mode for group scheduling -=================================== -Basic CFQ design is to provide priority based time slices. Higher priority -process gets bigger time slice and lower priority process gets smaller time -slice. Measuring time becomes harder if storage is fast and supports NCQ and -it would be better to dispatch multiple requests from multiple cfq queues in -request queue at a time. In such scenario, it is not possible to measure time -consumed by single queue accurately. - -What is possible though is to measure number of requests dispatched from a -single queue and also allow dispatch from multiple cfq queue at the same time. -This effectively becomes the fairness in terms of IOPS (IO operations per -second). - -If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches -to IOPS mode and starts providing fairness in terms of number of requests -dispatched. Note that this mode switching takes effect only for group -scheduling. For non-cgroup users nothing should change. - -CFQ IO scheduler Idling Theory -=============================== -Idling on a queue is primarily about waiting for the next request to come -on same queue after completion of a request. In this process CFQ will not -dispatch requests from other cfq queues even if requests are pending there. - -The rationale behind idling is that it can cut down on number of seeks -on rotational media. For example, if a process is doing dependent -sequential reads (next read will come on only after completion of previous -one), then not dispatching request from other queue should help as we -did not move the disk head and kept on dispatching sequential IO from -one queue. - -CFQ has following service trees and various queues are put on these trees. - - sync-idle sync-noidle async - -All cfq queues doing synchronous sequential IO go on to sync-idle tree. -On this tree we idle on each queue individually. - -All synchronous non-sequential queues go on sync-noidle tree. Also any -synchronous write request which is not marked with REQ_IDLE goes on this -service tree. On this tree we do not idle on individual queues instead idle -on the whole group of queues or the tree. So if there are 4 queues waiting -for IO to dispatch we will idle only once last queue has dispatched the IO -and there is no more IO on this service tree. - -All async writes go on async service tree. There is no idling on async -queues. - -CFQ has some optimizations for SSDs and if it detects a non-rotational -media which can support higher queue depth (multiple requests at in -flight at a time), then it cuts down on idling of individual queues and -all the queues move to sync-noidle tree and only tree idle remains. This -tree idling provides isolation with buffered write queues on async tree. - -FAQ -=== -Q1. Why to idle at all on queues not marked with REQ_IDLE. - -A1. We only do tree idle (all queues on sync-noidle tree) on queues not marked - with REQ_IDLE. This helps in providing isolation with all the sync-idle - queues. Otherwise in presence of many sequential readers, other - synchronous IO might not get fair share of disk. - - For example, if there are 10 sequential readers doing IO and they get - 100ms each. If a !REQ_IDLE request comes in, it will be scheduled - roughly after 1 second. If after completion of !REQ_IDLE request we - do not idle, and after a couple of milli seconds a another !REQ_IDLE - request comes in, again it will be scheduled after 1second. Repeat it - and notice how a workload can lose its disk share and suffer due to - multiple sequential readers. - - fsync can generate dependent IO where bunch of data is written in the - context of fsync, and later some journaling data is written. Journaling - data comes in only after fsync has finished its IO (atleast for ext4 - that seemed to be the case). Now if one decides not to idle on fsync - thread due to !REQ_IDLE, then next journaling write will not get - scheduled for another second. A process doing small fsync, will suffer - badly in presence of multiple sequential readers. - - Hence doing tree idling on threads using !REQ_IDLE flag on requests - provides isolation from multiple sequential readers and at the same - time we do not idle on individual threads. - -Q2. When to specify REQ_IDLE -A2. I would think whenever one is doing synchronous write and expecting - more writes to be dispatched from same context soon, should be able - to specify REQ_IDLE on writes and that probably should work well for - most of the cases. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 2c1e67058fd3..39e286d7afc9 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -64,7 +64,7 @@ guess, the kernel will put the process issuing IO to sleep for an amount of time, before entering a classic poll loop. This mode might be a little slower than pure classic polling, but it will be more efficient. If set to a value larger than 0, the kernel will put the process issuing -IO to sleep for this amont of microseconds before entering classic +IO to sleep for this amount of microseconds before entering classic polling. iostats (RW) @@ -194,4 +194,31 @@ blk-throttle makes decision based on the samplings. Lower time means cgroups have more smooth throughput, but higher CPU overhead. This exists only when CONFIG_BLK_DEV_THROTTLING_LOW is enabled. +zoned (RO) +---------- +This indicates if the device is a zoned block device and the zone model of the +device if it is indeed zoned. The possible values indicated by zoned are +"none" for regular block devices and "host-aware" or "host-managed" for zoned +block devices. The characteristics of host-aware and host-managed zoned block +devices are described in the ZBC (Zoned Block Commands) and ZAC +(Zoned Device ATA Command Set) standards. These standards also define the +"drive-managed" zone model. However, since drive-managed zoned block devices +do not support zone commands, they will be treated as regular block devices +and zoned will report "none". + +nr_zones (RO) +------------- +For zoned block devices (zoned attribute indicating "host-managed" or +"host-aware"), this indicates the total number of zones of the device. +This is always 0 for regular block devices. + +chunk_sectors (RO) +------------------ +This has different meaning depending on the type of the block device. +For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors +of the RAID volume stripe segment. For a zoned block device, either host-aware +or host-managed, chunk_sectors indicates the size in 512B sectors of the zones +of the device, with the eventual exception of the last zone of the device which +may be smaller. + Jens Axboe <jens.axboe@oracle.com>, February 2009 diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 3c1b5ab54bc0..436c5e98e1b6 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -164,11 +164,14 @@ reset WO trigger device reset mem_used_max WO reset the `mem_used_max' counter (see later) mem_limit WO specifies the maximum amount of memory ZRAM can use to store the compressed data +writeback_limit WO specifies the maximum amount of write IO zram can + write out to backing device as 4KB unit max_comp_streams RW the number of possible concurrent compress operations comp_algorithm RW show and change the compression algorithm compact WO trigger memory compaction debug_stat RO this file is used for zram debugging purposes backing_dev RW set up backend storage for zram to write out +idle WO mark allocated slot as idle User space is advised to use the following files to read the device statistics. @@ -220,6 +223,17 @@ line of text and contains the following stats separated by whitespace: pages_compacted the number of pages freed during compaction huge_pages the number of incompressible pages +File /sys/block/zram<id>/bd_stat + +The stat file represents device's backing device statistics. It consists of +a single line of text and contains the following stats separated by whitespace: + bd_count size of data written in backing device. + Unit: 4K bytes + bd_reads the number of reads from backing device + Unit: 4K bytes + bd_writes the number of writes to backing device + Unit: 4K bytes + 9) Deactivate: swapoff /dev/zram0 umount /dev/zram1 @@ -237,11 +251,60 @@ line of text and contains the following stats separated by whitespace: = writeback -With incompressible pages, there is no memory saving with zram. -Instead, with CONFIG_ZRAM_WRITEBACK, zram can write incompressible page +With CONFIG_ZRAM_WRITEBACK, zram can write idle/incompressible page to backing storage rather than keeping it in memory. -User should set up backing device via /sys/block/zramX/backing_dev -before disksize setting. +To use the feature, admin should set up backing device via + + "echo /dev/sda5 > /sys/block/zramX/backing_dev" + +before disksize setting. It supports only partition at this moment. +If admin want to use incompressible page writeback, they could do via + + "echo huge > /sys/block/zramX/write" + +To use idle page writeback, first, user need to declare zram pages +as idle. + + "echo all > /sys/block/zramX/idle" + +From now on, any pages on zram are idle pages. The idle mark +will be removed until someone request access of the block. +IOW, unless there is access request, those pages are still idle pages. + +Admin can request writeback of those idle pages at right timing via + + "echo idle > /sys/block/zramX/writeback" + +With the command, zram writeback idle pages from memory to the storage. + +If there are lots of write IO with flash device, potentially, it has +flash wearout problem so that admin needs to design write limitation +to guarantee storage health for entire product life. +To overcome the concern, zram supports "writeback_limit". +The "writeback_limit"'s default value is 0 so that it doesn't limit +any writeback. If admin want to measure writeback count in a certain +period, he could know it via /sys/block/zram0/bd_stat's 3rd column. + +If admin want to limit writeback as per-day 400M, he could do it +like below. + + MB_SHIFT=20 + 4K_SHIFT=12 + echo $((400<<MB_SHIFT>>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit. + +If admin want to allow further write again, he could do it like below + + echo 0 > /sys/block/zram0/writeback_limit + +If admin want to see remaining writeback budget since he set, + + cat /sys/block/zram0/writeback_limit + +The writeback_limit count will reset whenever you reset zram(e.g., +system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of +writeback happened until you reset the zram to allocate extra writeback +budget in next setting is user's job. = memory tracking @@ -251,16 +314,17 @@ pages of the process with*pagemap. If you enable the feature, you could see block state via /sys/kernel/debug/zram/zram0/block_state". The output is as follows, - 300 75.033841 .wh - 301 63.806904 s.. - 302 63.806919 ..h + 300 75.033841 .wh. + 301 63.806904 s... + 302 63.806919 ..hi First column is zram's block index. Second column is access time since the system was booted Third column is state of the block. (s: same page w: written page to backing store -h: huge page) +h: huge page +i: idle page) First line of above example says 300th block is accessed at 75.033841sec and the block's state is huge so it is written back to the backing diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index a4e705108f42..6a6d67acaf69 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -74,7 +74,8 @@ using :c:func:`xa_load`. xa_store will overwrite any entry with the new entry and return the previous entry stored at that index. You can use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a ``NULL`` entry. There is no difference between an entry that has never -been stored to and one that has most recently had ``NULL`` stored to it. +been stored to, one that has been erased and one that has most recently +had ``NULL`` stored to it. You can conditionally replace an entry at an index by using :c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if @@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other indices. Storing into one index may result in the entry retrieved by some, but not all of the other indices changing. +Sometimes you need to ensure that a subsequent call to :c:func:`xa_store` +will not need to allocate memory. The :c:func:`xa_reserve` function +will store a reserved entry at the indicated index. Users of the normal +API will see this entry as containing ``NULL``. If you do not need to +use the reserved entry, you can call :c:func:`xa_release` to remove the +unused entry. If another user has stored to the entry in the meantime, +:c:func:`xa_release` will do nothing; if instead you want the entry to +become ``NULL``, you should use :c:func:`xa_erase`. + +If all entries in the array are ``NULL``, the :c:func:`xa_empty` function +will return ``true``. + Finally, you can remove all entries from an XArray by calling :c:func:`xa_destroy`. If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present entries in the XArray using the :c:func:`xa_for_each` iterator. -ID assignment -------------- +Allocating XArrays +------------------ + +If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or +initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +the XArray changes to track whether entries are in use or not. You can call :c:func:`xa_alloc` to store the entry at any unused index in the XArray. If you need to modify the array from interrupt context, you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable -interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating -a ``NULL`` pointer does not delete an entry. Instead it reserves an -entry like :c:func:`xa_reserve` and you can release it using either -:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the -XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised -by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +interrupts while allocating the ID. + +Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert` +will mark the entry as being allocated. Unlike a normal XArray, storing +``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`. +To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if +you only want to free the entry if it's ``NULL``). + +You cannot use ``XA_MARK_0`` with an allocating XArray as this mark +is used to track whether an entry is free or not. The other marks are +available for your use. Memory allocation ----------------- @@ -158,15 +180,22 @@ Takes RCU read lock: Takes xa_lock internally: * :c:func:`xa_store` + * :c:func:`xa_store_bh` + * :c:func:`xa_store_irq` * :c:func:`xa_insert` * :c:func:`xa_erase` * :c:func:`xa_erase_bh` * :c:func:`xa_erase_irq` * :c:func:`xa_cmpxchg` + * :c:func:`xa_cmpxchg_bh` + * :c:func:`xa_cmpxchg_irq` * :c:func:`xa_store_range` * :c:func:`xa_alloc` * :c:func:`xa_alloc_bh` * :c:func:`xa_alloc_irq` + * :c:func:`xa_reserve` + * :c:func:`xa_reserve_bh` + * :c:func:`xa_reserve_irq` * :c:func:`xa_destroy` * :c:func:`xa_set_mark` * :c:func:`xa_clear_mark` @@ -177,6 +206,7 @@ Assumes xa_lock held on entry: * :c:func:`__xa_erase` * :c:func:`__xa_cmpxchg` * :c:func:`__xa_alloc` + * :c:func:`__xa_reserve` * :c:func:`__xa_set_mark` * :c:func:`__xa_clear_mark` @@ -234,7 +264,9 @@ Sharing the XArray with interrupt context is also possible, either using :c:func:`xa_lock_irqsave` in both the interrupt handler and process context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock` in the interrupt handler. Some of the more common patterns have helper -functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`. +functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`, +:c:func:`xa_erase_bh`, :c:func:`xa_erase_irq`, :c:func:`xa_cmpxchg_bh` +and :c:func:`xa_cmpxchg_irq`. Sometimes you need to protect access to the XArray with a mutex because that lock sits above another mutex in the locking hierarchy. That does @@ -322,7 +354,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``. - :c:func:`xa_is_zero` - Zero entries appear as ``NULL`` through the Normal API, but occupy an entry in the XArray which can be used to reserve the index for - future use. + future use. This is used by allocating XArrays for allocated entries + which are ``NULL``. Other internal entries may be added in the future. As far as possible, they will be handled by :c:func:`xas_retry`. diff --git a/Documentation/cpuidle/core.txt b/Documentation/cpuidle/core.txt deleted file mode 100644 index 63ecc5dc9d8a..000000000000 --- a/Documentation/cpuidle/core.txt +++ /dev/null @@ -1,23 +0,0 @@ - - Supporting multiple CPU idle levels in kernel - - cpuidle - -General Information: - -Various CPUs today support multiple idle levels that are differentiated -by varying exit latencies and power consumption during idle. -cpuidle is a generic in-kernel infrastructure that separates -idle policy (governor) from idle mechanism (driver) and provides a -standardized infrastructure to support independent development of -governors and drivers. - -cpuidle resides under drivers/cpuidle. - -Boot options: -"cpuidle_sysfs_switch" -enables current_governor interface in /sys/devices/system/cpu/cpuidle/, -which can be used to switch governors at run time. This boot option -is meant for developer testing only. In normal usage, kernel picks the -best governor based on governor ratings. -SEE ALSO: sysfs.txt in this directory. diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt deleted file mode 100644 index d1587f434e7b..000000000000 --- a/Documentation/cpuidle/sysfs.txt +++ /dev/null @@ -1,98 +0,0 @@ - - - Supporting multiple CPU idle levels in kernel - - cpuidle sysfs - -System global cpuidle related information and tunables are under -/sys/devices/system/cpu/cpuidle - -The current interfaces in this directory has self-explanatory names: -* current_driver -* current_governor_ro - -With cpuidle_sysfs_switch boot option (meant for developer testing) -following objects are visible instead. -* current_driver -* available_governors -* current_governor -In this case users can switch the governor at run time by writing -to current_governor. - - -Per logical CPU specific cpuidle information are under -/sys/devices/system/cpu/cpuX/cpuidle -for each online cpu X - --------------------------------------------------------------------------------- -# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/ -/sys/devices/system/cpu/cpu0/cpuidle/: -total 0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state1 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state2 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state3 - -/sys/devices/system/cpu/cpu0/cpuidle/state0: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state1: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state2: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state3: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage --------------------------------------------------------------------------------- - - -* desc : Small description about the idle state (string) -* disable : Option to disable this idle state (bool) -> see note below -* latency : Latency to exit out of this idle state (in microseconds) -* residency : Time after which a state becomes more effecient than any - shallower state (in microseconds) -* name : Name of the idle state (string) -* power : Power consumed while in this idle state (in milliwatts) -* time : Total time spent in this idle state (in microseconds) -* usage : Number of times this state was entered (count) - -Note: -The behavior and the effect of the disable variable depends on the -implementation of a particular governor. In the ladder governor, for -example, it is not coherent, i.e. if one is disabling a light state, -then all deeper states are disabled as well, but the disable variable -does not reflect it. Likewise, if one enables a deep state but a lighter -state still is disabled, then this has no effect. diff --git a/Documentation/crypto/api.rst b/Documentation/crypto/api.rst index 2e519193ab4a..b91b31736df8 100644 --- a/Documentation/crypto/api.rst +++ b/Documentation/crypto/api.rst @@ -1,15 +1,6 @@ Programming Interface ===================== -Please note that the kernel crypto API contains the AEAD givcrypt API -(crypto_aead_giv\* and aead_givcrypt\* function calls in -include/crypto/aead.h). This API is obsolete and will be removed in the -future. To obtain the functionality of an AEAD cipher with internal IV -generation, use the IV generator as a regular cipher. For example, -rfc4106(gcm(aes)) is the AEAD cipher with external IV generation and -seqniv(rfc4106(gcm(aes))) implies that the kernel crypto API generates -the IV. Different IV generators are available. - .. class:: toc-title Table of contents diff --git a/Documentation/crypto/architecture.rst b/Documentation/crypto/architecture.rst index ca2d09b991f5..ee8ff0762d7f 100644 --- a/Documentation/crypto/architecture.rst +++ b/Documentation/crypto/architecture.rst @@ -157,10 +157,6 @@ applicable to a cipher, it is not displayed: - rng for random number generator - - givcipher for cipher with associated IV generator (see the geniv - entry below for the specification of the IV generator type used by - the cipher implementation) - - kpp for a Key-agreement Protocol Primitive (KPP) cipher such as an ECDH or DH implementation @@ -174,16 +170,7 @@ applicable to a cipher, it is not displayed: - digestsize: output size of the message digest -- geniv: IV generation type: - - - eseqiv for encrypted sequence number based IV generation - - - seqiv for sequence number based IV generation - - - chainiv for chain iv generation - - - <builtin> is a marker that the cipher implements IV generation and - handling as it is specific to the given cipher +- geniv: IV generator (obsolete) Key Sizes --------- @@ -218,10 +205,6 @@ the aforementioned cipher types: - CRYPTO_ALG_TYPE_ABLKCIPHER Asynchronous multi-block cipher -- CRYPTO_ALG_TYPE_GIVCIPHER Asynchronous multi-block cipher packed - together with an IV generator (see geniv field in the /proc/crypto - listing for the known IV generators) - - CRYPTO_ALG_TYPE_KPP Key-agreement Protocol Primitive (KPP) such as an ECDH or DH implementation @@ -338,18 +321,14 @@ uses the API applicable to the cipher type specified for the block. The following call sequence is applicable when the IPSEC layer triggers an encryption operation with the esp_output function. During -configuration, the administrator set up the use of rfc4106(gcm(aes)) as -the cipher for ESP. The following call sequence is now depicted in the -ASCII art above: +configuration, the administrator set up the use of seqiv(rfc4106(gcm(aes))) +as the cipher for ESP. The following call sequence is now depicted in +the ASCII art above: 1. esp_output() invokes crypto_aead_encrypt() to trigger an encryption operation of the AEAD cipher with IV generator. - In case of GCM, the SEQIV implementation is registered as GIVCIPHER - in crypto_rfc4106_alloc(). - - The SEQIV performs its operation to generate an IV where the core - function is seqiv_geniv(). + The SEQIV generates the IV. 2. Now, SEQIV uses the AEAD API function calls to invoke the associated AEAD cipher. In our case, during the instantiation of SEQIV, the diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index aabc8738b3d8..b72d07d70239 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -4,15 +4,25 @@ The Kernel Address Sanitizer (KASAN) Overview -------- -KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides -a fast and comprehensive solution for finding use-after-free and out-of-bounds -bugs. +KernelAddressSANitizer (KASAN) is a dynamic memory error detector designed to +find out-of-bound and use-after-free bugs. KASAN has two modes: generic KASAN +(similar to userspace ASan) and software tag-based KASAN (similar to userspace +HWASan). -KASAN uses compile-time instrumentation for checking every memory access, -therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is -required for detection of out-of-bounds accesses to stack or global variables. +KASAN uses compile-time instrumentation to insert validity checks before every +memory access, and therefore requires a compiler version that supports that. -Currently KASAN is supported only for the x86_64 and arm64 architectures. +Generic KASAN is supported in both GCC and Clang. With GCC it requires version +4.9.2 or later for basic support and version 5.0 or later for detection of +out-of-bounds accesses for stack and global variables and for inline +instrumentation mode (see the Usage section). With Clang it requires version +7.0.0 or later and it doesn't support detection of out-of-bounds accesses for +global variables yet. + +Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later. + +Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390 +architectures, and tag-based KASAN is supported only for arm64. Usage ----- @@ -21,12 +31,14 @@ To enable KASAN configure kernel with:: CONFIG_KASAN = y -and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and -inline are compiler instrumentation types. The former produces smaller binary -the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC -version 5.0 or later. +and choose between CONFIG_KASAN_GENERIC (to enable generic KASAN) and +CONFIG_KASAN_SW_TAGS (to enable software tag-based KASAN). + +You also need to choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. +Outline and inline are compiler instrumentation types. The former produces +smaller binary while the latter is 1.1 - 2 times faster. -KASAN works with both SLUB and SLAB memory allocators. +Both KASAN modes work with both SLUB and SLAB memory allocators. For better bug detection and nicer reporting, enable CONFIG_STACKTRACE. To disable instrumentation for specific files or directories, add a line @@ -43,85 +55,85 @@ similar to the following to the respective kernel Makefile: Error reports ~~~~~~~~~~~~~ -A typical out of bounds access report looks like this:: +A typical out-of-bounds access generic KASAN report looks like this:: ================================================================== - BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3 - Write of size 1 by task modprobe/1689 - ============================================================================= - BUG kmalloc-128 (Not tainted): kasan error - ----------------------------------------------------------------------------- - - Disabling lock debugging due to kernel taint - INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689 - __slab_alloc+0x4b4/0x4f0 - kmem_cache_alloc_trace+0x10b/0x190 - kmalloc_oob_right+0x3d/0x75 [test_kasan] - init_module+0x9/0x47 [test_kasan] - do_one_initcall+0x99/0x200 - load_module+0x2cb3/0x3b20 - SyS_finit_module+0x76/0x80 - system_call_fastpath+0x12/0x17 - INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080 - INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720 - - Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ - Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk - Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. - Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc ........ - Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ - CPU: 0 PID: 1689 Comm: modprobe Tainted: G B 3.18.0-rc1-mm1+ #98 - Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 - ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78 - ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8 - ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558 + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 + + CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 + Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: - [<ffffffff81cc68ae>] dump_stack+0x46/0x58 - [<ffffffff811fd848>] print_trailer+0xf8/0x160 - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] - [<ffffffff811ff0f5>] object_err+0x35/0x40 - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0 - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 - [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40 - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40 - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan] - [<ffffffff8120a995>] __asan_store1+0x75/0xb0 - [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan] - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan] - [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan] - [<ffffffff810002d9>] do_one_initcall+0x99/0x200 - [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160 - [<ffffffff81114f63>] load_module+0x2cb3/0x3b20 - [<ffffffff8110fd70>] ? m_show+0x240/0x240 - [<ffffffff81115f06>] SyS_finit_module+0x76/0x80 - [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17 + dump_stack+0x94/0xd8 + print_address_description+0x73/0x280 + kasan_report+0x144/0x187 + __asan_report_store1_noabort+0x17/0x20 + kmalloc_oob_right+0xa8/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + RIP: 0033:0x7f96443109da + RSP: 002b:00007ffcf0b51b08 EFLAGS: 00000202 ORIG_RAX: 00000000000000af + RAX: ffffffffffffffda RBX: 000055dc3ee521a0 RCX: 00007f96443109da + RDX: 00007f96445cff88 RSI: 0000000000057a50 RDI: 00007f9644992000 + RBP: 000055dc3ee510b0 R08: 0000000000000003 R09: 0000000000000000 + R10: 00007f964430cd0a R11: 0000000000000202 R12: 00007f96445cff88 + R13: 000055dc3ee51090 R14: 0000000000000000 R15: 0000000000000000 + + Allocated by task 2760: + save_stack+0x43/0xd0 + kasan_kmalloc+0xa7/0xd0 + kmem_cache_alloc_trace+0xe1/0x1b0 + kmalloc_oob_right+0x56/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + + Freed by task 815: + save_stack+0x43/0xd0 + __kasan_slab_free+0x135/0x190 + kasan_slab_free+0xe/0x10 + kfree+0x93/0x1a0 + umh_complete+0x6a/0xa0 + call_usermodehelper_exec_async+0x4c3/0x640 + ret_from_fork+0x35/0x40 + + The buggy address belongs to the object at ffff8801f44ec300 + which belongs to the cache kmalloc-128 of size 128 + The buggy address is located 123 bytes inside of + 128-byte region [ffff8801f44ec300, ffff8801f44ec380) + The buggy address belongs to the page: + page:ffffea0007d13b00 count:1 mapcount:0 mapping:ffff8801f7001640 index:0x0 + flags: 0x200000000000100(slab) + raw: 0200000000000100 ffffea0007d11dc0 0000001a0000001a ffff8801f7001640 + raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 + page dumped because: kasan: bad access detected + Memory state around the buggy address: - ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc - ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00 - >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc - ^ - ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc - ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb - ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb - ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb + ffff8801f44ec200: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc + >ffff8801f44ec300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 + ^ + ffff8801f44ec380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== -The header of the report discribe what kind of bug happened and what kind of -access caused it. It's followed by the description of the accessed slub object -(see 'SLUB Debug output' section in Documentation/vm/slub.rst for details) and -the description of the accessed memory page. +The header of the report provides a short summary of what kind of bug happened +and what kind of access caused it. It's followed by a stack trace of the bad +access, a stack trace of where the accessed memory was allocated (in case bad +access happens on a slab object), and a stack trace of where the object was +freed (in case of a use-after-free bug report). Next comes a description of +the accessed slab object and information about the accessed memory page. In the last section the report shows memory state around the accessed address. Reading this part requires some understanding of how KASAN works. @@ -138,18 +150,24 @@ inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h). In the report above the arrows point to the shadow byte 03, which means that the accessed address is partially accessible. +For tag-based KASAN this last report section shows the memory tags around the +accessed address (see Implementation details section). + Implementation details ---------------------- +Generic KASAN +~~~~~~~~~~~~~ + From a high level, our approach to memory error detection is similar to that of kmemcheck: use shadow memory to record whether each byte of memory is safe -to access, and use compile-time instrumentation to check shadow memory on each -memory access. +to access, and use compile-time instrumentation to insert checks of shadow +memory on each memory access. -AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory -(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and -offset to translate a memory address to its corresponding shadow address. +Generic KASAN dedicates 1/8th of kernel memory to its shadow memory (e.g. 16TB +to cover 128TB on x86_64) and uses direct mapping with a scale and offset to +translate a memory address to its corresponding shadow address. Here is the function which translates an address to its corresponding shadow address:: @@ -162,12 +180,38 @@ address:: where ``KASAN_SHADOW_SCALE_SHIFT = 3``. -Compile-time instrumentation used for checking memory accesses. Compiler inserts -function calls (__asan_load*(addr), __asan_store*(addr)) before each memory -access of size 1, 2, 4, 8 or 16. These functions check whether memory access is -valid or not by checking corresponding shadow memory. +Compile-time instrumentation is used to insert memory access checks. Compiler +inserts function calls (__asan_load*(addr), __asan_store*(addr)) before each +memory access of size 1, 2, 4, 8 or 16. These functions check whether memory +access is valid or not by checking corresponding shadow memory. GCC 5.0 has possibility to perform inline instrumentation. Instead of making function calls GCC directly inserts the code to check the shadow memory. This option significantly enlarges kernel but it gives x1.1-x2 performance boost over outline instrumented kernel. + +Software tag-based KASAN +~~~~~~~~~~~~~~~~~~~~~~~~ + +Tag-based KASAN uses the Top Byte Ignore (TBI) feature of modern arm64 CPUs to +store a pointer tag in the top byte of kernel pointers. Like generic KASAN it +uses shadow memory to store memory tags associated with each 16-byte memory +cell (therefore it dedicates 1/16th of the kernel memory for shadow memory). + +On each memory allocation tag-based KASAN generates a random tag, tags the +allocated memory with this tag, and embeds this tag into the returned pointer. +Software tag-based KASAN uses compile-time instrumentation to insert checks +before each memory access. These checks make sure that tag of the memory that +is being accessed is equal to tag of the pointer that is used to access this +memory. In case of a tag mismatch tag-based KASAN prints a bug report. + +Software tag-based KASAN also has two instrumentation modes (outline, that +emits callbacks to check memory accesses; and inline, that performs the shadow +memory checks inline). With outline instrumentation mode, a bug report is +simply printed from the function that performs the access check. With inline +instrumentation a brk instruction is emitted by the compiler, and a dedicated +brk handler is used to print bug reports. + +A potential expansion of this mode is a hardware tag-based mode, which would +use hardware memory tagging support instead of compiler instrumentation and +manual shadow memory manipulation. diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore new file mode 100644 index 000000000000..ef82fcfcccab --- /dev/null +++ b/Documentation/devicetree/bindings/.gitignore @@ -0,0 +1,2 @@ +*.example.dts +processed-schema.yaml diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile new file mode 100644 index 000000000000..6e5cef0ed6fb --- /dev/null +++ b/Documentation/devicetree/bindings/Makefile @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +DT_DOC_CHECKER ?= dt-doc-validate +DT_EXTRACT_EX ?= dt-extract-example +DT_MK_SCHEMA ?= dt-mk-schema +DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u) + +quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) + cmd_chk_binding = $(DT_DOC_CHECKER) $< ; \ + $(DT_EXTRACT_EX) $< > $@ + +$(obj)/%.example.dts: $(src)/%.yaml FORCE + $(call if_changed,chk_binding) + +DT_TMP_SCHEMA := processed-schema.yaml +extra-y += $(DT_TMP_SCHEMA) + +quiet_cmd_mk_schema = SCHEMA $@ + cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) + +DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml') +DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) + +extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) +extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)) + +$(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE + $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/altera.txt b/Documentation/devicetree/bindings/arm/altera.txt deleted file mode 100644 index 558735aacca8..000000000000 --- a/Documentation/devicetree/bindings/arm/altera.txt +++ /dev/null @@ -1,14 +0,0 @@ -Altera's SoCFPGA platform device tree bindings ---------------------------------------------- - -Boards with Cyclone 5 SoC: -Required root node properties: -compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - -Boards with Arria 5 SoC: -Required root node properties: -compatible = "altr,socfpga-arria5", "altr,socfpga"; - -Boards with Arria 10 SoC: -Required root node properties: -compatible = "altr,socfpga-arria10", "altr,socfpga"; diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml new file mode 100644 index 000000000000..49e0362ddc11 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera's SoCFPGA platform device tree bindings + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + items: + - enum: + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 + - const: altr,socfpga +... diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt deleted file mode 100644 index 2c28f1d12f45..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt +++ /dev/null @@ -1,11 +0,0 @@ -Altera SOCFPGA Clock Manager - -Required properties: -- compatible : "altr,clk-mgr" -- reg : Should contain base address and length for Clock Manager - -Example: - clkmgr@ffd04000 { - compatible = "altr,clk-mgr"; - reg = <0xffd04000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml new file mode 100644 index 000000000000..e4131fa42b26 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera/socfpga-clk-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Clock Manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: test + +properties: + compatible: + items: + - const: altr,clk-mgr + reg: + maxItems: 1 + +required: + - compatible + +examples: + - | + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 4b96608ad692..14f319f694b7 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -158,14 +158,24 @@ Security Module (SECUMOD) The Security Module macrocell provides all necessary secure functions to avoid voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled +embeds secure memories that can be scrambled. + +The Security Module also offers the PIOBU pins which can be used as GPIO pins. +Note that they maintain their voltage during Backup/Self-refresh. required properties: - compatible: Should be "atmel,<chip>-secumod", "syscon". <chip> can be "sama5d2". - reg: Should contain registers location and length +- gpio-controller: Marks the port as GPIO controller. +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. + secumod@fc040000 { compatible = "atmel,sama5d2-secumod", "syscon"; reg = <0xfc040000 0x100>; + gpio-controller; + #gpio-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt deleted file mode 100644 index 25fcf96795ca..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda.txt +++ /dev/null @@ -1,15 +0,0 @@ -Calxeda Platforms Device Tree Bindings ------------------------------------------------ - -Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the -following properties. - -Required root node properties: - - compatible = "calxeda,highbank"; - - -Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following -properties. - -Required root node properties: - - compatible = "calxeda,ecx-2000"; diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml new file mode 100644 index 000000000000..aa5571d23c39 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Platforms Device Tree Bindings + +maintainers: + - Rob Herring <robh@kernel.org> +description: |+ + Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC + or Cortex-A15 based ECX-2000 SOCs + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - calxeda,highbank + - calxeda,ecx-2000 diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt deleted file mode 100644 index b0198a1cf403..000000000000 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ /dev/null @@ -1,490 +0,0 @@ -================= -ARM CPUs bindings -================= - -The device tree allows to describe the layout of CPUs in a system through -the "cpus" node, which in turn contains a number of subnodes (ie "cpu") -defining properties for every cpu. - -Bindings for CPU nodes follow the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -with updates for 32-bit and 64-bit ARM systems provided in this document. - -================================ -Convention used in this document -================================ - -This document follows the conventions described in the Devicetree -Specification, with the addition: - -- square brackets define bitfields, eg reg[7:0] value of the bitfield in - the reg property contained in bits 7 down to 0 - -===================================== -cpus and cpu node bindings definition -===================================== - -The ARM architecture, in accordance with the Devicetree Specification, -requires the cpus and cpu nodes to be present and contain the properties -described below. - -- cpus node - - Description: Container of cpu nodes - - The node name must be "cpus". - - A cpus node must define the following properties: - - - #address-cells - Usage: required - Value type: <u32> - - Definition depends on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - # On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - # On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - #size-cells - Usage: required - Value type: <u32> - Definition: must be set to 0 - -- cpu node - - Description: Describes a CPU in an ARM based system - - PROPERTIES - - - device_type - Usage: required - Value type: <string> - Definition: must be "cpu" - - reg - Usage and definition depend on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - # On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - # On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - # On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. - - * If cpus node's #address-cells property is set to 2 - - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. - - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. - - * If cpus node's #address-cells property is set to 1 - - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. - - All other bits in the reg cells must be set to 0. - - - compatible: - Usage: required - Value type: <string> - Definition: should be one of: - "arm,arm710t" - "arm,arm720t" - "arm,arm740t" - "arm,arm7ej-s" - "arm,arm7tdmi" - "arm,arm7tdmi-s" - "arm,arm9es" - "arm,arm9ej-s" - "arm,arm920t" - "arm,arm922t" - "arm,arm925" - "arm,arm926e-s" - "arm,arm926ej-s" - "arm,arm940t" - "arm,arm946e-s" - "arm,arm966e-s" - "arm,arm968e-s" - "arm,arm9tdmi" - "arm,arm1020e" - "arm,arm1020t" - "arm,arm1022e" - "arm,arm1026ej-s" - "arm,arm1136j-s" - "arm,arm1136jf-s" - "arm,arm1156t2-s" - "arm,arm1156t2f-s" - "arm,arm1176jzf" - "arm,arm1176jz-s" - "arm,arm1176jzf-s" - "arm,arm11mpcore" - "arm,cortex-a5" - "arm,cortex-a7" - "arm,cortex-a8" - "arm,cortex-a9" - "arm,cortex-a12" - "arm,cortex-a15" - "arm,cortex-a17" - "arm,cortex-a53" - "arm,cortex-a57" - "arm,cortex-a72" - "arm,cortex-a73" - "arm,cortex-m0" - "arm,cortex-m0+" - "arm,cortex-m1" - "arm,cortex-m3" - "arm,cortex-m4" - "arm,cortex-r4" - "arm,cortex-r5" - "arm,cortex-r7" - "brcm,brahma-b15" - "brcm,brahma-b53" - "brcm,vulcan" - "cavium,thunder" - "cavium,thunder2" - "faraday,fa526" - "intel,sa110" - "intel,sa1100" - "marvell,feroceon" - "marvell,mohawk" - "marvell,pj4a" - "marvell,pj4b" - "marvell,sheeva-v5" - "nvidia,tegra132-denver" - "nvidia,tegra186-denver" - "nvidia,tegra194-carmel" - "qcom,krait" - "qcom,kryo" - "qcom,kryo385" - "qcom,scorpion" - - enable-method - Value type: <stringlist> - Usage and definition depend on ARM architecture version. - # On ARM v8 64-bit this property is required and must - be one of: - "psci" - "spin-table" - # On ARM 32-bit systems this property is optional and - can be one of: - "actions,s500-smp" - "allwinner,sun6i-a31" - "allwinner,sun8i-a23" - "allwinner,sun9i-a80-smp" - "amlogic,meson8-smp" - "amlogic,meson8b-smp" - "arm,realview-smp" - "brcm,bcm11351-cpu-method" - "brcm,bcm23550" - "brcm,bcm2836-smp" - "brcm,bcm-nsp-smp" - "brcm,brahma-b15" - "marvell,armada-375-smp" - "marvell,armada-380-smp" - "marvell,armada-390-smp" - "marvell,armada-xp-smp" - "marvell,98dx3236-smp" - "mediatek,mt6589-smp" - "mediatek,mt81xx-tz-smp" - "qcom,gcc-msm8660" - "qcom,kpss-acc-v1" - "qcom,kpss-acc-v2" - "renesas,apmu" - "renesas,r9a06g032-smp" - "rockchip,rk3036-smp" - "rockchip,rk3066-smp" - "ste,dbx500-smp" - - - cpu-release-addr - Usage: required for systems that have an "enable-method" - property value of "spin-table". - Value type: <prop-encoded-array> - Definition: - # On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - - qcom,saw - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the SAW[1] node associated with this CPU. - - - qcom,acc - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the ACC[2] node associated with this CPU. - - - cpu-idle-states - Usage: Optional - Value type: <prop-encoded-array> - Definition: - # List of phandles to idle state nodes supported - by this cpu [3]. - - - capacity-dmips-mhz - Usage: Optional - Value type: <u32> - Definition: - # u32 value representing CPU capacity [4] in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - - rockchip,pmu - Usage: optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - Value type: <phandle> - Definition: Specifies the syscon node controlling the cpu core - power domains. - - - dynamic-power-coefficient - Usage: optional - Value type: <prop-encoded-array> - Definition: A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - -Example 1 (dual-cluster big.LITTLE system 32-bit): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - }; - }; - -Example 2 (Cortex-A8 uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - }; - }; - -Example 3 (ARM 926EJ-S uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - reg = <0x0>; - }; - }; - -Example 4 (ARM Cortex-A57 64-bit system): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; -}; - --- -[1] arm/msm/qcom,saw2.txt -[2] arm/msm/qcom,kpss-acc.txt -[3] ARM Linux kernel documentation - idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[4] ARM Linux kernel documentation - cpu capacity bindings - Documentation/devicetree/bindings/arm/cpu-capacity.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml new file mode 100644 index 000000000000..298c17b327c6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -0,0 +1,507 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM CPUs bindings + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + The device tree allows to describe the layout of CPUs in a system through + the "cpus" node, which in turn contains a number of subnodes (ie "cpu") + defining properties for every cpu. + + Bindings for CPU nodes follow the Devicetree Specification, available from: + + https://www.devicetree.org/specifications/ + + with updates for 32-bit and 64-bit ARM systems provided in this document. + + ================================ + Convention used in this document + ================================ + + This document follows the conventions described in the Devicetree + Specification, with the addition: + + - square brackets define bitfields, eg reg[7:0] value of the bitfield in + the reg property contained in bits 7 down to 0 + + ===================================== + cpus and cpu node bindings definition + ===================================== + + The ARM architecture, in accordance with the Devicetree Specification, + requires the cpus and cpu nodes to be present and contain the properties + described below. + +properties: + $nodename: + const: cpus + description: Container of cpu nodes + + '#address-cells': + enum: [1, 2] + description: | + Definition depends on ARM architecture version and configuration: + + On uniprocessor ARM architectures previous to v7 + value must be 1, to enable a simple enumeration + scheme for processors that do not have a HW CPU + identification register. + On 32-bit ARM 11 MPcore, ARM v7 or later systems + value must be 1, that corresponds to CPUID/MPIDR + registers sizes. + On ARM v8 64-bit systems value should be set to 2, + that corresponds to the MPIDR_EL1 register size. + If MPIDR_EL1[63:32] value is equal to 0 on all CPUs + in the system, #address-cells can be set to 1, since + MPIDR_EL1[63:32] bits are not used for CPUs + identification. + + '#size-cells': + const: 0 + +patternProperties: + '^cpu@[0-9a-f]+$': + properties: + device_type: + const: cpu + + reg: + maxItems: 1 + description: | + Usage and definition depend on ARM architecture version and + configuration: + + On uniprocessor ARM architectures previous to v7 + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + items: + - enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,saw2.txt + + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,kpss-acc.txt + + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. + + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. + + required: + - device_type + - reg + - compatible + + dependencies: + cpu-release-addr: [enable-method] + rockchip,pmu: [enable-method] + +required: + - '#address-cells' + - '#size-cells' + +examples: + - | + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + }; + + - | + // Example 2 (Cortex-A8 uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; + }; + + - | + // Example 3 (ARM 926EJ-S uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + reg = <0x0>; + }; + }; + + - | + // Example 4 (ARM Cortex-A57 64-bit system): + cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt deleted file mode 100644 index 715622c36260..000000000000 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ /dev/null @@ -1,25 +0,0 @@ -Texas Instruments DaVinci Platforms Device Tree Bindings --------------------------------------------------------- - -DA850/OMAP-L138/AM18x Evaluation Module (EVM) board -Required root node properties: - - compatible = "ti,da850-evm", "ti,da850"; - -DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board -Required root node properties: - - compatible = "ti,da850-lcdk", "ti,da850"; - -EnBW AM1808 based CMC board -Required root node properties: - - compatible = "enbw,cmc", "ti,da850; - -LEGO MINDSTORMS EV3 (AM1808 based) -Required root node properties: - - compatible = "lego,ev3", "ti,da850"; - -Generic DaVinci Boards ----------------------- - -DA850/OMAP-L138/AM18x generic board -Required root node properties: - - compatible = "ti,da850"; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 46d0af1f0872..c20f38e56544 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -58,19 +58,11 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,scu-pd". -- #address-cells: Should be 1. -- #size-cells: Should be 0. - -Required properties for power domain sub nodes: -- #power-domain-cells: Must be 0. - -Optional Properties: -- reg: Resource ID of this power domain. - No exist means uncontrollable by user. +- compatible: Should be "fsl,imx8qxp-scu-pd". +- #power-domain-cells: Must be 1. Contains the Resource ID used by + SCU commands. See detailed Resource ID list from: - include/dt-bindings/power/imx-rsrc.h -- power-domains: phandle pointing to the parent power domain. + include/dt-bindings/firmware/imx/rsrc.h Clock bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -152,22 +144,9 @@ firmware { ... }; - imx8qx-pm { - compatible = "fsl,scu-pd"; - #address-cells = <1>; - #size-cells = <0>; - - pd_dma: dma-power-domain { - #power-domain-cells = <0>; - - pd_dma_lpuart0: dma-lpuart0@57 { - reg = <SC_R_UART_0>; - #power-domain-cells = <0>; - power-domains = <&pd_dma>; - }; - ... - }; - ... + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; }; }; }; @@ -179,5 +158,5 @@ serial@5a060000 { clocks = <&clk IMX8QXP_UART0_CLK>, <&clk IMX8QXP_UART0_IPG_CLK>; clock-names = "per", "ipg"; - power-domains = <&pd_dma_lpuart0>; + power-domains = <&pd IMX_SC_R_UART_0>; }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index 4e4a3c0ab9ab..de4075413d91 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" + - "mediatek,mt7629-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index f17cfe64255d..6b7e8067e7aa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7629-ethsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 89f4272a1441..417bd83d1378 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -12,6 +12,7 @@ Required Properties: - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt7629-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt index 7fe5dc6097a6..d179a61536f4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-pciesys", "syscon" + - "mediatek,mt7629-pciesys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index 6755514deb80..4c7e478117a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt2712-pericfg", "syscon" - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt7629-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt index d113b8e741f3..30cb645c0e54 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-sgmiisys", "syscon" + - "mediatek,mt7629-sgmiisys", "syscon" - #clock-cells: Must be 1 The SGMIISYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt index b8184da2508c..7cb02c930613 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-ssusbsys", "syscon" + - "mediatek,mt7629-ssusbsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index d849465b8c99..d160c2b4b6fe 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" + - "mediatek,mt7629-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index 117d741a2e4f..951687528efb 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -11,4 +11,4 @@ Required root node properties: MMP2 Brownstone Board Required root node properties: - - compatible = "mrvl,mmp2-brownstone"; + - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; diff --git a/Documentation/devicetree/bindings/arm/nspire.txt b/Documentation/devicetree/bindings/arm/nspire.txt deleted file mode 100644 index 4d08518bd176..000000000000 --- a/Documentation/devicetree/bindings/arm/nspire.txt +++ /dev/null @@ -1,14 +0,0 @@ -TI-NSPIRE calculators - -Required properties: -- compatible: Compatible property value should contain "ti,nspire". - CX models should have "ti,nspire-cx" - Touchpad models should have "ti,nspire-tp" - Clickpad models should have "ti,nspire-clp" - -Example: - -/ { - model = "TI-NSPIRE CX"; - compatible = "ti,nspire-cx"; - ... diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt deleted file mode 100644 index 0df6acacfaea..000000000000 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ /dev/null @@ -1,46 +0,0 @@ -* ARM Primecell Peripherals - -ARM, Ltd. Primecell peripherals have a standard id register that can be used to -identify the peripheral type, vendor, and revision. This value can be used for -driver matching. - -Required properties: - -- compatible : should be a specific name for the peripheral and - "arm,primecell". The specific name will match the ARM - engineering name for the logic block in the form: "arm,pl???" - -Optional properties: - -- arm,primecell-periphid : Value to override the h/w value with -- clocks : From common clock binding. First clock is phandle to clock for apb - pclk. Additional clocks are optional and specific to those peripherals. -- clock-names : From common clock binding. Shall be "apb_pclk" for first clock. -- dmas : From common DMA binding. If present, refers to one or more dma channels. -- dma-names : From common DMA binding, needs to match the 'dmas' property. - Devices with exactly one receive and transmit channel shall name - these "rx" and "tx", respectively. -- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- interrupts : one or more interrupt specifiers -- interrupt-names : names corresponding to the interrupts properties - -Example: - -serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - arm,primecell-periphid = <0x00341011>; - - clocks = <&pclk>; - clock-names = "apb_pclk"; - - dmas = <&dma-controller 4>, <&dma-controller 5>; - dma-names = "rx", "tx"; - - pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; - pinctrl-names = "default","sleep"; - - interrupts = <0 11 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml new file mode 100644 index 000000000000..5aae37f1c563 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/primecell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Primecell Peripherals + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + ARM, Ltd. Primecell peripherals have a standard id register that can be used to + identify the peripheral type, vendor, and revision. This value can be used for + driver matching. + +properties: + compatible: + contains: + const: arm,primecell + description: + Should be a specific name for the peripheral followed by "arm,primecell". + The specific name will match the ARM engineering name for the logic block + in the form "arm,pl???" + + arm,primecell-periphid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Value to override the h/w ID value + clocks: + minItems: 1 + maxItems: 32 + clock-names: + contains: + const: apb_pclk + additionalItems: true +... diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt deleted file mode 100644 index ee532e705d6c..000000000000 --- a/Documentation/devicetree/bindings/arm/qcom.txt +++ /dev/null @@ -1,57 +0,0 @@ -QCOM device tree bindings -------------------------- - -Some qcom based bootloaders identify the dtb blob based on a set of -device properties like SoC and platform and revisions of those components. -To support this scheme, we encode this information into the board compatible -string. - -Each board must specify a top-level board compatible string with the following -format: - - compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" - -The 'SoC' and 'board' elements are required. All other elements are optional. - -The 'SoC' element must be one of the following strings: - - apq8016 - apq8074 - apq8084 - apq8096 - msm8916 - msm8974 - msm8992 - msm8994 - msm8996 - mdm9615 - ipq8074 - sdm845 - -The 'board' element must be one of the following strings: - - cdp - liquid - dragonboard - mtp - sbc - hk01 - -The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> -where the minor number may be omitted when it's zero, i.e. v1.0 is the same -as v1. If all versions of the 'board_version' elements match, then a -wildcard '*' should be used, e.g. 'v*'. - -The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. - -Examples: - - "qcom,msm8916-v1-cdp-pm8916-v2.1" - -A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version -2.1. - - "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" - -A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in -foundry 2. diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml new file mode 100644 index 000000000000..f6316ab66385 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/arm/qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM device tree bindings + +maintainers: + - Stephen Boyd <sboyd@codeaurora.org> + +description: | + Some qcom based bootloaders identify the dtb blob based on a set of + device properties like SoC and platform and revisions of those components. + To support this scheme, we encode this information into the board compatible + string. + + Each board must specify a top-level board compatible string with the following + format: + + compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" + + The 'SoC' and 'board' elements are required. All other elements are optional. + + The 'SoC' element must be one of the following strings: + + apq8016 + apq8074 + apq8084 + apq8096 + msm8916 + msm8974 + msm8992 + msm8994 + msm8996 + mdm9615 + ipq8074 + sdm845 + + The 'board' element must be one of the following strings: + + cdp + liquid + dragonboard + mtp + sbc + hk01 + + The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> + where the minor number may be omitted when it's zero, i.e. v1.0 is the same + as v1. If all versions of the 'board_version' elements match, then a + wildcard '*' should be used, e.g. 'v*'. + + The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. + + Examples: + + "qcom,msm8916-v1-cdp-pm8916-v2.1" + + A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version + 2.1. + + "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" + + A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in + foundry 2. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,apq8016-sbc + - const: qcom,apq8016 + + - items: + - enum: + - qcom,apq8064-cm-qs600 + - qcom,apq8064-ifc6410 + - const: qcom,apq8064 + + - items: + - enum: + - qcom,apq8074-dragonboard + - const: qcom,apq8074 + + - items: + - enum: + - qcom,apq8060-dragonboard + - qcom,msm8660-surf + - const: qcom,msm8660 + + - items: + - enum: + - qcom,apq8084-mtp + - qcom,apq8084-sbc + - const: qcom,apq8084 + + - items: + - enum: + - qcom,msm8960-cdp + - const: qcom,msm8960 + + - items: + - const: qcom,msm8916-mtp/1 + - const: qcom,msm8916-mtp + - const: qcom,msm8916 + + - items: + - const: qcom,msm8996-mtp + + - items: + - const: qcom,ipq4019 + + - items: + - enum: + - qcom,ipq8064-ap148 + - const: qcom,ipq8064 + + - items: + - enum: + - qcom,ipq8074-hk01 + - const: qcom,ipq8074 + +... diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt deleted file mode 100644 index 7b28ee6fee91..000000000000 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ /dev/null @@ -1,11 +0,0 @@ -CSR SiRFprimaII and SiRFmarco device tree bindings. -======================================== - -Required root node properties: - - compatible: - - "sirf,atlas6-cb" : atlas6 "cb" evaluation board - - "sirf,atlas6" : atlas6 device based board - - "sirf,atlas7-cb" : atlas7 "cb" evaluation board - - "sirf,atlas7" : atlas7 device based board - - "sirf,prima2-cb" : prima2 "cb" evaluation board - - "sirf,prima2" : prima2 device based board diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml new file mode 100644 index 000000000000..0b597032c923 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sirf.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sirf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CSR SiRFprimaII and SiRFmarco device tree bindings. + +maintainers: + - Binghua Duan <binghua.duan@csr.com> + - Barry Song <Baohua.Song@csr.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - const: sirf,atlas6-cb + - const: sirf,atlas6 + - items: + - const: sirf,atlas7-cb + - const: sirf,atlas7 + - items: + - const: sirf,prima2-cb + - const: sirf,prima2 +... diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt deleted file mode 100644 index 0d42949df6c2..000000000000 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ /dev/null @@ -1,26 +0,0 @@ -ST SPEAr Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST SPEAr600 SoC shall have the following properties: -Required root node property: -compatible = "st,spear600"; - -Boards with the ST SPEAr300 SoC shall have the following properties: -Required root node property: -compatible = "st,spear300"; - -Boards with the ST SPEAr310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear310"; - -Boards with the ST SPEAr320 SoC shall have the following properties: -Required root node property: -compatible = "st,spear320"; - -Boards with the ST SPEAr1310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1310"; - -Boards with the ST SPEAr1340 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml new file mode 100644 index 000000000000..f6ec731c9531 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/spear.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr Platforms Device Tree Bindings + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + - Stefan Roese <sr@denx.de> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,spear600 + - st,spear300 + - st,spear310 + - st,spear320 + - st,spear1310 + - st,spear1340 +... diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt deleted file mode 100644 index 8d27f6b084c7..000000000000 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ /dev/null @@ -1,23 +0,0 @@ -ST STi Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST STiH415 SoC shall have the following properties: -Required root node property: -compatible = "st,stih415"; - -Boards with the ST STiH416 SoC shall have the following properties: -Required root node property: -compatible = "st,stih416"; - -Boards with the ST STiH407 SoC shall have the following properties: -Required root node property: -compatible = "st,stih407"; - -Boards with the ST STiH410 SoC shall have the following properties: -Required root node property: -compatible = "st,stih410"; - -Boards with the ST STiH418 SoC shall have the following properties: -Required root node property: -compatible = "st,stih418"; - diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml new file mode 100644 index 000000000000..47f9b8eebaa0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sti.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST STi Platforms Device Tree Bindings + +maintainers: + - Patrice Chotard <patrice.chotard@st.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,stih415 + - st,stih416 + - st,stih407 + - st,stih410 + - st,stih418 +... diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt deleted file mode 100644 index c59b15f64346..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ /dev/null @@ -1,65 +0,0 @@ -NVIDIA Tegra device tree bindings -------------------------------------------- - -SoCs -------------------------------------------- - -Each device tree must specify which Tegra SoC it uses, using one of the -following compatible values: - - nvidia,tegra20 - nvidia,tegra30 - nvidia,tegra114 - nvidia,tegra124 - nvidia,tegra132 - nvidia,tegra210 - nvidia,tegra186 - nvidia,tegra194 - -Boards -------------------------------------------- - -Each device tree must specify which one or more of the following -board-specific compatible values: - - ad,medcom-wide - ad,plutux - ad,tamonten - ad,tec - compal,paz00 - compulab,trimslice - nvidia,beaver - nvidia,cardhu - nvidia,cardhu-a02 - nvidia,cardhu-a04 - nvidia,dalmore - nvidia,harmony - nvidia,jetson-tk1 - nvidia,norrin - nvidia,p2371-0000 - nvidia,p2371-2180 - nvidia,p2571 - nvidia,p2771-0000 - nvidia,p2972-0000 - nvidia,roth - nvidia,seaboard - nvidia,tn7 - nvidia,ventana - toradex,apalis_t30 - toradex,apalis_t30-eval - toradex,apalis_t30-v1.1 - toradex,apalis_t30-v1.1-eval - toradex,apalis-tk1 - toradex,apalis-tk1-eval - toradex,apalis-tk1-v1.2 - toradex,apalis-tk1-v1.2-eval - toradex,colibri_t20 - toradex,colibri_t20-eval-v3 - toradex,colibri_t20-iris - toradex,colibri_t30 - toradex,colibri_t30-eval-v3 - -Trusted Foundations -------------------------------------------- -Tegra supports the Trusted Foundation secure monitor. See the -"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml new file mode 100644 index 000000000000..fbcde8a7e067 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra device tree bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - compal,paz00 + - compulab,trimslice + - nvidia,harmony + - nvidia,seaboard + - nvidia,ventana + - const: nvidia,tegra20 + - items: + - enum: + - ad,medcom-wide + - ad,plutux + - ad,tec + - const: ad,tamonten + - const: nvidia,tegra20 + - items: + - enum: + - toradex,colibri_t20-eval-v3 + - toradex,colibri_t20-iris + - const: toradex,colibri_t20 + - const: nvidia,tegra20 + - items: + - enum: + - nvidia,beaver + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,cardhu-a02 + - nvidia,cardhu-a04 + - const: nvidia,cardhu + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval-v1.1 + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30-v1.1 + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - enum: + - toradex,colibri_t30-eval-v3 + - const: toradex,colibri_t30 + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,dalmore + - nvidia,roth + - nvidia,tn7 + - const: nvidia,tegra114 + - items: + - enum: + - nvidia,jetson-tk1 + - nvidia,venice2 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-v1.2-eval + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1-v1.2 + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,norrin + - const: nvidia,tegra132 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,p2371-0000 + - nvidia,p2371-2180 + - nvidia,p2571 + - const: nvidia,tegra210 + - items: + - enum: + - nvidia,p2771-0000 + - const: nvidia,tegra186 + - items: + - enum: + - nvidia,p2972-0000 + - const: nvidia,tegra194 diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml new file mode 100644 index 000000000000..e372b43da62f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/nspire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE calculators + +maintainers: + - Daniel Tang <dt.tangr@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + # CX models + - ti,nspire-cx + # Touchpad models + - ti,nspire-tp + # Clickpad models + - ti,nspire-clp +... diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml new file mode 100644 index 000000000000..4326d2cfa15d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/davinci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DaVinci Platforms Device Tree Bindings + +maintainers: + - Sekhar Nori <nsekhar@ti.com> + +description: + DA850/OMAP-L138/AM18x based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ti,da850-evm # DA850/OMAP-L138/AM18x Evaluation Module (EVM) board + - ti,da850-lcdk # DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board + - enbw,cmc # EnBW AM1808 based CMC board + - lego,ev3 # LEGO MINDSTORMS EV3 (AM1808 based) + - const: ti,da850 +... diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt deleted file mode 100644 index 87dc1ddf4770..000000000000 --- a/Documentation/devicetree/bindings/arm/vt8500.txt +++ /dev/null @@ -1,22 +0,0 @@ -VIA/Wondermedia VT8500 Platforms Device Tree Bindings ---------------------------------------- - -Boards with the VIA VT8500 SoC shall have the following properties: -Required root node property: -compatible = "via,vt8500"; - -Boards with the Wondermedia WM8505 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8505"; - -Boards with the Wondermedia WM8650 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8650"; - -Boards with the Wondermedia WM8750 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8750"; - -Boards with the Wondermedia WM8850 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8850"; diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml new file mode 100644 index 000000000000..7b25b6fa34e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vt8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings + +maintainers: + - Tony Prisk <linux@prisktech.co.nz> +description: test + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - via,vt8500 + - wm,wm8505 + - wm,wm8650 + - wm,wm8750 + - wm,wm8850 diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt deleted file mode 100644 index 26fe5ecc4332..000000000000 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Xilinx Zynq Platforms Device Tree Bindings - -Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynq-7000"; - -Additional compatible strings: - -- Adapteva Parallella board - "adapteva,parallella" - -- Avnet MicroZed board - "avnet,zynq-microzed" - "xlnx,zynq-microzed" - -- Avnet ZedBoard board - "avnet,zynq-zed" - "xlnx,zynq-zed" - -- Digilent Zybo board - "digilent,zynq-zybo" - -- Digilent Zybo Z7 board - "digilent,zynq-zybo-z7" - -- Xilinx CC108 internal board - "xlnx,zynq-cc108" - -- Xilinx ZC702 internal board - "xlnx,zynq-zc702" - -- Xilinx ZC706 internal board - "xlnx,zynq-zc706" - -- Xilinx ZC770 internal board, with different FMC cards - "xlnx,zynq-zc770-xm010" - "xlnx,zynq-zc770-xm011" - "xlnx,zynq-zc770-xm012" - "xlnx,zynq-zc770-xm013" - ---------------------------------------------------------------- - -Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings - -Boards with ZynqMP SOC based on an ARM Cortex A53 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynqmp"; - - -Additional compatible strings: - -- Xilinx internal board zc1232 - "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232" - -- Xilinx internal board zc1254 - "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254" - -- Xilinx internal board zc1275 - "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275" - -- Xilinx internal board zc1751 - "xlnx,zynqmp-zc1751" - -- Xilinx 96boards compatible board zcu100 - "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" - -- Xilinx evaluation board zcu102 - "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102" - -- Xilinx evaluation board zcu104 - "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104" - -- Xilinx evaluation board zcu106 - "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106" - -- Xilinx evaluation board zcu111 - "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111" diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml new file mode 100644 index 000000000000..c73b1f5c7f49 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Platforms Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +description: | + Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - adapteva,parallella + - digilent,zynq-zybo + - digilent,zynq-zybo-z7 + - xlnx,zynq-cc108 + - xlnx,zynq-zc702 + - xlnx,zynq-zc706 + - xlnx,zynq-zc770-xm010 + - xlnx,zynq-zc770-xm011 + - xlnx,zynq-zc770-xm012 + - xlnx,zynq-zc770-xm013 + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-microzed + - const: xlnx,zynq-microzed + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-zed + - const: xlnx,zynq-zed + - const: xlnx,zynq-7000 + + - items: + - enum: + - xlnx,zynqmp-zc1751 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1232 + items: + - const: xlnx,zynqmp-zc1232-revA + - const: xlnx,zynqmp-zc1232 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1254 + items: + - const: xlnx,zynqmp-zc1254-revA + - const: xlnx,zynqmp-zc1254 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1275 + items: + - const: xlnx,zynqmp-zc1275-revA + - const: xlnx,zynqmp-zc1275 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board zcu100 + items: + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board Ultra96 + items: + - const: avnet,ultra96-rev1 + - const: avnet,ultra96 + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu102 + items: + - enum: + - xlnx,zynqmp-zcu102-revA + - xlnx,zynqmp-zcu102-revB + - xlnx,zynqmp-zcu102-rev1.0 + - const: xlnx,zynqmp-zcu102 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu104 + items: + - enum: + - xlnx,zynqmp-zcu104-revA + - xlnx,zynqmp-zcu104-rev1.0 + - const: xlnx,zynqmp-zcu104 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu106 + items: + - enum: + - xlnx,zynqmp-zcu106-revA + - xlnx,zynqmp-zcu106-rev1.0 + - const: xlnx,zynqmp-zcu106 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu111 + items: + - enum: + - xlnx,zynqmp-zcu111-revA + - xlnx,zynqmp-zcu11-rev1.0 + - const: xlnx,zynqmp-zcu111 + - const: xlnx,zynqmp + +... diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt deleted file mode 100644 index 340612794a37..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.txt +++ /dev/null @@ -1,14 +0,0 @@ -ZTE platforms device tree bindings - ---------------------------------------- -- ZX296702 board: - Required root node properties: - - compatible = "zte,zx296702-ad1", "zte,zx296702" - ---------------------------------------- -- ZX296718 SoC: - Required root node properties: - - compatible = "zte,zx296718" - -ZX296718 EVB board: - - "zte,zx296718-evb" diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml new file mode 100644 index 000000000000..2d3fefdccdff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/zte.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/zte.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ZTE platforms device tree bindings + +maintainers: + - Jun Nie <jun.nie@linaro.org> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - zte,zx296702-ad1 + - const: zte,zx296702 + - items: + - enum: + - zte,zx296718-evb + - const: zte,zx296718 + +... diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt index 87dfb33fb3be..b9d533717dff 100644 --- a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt +++ b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt @@ -1,11 +1,14 @@ -Device tree bindings for Allwinner A64 DE2 bus +Device tree bindings for Allwinner DE2/3 bus The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C) -to be claimed for enabling the access. +to be claimed for enabling the access. The DE3 on Allwinner H6 is at the same +situation, and the binding also applies. Required properties: - - compatible: Should contain "allwinner,sun50i-a64-de2" + - compatible: Should be one of: + - "allwinner,sun50i-a64-de2" + - "allwinner,sun50i-h6-de3", "allwinner,sun50i-a64-de2" - reg: A resource specifier for the register space - #address-cells: Must be set to 1 - #size-cells: Must be set to 1 diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index b455c5aa9139..4d94091c1d2d 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -9,15 +9,13 @@ Required Properties: - "amlogic,meson8-clkc" for Meson8 (S802) SoCs - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs -- reg: it must be composed by two tuples: - 0) physical base address of the xtal register and length of memory - mapped region. - 1) physical base address of the clock controller and length of memory - mapped region. - - #clock-cells: should be 1. - #reset-cells: should be 1. +Parent node should have the following properties : +- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" +- reg: base address and size of the HHI system control register space. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be @@ -30,9 +28,8 @@ device tree sources). Example: Clock controller node: - clkc: clock-controller@c1104000 { + clkc: clock-controller { compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 2ec489eebe72..b646bbcf7f92 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -168,3 +168,19 @@ a shared clock is forbidden. Configuration of common clocks, which affect multiple consumer devices can be similarly specified in the clock provider node. + +==Protected clocks== + +Some platforms or firmwares may not fully expose all the clocks to the OS, such +as in situations where those clks are used by drivers running in ARM secure +execution levels. Such a configuration can be specified in device tree with the +protected-clocks property in the form of a clock specifier list. This property should +only be specified in the node that is providing the clocks being protected: + + clock-controller@a000f000 { + compatible = "vendor,clk95; + reg = <0xa000f000 0x1000> + #clocks-cells = <1>; + ... + protected-clocks = <UART3_CLK>, <SPI5_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index e1308346e00d..13d36d4c6991 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -13,6 +13,9 @@ Optional properties: management IC (PMIC) triggered via PMIC_STBY_REQ signal. Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should be using "syscon-poweroff" driver instead. +- clocks: list of clock specifiers, must contain an entry for each entry + in clock-names +- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt new file mode 100644 index 000000000000..a4f8cd478f92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt @@ -0,0 +1,104 @@ +* Clock bindings for Freescale i.MX7ULP + +i.MX7ULP Clock functions are under joint control of the System +Clock Generation (SCG) modules, Peripheral Clock Control (PCC) +modules, and Core Mode Controller (CMC)1 blocks + +The clocking scheme provides clear separation between M4 domain +and A7 domain. Except for a few clock sources shared between two +domains, such as the System Oscillator clock, the Slow IRC (SIRC), +and and the Fast IRC clock (FIRCLK), clock sources and clock +management are separated and contained within each domain. + +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + +Note: this binding doc is only for A7 clock domain. + +System Clock Generation (SCG) modules: +--------------------------------------------------------------------- +The System Clock Generation (SCG) is responsible for clock generation +and distribution across this device. Functions performed by the SCG +include: clock reference selection, generation of clock used to derive +processor, system, peripheral bus and external memory interface clocks, +source selection for peripheral clocks and control of power saving +clock gating mode. + +Required properties: + +- compatible: Should be "fsl,imx7ulp-scg1". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "rosc", "sosc", "sirc", "firc", "upll", "mpll". + +Peripheral Clock Control (PCC) modules: +--------------------------------------------------------------------- +The Peripheral Clock Control (PCC) is responsible for clock selection, +optional division and clock gating mode for peripherals in their +respected power domain + +Required properties: +- compatible: Should be one of: + "fsl,imx7ulp-pcc2", + "fsl,imx7ulp-pcc3". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", + "apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk", + "mpll", "firc_bus_clk", "rosc", "spll_bus_clk"; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See include/dt-bindings/clock/imx7ulp-clock.h +for the full list of i.MX7ULP clock IDs of each module. + +Examples: + +#include <dt-bindings/clock/imx7ulp-clock.h> + +scg1: scg1@403e0000 { + compatible = "fsl,imx7ulp-scg1; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; +}; + +pcc2: pcc2@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; +}; + +usdhc1: usdhc@40380000 { + compatible = "fsl,imx7ulp-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + bus-width = <4>; +}; diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt new file mode 100644 index 000000000000..52de8263e012 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt @@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "fsl,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt new file mode 100644 index 000000000000..965cfa42e025 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt @@ -0,0 +1,51 @@ +* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +The Low-Power Clock Gate (LPCG) modules contain a local programming +model to control the clock gates for the peripherals. An LPCG module +is used to locally gate the clocks for the associated peripheral. + +Note: +This level of clock gating is provided after the clocks are generated +by the SCU resources and clock controls. Thus even if the clock is +enabled by these control bits, it might still not be running based +on the base resource. + +Required properties: +- compatible: Should be one of: + "fsl,imx8qxp-lpcg-adma", + "fsl,imx8qxp-lpcg-conn", + "fsl,imx8qxp-lpcg-dc", + "fsl,imx8qxp-lpcg-dsp", + "fsl,imx8qxp-lpcg-gpu", + "fsl,imx8qxp-lpcg-hsio", + "fsl,imx8qxp-lpcg-img", + "fsl,imx8qxp-lpcg-lsio", + "fsl,imx8qxp-lpcg-vpu" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See the full list of clock IDs from: +include/dt-bindings/clock/imx8qxp-clock.h + +Examples: + +#include <dt-bindings/clock/imx8qxp-clock.h> + +conn_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; +}; + +usdhc1: mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; +}; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 52d9345c9927..8661c3cd3ccf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -35,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be part of the GCC/clock-controller node. For more details on the TSENS properties please refer Documentation/devicetree/bindings/thermal/qcom-tsens.txt +- protected-clocks : Protected clock specifier list as per common clock + binding. Example: clock-controller@900000 { @@ -55,3 +57,17 @@ Example of GCC with TSENS properties: #reset-cells = <1>; #thermal-sensor-cells = <1>; }; + +Example of GCC with protected-clocks properties: + clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt new file mode 100644 index 000000000000..4e5215ef1acd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt @@ -0,0 +1,22 @@ +Qualcomm Graphics Clock & Reset Controller Binding +-------------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-gpucc" +- reg : shall contain base register location and length +- #clock-cells : from common clock binding, shall contain 1 +- #reset-cells : from common reset binding, shall contain 1 +- #power-domain-cells : from generic power domain binding, shall contain 1 +- clocks : shall contain the XO clock +- clock-names : shall be "xo" + +Example: + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0x5090000 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt new file mode 100644 index 000000000000..b9e9787045b9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt @@ -0,0 +1,26 @@ +Qualcomm LPASS Clock Controller Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-lpasscc" +- #clock-cells : from common clock binding, shall contain 1. +- reg : shall contain base register address and size, + in the order + Index-0 maps to LPASS_CC register region + Index-1 maps to LPASS_QDSP6SS register region + +Optional properties : +- reg-names : register names of LPASS domain + "cc", "qdsp6ss". + +Example: + +The below node has to be defined in the cases where the LPASS peripheral loader +would bring the subsystem out of reset. + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0x17014000 0x1f004>, <0x17300000 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 4491d1c104aa..87b4949e9bc8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt index e7c035afa778..8a8622c65c5a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.txt @@ -6,8 +6,6 @@ Required properties : - reg : shall contain base register location and length - #clock-cells : from common clock binding, shall contain 1. - #power-domain-cells : from generic power domain binding, shall contain 1. - -Optional properties : - #reset-cells : from common reset binding, shall contain 1. Example: @@ -16,4 +14,5 @@ Example: reg = <0xab00000 0x10000>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 97f46adac85f..c655f28d5918 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -28,6 +28,12 @@ Required properties: * "fsl,p4080-clockgen" * "fsl,p5020-clockgen" * "fsl,p5040-clockgen" + * "fsl,t1023-clockgen" + * "fsl,t1024-clockgen" + * "fsl,t1040-clockgen" + * "fsl,t1042-clockgen" + * "fsl,t2080-clockgen" + * "fsl,t2081-clockgen" * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt index e94582e8b8a9..41a52c2acffd 100644 --- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -1,5 +1,5 @@ -Allwinner Display Engine 2.0 Clock Control Binding --------------------------------------------------- +Allwinner Display Engine 2.0/3.0 Clock Control Binding +------------------------------------------------------ Required properties : - compatible: must contain one of the following compatibles: @@ -8,6 +8,7 @@ Required properties : - "allwinner,sun8i-v3s-de2-clk" - "allwinner,sun50i-a64-de2-clk" - "allwinner,sun50i-h5-de2-clk" + - "allwinner,sun50i-h6-de3-clk" - reg: Must contain the registers base address and length - clocks: phandle to the clocks feeding the display engine subsystem. diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 47d2e902ced4..e3bd88ae456b 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -22,6 +22,7 @@ Required properties : - "allwinner,sun50i-h5-ccu" - "allwinner,sun50i-h6-ccu" - "allwinner,sun50i-h6-r-ccu" + - "allwinner,suniv-f1c100s-ccu" - "nextthing,gr8-ccu" - reg: Must contain the registers base address and length diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index d90e17e2428b..a9a2f2fc44f2 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -14,6 +14,8 @@ Optional properties: - label: symbolic name for the connector, - type: size of the connector, should be specified in case of USB-A, USB-B non-fullsize connectors: "mini", "micro". +- self-powered: Set this property if the usb device that has its own power + source. Optional properties for usb-c-connector: - power-role: should be one of "source", "sink" or "dual"(DRP) if typec diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt new file mode 100644 index 000000000000..33856947c561 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -0,0 +1,172 @@ +Qualcomm Technologies, Inc. CPUFREQ Bindings + +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) +SoCs to manage frequency in hardware. It is capable of controlling frequency +for multiple clusters. + +Properties: +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,cpufreq-hw". + +- clocks + Usage: required + Value type: <phandle> From common clock binding. + Definition: clock handle for XO clock and GPLL0 clock. + +- clock-names + Usage: required + Value type: <string> From common clock binding. + Definition: must be "xo", "alternate". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: Addresses and sizes for the memory of the HW bases in + each frequency domain. +- reg-names + Usage: Optional + Value type: <string> + Definition: Frequency domain name i.e. + "freq-domain0", "freq-domain1". + +- #freq-domain-cells: + Usage: required. + Definition: Number of cells in a freqency domain specifier. + +* Property qcom,freq-domain +Devices supporting freq-domain must set their "qcom,freq-domain" property with +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. + + +Example: + +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch +DCVS state together. + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; +} diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt index 999fb2a810f6..6130e6eb4af8 100644 --- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt +++ b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt @@ -1,8 +1,12 @@ Arm TrustZone CryptoCell cryptographic engine Required properties: -- compatible: Should be one of: "arm,cryptocell-712-ree", - "arm,cryptocell-710-ree" or "arm,cryptocell-630p-ree". +- compatible: Should be one of - + "arm,cryptocell-713-ree" + "arm,cryptocell-703-ree" + "arm,cryptocell-712-ree" + "arm,cryptocell-710-ree" + "arm,cryptocell-630p-ree" - reg: Base physical address of the engine and length of memory mapped region. - interrupts: Interrupt number for the device. diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt index 76a0b4e80e83..4e4d387e38a5 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -6,6 +6,8 @@ Required properties: - interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ must be supplied, optionally Secure IRQ can be present, but is currently not implemented and not used. +- clocks : Clock reference (only required on some SOCs: 6ull and 6sll). +- clock-names : Must be "dcp". Example: diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt index 057b81335775..c65fd7a7467c 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt @@ -67,6 +67,8 @@ Required properties: Optional properties: - power-domains: Optional phandle to associated power domain as described in the file ../power/power_domain.txt +- amlogic,canvas: phandle to canvas provider node as described in the file + ../soc/amlogic/amlogic,canvas.txt Required nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index 3aeb0ec06fd0..ba5469dd09f3 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders + - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt new file mode 100644 index 000000000000..e641f664763d --- /dev/null +++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt @@ -0,0 +1,26 @@ +Himax HX8357D display panels + +This binding is for display panels using a Himax HX8357D controller in SPI +mode, such as the Adafruit 3.5" TFT for Raspberry Pi. + +Required properties: +- compatible: "adafruit,yx350hv15", "himax,hx8357d" +- dc-gpios: D/C pin +- reg: address of the panel on the SPI bus + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx350hv15", "himax,hx8357d"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <90>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index dfc743219bd8..9ae946942720 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -106,6 +106,7 @@ Required properties: - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: * "iface" + * "ref" (only required for new DTS files/entries) For 28nm HPM/LP, 28nm 8960 PHYs: - vddio-supply: phandle to vdd-io regulator device node For 20nm PHY: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 43fac0fe09bb..ac8df3b871f9 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,11 +1,13 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or + "amd,imageon-XYZ.W", "amd,imageon" for example: "qcom,adreno-306.0", "qcom,adreno" Note that you need to list the less specific "qcom,adreno" (since this is what the device is matched on), in addition to the more specific with the chip-id. + If "amd,imageon" is used, there should be no top level msm device. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. - clocks: device clocks diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt index 3c341a15ccdc..b07eeb38f709 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt @@ -38,6 +38,8 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: * "lut_clk" +- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be + used for LCDC. This is only valid for 18bpp panels. Example: diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt new file mode 100644 index 000000000000..35bc0c839f49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt @@ -0,0 +1,12 @@ +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel + +Required properties: +- compatible: should be "bananapi,s070wv20-ct16" +- power-supply: see ./panel-common.txt + +Optional properties: +- enable-gpios: see ./simple-panel.txt +- backlight: see ./simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in ./simple-panel.txt. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt new file mode 100644 index 000000000000..057f7f3f6dbe --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s043wq26h-ct7" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt new file mode 100644 index 000000000000..505615dfa0df --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s070wv95-ct16" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt new file mode 100644 index 000000000000..fbf5dcd15661 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt @@ -0,0 +1,12 @@ +DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + +Required properties: +- compatible: should be "dlc,dlc1010gig" +- power-supply: See simple-panel.txt + +Optional properties: +- enable-gpios: See simple-panel.txt +- backlight: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt new file mode 100644 index 000000000000..a89f9c830a85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt @@ -0,0 +1,42 @@ +Binding for Olimex Ltd. LCD-OLinuXino bridge panel. + +This device can be used as bridge between a host controller and LCD panels. +Currently supported LCDs are: + - LCD-OLinuXino-4.3TS + - LCD-OLinuXino-5 + - LCD-OLinuXino-7 + - LCD-OLinuXino-10 + +The panel itself contains: + - AT24C16C EEPROM holding panel identification and timing requirements + - AR1021 resistive touch screen controller (optional) + - FT5x6 capacitive touch screnn controller (optional) + - GT911/GT928 capacitive touch screen controller (optional) + +The above chips share same I2C bus. The EEPROM is factory preprogrammed with +device information (id, serial, etc.) and timing requirements. + +Touchscreen bingings can be found in these files: + - input/touchscreen/goodix.txt + - input/touchscreen/edt-ft5x06.txt + - input/touchscreen/ar1021.txt + +Required properties: + - compatible: should be "olimex,lcd-olinuxino" + - reg: address of the configuration EEPROM, should be <0x50> + - power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: + - enable-gpios: GPIO pin to enable or disable the panel + - backlight: phandle of the backlight device attacked to the panel + +Example: +&i2c2 { + panel@50 { + compatible = "olimex,lcd-olinuxino"; + reg = <0x50>; + power-supply = <®_vcc5v0>; + enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt new file mode 100644 index 000000000000..b94e366f451b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt @@ -0,0 +1,30 @@ +Samsung S6D16D0 4" 864x480 AMOLED panel + +Required properties: + - compatible: should be: + "samsung,s6d16d0", + - reg: the virtual channel number of a DSI peripheral + - vdd1-supply: I/O voltage supply + - reset-gpios: a GPIO spec for the reset pin (active low) + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt index f5e3c6f2095a..40f3d7c713bb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt @@ -1,47 +1,70 @@ TPO TPG110 Panel ================ -This binding builds on the DPI bindings, adding a few properties -as a superset of a DPI. See panel-dpi.txt for the required DPI -bindings. +This panel driver is a component that acts as an intermediary +between an RGB output and a variety of panels. The panel +driver is strapped up in electronics to the desired resolution +and other properties, and has a control interface over 3WIRE +SPI. By talking to the TPG110 over SPI, the strapped properties +can be discovered and the hardware is therefore mostly +self-describing. + + +--------+ +SPI -> | TPO | -> physical display +RGB -> | TPG110 | + +--------+ + +If some electrical strap or alternate resolution is desired, +this can be set up by taking software control of the display +over the SPI interface. The interface can also adjust +for properties of the display such as gamma correction and +certain electrical driving levels. + +The TPG110 does not know the physical dimensions of the panel +connected, so this needs to be specified in the device tree. + +It requires a GPIO line for control of its reset line. + +The serial protocol has line names that resemble I2C but the +protocol is not I2C but 3WIRE SPI. Required properties: -- compatible : "tpo,tpg110" +- compatible : one of: + "ste,nomadik-nhk15-display", "tpo,tpg110" + "tpo,tpg110" - grestb-gpios : panel reset GPIO -- scen-gpios : serial control enable GPIO -- scl-gpios : serial control clock line GPIO -- sda-gpios : serial control data line GPIO +- width-mm : see display/panel/panel-common.txt +- height-mm : see display/panel/panel-common.txt + +The device needs to be a child of an SPI bus, see +spi/spi-bus.txt. The SPI child must set the following +properties: +- spi-3wire +- spi-max-frequency = <3000000>; +as these are characteristics of this device. -Required nodes: -- Video port for DPI input, see panel-dpi.txt -- Panel timing for DPI setup, see panel-dpi.txt +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. Example ------- -panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; +panel: display@0 { + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&foo_gpio 5 GPIO_ACTIVE_LOW>; backlight = <&bl>; port { nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; + remote-endpoint = <&foo>; }; }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 9de67be632d1..3c855d9f2719 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -4,7 +4,9 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU + - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -52,7 +54,9 @@ corresponding to each DU output. Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index adc94fc3c9f8..39143424a474 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -13,6 +13,7 @@ Required properties: - compatible: should be one of the following: "rockchip,rk3288-dw-hdmi" + "rockchip,rk3328-dw-hdmi" "rockchip,rk3399-dw-hdmi" - reg: See dw_hdmi.txt. - reg-io-width: See dw_hdmi.txt. Shall be 4. @@ -34,6 +35,8 @@ Optional properties - clock-names: May contain "cec" as defined in dw_hdmi.txt. - clock-names: May contain "grf", power for grf io. - clock-names: May contain "vpll", external clock for some hdmi phy. +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "hdmi" if phys references an external phy. Example: diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 7854fff4fc16..f426bdb42f18 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -79,6 +79,7 @@ Required properties: - compatible: value must be one of: * "allwinner,sun8i-a83t-dw-hdmi" * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" + * "allwinner,sun50i-h6-dw-hdmi" - reg: base address and size of memory-mapped region - reg-io-width: See dw_hdmi.txt. Shall be 1. - interrupts: HDMI interrupt number @@ -86,9 +87,14 @@ Required properties: * iahb: the HDMI bus clock * isfr: the HDMI register clock * tmds: TMDS clock + * cec: HDMI CEC clock (H6 only) + * hdcp: HDCP clock (H6 only) + * hdcp-bus: HDCP bus clock (H6 only) - clock-names: the clock names mentioned above - - resets: phandle to the reset controller - - reset-names: must be "ctrl" + - resets: + * ctrl: HDMI controller reset + * hdcp: HDCP reset (H6 only) + - reset-names: reset names mentioned above - phys: phandle to the DWC HDMI PHY - phy-names: must be "phy" @@ -109,6 +115,7 @@ Required properties: * allwinner,sun8i-h3-hdmi-phy * allwinner,sun8i-r40-hdmi-phy * allwinner,sun50i-a64-hdmi-phy + * allwinner,sun50i-h6-hdmi-phy - reg: base address and size of memory-mapped region - clocks: phandles to the clocks feeding the HDMI PHY * bus: the HDMI PHY interface clock @@ -158,6 +165,7 @@ Required properties: * allwinner,sun9i-a80-tcon-tv * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" + * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. @@ -220,24 +228,26 @@ It allows display pipeline to be configured in very different ways: \ [3] TCON-TV1 [1] - TVE1/RGB Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. +connected to any TCON. Not all TCON TOP variants support all features. Required properties: - compatible: value must be one of: * allwinner,sun8i-r40-tcon-top + * allwinner,sun50i-h6-tcon-top - reg: base address and size of the memory-mapped region. - clocks: phandle to the clocks feeding the TCON TOP * bus: TCON TOP interface clock * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock - * tcon-tv1: TCON TV1 clock - * tve1: TVE0 clock - * dsi: MIPI DSI clock + * tve0: TVE0 clock (R40 only) + * tcon-tv1: TCON TV1 clock (R40 only) + * tve1: TVE0 clock (R40 only) + * dsi: MIPI DSI clock (R40 only) - clock-names: clock name mentioned above - resets: phandle to the reset line driving the TCON TOP - #clock-cells : must contain 1 - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock and DSI channel clock, in that order. + TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in + that order. - ports: A ports node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should @@ -381,6 +391,7 @@ Required properties: * allwinner,sun8i-v3s-de2-mixer * allwinner,sun50i-a64-de2-mixer-0 * allwinner,sun50i-a64-de2-mixer-1 + * allwinner,sun50i-h6-de3-mixer-0 - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer * bus: the mixer interface clock @@ -415,9 +426,10 @@ Required properties: * allwinner,sun8i-v3s-display-engine * allwinner,sun9i-a80-display-engine * allwinner,sun50i-a64-display-engine + * allwinner,sun50i-h6-display-engine - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0) available. + frontends (DE 1.0) or mixers (DE 2.0/3.0) available. Example: diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt new file mode 100644 index 000000000000..f39c77ee36ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt @@ -0,0 +1,59 @@ +Truly model NT35597 DSI display driver + +The Truly NT35597 is a generic display driver, currently only configured +for use in the 2K display on the Qualcomm SDM845 MTP board. + +Required properties: +- compatible: should be "truly,nt35597-2K-display" +- vdda-supply: phandle of the regulator that provides the supply voltage + Power IC supply +- vdispp-supply: phandle of the regulator that provides the supply voltage + for positive LCD bias +- vdispn-supply: phandle of the regulator that provides the supply voltage + for negative LCD bias +- reset-gpios: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names + (active low) +- mode-gpios: phandle of the gpio for choosing the mode of the display + for single DSI or Dual DSI + This should be low for dual DSI and high for single DSI mode +- ports: This device has two video ports driven by two DSIs. Their connections + are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + - port@0: DSI input port driven by master DSI + - port@1: DSI input port driven by secondary DSI + +Example: + + dsi@ae94000 { + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&pm8998_l14>; + vdispp-supply = <&lab_regulator>; + vdispn-supply = <&ibb_regulator>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&dpu_dsi_active>; + pinctrl-1 = <&dpu_dsi_suspend>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt new file mode 100644 index 000000000000..3fe0961bcf64 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt @@ -0,0 +1,33 @@ +* Mediatek UART APDMA Controller + +Required properties: +- compatible should contain: + * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA + * "mediatek,mt6577-uart-dma" for MT6577 and all of the above + +- reg: The base address of the APDMA register bank. + +- interrupts: A single interrupt specifier. + +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: The APDMA clock for register accesses + +Examples: + + apdma: dma-controller@11000380 { + compatible = "mediatek,mt2712-uart-dma"; + reg = <0 0x11000380 0 0x400>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_AP_DMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml new file mode 100644 index 000000000000..9175d67f355d --- /dev/null +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +# All the top-level keys are standard json-schema keywords except for +# 'maintainers' and 'select' + +# $id is a unique idenifier based on the filename. There may or may not be a +# file present at the URL. +$id: "http://devicetree.org/schemas/example-schema.yaml#" +# $schema is the meta-schema this schema should be validated with. +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: An example schema annotated with jsonschema details + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + A more detailed multi-line description of the binding. + + Details about the hardware device and any links to datasheets can go here. + + Literal blocks are marked with the '|' at the beginning. The end is marked by + indentation less than the first line of the literal block. Lines also cannot + begin with a tab character. + +select: false + # 'select' is a schema applied to a DT node to determine if this binding + # schema should be applied to the node. It is optional and by default the + # possible compatible strings are extracted and used to match. + + # In this case, a 'false' schema will never match. + +properties: + # A dictionary of DT properties for this binding schema + compatible: + # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND) + # to handle different conditions. + # In this case, it's needed to handle a variable number of values as there + # isn't another way to express a constraint of the last string value. + # The boolean schema must be a list of schemas. + oneOf: + - items: + # items is a list of possible values for the property. The number of + # values is determined by the number of elements in the list. + # Order in lists is significant, order in dicts is not + # Must be one of the 1st enums followed by the 2nd enum + # + # Each element in items should be 'enum' or 'const' + - enum: + - vendor,soc4-ip + - vendor,soc3-ip + - vendor,soc2-ip + - enum: + - vendor,soc1-ip + # additionalItems being false is implied + # minItems/maxItems equal to 2 is implied + - items: + # 'const' is just a special case of an enum with a single possible value + - const: vendor,soc1-ip + + reg: + # The core schema already checks that reg values are numbers, so device + # specific schema don't need to do those checks. + # The description of each element defines the order and implicitly defines + # the number of reg entries. + items: + - description: core registers + - description: aux registers + # minItems/maxItems equal to 2 is implied + + reg-names: + # The core schema enforces this is a string array + items: + - const: core + - const: aux + + clocks: + # Cases that have only a single entry just need to express that with maxItems + maxItems: 1 + description: bus clock + + clock-names: + items: + - const: bus + + interrupts: + # Either 1 or 2 interrupts can be present + minItems: 1 + maxItems: 2 + items: + - description: tx or combined interrupt + - description: rx interrupt + description: + A variable number of interrupts warrants a description of what conditions + affect the number of interrupts. Otherwise, descriptions on standard + properties are not necessary. + + interrupt-names: + # minItems must be specified here because the default would be 2 + minItems: 1 + maxItems: 2 + items: + - const: tx irq + - const: rx irq + + # Property names starting with '#' must be quoted + '#interrupt-cells': + # A simple case where the value must always be '2'. + # The core schema handles that this must be a single integer. + const: 2 + + interrupt-controller: true + # The core checks this is a boolean, so just have to list it here to be + # valid for this binding. + + clock-frequency: + # The type is set in the core schema. Per device schema only need to set + # constraints on the possible values. + minimum: 100 + maximum: 400000 + # The value that should be used if the property is not present + default: 200 + + foo-gpios: + maxItems: 1 + description: A connection of the 'foo' gpio line. + + vendor,int-property: + description: Vendor specific properties must have a description + # 'allOf' is the json-schema way of subclassing a schema. Here the base + # type schema is referenced and then additional constraints on the values + # are added. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [2, 4, 6, 8, 10] + + vendor,bool-property: + description: Vendor specific properties must have a description + # boolean properties is one case where the json-schema 'type' keyword + # can be used directly + type: boolean + + vendor,string-array-property: + description: Vendor specific properties should reference a type in the + core schema. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - items: + - enum: [ foo, bar ] + - enum: [ baz, boo ] + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +examples: + # Examples are now compiled with dtc + - | + node@1000 { + compatible = "vendor,soc4-ip", "vendor,soc1-ip"; + reg = <0x1000 0x80>, + <0x3000 0x80>; + reg-names = "core", "aux"; + interrupts = <10>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt new file mode 100644 index 000000000000..1fa66065acc6 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt @@ -0,0 +1,57 @@ +Intel Service Layer Driver for Stratix10 SoC +============================================ +Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard +processor system (HPS) and Secure Device Manager (SDM). When the FPGA is +configured from HPS, there needs to be a way for HPS to notify SDM the +location and size of the configuration data. Then SDM will get the +configuration data from that location and perform the FPGA configuration. + +To meet the whole system security needs and support virtual machine requesting +communication with SDM, only the secure world of software (EL3, Exception +Layer 3) can interface with SDM. All software entities running on other +exception layers must channel through the EL3 software whenever it needs +service from SDM. + +Intel Stratix10 service layer driver, running at privileged exception level +(EL1, Exception Layer 1), interfaces with the service providers and provides +the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer +driver also manages secure monitor call (SMC) to communicate with secure monitor +code running in EL3. + +Required properties: +------------------- +The svc node has the following mandatory properties, must be located under +the firmware node. + +- compatible: "intel,stratix10-svc" +- method: smc or hvc + smc - Secure Monitor Call + hvc - Hypervisor Call +- memory-region: + phandle to the reserved memory node. See + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + for details + +Example: +------- + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt new file mode 100644 index 000000000000..6e03f79287fb --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt @@ -0,0 +1,17 @@ +Intel Stratix10 SoC FPGA Manager + +Required properties: +The fpga_mgr node has the following mandatory property, must be located under +firmware/svc node. + +- compatible : should contain "intel,stratix10-soc-fpga-mgr" + +Example: + + firmware { + svc { + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt new file mode 100644 index 000000000000..99ca9862a586 --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt @@ -0,0 +1,16 @@ +Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC) +--------------------------------------------------------------------- + +This is the binding for the P9 On-Chip Controller accessed over FSI from a +service processor. See fsi.txt for details on bindings for FSI slave and CFAM +nodes. The OCC is not an FSI slave device itself, rather it is accessed +through the SBE fifo. + +Required properties: + - compatible = "ibm,p9-occ" + +Examples: + + occ { + compatible = "ibm,p9-occ"; + }; diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt new file mode 100644 index 000000000000..706ef00f5c64 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt @@ -0,0 +1,43 @@ +Cadence GPIO controller bindings + +Required properties: +- compatible: should be "cdns,gpio-r1p02". +- reg: the register base address and size. +- #gpio-cells: should be 2. + * first cell is the GPIO number. + * second cell specifies the GPIO flags, as defined in + <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH + and GPIO_ACTIVE_LOW flags are supported. +- gpio-controller: marks the device as a GPIO controller. +- clocks: should contain one entry referencing the peripheral clock driving + the GPIO controller. + +Optional properties: +- ngpios: integer number of gpio lines supported by this controller, up to 32. +- interrupts: interrupt specifier for the controllers interrupt. +- interrupt-controller: marks the device as an interrupt controller. When + defined, interrupts, interrupt-parent and #interrupt-cells + are required. +- interrupt-cells: should be 2. + * first cell is the GPIO number you want to use as an IRQ source. + * second cell specifies the IRQ type, as defined in + <dt-bindings/interrupt-controller/irq.h>. + Currently only level sensitive IRQs are supported. + + +Example: + gpio0: gpio-controller@fd060000 { + compatible = "cdns,gpio-r1p02"; + reg =<0xfd060000 0x1000>; + + clocks = <&gpio_clk>; + + interrupt-parent = <&gic>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index 8d950522e7fa..e57b2cb28f6c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -5,6 +5,8 @@ Required properties: - "ti,omap2-gpio" for OMAP2 controllers - "ti,omap3-gpio" for OMAP3 controllers - "ti,omap4-gpio" for OMAP4 controllers +- reg : Physical base address of the controller and length of memory mapped + region. - gpio-controller : Marks the device node as a GPIO controller. - #gpio-cells : Should be two. - first cell is the pin number @@ -18,6 +20,8 @@ Required properties: 2 = high-to-low edge triggered. 4 = active high level-sensitive. 8 = active low level-sensitive. +- interrupts : The interrupt the controller is rising as output when an + interrupt occures OMAP specific properties: - ti,hwmods: Name of the hwmod associated to the GPIO: @@ -29,11 +33,13 @@ OMAP specific properties: Example: -gpio4: gpio4 { +gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio4"; + reg = <0x44e07000 0x1000>; + ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupts = <96>; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt index 0ccbae44019c..ae254aadee35 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt @@ -24,6 +24,12 @@ Required properties for GPIO node: 4 = active high level-sensitive. 8 = active low level-sensitive. +Optional properties: +-clocks: Must contain an entry for each entry in clock-names. + See common clock-bindings.txt for details. +-clock-names: A list of clock names. For imx7ulp, it must contain + "gpio", "port". + Note: Each GPIO port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt index eb7cdd69e10b..627efc78ecf2 100644 --- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt @@ -3,12 +3,24 @@ NXP LPC18xx/43xx GPIO controller Device Tree Bindings Required properties: - compatible : Should be "nxp,lpc1850-gpio" -- reg : Address and length of the register set for the device -- clocks : Clock specifier (see clock bindings for details) -- gpio-controller : Marks the device node as a GPIO controller. -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify polarity +- reg : List of addresses and lengths of the GPIO controller + register sets +- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and + "gpio-gpoup1-ic" +- clocks : Phandle and clock specifier pair for GPIO controller +- resets : Phandle and reset specifier pair for GPIO controller +- gpio-controller : Marks the device node as a GPIO controller +- #gpio-cells : Should be two: + - The first cell is the GPIO line number + - The second cell is used to specify polarity +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : Should be two: + - The first cell is an interrupt number within + 0..9 range, for GPIO pin interrupts it is equal + to 'nxp,gpio-pin-interrupt' property value of + GPIO pin configuration, 8 is for GPIO GROUP0 + interrupt, 9 is for GPIO GROUP1 interrupt + - The second cell is used to specify interrupt type Optional properties: - gpio-ranges : Mapping between GPIO and pinctrl @@ -19,21 +31,29 @@ Example: gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; - reg = <0x400f4000 0x4000>; + reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, + <0x40088000 0x1000>, <0x40089000 0x1000>; + reg-names = "gpio", "gpio-pin-ic", + "gpio-group0-ic", "gpio-gpoup1-ic"; clocks = <&ccu1 CLK_CPU_GPIO>; + resets = <&rgu 28>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, ... <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; }; gpio_joystick { - compatible = "gpio-keys-polled"; + compatible = "gpio-keys"; ... - button@0 { + button0 { ... + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 2889bbcd7416..f3f2c468c1b6 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller. - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller. + - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller. - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index 7276b50c3506..839dd32ffe11 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -43,7 +43,7 @@ gpio: gpio@20000 { #address-cells = <1>; #size-cells = <0>; - porta: gpio-controller@0 { + porta: gpio@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -55,7 +55,7 @@ gpio: gpio@20000 { interrupts = <0>; }; - portb: gpio-controller@1 { + portb: gpio@1 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000000..1ecd03f3da4d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +}; diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt index 97581266e329..c76a7ac47c34 100644 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ b/Documentation/devicetree/bindings/hwmon/lm90.txt @@ -23,6 +23,7 @@ Required node properties: "onnn,nct1008" "winbond,w83l771" "nxp,sa56004" + "ti,tmp451" - reg: I2C bus address of the device diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index c3b9c4cfe8df..37f18d684f6a 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -4,6 +4,7 @@ NTC Thermistor hwmon sensors Requires node properties: - "compatible" value : one of "epcos,b57330v2103" + "epcos,b57891s0103" "murata,ncp15wb473" "murata,ncp18wb473" "murata,ncp21wb473" diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt index 8c4b10df86d9..54d4beed4ee5 100644 --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt @@ -7,6 +7,10 @@ Requires node properties: - compatible : "ti,tmp108" - reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. +Optional properties: +- interrupts: Reference to the TMP108 alert interrupt. +- #thermal-sensor-cells: should be set to 0. + Example: tmp108@48 { compatible = "ti,tmp108"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt deleted file mode 100644 index 38a05562d1d2..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Device-Tree bindings for i2c gpio driver - -Required properties: - - compatible = "i2c-gpio"; - - sda-gpios: gpio used for the sda signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from <dt-bindings/gpio/gpio.h> since the signal is by definition - open drain. - - scl-gpios: gpio used for the scl signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from <dt-bindings/gpio/gpio.h> since the signal is by definition - open drain. - -Optional properties: - - i2c-gpio,scl-output-only: scl as output only - - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - - i2c-gpio,timeout-ms: timeout to get data - -Deprecated properties, do not use in new device tree sources: - - gpios: sda and scl gpio, alternative for {sda,scl}-gpios - - i2c-gpio,sda-open-drain: this means that something outside of our - control has put the GPIO line used for SDA into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - - i2c-gpio,scl-open-drain: this means that something outside of our - control has put the GPIO line used for SCL into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - -Example nodes: - -#include <dt-bindings/gpio/gpio.h> - -i2c@0 { - compatible = "i2c-gpio"; - sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml new file mode 100644 index 000000000000..da6129090a8e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for GPIO bitbanged I2C + +maintainers: + - Wolfram Sang <wolfram@the-dreams.de> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - const: i2c-gpio + + sda-gpios: + description: + gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + scl-gpios: + description: + gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + i2c-gpio,scl-output-only: + description: scl as output only + type: boolean + + i2c-gpio,delay-us: + description: delay between GPIO operations (may depend on each platform) + $ref: /schemas/types.yaml#/definitions/uint32 + + i2c-gpio,timeout-ms: + description: timeout to get data + $ref: /schemas/types.yaml#/definitions/uint32 + + # Deprecated properties, do not use in new device tree sources: + gpios: + minItems: 2 + maxItems: 2 + description: sda and scl gpio, alternative for {sda,scl}-gpios + + i2c-gpio,sda-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put + the GPIO line used for SDA into open drain mode, and that something is + not the GPIO chip. It is essentially an inconsistency flag. + + i2c-gpio,scl-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put the + GPIO line used for SCL into open drain mode, and that something is not + the GPIO chip. It is essentially an inconsistency flag. + +required: + - compatible + - sda-gpios + - scl-gpios + +... diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt new file mode 100644 index 000000000000..5dc5d2e2573d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt @@ -0,0 +1,25 @@ +Device-tree bindings for I2C-based On-Chip Controller hwmon device +------------------------------------------------------------------ + +Required properties: + - compatible = "ibm,p8-occ-hwmon"; + - reg = <I2C address>; : I2C bus address + +Examples: + + i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + < more properties > + + occ-hwmon@1 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; + + occ-hwmon@2 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt new file mode 100644 index 000000000000..69da2115abdc --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt @@ -0,0 +1,43 @@ +Bindings for cadence I3C master block +===================================== + +Required properties: +-------------------- +- compatible: shall be "cdns,i3c-master" +- clocks: shall reference the pclk and sysclk +- clock-names: shall contain "pclk" and "sysclk" +- interrupts: the interrupt line connected to this I3C master +- reg: I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 1 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@0d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x80000010 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt new file mode 100644 index 000000000000..ab729a0a86ae --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/i3c.txt @@ -0,0 +1,138 @@ +Generic device tree bindings for I3C busses +=========================================== + +This document describes generic bindings that should be used to describe I3C +busses in a device tree. + +Required properties +------------------- + +- #address-cells - should be <3>. Read more about addresses below. +- #size-cells - should be <0>. +- compatible - name of the I3C master controller driving the I3C bus + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. +The node describing an I3C bus should be named i3c-master. + +Optional properties +------------------- + +These properties may not be supported by all I3C master drivers. Each I3C +master bindings should specify which of them are supported. + +- i3c-scl-hz: frequency of the SCL signal used for I3C transfers. + When undefined the core sets it to 12.5MHz. + +- i2c-scl-hz: frequency of the SCL signal used for I2C transfers. + When undefined, the core looks at LVR (Legacy Virtual Register) + values of I2C devices described in the device tree to determine + the maximum I2C frequency. + +I2C devices +=========== + +Each I2C device connected to the bus should be described in a subnode. All +properties described in Documentation/devicetree/bindings/i2c/i2c.txt are +valid here, but several new properties have been added. + +New constraint on existing properties: +-------------------------------------- +- reg: contains 3 cells + + first cell : still encoding the I2C address + + + second cell: shall be 0 + + + third cell: shall encode the I3C LVR (Legacy Virtual Register) + bit[31:8]: unused/ignored + bit[7:5]: I2C device index. Possible values + * 0: I2C device has a 50 ns spike filter + * 1: I2C device does not have a 50 ns spike filter but supports high + frequency on SCL + * 2: I2C device does not have a 50 ns spike filter and is not tolerant + to high frequencies + * 3-7: reserved + + bit[4]: tell whether the device operates in FM (Fast Mode) or FM+ mode + * 0: FM+ mode + * 1: FM mode + + bit[3:0]: device type + * 0-15: reserved + +The I2C node unit-address should always match the first cell of the reg +property: <device-type>@<i2c-address>. + +I3C devices +=========== + +All I3C devices are supposed to support DAA (Dynamic Address Assignment), and +are thus discoverable. So, by default, I3C devices do not have to be described +in the device tree. +This being said, one might want to attach extra resources to these devices, +and those resources may have to be described in the device tree, which in turn +means we have to describe I3C devices. + +Another use case for describing an I3C device in the device tree is when this +I3C device has a static I2C address and we want to assign it a specific I3C +dynamic address before the DAA takes place (so that other devices on the bus +can't take this dynamic address). + +The I3C device should be names <device-type>@<static-i2c-address>,<i3c-pid>, +where device-type is describing the type of device connected on the bus +(gpio-controller, sensor, ...). + +Required properties +------------------- +- reg: contains 3 cells + + first cell : encodes the static I2C address. Should be 0 if the device does + not have one (0 is not a valid I2C address). + + + second and third cells: should encode the ProvisionalID. The second cell + contains the manufacturer ID left-shifted by 1. + The third cell contains ORing of the part ID + left-shifted by 16, the instance ID left-shifted + by 12 and the extra information. This encoding is + following the PID definition provided by the I3C + specification. + +Optional properties +------------------- +- assigned-address: dynamic address to be assigned to this device. This + property is only valid if the I3C device has a static + address (first cell of the reg property != 0). + + +Example: + + i3c-master@d040000 { + compatible = "cdns,i3c-master"; + clocks = <&coreclock>, <&i3csysclock>; + clock-names = "pclk", "sysclk"; + interrupts = <3 0>; + reg = <0x0d040000 0x1000>; + #address-cells = <3>; + #size-cells = <0>; + i2c-scl-hz = <100000>; + + /* I2C device. */ + nunchuk: nunchuk@52 { + compatible = "nintendo,nunchuk"; + reg = <0x52 0x0 0x10>; + }; + + /* I3C device with a static I2C address. */ + thermal_sensor: sensor@68,39200144004 { + reg = <0x68 0x392 0x144004>; + assigned-address = <0xa>; + }; + + /* + * I3C device without a static I2C address but requiring + * resources described in the DT. + */ + sensor@0,39200154004 { + reg = <0x0 0x392 0x154004>; + clocks = <&clock_provider 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt new file mode 100644 index 000000000000..5020eb71eb8d --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt @@ -0,0 +1,41 @@ +Bindings for Synopsys DesignWare I3C master block +================================================= + +Required properties: +-------------------- +- compatible: shall be "snps,dw-i3c-master-1.00a" +- clocks: shall reference the core_clk +- interrupts: the interrupt line connected to this I3C master +- reg: Offset and length of I3C master registers + +Mandatory properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- #address-cells: shall be set to 3 +- #size-cells: shall be set to 0 + +Optional properties defined by the generic binding (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details): + +- i2c-scl-hz +- i3c-scl-hz + +I3C device connected on the bus follow the generic description (see +Documentation/devicetree/bindings/i3c/i3c.txt for more details). + +Example: + + i3c-master@2000 { + compatible = "snps,dw-i3c-master-1.00a"; + #address-cells = <3>; + #size-cells = <0>; + reg = <0x02000 0x1000>; + interrupts = <0>; + clocks = <&i3cclk>; + + eeprom@57{ + compatible = "atmel,24c01"; + reg = <0x57 0x0 0x10>; + pagesize = <0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt index dfdce67826ba..764e28ec1a0a 100644 --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -64,7 +64,7 @@ Optional properties for all bus drivers: Example for a SPI device node: - lis302@0 { + accelerometer@0 { compatible = "st,lis302dl-spi"; reg = <0>; spi-max-frequency = <1000000>; @@ -89,7 +89,7 @@ Example for a SPI device node: Example for a I2C device node: - lis331dlh: lis331dlh@18 { + lis331dlh: accelerometer@18 { compatible = "st,lis331dlh", "st,lis3lv02d"; reg = <0x18>; Vdd-supply = <&lis3_reg>; diff --git a/Documentation/devicetree/bindings/iio/adc/ad7949.txt b/Documentation/devicetree/bindings/iio/adc/ad7949.txt new file mode 100644 index 000000000000..c7f5057356b1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ad7949.txt @@ -0,0 +1,16 @@ +* Analog Devices AD7949/AD7682/AD7689 + +Required properties: + - compatible: Should be one of + * "adi,ad7949" + * "adi,ad7682" + * "adi,ad7689" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Example: +adc@0 { + compatible = "adi,ad7949"; + reg = <0>; + vref-supply = <&vdd_supply>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/adc.txt b/Documentation/devicetree/bindings/iio/adc/adc.txt new file mode 100644 index 000000000000..5bbaa330a250 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adc.txt @@ -0,0 +1,23 @@ +Common ADCs properties + +Optional properties for child nodes: +- bipolar : Boolean, if set the channel is used in bipolar mode. +- diff-channels : Differential channels muxed for this ADC. The first value + specifies the positive input pin, the second value the negative + input pin. + +Example: + adc@0 { + compatible = "some,adc"; + ... + channel@0 { + bipolar; + diff-channels = <0 1>; + ... + }; + + channel@1 { + diff-channels = <2 3>; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt new file mode 100644 index 000000000000..416273dce569 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt @@ -0,0 +1,75 @@ +Analog Devices AD7124 ADC device driver + +Required properties for the AD7124: + - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" + - reg: SPI chip select number for the device + - spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt + - clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt + - clock-names: Must be "mclk". + - interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + + Required properties: + * #address-cells: Must be 1. + * #size-cells: Must be 0. + + Subnode(s) represent the external channels which are connected to the ADC. + Each subnode represents one channel and has the following properties: + Required properties: + * reg: The channel number. It can have up to 4 channels on ad7124-4 + and 8 channels on ad7124-8, numbered from 0 to 15. + * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt + + Optional properties: + * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt + * adi,reference-select: Select the reference source to use when + converting on the the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + +Optional properties: + - refin1-supply: refin1 supply can be used as reference for conversion. + - refin2-supply: refin2 supply can be used as reference for conversion. + - avdd-supply: avdd supply can be used as reference for conversion. + +Example: + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt index 54b823f3a453..325090e43ce6 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -22,6 +22,12 @@ Required properties: - vref-supply: the regulator supply for the ADC reference voltage - #io-channel-cells: must be 1, see ../iio-bindings.txt +Optional properties: +- nvmem-cells: phandle to the temperature_calib eFuse cells +- nvmem-cell-names: if present (to enable the temperature sensor + calibration) this must contain "temperature_calib" + + Example: saradc: adc@8680 { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt index 6c49db7f8ad2..a10c1f89037d 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt @@ -11,7 +11,7 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 and s5pv210 controllers. + for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for @@ -28,6 +28,8 @@ Required properties: the ADC in s3c2443 and compatibles Must be "samsung,s3c6410-adc" for the ADC in s3c6410 and compatibles + Must be "samsung,s5pv210-adc" for + the ADC in s5pv210 and compatibles - reg: List of ADC register address range - The base address and range of ADC register - The base address and range of ADC_PHY register (every diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt index daa2b2c29428..c07ce1a3f5c4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,14 @@ * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" + - compatible: Should be one of: + - "ti,adc128s052" + - "ti,adc122s021" + - "ti,adc122s051" + - "ti,adc122s101" + - "ti,adc124s021" + - "ti,adc124s051" + - "ti,adc124s101" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt new file mode 100644 index 000000000000..e5a507db5e01 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt @@ -0,0 +1,23 @@ +TI DAC7311 device tree bindings + +Required properties: +- compatible: must be set to: + * "ti,dac7311" + * "ti,dac6311" + * "ti,dac5311" +- reg: spi chip select number for the device +- vref-supply: The regulator supply for ADC reference voltage + +Optional properties: +- spi-max-frequency: Max SPI frequency to use + +Example: + + spi_master { + dac@0 { + compatible = "ti,dac7311"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vdd_supply>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 879322ad50fd..69d53d98d0f0 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -13,6 +13,7 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- st,pullups : enable/disable internal i2c controller pullup resistors. - drive-open-drain: the interrupt/data ready line will be configured as open drain, which is useful if several sensors share the same interrupt line. This is a boolean property. diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt new file mode 100644 index 000000000000..c07c7f052556 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt @@ -0,0 +1,18 @@ +VISHAY VCNL4035 - Ambient Light and proximity sensor + +Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf + +Required properties: + + -compatible: should be "vishay,vcnl4035" + -reg: I2C address of the sensor, should be 0x60 + -interrupts: interrupt mapping for GPIO IRQ (level active low) + +Example: + +light-sensor@60 { + compatible = "vishay,vcnl4035"; + reg = <0x60>; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt new file mode 100644 index 000000000000..bdd40bcaaa1f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/mag3110.txt @@ -0,0 +1,27 @@ +* FREESCALE MAG3110 magnetometer sensor + +Required properties: + + - compatible : should be "fsl,mag3110" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the sensor's IO. + +Example: + +magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt new file mode 100644 index 000000000000..497c932e9e39 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt @@ -0,0 +1,20 @@ +* PNI RM3100 3-axis magnetometer sensor + +Required properties: + +- compatible : should be "pni,rm3100" +- reg : the I2C address or SPI chip select number of the sensor. + +Optional properties: + +- interrupts: data ready (DRDY) from the chip. + The interrupts can be triggered on level high. + +Example: + +rm3100: rm3100@20 { + compatible = "pni,rm3100"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt new file mode 100644 index 000000000000..566711b9950c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt @@ -0,0 +1,28 @@ +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer + +Datasheet publicly available at: +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "microchip,mcp41010" + "microchip,mcp41050" + "microchip,mcp41100" + "microchip,mcp42010" + "microchip,mcp42050" + "microchip,mcp42100" + +Example: +potentiometer@0 { + compatible = "microchip,mcp41010"; + reg = <0>; + spi-max-frequency = <500000>; +}; diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt new file mode 100644 index 000000000000..477d41fa6467 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt @@ -0,0 +1,31 @@ +Analog Devices AD2S90 Resolver-to-Digital Converter + +https://www.analog.com/en/products/ad2s90.html + +Required properties: + - compatible: should be "adi,ad2s90" + - reg: SPI chip select number for the device + - spi-max-frequency: set maximum clock frequency, must be 830000 + - spi-cpol and spi-cpha: + Either SPI mode (0,0) or (1,1) must be used, so specify none or both of + spi-cpha, spi-cpol. + +See for more details: + Documentation/devicetree/bindings/spi/spi-bus.txt + +Note about max frequency: + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns + delay is expected between the application of a logic LO to CS and the + application of SCLK, as also specified. And since the delay is not + implemented in the spi code, to satisfy it, SCLK's period should be at most + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives + roughly 830000Hz. + +Example: +resolver@0 { + compatible = "adi,ad2s90"; + reg = <0>; + spi-max-frequency = <830000>; + spi-cpol; + spi-cpha; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 6f626f73417e..ddcb95509599 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -48,6 +48,7 @@ Accelerometers: - st,lis3l02dq - st,lis2dw12 - st,lis3dhh +- st,lis3de Gyroscopes: - st,l3g4200d-gyro @@ -67,6 +68,7 @@ Magnetometers: - st,lsm303dlm-magn - st,lis3mdl-magn - st,lis2mdl +- st,lsm9ds1-magn Pressure sensors: - st,lps001wp-press diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt index 2bb2626fdb78..1ca6cc5ebf8e 100644 --- a/Documentation/devicetree/bindings/input/input-reset.txt +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define a set of keys. Required property: -sysrq-reset-seq: array of Linux keycodes, one keycode per cell. +keyset: array of Linux keycodes, one keycode per cell. Optional property: timeout-ms: duration keys must be pressed together in milliseconds before diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt index b290ca150d30..404352524c3a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt @@ -2,7 +2,9 @@ Allwinner Sunxi Interrupt Controller Required properties: -- compatible : should be "allwinner,sun4i-a10-ic" +- compatible : should be one of the following: + "allwinner,sun4i-a10-ic" + "allwinner,suniv-f1c100s-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 3ea78c4ef887..b83bb8249074 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -7,7 +7,9 @@ Interrupts (LPI). Main node required properties: -- compatible : should at least contain "arm,gic-v3". +- compatible : should at least contain "arm,gic-v3" or either + "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs + to address SoC specific bugs/quirks - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. Must be a single cell with a value of at least 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt new file mode 100644 index 000000000000..45790ce6f5b9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt @@ -0,0 +1,34 @@ +Freescale IRQSTEER Interrupt multiplexer + +Required properties: + +- compatible: should be: + - "fsl,imx8m-irqsteer" + - "fsl,imx-irqsteer" +- reg: Physical base address and size of registers. +- interrupts: Should contain the parent interrupt line used to multiplex the + input interrupts. +- clocks: Should contain one clock for entry in clock-names + see Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: + - "ipg": main logic clock +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value must be 1. +- fsl,channel: The output channel that all input IRQs should be steered into. +- fsl,irq-groups: Number of IRQ groups managed by this controller instance. + Each group manages 64 input interrupts. + +Example: + + interrupt-controller@32e2d000 { + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,irq-groups = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt index 8b53273cb22f..608fee15a4cf 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt @@ -5,7 +5,7 @@ Required properties: "mrvl,mmp2-mux-intc" - reg : Address and length of the register set of the interrupt controller. If the interrupt controller is intc, address and length means the range - of the whold interrupt controller. If the interrupt controller is mux-intc, + of the whole interrupt controller. If the interrupt controller is mux-intc, address and length means one register. Since address of mux-intc is in the range of intc. mux-intc is secondary interrupt controller. - reg-names : Name of the register set of the interrupt controller. It's diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt new file mode 100644 index 000000000000..e0062aebf025 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt @@ -0,0 +1,61 @@ +RDA Micro RDA8810PL Interrupt Controller + +The interrupt controller in RDA8810PL SoC is a custom interrupt controller +which supports up to 32 interrupts. + +Required properties: + +- compatible: Should be "rda,8810pl-intc". +- reg: Specifies base physical address of the registers set. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + +The interrupt sources are as follows: + +ID Name +------------ +0: PULSE_DUMMY +1: I2C +2: NAND_NFSC +3: SDMMC1 +4: SDMMC2 +5: SDMMC3 +6: SPI1 +7: SPI2 +8: SPI3 +9: UART1 +10: UART2 +11: UART3 +12: GPIO1 +13: GPIO2 +14: GPIO3 +15: KEYPAD +16: TIMER +17: TIMEROS +18: COMREG0 +19: COMREG1 +20: USB +21: DMC +22: DMA +23: CAMERA +24: GOUDA +25: GPU +26: VPU_JPG +27: VPU_HOST +28: VOC +29: AUIFC0 +30: AUIFC1 +31: L2CC + +Example: + apb@20800000 { + compatible = "simple-bus"; + ... + intc: interrupt-controller@0 { + compatible = "rda,8810pl-intc"; + reg = <0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 6a36bf66d932..cd01b2292ec6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -14,6 +14,10 @@ Required properties: (only needed for exti controller with multiple exti under same parent interrupt: st,stm32-exti and st,stm32h7-exti) +Optional properties: + +- hwlocks: reference to a phandle of a hardware spinlock provider node. + Example: exti: interrupt-controller@40013c00 { diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt new file mode 100644 index 000000000000..78b464ae2672 --- /dev/null +++ b/Documentation/devicetree/bindings/media/aspeed-video.txt @@ -0,0 +1,26 @@ +* Device tree bindings for Aspeed Video Engine + +The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can +capture and compress video data from digital or analog sources. + +Required properties: + - compatible: "aspeed,ast2400-video-engine" or + "aspeed,ast2500-video-engine" + - reg: contains the offset and length of the VE memory region + - clocks: clock specifiers for the syscon clocks associated with + the VE (ordering must match the clock-names property) + - clock-names: "vclk" and "eclk" + - resets: reset specifier for the syscon reset associated with + the VE + - interrupts: the interrupt associated with the VE on this platform + +Example: + +video-engine@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x20000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + resets = <&syscon ASPEED_RESET_VIDEO>; + interrupts = <7>; +}; diff --git a/Documentation/devicetree/bindings/media/cedrus.txt b/Documentation/devicetree/bindings/media/cedrus.txt index a089a0c1ff05..b3c0635dcd0e 100644 --- a/Documentation/devicetree/bindings/media/cedrus.txt +++ b/Documentation/devicetree/bindings/media/cedrus.txt @@ -11,6 +11,8 @@ Required properties: - "allwinner,sun7i-a20-video-engine" - "allwinner,sun8i-a33-video-engine" - "allwinner,sun8i-h3-video-engine" + - "allwinner,sun50i-a64-video-engine" + - "allwinner,sun50i-h5-video-engine" - reg : register base and length of VE; - clocks : list of clock specifiers, corresponding to entries in the clock-names property; diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt index 6b910036b57e..d0bed6fa901a 100644 --- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt +++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt @@ -9,8 +9,14 @@ Required Properties: - clocks: reference to the master clock. - clock-names: shall be "mclk". -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Optional endpoint properties: +- pclk-sample: For information see ../video-interfaces.txt. The value is set to + 0 if it isn't specified. Example: @@ -21,11 +27,10 @@ Example: clocks = <&mclk>; clock-names = "mclk"; - remote = <&pxa_camera>; port { mt9m111_1: endpoint { - bus-width = <8>; remote-endpoint = <&pxa_camera>; + pclk-sample = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt new file mode 100644 index 000000000000..f11f28a5fda4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt @@ -0,0 +1,53 @@ +* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor + +The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with +an active array size of 4224H x 3200V. It is programmable through an I2C +interface. +Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum +throughput of 1.2Gbps/lane. + + +Required Properties: +- compatible: Shall be "sony,imx214". +- reg: I2C bus address of the device. Depending on how the sensor is wired, + it shall be <0x10> or <0x1a>; +- enable-gpios: GPIO descriptor for the enable pin. +- vdddo-supply: Chip digital IO regulator (1.8V). +- vdda-supply: Chip analog regulator (2.7V). +- vddd-supply: Chip digital core regulator (1.12V). +- clocks: Reference to the xclk clock. +- clock-frequency: Frequency of the xclk clock. + +Optional Properties: +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt + +The imx214 device node shall contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Required Properties on endpoint: +- data-lanes: check ../video-interfaces.txt +- link-frequencies: check ../video-interfaces.txt +- remote-endpoint: check ../video-interfaces.txt + +Example: + + camera-sensor@1a { + compatible = "sony,imx214"; + reg = <0x1a>; + vdddo-supply = <&pm8994_lvs1>; + vddd-supply = <&camera_vddd_1v12>; + vdda-supply = <&pm8994_l17>; + lens-focus = <&ad5820>; + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + clocks = <&mmcc CAMSS_MCLK0_CLK>; + clock-frequency = <24000000>; + port { + imx214_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <480000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt index 00d0d1bf7647..b602c4c025e7 100644 --- a/Documentation/devicetree/bindings/media/qcom,venus.txt +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt @@ -53,7 +53,8 @@ * Subnodes The Venus video-codec node must contain two subnodes representing -video-decoder and video-encoder. +video-decoder and video-encoder, and one optional firmware subnode. +Firmware subnode is needed when the platform does not have TrustZone. Every of video-encoder or video-decoder subnode should have: @@ -79,6 +80,13 @@ Every of video-encoder or video-decoder subnode should have: power domain which is responsible for collapsing and restoring power to the subcore. +The firmware subnode must have: + +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + * An Example video-codec@1d00000 { compatible = "qcom,msm8916-venus"; @@ -105,4 +113,8 @@ Every of video-encoder or video-decoder subnode should have: clock-names = "core"; power-domains = <&mmcc VENUS_CORE1_GDSC>; }; + + video-firmware { + iommus = <&apps_iommu 0x10b2 0x0>; + }; }; diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index d329a4e8ac58..0dd84a183ca7 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -24,6 +24,8 @@ on Gen3 platforms to a CSI-2 receiver. - "renesas,vin-r8a7796" for the R8A7796 device - "renesas,vin-r8a77965" for the R8A77965 device - "renesas,vin-r8a77970" for the R8A77970 device + - "renesas,vin-r8a77980" for the R8A77980 device + - "renesas,vin-r8a77990" for the R8A77990 device - "renesas,vin-r8a77995" for the R8A77995 device - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt index 2d385b65b275..541d936b62e8 100644 --- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt +++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt @@ -12,6 +12,8 @@ Mandatory properties - "renesas,r8a7796-csi2" for the R8A7796 device. - "renesas,r8a77965-csi2" for the R8A77965 device. - "renesas,r8a77970-csi2" for the R8A77970 device. + - "renesas,r8a77980-csi2" for the R8A77980 device. + - "renesas,r8a77990-csi2" for the R8A77990 device. - reg: the register base and size for the device registers - interrupts: the interrupt for the device diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt index fc5aa263abe5..98a72c0b3c64 100644 --- a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt +++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt @@ -5,6 +5,10 @@ Required properties: - reg: SPI chip select number for the device. - spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz). +Optional properties: +- vcc-supply: Optional phandle to the vcc regulator to power the adapter, + as described in the file ../regulator/regulator.txt + Example: cxd2880@0 { diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt new file mode 100644 index 000000000000..d4ab34f2240c --- /dev/null +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -0,0 +1,59 @@ +Allwinner V3s Camera Sensor Interface +------------------------------------- + +Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. + +Required properties: + - compatible: value must be one of: + * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-v3s-csi" + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the CSI + * bus: the CSI interface clock + * mod: the CSI module clock + * ram: the CSI DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the CSI + +The CSI node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Endpoint node properties for CSI +--------------------------------- +See the video-interfaces.txt for a detailed description of these properties. +- remote-endpoint : (required) a phandle to the bus receiver's endpoint + node +- bus-width: : (required) must be 8, 10, 12 or 16 +- pclk-sample : (optional) (default: sample on falling edge) +- hsync-active : (required; parallel-only) +- vsync-active : (required; parallel-only) + +Example: + +csi1: csi@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index a43d26d41e04..9d32762c47e1 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,15 +1,32 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller -This controller has an optional ECC support in half-bus width (16-bit) -configuration. The ECC controller corrects one bit error and detects -two bit errors. +The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit +bus width configurations. + +The Zynq DDR ECC controller has an optional ECC support in half-bus width +(16-bit) configuration. + +These both ECC controllers correct single bit ECC errors and detect double bit +ECC errors. Required properties: - - compatible: Should be 'xlnx,zynq-ddrc-a05' - - reg: Base address and size of the controllers memory area + - compatible: One of: + - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller + - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller + - reg: Should contain DDR controller registers location and length. + +Required properties for "xlnx,zynqmp-ddrc-2.40a": + - interrupts: Property with a value describing the interrupt number. Example: memory-controller@f8006000 { compatible = "xlnx,zynq-ddrc-a05"; reg = <0xf8006000 0x1000>; }; + + mc: memory-controller@fd070000 { + compatible = "xlnx,zynqmp-ddrc-2.40a"; + reg = <0x0 0xfd070000 0x0 0x30000>; + interrupt-parent = <&gic>; + interrupts = <0 112 4>; + }; diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 188f0373d441..2af4ff95d6bc 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -32,6 +32,15 @@ Required properties: - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 +Supported common regulator properties, see ../regulator/regulator.txt for +more information: +- regulator-ramp-delay: sets the ramp up delay in uV/us + AXP20x/DCDC2: 1600, 800 + AXP20x/LDO3: 1600, 800 +- regulator-soft-start: enable the output at the lowest possible voltage and + only then set the desired voltage + AXP20x/LDO3: software-based implementation + Optional properties: - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt index 01fdc33a41d0..bb7e896cb644 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt @@ -10,7 +10,7 @@ such as network interfaces, crypto accelerator instances, L2 switches, etc. For an overview of the DPAA2 architecture and fsl-mc bus see: -Documentation/networking/dpaa2/overview.rst +Documentation/networking/device_drivers/freescale/dpaa2/overview.rst As described in the above overview, all DPAA2 objects in a DPRC share the same hardware "isolation context" and a 10-bit value called an ICID diff --git a/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt new file mode 100644 index 000000000000..985e90736780 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt @@ -0,0 +1,29 @@ +* QEMU PVPANIC MMIO Configuration bindings + +QEMU's emulation / virtualization targets provide the following PVPANIC +MMIO Configuration interface on the "virt" machine. +type: + +- a read-write, 16-bit wide data register. + +QEMU exposes the data register to guests as memory mapped registers. + +Required properties: + +- compatible: "qemu,pvpanic-mmio". +- reg: the MMIO region used by the device. + * Bytes 0x0 Write panic event to the reg when guest OS panics. + * Bytes 0x1 Reserved. + +Example: + +/ { + #size-cells = <0x2>; + #address-cells = <0x2>; + + pvpanic-mmio@9060000 { + compatible = "qemu,pvpanic-mmio"; + reg = <0x0 0x9060000 0x0 0x2>; + }; +}; + diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index e2effe17f05e..1edbb049cccb 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -16,6 +16,10 @@ Required Properties: - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY + Note: This binding has been deprecated and moved to [5]. + + [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt + - reg: From mmc bindings: Register location and length. - clocks: From clock bindings: Handles to clock inputs. - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 3e29050ec769..9201a7d8d7b0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -16,6 +16,7 @@ Required properties: "fsl,imx6sl-usdhc" "fsl,imx6sx-usdhc" "fsl,imx7d-usdhc" + "fsl,imx8qxp-usdhc" Optional properties: - fsl,wp-controller : Indicate to use controller internal write protection diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt new file mode 100644 index 000000000000..15dbbbace27e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -0,0 +1,36 @@ +Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs + +The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. +Only deviations are documented here. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + [2] Documentation/devicetree/bindings/clock/clock-bindings.txt + [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Required Properties: + - compatible: should be "ti,am654-sdhci-5.1" + - reg: Must be two entries. + - The first should be the sdhci register space + - The second should the subsystem/phy register space + - clocks: Handles to the clock inputs. + - clock-names: Tuple including "clk_xin" and "clk_ahb" + - interrupts: Interrupt specifiers + - ti,otap-del-sel: Output Tap Delay select + - ti,trm-icp: DLL trim select + - ti,driver-strength-ohm: driver strength in ohms. + Valid values are 33, 40, 50, 66 and 100 ohms. + +Example: + + sdhci0: sdhci@4f80000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; + power-domains = <&k3_pds 47>; + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + sdhci-caps-mask = <0x80000007 0x0>; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 502b3b851ebb..da4edb146a98 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -4,15 +4,28 @@ This file documents differences between the core properties in mmc.txt and the properties used by the sdhci-msm driver. Required properties: -- compatible: Should contain: +- compatible: Should contain a SoC-specific string and a IP version string: + version strings: "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 - "qcom,sdhci-msm-v5" for sdcc versions >= 5.0 + "qcom,sdhci-msm-v5" for sdcc version 5.0 For SDCC version 5.0.0, MCI registers are removed from SDCC interface and some registers are moved to HC. New compatible string is added to support this change - "qcom,sdhci-msm-v5". + full compatible strings with SoC and version: + "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" + "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" + "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" + NOTE that some old device tree files may be floating around that only + have the string "qcom,sdhci-msm-v4" without the SoC compatible string + but doing that should be considered a deprecated practice. + - reg: Base address and length of the register in the following order: - Host controller register map (required) - - SD Core register map (required) + - SD Core register map (required for msm-v4 and below) - interrupts: Should contain an interrupt-specifiers for the interrupts: - Host controller interrupt (required) - pinctrl-names: Should contain only one value - "default". @@ -29,7 +42,7 @@ Required properties: Example: sdhc_1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; interrupts = <0 123 0>; bus-width = <8>; @@ -46,7 +59,7 @@ Example: }; sdhc_2: sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; interrupts = <0 125 0>; bus-width = <4>; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt index 393848c2138e..72c4dec7e1db 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -2,6 +2,8 @@ Refer to mmc.txt for standard MMC bindings. +For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning. + Required properties: - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers Should be "ti,k2g-sdhci" for K2G diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 27f2eab2981d..2b4f17ca9087 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -13,12 +13,14 @@ Required properties: - compatible: should contain one or more of the following: "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC + "renesas,sdhi-r7s9210" - SDHI IP on R7S9210 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC "renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC "renesas,sdhi-r8a774a1" - SDHI IP on R8A774A1 SoC + "renesas,sdhi-r8a774c0" - SDHI IP on R8A774C0 SoC "renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC "renesas,sdhi-mmc-r8a77470" - SDHI/MMC IP on R8A77470 SoC "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC @@ -56,7 +58,7 @@ Required properties: "core" and "cd". If the controller only has 1 clock, naming is not required. Devices which have more than 1 clock are listed below: - 2: R7S72100 + 2: R7S72100, R7S9210 Optional properties: - pinctrl-names: should be "default", "state_uhs" diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index 232fa12e90ef..7df0dcaccb7d 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -29,6 +29,8 @@ file systems on embedded devices. - use-advanced-sector-protection: boolean to enable support for the advanced sector protection (Spansion: PPB - Persistent Protection Bits) locking. + - addr-gpios : (optional) List of GPIO descriptors that will be used to + address the MSBs address lines. The order goes from LSB to MSB. For JEDEC compatible devices, the following additional properties are defined: diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt new file mode 100644 index 000000000000..fd0ebe4e3415 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt @@ -0,0 +1,27 @@ +RedBoot FLASH Image System (FIS) Partitions +=========================================== + +The FLASH Image System (FIS) directory is a flash description +format closely associated with the RedBoot boot loader. + +It uses one single flash eraseblock in the flash to store an index of +all images in the flash. + +This block size will vary depending on flash but is typically +32 KB in size. + +Required properties: +- compatible : (required) must be "redboot-fis" +- fis-index-block : (required) a index to the eraseblock containing + the FIS directory on this device. On a flash memory with 32KB + eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the + second eraseblock at 0x00008000 and so on. + +Example: + +flash@0 { + partitions { + compatible = "redboot-fis"; + fis-index-block = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index 4194ff7e6ee6..c26f4e11037c 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -10,6 +10,8 @@ device the slave device is attached to. Required properties: - compatible: should contain one of the following: + * "brcm,bcm20702a1" + * "brcm,bcm4330-bt" * "brcm,bcm43438-bt" Optional properties: @@ -18,8 +20,13 @@ Optional properties: - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor - - clocks: clock specifier if external clock provided to the controller - - clock-names: should be "extclk" + - clocks: 1 or 2 clocks as defined in clock-names below, in that order + - clock-names: names for clock inputs, matching the clocks given + - "extclk": deprecated, replaced by "txco" + - "txco": external reference clock (not a standalone crystal) + - "lpo": external low power 32.768 kHz clock + - vbat-supply: phandle to regulator supply for VBAT + - vddio-supply: phandle to regulator supply for VDDIO Example: diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index bfc0c433654f..bc77477c6878 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -24,6 +24,14 @@ Optional properties: if this property is present then controller is assumed to be big endian. +- fsl,stop-mode: register bits of stop mode control, the format is + <&gpr req_gpr req_bit ack_gpr ack_bit>. + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of CAN stop request. + req_bit is the bit offset of CAN stop request. + ack_gpr is the gpr register offset of CAN stop acknowledge. + ack_bit is the bit offset of CAN stop acknowledge. + Example: can@1c000 { diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt index 060e2d46bad9..100cc40b8510 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt @@ -6,6 +6,7 @@ Required properties: - "xlnx,zynq-can-1.0" for Zynq CAN controllers - "xlnx,axi-can-1.00.a" for Axi CAN controllers - "xlnx,canfd-1.0" for CAN FD controllers + - "xlnx,canfd-2.0" for CAN FD 2.0 controllers - reg : Physical base address and size of the controller registers map. - interrupts : Property with a value describing the interrupt diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index b3acebe08eb0..3264e1978d25 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -22,7 +22,8 @@ Required properties: - cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection device. See also cpsw-phy-sel.txt for it's binding. Note that in legacy cases cpsw-phy-sel may be - a child device instead of a phandle. + a child device instead of a phandle + (DEPRECATED, use phys property instead). Optional properties: - ti,hwmods : Must be "cpgmac0" @@ -44,6 +45,7 @@ Optional properties: Slave Properties: Required properties: - phy-mode : See ethernet.txt file in the same directory +- phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt) Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports @@ -85,12 +87,14 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; @@ -114,11 +118,13 @@ Examples: phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@1 { phy_id = <&davinci_mdio>, <1>; phy-mode = "rgmii-txid"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 3ceeb8de1196..35694c0c376b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -7,7 +7,7 @@ limitations. Current Binding --------------- -Switches are true Linux devices and can be probes by any means. Once +Switches are true Linux devices and can be probed by any means. Once probed, they register to the DSA framework, passing a node pointer. This node is expected to fulfil the following binding, and may contain additional properties as required by the device it is diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index ac145b885e95..0f407fb371ce 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -8,6 +8,10 @@ Required properties: - "microchip,ksz9477" - "microchip,ksz9897" +Optional properties: + +- reset-gpios : Should be a gpio specifier for a reset line + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/Documentation/devicetree/bindings/net/icplus-ip101ag.txt b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt new file mode 100644 index 000000000000..a784592bbb15 --- /dev/null +++ b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt @@ -0,0 +1,19 @@ +IC Plus Corp. IP101A / IP101G Ethernet PHYs + +There are different models of the IP101G Ethernet PHY: +- IP101GR (32-pin QFN package) +- IP101G (die only, no package) +- IP101GA (48-pin LQFP package) + +There are different models of the IP101A Ethernet PHY (which is the +predecessor of the IP101G): +- IP101A (48-pin LQFP package) +- IP101AH (48-pin LQFP package) + +Optional properties for the IP101GR (32-pin QFN package): + +- icplus,select-rx-error: + pin 21 ("RXER/INTR_32") will output the receive error status. + interrupts are not routed outside the PHY in this mode. +- icplus,select-interrupt: + pin 21 ("RXER/INTR_32") will output the interrupt signal. diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt new file mode 100644 index 000000000000..8a08621a5b54 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt @@ -0,0 +1,78 @@ +MediaTek DWMAC glue layer controller + +This file documents platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +The device node has following properties. + +Required properties: +- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC +- reg: Address and length of the register set for the device +- interrupts: Should contain the MAC interrupts +- interrupt-names: Should contain a list of interrupt names corresponding to + the interrupts in the interrupts property, if available. + Should be "macirq" for the main MAC IRQ +- clocks: Must contain a phandle for each entry in clock-names. +- clock-names: The name of the clock listed in the clocks property. These are + "axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC +- mac-address: See ethernet.txt in the same directory +- phy-mode: See ethernet.txt in the same directory +- mediatek,pericfg: A phandle to the syscon node that control ethernet + interface and timing delay. + +Optional properties: +- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0. + It should be defined for RGMII/MII interface. +- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0. + It should be defined for RGMII/MII/RMII interface. +Both delay properties need to be a multiple of 170 for RGMII interface, +or will round down. Range 0~31*170. +Both delay properties need to be a multiple of 550 for MII/RMII interface, +or will round down. Range 0~31*550. + +- mediatek,rmii-rxc: boolean property, if present indicates that the RMII + reference clock, which is from external PHYs, is connected to RXC pin + on MT2712 SoC. + Otherwise, is connected to TXC pin. +- mediatek,txc-inverse: boolean property, if present indicates that + 1. tx clock will be inversed in MII/RGMII case, + 2. tx clock inside MAC will be inversed relative to reference clock + which is from external PHYs in RMII case, and it rarely happen. +- mediatek,rxc-inverse: boolean property, if present indicates that + 1. rx clock will be inversed in MII/RGMII case. + 2. reference clock will be inversed when arrived at MAC in RMII case. +- assigned-clocks: mac_main and ptp_ref clocks +- assigned-clock-parents: parent clocks of the assigned clocks + +Example: + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac"; + reg = <0 0x1101c000 0 0x1300>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq"; + phy-mode ="rgmii"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "ptp_top"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>; + mediatek,pericfg = <&pericfg>; + mediatek,tx-delay-ps = <1530>; + mediatek,rx-delay-ps = <1530>; + mediatek,rmii-rxc; + mediatek,txc-inverse; + mediatek,rxc-inverse; + snps,txpbl = <32>; + snps,rxpbl = <32>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 3530256a879c..7ad36213093e 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -18,6 +18,7 @@ Required properties: R-Car Gen2 and RZ/G1 devices. - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. + - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC. - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - "renesas,etheravb-r8a77965" for the R8A77965 SoC. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 2196d1ab3c8c..ae661e65354e 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -21,10 +21,22 @@ can be provided per device. SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". -Optional properties: - reg: Address and length of the register set for the device. - reg-names: Must include the list of following reg names, "membase" +- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" + compatible target. + reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" + compatible target. + Must contain interrupt-names property per entry for + "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. + +- interrupt-names: Must include the entries for MSI interrupt + names ("msi0" to "msi15") and legacy interrupt + name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" + compatible targets. + +Optional properties: - resets: Must contain an entry for each entry in reset-names. See ../reset/reseti.txt for details. - reset-names: Must include the list of following reset names, @@ -37,12 +49,9 @@ Optional properties: - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc". -- interrupts: List of interrupt lines. Must contain an entry - for each entry in the interrupt-names property. -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy"), + "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and + "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" + compatible target. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. @@ -55,14 +64,25 @@ Optional properties: - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. - <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" is "vdd-0.8-cx-mx". + optional "supply-name" are "vdd-0.8-cx-mx", + "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". - memory-region: Usage: optional Value type: <phandle> Definition: reference to the reserved-memory for the msa region used by the wifi firmware running in Q6. +- iommus: + Usage: optional + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. +- ext-fem-name: + Usage: Optional + Value type: string + Definition: Name of external front end module used. Some valid FEM names + for example: "microsemi-lx5586", "sky85703-11" + and "sky85803" etc. -Example (to supply the calibration data alone): +Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -74,10 +94,10 @@ pci { #address-cells = <3>; device_type = "pci"; - ath10k@0,0 { + wifi@0,0 { reg = <0 0 0 0 0>; - device_type = "pci"; qcom,ath10k-calibration-data = [ 01 02 03 ... ]; + ext-fem-name = "microsemi-lx5586"; }; }; }; @@ -138,21 +158,25 @@ wifi@18000000 { compatible = "qcom,wcn3990-wifi"; reg = <0x18800000 0x800000>; reg-names = "membase"; - clocks = <&clock_gcc clk_aggre2_noc_clk>; - clock-names = "smmu_aggre2_noc_clk" + clocks = <&clock_gcc clk_rf_clk2_pin>; + clock-names = "cxo_ref_clk_pin"; interrupts = - <0 130 0 /* CE0 */ >, - <0 131 0 /* CE1 */ >, - <0 132 0 /* CE2 */ >, - <0 133 0 /* CE3 */ >, - <0 134 0 /* CE4 */ >, - <0 135 0 /* CE5 */ >, - <0 136 0 /* CE6 */ >, - <0 137 0 /* CE7 */ >, - <0 138 0 /* CE8 */ >, - <0 139 0 /* CE9 */ >, - <0 140 0 /* CE10 */ >, - <0 141 0 /* CE11 */ >; + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; vdd-0.8-cx-mx-supply = <&pm8998_l5>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; memory-region = <&wifi_msa_mem>; + iommus = <&apps_smmu 0x0040 0x1>; }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index e3298e18de26..2e0723ab3384 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -2,6 +2,8 @@ Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" +- clocks: phandle to the efuse peripheral clock provided by the + clock controller. = Data cells = Are child nodes of eFuse, bindings of which as described in @@ -11,6 +13,7 @@ Example: efuse: efuse { compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt new file mode 100644 index 000000000000..1bd15785b4ae --- /dev/null +++ b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt @@ -0,0 +1,17 @@ +* NDS32 Performance Monitor Units + +NDS32 core have a PMU for counting cpu and cache events like cache misses. +The NDS32 PMU representation in the device tree should be done as under: + +Required properties: + +- compatible : + "andestech,nds32v3-pmu" + +- interrupts : The interrupt number for NDS32 PMU is 13. + +Example: +pmu{ + compatible = "andestech,nds32v3-pmu"; + interrupts = <13>; +} diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt new file mode 100644 index 000000000000..a22e853d710c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -0,0 +1,17 @@ +* Freescale i.MX8MQ USB3 PHY binding + +Required properties: +- compatible: Should be "fsl,imx8mq-usb-phy" +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- reg: The base address and length of the registers +- clocks: phandles to the clocks for each clock listed in clock-names +- clock-names: must contain "phy" + +Example: + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt new file mode 100644 index 000000000000..6e1b47bfce43 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt @@ -0,0 +1,67 @@ +Cadence Sierra PHY +----------------------- + +Required properties: +- compatible: cdns,sierra-phy-t0 +- clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must be "phy_clk" +- resets: Must contain an entry for each in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include "sierra_reset" and "sierra_apb". + "sierra_reset" must control the reset line to the PHY. + "sierra_apb" must control the reset line to the APB PHY + interface. +- reg: register range for the PHY. +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Optional properties: +- cdns,autoconf: A boolean property whose presence indicates that the + PHY registers will be configured by hardware. If not + present, all sub-node optional properties must be + provided. + +Sub-nodes: + Each group of PHY lanes with a single master lane should be represented as + a sub-node. Note that the actual configuration of each lane is determined by + hardware strapping, and must match the configuration specified here. + +Sub-node required properties: +- #phy-cells: Generic PHY binding; must be 0. +- reg: The master lane number. This is the lowest numbered lane + in the lane group. +- resets: Must contain one entry which controls the reset line for the + master lane of the sub-node. + See ../reset/reset.txt for details. + +Sub-node optional properties: +- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The + group is made up of consecutive lanes. +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on + configuration of lanes. + +Example: + pcie_phy4: pcie-phy@fd240000 { + compatible = "cdns,sierra-phy-t0"; + reg = <0x0 0xfd240000 0x0 0x40000>; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "sierra_reset", "sierra_apb"; + clocks = <&phyclock>; + clock-names = "phy_clk"; + #address-cells = <1>; + #size-cells = <0>; + pcie0_phy0: pcie-phy@0 { + reg = <0>; + resets = <&phyrst 2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + pcie0_phy1: pcie-phy@2 { + reg = <2>; + resets = <&phyrst 4>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index adf20b2bdf71..41a1074228ba 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -25,10 +25,6 @@ Required properties: - For all others: - The reg-names property shouldn't be defined. - - #clock-cells: must be 1 - - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe - interface (for pipe based PHYs). These clock are then gate-controlled - by gcc. - #address-cells: must be 1 - #size-cells: must be 1 - ranges: must be present @@ -40,24 +36,36 @@ Required properties: "ref" for 19.2 MHz ref clk, "com_aux" for phy common block aux clock, "ref_aux" for phy reference aux clock, + + For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". - For "qcom,qmp-v3-usb3-phy" must contain: + For "qcom,sdm845-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-ufs-phy" must contain: + "ref", "ref_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - reset-names: "phy" for reset of phy block, "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset (Optional). + "cfg" for phy's ahb cfg block reset. + + For "qcom,ipq8074-qmp-pcie-phy" must contain: + "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". + "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". + "phy", "common". + For "qcom,sdm845-qmp-usb3-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-ufs-phy": no resets are listed. - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -70,37 +78,45 @@ Required nodes: - Each device node of QMP phy is required to have as many child nodes as the number of lanes the PHY has. -Required properties for child node: +Required properties for child nodes of PCIe PHYs (one child per lane): - reg: list of offset and length pairs of register sets for PHY blocks - - - index 0: tx - - index 1: rx - - index 2: pcs - - index 3: pcs_misc (optional) + tx, rx, pcs, and pcs_misc (optional). + - #phy-cells: must be 0 +Required properties for a single "lanes" child node of non-PCIe PHYs: + - reg: list of offset and length pairs of register sets for PHY blocks + For 1-lane devices: + tx, rx, pcs, and (optionally) pcs_misc + For 2-lane devices: + tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc - #phy-cells: must be 0 +Required properties for child node of PCIe and USB3 qmp phys: - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - - clock-names: Must contain following for pcie and usb qmp phys: + - clock-names: Must contain following: "pipe<lane-number>" for pipe clock specific to each lane. - clock-output-names: Name of the PHY clock that will be the parent for the above pipe clock. - For "qcom,ipq8074-qmp-pcie-phy": - "pcie20_phy0_pipe_clk" Pipe Clock parent (or) "pcie20_phy1_pipe_clk" + - #clock-cells: must be 0 + - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then + gate-controlled by the gcc. +Required properties for child node of PHYs with lane reset, AKA: + "qcom,msm8996-qmp-pcie-phy" - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - - reset-names: Must contain following for pcie qmp phys: + - reset-names: Must contain following: "lane<lane-number>" for reset specific to each lane. Example: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x34000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -122,6 +138,7 @@ Example: reg = <0x35000 0x130>, <0x35200 0x200>, <0x35400 0x1dc>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; @@ -135,3 +152,54 @@ Example: ... ... }; + + phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88eb600 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1d87000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + lanes@1d87400 { + reg = <0x1d87400 0x108>, + <0x1d87600 0x1e0>, + <0x1d87c00 0x1dc>, + <0x1d87800 0x108>, + <0x1d87a00 0x1e0>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 07ca4ec4a745..f2e120af17f0 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -14,13 +14,14 @@ Required properties: * allwinner,sun8i-r40-usb-phy * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy + * allwinner,sun50i-h6-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" - * "pmu0" for H3, V3s and A64 + * "pmu0" for H3, V3s, A64 or H6 * "pmu1" * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "pmu3" for sun8i-h3 + * "pmu3" for sun8i-h3 or sun50i-h6 - #phy-cells : from the generic phy bindings, must be 1 - clocks : phandle + clock specifier for the phy clocks - clock-names : @@ -29,12 +30,13 @@ Required properties: * "usb0_phy", "usb1_phy" for sun8i * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3 + * "usb0_phy" and "usb3_phy" for sun50i-h6 - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3 - * "usb3_reset" for sun8i-h3 + * "usb3_reset" for sun8i-h3 and sun50i-h6 Optional properties: - usb0_id_det-gpios : gpio phandle for reading the otg id pin value diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt new file mode 100644 index 000000000000..50ce9ae0f7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt @@ -0,0 +1,68 @@ +CPSW Port's Interface Mode Selection PHY Tree Bindings +----------------------------------------------- + +TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports +two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. +The interface mode is selected by configuring the MII mode selection register(s) +(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and +bit fields placement in SCM are different between SoCs while fields meaning +is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + +CPSW Port's Interface Mode Selection PHY describes MII interface mode between +CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + +CPSW Port's Interface Mode Selection PHY device should defined as child device +of SCM node (scm_conf) and can be attached to each CPSW port node using standard +PHY bindings (See phy/phy-bindings.txt). + +Required properties: +- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform + "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform + "ti,am43xx-phy-gmii-sel" for am43xx platform + "ti,dm814-phy-gmii-sel" for dm814x platform +- reg : Address and length of the register set for the device +- #phy-cells : must be 2. + cell 1 - CPSW port number (starting from 1) + cell 2 - RMII refclk mode + +Examples: + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + + mac: ethernet@4a100000 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + ... + + cpsw_emac0: slave@4a100200 { + ... + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_emac1: slave@4a100300 { + ... + phys = <&phy_gmii_sel 2 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt index 6d8980c18c34..3e56c1b34a4c 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt @@ -27,6 +27,8 @@ Optional properties: it to an output when the power-off handler is called. If this optional property is not specified, the GPIO is initialized as an output in its inactive state. +- active-delay-ms: Delay (default 100) to wait after driving gpio active +- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is specified, 3000 ms is used. diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt index 826e8a879121..7a1fb532abe5 100644 --- a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt +++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt @@ -4,6 +4,7 @@ Required Properties: - compatible: One of: "x-powers,axp202-ac-power-supply" "x-powers,axp221-ac-power-supply" + "x-powers,axp813-ac-power-supply" This node is a subnode of the axp20x PMIC. @@ -13,6 +14,8 @@ reading ADC channels from the AXP20X ADC. The AXP22X is only able to tell if an AC power supply is present and usable. +AXP813/AXP803 are able to limit current and supply voltage + Example: &axp209 { diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index f4d3b4a10b43..89871ab8c704 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -22,6 +22,18 @@ Optional Properties: - charge-term-current-microamp: current for charge termination phase - constant-charge-current-max-microamp: maximum constant input current - constant-charge-voltage-max-microvolt: maximum constant input voltage + - factory-internal-resistance-micro-ohms: battery factory internal resistance + - ocv-capacity-table-0: An array providing the open circuit voltage (OCV) + of the battery and corresponding battery capacity percent, which is used + to look up battery capacity according to current OCV value. And the open + circuit voltage unit is microvolt. + - ocv-capacity-table-1: Same as ocv-capacity-table-0 + ...... + - ocv-capacity-table-n: Same as ocv-capacity-table-0 + - ocv-capacity-celsius: An array containing the temperature in degree Celsius, + for each of the battery capacity lookup table. The first temperature value + specifies the OCV table 0, and the second temperature value specifies the + OCV table 1, and so on. Battery properties are named, where possible, for the corresponding elements in enum power_supply_property, defined in @@ -42,6 +54,11 @@ Example: charge-term-current-microamp = <128000>; constant-charge-current-max-microamp = <900000>; constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <(-10) 0 10>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...; + ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...; }; charger: charger@11 { diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt index 9e517d307070..ffe2be408bb6 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt @@ -3,7 +3,9 @@ TI BQ24190 Li-Ion Battery Charger Required properties: - compatible: contains one of the following: * "ti,bq24190" + * "ti,bq24192" * "ti,bq24192i" + * "ti,bq24196" - reg: integer, I2C address of the charger. - interrupts[-extended]: configuration for charger INT pin. @@ -19,6 +21,12 @@ Optional properties: - ti,system-minimum-microvolt: when power is connected and the battery is below minimum system voltage, the system will be regulated above this setting. +child nodes: +- usb-otg-vbus: + Usage: optional + Description: Regulator that is used to control the VBUS voltage direction for + either USB host mode or for charging on the OTG port. + Notes: - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default charge current on USB SDP ports, among other features). To simulate this on @@ -39,6 +47,8 @@ Example: interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>; monitored-battery = <&bat>; ti,system-minimum-microvolt = <3200000>; + + usb_otg_vbus: usb-otg-vbus { }; }; &twl_gpio { diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt new file mode 100644 index 000000000000..fc35ac577401 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt @@ -0,0 +1,56 @@ +Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720-fgu", + "sprd,sc2721-fgu", + "sprd,sc2723-fgu", + "sprd,sc2730-fgu", + "sprd,sc2731-fgu". +- reg: The address offset of fuel gauge unit. +- battery-detect-gpios: GPIO for battery detection. +- io-channels: Specify the IIO ADC channel to get temperature. +- io-channel-names: Should be "bat-temp". +- nvmem-cells: A phandle to the calibration cells provided by eFuse device. +- nvmem-cell-names: Should be "fgu_calib". +- monitored-battery: Phandle of battery characteristics devicetree node. + See Documentation/devicetree/bindings/power/supply/battery.txt + +Example: + + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + constant-charge-voltage-max-microvolt = <4350000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + ...... + }; + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fgu@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 5>; + io-channel-names = "bat-temp"; + nvmem-cells = <&fgu_calib>; + nvmem-cell-names = "fgu_calib"; + monitored-battery = <&bat>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 7f31fe7e2093..fbd6a4f943ce 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -6,6 +6,7 @@ Required Properties: - "renesas,pwm-r8a7744": for RZ/G1N - "renesas,pwm-r8a7745": for RZ/G1E - "renesas,pwm-r8a774a1": for RZ/G2M + - "renesas,pwm-r8a774c0": for RZ/G2E - "renesas,pwm-r8a7778": for R-Car M1A - "renesas,pwm-r8a7779": for R-Car H1 - "renesas,pwm-r8a7790": for R-Car H2 diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index ac955dea00d1..4017527619ab 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -15,11 +15,17 @@ Optional input supply properties: - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h +file. The valid names for regulators are: REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. Example: + +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> + pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; @@ -32,6 +38,18 @@ Example: regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; }; vdd_1v2_reg: REG_DCDC2 { @@ -39,6 +57,14 @@ Example: regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { @@ -53,6 +79,14 @@ Example: regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { diff --git a/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt new file mode 100644 index 000000000000..91974e6ee251 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt @@ -0,0 +1,82 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the regulator portion +of the driver. + +Also see these documents for generic binding information: + [1] Regulator: ../regulator/regulator.txt + +This binding must be part of the Lochnagar MFD binding: + [2] ../mfd/cirrus,lochnagar.txt + +Optional sub-nodes: + + - VDDCORE : Initialisation data for the VDDCORE regulator, which + supplies the CODECs digital core if it has no build regulator for that + purpose. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-vddcore" + - SYSVDD-supply: Primary power supply for the Lochnagar. + + - MICVDD : Initialisation data for the MICVDD regulator, which + supplies the CODECs MICVDD. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-micvdd" + - SYSVDD-supply: Primary power supply for the Lochnagar. + + - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies. + Required Properties: + - compatible : One of the following strings: + "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd" + Optional Properties: + - cirrus,micbias-input : A property selecting which of the CODEC + minicard micbias outputs should be used, valid values are 1 - 4. + - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the + MICxVDD outputs, supplying the digital microphones, normally + supplied from the attached CODEC. + + - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the + CODECs analog and 1.8V digital supplies. + Required Properties: + - compatible : Should be set to "regulator-fixed" + - regulator-min-microvolt : Should be set to 1.8V + - regulator-max-microvolt : Should be set to 1.8V + - regulator-boot-on + - regulator-always-on + - vin-supply : Should be set to same supply as SYSVDD + +Example: + +lochnagar { + lochnagar-micvdd: MICVDD { + compatible = "cirrus,lochnagar2-micvdd"; + + SYSVDD-supply = <&wallvdd>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lochnagar-vdd1v8: VDD1V8 { + compatible = "regulator-fixed"; + + regulator-name = "VDD1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + + vin-supply = <&wallvdd>; + }; +}; + diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt new file mode 100644 index 000000000000..b8f843fa6092 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -0,0 +1,143 @@ +MCP16502 PMIC + +Required properties: +- compatible: "microchip,mcp16502" +- reg: I2C slave address +- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during + suspend-to-ram, keeping the PMIC into HIBERNATE mode. +- regulators: A node that houses a sub-node for each regulator within + the device. Each sub-node is identified using the node's + name. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Regualtors of MCP16502 PMIC: +1) VDD_IO - Buck (1.2 - 3.7 V) +2) VDD_DDR - Buck (0.6 - 1.85 V) +3) VDD_CORE - Buck (0.6 - 1.85 V) +4) VDD_OTHER - BUCK (0.6 - 1.85 V) +5) LDO1 - LDO (1.2 - 3.7 V) +6) LDO2 - LDO (1.2 - 3.7 V) + +Regulator modes: +2 - FPWM: higher precision, higher consumption +4 - AutoPFM: lower precision, lower consumption + +Each regulator is defined using the standard binding for regulators. + +Example: + +mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>; + + regulators { + VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index a7cd36877bfe..0a3f087d5844 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -33,13 +33,16 @@ Optional properties: decreases of any level. This is useful for regulators with exponential voltage changes. - regulator-soft-start: Enable soft start so that voltage ramps slowly +- regulator-state-standby sub-root node for Standby mode + : equivalent with standby Linux sleep state, which provides energy savings + with a relatively quick transition back time. - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, only some external interrupt can wake the device. - regulator-state-disk sub-root node for Suspend-to-DISK mode : suspend to disk, this state operates similarly to Suspend-to-RAM, but includes a final step of writing memory contents to disk. -- regulator-state-[mem/disk] node has following common properties: +- regulator-state-[mem/disk/standby] node has following common properties: - regulator-on-in-suspend: regulator should be on in suspend state. - regulator-off-in-suspend: regulator should be off in suspend state. - regulator-suspend-min-microvolt: minimum voltage may be set in @@ -76,8 +79,11 @@ Optional properties: - regulator-coupled-with: Regulators with which the regulator is coupled. The linkage is 2-way - all coupled regulators should be linked with each other. A regulator should not be coupled with its supplier. -- regulator-coupled-max-spread: Max spread between voltages of coupled regulators - in microvolts. +- regulator-coupled-max-spread: Array of maximum spread between voltages of + coupled regulators in microvolts, each value in the array relates to the + corresponding couple specified by the regulator-coupled-with property. +- regulator-max-step-microvolt: Maximum difference between current and target + voltages that can be changed safely in a single step. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt new file mode 100644 index 000000000000..d483a2103d70 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt @@ -0,0 +1,24 @@ +* Xen hypervisor reserved-memory binding + +Expose one or more memory regions as reserved-memory to the guest +virtual machine. Typically, a region is configured at VM creation time +to be a shared memory area across multiple virtual machines for +communication among them. + +For each of these pre-shared memory regions, a range is exposed under +the /reserved-memory node as a child node. Each range sub-node is named +xen-shmem@<address> and has the following properties: + +- compatible: + compatible = "xen,shared-memory-v1" + +- reg: + the base guest physical address and size of the shared memory region + +- xen,offset: (borrower VMs only) + 64 bit integer offset within the owner virtual machine's shared + memory region used for the mapping in the borrower VM. + +- xen,id: + a string that identifies the shared memory region as specified in + the VM config file diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt index 366b99bff8cd..2bc89f133701 100644 --- a/Documentation/devicetree/bindings/rng/mtk-rng.txt +++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt @@ -1,9 +1,10 @@ Device-Tree bindings for Mediatek random number generator -found in Mediatek SoC family +found in MediaTek SoC family Required properties: - compatible : Should be "mediatek,mt7622-rng", "mediatek,mt7623-rng" : for MT7622 + "mediatek,mt7629-rng", "mediatek,mt7623-rng" : for MT7629 "mediatek,mt7623-rng" : for MT7623 - clocks : list of clock specifiers, corresponding to entries in clock-names property; diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt new file mode 100644 index 000000000000..7c8da6926095 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc.txt @@ -0,0 +1,64 @@ +Generic device tree bindings for Real Time Clock devices +======================================================== + +This document describes generic bindings which can be used to describe Real Time +Clock devices in a device tree. + +Required properties +------------------- + +- compatible : name of RTC device following generic names recommended practice. + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. + +Optional properties +------------------- + +- start-year : if provided, the default hardware range supported by the RTC is + shifted so the first usable year is the specified one. + +The following properties may not be supported by all drivers. However, if a +driver wants to support one of the below features, it should adapt the bindings +below. +- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given + if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled +- wakeup-source : Enables wake up of host system on alarm + +Trivial RTCs +------------ + +This is a list of trivial RTC devices that have simple device tree +bindings, consisting only of a compatible field, an address and +possibly an interrupt line. + + +Compatible Vendor / Chip +========== ============= +abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface +dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output +dallas,ds1672 Dallas DS1672 Real-time Clock +dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM +epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +emmicro,em3027 EM Microelectronic EM3027 Real-time Clock +isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM +isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM +isil,isl12022 Intersil ISL12022 Real-time Clock +microcrystal,rv3029 Real Time Clock Module with I2C-Bus +nxp,pcf2127 Real-time clock +nxp,pcf2129 Real-time clock +nxp,pcf8523 Real-time Clock +nxp,pcf8563 Real-time clock/calendar +nxp,pcf85063 Tiny Real-Time Clock +pericom,pt7c4338 Real-time Clock Module +ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +sii,s35390a 2-wire CMOS real-time clock diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index aeb6db4e35c3..da50321da34d 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -51,6 +51,7 @@ Optional properties: - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs +- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. Note: * fsl,ns16550: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index 6bd3f2e93d61..21483ba820bc 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -8,6 +8,8 @@ Required properties: on LS1021A SoC with 32-bit big-endian register organization - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated on i.MX7ULP SoC with 32-bit little-endian register organization + - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated + on i.MX8QXP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt index 3acbd309ab9d..40e81a5818f6 100644 --- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt +++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt @@ -6,8 +6,23 @@ Required properties: - interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier depends on the interrupt-parent interrupt controller. +Optional properties: +- clocks: Should contain frequency clock and gate clock +- clock-names: Should be "freq" and "asc" + Example: +asc0: serial@16600000 { + compatible = "lantiq,asc"; + reg = <0x16600000 0x100000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>; + clock-names = "freq", "asc"; +}; + asc1: serial@e100c00 { compatible = "lantiq,asc"; reg = <0xE100C00 0x400>; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index e52e16c6bc57..20232ad05d89 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -24,6 +24,10 @@ Required properties: - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. + - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. + - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. + - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. + - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. @@ -61,13 +65,13 @@ Required properties: - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART, + - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, + - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, + - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, + - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART, + - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, + - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt index deca5e18f304..ae5f7f057dc3 100644 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ b/Documentation/devicetree/bindings/sound/ak4104.txt @@ -12,8 +12,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the device starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the device starts. Example: diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt new file mode 100644 index 000000000000..6e11a2f7404c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4118.txt @@ -0,0 +1,22 @@ +AK4118 S/PDIF transceiver + +This device supports I2C mode. + +Required properties: + +- compatible : "asahi-kasei,ak4118" +- reg : The I2C address of the device for I2C +- reset-gpios: A GPIO specifier for the reset pin +- irq-gpios: A GPIO specifier for the IRQ pin + +Example: + +&i2c { + ak4118: ak4118@13 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4118"; + reg = <0x13>; + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW> + irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt new file mode 100644 index 000000000000..2e6cb7d9b202 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt @@ -0,0 +1,22 @@ +* Amlogic Audio SPDIF Input + +Required properties: +- compatible: 'amlogic,axg-spdifin' +- interrupts: interrupt specifier for the spdif input. +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "refclk" : spdif input reference clock +- #sound-dai-cells: must be 0. + +Example on the A113 SoC: + +spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 7e63e53a901c..269682619a70 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -32,7 +32,9 @@ Required properties: Optional properties: - pa-gpios: GPIO used to control external amplifier. +----------------------- Example: Single DAI case +----------------------- sound_card { compatible = "audio-graph-card"; @@ -61,7 +63,9 @@ Example: Single DAI case }; }; +----------------------- Example: Multi DAI case +----------------------- sound-card { compatible = "audio-graph-card"; @@ -130,3 +134,204 @@ Example: Multi DAI case }; }; + +----------------------- +Example: Sampling Rate Conversion +----------------------- + + sound_card { + compatible = "audio-graph-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "DAI0 Capture", "codec Capture"; + convert-rate = <48000>; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + +----------------------- +Example: 2 CPU 1 Codec (Mixing) +----------------------- + + sound_card { + compatible = "audio-graph-card"; + + label = "sound-card"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + + audio-graph-card,prefix = "codec"; + audio-graph-card,convert-rate = <48000>; + port { + reg = <0>; + codec_endpoint0: endpoint@0 { + remote-endpoint = <&cpu_endpoint0>; + }; + codec_endpoint1: endpoint@1 { + remote-endpoint = <&cpu_endpoint1>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint0: endpoint@0 { + remote-endpoint = <&codec_endpoint0>; + + dai-format = "left_j"; + ... + }; + cpu_endpoint1: endpoint@1 { + remote-endpoint = <&codec_endpoint1>; + + dai-format = "left_j"; + ... + }; + }; + }; + +----------------------- +Example: Multi DAI with DPCM +----------------------- + + CPU0 ------ ak4613 + CPU1 ------ HDMI + CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */ + CPU3 --/ /* DPCM 3ch/4ch */ + CPU4 --/ /* DPCM 5ch/6ch */ + CPU5 --/ /* DPCM 7ch/8ch */ + CPU6 ------ PCM3168A-c + + sound_card: sound { + compatible = "audio-graph-card"; + + label = "sound-card"; + + routing = "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback", + "pcm3168a Playback", "DAI5 Playback"; + + dais = <&snd_port0 /* ak4613 */ + &snd_port1 /* HDMI0 */ + &snd_port2 /* pcm3168a playback */ + &snd_port3 /* pcm3168a capture */ + >; + }; + + ak4613: codec@10 { + ... + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; + + pcm3168a: audio-codec@44 { + ... + audio-graph-card,prefix = "pcm3168a"; + audio-graph-card,convert-channels = <8>; /* TDM Split */ + ports { + port@0 { + reg = <0>; + pcm3168a_endpoint_p1: endpoint@1 { + remote-endpoint = <&rsnd_endpoint2>; + ... + }; + pcm3168a_endpoint_p2: endpoint@2 { + remote-endpoint = <&rsnd_endpoint3>; + ... + }; + pcm3168a_endpoint_p3: endpoint@3 { + remote-endpoint = <&rsnd_endpoint4>; + ... + }; + pcm3168a_endpoint_p4: endpoint@4 { + remote-endpoint = <&rsnd_endpoint5>; + ... + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_endpoint6>; + ... + }; + }; + }; + }; + + &sound { + ports { + snd_port0: port@0 { + rsnd_endpoint0: endpoint { + remote-endpoint = <&ak4613_endpoint>; + ... + }; + }; + snd_port1: port@1 { + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + ... + }; + }; + snd_port2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + rsnd_endpoint2: endpoint@2 { + remote-endpoint = <&pcm3168a_endpoint_p1>; + ... + }; + rsnd_endpoint3: endpoint@3 { + remote-endpoint = <&pcm3168a_endpoint_p2>; + ... + }; + rsnd_endpoint4: endpoint@4 { + remote-endpoint = <&pcm3168a_endpoint_p3>; + ... + }; + rsnd_endpoint5: endpoint@5 { + remote-endpoint = <&pcm3168a_endpoint_p4>; + ... + }; + }; + snd_port3: port@6 { + rsnd_endpoint6: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + ... + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 441dd6f29df1..62d42768a00b 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -77,11 +77,9 @@ Example 2. 2 CPU 1 Codec (Mixing) compatible = "audio-graph-scu-card"; label = "sound-card"; - prefix = "codec"; routing = "codec Playback", "DAI0 Playback", "codec Playback", "DAI1 Playback", "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; dais = <&cpu_port0 &cpu_port1>; @@ -90,6 +88,8 @@ Example 2. 2 CPU 1 Codec (Mixing) audio-codec { ... + audio-graph-card,prefix = "codec"; + audio-graph-card,convert-rate = <48000>; port { codec_endpoint0: endpoint { remote-endpoint = <&cpu_endpoint0>; diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt index 6b222f9b8ef5..c33770ec4c3c 100644 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -10,8 +10,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. Example: diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index 46bc9829c71a..b279b6072bd5 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -30,6 +30,11 @@ Optional properties: - ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 - tx-num-evt : FIFO levels. - rx-num-evt : FIFO levels. +- dismod : Specify the drive on TX pin during inactive slots + 0 : 3-state + 2 : logic low + 3 : logic high + Defaults to 'logic low' when the property is not present - sram-size-playback : size of sram to be allocated during playback - sram-size-capture : size of sram to be allocated during capture - interrupts : Interrupt numbers for McASP diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt index e957b4136716..32e871037269 100644 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -9,6 +9,7 @@ Optional properties: - dmicen-gpios: GPIO specifier for dmic to control start and stop - num-channels: Number of microphones on this DAI - wakeup-delay-ms: Delay (in ms) after enabling the DMIC + - modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch Example node: @@ -17,4 +18,5 @@ Example node: dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; num-channels = <1>; wakeup-delay-ms <50>; + modeswitch-delay-ms <35>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index dd9e59738e08..2e726b983845 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -35,13 +35,13 @@ Required properties: - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating that SAI will work in the synchronous mode (sync Tx - with Rx) which means both the transimitter and the + with Rx) which means both the transmitter and the receiver will send and receive data by following receiver's bit clocks and frame sync clocks. - fsl,sai-asynchronous: This is a boolean property. If present, indicating that SAI will work in the asynchronous mode, which - means both transimitter and receiver will send and + means both transmitter and receiver will send and receive data by following their own bit clocks and frame sync clocks separately. @@ -58,8 +58,8 @@ Optional properties (for mx6ul): Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both - transimitter and receiver will send and receive data by following clocks - of transimitter. + transmitter and receiver will send and receive data by following clocks + of transmitter. - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive. Example: diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt index 5f4e68ca228c..ff98a0cb5b3f 100644 --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -7,6 +7,8 @@ Required properties: <L3 interconnect address, size>; - interrupts: Interrupt number for McPDM - ti,hwmods: Name of the hwmod associated to the McPDM +- clocks: phandle for the pdmclk provider, likely <&twl6040> +- clock-names: Must be "pdmclk" Example: @@ -18,3 +20,11 @@ mcpdm: mcpdm@40132000 { interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; + +In board DTS file the pdmclk needs to be added: + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt index 90fcb8523099..97de66932d44 100644 --- a/Documentation/devicetree/bindings/sound/pcm3060.txt +++ b/Documentation/devicetree/bindings/sound/pcm3060.txt @@ -9,9 +9,15 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. +Optional properties: + +- ti,out-single-ended: "true" if output is single-ended; + "false" or not specified if output is differential. + Examples: pcm3060: pcm3060@46 { compatible = "ti,pcm3060"; reg = <0x46>; + ti,out-single-ended = "true"; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index f9c7bd8c1bc0..9f5378c51686 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -27,6 +27,28 @@ used by the apr service device. Value type: <u32> Definition: Must be 1 +== ASM DAI is subnode of "dais" and represent a dai, it includes board specific +configuration of each dai. Must contain the following properties. + +- reg + Usage: required + Value type: <u32> + Definition: Must be dai id + +- direction: + Usage: Required for Compress offload dais + Value type: <u32> + Definition: Specifies the direction of the dai stream + 0 for both tx and rx + 1 for only tx (Capture/Encode) + 2 for only rx (Playback/Decode) + +- is-compress-dai: + Usage: Required for Compress offload dais + Value type: <boolean> + Definition: present for Compress offload dais + + = EXAMPLE q6asm@7 { @@ -35,5 +57,10 @@ q6asm@7 { q6asmdai: dais { compatible = "qcom,q6asm-dais"; #sound-dai-cells = <1>; + mm@0 { + reg = <0>; + direction = <2>; + is-compress-dai; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index d92b705e7917..648d43e1b1e9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -39,15 +39,7 @@ This is example of Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec] Capture: [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec] - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; - }; - }; - }; +see "Example: simple sound card" You can use below. ${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example. @@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------ -You need to use "simple-scu-audio-card" sound card for it. -example) - - sound { - compatible = "simple-scu-audio-card"; - ... - /* - * SRC Asynchronous mode setting - * Playback: - * All input data will be converted to 48kHz - * Capture: - * Inputed 48kHz data will be converted to - * system specified Hz - */ - simple-audio-card,convert-rate = <48000>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. +see "Example: simple sound card for Asynchronous mode" ------------------ ** Synchronous mode @@ -141,26 +112,8 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header -You need to use "simple-scu-audio-card" sound card for it. -example) - - sound { - compatible = "simple-scu-audio-card"; - ... - /* - * CTU setting - * All input data will be converted to 2ch - * as output data - */ - simple-audio-card,convert-channels = <2>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. +see "Example: simple sound card for channel convert" Ex) Exchange output channel Input -> Output @@ -190,42 +143,13 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav -You need to use "simple-scu-audio-card" sound card for it. +You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+ - sound { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "simple-scu-audio-card"; - ... - simple-audio-card,cpu@0 { - reg = <0>; - sound-dai = <&rcar_sound 0>; - }; - simple-audio-card,cpu@1 { - reg = <1>; - sound-dai = <&rcar_sound 1>; - }; - simple-audio-card,codec { - ... - }; - }; - - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; - }; - dai1 { - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; - }; - }; - }; +see "Example: simple sound card for MIXer" ============================================= * DVC (Digital Volume and Mute Function) @@ -257,15 +181,31 @@ Volume Ramp * SSIU (Serial Sound Interface Unit) ============================================= -There is no DT settings for SSIU, because SSIU will be automatically -selected via SSI. SSIU can avoid some under/over run error, because it has some buffer. But you can't use it if SSI was PIO mode. -In DMA mode, you can select not to use SSIU by using "no-busif" on DT. +In DMA mode, you can select not to use SSIU by using "no-busif" via SSI. - &ssi0 { - no-busif; - }; +SSIU handles BUSIF which will be used for TDM Split mode. +This driver is assuming that audio-graph card will be used. + +TDM Split mode merges 4 sounds. You can see 4 sound interface on system, +and these sounds will be merged SSIU/SSI. + + aplay -D plughw:0,0 xxxx.wav & + aplay -D plughw:0,1 xxxx.wav & + aplay -D plughw:0,2 xxxx.wav & + aplay -D plughw:0,3 xxxx.wav + + 2ch 8ch + [MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec] + 2ch | + [MEM] -> [SSIU 31] -+ + 2ch | + [MEM] -> [SSIU 32] -+ + 2ch | + [MEM] -> [SSIU 33] -+ + +see "Example: simple sound card for TDM Split" ============================================= * SSI (Serial Sound Interface) @@ -304,14 +244,7 @@ This is example if SSI1 want to share WS pin with SSI0 You can use Multi-SSI. This is example of SSI0/SSI1/SSI2 (= for 6ch) - &rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>; - }; - }; - }; +see "Example: simple sound card for Multi channel" ** TDM-SSI @@ -319,19 +252,7 @@ You can use TDM with SSI. This is example of TDM 6ch. Driver can automatically switches TDM <-> stereo mode in this case. - rsnd_tdm: sound { - compatible = "simple-audio-card"; - ... - simple-audio-card,cpu { - /* system can use TDM 6ch */ - dai-tdm-slot-num = <6>; - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; - }; - +see "Example: simple sound card for TDM" ============================================= Required properties: @@ -346,6 +267,7 @@ Required properties: - "renesas,rcar_sound-r8a7744" (RZ/G1N) - "renesas,rcar_sound-r8a7745" (RZ/G1E) - "renesas,rcar_sound-r8a774a1" (RZ/G2M) + - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7779" (R-Car H1) - "renesas,rcar_sound-r8a7790" (R-Car H2) @@ -356,6 +278,7 @@ Required properties: - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - "renesas,rcar_sound-r8a77990" (R-Car E3) + - "renesas,rcar_sound-r8a77995" (R-Car D3) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 @@ -363,6 +286,9 @@ Required properties: - rcar_sound,ssi : Should contain SSI feature. The number of SSI subnode should be same as HW. see below for detail. +- rcar_sound,ssiu : Should contain SSIU feature. + The number of SSIU subnode should be same as HW. + see below for detail. - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. @@ -402,8 +328,13 @@ SSI subnode properties: - no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case - dma : Should contain Audio DMAC entry - dma-names : SSI case "rx" (=playback), "tx" (=capture) + Deprecated: see SSIU subnode properties SSIU case "rxu" (=playback), "txu" (=capture) +SSIU subnode properties: +- dma : Should contain Audio DMAC entry +- dma-names : "rx" (=playback), "tx" (=capture) + SRC subnode properties: - dma : Should contain Audio DMAC entry - dma-names : "rx" (=playback), "tx" (=capture) @@ -532,56 +463,55 @@ rcar_sound: sound@ec500000 { }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + + ... + + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; + + ... + ssi8: ssi-8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; @@ -647,25 +577,174 @@ Example: simple sound card }; ============================================= +Example: simple sound card for Asynchronous mode +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + /* + * SRC Asynchronous mode setting + * Playback: + * All input data will be converted to 48kHz + * Capture: + * Inputed 48kHz data will be converted to + * system specified Hz + */ + simple-audio-card,convert-rate = <48000>; + ... + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + simple-audio-card,codec { + ... + }; +}; + +============================================= +Example: simple sound card for channel convert +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + /* + * CTU setting + * All input data will be converted to 2ch + * as output data + */ + simple-audio-card,convert-channels = <2>; + ... + simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + simple-audio-card,codec { + ... + }; +}; + +============================================= +Example: simple sound card for MIXer +============================================= + +sound { + compatible = "simple-scu-audio-card"; + ... + simple-audio-card,cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + simple-audio-card,cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + simple-audio-card,codec { + ... + }; +}; + +&rcar_sound { + ... + rcar_sound,dai { + dai0 { + playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; + }; + dai1 { + playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; + }; + }; +}; + +============================================= Example: simple sound card for TDM ============================================= - rsnd_tdm: sound { - compatible = "simple-audio-card"; +rsnd_tdm: sound { + compatible = "simple-audio-card"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - dai-tdm-slot-num = <6>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + dai-tdm-slot-num = <6>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&xxx>; + }; +}; + +============================================= +Example: simple sound card for TDM Split +============================================= + +sound_card: sound { + compatible = "audio-graph-scu-card"; + prefix = "xxxx"; + routing = "xxxx Playback", "DAI0 Playback", + "xxxx Playback", "DAI1 Playback", + "xxxx Playback", "DAI2 Playback", + "xxxx Playback", "DAI3 Playback"; + convert-channels = <8>; /* TDM Split */ + + dais = <&rsnd_port0 /* playback ch1/ch2 */ + &rsnd_port1 /* playback ch3/ch4 */ + &rsnd_port2 /* playback ch5/ch6 */ + &rsnd_port3 /* playback ch7/ch8 */ + >; +}; + +audio-codec { + ... + port { + codec_0: endpoint@1 { + remote-endpoint = <&rsnd_ep0>; + }; + codec_1: endpoint@2 { + remote-endpoint = <&rsnd_ep1>; + }; + codec_2: endpoint@3 { + remote-endpoint = <&rsnd_ep2>; + }; + codec_3: endpoint@4 { + remote-endpoint = <&rsnd_ep3>; }; + }; +}; - sndcodec: simple-audio-card,codec { - sound-dai = <&xxx>; +&rcar_sound { + ... + ports { + rsnd_port0: port@0 { + rsnd_ep0: endpoint { + remote-endpoint = <&codec_0>; + ... + playback = <&ssiu30 &ssi3>; + }; + }; + rsnd_port1: port@1 { + rsnd_ep1: endpoint { + remote-endpoint = <&codec_1>; + ... + playback = <&ssiu31 &ssi3>; + }; + }; + rsnd_port2: port@2 { + rsnd_ep2: endpoint { + remote-endpoint = <&codec_2>; + ... + playback = <&ssiu32 &ssi3>; + }; + }; + rsnd_port3: port@3 { + rsnd_ep3: endpoint { + remote-endpoint = <&codec_3>; + ... + playback = <&ssiu33 &ssi3>; + }; }; }; +}; ============================================= Example: simple sound card for Multi channel diff --git a/Documentation/devicetree/bindings/sound/rt5631.txt b/Documentation/devicetree/bindings/sound/rt5631.txt index 92b986ca337b..56bc85232c49 100644 --- a/Documentation/devicetree/bindings/sound/rt5631.txt +++ b/Documentation/devicetree/bindings/sound/rt5631.txt @@ -35,14 +35,14 @@ Pins on the device (for linking into audio routes): Example: -alc5631: alc5631@1a { +alc5631: audio-codec@1a { compatible = "realtek,alc5631"; reg = <0x1a>; }; or -rt5631: rt5631@1a { +rt5631: audio-codec@1a { compatible = "realtek,rt5631"; reg = <0x1a>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 23386446c63d..2a55e9133408 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -10,6 +10,10 @@ Required properties: - interrupts : The CODEC's interrupt output. +- avdd-supply: Power supply for AVDD, providing 1.8V. + +- cpvdd-supply: Power supply for CPVDD, providing 3.5V. + Optional properties: - "realtek,dc_offset_l_manual" @@ -51,4 +55,6 @@ rt5663: codec@12 { compatible = "realtek,rt5663"; reg = <0x12>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&pp1800_a_alc5662>; + cpvdd-supply = <&pp3500_a_alc5662>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt index 8647edae7af0..7182ac4f1e65 100644 --- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt +++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt @@ -4,9 +4,14 @@ Required properties: - compatible : "dioo,dio2125" or "simple-audio-amplifier" - enable-gpios : the gpio connected to the enable pin of the simple amplifier +Optional properties: +- VCC-supply : power supply for the device, as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + Example: amp: analog-amplifier { compatible = "simple-audio-amplifier"; + VCC-supply = <®ulator>; enable-gpios = <&gpio GPIOH_3 0>; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index a4c72d09cd45..4629c8f8a6b6 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -95,7 +95,9 @@ Optional CPU/CODEC subnodes properties: initialization. It is useful for some aCPUs with fixed clocks. +------------------------------------------- Example 1 - single DAI link: +------------------------------------------- sound { compatible = "simple-audio-card"; @@ -138,7 +140,9 @@ sh_fsi2: sh_fsi2@ec230000 { interrupts = <0 146 0x4>; }; +------------------------------------------- Example 2 - many DAI links: +------------------------------------------- sound { compatible = "simple-audio-card"; @@ -176,8 +180,10 @@ sound { }; }; +------------------------------------------- Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec through TPA6130A2 amplifier to headphones: +------------------------------------------- &i2c0 { codec: tlv320dac3100@18 { @@ -210,3 +216,134 @@ sound { clocks = ... }; }; + +------------------------------------------- +Example 4. Sampling Rate Conversion +------------------------------------------- + +sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + simple-audio-card,convert-rate = <48000>; + + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4642 Capture"; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; +}; + +------------------------------------------- +Example 5. 2 CPU 1 Codec (Mixing) +------------------------------------------- +sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; + + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "ak4642 Playback", "DAI1 Playback"; + + dpcmcpu: cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + + cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + + codec { + prefix = "ak4642"; + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; +}; + +------------------------------------------- +Example 6 - many DAI links with DPCM: +------------------------------------------- + +CPU0 ------ ak4613 +CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */ +CPU2 --/ /* DPCM 3ch/4ch */ +CPU3 --/ /* DPCM 5ch/6ch */ +CPU4 --/ /* DPCM 7ch/8ch */ +CPU5 ------ PCM3168A-c + +sound { + compatible = "simple-audio-card"; + + simple-audio-card,routing = + "pcm3168a Playback", "DAI1 Playback", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback"; + + simple-audio-card,dai-link@0 { + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&rcar_sound 0>; + }; + codec { + sound-dai = <&ak4613>; + }; + }; + simple-audio-card,dai-link@1 { + format = "i2s"; + bitclock-master = <&sndcpu1>; + frame-master = <&sndcpu1>; + + convert-channels = <8>; /* TDM Split */ + + sndcpu1: cpu@0 { + sound-dai = <&rcar_sound 1>; + }; + cpu@1 { + sound-dai = <&rcar_sound 2>; + }; + cpu@2 { + sound-dai = <&rcar_sound 3>; + }; + cpu@3 { + sound-dai = <&rcar_sound 4>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + dai-tdm-slot-num = <8>; + sound-dai = <&pcm3168a 0>; + }; + }; + simple-audio-card,dai-link@2 { + format = "i2s"; + bitclock-master = <&sndcpu2>; + frame-master = <&sndcpu2>; + + sndcpu2: cpu { + sound-dai = <&rcar_sound 5>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + sound-dai = <&pcm3168a 1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index 32f8dbce5241..3a2f71616cda 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -75,7 +75,6 @@ sound { simple-audio-card,bitclock-master = <&dpcmcpu>; simple-audio-card,frame-master = <&dpcmcpu>; - simple-audio-card,prefix = "ak4642"; simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", "ak4642 Playback", "DAI1 Playback"; @@ -88,6 +87,7 @@ sound { }; codec { + prefix = "ak4642"; sound-dai = <&ak4643>; clocks = <&audio_clock>; }; diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt index 4f8ad0e04d20..056a098495cc 100644 --- a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt @@ -4,9 +4,11 @@ Required properties: - compatible: must be one of the following compatibles: - "allwinner,sun50i-a64-codec-analog" - reg: must contain the registers location and length +- cpvdd-supply: Regulator supply for the headphone amplifier Example: codec_analog: codec-analog@1f015c0 { compatible = "allwinner,sun50i-a64-codec-analog"; reg = <0x01f015c0 0x4>; + cpvdd-supply = <®_eldo1>; }; diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt new file mode 100644 index 000000000000..5e7c7d5bb60a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt @@ -0,0 +1,28 @@ +Device-Tree bindings for Xilinx I2S PL block + +The IP supports I2S based playback/capture audio + +Required property: + - compatible: "xlnx,i2s-transmitter-1.0" for playback and + "xlnx,i2s-receiver-1.0" for capture + +Required property common to both I2S playback and capture: + - reg: Base address and size of the IP core instance. + - xlnx,dwidth: sample data width. Can be any of 16, 24. + - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4. + supported channels = 2 * xlnx,num-channels + +Example: + + i2s_receiver@a0080000 { + compatible = "xlnx,i2s-receiver-1.0"; + reg = <0x0 0xa0080000 0x0 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; + i2s_transmitter@a0090000 { + compatible = "xlnx,i2s-transmitter-1.0"; + reg = <0x0 0xa0090000 0x0 0x10000>; + xlnx,dwidth = <0x18>; + xlnx,num-channels = <1>; + }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt index b93c1e2f25dd..b93c1e2f25dd 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt new file mode 100644 index 000000000000..1fd9a4406a1d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt @@ -0,0 +1,43 @@ +Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver + +Nuvoton NPCM7xx SOC support two PSPI channels. + +Required properties: + - compatible : "nuvoton,npcm750-pspi" for NPCM7XX BMC + - #address-cells : should be 1. see spi-bus.txt + - #size-cells : should be 0. see spi-bus.txt + - specifies physical base address and size of the register. + - interrupts : contain PSPI interrupt. + - clocks : phandle of PSPI reference clock. + - clock-names: Should be "clk_apb5". + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + - cs-gpios: Specifies the gpio pins to be used for chipselects. + See: Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- clock-frequency : Input clock frequency to the PSPI block in Hz. + Default is 25000000 Hz. + +Aliases: +- All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' withe the correct numbered in "aliases" node. + +Example: + +aliases { + spi0 = &spi0; +}; + +spi0: spi@f0200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0xf0200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt index 2ba5f9c023ac..487208c256c0 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt @@ -2,6 +2,7 @@ OMAP2+ McSPI device Required properties: - compatible : + - "ti,am654-mcspi" for AM654. - "ti,omap2-mcspi" for OMAP2 & OMAP3. - "ti,omap4-mcspi" for OMAP4+. - ti,spi-num-cs : Number of chipselect supported by the instance. diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 4b836ad17b19..37cf69586d10 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -5,6 +5,7 @@ Required properties: "renesas,msiof-r8a7744" (RZ/G1N) "renesas,msiof-r8a7745" (RZ/G1E) "renesas,msiof-r8a774a1" (RZ/G2M) + "renesas,msiof-r8a774c0" (RZ/G2E) "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt index 8d178a4503cf..6cc3c6fe25a3 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt @@ -5,8 +5,11 @@ Required properties: - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc - reg : address and length of the lpspi master registers +- interrupt-parent : core interrupt controller - interrupts : lpspi interrupt - clocks : lpspi clock specifier +- spi-slave : spi slave mode support. In slave mode, add this attribute without + value. In master mode, remove it. Examples: @@ -16,4 +19,5 @@ lpspi2: lpspi@40290000 { interrupt-parent = <&intc>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7ULP_CLK_LPSPI2>; + spi-slave; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 236dcb0faf37..69c356767cf8 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -6,8 +6,10 @@ Required properties: - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms - mediatek,mt7622-spi: for mt7622 platforms + - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms + - mediatek,mt8183-spi: for mt8183 platforms - #address-cells: should be 1. diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt new file mode 100644 index 000000000000..529f2dab2648 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt @@ -0,0 +1,34 @@ +Macronix SPI controller Device Tree Bindings +-------------------------------------------- + +Required properties: +- compatible: should be "mxicy,mx25f0a-spi" +- #address-cells: should be 1 +- #size-cells: should be 0 +- reg: should contain 2 entries, one for the registers and one for the direct + mapping area +- reg-names: should contain "regs" and "dirmap" +- interrupts: interrupt line connected to the SPI controller +- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" +- clocks: should contain 3 entries for the "ps_clk", "send_clk" and + "send_dly_clk" clocks + +Example: + + spi@43c30000 { + compatible = "mxicy,mx25f0a-spi"; + reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>; + reg-names = "regs", "dirmap"; + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>; + clock-names = "send_clk", "send_dly_clk", "ps_clk"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt index 0335a9bd2e8a..e30e0c2a4bce 100644 --- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt @@ -11,6 +11,9 @@ Required properties: Optional properties: - cs-gpios: list of GPIO chip selects. See the SPI bus bindings, Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-slave: Empty property indicating the SPI controller is used in slave mode. +- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled + and we're ready to service a transfer. Only useful in slave mode. Child nodes represent devices on the SPI bus See ../spi/spi-bus.txt diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index fc97ad64fbf2..421722b93992 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -15,6 +15,7 @@ Required properties: - "renesas,qspi-r8a7743" (RZ/G1M) - "renesas,qspi-r8a7744" (RZ/G1N) - "renesas,qspi-r8a7745" (RZ/G1E) + - "renesas,qspi-r8a77470" (RZ/G1C) - "renesas,qspi-r8a7790" (R-Car H2) - "renesas,qspi-r8a7791" (R-Car M2-W) - "renesas,qspi-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..e1201573a29a 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -7,8 +7,11 @@ Required properties: - reg: address and length of the spi master registers - #address-cells: must be <1>, see spi-bus.txt - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device Example: @@ -17,6 +20,9 @@ spi0: spi@54006000 { reg = <0x54006000 0x100>; #address-cells = <1>; #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt b/Documentation/devicetree/bindings/timer/arm,arch_timer.txt deleted file mode 100644 index 68301b77e854..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt +++ /dev/null @@ -1,112 +0,0 @@ -* ARM architected timer - -ARM cores may have a per-core architected timer, which provides per-cpu timers, -or a memory mapped architected timer, which provides up to 8 frames with a -physical and optional virtual timer per frame. - -The per-core architected timer is attached to a GIC to deliver its -per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC -to deliver its interrupts via SPIs. - -** CP15 Timer node properties: - -- compatible : Should at least contain one of - "arm,armv7-timer" - "arm,armv8-timer" - -- interrupts : Interrupt list for secure, non-secure, virtual and - hypervisor timers, in that order. - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only where necessary to work around broken firmware which does not configure - CNTFRQ on all CPUs to a uniform correct value. Use of this property is - strongly discouraged; fix your firmware unless absolutely impossible. - -- always-on : a boolean property. If present, the timer is powered through an - always-on power domain, therefore it never loses context. - -- fsl,erratum-a008585 : A boolean property. Indicates the presence of - QorIQ erratum A-008585, which says that reading the counter is - unreliable unless the same value is returned by back-to-back reads. - This also affects writes to the tval register, due to the implicit - counter read. - -- hisilicon,erratum-161010101 : A boolean property. Indicates the - presence of Hisilicon erratum 161010101, which says that reading the - counters is unreliable in some cases, and reads may return a value 32 - beyond the correct value. This also affects writes to the tval - registers, due to the implicit counter read. - -** Optional properties: - -- arm,cpu-registers-not-fw-configured : Firmware does not initialize - any of the generic timer CPU registers, which contain their - architecturally-defined reset values. Only supported for 32-bit - systems which follow the ARMv7 architected reset values. - -- arm,no-tick-in-suspend : The main counter does not tick when the system is in - low-power system suspend on some SoCs. This behavior does not match the - Architecture Reference Manual's specification that the system counter "must - be implemented in an always-on power domain." - - -Example: - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - -** Memory mapped timer node properties: - -- compatible : Should at least contain "arm,armv7-timer-mem". - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only when firmware has not configured the MMIO CNTFRQ registers. - -- reg : The control frame base address. - -Note that #address-cells, #size-cells, and ranges shall be present to ensure -the CPU can address a frame's registers. - -A timer node has up to 8 frame sub-nodes, each with the following properties: - -- frame-number: 0 to 7. - -- interrupts : Interrupt list for physical and virtual timers in that order. - The virtual timer interrupt is optional. - -- reg : The first and second view base addresses in that order. The second view - base address is optional. - -- status : "disabled" indicates the frame is not available for use. Optional. - -Example: - - timer@f0000000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0xf0000000 0x1000>; - clock-frequency = <50000000>; - - frame@f0001000 { - frame-number = <0> - interrupts = <0 13 0x8>, - <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; - }; - - frame@f0003000 { - frame-number = <1> - interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml new file mode 100644 index 000000000000..6deead07728e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> +description: |+ + ARM cores may have a per-core architected timer, which provides per-cpu timers, + or a memory mapped architected timer, which provides up to 8 frames with a + physical and optional virtual timer per frame. + + The per-core architected timer is attached to a GIC to deliver its + per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC + to deliver its interrupts via SPIs. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,cortex-a15-timer + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv8-timer + + interrupts: + items: + - description: secure timer irq + - description: non-secure timer irq + - description: virtual timer irq + - description: hypervisor timer irq + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + fsl,erratum-a008585: + type: boolean + description: Indicates the presence of QorIQ erratum A-008585, which says + that reading the counter is unreliable unless the same value is returned + by back-to-back reads. This also affects writes to the tval register, due + to the implicit counter read. + + hisilicon,erratum-161010101: + type: boolean + description: Indicates the presence of Hisilicon erratum 161010101, which + says that reading the counters is unreliable in some cases, and reads may + return a value 32 beyond the correct value. This also affects writes to + the tval registers, due to the implicit counter read. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +required: + - compatible + +oneOf: + - required: + - interrupts + - required: + - interrupts-extended + +examples: + - | + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml new file mode 100644 index 000000000000..c4ab59550fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM memory mapped architected timer + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + - Mark Rutland <mark.rutland@arm.com> + +description: |+ + ARM cores may have a memory mapped architected timer, which provides up to 8 + frames with a physical and optional virtual timer per frame. + + The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs. + +properties: + compatible: + items: + - enum: + - arm,armv7-timer-mem + + reg: + maxItems: 1 + description: The control frame base address + + '#address-cells': + enum: [1, 2] + + '#size-cells': + const: 1 + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +patternProperties: + '^frame@[0-9a-z]*$': + description: A timer node has up to 8 frame sub-nodes, each with the following properties. + properties: + frame-number: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 7 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: physical timer irq + - description: virtual timer irq + + reg : + minItems: 1 + maxItems: 2 + items: + - description: 1st view base address + - description: 2nd optional view base address + + required: + - frame-number + - interrupts + - reg + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0>; + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1>; + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.txt b/Documentation/devicetree/bindings/timer/arm,global_timer.txt deleted file mode 100644 index bdae3a818793..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,global_timer.txt +++ /dev/null @@ -1,27 +0,0 @@ - -* ARM Global Timer - Cortex-A9 are often associated with a per-core Global timer. - -** Timer node required properties: - -- compatible : should contain - * "arm,cortex-a5-global-timer" for Cortex-A5 global timers. - * "arm,cortex-a9-global-timer" for Cortex-A9 global - timers or any compatible implementation. Note: driver - supports versions r2p0 and above. - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the GT timer - register window. - -- clocks : Should be phandle to a clock. - -Example: - - timer@2c000600 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - clocks = <&arm_periph_clk>; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml new file mode 100644 index 000000000000..21c24a8e28fd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,global_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Global Timer + +maintainers: + - Stuart Menefy <stuart.menefy@st.com> + +description: + Cortex-A9 are often associated with a per-core Global timer. + +properties: + compatible: + items: + - enum: + - arm,cortex-a5-global-timer + - arm,cortex-a9-global-timer + + description: driver supports versions r2p0 and above. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + timer@2c000600 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf01>; + clocks = <&arm_periph_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt new file mode 100644 index 000000000000..4db542c9a0fd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt @@ -0,0 +1,20 @@ +RDA Micro RDA8810PL Timer + +Required properties: +- compatible : "rda,8810pl-timer" +- reg : Offset and length of the register set for the device. +- interrupts : Should contain two interrupts. +- interrupt-names : Should be "hwtimer", "ostimer". + +Example: + + apb@20900000 { + compatible = "simple-bus"; + ... + timer@10000 { + compatible = "rda,8810pl-timer"; + reg = <0x10000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 33992679a8bd..862a80f0380a 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -28,6 +28,10 @@ Required Properties: - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744. - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. + - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470. + - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. + - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. + - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. @@ -36,6 +40,8 @@ Required Properties: - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. + - "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796. - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970. - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. @@ -47,9 +53,12 @@ Required Properties: and RZ/G1. These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries listed above. - - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3. - - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3. - These are fallbacks for R-Car Gen3 entries listed above. + - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3 + and RZ/G2. + - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3 + and RZ/G2. + These are fallbacks for R-Car Gen3 and RZ/G2 entries listed + above. - reg: base address and length of the registers block for the timer module. - interrupts: interrupt-specifier for the timer, one per channel. diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt deleted file mode 100644 index 6ab001fa1ed4..000000000000 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ /dev/null @@ -1,190 +0,0 @@ -This is a list of trivial i2c devices that have simple device tree -bindings, consisting only of a compatible field, an address and -possibly an interrupt line. - -If a device needs more specific bindings, such as properties to -describe some aspect of it, there needs to be a specific binding -document for it just like any other devices. - - -Compatible Vendor / Chip -========== ============= -abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface -ad,ad7414 SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin -ad,adm9240 ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems -adi,adt7461 +/-1C TDM Extended Temp Range I.C -adt7461 +/-1C TDM Extended Temp Range I.C -adi,adt7473 +/-1C TDM Extended Temp Range I.C -adi,adt7475 +/-1C TDM Extended Temp Range I.C -adi,adt7476 +/-1C TDM Extended Temp Range I.C -adi,adt7490 +/-1C TDM Extended Temp Range I.C -adi,adxl345 Three-Axis Digital Accelerometer -adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) -ams,iaq-core AMS iAQ-Core VOC Sensor -at,24c08 i2c serial eeprom (24cxx) -atmel,at97sc3204t i2c trusted platform module (TPM) -capella,cm32181 CM32181: Ambient Light Sensor -capella,cm3232 CM3232: Ambient Light Sensor -dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output -dallas,ds1631 High-Precision Digital Thermometer -dallas,ds1672 Dallas DS1672 Real-time Clock -dallas,ds1682 Total-Elapsed-Time Recorder with Alarm -dallas,ds1775 Tiny Digital Thermometer and Thermostat -dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM -dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O -dallas,ds75 Digital Thermometer and Thermostat -devantech,srf02 Devantech SRF02 ultrasonic ranger in I2C mode -devantech,srf08 Devantech SRF08 ultrasonic ranger -devantech,srf10 Devantech SRF10 ultrasonic ranger -dlg,da9053 DA9053: flexible system level PMIC with multicore support -dlg,da9063 DA9063: system PMIC for quad-core application processors -domintech,dmard09 DMARD09: 3-axis Accelerometer -domintech,dmard10 DMARD10: 3-axis Accelerometer -epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -emmicro,em3027 EM Microelectronic EM3027 Real-time Clock -fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor -fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer -fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor -fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller -fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec -gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface -infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) -infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) -infineon,tlv493d-a1b6 Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor -isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM -isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM -isil,isl12022 Intersil ISL12022 Real-time Clock -isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor -isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor -maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator -maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs -maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion -maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -mcube,mc3230 mCube 3-axis 8-bit digital accelerometer -memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer -microchip,mcp4017-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4017-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4017-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4017-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4018-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4018-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4018-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4018-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4019-502 Microchip 7-bit Single I2C Digital POT (5k) -microchip,mcp4019-103 Microchip 7-bit Single I2C Digital POT (10k) -microchip,mcp4019-503 Microchip 7-bit Single I2C Digital POT (50k) -microchip,mcp4019-104 Microchip 7-bit Single I2C Digital POT (100k) -microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4531-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4532-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4532-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4532-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4532-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4541-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4541-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4541-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4541-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4542-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4542-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4542-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4542-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4551-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4551-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4551-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4551-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4552-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) -microchip,mcp4552-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) -microchip,mcp4552-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) -microchip,mcp4552-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) -microchip,mcp4561-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4561-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4561-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4561-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4562-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4562-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4562-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4562-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4631-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4631-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4631-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4631-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4632-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4632-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4632-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4632-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4641-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4641-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4641-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4641-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4642-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4642-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4642-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4642-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4651-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4651-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4651-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4651-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4652-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) -microchip,mcp4652-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) -microchip,mcp4652-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) -microchip,mcp4652-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) -microchip,mcp4661-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4661-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4661-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4661-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) -microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) -microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) -microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) -microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection -microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection -microcrystal,rv3029 Real Time Clock Module with I2C-Bus -miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer -miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer -miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer -national,lm63 Temperature sensor with integrated fan control -national,lm75 I2C TEMP SENSOR -national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor -national,lm85 Temperature sensor with integrated fan control -national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface -nuvoton,npct501 i2c trusted platform module (TPM) -nuvoton,npct601 i2c trusted platform module (TPM2) -nuvoton,w83773g Nuvoton Temperature Sensor -nxp,pca9556 Octal SMBus and I2C registered interface -nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset -nxp,pcf2127 Real-time clock -nxp,pcf2129 Real-time clock -nxp,pcf8523 Real-time Clock -nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock -oki,ml86v7667 OKI ML86V7667 video decoder -ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus -pericom,pt7c4338 Real-time Clock Module -plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch -pulsedlight,lidar-lite-v2 Pulsedlight LIDAR range-finding sensor -ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) -sgx,vz89x SGX Sensortech VZ89X Sensors -sii,s35390a 2-wire CMOS real-time clock -silabs,si7020 Relative Humidity and Temperature Sensors -skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply -st,24c256 i2c serial eeprom (24cxx) -taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface -ti,ads7828 8-Channels, 12-bit ADC -ti,ads7830 8-Channels, 8-bit ADC -ti,amc6821 Temperature Monitoring and Fan Control -ti,tsc2003 I2C Touch-Screen Controller -ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -ti,tmp275 Digital Temperature Sensor -winbond,w83793 Winbond/Nuvoton H/W Monitor -winbond,wpct301 i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml new file mode 100644 index 000000000000..cc64ec63a6ad --- /dev/null +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -0,0 +1,342 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trivial-devices.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial I2C and SPI devices that have simple device tree bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + This is a list of trivial I2C and SPI devices that have simple device tree + bindings, consisting only of a compatible field, an address and possibly an + interrupt line. + + If a device needs more specific bindings, such as properties to + describe some aspect of it, there needs to be a specific binding + document for it just like any other devices. + +properties: + reg: + maxItems: 1 + interrupts: + maxItems: 1 + compatible: + items: + - enum: + # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin + - ad,ad7414 + # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems + - ad,adm9240 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7461 + # +/-1C TDM Extended Temp Range I.C + - adt7461 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7473 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7475 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7476 + # +/-1C TDM Extended Temp Range I.C + - adi,adt7490 + # Three-Axis Digital Accelerometer + - adi,adxl345 + # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) + - adi,adxl346 + # AMS iAQ-Core VOC Sensor + - ams,iaq-core + # i2c serial eeprom (24cxx) + - at,24c08 + # i2c trusted platform module (TPM) + - atmel,at97sc3204t + # CM32181: Ambient Light Sensor + - capella,cm32181 + # CM3232: Ambient Light Sensor + - capella,cm3232 + # High-Precision Digital Thermometer + - dallas,ds1631 + # Total-Elapsed-Time Recorder with Alarm + - dallas,ds1682 + # Tiny Digital Thermometer and Thermostat + - dallas,ds1775 + # CPU Supervisor with Nonvolatile Memory and Programmable I/O + - dallas,ds4510 + # Digital Thermometer and Thermostat + - dallas,ds75 + # Devantech SRF02 ultrasonic ranger in I2C mode + - devantech,srf02 + # Devantech SRF08 ultrasonic ranger + - devantech,srf08 + # Devantech SRF10 ultrasonic ranger + - devantech,srf10 + # DA9053: flexible system level PMIC with multicore support + - dlg,da9053 + # DA9063: system PMIC for quad-core application processors + - dlg,da9063 + # DMARD09: 3-axis Accelerometer + - domintech,dmard09 + # DMARD10: 3-axis Accelerometer + - domintech,dmard10 + # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor + - fsl,mma7660 + # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer + - fsl,mma8450 + # MPL3115: Absolute Digital Pressure Sensor + - fsl,mpl3115 + # MPR121: Proximity Capacitive Touch Sensor Controller + - fsl,mpr121 + # SGTL5000: Ultra Low-Power Audio Codec + - fsl,sgtl5000 + # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface + - gmt,g751 + # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) + - infineon,slb9635tt + # Infineon SLB9645 I2C TPM (new protocol, max 400khz) + - infineon,slb9645tt + # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor + - infineon,tlv493d-a1b6 + # Intersil ISL29028 Ambient Light and Proximity Sensor + - isil,isl29028 + # Intersil ISL29030 Ambient Light and Proximity Sensor + - isil,isl29030 + # 5 Bit Programmable, Pulse-Width Modulator + - maxim,ds1050 + # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs + - maxim,max1237 + # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion + - maxim,max6621 + # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface + - maxim,max6625 + # mCube 3-axis 8-bit digital accelerometer + - mcube,mc3230 + # MEMSIC 2-axis 8-bit digital accelerometer + - memsic,mxc6225 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4017-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4017-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4017-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4017-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4018-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4018-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4018-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4018-104 + # Microchip 7-bit Single I2C Digital POT (5k) + - microchip,mcp4019-502 + # Microchip 7-bit Single I2C Digital POT (10k) + - microchip,mcp4019-103 + # Microchip 7-bit Single I2C Digital POT (50k) + - microchip,mcp4019-503 + # Microchip 7-bit Single I2C Digital POT (100k) + - microchip,mcp4019-104 + # Microchip 7-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4531-502 + # Microchip 7-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4531-103 + # Microchip 7-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4531-503 + # Microchip 7-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4531-104 + # Microchip 7-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4532-502 + # Microchip 7-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4532-103 + # Microchip 7-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4532-503 + # Microchip 7-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4532-104 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4541-502 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4541-103 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4541-503 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4541-104 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4542-502 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4542-103 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4542-503 + # Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4542-104 + # Microchip 8-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4551-502 + # Microchip 8-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4551-103 + # Microchip 8-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4551-503 + # Microchip 8-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4551-104 + # Microchip 8-bit Single I2C Digital Potentiometer (5k) + - microchip,mcp4552-502 + # Microchip 8-bit Single I2C Digital Potentiometer (10k) + - microchip,mcp4552-103 + # Microchip 8-bit Single I2C Digital Potentiometer (50k) + - microchip,mcp4552-503 + # Microchip 8-bit Single I2C Digital Potentiometer (100k) + - microchip,mcp4552-104 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4561-502 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4561-103 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4561-503 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4561-104 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4562-502 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4562-103 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4562-503 + # Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4562-104 + # Microchip 7-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4631-502 + # Microchip 7-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4631-103 + # Microchip 7-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4631-503 + # Microchip 7-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4631-104 + # Microchip 7-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4632-502 + # Microchip 7-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4632-103 + # Microchip 7-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4632-503 + # Microchip 7-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4632-104 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4641-502 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4641-103 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4641-503 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4641-104 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4642-502 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4642-103 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4642-503 + # Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4642-104 + # Microchip 8-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4651-502 + # Microchip 8-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4651-103 + # Microchip 8-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4651-503 + # Microchip 8-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4651-104 + # Microchip 8-bit Dual I2C Digital Potentiometer (5k) + - microchip,mcp4652-502 + # Microchip 8-bit Dual I2C Digital Potentiometer (10k) + - microchip,mcp4652-103 + # Microchip 8-bit Dual I2C Digital Potentiometer (50k) + - microchip,mcp4652-503 + # Microchip 8-bit Dual I2C Digital Potentiometer (100k) + - microchip,mcp4652-104 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4661-502 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4661-103 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4661-503 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4661-104 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) + - microchip,mcp4662-502 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) + - microchip,mcp4662-103 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) + - microchip,mcp4662-503 + # Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) + - microchip,mcp4662-104 + # PWM Fan Speed Controller With Fan Fault Detection + - microchip,tc654 + # PWM Fan Speed Controller With Fan Fault Detection + - microchip,tc655 + # MiraMEMS DA226 2-axis 14-bit digital accelerometer + - miramems,da226 + # MiraMEMS DA280 3-axis 14-bit digital accelerometer + - miramems,da280 + # MiraMEMS DA311 3-axis 12-bit digital accelerometer + - miramems,da311 + # Temperature sensor with integrated fan control + - national,lm63 + # I2C TEMP SENSOR + - national,lm75 + # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor + - national,lm80 + # Temperature sensor with integrated fan control + - national,lm85 + # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface + - national,lm92 + # i2c trusted platform module (TPM) + - nuvoton,npct501 + # i2c trusted platform module (TPM2) + - nuvoton,npct601 + # Nuvoton Temperature Sensor + - nuvoton,w83773g + # Octal SMBus and I2C registered interface + - nxp,pca9556 + # 8-bit I2C-bus and SMBus I/O port with reset + - nxp,pca9557 + # OKI ML86V7667 video decoder + - oki,ml86v7667 + # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus + - ovti,ov5642 + # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch + - plx,pex8648 + # Pulsedlight LIDAR range-finding sensor + - pulsedlight,lidar-lite-v2 + # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) + - samsung,24ad0xd1 + # SGX Sensortech VZ89X Sensors + - sgx,vz89x + # Relative Humidity and Temperature Sensors + - silabs,si7020 + # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply + - skyworks,sky81452 + # i2c serial eeprom (24cxx) + - st,24c256 + # Ambient Light Sensor with SMBUS/Two Wire Serial Interface + - taos,tsl2550 + # 8-Channels, 12-bit ADC + - ti,ads7828 + # 8-Channels, 8-bit ADC + - ti,ads7830 + # Temperature Monitoring and Fan Control + - ti,amc6821 + # I2C Touch-Screen Controller + - ti,tsc2003 + # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface + - ti,tmp102 + # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface + - ti,tmp103 + # Digital Temperature Sensor + - ti,tmp275 + # Winbond/Nuvoton H/W Monitor + - winbond,w83793 + # i2c trusted platform module (TPM) + - winbond,wpct301 + +required: + - compatible + - reg + +... diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt new file mode 100644 index 000000000000..a04a4989ec7f --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt @@ -0,0 +1,31 @@ +* Cadence Universal Flash Storage (UFS) Controller + +UFS nodes are defined to describe on-chip UFS host controllers. +Each UFS controller instance should have its own node. +Please see the ufshcd-pltfrm.txt for a list of all available properties. + +Required properties: +- compatible : Compatible list, contains the following controller: + "cdns,ufshc" + complemented with the JEDEC version: + "jedec,ufs-2.0" + +- reg : Address and length of the UFS register set. +- interrupts : One interrupt mapping. +- freq-table-hz : Clock frequency table. + See the ufshcd-pltfrm.txt for details. +- clocks : List of phandle and clock specifier pairs. +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "core_clk" is mandatory. + Depending on a type of a PHY, + the "phy_clk" clock can also be added, if needed. + +Example: + ufs@fd030000 { + compatible = "cdns,ufshc", "jedec,ufs-2.0"; + reg = <0xfd030000 0x10000>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <0 0>, <0 0>; + clocks = <&ufs_core_clk>, <&ufs_phy_clk>; + clock-names = "core_clk", "phy_clk"; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 2df00524bd21..8cf59452c675 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -33,6 +33,12 @@ Optional properties: - clocks : List of phandle and clock specifier pairs - clock-names : List of clock input name strings sorted in the same order as the clocks property. + "ref_clk" indicates reference clock frequency. + UFS host supplies reference clock to UFS device and UFS device + specification allows host to provide one of the 4 frequencies (19.2 MHz, + 26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is + parsed and used to update the reference clock setting in device. + Defaults to 26 MHz(as per specification) if not specified by host. - freq-table-hz : Array of <min max> operating frequencies stored in the same order as the clocks property. If this property is not defined or a value in the array is "0" then it is assumed diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 529e51879fb2..adae82385dd6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -80,15 +80,19 @@ Optional properties: controller. It's expected that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode. - mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device" +- pinctrl-names: Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this + case, the "idle" state needs to pull down the data and strobe pin + and the "active" state needs to pull up the strobe pin. - pinctrl-n: alternate pin modes i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect -- over-current-active-high: over current signal polarity is high active, - typically over current signal polarity is low active. +- over-current-active-low: over current signal polarity is active low. +- over-current-active-high: over current signal polarity is active high. + It's recommended to specify the over current polarity. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: @@ -111,3 +115,29 @@ Example: mux-controls = <&usb_switch>; mux-control-names = "usb_switch"; }; + +Example for HSIC: + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: smsc@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 636630fb92d7..8e5265e9f658 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -37,7 +37,11 @@ Optional properties: - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - resets: a single pair of phandle and reset specifier + - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable + - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command + failure SW work-around for DWC_usb31 version 1.70a-ea06 + and prior. - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4b1a2a8fcc16..dbe926b6b78a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -67,6 +67,7 @@ capella Capella Microsystems, Inc cascoda Cascoda, Ltd. cavium Cavium, Inc. cdns Cadence Design Systems Inc. +cdtech CDTech(H.K.) Electronics Limited ceva Ceva, Inc. chipidea Chipidea, Inc chipone ChipOne @@ -170,6 +171,7 @@ holtek Holtek Semiconductor, Inc. hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) +icplus IC Plus Corp. idt Integrated Device Technologies, Inc. ifi Ingenieurburo Fur Ic-Technologie (I/F/I) ilitek ILI Technology Corporation (ILITEK) @@ -303,6 +305,7 @@ pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA plx Broadcom Corporation (formerly PLX Technology) +pni PNI Sensor Corporation portwell Portwell Inc. poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) @@ -415,6 +418,7 @@ vamrs Vamrs Ltd. variscite Variscite Ltd. via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium +vishay Vishay Intertechnology, Inc vitesse Vitesse Semiconductor Corporation vivante Vivante Corporation vocore VoCore Studio diff --git a/Documentation/devicetree/todo.txt b/Documentation/devicetree/todo.txt deleted file mode 100644 index b5139d1de811..000000000000 --- a/Documentation/devicetree/todo.txt +++ /dev/null @@ -1,10 +0,0 @@ -Todo list for devicetree: - -=== General structure === -- Switch from custom lists to (h)list_head for nodes and properties structure - -=== CONFIG_OF_DYNAMIC === -- Switch to RCU for tree updates and get rid of global spinlock -- Document node lifecycle for CONFIG_OF_DYNAMIC -- Always set ->full_name at of_attach_node() time -- pseries: Get rid of open-coded tree modification from arch/powerpc/platforms/pseries/dlpar.c diff --git a/Documentation/devicetree/writing-schema.md b/Documentation/devicetree/writing-schema.md new file mode 100644 index 000000000000..a3652d33a48f --- /dev/null +++ b/Documentation/devicetree/writing-schema.md @@ -0,0 +1,130 @@ +# Writing DeviceTree Bindings in json-schema + +Devicetree bindings are written using json-schema vocabulary. Schema files are +written in a JSON compatible subset of YAML. YAML is used instead of JSON as it +considered more human readable and has some advantages such as allowing +comments (Prefixed with '#'). + +## Schema Contents + +Each schema doc is a structured json-schema which is defined by a set of +top-level properties. Generally, there is one binding defined per file. The +top-level json-schema properties used are: + +- __$id__ - A json-schema unique identifier string. The string must be a valid +URI typically containing the binding's filename and path. For DT schema, it must +begin with "http://devicetree.org/schemas/". The URL is used in constructing +references to other files specified in schema "$ref" properties. A $ref values +with a leading '/' will have the hostname prepended. A $ref value a relative +path or filename only will be prepended with the hostname and path components +of the current schema file's '$id' value. A URL is used even for local files, +but there may not actually be files present at those locations. + +- __$schema__ - Indicates the meta-schema the schema file adheres to. + +- __title__ - A one line description on the contents of the binding schema. + +- __maintainers__ - A DT specific property. Contains a list of email address(es) +for maintainers of this binding. + +- __description__ - Optional. A multi-line text block containing any detailed +information about this binding. It should contain things such as what the block +or device does, standards the device conforms to, and links to datasheets for +more information. + +- __select__ - Optional. A json-schema used to match nodes for applying the +schema. By default without 'select', nodes are matched against their possible +compatible string values or node name. Most bindings should not need select. + +- __allOf__ - Optional. A list of other schemas to include. This is used to +include other schemas the binding conforms to. This may be schemas for a +particular class of devices such as I2C or SPI controllers. + +- __properties__ - A set of sub-schema defining all the DT properties for the +binding. The exact schema syntax depends on whether properties are known, +common properties (e.g. 'interrupts') or are binding/vendor specific properties. + + A property can also define a child DT node with child properties defined +under it. + + For more details on properties sections, see 'Property Schema' section. + +- __patternProperties__ - Optional. Similar to 'properties', but names are regex. + +- __required__ - A list of DT properties from the 'properties' section that +must always be present. + +- __examples__ - Optional. A list of one or more DTS hunks implementing the +binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead. + +Unless noted otherwise, all properties are required. + +## Property Schema + +The 'properties' section of the schema contains all the DT properties for a +binding. Each property contains a set of constraints using json-schema +vocabulary for that property. The properties schemas are what is used for +validation of DT files. + +For common properties, only additional constraints not covered by the common +binding schema need to be defined such as how many values are valid or what +possible values are valid. + +Vendor specific properties will typically need more detailed schema. With the +exception of boolean properties, they should have a reference to a type in +schemas/types.yaml. A "description" property is always required. + +The Devicetree schemas don't exactly match the YAML encoded DT data produced by +dtc. They are simplified to make them more compact and avoid a bunch of +boilerplate. The tools process the schema files to produce the final schema for +validation. There are currently 2 transformations the tools perform. + +The default for arrays in json-schema is they are variable sized and allow more +entries than explicitly defined. This can be restricted by defining 'minItems', +'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed +size is desired in most cases, so these properties are added based on the +number of entries in an 'items' list. + +The YAML Devicetree format also makes all string values an array and scalar +values a matrix (in order to define groupings) even when only a single value +is present. Single entries in schemas are fixed up to match this encoding. + +## Testing + +### Dependencies + +The DT schema project must be installed in order to validate the DT schema +binding documents and validate DTS files using the DT schema. The DT schema +project can be installed with pip: + +`pip3 install git+https://github.com/robherring/yaml-bindings.git@master` + +dtc must also be built with YAML output support enabled. This requires that +libyaml and its headers be installed on the host system. + +### Running checks + +The DT schema binding documents must be validated using the meta-schema (the +schema for the schema) to ensure they are both valid json-schema and valid +binding schema. All of the DT binding documents can be validated using the +`dt_binding_check` target: + +`make dt_binding_check` + +In order to perform validation of DT source files, use the `dtbs_check` target: + +`make dtbs_check` + +This will first run the `dt_binding_check` which generates the processed schema. + +It is also possible to run checks with a single schema file by setting the +'DT_SCHEMA_FILES' variable to a specific schema file. + +`make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml` + + +## json-schema Resources + +[JSON-Schema Specifications](http://json-schema.org/) + +[Using JSON Schema Book](http://usingjsonschema.com/) diff --git a/Documentation/driver-api/firmware/other_interfaces.rst b/Documentation/driver-api/firmware/other_interfaces.rst index 36c47b1e9824..a4ac54b5fd79 100644 --- a/Documentation/driver-api/firmware/other_interfaces.rst +++ b/Documentation/driver-api/firmware/other_interfaces.rst @@ -13,3 +13,33 @@ EDD Interfaces .. kernel-doc:: drivers/firmware/edd.c :internal: +Intel Stratix10 SoC Service Layer +--------------------------------- +Some features of the Intel Stratix10 SoC require a level of privilege +higher than the kernel is granted. Such secure features include +FPGA programming. In terms of the ARMv8 architecture, the kernel runs +at Exception Level 1 (EL1), access to the features requires +Exception Level 3 (EL3). + +The Intel Stratix10 SoC service layer provides an in kernel API for +drivers to request access to the secure features. The requests are queued +and processed one by one. ARM’s SMCCC is used to pass the execution +of the requests on to a secure monitor (EL3). + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_command_code + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_client_msg + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_command_reconfig_payload + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_cb_data + +.. kernel-doc:: include/linux/firmware/intel/stratix10-svc-client.h + :functions: stratix10_svc_client + +.. kernel-doc:: drivers/firmware/stratix10-svc.c + :export: diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst index a6c14ff0c54f..a92d8837b62b 100644 --- a/Documentation/driver-api/gpio/driver.rst +++ b/Documentation/driver-api/gpio/driver.rst @@ -434,7 +434,9 @@ try_module_get()). A GPIO driver can use the following functions instead to request and free descriptors without being pinned to the kernel forever:: struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, - const char *label) + u16 hwnum, + const char *label, + enum gpiod_flags flags) void gpiochip_free_own_desc(struct gpio_desc *desc) diff --git a/Documentation/driver-api/i3c/device-driver-api.rst b/Documentation/driver-api/i3c/device-driver-api.rst new file mode 100644 index 000000000000..85bc3381cd3e --- /dev/null +++ b/Documentation/driver-api/i3c/device-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +I3C device driver API +===================== + +.. kernel-doc:: include/linux/i3c/device.h + +.. kernel-doc:: drivers/i3c/device.c diff --git a/Documentation/driver-api/i3c/index.rst b/Documentation/driver-api/i3c/index.rst new file mode 100644 index 000000000000..783d6dad054b --- /dev/null +++ b/Documentation/driver-api/i3c/index.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +I3C subsystem +============= + +.. toctree:: + + protocol + device-driver-api + master-driver-api diff --git a/Documentation/driver-api/i3c/master-driver-api.rst b/Documentation/driver-api/i3c/master-driver-api.rst new file mode 100644 index 000000000000..332552b28358 --- /dev/null +++ b/Documentation/driver-api/i3c/master-driver-api.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +I3C master controller driver API +================================ + +.. kernel-doc:: drivers/i3c/master.c + +.. kernel-doc:: include/linux/i3c/master.h diff --git a/Documentation/driver-api/i3c/protocol.rst b/Documentation/driver-api/i3c/protocol.rst new file mode 100644 index 000000000000..dae3b6d32c6b --- /dev/null +++ b/Documentation/driver-api/i3c/protocol.rst @@ -0,0 +1,203 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +I3C protocol +============ + +Disclaimer +========== + +This chapter will focus on aspects that matter to software developers. For +everything hardware related (like how things are transmitted on the bus, how +collisions are prevented, ...) please have a look at the I3C specification. + +This document is just a brief introduction to the I3C protocol and the concepts +it brings to the table. If you need more information, please refer to the MIPI +I3C specification (can be downloaded here +http://resources.mipi.org/mipi-i3c-v1-download). + +Introduction +============ + +The I3C (pronounced 'eye-three-see') is a MIPI standardized protocol designed +to overcome I2C limitations (limited speed, external signals needed for +interrupts, no automatic detection of the devices connected to the bus, ...) +while remaining power-efficient. + +I3C Bus +======= + +An I3C bus is made of several I3C devices and possibly some I2C devices as +well, but let's focus on I3C devices for now. + +An I3C device on the I3C bus can have one of the following roles: + +* Master: the device is driving the bus. It's the one in charge of initiating + transactions or deciding who is allowed to talk on the bus (slave generated + events are possible in I3C, see below). +* Slave: the device acts as a slave, and is not able to send frames to another + slave on the bus. The device can still send events to the master on + its own initiative if the master allowed it. + +I3C is a multi-master protocol, so there might be several masters on a bus, +though only one device can act as a master at a given time. In order to gain +bus ownership, a master has to follow a specific procedure. + +Each device on the I3C bus has to be assigned a dynamic address to be able to +communicate. Until this is done, the device should only respond to a limited +set of commands. If it has a static address (also called legacy I2C address), +the device can reply to I2C transfers. + +In addition to these per-device addresses, the protocol defines a broadcast +address in order to address all devices on the bus. + +Once a dynamic address has been assigned to a device, this address will be used +for any direct communication with the device. Note that even after being +assigned a dynamic address, the device should still process broadcast messages. + +I3C Device discovery +==================== + +The I3C protocol defines a mechanism to automatically discover devices present +on the bus, their capabilities and the functionalities they provide. In this +regard I3C is closer to a discoverable bus like USB than it is to I2C or SPI. + +The discovery mechanism is called DAA (Dynamic Address Assignment), because it +not only discovers devices but also assigns them a dynamic address. + +During DAA, each I3C device reports 3 important things: + +* BCR: Bus Characteristic Register. This 8-bit register describes the device bus + related capabilities +* DCR: Device Characteristic Register. This 8-bit register describes the + functionalities provided by the device +* Provisional ID: A 48-bit unique identifier. On a given bus there should be no + Provisional ID collision, otherwise the discovery mechanism may fail. + +I3C slave events +================ + +The I3C protocol allows slaves to generate events on their own, and thus allows +them to take temporary control of the bus. + +This mechanism is called IBI for In Band Interrupts, and as stated in the name, +it allows devices to generate interrupts without requiring an external signal. + +During DAA, each device on the bus has been assigned an address, and this +address will serve as a priority identifier to determine who wins if 2 different +devices are generating an interrupt at the same moment on the bus (the lower the +dynamic address the higher the priority). + +Masters are allowed to inhibit interrupts if they want to. This inhibition +request can be broadcast (applies to all devices) or sent to a specific +device. + +I3C Hot-Join +============ + +The Hot-Join mechanism is similar to USB hotplug. This mechanism allows +slaves to join the bus after it has been initialized by the master. + +This covers the following use cases: + +* the device is not powered when the bus is probed +* the device is hotplugged on the bus through an extension board + +This mechanism is relying on slave events to inform the master that a new +device joined the bus and is waiting for a dynamic address. + +The master is then free to address the request as it wishes: ignore it or +assign a dynamic address to the slave. + +I3C transfer types +================== + +If you omit SMBus (which is just a standardization on how to access registers +exposed by I2C devices), I2C has only one transfer type. + +I3C defines 3 different classes of transfer in addition to I2C transfers which +are here for backward compatibility with I2C devices. + +I3C CCC commands +---------------- + +CCC (Common Command Code) commands are meant to be used for anything that is +related to bus management and all features that are common to a set of devices. + +CCC commands contain an 8-bit CCC ID describing the command that is executed. +The MSB of this ID specifies whether this is a broadcast command (bit7 = 0) or a +unicast one (bit7 = 1). + +The command ID can be followed by a payload. Depending on the command, this +payload is either sent by the master sending the command (write CCC command), +or sent by the slave receiving the command (read CCC command). Of course, read +accesses only apply to unicast commands. +Note that, when sending a CCC command to a specific device, the device address +is passed in the first byte of the payload. + +The payload length is not explicitly passed on the bus, and should be extracted +from the CCC ID. + +Note that vendors can use a dedicated range of CCC IDs for their own commands +(0x61-0x7f and 0xe0-0xef). + +I3C Private SDR transfers +------------------------- + +Private SDR (Single Data Rate) transfers should be used for anything that is +device specific and does not require high transfer speed. + +It is the equivalent of I2C transfers but in the I3C world. Each transfer is +passed the device address (dynamic address assigned during DAA), a payload +and a direction. + +The only difference with I2C is that the transfer is much faster (typical clock +frequency is 12.5MHz). + +I3C HDR commands +---------------- + +HDR commands should be used for anything that is device specific and requires +high transfer speed. + +The first thing attached to an HDR command is the HDR mode. There are currently +3 different modes defined by the I3C specification (refer to the specification +for more details): + +* HDR-DDR: Double Data Rate mode +* HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices +* HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices + +When sending an HDR command, the whole bus has to enter HDR mode, which is done +using a broadcast CCC command. +Once the bus has entered a specific HDR mode, the master sends the HDR command. +An HDR command is made of: + +* one 16-bits command word in big endian +* N 16-bits data words in big endian + +Those words may be wrapped with specific preambles/post-ambles which depend on +the chosen HDR mode and are detailed here (see the specification for more +details). + +The 16-bits command word is made of: + +* bit[15]: direction bit, read is 1, write is 0 +* bit[14:8]: command code. Identifies the command being executed, the amount of + data words and their meaning +* bit[7:1]: I3C address of the device this command is addressed to +* bit[0]: reserved/parity-bit + +Backward compatibility with I2C devices +======================================= + +The I3C protocol has been designed to be backward compatible with I2C devices. +This backward compatibility allows one to connect a mix of I2C and I3C devices +on the same bus, though, in order to be really efficient, I2C devices should +be equipped with 50 ns spike filters. + +I2C devices can't be discovered like I3C ones and have to be statically +declared. In order to let the master know what these devices are capable of +(both in terms of bus related limitations and functionalities), the software +has to provide some information, which is done through the LVR (Legacy I2C +Virtual Register). diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 909f991b4c0d..ab38ced66a44 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -33,6 +33,7 @@ available subsections can be seen below. pci/index spi i2c + i3c/index hsi edac scsi diff --git a/Documentation/driver-api/usb/index.rst b/Documentation/driver-api/usb/index.rst index 8fe995a1ec94..cfa8797ea614 100644 --- a/Documentation/driver-api/usb/index.rst +++ b/Documentation/driver-api/usb/index.rst @@ -19,6 +19,7 @@ Linux USB API dwc3 writing_musb_glue_layer typec + typec_bus usb3-debug-port .. only:: subproject and html diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst index 48ff58095f11..201163d8c13e 100644 --- a/Documentation/driver-api/usb/typec.rst +++ b/Documentation/driver-api/usb/typec.rst @@ -1,3 +1,4 @@ +.. _typec: USB Type-C connector class ========================== diff --git a/Documentation/driver-api/usb/typec_bus.rst b/Documentation/driver-api/usb/typec_bus.rst index d5eec1715b5b..f47a69bff498 100644 --- a/Documentation/driver-api/usb/typec_bus.rst +++ b/Documentation/driver-api/usb/typec_bus.rst @@ -13,10 +13,10 @@ every alternate mode, so every alternate mode will need a custom driver. USB Type-C bus allows binding a driver to the discovered partner alternate modes by using the SVID and the mode number. -USB Type-C Connector Class provides a device for every alternate mode a port -supports, and separate device for every alternate mode the partner supports. -The drivers for the alternate modes are bound to the partner alternate mode -devices, and the port alternate mode devices must be handled by the port +:ref:`USB Type-C Connector Class <typec>` provides a device for every alternate +mode a port supports, and separate device for every alternate mode the partner +supports. The drivers for the alternate modes are bound to the partner alternate +mode devices, and the port alternate mode devices must be handled by the port drivers. When a new partner alternate mode device is registered, it is linked to the @@ -46,7 +46,7 @@ enter any modes on their own. ``->vdm`` is the most important callback in the operation callbacks vector. It will be used to deliver all the SVID specific commands from the partner to the alternate mode driver, and vice versa in case of port drivers. The drivers send -the SVID specific commands to each other using :c:func:`typec_altmode_vmd()`. +the SVID specific commands to each other using :c:func:`typec_altmode_vdm()`. If the communication with the partner using the SVID specific commands results in need to reconfigure the pins on the connector, the alternate mode driver @@ -67,15 +67,15 @@ Type-C Specification, and also put the connector back to ``TYPEC_STATE_USB`` after the mode has been exited. An example of working definitions for SVID specific pin configurations would -look like this: +look like this:: -enum { - ALTMODEX_CONF_A = TYPEC_STATE_MODAL, - ALTMODEX_CONF_B, - ... -}; + enum { + ALTMODEX_CONF_A = TYPEC_STATE_MODAL, + ALTMODEX_CONF_B, + ... + }; -Helper macro ``TYPEC_MODAL_STATE()`` can also be used: +Helper macro ``TYPEC_MODAL_STATE()`` can also be used:: #define ALTMODEX_CONF_A = TYPEC_MODAL_STATE(0); #define ALTMODEX_CONF_B = TYPEC_MODAL_STATE(1); diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 43681ca0837f..52a752300e94 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -254,8 +254,8 @@ GPIO devm_gpiod_get_index_optional() devm_gpiod_get_optional() devm_gpiod_put() + devm_gpiod_unhinge() devm_gpiochip_add_data() - devm_gpiochip_remove() devm_gpio_request() devm_gpio_request_one() devm_gpio_free() diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 27cbd63abfd2..60111395f932 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -29,5 +29,5 @@ | um: | TODO | | unicore32: | TODO | | x86: | ok | - | xtensa: | TODO | + | xtensa: | ok | ----------------------- diff --git a/Documentation/features/io/sg-chain/arch-support.txt b/Documentation/features/io/sg-chain/arch-support.txt deleted file mode 100644 index 6554f0372c3f..000000000000 --- a/Documentation/features/io/sg-chain/arch-support.txt +++ /dev/null @@ -1,33 +0,0 @@ -# -# Feature name: sg-chain -# Kconfig: ARCH_HAS_SG_CHAIN -# description: arch supports chained scatter-gather lists -# - ----------------------- - | arch |status| - ----------------------- - | alpha: | TODO | - | arc: | ok | - | arm: | ok | - | arm64: | ok | - | c6x: | TODO | - | h8300: | TODO | - | hexagon: | TODO | - | ia64: | ok | - | m68k: | TODO | - | microblaze: | TODO | - | mips: | TODO | - | nds32: | TODO | - | nios2: | TODO | - | openrisc: | TODO | - | parisc: | TODO | - | powerpc: | ok | - | riscv: | TODO | - | s390: | ok | - | sh: | TODO | - | sparc: | ok | - | um: | TODO | - | unicore32: | TODO | - | x86: | ok | - | xtensa: | TODO | - ----------------------- diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 8527601a3739..326e4797bc65 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -16,7 +16,7 @@ | ia64: | TODO | | m68k: | TODO | | microblaze: | TODO | - | mips: | TODO | + | mips: | ok | | nds32: | TODO | | nios2: | TODO | | openrisc: | TODO | diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 12a5e6e693b6..b24fd9bccc99 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -182,6 +182,7 @@ read the file /proc/PID/status: VmSwap: 0 kB HugetlbPages: 0 kB CoreDumping: 0 + THP_enabled: 1 Threads: 1 SigQ: 0/28578 SigPnd: 0000000000000000 @@ -256,6 +257,8 @@ Table 1-2: Contents of the status files (as of 4.8) HugetlbPages size of hugetlb memory portions CoreDumping process's memory is currently being dumped (killing the process may lead to a corrupted core) + THP_enabled process is allowed to use THP (returns 0 when + PR_SET_THP_DISABLE is set on the process Threads number of threads SigQ number of signals queued/max. number for queue SigPnd bitmap of pending signals for the thread @@ -425,6 +428,7 @@ SwapPss: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Locked: 0 kB +THPeligible: 0 VmFlags: rd ex mr mw me dw the first of these lines shows the same information as is displayed for the @@ -462,6 +466,8 @@ replaced by copy-on-write) part of the underlying shmem object out on swap. "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this does not take into account swapped out page of underlying shmem objects. "Locked" indicates whether the mapping is locked in memory or not. +"THPeligible" indicates whether the mapping is eligible for THP pages - 1 if +true, 0 otherwise. "VmFlags" field deserves a separate description. This member represents the kernel flags associated with the particular virtual memory area in two letter encoded @@ -496,7 +502,9 @@ manner. The codes are the following: Note that there is no guarantee that every flag and associated mnemonic will be present in all further kernel releases. Things get changed, the flags may -be vanished or the reverse -- new added. +be vanished or the reverse -- new added. Interpretation of their meaning +might change in future as well. So each consumer of these flags has to +follow each specific kernel version for the exact semantic. This file is only present if the CONFIG_MMU kernel configuration option is enabled. diff --git a/Documentation/gpu/amdgpu-dc.rst b/Documentation/gpu/amdgpu-dc.rst new file mode 100644 index 000000000000..cc89b0fc11df --- /dev/null +++ b/Documentation/gpu/amdgpu-dc.rst @@ -0,0 +1,68 @@ +=================================== +drm/amd/display - Display Core (DC) +=================================== + +*placeholder - general description of supported platforms, what dc is, etc.* + +Because it is partially shared with other operating systems, the Display Core +Driver is divided in two pieces. + +1. **Display Core (DC)** contains the OS-agnostic components. Things like + hardware programming and resource management are handled here. +2. **Display Manager (DM)** contains the OS-dependent components. Hooks to the + amdgpu base driver and DRM are implemented here. + +It doesn't help that the entire package is frequently referred to as DC. But +with the context in mind, it should be clear. + +When CONFIG_DRM_AMD_DC is enabled, DC will be initialized by default for +supported ASICs. To force disable, set `amdgpu.dc=0` on kernel command line. +Likewise, to force enable on unsupported ASICs, set `amdgpu.dc=1`. + +To determine if DC is loaded, search dmesg for the following entry: + +``Display Core initialized with <version number here>`` + +AMDgpu Display Manager +====================== + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h + :internal: + +Lifecycle +--------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: DM Lifecycle + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: dm_hw_init dm_hw_fini + +Interrupts +---------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c + :internal: + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: register_hpd_handlers dm_crtc_high_irq dm_pflip_high_irq + +Atomic Implementation +--------------------- + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :doc: atomic + +.. kernel-doc:: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c + :functions: amdgpu_dm_atomic_check amdgpu_dm_atomic_commit_tail + +Display Core +============ + +**WIP** diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst index 7d2d3875ff1a..7c1672118a73 100644 --- a/Documentation/gpu/drivers.rst +++ b/Documentation/gpu/drivers.rst @@ -5,6 +5,7 @@ GPU Driver Documentation .. toctree:: amdgpu + amdgpu-dc i915 meson pl111 diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index f9cfcdcdf024..b422eb8edf16 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -59,19 +59,28 @@ Implementing Asynchronous Atomic Commit .. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c :doc: implementing nonblocking commit +Helper Functions Reference +-------------------------- + +.. kernel-doc:: include/drm/drm_atomic_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c + :export: + Atomic State Reset and Initialization ------------------------------------- -.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c :doc: atomic state reset and initialization -Helper Functions Reference --------------------------- +Atomic State Helper Reference +----------------------------- -.. kernel-doc:: include/drm/drm_atomic_helper.h +.. kernel-doc:: include/drm/drm_atomic_state_helper.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c +.. kernel-doc:: drivers/gpu/drm/drm_atomic_state_helper.c :export: Simple KMS Helper Reference @@ -223,6 +232,18 @@ MIPI DSI Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c :export: +Display Stream Compression Helper Functions Reference +===================================================== + +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c + :doc: dsc helpers + +.. kernel-doc:: include/drm/drm_dsc.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_dsc.c + :export: + Output Probing Helper Functions Reference ========================================= diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 4b1501b4835b..75c882e09fee 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -554,6 +554,18 @@ Plane Composition Properties .. kernel-doc:: drivers/gpu/drm/drm_blend.c :export: +FB_DAMAGE_CLIPS +~~~~~~~~~~~~~~~ + +.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c + :export: + +.. kernel-doc:: include/drm/drm_damage_helper.h + :internal: + Color Management Properties --------------------------- @@ -575,6 +587,13 @@ Explicit Fencing Properties .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c :doc: explicit fencing properties + +Variable Refresh Properties +--------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: Variable refresh properties + Existing KMS Properties ----------------------- diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst index e725e8449e72..54a696d961a7 100644 --- a/Documentation/gpu/drm-mm.rst +++ b/Documentation/gpu/drm-mm.rst @@ -72,16 +72,13 @@ object TTM to provide a pool for buffer object allocation by clients and the kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct ttm_bo_global). Again, driver-specific init and release functions may -be provided, likely eventually calling ttm_bo_global_init() and -ttm_bo_global_release(), respectively. Also, like the previous +be provided, likely eventually calling ttm_bo_global_ref_init() and +ttm_bo_global_ref_release(), respectively. Also, like the previous object, ttm_global_item_ref() is used to create an initial reference count for the TTM, which will call your initialization function. See the radeon_ttm.c file for an example of usage. -.. kernel-doc:: drivers/gpu/drm/drm_global.c - :export: - The Graphics Execution Manager (GEM) ==================================== diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst index a2214cc1f821..4b4bf2c5eac5 100644 --- a/Documentation/gpu/drm-uapi.rst +++ b/Documentation/gpu/drm-uapi.rst @@ -197,6 +197,9 @@ EPERM/EACCESS: difference between EACCESS and EPERM. ENODEV: + The device is not (yet) present or fully initialized. + +EOPNOTSUPP: Feature (like PRIME, modesetting, GEM) is not supported by the driver. ENXIO: diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 77c2b3c25565..14191b64446d 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -28,22 +28,16 @@ them, but also all the virtual ones used by KVM, so everyone qualifies). Contact: Daniel Vetter, Thierry Reding, respective driver maintainers -Switch from reference/unreference to get/put --------------------------------------------- - -For some reason DRM core uses ``reference``/``unreference`` suffixes for -refcounting functions, but kernel uses ``get``/``put`` (e.g. -``kref_get``/``put()``). It would be good to switch over for consistency, and -it's shorter. Needs to be done in 3 steps for each pair of functions: -* Create new ``get``/``put`` functions, define the old names as compatibility - wrappers -* Switch over each file/driver using a cocci-generated spatch. -* Once all users of the old names are gone, remove them. +Remove custom dumb_map_offset implementations +--------------------------------------------- -This way drivers/patches in the progress of getting merged won't break. +All GEM based drivers should be using drm_gem_create_mmap_offset() instead. +Audit each individual driver, make sure it'll work with the generic +implementation (there's lots of outdated locking leftovers in various +implementations), and then remove it. -Contact: Daniel Vetter +Contact: Daniel Vetter, respective driver maintainers Convert existing KMS drivers to atomic modesetting -------------------------------------------------- @@ -234,6 +228,34 @@ efficient. Contact: Daniel Vetter +Defaults for .gem_prime_import and export +----------------------------------------- + +Most drivers don't need to set drm_driver->gem_prime_import and +->gem_prime_export now that drm_gem_prime_import() and drm_gem_prime_export() +are the default. + +struct drm_gem_object_funcs +--------------------------- + +GEM objects can now have a function table instead of having the callbacks on the +DRM driver struct. This is now the preferred way and drivers can be moved over. + +Use DRM_MODESET_LOCK_ALL_* helpers instead of boilerplate +--------------------------------------------------------- + +For cases where drivers are attempting to grab the modeset locks with a local +acquire context. Replace the boilerplate code surrounding +drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN() and +DRM_MODESET_LOCK_ALL_END() instead. + +This should also be done for all places where drm_modest_lock_all() is still +used. + +As a reference, take a look at the conversions already completed in drm core. + +Contact: Sean Paul, respective driver maintainers + Core refactorings ================= @@ -339,6 +361,16 @@ Some of these date from the very introduction of KMS in 2008 ... leftovers from older (never merged into upstream) KMS designs where modes where set using their ID, including support to add/remove modes. +- Make ->funcs and ->helper_private vtables optional. There's a bunch of empty + function tables in drivers, but before we can remove them we need to make sure + that all the users in helpers and drivers do correctly check for a NULL + vtable. + +- Cleanup up the various ->destroy callbacks. A lot of them just wrapt the + drm_*_cleanup implementations and can be removed. Some tack a kfree() at the + end, for which we could add drm_*_cleanup_kfree(). And then there's the (for + historical reasons) misnamed drm_primary_helper_destroy() function. + Better Testing ============== diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 0a6ea6216e41..7dfc349a4508 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -10,8 +10,8 @@ TODO ==== -CRC API -------- +CRC API Improvements +-------------------- - Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` @@ -22,3 +22,100 @@ CRC API - Add igt test to check extreme alpha values i.e. fully opaque and fully transparent (intermediate values are affected by hw-specific rounding modes). + +Vblank issues +------------- + +Some IGT test cases are failing. Need to analyze why and fix the issues: + +- plain-flip-fb-recreate +- plain-flip-ts-check +- flip-vs-blocking-wf-vblank +- plain-flip-fb-recreate-interruptible +- flip-vs-wf_vblank-interruptible + +Runtime Configuration +--------------------- + +We want to be able to reconfigure vkms instance without having to reload the +module. Use/Test-cases: + +- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of + compositors). + +- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of + them first). + +- Change output configuration: Plug/unplug screens, change EDID, allow changing + the refresh rate. + +The currently proposed solution is to expose vkms configuration through +configfs. All existing module options should be supported through configfs too. + +Add Plane Features +------------------ + +There's lots of plane features we could add support for: + +- Real overlay planes, not just cursor. + +- Full alpha blending on all planes. + +- Rotation, scaling. + +- Additional buffer formats, especially YUV formats for video like NV12. + Low/high bpp RGB formats would also be interesting. + +- Async updates (currently only possible on cursor plane using the legacy cursor + api). + +For all of these, we also want to review the igt test coverage and make sure all +relevant igt testcases work on vkms. + +Writeback support +----------------- + +Currently vkms only computes a CRC for each frame. Once we have additional plane +features, we could write back the entire composited frame, and expose it as: + +- Writeback connector. This is useful for testing compositors if you don't have + hardware with writeback support. + +- As a v4l device. This is useful for debugging compositors on special vkms + configurations, so that developers see what's really going on. + +Prime Buffer Sharing +-------------------- + +We already have vgem, which is a gem driver for testing rendering, similar to +how vkms is for testing the modeset side. Adding buffer sharing support to vkms +allows us to test them together, to test synchronization and lots of other +features. Also, this allows compositors to test whether they work correctly on +SoC chips, where the display and rendering is very often split between 2 +drivers. + +Output Features +--------------- + +- Variable refresh rate/freesync support. This probably needs prime buffer + sharing support, so that we can use vgem fences to simulate rendering in + testing. Also needs support to specify the EDID. + +- Add support for link status, so that compositors can validate their runtime + fallbacks when e.g. a Display Port link goes bad. + +- All the hotplug handling describe under "Runtime Configuration". + +Atomic Check using eBPF +----------------------- + +Atomic drivers have lots of restrictions which are not exposed to userspace in +any explicit form through e.g. possible property values. Userspace can only +inquiry about these limits through the atomic IOCTL, possibly using the +TEST_ONLY flag. Trying to add configurable code for all these limits, to allow +compositors to be tested against them, would be rather futile exercise. Instead +we could add support for eBPF to validate any kind of atomic state, and +implement a library of different restrictions. + +This needs a bunch of features (plane compositing, multiple outputs, ...) +enabled already to make sense. diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 39033538eb03..5e277b0d91ce 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -58,6 +58,9 @@ The ADM1075, unlike many other PMBus devices, does not support internal voltage or current scaling. Reported voltages, currents, and power are raw measurements, and will typically have to be scaled. +The shunt value in micro-ohms can be set via device tree at compile-time. Please +refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings +if the device tree is used. Platform data support --------------------- diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475 index 09d73a10644c..01b46b290532 100644 --- a/Documentation/hwmon/adt7475 +++ b/Documentation/hwmon/adt7475 @@ -79,6 +79,18 @@ ADT7490: * 2 GPIO pins (not implemented) * system acoustics optimizations (not implemented) +Sysfs Mapping +------------- + + ADT7490 ADT7476 ADT7475 ADT7473 + ------- ------- ------- ------- +in0 2.5VIN (22) 2.5VIN (22) - - +in1 VCCP (23) VCCP (23) VCCP (14) VCCP (14) +in2 VCC (4) VCC (4) VCC (4) VCC (3) +in3 5VIN (20) 5VIN (20) +in4 12VIN (21) 12VIN (21) +in5 VTT (8) + Special Features ---------------- diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.txt index eb7a78aebb38..8bdefb41be30 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.txt @@ -299,17 +299,25 @@ functions is used. The header file linux/hwmon-sysfs.h provides a number of useful macros to declare and use hardware monitoring sysfs attributes. -In many cases, you can use the exsting define DEVICE_ATTR to declare such -attributes. This is feasible if an attribute has no additional context. However, -in many cases there will be additional information such as a sensor index which -will need to be passed to the sysfs attribute handling function. +In many cases, you can use the exsting define DEVICE_ATTR or its variants +DEVICE_ATTR_{RW,RO,WO} to declare such attributes. This is feasible if an +attribute has no additional context. However, in many cases there will be +additional information such as a sensor index which will need to be passed +to the sysfs attribute handling function. SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 can be used to define attributes which need such additional context information. SENSOR_DEVICE_ATTR requires one additional argument, SENSOR_DEVICE_ATTR_2 requires two. -SENSOR_DEVICE_ATTR defines a struct sensor_device_attribute variable. -This structure has the following fields. +Simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 are available +and should be used if standard attribute permissions and function names are +feasible. Standard permissions are 0644 for SENSOR_DEVICE_ATTR[_2]_RW, +0444 for SENSOR_DEVICE_ATTR[_2]_RO, and 0200 for SENSOR_DEVICE_ATTR[_2]_WO. +Standard functions, similar to DEVICE_ATTR_{RW,RO,WO}, have _show and _store +appended to the provided function name. + +SENSOR_DEVICE_ATTR and its variants define a struct sensor_device_attribute +variable. This structure has the following fields. struct sensor_device_attribute { struct device_attribute dev_attr; @@ -320,8 +328,8 @@ You can use to_sensor_dev_attr to get the pointer to this structure from the attribute read or write function. Its parameter is the device to which the attribute is attached. -SENSOR_DEVICE_ATTR_2 defines a struct sensor_device_attribute_2 variable, -which is defined as follows. +SENSOR_DEVICE_ATTR_2 and its variants define a struct sensor_device_attribute_2 +variable, which is defined as follows. struct sensor_device_attribute_2 { struct device_attribute dev_attr; diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index b8df81f6d6bc..0f36c021192d 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -62,3 +62,18 @@ bus and shunt voltage conversion times multiplied by the averaging rate. We don't touch the conversion times and only modify the number of averages. The lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. The actual programmed interval may vary from the desired value. + +General sysfs entries +------------- + +in0_input Shunt voltage(mV) channel +in1_input Bus voltage(mV) channel +curr1_input Current(mA) measurement channel +power1_input Power(uW) measurement channel +shunt_resistor Shunt resistance(uOhm) channel + +Sysfs entries for ina226, ina230 and ina231 only +------------- + +update_interval data conversion time; affects number of samples used + to average results for shunt and bus voltages. diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 2f1120f88c16..010583608f12 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -42,6 +42,11 @@ Supported chips: Addresses scanned: none Datasheet: Publicly available at the ST website http://www.st.com/internet/analog/product/121769.jsp + * ST Microelectronics STLM75 + Prefix: 'stlm75' + Addresses scanned: none + Datasheet: Publicly available at the ST website + https://www.st.com/resource/en/datasheet/stlm75.pdf * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275 Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275' Addresses scanned: none diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ new file mode 100644 index 000000000000..e787596e03fe --- /dev/null +++ b/Documentation/hwmon/occ @@ -0,0 +1,112 @@ +Kernel driver occ-hwmon +======================= + +Supported chips: + * POWER8 + * POWER9 + +Author: Eddie James <eajames@linux.ibm.com> + +Description +----------- + +This driver supports hardware monitoring for the On-Chip Controller (OCC) +embedded on POWER processors. The OCC is a device that collects and aggregates +sensor data from the processor and the system. The OCC can provide the raw +sensor data as well as perform thermal and power management on the system. + +The P8 version of this driver is a client driver of I2C. It may be probed +manually if an "ibm,p8-occ-hwmon" compatible device is found under the +appropriate I2C bus node in the device-tree. + +The P9 version of this driver is a client driver of the FSI-based OCC driver. +It will be probed automatically by the FSI-based OCC driver. + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read-only unless +specified. + +The OCC sensor ID is an integer that represents the unique identifier of the +sensor with respect to the OCC. For example, a temperature sensor for the third +DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable +to the device driver, which must therefore export the sensor ID as-is. + +Some entries are only present with certain OCC sensor versions or only on +certain OCCs in the system. The version number is not exported to the user +but can be inferred. + +temp[1-n]_label OCC sensor ID. +[with temperature sensor version 1] + temp[1-n]_input Measured temperature of the component in millidegrees + Celsius. +[with temperature sensor version >= 2] + temp[1-n]_type The FRU (Field Replaceable Unit) type + (represented by an integer) for the component + that this sensor measures. + temp[1-n]_fault Temperature sensor fault boolean; 1 to indicate + that a fault is present or 0 to indicate that + no fault is present. + [with type == 3 (FRU type is VRM)] + temp[1-n]_alarm VRM temperature alarm boolean; 1 to indicate + alarm, 0 to indicate no alarm + [else] + temp[1-n]_input Measured temperature of the component in + millidegrees Celsius. + +freq[1-n]_label OCC sensor ID. +freq[1-n]_input Measured frequency of the component in MHz. + +power[1-n]_input Latest measured power reading of the component in + microwatts. +power[1-n]_average Average power of the component in microwatts. +power[1-n]_average_interval The amount of time over which the power average + was taken in microseconds. +[with power sensor version < 2] + power[1-n]_label OCC sensor ID. +[with power sensor version >= 2] + power[1-n]_label OCC sensor ID + function ID + channel in the form + of a string, delimited by underscores, i.e. "0_15_1". + Both the function ID and channel are integers that + further identify the power sensor. +[with power sensor version 0xa0] + power[1-n]_label OCC sensor ID + sensor type in the form of a string, + delimited by an underscore, i.e. "0_system". Sensor + type will be one of "system", "proc", "vdd" or "vdn". + For this sensor version, OCC sensor ID will be the same + for all power sensors. +[present only on "master" OCC; represents the whole system power; only one of + this type of power sensor will be present] + power[1-n]_label "system" + power[1-n]_input Latest system output power in microwatts. + power[1-n]_cap Current system power cap in microwatts. + power[1-n]_cap_not_redundant System power cap in microwatts when + there is not redundant power. + power[1-n]_cap_max Maximum power cap that the OCC can enforce in + microwatts. + power[1-n]_cap_min Minimum power cap that the OCC can enforce in + microwatts. + power[1-n]_cap_user The power cap set by the user, in microwatts. + This attribute will return 0 if no user power + cap has been set. This attribute is read-write, + but writing any precision below watts will be + ignored, i.e. requesting a power cap of + 500900000 microwatts will result in a power cap + request of 500 watts. + [with caps sensor version > 1] + power[1-n]_cap_user_source Indicates how the user power cap was + set. This is an integer that maps to + system or firmware components that can + set the user power cap. + +The following "extn" sensors are exported as a way for the OCC to provide data +that doesn't fit anywhere else. The meaning of these sensors is entirely +dependent on their data, and cannot be statically defined. + +extn[1-n]_label ASCII ID or OCC sensor ID. +extn[1-n]_flags This is one byte hexadecimal value. Bit 7 indicates the + type of the label attribute; 1 for sensor ID, 0 for + ASCII ID. Other bits are reserved. +extn[1-n]_input 6 bytes of hexadecimal data, with a meaning defined by + the sensor ID. diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index cef220c176a4..a8c0873beb95 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -190,16 +190,7 @@ A few EV_REL codes have special meanings: * REL_WHEEL, REL_HWHEEL: - These codes are used for vertical and horizontal scroll wheels, - respectively. The value is the number of "notches" moved on the wheel, the - physical size of which varies by device. For high-resolution wheels (which - report multiple events for each notch of movement, or do not have notches) - this may be an approximation based on the high-resolution scroll events. - -* REL_WHEEL_HI_RES: - - - If a vertical scroll wheel supports high-resolution scrolling, this code - will be emitted in addition to REL_WHEEL. The value is the (approximate) - distance travelled by the user's finger, in microns. + respectively. EV_ABS ------ diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index fc9485d79061..ff4c25098119 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -279,10 +279,14 @@ such a method has a form like:: One important point cannot be overstated: every kobject must have a release() method, and the kobject must persist (in a consistent state) until that method is called. If these constraints are not met, the code is -flawed. Note that the kernel will warn you if you forget to provide a +flawed. Note that the kernel will warn you if you forget to provide a release() method. Do not try to get rid of this warning by providing an -"empty" release function; you will be mocked mercilessly by the kobject -maintainer if you attempt this. +"empty" release function. + +If all your cleanup function needs to do is call kfree(), then you must +create a wrapper function which uses container_of() to upcast to the correct +type (as shown in the example above) and then calls kfree() on the overall +structure. Note, the name of the kobject is available in the release function, but it must NOT be changed within this callback. Otherwise there will be a memory diff --git a/Documentation/media/.gitignore b/Documentation/media/.gitignore index 08b21de3ef94..53adc029061f 100644 --- a/Documentation/media/.gitignore +++ b/Documentation/media/.gitignore @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + *.pdf # Files generated from *.dot uapi/v4l/pipeline.svg diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile index 36166952d555..d75d70f191bc 100644 --- a/Documentation/media/Makefile +++ b/Documentation/media/Makefile @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Rules to convert a .h file to inline RST documentation SRC_DIR=$(srctree)/Documentation/media diff --git a/Documentation/media/audio.h.rst.exceptions b/Documentation/media/audio.h.rst.exceptions index 940458774cf6..cf6620477f73 100644 --- a/Documentation/media/audio.h.rst.exceptions +++ b/Documentation/media/audio.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBAUDIO_H_ diff --git a/Documentation/media/ca.h.rst.exceptions b/Documentation/media/ca.h.rst.exceptions index 553559cc6ad7..f6828238eb48 100644 --- a/Documentation/media/ca.h.rst.exceptions +++ b/Documentation/media/ca.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBCA_H_ diff --git a/Documentation/media/cec-drivers/index.rst b/Documentation/media/cec-drivers/index.rst index 7ef204823422..2b7fcaa4311b 100644 --- a/Documentation/media/cec-drivers/index.rst +++ b/Documentation/media/cec-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/cec-drivers/pulse8-cec.rst b/Documentation/media/cec-drivers/pulse8-cec.rst index 99551c6a9bc5..356d08b519f3 100644 --- a/Documentation/media/cec-drivers/pulse8-cec.rst +++ b/Documentation/media/cec-drivers/pulse8-cec.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Pulse-Eight CEC Adapter driver ============================== diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions index d9fd092de6f8..014816d04b9e 100644 --- a/Documentation/media/cec.h.rst.exceptions +++ b/Documentation/media/cec.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _CEC_UAPI_H diff --git a/Documentation/media/conf.py b/Documentation/media/conf.py index bef927bc4659..1f194fcd2cae 100644 --- a/Documentation/media/conf.py +++ b/Documentation/media/conf.py @@ -1,5 +1,7 @@ # -*- coding: utf-8; mode: python -*- +# SPDX-License-Identifier: GPL-2.0 + project = 'Linux Media Subsystem Documentation' tags.add("subproject") diff --git a/Documentation/media/conf_nitpick.py b/Documentation/media/conf_nitpick.py index 480d548af670..d0c50d75f518 100644 --- a/Documentation/media/conf_nitpick.py +++ b/Documentation/media/conf_nitpick.py @@ -1,5 +1,7 @@ # -*- coding: utf-8; mode: python -*- +# SPDX-License-Identifier: GPL-2.0 + project = 'Linux Media Subsystem Documentation' # It is possible to run Sphinx in nickpick mode with: diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions index a8c4239ed95b..afc14d384b83 100644 --- a/Documentation/media/dmx.h.rst.exceptions +++ b/Documentation/media/dmx.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI_DVBDMX_H_ diff --git a/Documentation/media/dvb-drivers/avermedia.rst b/Documentation/media/dvb-drivers/avermedia.rst index 49cd9c935307..14f437ca38d3 100644 --- a/Documentation/media/dvb-drivers/avermedia.rst +++ b/Documentation/media/dvb-drivers/avermedia.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + HOWTO: Get An Avermedia DVB-T working under Linux ------------------------------------------------- diff --git a/Documentation/media/dvb-drivers/bt8xx.rst b/Documentation/media/dvb-drivers/bt8xx.rst index e3e387bdf498..7936cd96fc8f 100644 --- a/Documentation/media/dvb-drivers/bt8xx.rst +++ b/Documentation/media/dvb-drivers/bt8xx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + How to get the bt8xx cards working ================================== diff --git a/Documentation/media/dvb-drivers/cards.rst b/Documentation/media/dvb-drivers/cards.rst index 177cbeb2b561..e2e30a56b450 100644 --- a/Documentation/media/dvb-drivers/cards.rst +++ b/Documentation/media/dvb-drivers/cards.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Hardware supported by the linuxtv.org DVB drivers ================================================= diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst index 87f3748c49b9..35f33f1f9e2a 100644 --- a/Documentation/media/dvb-drivers/ci.rst +++ b/Documentation/media/dvb-drivers/ci.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Conditional Access Interface (CI API) ================================================ diff --git a/Documentation/media/dvb-drivers/contributors.rst b/Documentation/media/dvb-drivers/contributors.rst index 5949753008ae..f23b6e6faf46 100644 --- a/Documentation/media/dvb-drivers/contributors.rst +++ b/Documentation/media/dvb-drivers/contributors.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Contributors ============ diff --git a/Documentation/media/dvb-drivers/dvb-usb.rst b/Documentation/media/dvb-drivers/dvb-usb.rst index eec99cd07a30..6679191819aa 100644 --- a/Documentation/media/dvb-drivers/dvb-usb.rst +++ b/Documentation/media/dvb-drivers/dvb-usb.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Idea behind the dvb-usb-framework ================================= diff --git a/Documentation/media/dvb-drivers/faq.rst b/Documentation/media/dvb-drivers/faq.rst index a8593d3792fa..52f153d18278 100644 --- a/Documentation/media/dvb-drivers/faq.rst +++ b/Documentation/media/dvb-drivers/faq.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + FAQ === diff --git a/Documentation/media/dvb-drivers/frontends.rst b/Documentation/media/dvb-drivers/frontends.rst index 1f5f57989196..7b8336ece681 100644 --- a/Documentation/media/dvb-drivers/frontends.rst +++ b/Documentation/media/dvb-drivers/frontends.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + **************** Frontend drivers **************** diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst index 314e127d82e3..9d3fce544f85 100644 --- a/Documentation/media/dvb-drivers/index.rst +++ b/Documentation/media/dvb-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/dvb-drivers/intro.rst b/Documentation/media/dvb-drivers/intro.rst index d6eeb2708b9b..4e361bcc3ad4 100644 --- a/Documentation/media/dvb-drivers/intro.rst +++ b/Documentation/media/dvb-drivers/intro.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Introduction ============ diff --git a/Documentation/media/dvb-drivers/lmedm04.rst b/Documentation/media/dvb-drivers/lmedm04.rst index e8913d4481a0..a6ee33413748 100644 --- a/Documentation/media/dvb-drivers/lmedm04.rst +++ b/Documentation/media/dvb-drivers/lmedm04.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Firmware files for lmedm04 cards ================================ diff --git a/Documentation/media/dvb-drivers/opera-firmware.rst b/Documentation/media/dvb-drivers/opera-firmware.rst index 41236b43c124..fab3581551de 100644 --- a/Documentation/media/dvb-drivers/opera-firmware.rst +++ b/Documentation/media/dvb-drivers/opera-firmware.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Opera firmware ============== diff --git a/Documentation/media/dvb-drivers/technisat.rst b/Documentation/media/dvb-drivers/technisat.rst index f80f4ecc1560..9eaa12366bbf 100644 --- a/Documentation/media/dvb-drivers/technisat.rst +++ b/Documentation/media/dvb-drivers/technisat.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + How to set up the Technisat/B2C2 Flexcop devices ================================================ diff --git a/Documentation/media/dvb-drivers/ttusb-dec.rst b/Documentation/media/dvb-drivers/ttusb-dec.rst index 84fc2199dc29..516bbab8a872 100644 --- a/Documentation/media/dvb-drivers/ttusb-dec.rst +++ b/Documentation/media/dvb-drivers/ttusb-dec.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + TechnoTrend/Hauppauge DEC USB Driver ==================================== diff --git a/Documentation/media/dvb-drivers/udev.rst b/Documentation/media/dvb-drivers/udev.rst index 7d7d5d82108a..ca6c9c226902 100644 --- a/Documentation/media/dvb-drivers/udev.rst +++ b/Documentation/media/dvb-drivers/udev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + UDEV rules for DVB ================== diff --git a/Documentation/media/frontend.h.rst.exceptions b/Documentation/media/frontend.h.rst.exceptions index f7c4df620a52..6283702c08c8 100644 --- a/Documentation/media/frontend.h.rst.exceptions +++ b/Documentation/media/frontend.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBFRONTEND_H_ diff --git a/Documentation/media/index.rst b/Documentation/media/index.rst index 1cf5316c8ff8..0a222fc1d7ca 100644 --- a/Documentation/media/index.rst +++ b/Documentation/media/index.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Linux Media Subsystem Documentation =================================== diff --git a/Documentation/media/intro.rst b/Documentation/media/intro.rst index 9ce2e23a0236..4a6bd665b884 100644 --- a/Documentation/media/intro.rst +++ b/Documentation/media/intro.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 ============ Introduction diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index bca1d9d1d223..3ce26b7c2b2b 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + CEC Kernel Support ================== diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst index 0560100efca2..a7e75e2eba85 100644 --- a/Documentation/media/kapi/csi2.rst +++ b/Documentation/media/kapi/csi2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + MIPI CSI-2 ========== diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst index fded096b937c..8a09862b428b 100644 --- a/Documentation/media/kapi/dtv-ca.rst +++ b/Documentation/media/kapi/dtv-ca.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Conditional Access kABI ---------------------------------- diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst index 7a9574f03190..f8b2c4dc8170 100644 --- a/Documentation/media/kapi/dtv-common.rst +++ b/Documentation/media/kapi/dtv-common.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Common functions --------------------------- diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst index bca743dc6b43..17454a2cf6b0 100644 --- a/Documentation/media/kapi/dtv-core.rst +++ b/Documentation/media/kapi/dtv-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV (DVB) devices ------------------------ diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst index 24857133e4e8..c0ae5dec5328 100644 --- a/Documentation/media/kapi/dtv-demux.rst +++ b/Documentation/media/kapi/dtv-demux.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Demux kABI --------------------- diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst index 472650cdb100..8ea64742c7ba 100644 --- a/Documentation/media/kapi/dtv-frontend.rst +++ b/Documentation/media/kapi/dtv-frontend.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Frontend kABI ------------------------ diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst index 158c7cbd7600..deb6bffe96bb 100644 --- a/Documentation/media/kapi/dtv-net.rst +++ b/Documentation/media/kapi/dtv-net.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Digital TV Network kABI ----------------------- diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst index 69362b3135c2..0bcfeadbc52d 100644 --- a/Documentation/media/kapi/mc-core.rst +++ b/Documentation/media/kapi/mc-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Media Controller devices ------------------------ diff --git a/Documentation/media/kapi/rc-core.rst b/Documentation/media/kapi/rc-core.rst index 4759f020d6b2..53f5e643b6e9 100644 --- a/Documentation/media/kapi/rc-core.rst +++ b/Documentation/media/kapi/rc-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Remote Controller devices ------------------------- diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst index 523ff9eb09a0..3422330b3b1f 100644 --- a/Documentation/media/kapi/v4l2-async.rst +++ b/Documentation/media/kapi/v4l2-async.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 async kAPI ^^^^^^^^^^^^^^^ .. kernel-doc:: include/media/v4l2-async.h diff --git a/Documentation/media/kapi/v4l2-clocks.rst b/Documentation/media/kapi/v4l2-clocks.rst index b8a895860a8a..5c22eecab7ba 100644 --- a/Documentation/media/kapi/v4l2-clocks.rst +++ b/Documentation/media/kapi/v4l2-clocks.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 clocks ----------- diff --git a/Documentation/media/kapi/v4l2-common.rst b/Documentation/media/kapi/v4l2-common.rst index 525d804871ff..b1e70eb56aa4 100644 --- a/Documentation/media/kapi/v4l2-common.rst +++ b/Documentation/media/kapi/v4l2-common.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 common functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-controls.rst b/Documentation/media/kapi/v4l2-controls.rst index 07a179eeb2fb..64ab99abf0b6 100644 --- a/Documentation/media/kapi/v4l2-controls.rst +++ b/Documentation/media/kapi/v4l2-controls.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Controls ============= diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst index 5cf292037a48..0dcad7a23141 100644 --- a/Documentation/media/kapi/v4l2-core.rst +++ b/Documentation/media/kapi/v4l2-core.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Video4Linux devices ------------------- diff --git a/Documentation/media/kapi/v4l2-dev.rst b/Documentation/media/kapi/v4l2-dev.rst index eb03ccc41c41..b359f1804bbe 100644 --- a/Documentation/media/kapi/v4l2-dev.rst +++ b/Documentation/media/kapi/v4l2-dev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Video device' s internal representation ======================================= diff --git a/Documentation/media/kapi/v4l2-device.rst b/Documentation/media/kapi/v4l2-device.rst index 6c58bbbaa66f..c4311f0421be 100644 --- a/Documentation/media/kapi/v4l2-device.rst +++ b/Documentation/media/kapi/v4l2-device.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 device instance -------------------- diff --git a/Documentation/media/kapi/v4l2-dv-timings.rst b/Documentation/media/kapi/v4l2-dv-timings.rst index 55274329d229..b178f931518b 100644 --- a/Documentation/media/kapi/v4l2-dv-timings.rst +++ b/Documentation/media/kapi/v4l2-dv-timings.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 DV Timings functions ^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-event.rst b/Documentation/media/kapi/v4l2-event.rst index 5c7e31224ddc..a4b7ae2b94d8 100644 --- a/Documentation/media/kapi/v4l2-event.rst +++ b/Documentation/media/kapi/v4l2-event.rst @@ -1,3 +1,4 @@ +.. SPDX-License-Identifier: GPL-2.0 V4L2 events ----------- diff --git a/Documentation/media/kapi/v4l2-fh.rst b/Documentation/media/kapi/v4l2-fh.rst index 3ee64adf4635..4c62b19af744 100644 --- a/Documentation/media/kapi/v4l2-fh.rst +++ b/Documentation/media/kapi/v4l2-fh.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 File handlers ------------------ diff --git a/Documentation/media/kapi/v4l2-flash-led-class.rst b/Documentation/media/kapi/v4l2-flash-led-class.rst index 20798bdac387..2aa6bed9b8db 100644 --- a/Documentation/media/kapi/v4l2-flash-led-class.rst +++ b/Documentation/media/kapi/v4l2-flash-led-class.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 flash functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-fwnode.rst b/Documentation/media/kapi/v4l2-fwnode.rst index 6c8bccdfeb25..e313b6cddcd0 100644 --- a/Documentation/media/kapi/v4l2-fwnode.rst +++ b/Documentation/media/kapi/v4l2-fwnode.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 fwnode kAPI ^^^^^^^^^^^^^^^^ .. kernel-doc:: include/media/v4l2-fwnode.h diff --git a/Documentation/media/kapi/v4l2-intro.rst b/Documentation/media/kapi/v4l2-intro.rst index e614d8d4ca1c..cea3e263e48b 100644 --- a/Documentation/media/kapi/v4l2-intro.rst +++ b/Documentation/media/kapi/v4l2-intro.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Introduction ------------ diff --git a/Documentation/media/kapi/v4l2-mc.rst b/Documentation/media/kapi/v4l2-mc.rst index 8af347013490..0c352ac588b2 100644 --- a/Documentation/media/kapi/v4l2-mc.rst +++ b/Documentation/media/kapi/v4l2-mc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Media Controller functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-mediabus.rst b/Documentation/media/kapi/v4l2-mediabus.rst index e64131906d11..1f2254cba92d 100644 --- a/Documentation/media/kapi/v4l2-mediabus.rst +++ b/Documentation/media/kapi/v4l2-mediabus.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Media Bus functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-mem2mem.rst b/Documentation/media/kapi/v4l2-mem2mem.rst index 5536b4a71e51..a43b31cc8261 100644 --- a/Documentation/media/kapi/v4l2-mem2mem.rst +++ b/Documentation/media/kapi/v4l2-mem2mem.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 Memory to Memory functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-rect.rst b/Documentation/media/kapi/v4l2-rect.rst index 8df5067ad57d..fc315cd84156 100644 --- a/Documentation/media/kapi/v4l2-rect.rst +++ b/Documentation/media/kapi/v4l2-rect.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 rect helper functions ^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-subdev.rst b/Documentation/media/kapi/v4l2-subdev.rst index 1280e05b662b..be4970909f40 100644 --- a/Documentation/media/kapi/v4l2-subdev.rst +++ b/Documentation/media/kapi/v4l2-subdev.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + V4L2 sub-devices ---------------- diff --git a/Documentation/media/kapi/v4l2-tuner.rst b/Documentation/media/kapi/v4l2-tuner.rst index 86e894639651..e6caa3321566 100644 --- a/Documentation/media/kapi/v4l2-tuner.rst +++ b/Documentation/media/kapi/v4l2-tuner.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-tveeprom.rst b/Documentation/media/kapi/v4l2-tveeprom.rst index 33422cb26aa7..43fb391edaba 100644 --- a/Documentation/media/kapi/v4l2-tveeprom.rst +++ b/Documentation/media/kapi/v4l2-tveeprom.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Hauppauge TV EEPROM functions and data structures ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/media/kapi/v4l2-videobuf.rst b/Documentation/media/kapi/v4l2-videobuf.rst index 54adfd772d28..1a7756397b1a 100644 --- a/Documentation/media/kapi/v4l2-videobuf.rst +++ b/Documentation/media/kapi/v4l2-videobuf.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. _vb_framework: Videobuf Framework diff --git a/Documentation/media/kapi/v4l2-videobuf2.rst b/Documentation/media/kapi/v4l2-videobuf2.rst index 3c4cb1e7e05f..1044f64ff168 100644 --- a/Documentation/media/kapi/v4l2-videobuf2.rst +++ b/Documentation/media/kapi/v4l2-videobuf2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. _vb2_framework: V4L2 videobuf2 functions and data structures diff --git a/Documentation/media/lirc.h.rst.exceptions b/Documentation/media/lirc.h.rst.exceptions index 984b61dc3f2e..379b9e7df5d0 100644 --- a/Documentation/media/lirc.h.rst.exceptions +++ b/Documentation/media/lirc.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _LINUX_LIRC_H diff --git a/Documentation/media/media.h.rst.exceptions b/Documentation/media/media.h.rst.exceptions index 684fe9c86dee..9b4c26502d95 100644 --- a/Documentation/media/media.h.rst.exceptions +++ b/Documentation/media/media.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define __LINUX_MEDIA_H diff --git a/Documentation/media/media_kapi.rst b/Documentation/media/media_kapi.rst index 83da736fad72..1389998c90f7 100644 --- a/Documentation/media/media_kapi.rst +++ b/Documentation/media/media_kapi.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> diff --git a/Documentation/media/media_uapi.rst b/Documentation/media/media_uapi.rst index 28eb35a1f965..0753005c7bb4 100644 --- a/Documentation/media/media_uapi.rst +++ b/Documentation/media/media_uapi.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> @@ -10,9 +10,9 @@ Linux Media Infrastructure userspace API Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or -any later version published by the Free Software Foundation. A copy of -the license is included in the chapter entitled "GNU Free Documentation -License". +any later version published by the Free Software Foundation, with no +Invariant Sections. A copy of the license is included in the chapter +entitled "GNU Free Documentation License". .. only:: html diff --git a/Documentation/media/net.h.rst.exceptions b/Documentation/media/net.h.rst.exceptions index afe6bef91567..5159aa4bbbb9 100644 --- a/Documentation/media/net.h.rst.exceptions +++ b/Documentation/media/net.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _DVBNET_H_ diff --git a/Documentation/media/typical_media_device.svg b/Documentation/media/typical_media_device.svg index d6fad90ec199..bfd5c7db3b00 100644 --- a/Documentation/media/typical_media_device.svg +++ b/Documentation/media/typical_media_device.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z" fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst index 1e2cf498ba30..b614bf81aa20 100644 --- a/Documentation/media/uapi/cec/cec-api.rst +++ b/Documentation/media/uapi/cec/cec-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst index 334358dfa72e..e10d675546f8 100644 --- a/Documentation/media/uapi/cec/cec-func-close.rst +++ b/Documentation/media/uapi/cec/cec-func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-close: diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst index e2b6260b0086..c18d4ba5eb37 100644 --- a/Documentation/media/uapi/cec/cec-func-ioctl.rst +++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-ioctl: diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst index 5d6663a649bd..f235aa80155c 100644 --- a/Documentation/media/uapi/cec/cec-func-open.rst +++ b/Documentation/media/uapi/cec/cec-func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-open: diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst index c698c969635c..3f6c5b0effa3 100644 --- a/Documentation/media/uapi/cec/cec-func-poll.rst +++ b/Documentation/media/uapi/cec/cec-func-poll.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec-func-poll: diff --git a/Documentation/media/uapi/cec/cec-funcs.rst b/Documentation/media/uapi/cec/cec-funcs.rst index 6d696cead5cb..620590b168c9 100644 --- a/Documentation/media/uapi/cec/cec-funcs.rst +++ b/Documentation/media/uapi/cec/cec-funcs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _cec-user-func: ****************** diff --git a/Documentation/media/uapi/cec/cec-header.rst b/Documentation/media/uapi/cec/cec-header.rst index d5a9a2828274..726f9766a130 100644 --- a/Documentation/media/uapi/cec/cec-header.rst +++ b/Documentation/media/uapi/cec/cec-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _cec_header: diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst index 07ee2b8f89d6..05088fcefe81 100644 --- a/Documentation/media/uapi/cec/cec-intro.rst +++ b/Documentation/media/uapi/cec/cec-intro.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _cec-intro: Introduction diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index 6c1f6efb822e..0c44f31a9b59 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_G_CAPS: diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index 84f431a022ad..26465094e3f1 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_LOG_ADDRS: .. _CEC_ADAP_G_LOG_ADDRS: diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst index 9e49d4be35d5..693be2f9bf2e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_ADAP_PHYS_ADDR: .. _CEC_ADAP_G_PHYS_ADDR: diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index 8d5633e6ae04..46a1c99a595e 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_DQEVENT: diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 508e2e325683..c53bb5f73f0d 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_MODE: .. _CEC_G_MODE: diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index b25e48afaa08..c3a685ff05cb 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CEC_TRANSMIT: .. _CEC_RECEIVE: diff --git a/Documentation/media/uapi/cec/cec-pin-error-inj.rst b/Documentation/media/uapi/cec/cec-pin-error-inj.rst index 464b006dbe0a..725f8b1c9965 100644 --- a/Documentation/media/uapi/cec/cec-pin-error-inj.rst +++ b/Documentation/media/uapi/cec/cec-pin-error-inj.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + CEC Pin Framework Error Injection ================================= diff --git a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst index 1279bd21dbd0..ee2ee74dafa3 100644 --- a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst +++ b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_BILINGUAL_CHANNEL_SELECT: diff --git a/Documentation/media/uapi/dvb/audio-channel-select.rst b/Documentation/media/uapi/dvb/audio-channel-select.rst index 8cab3d7abff5..ebb2f121c4c8 100644 --- a/Documentation/media/uapi/dvb/audio-channel-select.rst +++ b/Documentation/media/uapi/dvb/audio-channel-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CHANNEL_SELECT: diff --git a/Documentation/media/uapi/dvb/audio-clear-buffer.rst b/Documentation/media/uapi/dvb/audio-clear-buffer.rst index f6bed67cb070..c5b62cde18c8 100644 --- a/Documentation/media/uapi/dvb/audio-clear-buffer.rst +++ b/Documentation/media/uapi/dvb/audio-clear-buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CLEAR_BUFFER: diff --git a/Documentation/media/uapi/dvb/audio-continue.rst b/Documentation/media/uapi/dvb/audio-continue.rst index ca587869306e..6bdc99e39e20 100644 --- a/Documentation/media/uapi/dvb/audio-continue.rst +++ b/Documentation/media/uapi/dvb/audio-continue.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_CONTINUE: diff --git a/Documentation/media/uapi/dvb/audio-fclose.rst b/Documentation/media/uapi/dvb/audio-fclose.rst index 58d351a3af4b..1e4ad7a0325d 100644 --- a/Documentation/media/uapi/dvb/audio-fclose.rst +++ b/Documentation/media/uapi/dvb/audio-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fclose: diff --git a/Documentation/media/uapi/dvb/audio-fopen.rst b/Documentation/media/uapi/dvb/audio-fopen.rst index 4a174640bf11..2cf4d83661f4 100644 --- a/Documentation/media/uapi/dvb/audio-fopen.rst +++ b/Documentation/media/uapi/dvb/audio-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fopen: diff --git a/Documentation/media/uapi/dvb/audio-fwrite.rst b/Documentation/media/uapi/dvb/audio-fwrite.rst index 4980ae7953ef..6dc6bf6cbbc7 100644 --- a/Documentation/media/uapi/dvb/audio-fwrite.rst +++ b/Documentation/media/uapi/dvb/audio-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_fwrite: diff --git a/Documentation/media/uapi/dvb/audio-get-capabilities.rst b/Documentation/media/uapi/dvb/audio-get-capabilities.rst index 0d867f189c22..4f1ec47e8ac2 100644 --- a/Documentation/media/uapi/dvb/audio-get-capabilities.rst +++ b/Documentation/media/uapi/dvb/audio-get-capabilities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_GET_CAPABILITIES: diff --git a/Documentation/media/uapi/dvb/audio-get-status.rst b/Documentation/media/uapi/dvb/audio-get-status.rst index 857b058325f1..30e4dd7fce6d 100644 --- a/Documentation/media/uapi/dvb/audio-get-status.rst +++ b/Documentation/media/uapi/dvb/audio-get-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_GET_STATUS: diff --git a/Documentation/media/uapi/dvb/audio-pause.rst b/Documentation/media/uapi/dvb/audio-pause.rst index c7310dffbff2..4567ecd9e0a3 100644 --- a/Documentation/media/uapi/dvb/audio-pause.rst +++ b/Documentation/media/uapi/dvb/audio-pause.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_PAUSE: diff --git a/Documentation/media/uapi/dvb/audio-play.rst b/Documentation/media/uapi/dvb/audio-play.rst index 943b5eec9f28..17acd4c411b8 100644 --- a/Documentation/media/uapi/dvb/audio-play.rst +++ b/Documentation/media/uapi/dvb/audio-play.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_PLAY: diff --git a/Documentation/media/uapi/dvb/audio-select-source.rst b/Documentation/media/uapi/dvb/audio-select-source.rst index c0434a0bd324..c5ed6243b11c 100644 --- a/Documentation/media/uapi/dvb/audio-select-source.rst +++ b/Documentation/media/uapi/dvb/audio-select-source.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SELECT_SOURCE: diff --git a/Documentation/media/uapi/dvb/audio-set-av-sync.rst b/Documentation/media/uapi/dvb/audio-set-av-sync.rst index cf621f3a3037..c116d105fdea 100644 --- a/Documentation/media/uapi/dvb/audio-set-av-sync.rst +++ b/Documentation/media/uapi/dvb/audio-set-av-sync.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_AV_SYNC: diff --git a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst index f0db1fbdb066..d537da90acf5 100644 --- a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst +++ b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_BYPASS_MODE: diff --git a/Documentation/media/uapi/dvb/audio-set-id.rst b/Documentation/media/uapi/dvb/audio-set-id.rst index 8b1081d24473..aeb6ace6cd1e 100644 --- a/Documentation/media/uapi/dvb/audio-set-id.rst +++ b/Documentation/media/uapi/dvb/audio-set-id.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_ID: diff --git a/Documentation/media/uapi/dvb/audio-set-mixer.rst b/Documentation/media/uapi/dvb/audio-set-mixer.rst index 248aab8c8909..60781aa88202 100644 --- a/Documentation/media/uapi/dvb/audio-set-mixer.rst +++ b/Documentation/media/uapi/dvb/audio-set-mixer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_MIXER: diff --git a/Documentation/media/uapi/dvb/audio-set-mute.rst b/Documentation/media/uapi/dvb/audio-set-mute.rst index 0af105a8ddcc..4449f225e48c 100644 --- a/Documentation/media/uapi/dvb/audio-set-mute.rst +++ b/Documentation/media/uapi/dvb/audio-set-mute.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_MUTE: diff --git a/Documentation/media/uapi/dvb/audio-set-streamtype.rst b/Documentation/media/uapi/dvb/audio-set-streamtype.rst index 46c0362ac71d..d20c34fc7128 100644 --- a/Documentation/media/uapi/dvb/audio-set-streamtype.rst +++ b/Documentation/media/uapi/dvb/audio-set-streamtype.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_SET_STREAMTYPE: diff --git a/Documentation/media/uapi/dvb/audio-stop.rst b/Documentation/media/uapi/dvb/audio-stop.rst index dd6c3b6826ec..1bba2e50c364 100644 --- a/Documentation/media/uapi/dvb/audio-stop.rst +++ b/Documentation/media/uapi/dvb/audio-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _AUDIO_STOP: diff --git a/Documentation/media/uapi/dvb/audio.rst b/Documentation/media/uapi/dvb/audio.rst index e9f9e589c486..ebc18fca76a4 100644 --- a/Documentation/media/uapi/dvb/audio.rst +++ b/Documentation/media/uapi/dvb/audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_audio: diff --git a/Documentation/media/uapi/dvb/audio_data_types.rst b/Documentation/media/uapi/dvb/audio_data_types.rst index 5bffa2c98a24..5b032fe13b9d 100644 --- a/Documentation/media/uapi/dvb/audio_data_types.rst +++ b/Documentation/media/uapi/dvb/audio_data_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_data_types: diff --git a/Documentation/media/uapi/dvb/audio_function_calls.rst b/Documentation/media/uapi/dvb/audio_function_calls.rst index 7dba16285dab..5478e78b085e 100644 --- a/Documentation/media/uapi/dvb/audio_function_calls.rst +++ b/Documentation/media/uapi/dvb/audio_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio_function_calls: diff --git a/Documentation/media/uapi/dvb/ca-fclose.rst b/Documentation/media/uapi/dvb/ca-fclose.rst index e84bbfcfa184..e273444ccc67 100644 --- a/Documentation/media/uapi/dvb/ca-fclose.rst +++ b/Documentation/media/uapi/dvb/ca-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_fclose: diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst index 056c71b53a70..e11ebeae5693 100644 --- a/Documentation/media/uapi/dvb/ca-fopen.rst +++ b/Documentation/media/uapi/dvb/ca-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_fopen: diff --git a/Documentation/media/uapi/dvb/ca-get-cap.rst b/Documentation/media/uapi/dvb/ca-get-cap.rst index d2d5c1355396..9e4fb5186373 100644 --- a/Documentation/media/uapi/dvb/ca-get-cap.rst +++ b/Documentation/media/uapi/dvb/ca-get-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_CAP: diff --git a/Documentation/media/uapi/dvb/ca-get-descr-info.rst b/Documentation/media/uapi/dvb/ca-get-descr-info.rst index e564fbb8d524..80ef43a339df 100644 --- a/Documentation/media/uapi/dvb/ca-get-descr-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-descr-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_DESCR_INFO: diff --git a/Documentation/media/uapi/dvb/ca-get-msg.rst b/Documentation/media/uapi/dvb/ca-get-msg.rst index ceeda623ce93..bcb7955a0ddc 100644 --- a/Documentation/media/uapi/dvb/ca-get-msg.rst +++ b/Documentation/media/uapi/dvb/ca-get-msg.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_MSG: diff --git a/Documentation/media/uapi/dvb/ca-get-slot-info.rst b/Documentation/media/uapi/dvb/ca-get-slot-info.rst index 1a1d6f0c71b9..1ea5c497f2ea 100644 --- a/Documentation/media/uapi/dvb/ca-get-slot-info.rst +++ b/Documentation/media/uapi/dvb/ca-get-slot-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_GET_SLOT_INFO: diff --git a/Documentation/media/uapi/dvb/ca-reset.rst b/Documentation/media/uapi/dvb/ca-reset.rst index 29788325f90e..29fda19984be 100644 --- a/Documentation/media/uapi/dvb/ca-reset.rst +++ b/Documentation/media/uapi/dvb/ca-reset.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_RESET: diff --git a/Documentation/media/uapi/dvb/ca-send-msg.rst b/Documentation/media/uapi/dvb/ca-send-msg.rst index 9e91287b7bbc..5a3c4e8120c4 100644 --- a/Documentation/media/uapi/dvb/ca-send-msg.rst +++ b/Documentation/media/uapi/dvb/ca-send-msg.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_SEND_MSG: diff --git a/Documentation/media/uapi/dvb/ca-set-descr.rst b/Documentation/media/uapi/dvb/ca-set-descr.rst index a6c47205ffd8..22c8b8f94c7e 100644 --- a/Documentation/media/uapi/dvb/ca-set-descr.rst +++ b/Documentation/media/uapi/dvb/ca-set-descr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _CA_SET_DESCR: diff --git a/Documentation/media/uapi/dvb/ca.rst b/Documentation/media/uapi/dvb/ca.rst index deac72d89e93..8796512c1378 100644 --- a/Documentation/media/uapi/dvb/ca.rst +++ b/Documentation/media/uapi/dvb/ca.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_ca: diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst index ac7cbd76ddd5..834c8ab4c300 100644 --- a/Documentation/media/uapi/dvb/ca_data_types.rst +++ b/Documentation/media/uapi/dvb/ca_data_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_data_types: diff --git a/Documentation/media/uapi/dvb/ca_function_calls.rst b/Documentation/media/uapi/dvb/ca_function_calls.rst index 87d697851e82..6985bebd0661 100644 --- a/Documentation/media/uapi/dvb/ca_function_calls.rst +++ b/Documentation/media/uapi/dvb/ca_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ca_function_calls: diff --git a/Documentation/media/uapi/dvb/demux.rst b/Documentation/media/uapi/dvb/demux.rst index 45c3d6405c46..d8c0ff4015fe 100644 --- a/Documentation/media/uapi/dvb/demux.rst +++ b/Documentation/media/uapi/dvb/demux.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_demux: diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst index 4d5632dfb43e..f483268e4ede 100644 --- a/Documentation/media/uapi/dvb/dmx-add-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-add-pid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_ADD_PID: diff --git a/Documentation/media/uapi/dvb/dmx-expbuf.rst b/Documentation/media/uapi/dvb/dmx-expbuf.rst index 2d96cfe891df..d7f0658f3db3 100644 --- a/Documentation/media/uapi/dvb/dmx-expbuf.rst +++ b/Documentation/media/uapi/dvb/dmx-expbuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_EXPBUF: **************** diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst index 578e929f4bde..05ff32270274 100644 --- a/Documentation/media/uapi/dvb/dmx-fclose.rst +++ b/Documentation/media/uapi/dvb/dmx-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fclose: diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst index 55628a18ba67..2700a2fad68b 100644 --- a/Documentation/media/uapi/dvb/dmx-fopen.rst +++ b/Documentation/media/uapi/dvb/dmx-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fopen: diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst index 488bdc4ba178..292fa98f39ff 100644 --- a/Documentation/media/uapi/dvb/dmx-fread.rst +++ b/Documentation/media/uapi/dvb/dmx-fread.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fread: diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst index 519e5733e53b..bdd4d4743bd5 100644 --- a/Documentation/media/uapi/dvb/dmx-fwrite.rst +++ b/Documentation/media/uapi/dvb/dmx-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fwrite: diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst index fbdbc12869d1..fcd3dc06c095 100644 --- a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst +++ b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_GET_PES_PIDS: diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst index 604031f7904b..2c81595f470a 100644 --- a/Documentation/media/uapi/dvb/dmx-get-stc.rst +++ b/Documentation/media/uapi/dvb/dmx-get-stc.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_GET_STC: diff --git a/Documentation/media/uapi/dvb/dmx-mmap.rst b/Documentation/media/uapi/dvb/dmx-mmap.rst index 15d107348b9f..34bb7766718f 100644 --- a/Documentation/media/uapi/dvb/dmx-mmap.rst +++ b/Documentation/media/uapi/dvb/dmx-mmap.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _dmx-mmap: ***************** diff --git a/Documentation/media/uapi/dvb/dmx-munmap.rst b/Documentation/media/uapi/dvb/dmx-munmap.rst index d77218732bb6..ef26b6f2b12b 100644 --- a/Documentation/media/uapi/dvb/dmx-munmap.rst +++ b/Documentation/media/uapi/dvb/dmx-munmap.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _dmx-munmap: ************ diff --git a/Documentation/media/uapi/dvb/dmx-qbuf.rst b/Documentation/media/uapi/dvb/dmx-qbuf.rst index be5a4c6f1904..9a1d85147c25 100644 --- a/Documentation/media/uapi/dvb/dmx-qbuf.rst +++ b/Documentation/media/uapi/dvb/dmx-qbuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_QBUF: ************************* diff --git a/Documentation/media/uapi/dvb/dmx-querybuf.rst b/Documentation/media/uapi/dvb/dmx-querybuf.rst index 89481e24bb86..4cf36e821696 100644 --- a/Documentation/media/uapi/dvb/dmx-querybuf.rst +++ b/Documentation/media/uapi/dvb/dmx-querybuf.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_QUERYBUF: ****************** diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst index 456cc2ded2c0..be992f44f306 100644 --- a/Documentation/media/uapi/dvb/dmx-remove-pid.rst +++ b/Documentation/media/uapi/dvb/dmx-remove-pid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_REMOVE_PID: diff --git a/Documentation/media/uapi/dvb/dmx-reqbufs.rst b/Documentation/media/uapi/dvb/dmx-reqbufs.rst index 14b80d60bf35..b302785bf678 100644 --- a/Documentation/media/uapi/dvb/dmx-reqbufs.rst +++ b/Documentation/media/uapi/dvb/dmx-reqbufs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _DMX_REQBUFS: ***************** diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst index 74fd076a9b90..2dee0fb11f62 100644 --- a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst +++ b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_BUFFER_SIZE: diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst index 88594b8d3846..66afbb9f2fe4 100644 --- a/Documentation/media/uapi/dvb/dmx-set-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-filter.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_FILTER: diff --git a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst index d70e7bf96a41..dae5ab7878e5 100644 --- a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst +++ b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_SET_PES_FILTER: diff --git a/Documentation/media/uapi/dvb/dmx-start.rst b/Documentation/media/uapi/dvb/dmx-start.rst index 36700e775296..488289d02504 100644 --- a/Documentation/media/uapi/dvb/dmx-start.rst +++ b/Documentation/media/uapi/dvb/dmx-start.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_START: diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst index 6d9c927bcd5f..982384d12923 100644 --- a/Documentation/media/uapi/dvb/dmx-stop.rst +++ b/Documentation/media/uapi/dvb/dmx-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _DMX_STOP: diff --git a/Documentation/media/uapi/dvb/dmx_fcalls.rst b/Documentation/media/uapi/dvb/dmx_fcalls.rst index 4c391cf2554f..67312ab65f94 100644 --- a/Documentation/media/uapi/dvb/dmx_fcalls.rst +++ b/Documentation/media/uapi/dvb/dmx_fcalls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_fcalls: diff --git a/Documentation/media/uapi/dvb/dmx_types.rst b/Documentation/media/uapi/dvb/dmx_types.rst index 2a023a4f516c..b5cf704199e5 100644 --- a/Documentation/media/uapi/dvb/dmx_types.rst +++ b/Documentation/media/uapi/dvb/dmx_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmx_types: diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst index 212f032cad8b..172783b75fb7 100644 --- a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst +++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb-fe-read-status: diff --git a/Documentation/media/uapi/dvb/dvb-frontend-event.rst b/Documentation/media/uapi/dvb/dvb-frontend-event.rst index 2088bc6cacd8..ad4af66040c7 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-event.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. c:type:: dvb_frontend_event diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst index b152166f8fa7..67c2a316019f 100644 --- a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst +++ b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. c:type:: dvb_frontend_parameters diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst index 89ddca38626f..0fcc01f182f9 100644 --- a/Documentation/media/uapi/dvb/dvbapi.rst +++ b/Documentation/media/uapi/dvb/dvbapi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst index 1a56c1724e59..371c72bb9419 100644 --- a/Documentation/media/uapi/dvb/dvbproperty.rst +++ b/Documentation/media/uapi/dvb/dvbproperty.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-properties: diff --git a/Documentation/media/uapi/dvb/dvbstb.svg b/Documentation/media/uapi/dvb/dvbstb.svg index f6fe2f837373..c7672148d6ff 100644 --- a/Documentation/media/uapi/dvb/dvbstb.svg +++ b/Documentation/media/uapi/dvb/dvbstb.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="15.847cm" height="8.4187cm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.123 12628.122" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><defs id="defs142"><marker id="Arrow1Lend" overflow="visible" orient="auto"><path id="path954" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker><marker id="marker1243" overflow="visible" orient="auto"><path id="path1241" transform="matrix(-.8 0 0 -.8 -10 0)" d="m0 0 5-5-17.5 5 17.5 5z" fill-rule="evenodd" stroke="#000" stroke-width="1pt"/></marker></defs><metadata id="metadata519"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.122" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600z" fill="none" stroke="#000"/><rect id="rect206" class="BoundingBox" x="13.122" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8779" y="-4585.8779"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="1281.1219" y="5435.1221"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst index 16dd90fa9e94..eaa41bc8d173 100644 --- a/Documentation/media/uapi/dvb/examples.rst +++ b/Documentation/media/uapi/dvb/examples.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_examples: diff --git a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst index 70256180e9b3..c3d7837b5f87 100644 --- a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst +++ b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************** Frontend bandwidth diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst index f220ee351e15..88fd2186ca4d 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_RECV_SLAVE_REPLY: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst index 78476c1c7bf5..92929c2e75db 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_RESET_OVERLOAD: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst index a7e05914efae..8af872d306aa 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_SEND_BURST: diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst index 6bd3994edfc2..30a48114153c 100644 --- a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISEQC_SEND_MASTER_CMD: diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst index dcf2d20d460f..13811289971b 100644 --- a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst +++ b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_DISHNETWORK_SEND_LEGACY_CMD: diff --git a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst index b20cb360fe37..32b7d140d80b 100644 --- a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_ENABLE_HIGH_LNB_VOLTAGE: diff --git a/Documentation/media/uapi/dvb/fe-get-event.rst b/Documentation/media/uapi/dvb/fe-get-event.rst index 505db94bf183..2573d5b9b636 100644 --- a/Documentation/media/uapi/dvb/fe-get-event.rst +++ b/Documentation/media/uapi/dvb/fe-get-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_EVENT: diff --git a/Documentation/media/uapi/dvb/fe-get-frontend.rst b/Documentation/media/uapi/dvb/fe-get-frontend.rst index 5db552cedd70..6cd5250d1832 100644 --- a/Documentation/media/uapi/dvb/fe-get-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-get-frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_FRONTEND: diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst index 49307c0abfee..551e68b11528 100644 --- a/Documentation/media/uapi/dvb/fe-get-info.rst +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_INFO: diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst index b69741d9cedf..99386c7461b3 100644 --- a/Documentation/media/uapi/dvb/fe-get-property.rst +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_GET_PROPERTY: diff --git a/Documentation/media/uapi/dvb/fe-read-ber.rst b/Documentation/media/uapi/dvb/fe-read-ber.rst index 1e6a79567a4c..e579d648687e 100644 --- a/Documentation/media/uapi/dvb/fe-read-ber.rst +++ b/Documentation/media/uapi/dvb/fe-read-ber.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_BER: diff --git a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst index 198f6dfb53a1..0a0c0c2ff207 100644 --- a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst +++ b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_SIGNAL_STRENGTH: diff --git a/Documentation/media/uapi/dvb/fe-read-snr.rst b/Documentation/media/uapi/dvb/fe-read-snr.rst index 6db22c043512..2a7a0d8f1fd5 100644 --- a/Documentation/media/uapi/dvb/fe-read-snr.rst +++ b/Documentation/media/uapi/dvb/fe-read-snr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_SNR: diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst index 4adb52f084ff..0dfc9fdf568f 100644 --- a/Documentation/media/uapi/dvb/fe-read-status.rst +++ b/Documentation/media/uapi/dvb/fe-read-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_STATUS: diff --git a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst index f2c688bcacb3..19c532f750aa 100644 --- a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst +++ b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_READ_UNCORRECTED_BLOCKS: diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst index 3c4bc179b313..36e8913170e1 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_FRONTEND_TUNE_MODE: diff --git a/Documentation/media/uapi/dvb/fe-set-frontend.rst b/Documentation/media/uapi/dvb/fe-set-frontend.rst index 4f3dcf338254..23caae2588d2 100644 --- a/Documentation/media/uapi/dvb/fe-set-frontend.rst +++ b/Documentation/media/uapi/dvb/fe-set-frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_FRONTEND: diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst index 758efa11014c..fb605e8c9fc4 100644 --- a/Documentation/media/uapi/dvb/fe-set-tone.rst +++ b/Documentation/media/uapi/dvb/fe-set-tone.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_TONE: diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst index 38d4485290a0..c81a8e6a59aa 100644 --- a/Documentation/media/uapi/dvb/fe-set-voltage.rst +++ b/Documentation/media/uapi/dvb/fe-set-voltage.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _FE_SET_VOLTAGE: diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst index dee32ae104d7..9720d2f7ba35 100644 --- a/Documentation/media/uapi/dvb/fe-type-t.rst +++ b/Documentation/media/uapi/dvb/fe-type-t.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************* Frontend type diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst index 3524dcae4604..2fd2954d8dae 100644 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _fe_property_parameters: diff --git a/Documentation/media/uapi/dvb/frontend-header.rst b/Documentation/media/uapi/dvb/frontend-header.rst index 8d8433cf1e12..635fb4251214 100644 --- a/Documentation/media/uapi/dvb/frontend-header.rst +++ b/Documentation/media/uapi/dvb/frontend-header.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + Frontend uAPI data types ======================== diff --git a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst index bf2328627af5..97fbfc228c10 100644 --- a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-cable-systems: diff --git a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst index 2929e6999a7a..2bc880a3c826 100644 --- a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-satellite-systems: diff --git a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst index 0beb5cb3d729..c20af13297e5 100644 --- a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst +++ b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-property-terrestrial-systems: diff --git a/Documentation/media/uapi/dvb/frontend-stat-properties.rst b/Documentation/media/uapi/dvb/frontend-stat-properties.rst index e73754fd0631..546464db04b5 100644 --- a/Documentation/media/uapi/dvb/frontend-stat-properties.rst +++ b/Documentation/media/uapi/dvb/frontend-stat-properties.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend-stat-properties: diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst index 4967c48d46ce..7ff225dfe11c 100644 --- a/Documentation/media/uapi/dvb/frontend.rst +++ b/Documentation/media/uapi/dvb/frontend.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_frontend: diff --git a/Documentation/media/uapi/dvb/frontend_f_close.rst b/Documentation/media/uapi/dvb/frontend_f_close.rst index 67958d73cf34..af87c2a83719 100644 --- a/Documentation/media/uapi/dvb/frontend_f_close.rst +++ b/Documentation/media/uapi/dvb/frontend_f_close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_f_close: diff --git a/Documentation/media/uapi/dvb/frontend_f_open.rst b/Documentation/media/uapi/dvb/frontend_f_open.rst index 8e8cb466c24b..6a46ec5acf7b 100644 --- a/Documentation/media/uapi/dvb/frontend_f_open.rst +++ b/Documentation/media/uapi/dvb/frontend_f_open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_f_open: diff --git a/Documentation/media/uapi/dvb/frontend_fcalls.rst b/Documentation/media/uapi/dvb/frontend_fcalls.rst index b03f9cab6d5a..9b3586f538ea 100644 --- a/Documentation/media/uapi/dvb/frontend_fcalls.rst +++ b/Documentation/media/uapi/dvb/frontend_fcalls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_fcalls: diff --git a/Documentation/media/uapi/dvb/frontend_legacy_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_api.rst index 759833d3eaa4..1ea749d09ca2 100644 --- a/Documentation/media/uapi/dvb/frontend_legacy_api.rst +++ b/Documentation/media/uapi/dvb/frontend_legacy_api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_legacy_types: diff --git a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst index a4d5319cb76b..1567bc73855a 100644 --- a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst +++ b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _frontend_legacy_dvbv3_api: diff --git a/Documentation/media/uapi/dvb/headers.rst b/Documentation/media/uapi/dvb/headers.rst index c13fd537fbff..edeabd9e8e90 100644 --- a/Documentation/media/uapi/dvb/headers.rst +++ b/Documentation/media/uapi/dvb/headers.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + **************************** Digital TV uAPI header files **************************** diff --git a/Documentation/media/uapi/dvb/intro.rst b/Documentation/media/uapi/dvb/intro.rst index 79b4d0e4e920..f1384616ac4e 100644 --- a/Documentation/media/uapi/dvb/intro.rst +++ b/Documentation/media/uapi/dvb/intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_introdution: diff --git a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst index e1b2c9c7b620..a43b4c36d935 100644 --- a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst +++ b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _legacy_dvb_apis: diff --git a/Documentation/media/uapi/dvb/net-add-if.rst b/Documentation/media/uapi/dvb/net-add-if.rst index 6749b70246c5..1188641b453e 100644 --- a/Documentation/media/uapi/dvb/net-add-if.rst +++ b/Documentation/media/uapi/dvb/net-add-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_ADD_IF: diff --git a/Documentation/media/uapi/dvb/net-get-if.rst b/Documentation/media/uapi/dvb/net-get-if.rst index 3733b34da9db..7c4ef4b9d6cc 100644 --- a/Documentation/media/uapi/dvb/net-get-if.rst +++ b/Documentation/media/uapi/dvb/net-get-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_GET_IF: diff --git a/Documentation/media/uapi/dvb/net-remove-if.rst b/Documentation/media/uapi/dvb/net-remove-if.rst index 4ebe07a6b79a..bf9a1602eeec 100644 --- a/Documentation/media/uapi/dvb/net-remove-if.rst +++ b/Documentation/media/uapi/dvb/net-remove-if.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _NET_REMOVE_IF: diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst index 8fa3292eaa42..9e16462a1ef4 100644 --- a/Documentation/media/uapi/dvb/net-types.rst +++ b/Documentation/media/uapi/dvb/net-types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _net_types: diff --git a/Documentation/media/uapi/dvb/net.rst b/Documentation/media/uapi/dvb/net.rst index e0cd4e402627..833daa381968 100644 --- a/Documentation/media/uapi/dvb/net.rst +++ b/Documentation/media/uapi/dvb/net.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _net: diff --git a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst index 51ec0b04b496..9a6badc1d295 100644 --- a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst +++ b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _query-dvb-frontend-info: diff --git a/Documentation/media/uapi/dvb/video-clear-buffer.rst b/Documentation/media/uapi/dvb/video-clear-buffer.rst index 2e51a78a69f1..5eb5546e8ce4 100644 --- a/Documentation/media/uapi/dvb/video-clear-buffer.rst +++ b/Documentation/media/uapi/dvb/video-clear-buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_CLEAR_BUFFER: diff --git a/Documentation/media/uapi/dvb/video-command.rst b/Documentation/media/uapi/dvb/video-command.rst index 536d0fdd8399..020b49645c6b 100644 --- a/Documentation/media/uapi/dvb/video-command.rst +++ b/Documentation/media/uapi/dvb/video-command.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_COMMAND: diff --git a/Documentation/media/uapi/dvb/video-continue.rst b/Documentation/media/uapi/dvb/video-continue.rst index e65e600be632..2ae2067dfba8 100644 --- a/Documentation/media/uapi/dvb/video-continue.rst +++ b/Documentation/media/uapi/dvb/video-continue.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_CONTINUE: diff --git a/Documentation/media/uapi/dvb/video-fast-forward.rst b/Documentation/media/uapi/dvb/video-fast-forward.rst index 70a53e110335..3f805f334ae1 100644 --- a/Documentation/media/uapi/dvb/video-fast-forward.rst +++ b/Documentation/media/uapi/dvb/video-fast-forward.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_FAST_FORWARD: diff --git a/Documentation/media/uapi/dvb/video-fclose.rst b/Documentation/media/uapi/dvb/video-fclose.rst index 8a997ae6f6a7..3b0285b96a3c 100644 --- a/Documentation/media/uapi/dvb/video-fclose.rst +++ b/Documentation/media/uapi/dvb/video-fclose.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fclose: diff --git a/Documentation/media/uapi/dvb/video-fopen.rst b/Documentation/media/uapi/dvb/video-fopen.rst index 203a2c56f10a..7b2a8c750e6a 100644 --- a/Documentation/media/uapi/dvb/video-fopen.rst +++ b/Documentation/media/uapi/dvb/video-fopen.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fopen: diff --git a/Documentation/media/uapi/dvb/video-freeze.rst b/Documentation/media/uapi/dvb/video-freeze.rst index 5a28bdc8badd..6b31a4755d2c 100644 --- a/Documentation/media/uapi/dvb/video-freeze.rst +++ b/Documentation/media/uapi/dvb/video-freeze.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_FREEZE: diff --git a/Documentation/media/uapi/dvb/video-fwrite.rst b/Documentation/media/uapi/dvb/video-fwrite.rst index cfe7c57dcfc7..eb35b79eb85c 100644 --- a/Documentation/media/uapi/dvb/video-fwrite.rst +++ b/Documentation/media/uapi/dvb/video-fwrite.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_fwrite: diff --git a/Documentation/media/uapi/dvb/video-get-capabilities.rst b/Documentation/media/uapi/dvb/video-get-capabilities.rst index 6987f659a1ad..971fdab70e15 100644 --- a/Documentation/media/uapi/dvb/video-get-capabilities.rst +++ b/Documentation/media/uapi/dvb/video-get-capabilities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_CAPABILITIES: diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst index b4f53616db9a..def6c40db601 100644 --- a/Documentation/media/uapi/dvb/video-get-event.rst +++ b/Documentation/media/uapi/dvb/video-get-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_EVENT: diff --git a/Documentation/media/uapi/dvb/video-get-frame-count.rst b/Documentation/media/uapi/dvb/video-get-frame-count.rst index 0ffe22cd6108..ef35da7d4861 100644 --- a/Documentation/media/uapi/dvb/video-get-frame-count.rst +++ b/Documentation/media/uapi/dvb/video-get-frame-count.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_FRAME_COUNT: diff --git a/Documentation/media/uapi/dvb/video-get-pts.rst b/Documentation/media/uapi/dvb/video-get-pts.rst index c73f86f1d35b..86ceefff7834 100644 --- a/Documentation/media/uapi/dvb/video-get-pts.rst +++ b/Documentation/media/uapi/dvb/video-get-pts.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_PTS: diff --git a/Documentation/media/uapi/dvb/video-get-size.rst b/Documentation/media/uapi/dvb/video-get-size.rst index d077fe2305a0..cc92189d31fd 100644 --- a/Documentation/media/uapi/dvb/video-get-size.rst +++ b/Documentation/media/uapi/dvb/video-get-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_SIZE: diff --git a/Documentation/media/uapi/dvb/video-get-status.rst b/Documentation/media/uapi/dvb/video-get-status.rst index ed6ea19827a6..8bfcf8fc3e19 100644 --- a/Documentation/media/uapi/dvb/video-get-status.rst +++ b/Documentation/media/uapi/dvb/video-get-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_GET_STATUS: diff --git a/Documentation/media/uapi/dvb/video-play.rst b/Documentation/media/uapi/dvb/video-play.rst index 2124120aec22..fb3f4f168814 100644 --- a/Documentation/media/uapi/dvb/video-play.rst +++ b/Documentation/media/uapi/dvb/video-play.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_PLAY: diff --git a/Documentation/media/uapi/dvb/video-select-source.rst b/Documentation/media/uapi/dvb/video-select-source.rst index cde6542723ca..32cf025356dc 100644 --- a/Documentation/media/uapi/dvb/video-select-source.rst +++ b/Documentation/media/uapi/dvb/video-select-source.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SELECT_SOURCE: diff --git a/Documentation/media/uapi/dvb/video-set-blank.rst b/Documentation/media/uapi/dvb/video-set-blank.rst index 3858c69496a5..901c3c80f167 100644 --- a/Documentation/media/uapi/dvb/video-set-blank.rst +++ b/Documentation/media/uapi/dvb/video-set-blank.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_BLANK: diff --git a/Documentation/media/uapi/dvb/video-set-display-format.rst b/Documentation/media/uapi/dvb/video-set-display-format.rst index 2ef7401781be..ffdefa341207 100644 --- a/Documentation/media/uapi/dvb/video-set-display-format.rst +++ b/Documentation/media/uapi/dvb/video-set-display-format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_DISPLAY_FORMAT: diff --git a/Documentation/media/uapi/dvb/video-set-format.rst b/Documentation/media/uapi/dvb/video-set-format.rst index 4239a4e365bb..63e60214ab37 100644 --- a/Documentation/media/uapi/dvb/video-set-format.rst +++ b/Documentation/media/uapi/dvb/video-set-format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_FORMAT: diff --git a/Documentation/media/uapi/dvb/video-set-streamtype.rst b/Documentation/media/uapi/dvb/video-set-streamtype.rst index 02a3c2e4e67c..845486a6e049 100644 --- a/Documentation/media/uapi/dvb/video-set-streamtype.rst +++ b/Documentation/media/uapi/dvb/video-set-streamtype.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SET_STREAMTYPE: diff --git a/Documentation/media/uapi/dvb/video-slowmotion.rst b/Documentation/media/uapi/dvb/video-slowmotion.rst index bd3d1a4070d9..32c934aaf2ba 100644 --- a/Documentation/media/uapi/dvb/video-slowmotion.rst +++ b/Documentation/media/uapi/dvb/video-slowmotion.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_SLOWMOTION: diff --git a/Documentation/media/uapi/dvb/video-stillpicture.rst b/Documentation/media/uapi/dvb/video-stillpicture.rst index 6f943f5e27bd..58035a7630e6 100644 --- a/Documentation/media/uapi/dvb/video-stillpicture.rst +++ b/Documentation/media/uapi/dvb/video-stillpicture.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_STILLPICTURE: diff --git a/Documentation/media/uapi/dvb/video-stop.rst b/Documentation/media/uapi/dvb/video-stop.rst index 474309ad31c2..732ace05e34b 100644 --- a/Documentation/media/uapi/dvb/video-stop.rst +++ b/Documentation/media/uapi/dvb/video-stop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_STOP: diff --git a/Documentation/media/uapi/dvb/video-try-command.rst b/Documentation/media/uapi/dvb/video-try-command.rst index 008e6a9ab696..37ecf8e91eb8 100644 --- a/Documentation/media/uapi/dvb/video-try-command.rst +++ b/Documentation/media/uapi/dvb/video-try-command.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDEO_TRY_COMMAND: diff --git a/Documentation/media/uapi/dvb/video.rst b/Documentation/media/uapi/dvb/video.rst index e7d68cd0cf23..6d72ed0e2b2d 100644 --- a/Documentation/media/uapi/dvb/video.rst +++ b/Documentation/media/uapi/dvb/video.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dvb_video: diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst index a4222b6cd2d3..9e8e49e52b19 100644 --- a/Documentation/media/uapi/dvb/video_function_calls.rst +++ b/Documentation/media/uapi/dvb/video_function_calls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_function_calls: diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst index a0942171596c..2ed8aad84003 100644 --- a/Documentation/media/uapi/dvb/video_types.rst +++ b/Documentation/media/uapi/dvb/video_types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video_types: diff --git a/Documentation/media/uapi/fdl-appendix.rst b/Documentation/media/uapi/fdl-appendix.rst index fd475180fed8..f8dc85d3939c 100644 --- a/Documentation/media/uapi/fdl-appendix.rst +++ b/Documentation/media/uapi/fdl-appendix.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _fdl: diff --git a/Documentation/media/uapi/gen-errors.rst b/Documentation/media/uapi/gen-errors.rst index 689d3b101ede..043c312dc06d 100644 --- a/Documentation/media/uapi/gen-errors.rst +++ b/Documentation/media/uapi/gen-errors.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _gen_errors: diff --git a/Documentation/media/uapi/mediactl/media-controller-intro.rst b/Documentation/media/uapi/mediactl/media-controller-intro.rst index 3e776c0d8276..281c559c2f3c 100644 --- a/Documentation/media/uapi/mediactl/media-controller-intro.rst +++ b/Documentation/media/uapi/mediactl/media-controller-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-intro: diff --git a/Documentation/media/uapi/mediactl/media-controller-model.rst b/Documentation/media/uapi/mediactl/media-controller-model.rst index 558273cf9570..b6d5902b556d 100644 --- a/Documentation/media/uapi/mediactl/media-controller-model.rst +++ b/Documentation/media/uapi/mediactl/media-controller-model.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-model: diff --git a/Documentation/media/uapi/mediactl/media-controller.rst b/Documentation/media/uapi/mediactl/media-controller.rst index 66aff38cd499..6e624f690331 100644 --- a/Documentation/media/uapi/mediactl/media-controller.rst +++ b/Documentation/media/uapi/mediactl/media-controller.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/mediactl/media-func-close.rst b/Documentation/media/uapi/mediactl/media-func-close.rst index a8f5203afe4b..369ccd4dee56 100644 --- a/Documentation/media/uapi/mediactl/media-func-close.rst +++ b/Documentation/media/uapi/mediactl/media-func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-close: diff --git a/Documentation/media/uapi/mediactl/media-func-ioctl.rst b/Documentation/media/uapi/mediactl/media-func-ioctl.rst index fe072b7c8765..9a990d6480f5 100644 --- a/Documentation/media/uapi/mediactl/media-func-ioctl.rst +++ b/Documentation/media/uapi/mediactl/media-func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-ioctl: diff --git a/Documentation/media/uapi/mediactl/media-func-open.rst b/Documentation/media/uapi/mediactl/media-func-open.rst index 32f53016a9e5..cd2f840ddf73 100644 --- a/Documentation/media/uapi/mediactl/media-func-open.rst +++ b/Documentation/media/uapi/mediactl/media-func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-func-open: diff --git a/Documentation/media/uapi/mediactl/media-funcs.rst b/Documentation/media/uapi/mediactl/media-funcs.rst index 260f9dcadcde..87b65df8252a 100644 --- a/Documentation/media/uapi/mediactl/media-funcs.rst +++ b/Documentation/media/uapi/mediactl/media-funcs.rst @@ -1,3 +1,12 @@ +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _media-user-func: ****************** diff --git a/Documentation/media/uapi/mediactl/media-header.rst b/Documentation/media/uapi/mediactl/media-header.rst index 96f7b0155e5a..1cb7c88aeff0 100644 --- a/Documentation/media/uapi/mediactl/media-header.rst +++ b/Documentation/media/uapi/mediactl/media-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_header: diff --git a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst index c6f224e404b7..f8038cfb708c 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-device-info.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-device-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_device_info: diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst index 02738640e34e..6218d9cbdd83 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-entities.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_enum_entities: diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst index b89aaae373df..a982f16e55a4 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_enum_links: diff --git a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst index 4e1c59238371..0a7d76ac8ded 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-g-topology.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_g_topology: diff --git a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst index 0f8b31874002..6d4ca4ada2e0 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_request_alloc: diff --git a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst index e345e7dc9ad7..ae39dbbe48a0 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-setup-link.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_setup_link: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst index 6dd2d7fea714..fc8458746d51 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_queue: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst index febe888494c8..61381e87665a 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_reinit: diff --git a/Documentation/media/uapi/mediactl/media-types.rst b/Documentation/media/uapi/mediactl/media-types.rst index e4c57c8f4553..8627587b7075 100644 --- a/Documentation/media/uapi/mediactl/media-types.rst +++ b/Documentation/media/uapi/mediactl/media-types.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _media-controller-types: diff --git a/Documentation/media/uapi/mediactl/request-api.rst b/Documentation/media/uapi/mediactl/request-api.rst index 5f4a23029c48..4b25ad03f45a 100644 --- a/Documentation/media/uapi/mediactl/request-api.rst +++ b/Documentation/media/uapi/mediactl/request-api.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media-request-api: diff --git a/Documentation/media/uapi/mediactl/request-func-close.rst b/Documentation/media/uapi/mediactl/request-func-close.rst index 098d7f2b9548..2cff7770558e 100644 --- a/Documentation/media/uapi/mediactl/request-func-close.rst +++ b/Documentation/media/uapi/mediactl/request-func-close.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-close: diff --git a/Documentation/media/uapi/mediactl/request-func-ioctl.rst b/Documentation/media/uapi/mediactl/request-func-ioctl.rst index ff7b072a6999..de0781c61873 100644 --- a/Documentation/media/uapi/mediactl/request-func-ioctl.rst +++ b/Documentation/media/uapi/mediactl/request-func-ioctl.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-ioctl: diff --git a/Documentation/media/uapi/mediactl/request-func-poll.rst b/Documentation/media/uapi/mediactl/request-func-poll.rst index 85191254f381..ebaf33e21873 100644 --- a/Documentation/media/uapi/mediactl/request-func-poll.rst +++ b/Documentation/media/uapi/mediactl/request-func-poll.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation version 2 of +.. the License. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-poll: diff --git a/Documentation/media/uapi/rc/keytable.c.rst b/Documentation/media/uapi/rc/keytable.c.rst index 217237f93b37..46f98569e999 100644 --- a/Documentation/media/uapi/rc/keytable.c.rst +++ b/Documentation/media/uapi/rc/keytable.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: uapi/v4l/keytable.c ========================= diff --git a/Documentation/media/uapi/rc/lirc-dev-intro.rst b/Documentation/media/uapi/rc/lirc-dev-intro.rst index 11516c8bff62..1a901d8e1797 100644 --- a/Documentation/media/uapi/rc/lirc-dev-intro.rst +++ b/Documentation/media/uapi/rc/lirc-dev-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_dev_intro: diff --git a/Documentation/media/uapi/rc/lirc-dev.rst b/Documentation/media/uapi/rc/lirc-dev.rst index 03cde25f5859..7058e0b2296a 100644 --- a/Documentation/media/uapi/rc/lirc-dev.rst +++ b/Documentation/media/uapi/rc/lirc-dev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_dev: diff --git a/Documentation/media/uapi/rc/lirc-func.rst b/Documentation/media/uapi/rc/lirc-func.rst index ddb4620de294..25058369f724 100644 --- a/Documentation/media/uapi/rc/lirc-func.rst +++ b/Documentation/media/uapi/rc/lirc-func.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_func: diff --git a/Documentation/media/uapi/rc/lirc-get-features.rst b/Documentation/media/uapi/rc/lirc-get-features.rst index 889a8807037b..1d590df8164a 100644 --- a/Documentation/media/uapi/rc/lirc-get-features.rst +++ b/Documentation/media/uapi/rc/lirc-get-features.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_features: diff --git a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst index 2722118484fa..0a3e02aca80e 100644 --- a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_rec_mode: .. _lirc_set_rec_mode: diff --git a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst b/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst index 6e016edc2bc4..f560b694ccf2 100644 --- a/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst +++ b/Documentation/media/uapi/rc/lirc-get-rec-resolution.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_rec_resolution: diff --git a/Documentation/media/uapi/rc/lirc-get-send-mode.rst b/Documentation/media/uapi/rc/lirc-get-send-mode.rst index c44e61a79ad1..4f440c697052 100644 --- a/Documentation/media/uapi/rc/lirc-get-send-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-send-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_send_mode: .. _lirc_set_send_mode: diff --git a/Documentation/media/uapi/rc/lirc-get-timeout.rst b/Documentation/media/uapi/rc/lirc-get-timeout.rst index c94bc5dcaa8e..1de214529f27 100644 --- a/Documentation/media/uapi/rc/lirc-get-timeout.rst +++ b/Documentation/media/uapi/rc/lirc-get-timeout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_get_min_timeout: .. _lirc_get_max_timeout: diff --git a/Documentation/media/uapi/rc/lirc-header.rst b/Documentation/media/uapi/rc/lirc-header.rst index 487fe00e5517..c9b4f33e1031 100644 --- a/Documentation/media/uapi/rc/lirc-header.rst +++ b/Documentation/media/uapi/rc/lirc-header.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_header: diff --git a/Documentation/media/uapi/rc/lirc-read.rst b/Documentation/media/uapi/rc/lirc-read.rst index c024aaffb8ad..a8fedfaaf0ab 100644 --- a/Documentation/media/uapi/rc/lirc-read.rst +++ b/Documentation/media/uapi/rc/lirc-read.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc-read: diff --git a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst index 6307b5715595..c80acd85e369 100644 --- a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst +++ b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_measure_carrier_mode: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst index a89246806c4b..443681d5cc10 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_carrier_range: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst b/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst index a411c0330818..cbe1e48b2a4a 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-carrier.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_carrier: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst index 86353e602695..d06d69414c1e 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_timeout_reports: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst index a833a6a4c25a..163ac6065737 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_rec_timeout: .. _lirc_get_rec_timeout: diff --git a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst b/Documentation/media/uapi/rc/lirc-set-send-carrier.rst index 42c8cfb42df5..cffc6c1e15cc 100644 --- a/Documentation/media/uapi/rc/lirc-set-send-carrier.rst +++ b/Documentation/media/uapi/rc/lirc-set-send-carrier.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_send_carrier: diff --git a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst b/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst index 20d07c2a37a5..08ab3d1a96cd 100644 --- a/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst +++ b/Documentation/media/uapi/rc/lirc-set-send-duty-cycle.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_send_duty_cycle: diff --git a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst b/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst index 69b7ad8c2afb..889a739eaf0d 100644 --- a/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst +++ b/Documentation/media/uapi/rc/lirc-set-transmitter-mask.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_transmitter_mask: diff --git a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst b/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst index 0415c6a54f23..592715452fce 100644 --- a/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst +++ b/Documentation/media/uapi/rc/lirc-set-wideband-receiver.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc_set_wideband_receiver: diff --git a/Documentation/media/uapi/rc/lirc-write.rst b/Documentation/media/uapi/rc/lirc-write.rst index d4566b0a2015..6adf5ddbac99 100644 --- a/Documentation/media/uapi/rc/lirc-write.rst +++ b/Documentation/media/uapi/rc/lirc-write.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _lirc-write: diff --git a/Documentation/media/uapi/rc/rc-intro.rst b/Documentation/media/uapi/rc/rc-intro.rst index 3707c29d37ed..37c5f90c76e7 100644 --- a/Documentation/media/uapi/rc/rc-intro.rst +++ b/Documentation/media/uapi/rc/rc-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_Intro: diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst index 2d01358d5504..b8e8319e3317 100644 --- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst +++ b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _remote_controllers_sysfs_nodes: diff --git a/Documentation/media/uapi/rc/rc-table-change.rst b/Documentation/media/uapi/rc/rc-table-change.rst index d604896bca87..4a2e601b89fb 100644 --- a/Documentation/media/uapi/rc/rc-table-change.rst +++ b/Documentation/media/uapi/rc/rc-table-change.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_table_change: diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst index c8ae9479f842..cb670d10998b 100644 --- a/Documentation/media/uapi/rc/rc-tables.rst +++ b/Documentation/media/uapi/rc/rc-tables.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _Remote_controllers_tables: diff --git a/Documentation/media/uapi/rc/remote_controllers.rst b/Documentation/media/uapi/rc/remote_controllers.rst index 46a8acb82125..3051f7abe11d 100644 --- a/Documentation/media/uapi/rc/remote_controllers.rst +++ b/Documentation/media/uapi/rc/remote_controllers.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> diff --git a/Documentation/media/uapi/v4l/app-pri.rst b/Documentation/media/uapi/v4l/app-pri.rst index a8c41a7ec396..c25c1271b4f6 100644 --- a/Documentation/media/uapi/v4l/app-pri.rst +++ b/Documentation/media/uapi/v4l/app-pri.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _app-pri: @@ -8,7 +15,7 @@ Application Priority When multiple applications share a device it may be desirable to assign them different priorities. Contrary to the traditional "rm -rf /" school -of thought a video recording application could for example block other +of thought, a video recording application could for example block other applications from changing video controls or switching the current TV channel. Another objective is to permit low priority applications working in background, which can be preempted by user controlled diff --git a/Documentation/media/uapi/v4l/async.rst b/Documentation/media/uapi/v4l/async.rst index 5affc0adb95b..be9539313f60 100644 --- a/Documentation/media/uapi/v4l/async.rst +++ b/Documentation/media/uapi/v4l/async.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _async: diff --git a/Documentation/media/uapi/v4l/audio.rst b/Documentation/media/uapi/v4l/audio.rst index 5ec99a2809fe..4c7fdbc8a860 100644 --- a/Documentation/media/uapi/v4l/audio.rst +++ b/Documentation/media/uapi/v4l/audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _audio: @@ -31,7 +38,7 @@ outputs applications can enumerate them with the :ref:`VIDIOC_ENUMAUDOUT <VIDIOC_ENUMAUDOUT>` ioctl, respectively. The struct :c:type:`v4l2_audio` returned by the :ref:`VIDIOC_ENUMAUDIO` ioctl also contains signal -:status information applicable when the current audio input is queried. +status information applicable when the current audio input is queried. The :ref:`VIDIOC_G_AUDIO <VIDIOC_G_AUDIO>` and :ref:`VIDIOC_G_AUDOUT <VIDIOC_G_AUDOUT>` ioctls report the current diff --git a/Documentation/media/uapi/v4l/bayer.svg b/Documentation/media/uapi/v4l/bayer.svg index c395113d1876..c5bf85103901 100644 --- a/Documentation/media/uapi/v4l/bayer.svg +++ b/Documentation/media/uapi/v4l/bayer.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text> </g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text> diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst index 386d6cf83e9c..ec33768c055e 100644 --- a/Documentation/media/uapi/v4l/biblio.rst +++ b/Documentation/media/uapi/v4l/biblio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ********** References diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst index 2e266d32470a..86878bb0087f 100644 --- a/Documentation/media/uapi/v4l/buffer.rst +++ b/Documentation/media/uapi/v4l/buffer.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _buffer: @@ -465,6 +472,9 @@ enum v4l2_buf_type * - ``V4L2_BUF_TYPE_META_CAPTURE`` - 13 - Buffer for metadata capture, see :ref:`metadata`. + * - ``V4L2_BUF_TYPE_META_OUTPUT`` + - 14 + - Buffer for metadata output, see :ref:`metadata`. diff --git a/Documentation/media/uapi/v4l/capture-example.rst b/Documentation/media/uapi/v4l/capture-example.rst index ac1cd057e25b..130ca47ef796 100644 --- a/Documentation/media/uapi/v4l/capture-example.rst +++ b/Documentation/media/uapi/v4l/capture-example.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _capture-example: diff --git a/Documentation/media/uapi/v4l/capture.c.rst b/Documentation/media/uapi/v4l/capture.c.rst index 56525a0fb2fa..b4652c2351f2 100644 --- a/Documentation/media/uapi/v4l/capture.c.rst +++ b/Documentation/media/uapi/v4l/capture.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: media/v4l/capture.c ========================= diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst index f24615544792..c4e8fc620379 100644 --- a/Documentation/media/uapi/v4l/colorspaces-defs.rst +++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections **************************** Defining Colorspaces in V4L2 diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst index 09fabf4cd412..8b0ba3668101 100644 --- a/Documentation/media/uapi/v4l/colorspaces-details.rst +++ b/Documentation/media/uapi/v4l/colorspaces-details.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ******************************** Detailed Colorspace Descriptions diff --git a/Documentation/media/uapi/v4l/colorspaces.rst b/Documentation/media/uapi/v4l/colorspaces.rst index 322eb94c1d44..c5a560f0c13d 100644 --- a/Documentation/media/uapi/v4l/colorspaces.rst +++ b/Documentation/media/uapi/v4l/colorspaces.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _colorspaces: diff --git a/Documentation/media/uapi/v4l/common-defs.rst b/Documentation/media/uapi/v4l/common-defs.rst index 39058216b630..504c6c93c9b0 100644 --- a/Documentation/media/uapi/v4l/common-defs.rst +++ b/Documentation/media/uapi/v4l/common-defs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _common-defs: diff --git a/Documentation/media/uapi/v4l/common.rst b/Documentation/media/uapi/v4l/common.rst index 5f93e71122ef..889f2f2632a1 100644 --- a/Documentation/media/uapi/v4l/common.rst +++ b/Documentation/media/uapi/v4l/common.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _common: diff --git a/Documentation/media/uapi/v4l/compat.rst b/Documentation/media/uapi/v4l/compat.rst index 8b5e1cebd8f4..f35575a300b4 100644 --- a/Documentation/media/uapi/v4l/compat.rst +++ b/Documentation/media/uapi/v4l/compat.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _compat: diff --git a/Documentation/media/uapi/v4l/constraints.svg b/Documentation/media/uapi/v4l/constraints.svg index 7e5d7185ca49..08f9f8b0985e 100644 --- a/Documentation/media/uapi/v4l/constraints.svg +++ b/Documentation/media/uapi/v4l/constraints.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible" orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible" orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301" diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst index c1e6adbe83d7..0d46526b5935 100644 --- a/Documentation/media/uapi/v4l/control.rst +++ b/Documentation/media/uapi/v4l/control.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _control: diff --git a/Documentation/media/uapi/v4l/crop.rst b/Documentation/media/uapi/v4l/crop.rst index 45e8a895a320..ada7c22e6291 100644 --- a/Documentation/media/uapi/v4l/crop.rst +++ b/Documentation/media/uapi/v4l/crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _crop: diff --git a/Documentation/media/uapi/v4l/crop.svg b/Documentation/media/uapi/v4l/crop.svg index 3878fe4c49e9..32d72598d135 100644 --- a/Documentation/media/uapi/v4l/crop.svg +++ b/Documentation/media/uapi/v4l/crop.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/depth-formats.rst b/Documentation/media/uapi/v4l/depth-formats.rst index d1641e9687a6..1bfd0b82cb85 100644 --- a/Documentation/media/uapi/v4l/depth-formats.rst +++ b/Documentation/media/uapi/v4l/depth-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _depth-formats: @@ -14,3 +21,4 @@ Depth data provides distance to points, mapped onto the image plane pixfmt-inzi pixfmt-z16 + pixfmt-cnf4 diff --git a/Documentation/media/uapi/v4l/dev-capture.rst b/Documentation/media/uapi/v4l/dev-capture.rst index 4218742ab5d9..134e22b32338 100644 --- a/Documentation/media/uapi/v4l/dev-capture.rst +++ b/Documentation/media/uapi/v4l/dev-capture.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _capture: @@ -99,6 +106,6 @@ requests and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_F Reading Images ============== -A video capture device may support the ::ref:`read() function <func-read>` +A video capture device may support the :ref:`read() function <func-read>` and/or streaming (:ref:`memory mapping <func-mmap>` or :ref:`user pointer <userp>`) I/O. See :ref:`io` for details. diff --git a/Documentation/media/uapi/v4l/dev-codec.rst b/Documentation/media/uapi/v4l/dev-codec.rst index c61e938bd8dc..b5e017c17834 100644 --- a/Documentation/media/uapi/v4l/dev-codec.rst +++ b/Documentation/media/uapi/v4l/dev-codec.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _codec: diff --git a/Documentation/media/uapi/v4l/dev-effect.rst b/Documentation/media/uapi/v4l/dev-effect.rst index b946cc9e1064..b165e2c20910 100644 --- a/Documentation/media/uapi/v4l/dev-effect.rst +++ b/Documentation/media/uapi/v4l/dev-effect.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _effect: diff --git a/Documentation/media/uapi/v4l/dev-event.rst b/Documentation/media/uapi/v4l/dev-event.rst index a06ec4d65359..6029101fe1d7 100644 --- a/Documentation/media/uapi/v4l/dev-event.rst +++ b/Documentation/media/uapi/v4l/dev-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _event: diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst index f7ac8d0d3af1..c5dbe882be65 100644 --- a/Documentation/media/uapi/v4l/dev-meta.rst +++ b/Documentation/media/uapi/v4l/dev-meta.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _metadata: @@ -7,21 +14,27 @@ Metadata Interface ****************** Metadata refers to any non-image data that supplements video frames with -additional information. This may include statistics computed over the image -or frame capture parameters supplied by the image source. This interface is -intended for transfer of metadata to userspace and control of that operation. +additional information. This may include statistics computed over the image, +frame capture parameters supplied by the image source or device specific +parameters for specifying how the device processes images. This interface is +intended for transfer of metadata between the userspace and the hardware and +control of that operation. -The metadata interface is implemented on video capture device nodes. The device -can be dedicated to metadata or can implement both video and metadata capture -as specified in its reported capabilities. +The metadata interface is implemented on video device nodes. The device can be +dedicated to metadata or can support both video and metadata as specified in its +reported capabilities. Querying Capabilities ===================== -Device nodes supporting the metadata interface set the ``V4L2_CAP_META_CAPTURE`` -flag in the ``device_caps`` field of the +Device nodes supporting the metadata capture interface set the +``V4L2_CAP_META_CAPTURE`` flag in the ``device_caps`` field of the :c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` -ioctl. That flag means the device can capture metadata to memory. +ioctl. That flag means the device can capture metadata to memory. Similarly, +device nodes supporting metadata output interface set the +``V4L2_CAP_META_OUTPUT`` flag in the ``device_caps`` field of +:c:type:`v4l2_capability` structure. That flag means the device can read +metadata from memory. At least one of the read/write or streaming I/O methods must be supported. @@ -35,12 +48,13 @@ to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be supported as well. To use the :ref:`format` ioctls applications set the ``type`` field of the -:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` and use the -:c:type:`v4l2_meta_format` ``meta`` member of the ``fmt`` union as needed per -the desired operation. Both drivers and applications must set the remainder of -the :c:type:`v4l2_format` structure to 0. +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_META_CAPTURE`` or to +``V4L2_BUF_TYPE_META_OUTPUT`` and use the :c:type:`v4l2_meta_format` ``meta`` +member of the ``fmt`` union as needed per the desired operation. Both drivers +and applications must set the remainder of the :c:type:`v4l2_format` structure +to 0. -.. _v4l2-meta-format: +.. c:type:: v4l2_meta_format .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| diff --git a/Documentation/media/uapi/v4l/dev-osd.rst b/Documentation/media/uapi/v4l/dev-osd.rst index 71da85ed7e4b..d3ad67da6386 100644 --- a/Documentation/media/uapi/v4l/dev-osd.rst +++ b/Documentation/media/uapi/v4l/dev-osd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _osd: diff --git a/Documentation/media/uapi/v4l/dev-output.rst b/Documentation/media/uapi/v4l/dev-output.rst index 342eb4931f5c..3fe1b39696ed 100644 --- a/Documentation/media/uapi/v4l/dev-output.rst +++ b/Documentation/media/uapi/v4l/dev-output.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _output: diff --git a/Documentation/media/uapi/v4l/dev-overlay.rst b/Documentation/media/uapi/v4l/dev-overlay.rst index 9be14b55e305..b91b3837d4e7 100644 --- a/Documentation/media/uapi/v4l/dev-overlay.rst +++ b/Documentation/media/uapi/v4l/dev-overlay.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _overlay: diff --git a/Documentation/media/uapi/v4l/dev-radio.rst b/Documentation/media/uapi/v4l/dev-radio.rst index 2b5b836574eb..133eb0e788c2 100644 --- a/Documentation/media/uapi/v4l/dev-radio.rst +++ b/Documentation/media/uapi/v4l/dev-radio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _radio: diff --git a/Documentation/media/uapi/v4l/dev-raw-vbi.rst b/Documentation/media/uapi/v4l/dev-raw-vbi.rst index 2e6878b624f6..d6a707f0b24f 100644 --- a/Documentation/media/uapi/v4l/dev-raw-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-raw-vbi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _raw-vbi: diff --git a/Documentation/media/uapi/v4l/dev-rds.rst b/Documentation/media/uapi/v4l/dev-rds.rst index 9c4e39dd66bd..624d6f95b842 100644 --- a/Documentation/media/uapi/v4l/dev-rds.rst +++ b/Documentation/media/uapi/v4l/dev-rds.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _rds: diff --git a/Documentation/media/uapi/v4l/dev-sdr.rst b/Documentation/media/uapi/v4l/dev-sdr.rst index b3e828d8cb1f..75595c58cb5b 100644 --- a/Documentation/media/uapi/v4l/dev-sdr.rst +++ b/Documentation/media/uapi/v4l/dev-sdr.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sdr: diff --git a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst index d311a6866b3b..0aa6cb8a272b 100644 --- a/Documentation/media/uapi/v4l/dev-sliced-vbi.rst +++ b/Documentation/media/uapi/v4l/dev-sliced-vbi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sliced: diff --git a/Documentation/media/uapi/v4l/dev-subdev.rst b/Documentation/media/uapi/v4l/dev-subdev.rst index d20d945803a7..2c2768c7343b 100644 --- a/Documentation/media/uapi/v4l/dev-subdev.rst +++ b/Documentation/media/uapi/v4l/dev-subdev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _subdev: diff --git a/Documentation/media/uapi/v4l/dev-teletext.rst b/Documentation/media/uapi/v4l/dev-teletext.rst index 2648f6b37ea3..35e8c4b35458 100644 --- a/Documentation/media/uapi/v4l/dev-teletext.rst +++ b/Documentation/media/uapi/v4l/dev-teletext.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _ttx: @@ -10,7 +17,7 @@ This interface was aimed at devices receiving and demodulating Teletext data [:ref:`ets300706`, :ref:`itu653`], evaluating the Teletext packages and storing formatted pages in cache memory. Such devices are usually implemented as microcontrollers with serial interface -(I:sup:`2`\ C) and could be found on old TV cards, dedicated Teletext +(I\ :sup:`2`\ C) and could be found on old TV cards, dedicated Teletext decoding cards and home-brew devices connected to the PC parallel port. The Teletext API was designed by Martin Buck. It was defined in the diff --git a/Documentation/media/uapi/v4l/dev-touch.rst b/Documentation/media/uapi/v4l/dev-touch.rst index 98797f255ce0..356f01385221 100644 --- a/Documentation/media/uapi/v4l/dev-touch.rst +++ b/Documentation/media/uapi/v4l/dev-touch.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _touch: diff --git a/Documentation/media/uapi/v4l/devices.rst b/Documentation/media/uapi/v4l/devices.rst index fb7f8c26cf09..5dbe9d13b6e6 100644 --- a/Documentation/media/uapi/v4l/devices.rst +++ b/Documentation/media/uapi/v4l/devices.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _devices: diff --git a/Documentation/media/uapi/v4l/diff-v4l.rst b/Documentation/media/uapi/v4l/diff-v4l.rst index 8209eeb63dd2..dd6739e8a5b2 100644 --- a/Documentation/media/uapi/v4l/diff-v4l.rst +++ b/Documentation/media/uapi/v4l/diff-v4l.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _diff-v4l: diff --git a/Documentation/media/uapi/v4l/dmabuf.rst b/Documentation/media/uapi/v4l/dmabuf.rst index 4e980a7e9c9c..bb8fd943b14e 100644 --- a/Documentation/media/uapi/v4l/dmabuf.rst +++ b/Documentation/media/uapi/v4l/dmabuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dmabuf: diff --git a/Documentation/media/uapi/v4l/dv-timings.rst b/Documentation/media/uapi/v4l/dv-timings.rst index 415a0c4e2ccb..b3c69ca559e2 100644 --- a/Documentation/media/uapi/v4l/dv-timings.rst +++ b/Documentation/media/uapi/v4l/dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _dv-timings: diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 65a1d873196b..c471408d9bf9 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _extended-controls: @@ -1110,10 +1117,16 @@ enum v4l2_mpeg_video_h264_loop_filter_mode - ``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (integer)`` Loop filter alpha coefficient, defined in the H264 standard. + This value corresponds to the slice_alpha_c0_offset_div2 slice header + field, and should be in the range of -6 to +6, inclusive. The actual alpha + offset FilterOffsetA is twice this value. Applicable to the H264 encoder. ``V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (integer)`` Loop filter beta coefficient, defined in the H264 standard. + This corresponds to the slice_beta_offset_div2 slice header field, and + should be in the range of -6 to +6, inclusive. The actual beta offset + FilterOffsetB is twice this value. Applicable to the H264 encoder. .. _v4l2-mpeg-video-h264-entropy-mode: @@ -1505,6 +1518,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - configuring a stateless hardware decoding pipeline for MPEG-2. The bitstream parameters are defined according to :ref:`mpeg2part2`. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_slice_params .. cssclass:: longtable @@ -1625,6 +1643,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Specifies quantization matrices (as extracted from the bitstream) for the associated MPEG-2 slice data. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_quantization .. cssclass:: longtable diff --git a/Documentation/media/uapi/v4l/field-order.rst b/Documentation/media/uapi/v4l/field-order.rst index 5f3f82cbfa34..8415268d439c 100644 --- a/Documentation/media/uapi/v4l/field-order.rst +++ b/Documentation/media/uapi/v4l/field-order.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _field-order: diff --git a/Documentation/media/uapi/v4l/fieldseq_bt.svg b/Documentation/media/uapi/v4l/fieldseq_bt.svg index 909d758f8543..1dab1cd1b6de 100644 --- a/Documentation/media/uapi/v4l/fieldseq_bt.svg +++ b/Documentation/media/uapi/v4l/fieldseq_bt.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -2610,4 +2618,4 @@ sodipodi:role="line" y="-328.99481" x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/fieldseq_tb.svg b/Documentation/media/uapi/v4l/fieldseq_tb.svg index 7c74344e770f..041071e43f9b 100644 --- a/Documentation/media/uapi/v4l/fieldseq_tb.svg +++ b/Documentation/media/uapi/v4l/fieldseq_tb.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -2607,4 +2615,4 @@ y="-311.9397" x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338 538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/format.rst b/Documentation/media/uapi/v4l/format.rst index 3e3efb0e349e..9cdb296333b8 100644 --- a/Documentation/media/uapi/v4l/format.rst +++ b/Documentation/media/uapi/v4l/format.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _format: @@ -12,7 +19,7 @@ Data Format Negotiation Different devices exchange different kinds of data with applications, for example video images, raw or sliced VBI data, RDS datagrams. Even -within one kind many different formats are possible, in particular an +within one kind many different formats are possible, in particular there is an abundance of image formats. Although drivers must provide a default and the selection persists across closing and reopening a device, applications should always negotiate a data format before engaging in diff --git a/Documentation/media/uapi/v4l/func-close.rst b/Documentation/media/uapi/v4l/func-close.rst index e85a6744eb91..1a56811b827e 100644 --- a/Documentation/media/uapi/v4l/func-close.rst +++ b/Documentation/media/uapi/v4l/func-close.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-close: diff --git a/Documentation/media/uapi/v4l/func-ioctl.rst b/Documentation/media/uapi/v4l/func-ioctl.rst index ebfbe92f0478..e7a8cf62752e 100644 --- a/Documentation/media/uapi/v4l/func-ioctl.rst +++ b/Documentation/media/uapi/v4l/func-ioctl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-ioctl: diff --git a/Documentation/media/uapi/v4l/func-mmap.rst b/Documentation/media/uapi/v4l/func-mmap.rst index 6d2ce539bd72..75985d80788a 100644 --- a/Documentation/media/uapi/v4l/func-mmap.rst +++ b/Documentation/media/uapi/v4l/func-mmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-mmap: diff --git a/Documentation/media/uapi/v4l/func-munmap.rst b/Documentation/media/uapi/v4l/func-munmap.rst index c2f4043d7d2b..0d472d86a036 100644 --- a/Documentation/media/uapi/v4l/func-munmap.rst +++ b/Documentation/media/uapi/v4l/func-munmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-munmap: diff --git a/Documentation/media/uapi/v4l/func-open.rst b/Documentation/media/uapi/v4l/func-open.rst index deea34cc778b..a3d149ce6635 100644 --- a/Documentation/media/uapi/v4l/func-open.rst +++ b/Documentation/media/uapi/v4l/func-open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-open: diff --git a/Documentation/media/uapi/v4l/func-poll.rst b/Documentation/media/uapi/v4l/func-poll.rst index 967fe8920729..4c579ed31358 100644 --- a/Documentation/media/uapi/v4l/func-poll.rst +++ b/Documentation/media/uapi/v4l/func-poll.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-poll: diff --git a/Documentation/media/uapi/v4l/func-read.rst b/Documentation/media/uapi/v4l/func-read.rst index ae38c2d59d49..14aca4d5e8fd 100644 --- a/Documentation/media/uapi/v4l/func-read.rst +++ b/Documentation/media/uapi/v4l/func-read.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-read: diff --git a/Documentation/media/uapi/v4l/func-select.rst b/Documentation/media/uapi/v4l/func-select.rst index 002dedba2666..af5f1e31c0fb 100644 --- a/Documentation/media/uapi/v4l/func-select.rst +++ b/Documentation/media/uapi/v4l/func-select.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-select: diff --git a/Documentation/media/uapi/v4l/func-write.rst b/Documentation/media/uapi/v4l/func-write.rst index 938f33f85455..865129c726ad 100644 --- a/Documentation/media/uapi/v4l/func-write.rst +++ b/Documentation/media/uapi/v4l/func-write.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _func-write: diff --git a/Documentation/media/uapi/v4l/hist-v4l2.rst b/Documentation/media/uapi/v4l/hist-v4l2.rst index 058b5db95c32..7d8e9efbeb1e 100644 --- a/Documentation/media/uapi/v4l/hist-v4l2.rst +++ b/Documentation/media/uapi/v4l/hist-v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _hist-v4l2: diff --git a/Documentation/media/uapi/v4l/hsv-formats.rst b/Documentation/media/uapi/v4l/hsv-formats.rst index f0f2615eaa95..f52f8ba131f0 100644 --- a/Documentation/media/uapi/v4l/hsv-formats.rst +++ b/Documentation/media/uapi/v4l/hsv-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _hsv-formats: diff --git a/Documentation/media/uapi/v4l/io.rst b/Documentation/media/uapi/v4l/io.rst index 94b38a10ee65..049a2530d3a2 100644 --- a/Documentation/media/uapi/v4l/io.rst +++ b/Documentation/media/uapi/v4l/io.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _io: diff --git a/Documentation/media/uapi/v4l/libv4l-introduction.rst b/Documentation/media/uapi/v4l/libv4l-introduction.rst index ccc3c4d2fc0f..1b206d380d4b 100644 --- a/Documentation/media/uapi/v4l/libv4l-introduction.rst +++ b/Documentation/media/uapi/v4l/libv4l-introduction.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _libv4l-introduction: diff --git a/Documentation/media/uapi/v4l/libv4l.rst b/Documentation/media/uapi/v4l/libv4l.rst index 332c1d42688b..d114fbf1ffa6 100644 --- a/Documentation/media/uapi/v4l/libv4l.rst +++ b/Documentation/media/uapi/v4l/libv4l.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _libv4l: diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst index cf971d5ad9ea..5f956fa784b7 100644 --- a/Documentation/media/uapi/v4l/meta-formats.rst +++ b/Documentation/media/uapi/v4l/meta-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _meta-formats: @@ -12,6 +19,7 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 + pixfmt-meta-intel-ipu3 pixfmt-meta-d4xx pixfmt-meta-uvc pixfmt-meta-vsp1-hgo diff --git a/Documentation/media/uapi/v4l/mmap.rst b/Documentation/media/uapi/v4l/mmap.rst index 670596c1a4f7..c47708bf2c87 100644 --- a/Documentation/media/uapi/v4l/mmap.rst +++ b/Documentation/media/uapi/v4l/mmap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _mmap: @@ -231,17 +238,17 @@ up the output is started with :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`. In the write loop, when the application runs out of free buffers, it must wait until an empty buffer can be dequeued and reused. -To enqueue and dequeue a buffer applications use the :ref:`VIDIOC_QBUF` -and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The status of a buffer -being mapped, enqueued, full or empty can be determined at any time -using the :ref:`VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend -execution of the application until one or more buffers can be dequeued. -By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` blocks when no buffer is -in the outgoing queue. When the ``O_NONBLOCK`` flag was given to the -:ref:`open() <func-open>` function, :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` -returns immediately with an ``EAGAIN`` error code when no buffer is -available. The :ref:`select() <func-select>` or :ref:`poll() -<func-poll>` functions are always available. +To enqueue and dequeue a buffer applications use the +:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` +ioctl. The status of a buffer being mapped, enqueued, full or empty can +be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two +methods exist to suspend execution of the application until one or more +buffers can be dequeued. By default :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` +blocks when no buffer is in the outgoing queue. When the ``O_NONBLOCK`` +flag was given to the :ref:`open() <func-open>` function, +:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` returns immediately with an ``EAGAIN`` +error code when no buffer is available. The :ref:`select() <func-select>` +or :ref:`poll() <func-poll>` functions are always available. To start and stop capturing or output applications call the :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>` and :ref:`VIDIOC_STREAMOFF diff --git a/Documentation/media/uapi/v4l/nv12mt.svg b/Documentation/media/uapi/v4l/nv12mt.svg index 65d05606c04c..067d8fb34ba2 100644 --- a/Documentation/media/uapi/v4l/nv12mt.svg +++ b/Documentation/media/uapi/v4l/nv12mt.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/nv12mt_example.svg b/Documentation/media/uapi/v4l/nv12mt_example.svg index fc51fe8fda8b..70c3200fdb32 100644 --- a/Documentation/media/uapi/v4l/nv12mt_example.svg +++ b/Documentation/media/uapi/v4l/nv12mt_example.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/open.rst b/Documentation/media/uapi/v4l/open.rst index afd116edb40d..42fad5001c5c 100644 --- a/Documentation/media/uapi/v4l/open.rst +++ b/Documentation/media/uapi/v4l/open.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _open: @@ -53,7 +60,7 @@ ranges. These ranges are listed in :ref:`devices`. The creation of character special files (with mknod) is a privileged operation and devices cannot be opened by major and minor number. That -means applications cannot *reliable* scan for loaded or installed +means applications cannot *reliably* scan for loaded or installed drivers. The user must enter a device name, or the application can try the conventional device names. diff --git a/Documentation/media/uapi/v4l/pipeline.dot b/Documentation/media/uapi/v4l/pipeline.dot index 02d7fcf12b26..8c53ce719a14 100644 --- a/Documentation/media/uapi/v4l/pipeline.dot +++ b/Documentation/media/uapi/v4l/pipeline.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB colorscheme=x11 diff --git a/Documentation/media/uapi/v4l/pixfmt-cnf4.rst b/Documentation/media/uapi/v4l/pixfmt-cnf4.rst new file mode 100644 index 000000000000..8f469290c304 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-cnf4.rst @@ -0,0 +1,31 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _V4L2-PIX-FMT-CNF4: + +****************************** +V4L2_PIX_FMT_CNF4 ('CNF4') +****************************** + +Depth sensor confidence information as a 4 bits per pixel packed array + +Description +=========== + +Proprietary format used by Intel RealSense Depth cameras containing depth +confidence information in range 0-15 with 0 indicating that the sensor was +unable to resolve any signal and 15 indicating maximum level of confidence for +the specific sensor (actual error margins might change from sensor to sensor). + +Every two consecutive pixels are packed into a single byte. +Bits 0-3 of byte n refer to confidence value of depth pixel 2*n, +bits 4-7 to confidence value of depth pixel 2*n+1. + +**Bit-packed representation.** + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 64 64 + + * - Y'\ :sub:`01[3:0]`\ (bits 7--4) Y'\ :sub:`00[3:0]`\ (bits 3--0) + - Y'\ :sub:`03[3:0]`\ (bits 7--4) Y'\ :sub:`02[3:0]`\ (bits 3--0) diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst index ba0f6c49d9bf..e4c5e456df59 100644 --- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************** Compressed Formats diff --git a/Documentation/media/uapi/v4l/pixfmt-grey.rst b/Documentation/media/uapi/v4l/pixfmt-grey.rst index dad813819d3e..3a8156164d39 100644 --- a/Documentation/media/uapi/v4l/pixfmt-grey.rst +++ b/Documentation/media/uapi/v4l/pixfmt-grey.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-GREY: diff --git a/Documentation/media/uapi/v4l/pixfmt-indexed.rst b/Documentation/media/uapi/v4l/pixfmt-indexed.rst index 6edac54dad74..4538b425a046 100644 --- a/Documentation/media/uapi/v4l/pixfmt-indexed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-indexed.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-indexed: diff --git a/Documentation/media/uapi/v4l/pixfmt-intro.rst b/Documentation/media/uapi/v4l/pixfmt-intro.rst index 4bc116aa8193..ca0a6e0d8959 100644 --- a/Documentation/media/uapi/v4l/pixfmt-intro.rst +++ b/Documentation/media/uapi/v4l/pixfmt-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ********************** Standard Image Formats diff --git a/Documentation/media/uapi/v4l/pixfmt-inzi.rst b/Documentation/media/uapi/v4l/pixfmt-inzi.rst index 75272f80bc8a..af2940d844ff 100644 --- a/Documentation/media/uapi/v4l/pixfmt-inzi.rst +++ b/Documentation/media/uapi/v4l/pixfmt-inzi.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-INZI: diff --git a/Documentation/media/uapi/v4l/pixfmt-m420.rst b/Documentation/media/uapi/v4l/pixfmt-m420.rst index 6703f4079c3e..c2bae959bf51 100644 --- a/Documentation/media/uapi/v4l/pixfmt-m420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-m420.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-M420: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst index 63bf1a2c9116..862e1f327150 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-d4xx: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst new file mode 100644 index 000000000000..dc871006b41a --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst @@ -0,0 +1,178 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _v4l2-meta-fmt-params: +.. _v4l2-meta-fmt-stat-3a: + +****************************************************************** +V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A ('ip3s') +****************************************************************** + +.. c:type:: ipu3_uapi_stats_3a + +3A statistics +============= + +For IPU3 ImgU, the 3A statistics accelerators collect different statistics over +an input bayer frame. Those statistics, defined in data struct :c:type:`ipu3_uapi_stats_3a`, +are obtained from "ipu3-imgu 3a stat" metadata capture video node, which are then +passed to user space for statistics analysis using :c:type:`v4l2_meta_format` interface. + +The statistics collected are AWB (Auto-white balance) RGBS (Red, Green, Blue and +Saturation measure) cells, AWB filter response, AF (Auto-focus) filter response, +and AE (Auto-exposure) histogram. + +struct :c:type:`ipu3_uapi_4a_config` saves configurable parameters for all above. + +.. code-block:: c + + struct ipu3_uapi_stats_3a { + struct ipu3_uapi_awb_raw_buffer awb_raw_buffer; + struct ipu3_uapi_ae_raw_buffer_aligned ae_raw_buffer[IPU3_UAPI_MAX_STRIPES]; + struct ipu3_uapi_af_raw_buffer af_raw_buffer; + struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer; + struct ipu3_uapi_4a_config stats_4a_config; + __u32 ae_join_buffers; + __u8 padding[28]; + struct ipu3_uapi_stats_3a_bubble_info_per_stripe stats_3a_bubble_per_stripe; + struct ipu3_uapi_ff_status stats_3a_status; + }; + +.. c:type:: ipu3_uapi_params + +Pipeline parameters +=================== + +IPU3 pipeline has a number of image processing stages, each of which takes a +set of parameters as input. The major stages of pipelines are shown here: + +Raw pixels -> Bayer Downscaling -> Optical Black Correction -> + +Linearization -> Lens Shading Correction -> White Balance / Exposure / + +Focus Apply -> Bayer Noise Reduction -> ANR -> Demosaicing -> Color + +Correction Matrix -> Gamma correction -> Color Space Conversion -> + +Chroma Down Scaling -> Chromatic Noise Reduction -> Total Color + +Correction -> XNR3 -> TNR -> DDR + +The table below presents a description of the above algorithms. + +======================== ======================================================= +Name Description +======================== ======================================================= +Optical Black Correction Optical Black Correction block subtracts a pre-defined + value from the respective pixel values to obtain better + image quality. + Defined in :c:type:`ipu3_uapi_obgrid_param`. +Linearization This algo block uses linearization parameters to + address non-linearity sensor effects. The Lookup table + table is defined in + :c:type:`ipu3_uapi_isp_lin_vmem_params`. +SHD Lens shading correction is used to correct spatial + non-uniformity of the pixel response due to optical + lens shading. This is done by applying a different gain + for each pixel. The gain, black level etc are + configured in :c:type:`ipu3_uapi_shd_config_static`. +BNR Bayer noise reduction block removes image noise by + applying a bilateral filter. + See :c:type:`ipu3_uapi_bnr_static_config` for details. +ANR Advanced Noise Reduction is a block based algorithm + that performs noise reduction in the Bayer domain. The + convolution matrix etc can be found in + :c:type:`ipu3_uapi_anr_config`. +Demosaicing Demosaicing converts raw sensor data in Bayer format + into RGB (Red, Green, Blue) presentation. Then add + outputs of estimation of Y channel for following stream + processing by Firmware. The struct is defined as + :c:type:`ipu3_uapi_dm_config`. (TODO) +Color Correction Color Correction algo transforms sensor specific color + space to the standard "sRGB" color space. This is done + by applying 3x3 matrix defined in + :c:type:`ipu3_uapi_ccm_mat_config`. +Gamma correction Gamma correction :c:type:`ipu3_uapi_gamma_config` is a + basic non-linear tone mapping correction that is + applied per pixel for each pixel component. +CSC Color space conversion transforms each pixel from the + RGB primary presentation to YUV (Y: brightness, + UV: Luminance) presentation. This is done by applying + a 3x3 matrix defined in + :c:type:`ipu3_uapi_csc_mat_config` +CDS Chroma down sampling + After the CSC is performed, the Chroma Down Sampling + is applied for a UV plane down sampling by a factor + of 2 in each direction for YUV 4:2:0 using a 4x2 + configurable filter :c:type:`ipu3_uapi_cds_params`. +CHNR Chroma noise reduction + This block processes only the chrominance pixels and + performs noise reduction by cleaning the high + frequency noise. + See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`. +TCC Total color correction as defined in struct + :c:type:`ipu3_uapi_yuvp2_tcc_static_config`. +XNR3 eXtreme Noise Reduction V3 is the third revision of + noise reduction algorithm used to improve image + quality. This removes the low frequency noise in the + captured image. Two related structs are being defined, + :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data memory + and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for vector + memory. +TNR Temporal Noise Reduction block compares successive + frames in time to remove anomalies / noise in pixel + values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params` and + :c:type:`ipu3_uapi_isp_tnr3_params` are defined for ISP + vector and data memory respectively. +======================== ======================================================= + +A few stages of the pipeline will be executed by firmware running on the ISP +processor, while many others will use a set of fixed hardware blocks also +called accelerator cluster (ACC) to crunch pixel data and produce statistics. + +ACC parameters of individual algorithms, as defined by +:c:type:`ipu3_uapi_acc_param`, can be chosen to be applied by the user +space through struct :c:type:`ipu3_uapi_flags` embedded in +:c:type:`ipu3_uapi_params` structure. For parameters that are configured as +not enabled by the user space, the corresponding structs are ignored by the +driver, in which case the existing configuration of the algorithm will be +preserved. + +Both 3A statistics and pipeline parameters described here are closely tied to +the underlying camera sub-system (CSS) APIs. They are usually consumed and +produced by dedicated user space libraries that comprise the important tuning +tools, thus freeing the developers from being bothered with the low level +hardware and algorithm details. + +It should be noted that IPU3 DMA operations require the addresses of all data +structures (that includes both input and output) to be aligned on 32 byte +boundaries. + +The meta data :c:type:`ipu3_uapi_params` will be sent to "ipu3-imgu parameters" +video node in ``V4L2_BUF_TYPE_META_CAPTURE`` format. + +.. code-block:: c + + struct ipu3_uapi_params { + /* Flags which of the settings below are to be applied */ + struct ipu3_uapi_flags use; + + /* Accelerator cluster parameters */ + struct ipu3_uapi_acc_param acc_param; + + /* ISP vector address space parameters */ + struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params; + struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params; + struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params; + + /* ISP data memory (DMEM) parameters */ + struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params; + struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params; + + /* Optical black level compensation */ + struct ipu3_uapi_obgrid_param obgrid_param; + }; + +Intel IPU3 ImgU uAPI data types +=============================== + +.. kernel-doc:: drivers/staging/media/ipu3/include/intel-ipu3.h diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst b/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst index b5165dc090c2..481e4e0e6e1d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-uvc.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-uvc: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst index 67796594fd48..f7a861696281 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgo.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-vsp1-hgo: diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst index fb9f79466319..2ebccdcca95d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst +++ b/Documentation/media/uapi/v4l/pixfmt-meta-vsp1-hgt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-meta-fmt-vsp1-hgt: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12.rst b/Documentation/media/uapi/v4l/pixfmt-nv12.rst index 2776b41377d5..b8c021b07fd2 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12: .. _V4L2-PIX-FMT-NV21: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst index c1a2779f604c..9b2c5c21280a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12M: .. _v4l2-pix-fmt-nv12mt-16x16: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst b/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst index 172a3825604e..2092725de33c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv12mt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV12MT: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16.rst b/Documentation/media/uapi/v4l/pixfmt-nv16.rst index f0fdad3006cf..5ec4b7fa8f04 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV16: .. _V4L2-PIX-FMT-NV61: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst index c45f036763e7..4a63bcf18b70 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv16m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv16m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV16M: .. _v4l2-pix-fmt-nv61m: diff --git a/Documentation/media/uapi/v4l/pixfmt-nv24.rst b/Documentation/media/uapi/v4l/pixfmt-nv24.rst index bda973e86227..13fc6fe1a3d6 100644 --- a/Documentation/media/uapi/v4l/pixfmt-nv24.rst +++ b/Documentation/media/uapi/v4l/pixfmt-nv24.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-NV24: .. _V4L2-PIX-FMT-NV42: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst index 8edf65c80660..38b1895a509f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-hsv: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst index 4938d9655a41..6b3781c04dd5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-rgb: diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst index d7644b411ccc..f53e8f57a003 100644 --- a/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-packed-yuv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _packed-yuv: diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index 0c399858bda2..b2cd155e691b 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-reserved: diff --git a/Documentation/media/uapi/v4l/pixfmt-rgb.rst b/Documentation/media/uapi/v4l/pixfmt-rgb.rst index 1f9a7e3a07c9..48ab80024835 100644 --- a/Documentation/media/uapi/v4l/pixfmt-rgb.rst +++ b/Documentation/media/uapi/v4l/pixfmt-rgb.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt-rgb: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst index 179894f6f8fb..e7a89fe7e117 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cs08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-sdr-fmt-cs8: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst index 5cf7d387447c..d10d56f0e63a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cs14le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-CS14LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst index fd915b7629b7..f37df90f5a21 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cu08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-sdr-fmt-cu8: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst index 8922f5b35457..237998fb5f9f 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-cu16le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-CU16LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst index 2de1b1a0f517..df078dcfd18d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu16be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-PCU16BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst index da8b26bf6b95..a1ea63db9230 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu18be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-PCU18BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst index 5499eed39477..11a05ea60e26 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-pcu20be.rst @@ -1,4 +1,12 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections + .. _V4L2-SDR-FMT-PCU20BE: ****************************** diff --git a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst b/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst index 5e383382802f..3c2c9f75fc5e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst +++ b/Documentation/media/uapi/v4l/pixfmt-sdr-ru12le.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-SDR-FMT-RU12LE: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst index 99cde5077519..75279f0fdad8 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10-ipu3.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-pix-fmt-ipu3-sbggr10: .. _v4l2-pix-fmt-ipu3-sgbrg10: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10.rst index af2538ce34e5..cab7fbb1f2fe 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB10: .. _v4l2-pix-fmt-sbggr10: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst index c44e093514de..5bb58764b532 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10alaw8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SBGGR10ALAW8: .. _v4l2-pix-fmt-sgbrg10alaw8: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst index 5e041d02eff0..cbc9c0a52ab4 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10dpcm8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SBGGR10DPCM8: .. _v4l2-pix-fmt-sgbrg10dpcm8: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst index d9e07a4b8b31..cdb70ac26126 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb10p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB10P: .. _v4l2-pix-fmt-sbggr10p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12.rst index 15041e568a0a..6fb6a937e6ad 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB12: .. _v4l2-pix-fmt-sbggr12: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst index 59918a7913fe..01413be12916 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB12P: .. _v4l2-pix-fmt-sbggr12p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst index 88d20c0e4282..b583531c2853 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB14P: .. _v4l2-pix-fmt-sbggr14p: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst b/Documentation/media/uapi/v4l/pixfmt-srggb16.rst index d407b2b2050f..36527c49eaf7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB16: .. _v4l2-pix-fmt-sbggr16: diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst b/Documentation/media/uapi/v4l/pixfmt-srggb8.rst index 5ac25a634d30..f5233c1e2314 100644 --- a/Documentation/media/uapi/v4l/pixfmt-srggb8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-srggb8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-SRGGB8: .. _v4l2-pix-fmt-sbggr8: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst index 07834cd1249e..b7d3d6ccebc5 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-td08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-DELTA-TD08: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst index 29ebcf40a989..4031b175257c 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-DELTA-TD16: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst index e7fb7ddd191b..2d447475aaa7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu08.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-TU08: diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst index 1588fcc3f1e7..8278543be99a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-TCH-FMT-TU16: diff --git a/Documentation/media/uapi/v4l/pixfmt-uv8.rst b/Documentation/media/uapi/v4l/pixfmt-uv8.rst index c449231b51bb..6008c898305d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-uv8.rst +++ b/Documentation/media/uapi/v4l/pixfmt-uv8.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-UV8: diff --git a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst index ecdc2d94c209..72da2639d37e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-uyvy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-uyvy.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-UYVY: diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst index ef52f637d8e9..7f82dad9013a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************************** Multi-planar format structures diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst index 826f2305da01..71eebfc6d853 100644 --- a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst +++ b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ****************************** Single-planar format structure diff --git a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst index 670c339c1714..39b99707cd99 100644 --- a/Documentation/media/uapi/v4l/pixfmt-vyuy.rst +++ b/Documentation/media/uapi/v4l/pixfmt-vyuy.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-VYUY: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10.rst b/Documentation/media/uapi/v4l/pixfmt-y10.rst index 89e22899cd81..63277686764a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10b.rst b/Documentation/media/uapi/v4l/pixfmt-y10b.rst index 9feddf3ae07b..49c4dd432413 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10b.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10b.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10BPACK: diff --git a/Documentation/media/uapi/v4l/pixfmt-y10p.rst b/Documentation/media/uapi/v4l/pixfmt-y10p.rst index 13b571306915..7893642faee3 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y10p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y10p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y10P: diff --git a/Documentation/media/uapi/v4l/pixfmt-y12.rst b/Documentation/media/uapi/v4l/pixfmt-y12.rst index 0f230713290b..33a943b4996a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y12.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y12.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y12: diff --git a/Documentation/media/uapi/v4l/pixfmt-y12i.rst b/Documentation/media/uapi/v4l/pixfmt-y12i.rst index bb39a2463564..1d4a14e1ec6e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y12i.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y12i.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y12I: diff --git a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst b/Documentation/media/uapi/v4l/pixfmt-y16-be.rst index 54ce35ef84b7..1e72bfe2d557 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y16-be.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y16-be.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y16-BE: diff --git a/Documentation/media/uapi/v4l/pixfmt-y16.rst b/Documentation/media/uapi/v4l/pixfmt-y16.rst index bcbd52de3aca..f77d900db131 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y16: diff --git a/Documentation/media/uapi/v4l/pixfmt-y41p.rst b/Documentation/media/uapi/v4l/pixfmt-y41p.rst index e1fe548807a4..829c68afd8d7 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y41p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y41p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y41P: diff --git a/Documentation/media/uapi/v4l/pixfmt-y8i.rst b/Documentation/media/uapi/v4l/pixfmt-y8i.rst index fd8ed23dd342..2c88ed90522d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-y8i.rst +++ b/Documentation/media/uapi/v4l/pixfmt-y8i.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Y8I: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst index b51a0d1c6108..ebb72a5c7ceb 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv410.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv410.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVU410: .. _v4l2-pix-fmt-yuv410: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst index 2582341972db..83ddaa3f8dfb 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv411p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV411P: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst index a9b85c4b1dbc..f4f6f792a23e 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVU420: .. _V4L2-PIX-FMT-YUV420: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst index 32c68c33f2b1..c29b30c6445a 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv420m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV420M: .. _v4l2-pix-fmt-yvu420m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst index 9e7028c4967c..737fd94a9ae9 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV422M: .. _v4l2-pix-fmt-yvu422m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst index a96f836c7fa5..7cebb6ebb621 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv422p.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV422P: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst index 8605bfaee112..8f14ca378816 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuv444m.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUV444M: .. _v4l2-pix-fmt-yvu444m: diff --git a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst index 53e876d053fb..d86d7f086c41 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yuyv.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yuyv.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YUYV: diff --git a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst index b9c31746e565..656a830fed02 100644 --- a/Documentation/media/uapi/v4l/pixfmt-yvyu.rst +++ b/Documentation/media/uapi/v4l/pixfmt-yvyu.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-YVYU: diff --git a/Documentation/media/uapi/v4l/pixfmt-z16.rst b/Documentation/media/uapi/v4l/pixfmt-z16.rst index eb713a9bccae..eccf235bf02d 100644 --- a/Documentation/media/uapi/v4l/pixfmt-z16.rst +++ b/Documentation/media/uapi/v4l/pixfmt-z16.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _V4L2-PIX-FMT-Z16: diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst index 2aa449e2da67..29be001796db 100644 --- a/Documentation/media/uapi/v4l/pixfmt.rst +++ b/Documentation/media/uapi/v4l/pixfmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _pixfmt: diff --git a/Documentation/media/uapi/v4l/planar-apis.rst b/Documentation/media/uapi/v4l/planar-apis.rst index 4e059fb44153..a422dc9d592c 100644 --- a/Documentation/media/uapi/v4l/planar-apis.rst +++ b/Documentation/media/uapi/v4l/planar-apis.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _planar-apis: diff --git a/Documentation/media/uapi/v4l/querycap.rst b/Documentation/media/uapi/v4l/querycap.rst index c19cce7a816f..8d01ef52f780 100644 --- a/Documentation/media/uapi/v4l/querycap.rst +++ b/Documentation/media/uapi/v4l/querycap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _querycap: diff --git a/Documentation/media/uapi/v4l/rw.rst b/Documentation/media/uapi/v4l/rw.rst index 91596c0cc2f3..6e498fcf32c4 100644 --- a/Documentation/media/uapi/v4l/rw.rst +++ b/Documentation/media/uapi/v4l/rw.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _rw: diff --git a/Documentation/media/uapi/v4l/sdr-formats.rst b/Documentation/media/uapi/v4l/sdr-formats.rst index 2037f5bad727..f452f5574ebb 100644 --- a/Documentation/media/uapi/v4l/sdr-formats.rst +++ b/Documentation/media/uapi/v4l/sdr-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _sdr-formats: diff --git a/Documentation/media/uapi/v4l/selection-api-configuration.rst b/Documentation/media/uapi/v4l/selection-api-configuration.rst index 0a4ddc2d71db..6e0c98c37067 100644 --- a/Documentation/media/uapi/v4l/selection-api-configuration.rst +++ b/Documentation/media/uapi/v4l/selection-api-configuration.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************* Configuration diff --git a/Documentation/media/uapi/v4l/selection-api-examples.rst b/Documentation/media/uapi/v4l/selection-api-examples.rst index 67e0e9aed9e8..bb288b06cc17 100644 --- a/Documentation/media/uapi/v4l/selection-api-examples.rst +++ b/Documentation/media/uapi/v4l/selection-api-examples.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ******** Examples diff --git a/Documentation/media/uapi/v4l/selection-api-intro.rst b/Documentation/media/uapi/v4l/selection-api-intro.rst index 09ca93f91bf7..0faed02d0226 100644 --- a/Documentation/media/uapi/v4l/selection-api-intro.rst +++ b/Documentation/media/uapi/v4l/selection-api-intro.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ************ Introduction diff --git a/Documentation/media/uapi/v4l/selection-api-targets.rst b/Documentation/media/uapi/v4l/selection-api-targets.rst index bf7e76dfbdf9..83d633bcbd6f 100644 --- a/Documentation/media/uapi/v4l/selection-api-targets.rst +++ b/Documentation/media/uapi/v4l/selection-api-targets.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ***************** Selection targets diff --git a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst index e7455fb1e572..79b3abca341a 100644 --- a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst +++ b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _selection-vs-crop: diff --git a/Documentation/media/uapi/v4l/selection-api.rst b/Documentation/media/uapi/v4l/selection-api.rst index 390233f704a3..5386004e87cf 100644 --- a/Documentation/media/uapi/v4l/selection-api.rst +++ b/Documentation/media/uapi/v4l/selection-api.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _selection-api: diff --git a/Documentation/media/uapi/v4l/selection.svg b/Documentation/media/uapi/v4l/selection.svg index 911062bd2844..59d2bec9b278 100644 --- a/Documentation/media/uapi/v4l/selection.svg +++ b/Documentation/media/uapi/v4l/selection.svg @@ -1,4 +1,31 @@ <?xml version="1.0" encoding="UTF-8"?> +<!-- + This file is dual-licensed: you can use it either under the terms + of the GPL 2.0 or the GFDL 1.1+ license, at your option. Note that this + dual licensing only applies to this file, and not this project as a + whole. + + a) This file is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation version 2 of + the License. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + Or, alternatively, + + b) Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +--> <svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> <defs> <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/> diff --git a/Documentation/media/uapi/v4l/selections-common.rst b/Documentation/media/uapi/v4l/selections-common.rst index 69dbce4e6e47..28b32db280f2 100644 --- a/Documentation/media/uapi/v4l/selections-common.rst +++ b/Documentation/media/uapi/v4l/selections-common.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selections-common: diff --git a/Documentation/media/uapi/v4l/standard.rst b/Documentation/media/uapi/v4l/standard.rst index 75a14895aed7..bf8959b72988 100644 --- a/Documentation/media/uapi/v4l/standard.rst +++ b/Documentation/media/uapi/v4l/standard.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _standard: diff --git a/Documentation/media/uapi/v4l/streaming-par.rst b/Documentation/media/uapi/v4l/streaming-par.rst index f9b93c53f75c..425bd0ff1477 100644 --- a/Documentation/media/uapi/v4l/streaming-par.rst +++ b/Documentation/media/uapi/v4l/streaming-par.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _streaming-par: diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst index 8e73fcfc6900..ff4b2a972fd2 100644 --- a/Documentation/media/uapi/v4l/subdev-formats.rst +++ b/Documentation/media/uapi/v4l/subdev-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-mbus-format: diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg index ee1df49f83e8..59321e09929d 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg index c10d222b9ea9..e739c54fbbfb 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg index 3cb68bf9fc04..401d1456958c 100644 --- a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg +++ b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg @@ -1,4 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" diff --git a/Documentation/media/uapi/v4l/tch-formats.rst b/Documentation/media/uapi/v4l/tch-formats.rst index dbaabf33a5b8..429c1010149d 100644 --- a/Documentation/media/uapi/v4l/tch-formats.rst +++ b/Documentation/media/uapi/v4l/tch-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _tch-formats: diff --git a/Documentation/media/uapi/v4l/tuner.rst b/Documentation/media/uapi/v4l/tuner.rst index ad117b068831..601dc535199c 100644 --- a/Documentation/media/uapi/v4l/tuner.rst +++ b/Documentation/media/uapi/v4l/tuner.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _tuner: @@ -31,7 +38,7 @@ current video or radio input is queried. .. note:: :ref:`VIDIOC_S_TUNER <VIDIOC_G_TUNER>` does not switch the - current tuner, when there is more than one at all. The tuner is solely + current tuner, when there is more than one. The tuner is solely determined by the current video input. Drivers must support both ioctls and set the ``V4L2_CAP_TUNER`` flag in the struct :c:type:`v4l2_capability` returned by the :ref:`VIDIOC_QUERYCAP` ioctl when the @@ -41,7 +48,7 @@ current video or radio input is queried. Modulators ========== -Video output devices can have one or more modulators, uh, modulating a +Video output devices can have one or more modulators, that modulate a video signal for radiation or connection to the antenna input of a TV set or video recorder. Each modulator is associated with one or more video outputs, depending on the number of RF connectors on the diff --git a/Documentation/media/uapi/v4l/user-func.rst b/Documentation/media/uapi/v4l/user-func.rst index 3e0413b83a33..ca0ef21d77fe 100644 --- a/Documentation/media/uapi/v4l/user-func.rst +++ b/Documentation/media/uapi/v4l/user-func.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _user-func: diff --git a/Documentation/media/uapi/v4l/userp.rst b/Documentation/media/uapi/v4l/userp.rst index dc2893a60d65..b19da8655452 100644 --- a/Documentation/media/uapi/v4l/userp.rst +++ b/Documentation/media/uapi/v4l/userp.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _userp: @@ -62,9 +69,9 @@ memory pages at any time between the completion of the DMA and this ioctl. The memory is also unlocked when :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` is called, :ref:`VIDIOC_REQBUFS`, or when the device is closed. -Applications must take care not to free buffers without dequeuing. For -once, the buffers remain locked until further, wasting physical memory. -Second the driver will not be notified when the memory is returned to +Applications must take care not to free buffers without dequeuing. +Firstly, the buffers remain locked for longer, wasting physical memory. +Secondly the driver will not be notified when the memory is returned to the application's free list and subsequently reused for other purposes, possibly completing the requested DMA and overwriting valuable data. @@ -90,7 +97,7 @@ To start and stop capturing or output applications call the .. note:: - ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from + :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` removes all buffers from both queues and unlocks all buffers as a side effect. Since there is no notion of doing anything "now" on a multitasking system, if an application needs to synchronize with another event it should examine diff --git a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst b/Documentation/media/uapi/v4l/v4l2-selection-flags.rst index 1f9a03851d0f..cc8f2a2b7cba 100644 --- a/Documentation/media/uapi/v4l/v4l2-selection-flags.rst +++ b/Documentation/media/uapi/v4l/v4l2-selection-flags.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selection-flags: diff --git a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst index 87433ec76c6b..f74f239b0510 100644 --- a/Documentation/media/uapi/v4l/v4l2-selection-targets.rst +++ b/Documentation/media/uapi/v4l/v4l2-selection-targets.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2-selection-targets: @@ -42,12 +49,7 @@ of the two interfaces they are used. * - ``V4L2_SEL_TGT_NATIVE_SIZE`` - 0x0003 - The native size of the device, e.g. a sensor's pixel array. - ``left`` and ``top`` fields are zero for this target. Setting the - native size will generally only make sense for memory to memory - devices where the software can create a canvas of a given size in - which for example a video frame can be composed. In that case - V4L2_SEL_TGT_NATIVE_SIZE can be used to configure the size of - that canvas. + ``left`` and ``top`` fields are zero for this target. - Yes - Yes * - ``V4L2_SEL_TGT_COMPOSE`` diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst index b89e5621ae69..004ec00db6bd 100644 --- a/Documentation/media/uapi/v4l/v4l2.rst +++ b/Documentation/media/uapi/v4l/v4l2.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. include:: <isonum.txt> .. _v4l2spec: diff --git a/Documentation/media/uapi/v4l/v4l2grab-example.rst b/Documentation/media/uapi/v4l/v4l2grab-example.rst index c240f0513bee..2a0cfd4429c1 100644 --- a/Documentation/media/uapi/v4l/v4l2grab-example.rst +++ b/Documentation/media/uapi/v4l/v4l2grab-example.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _v4l2grab-example: diff --git a/Documentation/media/uapi/v4l/v4l2grab.c.rst b/Documentation/media/uapi/v4l/v4l2grab.c.rst index f0d0ab6abd41..e76c5fb7bd19 100644 --- a/Documentation/media/uapi/v4l/v4l2grab.c.rst +++ b/Documentation/media/uapi/v4l/v4l2grab.c.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections file: media/v4l/v4l2grab.c ========================== diff --git a/Documentation/media/uapi/v4l/vbi_525.svg b/Documentation/media/uapi/v4l/vbi_525.svg index 643aec8d0ba2..6cd5def22b1f 100644 --- a/Documentation/media/uapi/v4l/vbi_525.svg +++ b/Documentation/media/uapi/v4l/vbi_525.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -810,4 +818,4 @@ sodipodi:role="line" y="-3648.6809" x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/vbi_625.svg b/Documentation/media/uapi/v4l/vbi_625.svg index 9b18243c0a06..7aaae5ec4878 100644 --- a/Documentation/media/uapi/v4l/vbi_625.svg +++ b/Documentation/media/uapi/v4l/vbi_625.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -859,4 +867,4 @@ y="-5054.106" sodipodi:role="line" id="tspan4129">24</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/vbi_hsync.svg b/Documentation/media/uapi/v4l/vbi_hsync.svg index e17ff8314e7b..f8e979ada7e3 100644 --- a/Documentation/media/uapi/v4l/vbi_hsync.svg +++ b/Documentation/media/uapi/v4l/vbi_hsync.svg @@ -1,6 +1,14 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<!-- Created with Inkscape (http://www.inkscape.org/) --> +<!-- + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation License, + Version 1.1 or any later version published by the Free Software + Foundation, with no Invariant Sections, no Front-Cover Texts + and no Back-Cover Texts. A copy of the license is included at + Documentation/media/uapi/fdl-appendix.rst. + TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +--> <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" @@ -310,4 +318,4 @@ sodipodi:role="line" y="-395.66284" x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text> -</g></svg>
\ No newline at end of file +</g></svg> diff --git a/Documentation/media/uapi/v4l/video.rst b/Documentation/media/uapi/v4l/video.rst index d2bc06b064ad..69603b5efbb5 100644 --- a/Documentation/media/uapi/v4l/video.rst +++ b/Documentation/media/uapi/v4l/video.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _video: @@ -7,7 +14,7 @@ Video Inputs and Outputs ************************ Video inputs and outputs are physical connectors of a device. These can -be for example RF connectors (antenna/cable), CVBS a.k.a. Composite +be for example: RF connectors (antenna/cable), CVBS a.k.a. Composite Video, S-Video and RGB connectors. Camera sensors are also considered to be a video input. Video and VBI capture devices have inputs. Video and VBI output devices have outputs, at least one each. Radio devices have @@ -19,7 +26,7 @@ outputs applications can enumerate them with the :ref:`VIDIOC_ENUMOUTPUT` ioctl, respectively. The struct :c:type:`v4l2_input` returned by the :ref:`VIDIOC_ENUMINPUT` ioctl also contains signal -:status information applicable when the current video input is queried. +status information applicable when the current video input is queried. The :ref:`VIDIOC_G_INPUT <VIDIOC_G_INPUT>` and :ref:`VIDIOC_G_OUTPUT <VIDIOC_G_OUTPUT>` ioctls return the index of diff --git a/Documentation/media/uapi/v4l/videodev.rst b/Documentation/media/uapi/v4l/videodev.rst index b9ee4672d639..fa3d3398930a 100644 --- a/Documentation/media/uapi/v4l/videodev.rst +++ b/Documentation/media/uapi/v4l/videodev.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _videodev: diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst index eadf6f757fbf..bd08e4f77ae4 100644 --- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_CREATE_BUFS: diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst index 0a7b8287fd38..019d3d3a0e0d 100644 --- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst +++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_CROPCAP: diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst index 7709852282c2..a1cf20181cf1 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-chip-info.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DBG_G_CHIP_INFO: diff --git a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst index f4e8dd5f7889..29e1d4fc4f52 100644 --- a/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst +++ b/Documentation/media/uapi/v4l/vidioc-dbg-g-register.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DBG_G_REGISTER: diff --git a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst index 85c916b0ce07..ccf83b05afa7 100644 --- a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst +++ b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DECODER_CMD: diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst index 04416b6943c0..dea9c0cc00ab 100644 --- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst +++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DQEVENT: diff --git a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst index 63ead6b7a115..e62d45d37072 100644 --- a/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-dv-timings-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_DV_TIMINGS_CAP: diff --git a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst index 5ae8c933b1b9..c313ca8b8cb5 100644 --- a/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst +++ b/Documentation/media/uapi/v4l/vidioc-encoder-cmd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENCODER_CMD: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst index 63dca65f49e4..0b286e19b46b 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst index 019c513df217..822d6730e7d2 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FMT: @@ -64,8 +71,12 @@ one until ``EINVAL`` is returned. are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type`. + ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``, + ``V4L2_BUF_TYPE_VIDEO_OVERLAY``, + ``V4L2_BUF_TYPE_SDR_CAPTURE``, + ``V4L2_BUF_TYPE_SDR_OUTPUT`` and + ``V4L2_BUF_TYPE_META_CAPTURE``. + See :c:type:`v4l2_buf_type`. * - __u32 - ``flags`` - See :ref:`fmtdesc-flags` diff --git a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst index fea7dc3c879d..2c69f26b165d 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-frameintervals.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FRAMEINTERVALS: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst index 6de117f163e0..cf31f548826f 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-framesizes.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FRAMESIZES: diff --git a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst index 195cf45f3c32..0e97c09afe0e 100644 --- a/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst +++ b/Documentation/media/uapi/v4l/vidioc-enum-freq-bands.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUM_FREQ_BANDS: diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst index 8e5193e8696f..ee0c336c8721 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudio.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMAUDIO: diff --git a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst index 6d2b4f6e78b0..3a8882214d62 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumaudioout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMAUDOUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enuminput.rst b/Documentation/media/uapi/v4l/vidioc-enuminput.rst index 0350069a56c5..a0e4c4413121 100644 --- a/Documentation/media/uapi/v4l/vidioc-enuminput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enuminput.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMINPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst index 697dcd186ae3..0fea81f60541 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumoutput.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumoutput.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMOUTPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst b/Documentation/media/uapi/v4l/vidioc-enumstd.rst index 2644a62acd4b..1603b1b3b6e8 100644 --- a/Documentation/media/uapi/v4l/vidioc-enumstd.rst +++ b/Documentation/media/uapi/v4l/vidioc-enumstd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_ENUMSTD: diff --git a/Documentation/media/uapi/v4l/vidioc-expbuf.rst b/Documentation/media/uapi/v4l/vidioc-expbuf.rst index 226e83eb28a9..4bd8cd79754c 100644 --- a/Documentation/media/uapi/v4l/vidioc-expbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-expbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_EXPBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-g-audio.rst b/Documentation/media/uapi/v4l/vidioc-g-audio.rst index 290851f99386..7af4fe478ba4 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audio.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audio.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_AUDIO: diff --git a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst index 1c98af33ee70..c6ea0396a96a 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-audioout.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-audioout.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_AUDOUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst index b95ba6743cbd..1eff59dc5f35 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_CROP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst index 299b9aabbac2..8493b52adbb2 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ctrl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_CTRL: diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index 35cba2c8d459..5712bd48e687 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-g-edid.rst b/Documentation/media/uapi/v4l/vidioc-g-edid.rst index acab90f06e5a..e55b349a0c7e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-edid.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-edid.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_EDID: diff --git a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst index 9dfe64fc21a4..e285a1f14cdf 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-enc-index.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_ENC_INDEX: diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst index d9930fe776cf..13dc1a986249 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_EXT_CTRLS: diff --git a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst index fc73bf0f6052..7b6179627803 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst index 3ead350e099f..e35a9caff652 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FMT: @@ -133,6 +140,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical - Definition of a data format, see :ref:`pixfmt`, used by SDR capture and output devices. * - + - struct :c:type:`v4l2_meta_format` + - ``meta`` + - Definition of a metadata format, see :ref:`meta-formats`, used by + metadata capture devices. + * - - __u8 - ``raw_data``\ [200] - Place holder for future extensions. diff --git a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst index c1cccb144660..cc30bae3dd6e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-frequency.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-frequency.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_FREQUENCY: diff --git a/Documentation/media/uapi/v4l/vidioc-g-input.rst b/Documentation/media/uapi/v4l/vidioc-g-input.rst index 1dcef44eef02..76b7d487466e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-input.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-input.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_INPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst index a1773ea9543e..5480277ab327 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-jpegcomp.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_JPEGCOMP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst index a47b6a15cfbe..2c33a8bdcc47 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-modulator.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-modulator.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_MODULATOR: diff --git a/Documentation/media/uapi/v4l/vidioc-g-output.rst b/Documentation/media/uapi/v4l/vidioc-g-output.rst index 3e0093f66834..69542d78977b 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-output.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-output.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_OUTPUT: diff --git a/Documentation/media/uapi/v4l/vidioc-g-parm.rst b/Documentation/media/uapi/v4l/vidioc-g-parm.rst index e831fa5512f0..0d2593176c90 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-parm.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-parm.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_PARM: @@ -42,6 +49,9 @@ side. This is especially useful when using the :ref:`read() <func-read>` or :ref:`write() <func-write>`, which are not augmented by timestamps or sequence counters, and to avoid unnecessary data copying. +Changing the frame interval shall never change the format. Changing the +format, on the other hand, may change the frame interval. + Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For implications see the section discussing the :ref:`read() <func-read>` function. diff --git a/Documentation/media/uapi/v4l/vidioc-g-priority.rst b/Documentation/media/uapi/v4l/vidioc-g-priority.rst index c28996b4a45c..244b4dbe9df3 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-priority.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-priority.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_PRIORITY: diff --git a/Documentation/media/uapi/v4l/vidioc-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-g-selection.rst index f1d9df029e0d..7d8ef7ac8e27 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-selection.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_SELECTION: diff --git a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst index a9633cae76c5..388b826d44b3 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-sliced-vbi-cap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_SLICED_VBI_CAP: diff --git a/Documentation/media/uapi/v4l/vidioc-g-std.rst b/Documentation/media/uapi/v4l/vidioc-g-std.rst index 8d94f0404df2..e633e42e3910 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-std.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-std.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_STD: diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst index acdd15901a51..82d23b8bd195 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_G_TUNER: diff --git a/Documentation/media/uapi/v4l/vidioc-log-status.rst b/Documentation/media/uapi/v4l/vidioc-log-status.rst index bbeb7b5f516b..16bb5509ad66 100644 --- a/Documentation/media/uapi/v4l/vidioc-log-status.rst +++ b/Documentation/media/uapi/v4l/vidioc-log-status.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_LOG_STATUS: diff --git a/Documentation/media/uapi/v4l/vidioc-overlay.rst b/Documentation/media/uapi/v4l/vidioc-overlay.rst index 1383e3db25fc..fc5a86e8c1f2 100644 --- a/Documentation/media/uapi/v4l/vidioc-overlay.rst +++ b/Documentation/media/uapi/v4l/vidioc-overlay.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_OVERLAY: diff --git a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst index 49f9f4c181de..60986710967b 100644 --- a/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst +++ b/Documentation/media/uapi/v4l/vidioc-prepare-buf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_PREPARE_BUF: diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst index 753b3b5946b1..3259168a7358 100644 --- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst index 6c82eafd28bb..e9b055395382 100644 --- a/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-query-dv-timings.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERY_DV_TIMINGS: diff --git a/Documentation/media/uapi/v4l/vidioc-querybuf.rst b/Documentation/media/uapi/v4l/vidioc-querybuf.rst index dd54747fabc9..7da60b24e8b6 100644 --- a/Documentation/media/uapi/v4l/vidioc-querybuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-querybuf.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYBUF: diff --git a/Documentation/media/uapi/v4l/vidioc-querycap.rst b/Documentation/media/uapi/v4l/vidioc-querycap.rst index 66fb1b3d6e6e..5f9930195d62 100644 --- a/Documentation/media/uapi/v4l/vidioc-querycap.rst +++ b/Documentation/media/uapi/v4l/vidioc-querycap.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYCAP: @@ -251,6 +258,9 @@ specification the ioctl returns an ``EINVAL`` error code. * - ``V4L2_CAP_STREAMING`` - 0x04000000 - The device supports the :ref:`streaming <mmap>` I/O method. + * - ``V4L2_CAP_META_OUTPUT`` + - 0x08000000 + - The device supports the :ref:`metadata` output interface. * - ``V4L2_CAP_TOUCH`` - 0x10000000 - This is a touch device. diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst index 258f5813f281..f824162d0ea9 100644 --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYCTRL: diff --git a/Documentation/media/uapi/v4l/vidioc-querystd.rst b/Documentation/media/uapi/v4l/vidioc-querystd.rst index a8385cc74818..d8cf28274cfc 100644 --- a/Documentation/media/uapi/v4l/vidioc-querystd.rst +++ b/Documentation/media/uapi/v4l/vidioc-querystd.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_QUERYSTD: diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst index d4bbbb0c60e8..d7faef10e39b 100644 --- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_REQBUFS: @@ -59,9 +66,14 @@ When the I/O method is not supported the ioctl returns an ``EINVAL`` error code. Applications can call :ref:`VIDIOC_REQBUFS` again to change the number of -buffers, however this cannot succeed when any buffers are still mapped. -A ``count`` value of zero frees all buffers, after aborting or finishing -any DMA in progress, an implicit +buffers. Note that if any buffers are still mapped or exported via DMABUF, +then :ref:`VIDIOC_REQBUFS` can only succeed if the +``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` capability is set. Otherwise +:ref:`VIDIOC_REQBUFS` will return the ``EBUSY`` error code. +If ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` is set, then these buffers are +orphaned and will be freed when they are unmapped or when the exported DMABUF +fds are closed. A ``count`` value of zero frees or orphans all buffers, after +aborting or finishing any DMA in progress, an implicit :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>`. @@ -112,6 +124,7 @@ any DMA in progress, an implicit .. _V4L2-BUF-CAP-SUPPORTS-USERPTR: .. _V4L2-BUF-CAP-SUPPORTS-DMABUF: .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: +.. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: .. cssclass:: longtable @@ -132,6 +145,11 @@ any DMA in progress, an implicit * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` - 0x00000008 - This buffer type supports :ref:`requests <media-request-api>`. + * - ``V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS`` + - 0x00000010 + - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still + mapped or exported via DMABUF. These orphaned buffers will be freed + when they are unmapped or when the exported DMABUF fds are closed. Return Value ============ diff --git a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst index b318cb8e1df3..4daec97651f2 100644 --- a/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst +++ b/Documentation/media/uapi/v4l/vidioc-s-hw-freq-seek.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_S_HW_FREQ_SEEK: diff --git a/Documentation/media/uapi/v4l/vidioc-streamon.rst b/Documentation/media/uapi/v4l/vidioc-streamon.rst index e851a6961b78..2b5528ec9f89 100644 --- a/Documentation/media/uapi/v4l/vidioc-streamon.rst +++ b/Documentation/media/uapi/v4l/vidioc-streamon.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_STREAMON: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst index 1bfe3865dcc2..6b4bf9ef5606 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst index 33fdc3ac9316..253b128b194e 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-size.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_FRAME_SIZE: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst index 4e4291798e4b..fefe4d7349ee 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-mbus-code.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_ENUM_MBUS_CODE: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst index 69b2ae8e7c15..632ee053accc 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-crop.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_CROP: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst index 81c5d331af9a..472577bd1745 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_FMT: diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst index 5af0a7179941..4b1b4bc78bfe 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-frame-interval.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_FRAME_INTERVAL: @@ -63,6 +70,9 @@ doesn't match the device capabilities. They must instead modify the interval to match what the hardware can provide. The modified interval should be as close as possible to the original request. +Changing the frame interval shall never change the format. Changing the +format, on the other hand, may change the frame interval. + Sub-devices that support the frame interval ioctls should implement them on a single pad only. Their behaviour when supported on multiple pads of the same sub-device is not defined. diff --git a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst index b1d3dbbef42a..fc73d27e6d74 100644 --- a/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst +++ b/Documentation/media/uapi/v4l/vidioc-subdev-g-selection.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBDEV_G_SELECTION: diff --git a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst index b521efa53ceb..a2d3454555ba 100644 --- a/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst +++ b/Documentation/media/uapi/v4l/vidioc-subscribe-event.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _VIDIOC_SUBSCRIBE_EVENT: .. _VIDIOC_UNSUBSCRIBE_EVENT: diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst index 9ab0592d08da..867470e5f9e1 100644 --- a/Documentation/media/uapi/v4l/yuv-formats.rst +++ b/Documentation/media/uapi/v4l/yuv-formats.rst @@ -1,4 +1,11 @@ -.. -*- coding: utf-8; mode: rst -*- +.. Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections .. _yuv-formats: diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst index bb87b7b36a83..aaaadc934e7a 100644 --- a/Documentation/media/v4l-drivers/au0828-cardlist.rst +++ b/Documentation/media/v4l-drivers/au0828-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + AU0828 cards list ================= diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst index 8da27b924e01..f5806856b5a1 100644 --- a/Documentation/media/v4l-drivers/bttv-cardlist.rst +++ b/Documentation/media/v4l-drivers/bttv-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + BTTV cards list =============== diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst index 5f35e2fb5afa..d72a0f8fd267 100644 --- a/Documentation/media/v4l-drivers/bttv.rst +++ b/Documentation/media/v4l-drivers/bttv.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The bttv driver =============== diff --git a/Documentation/media/v4l-drivers/cafe_ccic.rst b/Documentation/media/v4l-drivers/cafe_ccic.rst index 94f0f58ebe37..ff7fbce1342a 100644 --- a/Documentation/media/v4l-drivers/cafe_ccic.rst +++ b/Documentation/media/v4l-drivers/cafe_ccic.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cafe_ccic driver ==================== diff --git a/Documentation/media/v4l-drivers/cardlist.rst b/Documentation/media/v4l-drivers/cardlist.rst index 8a0728d20684..14249f47fbc2 100644 --- a/Documentation/media/v4l-drivers/cardlist.rst +++ b/Documentation/media/v4l-drivers/cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Cards List ========== diff --git a/Documentation/media/v4l-drivers/cpia2.rst b/Documentation/media/v4l-drivers/cpia2.rst index b5125016cfcb..a86baa1c83f1 100644 --- a/Documentation/media/v4l-drivers/cpia2.rst +++ b/Documentation/media/v4l-drivers/cpia2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cpia2 driver ================ diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst index afa03f65b01c..16895a734bae 100644 --- a/Documentation/media/v4l-drivers/cx18.rst +++ b/Documentation/media/v4l-drivers/cx18.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx18 driver =============== diff --git a/Documentation/media/v4l-drivers/cx2341x.rst b/Documentation/media/v4l-drivers/cx2341x.rst index e06d07ebdecd..8ca37deb56b6 100644 --- a/Documentation/media/v4l-drivers/cx2341x.rst +++ b/Documentation/media/v4l-drivers/cx2341x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx2341x driver ================== diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst index 8c24df8e0423..ddff8da98eeb 100644 --- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + cx23885 cards list ================== diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst index 21648b8c2e83..56ee08028106 100644 --- a/Documentation/media/v4l-drivers/cx88-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx88-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + CX88 cards list =============== diff --git a/Documentation/media/v4l-drivers/cx88.rst b/Documentation/media/v4l-drivers/cx88.rst index d8f3a014726a..698c73ea2e36 100644 --- a/Documentation/media/v4l-drivers/cx88.rst +++ b/Documentation/media/v4l-drivers/cx88.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The cx88 driver =============== diff --git a/Documentation/media/v4l-drivers/davinci-vpbe.rst b/Documentation/media/v4l-drivers/davinci-vpbe.rst index b545fe001919..0fde433e5c71 100644 --- a/Documentation/media/v4l-drivers/davinci-vpbe.rst +++ b/Documentation/media/v4l-drivers/davinci-vpbe.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The VPBE V4L2 driver design =========================== diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst index dfe882ca945f..2956cbdc28e0 100644 --- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + EM28xx cards list ================= @@ -233,7 +235,7 @@ EM28xx cards list - em2882 - eb1a:e323 * - 55 - - Terratec Cinnergy Hybrid T USB XS (em2882) + - Terratec Cinergy Hybrid T USB XS (em2882) - em2882 - 0ccd:005e, 0ccd:0042 * - 56 diff --git a/Documentation/media/v4l-drivers/fimc.rst b/Documentation/media/v4l-drivers/fimc.rst index 3adc19bcf039..74585ba48b7f 100644 --- a/Documentation/media/v4l-drivers/fimc.rst +++ b/Documentation/media/v4l-drivers/fimc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Samsung S5P/EXYNOS4 FIMC driver diff --git a/Documentation/media/v4l-drivers/fourcc.rst b/Documentation/media/v4l-drivers/fourcc.rst index 9c82106e8a26..d3482c40da62 100644 --- a/Documentation/media/v4l-drivers/fourcc.rst +++ b/Documentation/media/v4l-drivers/fourcc.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Guidelines for Video4Linux pixel format 4CCs ============================================ diff --git a/Documentation/media/v4l-drivers/gspca-cardlist.rst b/Documentation/media/v4l-drivers/gspca-cardlist.rst index e18d87e80d78..adda933616f1 100644 --- a/Documentation/media/v4l-drivers/gspca-cardlist.rst +++ b/Documentation/media/v4l-drivers/gspca-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The gspca cards list ==================== diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 65d3d15eb159..6922dde4a82b 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + i.MX Video Capture Driver ========================= diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index 679238e786a7..f28570ec9e42 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -1,4 +1,4 @@ -.. -*- coding: utf-8; mode: rst -*- +.. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> @@ -44,6 +44,7 @@ For more details see the file COPYING in the source distribution of Linux. davinci-vpbe fimc imx + ipu3 ivtv max2175 meye diff --git a/Documentation/media/v4l-drivers/ipu3.rst b/Documentation/media/v4l-drivers/ipu3.rst new file mode 100644 index 000000000000..f89b51dafadd --- /dev/null +++ b/Documentation/media/v4l-drivers/ipu3.rst @@ -0,0 +1,369 @@ +.. include:: <isonum.txt> + +=============================================================== +Intel Image Processing Unit 3 (IPU3) Imaging Unit (ImgU) driver +=============================================================== + +Copyright |copy| 2018 Intel Corporation + +Introduction +============ + +This file documents the Intel IPU3 (3rd generation Image Processing Unit) +Imaging Unit drivers located under drivers/media/pci/intel/ipu3 (CIO2) as well +as under drivers/staging/media/ipu3 (ImgU). + +The Intel IPU3 found in certain Kaby Lake (as well as certain Sky Lake) +platforms (U/Y processor lines) is made up of two parts namely the Imaging Unit +(ImgU) and the CIO2 device (MIPI CSI2 receiver). + +The CIO2 device receives the raw Bayer data from the sensors and outputs the +frames in a format that is specific to the IPU3 (for consumption by the IPU3 +ImgU). The CIO2 driver is available as drivers/media/pci/intel/ipu3/ipu3-cio2* +and is enabled through the CONFIG_VIDEO_IPU3_CIO2 config option. + +The Imaging Unit (ImgU) is responsible for processing images captured +by the IPU3 CIO2 device. The ImgU driver sources can be found under +drivers/staging/media/ipu3 directory. The driver is enabled through the +CONFIG_VIDEO_IPU3_IMGU config option. + +The two driver modules are named ipu3_csi2 and ipu3_imgu, respectively. + +The drivers has been tested on Kaby Lake platforms (U/Y processor lines). + +Both of the drivers implement V4L2, Media Controller and V4L2 sub-device +interfaces. The IPU3 CIO2 driver supports camera sensors connected to the CIO2 +MIPI CSI-2 interfaces through V4L2 sub-device sensor drivers. + +CIO2 +==== + +The CIO2 is represented as a single V4L2 subdev, which provides a V4L2 subdev +interface to the user space. There is a video node for each CSI-2 receiver, +with a single media controller interface for the entire device. + +The CIO2 contains four independent capture channel, each with its own MIPI CSI-2 +receiver and DMA engine. Each channel is modelled as a V4L2 sub-device exposed +to userspace as a V4L2 sub-device node and has two pads: + +.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}| + +.. flat-table:: + + * - pad + - direction + - purpose + + * - 0 + - sink + - MIPI CSI-2 input, connected to the sensor subdev + + * - 1 + - source + - Raw video capture, connected to the V4L2 video interface + +The V4L2 video interfaces model the DMA engines. They are exposed to userspace +as V4L2 video device nodes. + +Capturing frames in raw Bayer format +------------------------------------ + +CIO2 MIPI CSI2 receiver is used to capture frames (in packed raw Bayer format) +from the raw sensors connected to the CSI2 ports. The captured frames are used +as input to the ImgU driver. + +Image processing using IPU3 ImgU requires tools such as raw2pnm [#f1]_, and +yavta [#f2]_ due to the following unique requirements and / or features specific +to IPU3. + +-- The IPU3 CSI2 receiver outputs the captured frames from the sensor in packed +raw Bayer format that is specific to IPU3. + +-- Multiple video nodes have to be operated simultaneously. + +Let us take the example of ov5670 sensor connected to CSI2 port 0, for a +2592x1944 image capture. + +Using the media contorller APIs, the ov5670 sensor is configured to send +frames in packed raw Bayer format to IPU3 CSI2 receiver. + +# This example assumes /dev/media0 as the CIO2 media device + +export MDEV=/dev/media0 + +# and that ov5670 sensor is connected to i2c bus 10 with address 0x36 + +export SDEV=$(media-ctl -d $MDEV -e "ov5670 10-0036") + +# Establish the link for the media devices using media-ctl [#f3]_ +media-ctl -d $MDEV -l "ov5670:0 -> ipu3-csi2 0:0[1]" + +# Set the format for the media devices +media-ctl -d $MDEV -V "ov5670:0 [fmt:SGRBG10/2592x1944]" + +media-ctl -d $MDEV -V "ipu3-csi2 0:0 [fmt:SGRBG10/2592x1944]" + +media-ctl -d $MDEV -V "ipu3-csi2 0:1 [fmt:SGRBG10/2592x1944]" + +Once the media pipeline is configured, desired sensor specific settings +(such as exposure and gain settings) can be set, using the yavta tool. + +e.g + +yavta -w 0x009e0903 444 $SDEV + +yavta -w 0x009e0913 1024 $SDEV + +yavta -w 0x009e0911 2046 $SDEV + +Once the desired sensor settings are set, frame captures can be done as below. + +e.g + +yavta --data-prefix -u -c10 -n5 -I -s2592x1944 --file=/tmp/frame-#.bin \ + -f IPU3_SGRBG10 $(media-ctl -d $MDEV -e "ipu3-cio2 0") + +With the above command, 10 frames are captured at 2592x1944 resolution, with +sGRBG10 format and output as IPU3_SGRBG10 format. + +The captured frames are available as /tmp/frame-#.bin files. + +ImgU +==== + +The ImgU is represented as two V4L2 subdevs, each of which provides a V4L2 +subdev interface to the user space. + +Each V4L2 subdev represents a pipe, which can support a maximum of 2 streams. +This helps to support advanced camera features like Continuous View Finder (CVF) +and Snapshot During Video(SDV). + +The ImgU contains two independent pipes, each modelled as a V4L2 sub-device +exposed to userspace as a V4L2 sub-device node. + +Each pipe has two sink pads and three source pads for the following purpose: + +.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}| + +.. flat-table:: + + * - pad + - direction + - purpose + + * - 0 + - sink + - Input raw video stream + + * - 1 + - sink + - Processing parameters + + * - 2 + - source + - Output processed video stream + + * - 3 + - source + - Output viewfinder video stream + + * - 4 + - source + - 3A statistics + +Each pad is connected to a corresponding V4L2 video interface, exposed to +userspace as a V4L2 video device node. + +Device operation +---------------- + +With ImgU, once the input video node ("ipu3-imgu 0/1":0, in +<entity>:<pad-number> format) is queued with buffer (in packed raw Bayer +format), ImgU starts processing the buffer and produces the video output in YUV +format and statistics output on respective output nodes. The driver is expected +to have buffers ready for all of parameter, output and statistics nodes, when +input video node is queued with buffer. + +At a minimum, all of input, main output, 3A statistics and viewfinder +video nodes should be enabled for IPU3 to start image processing. + +Each ImgU V4L2 subdev has the following set of video nodes. + +input, output and viewfinder video nodes +---------------------------------------- + +The frames (in packed raw Bayer format specific to the IPU3) received by the +input video node is processed by the IPU3 Imaging Unit and are output to 2 video +nodes, with each targeting a different purpose (main output and viewfinder +output). + +Details onand the Bayer format specific to the IPU3 can be found in +:ref:`v4l2-pix-fmt-ipu3-sbggr10`. + +The driver supports V4L2 Video Capture Interface as defined at :ref:`devices`. + +Only the multi-planar API is supported. More details can be found at +:ref:`planar-apis`. + +Parameters video node +--------------------- + +The parameters video node receives the ImgU algorithm parameters that are used +to configure how the ImgU algorithms process the image. + +Details on processing parameters specific to the IPU3 can be found in +:ref:`v4l2-meta-fmt-params`. + +3A statistics video node +------------------------ + +3A statistics video node is used by the ImgU driver to output the 3A (auto +focus, auto exposure and auto white balance) statistics for the frames that are +being processed by the ImgU to user space applications. User space applications +can use this statistics data to compute the desired algorithm parameters for +the ImgU. + +Configuring the Intel IPU3 +========================== + +The IPU3 ImgU pipelines can be configured using the Media Controller, defined at +:ref:`media_controller`. + +Firmware binary selection +------------------------- + +The firmware binary is selected using the V4L2_CID_INTEL_IPU3_MODE, currently +defined in drivers/staging/media/ipu3/include/intel-ipu3.h . "VIDEO" and "STILL" +modes are available. + +Processing the image in raw Bayer format +---------------------------------------- + +Configuring ImgU V4L2 subdev for image processing +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The ImgU V4L2 subdevs have to be configured with media controller APIs to have +all the video nodes setup correctly. + +Let us take "ipu3-imgu 0" subdev as an example. + +media-ctl -d $MDEV -r + +media-ctl -d $MDEV -l "ipu3-imgu 0 input":0 -> "ipu3-imgu 0":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":2 -> "ipu3-imgu 0 output":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":3 -> "ipu3-imgu 0 viewfinder":0[1] + +media-ctl -d $MDEV -l "ipu3-imgu 0":4 -> "ipu3-imgu 0 3a stat":0[1] + +Also the pipe mode of the corresponding V4L2 subdev should be set as desired +(e.g 0 for video mode or 1 for still mode) through the control id 0x009819a1 as +below. + +yavta -w "0x009819A1 1" /dev/v4l-subdev7 + +RAW Bayer frames go through the following ImgU pipeline HW blocks to have the +processed image output to the DDR memory. + +RAW Bayer frame -> Input Feeder -> Bayer Down Scaling (BDS) -> Geometric +Distortion Correction (GDC) -> DDR + +The ImgU V4L2 subdev has to be configured with the supported resolutions in all +the above HW blocks, for a given input resolution. + +For a given supported resolution for an input frame, the Input Feeder, Bayer +Down Scaling and GDC blocks should be configured with the supported resolutions. +This information can be obtained by looking at the following IPU3 ImgU +configuration table. + +https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master + +Under baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/gcss +directory, graph_settings_ov5670.xml can be used as an example. + +The following steps prepare the ImgU pipeline for the image processing. + +1. The ImgU V4L2 subdev data format should be set by using the +VIDIOC_SUBDEV_S_FMT on pad 0, using the GDC width and height obtained above. + +2. The ImgU V4L2 subdev cropping should be set by using the +VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_CROP as the target, +using the input feeder height and width. + +3. The ImgU V4L2 subdev composing should be set by using the +VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_COMPOSE as the target, +using the BDS height and width. + +For the ov5670 example, for an input frame with a resolution of 2592x1944 +(which is input to the ImgU subdev pad 0), the corresponding resolutions +for input feeder, BDS and GDC are 2592x1944, 2592x1944 and 2560x1920 +respectively. + +Once this is done, the received raw Bayer frames can be input to the ImgU +V4L2 subdev as below, using the open source application v4l2n [#f1]_. + +For an image captured with 2592x1944 [#f4]_ resolution, with desired output +resolution as 2560x1920 and viewfinder resolution as 2560x1920, the following +v4l2n command can be used. This helps process the raw Bayer frames and produces +the desired results for the main output image and the viewfinder output, in NV12 +format. + +v4l2n --pipe=4 --load=/tmp/frame-#.bin --open=/dev/video4 +--fmt=type:VIDEO_OUTPUT_MPLANE,width=2592,height=1944,pixelformat=0X47337069 +--reqbufs=type:VIDEO_OUTPUT_MPLANE,count:1 --pipe=1 --output=/tmp/frames.out +--open=/dev/video5 +--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 +--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=2 --output=/tmp/frames.vf +--open=/dev/video6 +--fmt=type:VIDEO_CAPTURE_MPLANE,width=2560,height=1920,pixelformat=NV12 +--reqbufs=type:VIDEO_CAPTURE_MPLANE,count:1 --pipe=3 --open=/dev/video7 +--output=/tmp/frames.3A --fmt=type:META_CAPTURE,? +--reqbufs=count:1,type:META_CAPTURE --pipe=1,2,3,4 --stream=5 + +where /dev/video4, /dev/video5, /dev/video6 and /dev/video7 devices point to +input, output, viewfinder and 3A statistics video nodes respectively. + +Converting the raw Bayer image into YUV domain +---------------------------------------------- + +The processed images after the above step, can be converted to YUV domain +as below. + +Main output frames +~~~~~~~~~~~~~~~~~~ + +raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.out /tmp/frames.out.ppm + +where 2560x1920 is output resolution, NV12 is the video format, followed +by input frame and output PNM file. + +Viewfinder output frames +~~~~~~~~~~~~~~~~~~~~~~~~ + +raw2pnm -x2560 -y1920 -fNV12 /tmp/frames.vf /tmp/frames.vf.ppm + +where 2560x1920 is output resolution, NV12 is the video format, followed +by input frame and output PNM file. + +Example user space code for IPU3 +================================ + +User space code that configures and uses IPU3 is available here. + +https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/master/ + +The source can be located under hal/intel directory. + +References +========== + +.. [#f5] include/uapi/linux/intel-ipu3.h + +.. [#f1] https://github.com/intel/nvt + +.. [#f2] http://git.ideasonboard.org/yavta.git + +.. [#f3] http://git.ideasonboard.org/?p=media-ctl.git;a=summary + +.. [#f4] ImgU limitation requires an additional 16x16 for all input resolutions diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst index 022dca80c2c8..c34a9ebc9ac2 100644 --- a/Documentation/media/v4l-drivers/ivtv-cardlist.rst +++ b/Documentation/media/v4l-drivers/ivtv-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + IVTV cards list =============== diff --git a/Documentation/media/v4l-drivers/ivtv.rst b/Documentation/media/v4l-drivers/ivtv.rst index 3ba464c4f9bf..7b8775d20214 100644 --- a/Documentation/media/v4l-drivers/ivtv.rst +++ b/Documentation/media/v4l-drivers/ivtv.rst @@ -1,3 +1,4 @@ +.. SPDX-License-Identifier: GPL-2.0 The ivtv driver =============== diff --git a/Documentation/media/v4l-drivers/max2175.rst b/Documentation/media/v4l-drivers/max2175.rst index b1a4c89fd869..a5e35059d98d 100644 --- a/Documentation/media/v4l-drivers/max2175.rst +++ b/Documentation/media/v4l-drivers/max2175.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Maxim Integrated MAX2175 RF to bits tuner driver ================================================ diff --git a/Documentation/media/v4l-drivers/meye.rst b/Documentation/media/v4l-drivers/meye.rst index cfaba6021850..a572996cdbf6 100644 --- a/Documentation/media/v4l-drivers/meye.rst +++ b/Documentation/media/v4l-drivers/meye.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> Vaio Picturebook Motion Eye Camera Driver diff --git a/Documentation/media/v4l-drivers/omap3isp.rst b/Documentation/media/v4l-drivers/omap3isp.rst index 336e58feaee2..8974c444e3a1 100644 --- a/Documentation/media/v4l-drivers/omap3isp.rst +++ b/Documentation/media/v4l-drivers/omap3isp.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> OMAP 3 Image Signal Processor (ISP) driver diff --git a/Documentation/media/v4l-drivers/omap4_camera.rst b/Documentation/media/v4l-drivers/omap4_camera.rst index 54b427b28e5f..24db4222d36d 100644 --- a/Documentation/media/v4l-drivers/omap4_camera.rst +++ b/Documentation/media/v4l-drivers/omap4_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + OMAP4 ISS Driver ================ diff --git a/Documentation/media/v4l-drivers/philips.rst b/Documentation/media/v4l-drivers/philips.rst index 4f68947e6a13..e2840be10d08 100644 --- a/Documentation/media/v4l-drivers/philips.rst +++ b/Documentation/media/v4l-drivers/philips.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Philips webcams (pwc driver) ============================ diff --git a/Documentation/media/v4l-drivers/pvrusb2.rst b/Documentation/media/v4l-drivers/pvrusb2.rst index dc0e72d94b1a..83bfaa531ea8 100644 --- a/Documentation/media/v4l-drivers/pvrusb2.rst +++ b/Documentation/media/v4l-drivers/pvrusb2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The pvrusb2 driver ================== diff --git a/Documentation/media/v4l-drivers/pxa_camera.rst b/Documentation/media/v4l-drivers/pxa_camera.rst index 554f91b04e70..e4fbca755e1a 100644 --- a/Documentation/media/v4l-drivers/pxa_camera.rst +++ b/Documentation/media/v4l-drivers/pxa_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + PXA-Camera Host Driver ====================== diff --git a/Documentation/media/v4l-drivers/qcom_camss.rst b/Documentation/media/v4l-drivers/qcom_camss.rst index f27c8df20b2b..6b15385b12b3 100644 --- a/Documentation/media/v4l-drivers/qcom_camss.rst +++ b/Documentation/media/v4l-drivers/qcom_camss.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> Qualcomm Camera Subsystem driver diff --git a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot index de34f0a7afdc..7ed243b41b67 100644 --- a/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot +++ b/Documentation/media/v4l-drivers/qcom_camss_8x96_graph.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] diff --git a/Documentation/media/v4l-drivers/qcom_camss_graph.dot b/Documentation/media/v4l-drivers/qcom_camss_graph.dot index 827fc7112c1e..ef7dca92fd0b 100644 --- a/Documentation/media/v4l-drivers/qcom_camss_graph.dot +++ b/Documentation/media/v4l-drivers/qcom_camss_graph.dot @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + digraph board { rankdir=TB n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green] diff --git a/Documentation/media/v4l-drivers/radiotrack.rst b/Documentation/media/v4l-drivers/radiotrack.rst index 2f6325ebfd16..a85cb6205db8 100644 --- a/Documentation/media/v4l-drivers/radiotrack.rst +++ b/Documentation/media/v4l-drivers/radiotrack.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Radiotrack radio driver =========================== diff --git a/Documentation/media/v4l-drivers/rcar-fdp1.rst b/Documentation/media/v4l-drivers/rcar-fdp1.rst index a59b1e8e3e9c..88b0edcf9046 100644 --- a/Documentation/media/v4l-drivers/rcar-fdp1.rst +++ b/Documentation/media/v4l-drivers/rcar-fdp1.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Renesas R-Car Fine Display Processor (FDP1) Driver ================================================== diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst index 6e4c35cbaabf..afb0e2fb52b0 100644 --- a/Documentation/media/v4l-drivers/saa7134-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7134-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + SAA7134 cards list ================== diff --git a/Documentation/media/v4l-drivers/saa7134.rst b/Documentation/media/v4l-drivers/saa7134.rst index 36b2ee9e0fdc..15d06facdbc1 100644 --- a/Documentation/media/v4l-drivers/saa7134.rst +++ b/Documentation/media/v4l-drivers/saa7134.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The saa7134 driver ================== diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst index e28382ba82e6..e8f36e084537 100644 --- a/Documentation/media/v4l-drivers/saa7164-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7164-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + SAA7164 cards list ================== diff --git a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst index e40ffea7708c..822fcb8368ae 100644 --- a/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst +++ b/Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver ======================================================================= @@ -114,7 +116,7 @@ window: S_CROP ------ -The API at http://v4l2spec.bytesex.org/spec/x1904.htm says: +The :ref:`V4L2 crop API <crop-scale>` says: "...specification does not define an origin or units. However by convention drivers should horizontally count unscaled samples relative to 0H." diff --git a/Documentation/media/v4l-drivers/si470x.rst b/Documentation/media/v4l-drivers/si470x.rst index 955d8ca159fe..d53bf5f95200 100644 --- a/Documentation/media/v4l-drivers/si470x.rst +++ b/Documentation/media/v4l-drivers/si470x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Silicon Labs Si470x FM Radio Receivers driver diff --git a/Documentation/media/v4l-drivers/si4713.rst b/Documentation/media/v4l-drivers/si4713.rst index 3022e7cfe9a8..be8e6b49b7b4 100644 --- a/Documentation/media/v4l-drivers/si4713.rst +++ b/Documentation/media/v4l-drivers/si4713.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> The Silicon Labs Si4713 FM Radio Transmitter Driver diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst index 677512566f15..87062301d6a1 100644 --- a/Documentation/media/v4l-drivers/si476x.rst +++ b/Documentation/media/v4l-drivers/si476x.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + .. include:: <isonum.txt> diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst index 79d09e423700..7c39711aebf8 100644 --- a/Documentation/media/v4l-drivers/soc-camera.rst +++ b/Documentation/media/v4l-drivers/soc-camera.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Soc-Camera Drivers ====================== diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst index 6bd083544457..6d2769c0f4d8 100644 --- a/Documentation/media/v4l-drivers/tm6000-cardlist.rst +++ b/Documentation/media/v4l-drivers/tm6000-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + TM6000 cards list ================= diff --git a/Documentation/media/v4l-drivers/tuner-cardlist.rst b/Documentation/media/v4l-drivers/tuner-cardlist.rst index 276dd90e0c59..362617c59c5d 100644 --- a/Documentation/media/v4l-drivers/tuner-cardlist.rst +++ b/Documentation/media/v4l-drivers/tuner-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner cards list ================ diff --git a/Documentation/media/v4l-drivers/tuners.rst b/Documentation/media/v4l-drivers/tuners.rst index c3e8a1cf64a6..7509be888909 100644 --- a/Documentation/media/v4l-drivers/tuners.rst +++ b/Documentation/media/v4l-drivers/tuners.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Tuner drivers ============= diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst index 5a8ffbfc204e..6aee115ee6e2 100644 --- a/Documentation/media/v4l-drivers/usbvision-cardlist.rst +++ b/Documentation/media/v4l-drivers/usbvision-cardlist.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + USBvision cards list ==================== diff --git a/Documentation/media/v4l-drivers/uvcvideo.rst b/Documentation/media/v4l-drivers/uvcvideo.rst index d68b3d59a4b5..e5fd8fad333c 100644 --- a/Documentation/media/v4l-drivers/uvcvideo.rst +++ b/Documentation/media/v4l-drivers/uvcvideo.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Linux USB Video Class (UVC) driver ====================================== diff --git a/Documentation/media/v4l-drivers/v4l-with-ir.rst b/Documentation/media/v4l-drivers/v4l-with-ir.rst index 613e1e79fc96..ce23c8a7bc93 100644 --- a/Documentation/media/v4l-drivers/v4l-with-ir.rst +++ b/Documentation/media/v4l-drivers/v4l-with-ir.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Infrared remote control support in video4linux drivers ====================================================== diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst index 089595ce11c5..edb6f33e029c 100644 --- a/Documentation/media/v4l-drivers/vivid.rst +++ b/Documentation/media/v4l-drivers/vivid.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Virtual Video Test Driver (vivid) ===================================== diff --git a/Documentation/media/v4l-drivers/zoran.rst b/Documentation/media/v4l-drivers/zoran.rst index c3a0f7bc2c7b..d2724a863d1d 100644 --- a/Documentation/media/v4l-drivers/zoran.rst +++ b/Documentation/media/v4l-drivers/zoran.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + The Zoran driver ================ diff --git a/Documentation/media/v4l-drivers/zr364xx.rst b/Documentation/media/v4l-drivers/zr364xx.rst index 3d193f01d8bb..ec8acb3e98fc 100644 --- a/Documentation/media/v4l-drivers/zr364xx.rst +++ b/Documentation/media/v4l-drivers/zr364xx.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Zoran 364xx based USB webcam module =================================== diff --git a/Documentation/media/video.h.rst.exceptions b/Documentation/media/video.h.rst.exceptions index 371cdbd7d062..ea9de59ad8b7 100644 --- a/Documentation/media/video.h.rst.exceptions +++ b/Documentation/media/video.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI_DVBVIDEO_H_ diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions index 1ec425a7c364..64d348e67df9 100644 --- a/Documentation/media/videodev2.h.rst.exceptions +++ b/Documentation/media/videodev2.h.rst.exceptions @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + # Ignore header name ignore define _UAPI__LINUX_VIDEODEV2_H @@ -28,6 +30,7 @@ replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` # Documented enum v4l2_buf_type replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type` @@ -161,6 +164,7 @@ replace define V4L2_CAP_META_CAPTURE device-capabilities replace define V4L2_CAP_READWRITE device-capabilities replace define V4L2_CAP_ASYNCIO device-capabilities replace define V4L2_CAP_STREAMING device-capabilities +replace define V4L2_CAP_META_OUTPUT device-capabilities replace define V4L2_CAP_DEVICE_CAPS device-capabilities replace define V4L2_CAP_TOUCH device-capabilities diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/device_drivers/3com/3c509.txt index fbf722e15ac3..fbf722e15ac3 100644 --- a/Documentation/networking/3c509.txt +++ b/Documentation/networking/device_drivers/3com/3c509.txt diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/device_drivers/3com/vortex.txt index ad3dead052a4..587f3fcfbcae 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/device_drivers/3com/vortex.txt @@ -1,4 +1,4 @@ -Documentation/networking/vortex.txt +Documentation/networking/device_drivers/3com/vortex.txt Andrew Morton 30 April 2000 diff --git a/Documentation/networking/ena.txt b/Documentation/networking/device_drivers/amazon/ena.txt index 2b4b6f57e549..2b4b6f57e549 100644 --- a/Documentation/networking/ena.txt +++ b/Documentation/networking/device_drivers/amazon/ena.txt diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/device_drivers/chelsio/cxgb.txt index 20a887615c4a..20a887615c4a 100644 --- a/Documentation/networking/cxgb.txt +++ b/Documentation/networking/device_drivers/chelsio/cxgb.txt diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/device_drivers/cirrus/cs89x0.txt index 0e190180eec8..0e190180eec8 100644 --- a/Documentation/networking/cs89x0.txt +++ b/Documentation/networking/device_drivers/cirrus/cs89x0.txt diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/device_drivers/davicom/dm9000.txt index 5552e2e575c5..5552e2e575c5 100644 --- a/Documentation/networking/dm9000.txt +++ b/Documentation/networking/device_drivers/davicom/dm9000.txt diff --git a/Documentation/networking/de4x5.txt b/Documentation/networking/device_drivers/dec/de4x5.txt index c8e4ca9b2c3e..c8e4ca9b2c3e 100644 --- a/Documentation/networking/de4x5.txt +++ b/Documentation/networking/device_drivers/dec/de4x5.txt diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/device_drivers/dec/dmfe.txt index 25320bf19c86..25320bf19c86 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/device_drivers/dec/dmfe.txt diff --git a/Documentation/networking/dl2k.txt b/Documentation/networking/device_drivers/dlink/dl2k.txt index cba74f7a3abc..cba74f7a3abc 100644 --- a/Documentation/networking/dl2k.txt +++ b/Documentation/networking/device_drivers/dlink/dl2k.txt diff --git a/Documentation/networking/dpaa.txt b/Documentation/networking/device_drivers/freescale/dpaa.txt index f88194f71c54..f88194f71c54 100644 --- a/Documentation/networking/dpaa.txt +++ b/Documentation/networking/device_drivers/freescale/dpaa.txt diff --git a/Documentation/networking/dpaa2/dpio-driver.rst b/Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst index 13588104161b..a188466b6698 100644 --- a/Documentation/networking/dpaa2/dpio-driver.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst @@ -19,8 +19,8 @@ pool management for network interfaces. This document provides an overview the Linux DPIO driver, its subcomponents, and its APIs. -See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2 -and the general DPAA2 driver architecture in Linux. +See Documentation/networking/device_drivers/freescale/dpaa2/overview.rst for +a general overview of DPAA2 and the general DPAA2 driver architecture in Linux. Driver Overview --------------- diff --git a/Documentation/networking/dpaa2/ethernet-driver.rst b/Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst index 90ec940749e8..cb4c9a0c5a17 100644 --- a/Documentation/networking/dpaa2/ethernet-driver.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst @@ -33,7 +33,7 @@ hardware resources, like queues, do not have a corresponding MC object and are treated as internal resources of other objects. For a more detailed description of the DPAA2 architecture and its object -abstractions see *Documentation/networking/dpaa2/overview.rst*. +abstractions see *Documentation/networking/device_drivers/freescale/dpaa2/overview.rst*. Each Linux net device is built on top of a Datapath Network Interface (DPNI) object and uses Buffer Pools (DPBPs), I/O Portals (DPIOs) and Concentrators diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst index 67bd87fe6c53..67bd87fe6c53 100644 --- a/Documentation/networking/dpaa2/index.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst diff --git a/Documentation/networking/dpaa2/overview.rst b/Documentation/networking/device_drivers/freescale/dpaa2/overview.rst index d638b5a8aadd..d638b5a8aadd 100644 --- a/Documentation/networking/dpaa2/overview.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/overview.rst diff --git a/Documentation/networking/gianfar.txt b/Documentation/networking/device_drivers/freescale/gianfar.txt index ba1daea7f2e4..ba1daea7f2e4 100644 --- a/Documentation/networking/gianfar.txt +++ b/Documentation/networking/device_drivers/freescale/gianfar.txt diff --git a/Documentation/networking/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst index 5e2839b4ec92..5e2839b4ec92 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/device_drivers/intel/e100.rst diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/device_drivers/intel/e1000.rst index 6379d4d20771..6379d4d20771 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/device_drivers/intel/e1000.rst diff --git a/Documentation/networking/e1000e.rst b/Documentation/networking/device_drivers/intel/e1000e.rst index 33554e5416c5..33554e5416c5 100644 --- a/Documentation/networking/e1000e.rst +++ b/Documentation/networking/device_drivers/intel/e1000e.rst diff --git a/Documentation/networking/fm10k.rst b/Documentation/networking/device_drivers/intel/fm10k.rst index bf5e5942f28d..bf5e5942f28d 100644 --- a/Documentation/networking/fm10k.rst +++ b/Documentation/networking/device_drivers/intel/fm10k.rst diff --git a/Documentation/networking/i40e.rst b/Documentation/networking/device_drivers/intel/i40e.rst index 0cc16c525d10..0cc16c525d10 100644 --- a/Documentation/networking/i40e.rst +++ b/Documentation/networking/device_drivers/intel/i40e.rst diff --git a/Documentation/networking/iavf.rst b/Documentation/networking/device_drivers/intel/iavf.rst index f8b42b64eb28..f8b42b64eb28 100644 --- a/Documentation/networking/iavf.rst +++ b/Documentation/networking/device_drivers/intel/iavf.rst diff --git a/Documentation/networking/ice.rst b/Documentation/networking/device_drivers/intel/ice.rst index 4d118b827bbb..4d118b827bbb 100644 --- a/Documentation/networking/ice.rst +++ b/Documentation/networking/device_drivers/intel/ice.rst diff --git a/Documentation/networking/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst index ba16b86d5593..e87a4a72ea2d 100644 --- a/Documentation/networking/igb.rst +++ b/Documentation/networking/device_drivers/intel/igb.rst @@ -177,6 +177,25 @@ rate limit using the IProute2 tool. Download the latest version of the IProute2 tool from Sourceforge if your version does not have all the features you require. +Credit Based Shaper (Qav Mode) +------------------------------ +When enabling the CBS qdisc in the hardware offload mode, traffic shaping using +the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the +Annex L) algorithm will run in the i210 controller, so it's more accurate and +uses less CPU. + +When using offloaded CBS, and the traffic rate obeys the configured rate +(doesn't go above it), CBS should have little to no effect in the latency. + +The offloaded version of the algorithm has some limits, caused by how the idle +slope is expressed in the adapter's registers. It can only represent idle slopes +in 16.38431 kbps units, which means that if a idle slope of 2576kbps is +requested, the controller will be configured to use a idle slope of ~2589 kbps, +because the driver rounds the value up. For more details, see the comments on +:c:func:`igb_config_tx_modes()`. + +NOTE: This feature is exclusive to i210 models. + Support ======= diff --git a/Documentation/networking/igbvf.rst b/Documentation/networking/device_drivers/intel/igbvf.rst index a8a9ffa4f8d3..a8a9ffa4f8d3 100644 --- a/Documentation/networking/igbvf.rst +++ b/Documentation/networking/device_drivers/intel/igbvf.rst diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/device_drivers/intel/ipw2100.txt index 6f85e1d06031..6f85e1d06031 100644 --- a/Documentation/networking/README.ipw2100 +++ b/Documentation/networking/device_drivers/intel/ipw2100.txt diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/device_drivers/intel/ipw2200.txt index b7658bed4906..b7658bed4906 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/device_drivers/intel/ipw2200.txt diff --git a/Documentation/networking/ixgb.rst b/Documentation/networking/device_drivers/intel/ixgb.rst index 8bd80e27843d..8bd80e27843d 100644 --- a/Documentation/networking/ixgb.rst +++ b/Documentation/networking/device_drivers/intel/ixgb.rst diff --git a/Documentation/networking/ixgbe.rst b/Documentation/networking/device_drivers/intel/ixgbe.rst index 725fc697fd8f..86d887a63606 100644 --- a/Documentation/networking/ixgbe.rst +++ b/Documentation/networking/device_drivers/intel/ixgbe.rst @@ -501,6 +501,19 @@ NOTE: This feature can be disabled for a specific Virtual Function (VF):: ip link set <pf dev> vf <vf id> spoofchk {off|on} +IPsec Offload +------------- +The ixgbe driver supports IPsec Hardware Offload. When creating Security +Associations with "ip xfrm ..." the 'offload' tag option can be used to +register the IPsec SA with the driver in order to get higher throughput in +the secure communications. + +The offload is also supported for ixgbe's VFs, but the VF must be set as +'trusted' and the support must be enabled with:: + + ethtool --set-priv-flags eth<x> vf-ipsec on + ip link set eth<x> vf <y> trust on + Known Issues/Troubleshooting ============================ diff --git a/Documentation/networking/ixgbevf.rst b/Documentation/networking/device_drivers/intel/ixgbevf.rst index 56cde6366c2f..56cde6366c2f 100644 --- a/Documentation/networking/ixgbevf.rst +++ b/Documentation/networking/device_drivers/intel/ixgbevf.rst diff --git a/Documentation/networking/netvsc.txt b/Documentation/networking/device_drivers/microsoft/netvsc.txt index 3bfa635bbbd5..3bfa635bbbd5 100644 --- a/Documentation/networking/netvsc.txt +++ b/Documentation/networking/device_drivers/microsoft/netvsc.txt diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/device_drivers/neterion/s2io.txt index 0362a42f7cf4..0362a42f7cf4 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/device_drivers/neterion/s2io.txt diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/device_drivers/neterion/vxge.txt index abfec245f97c..abfec245f97c 100644 --- a/Documentation/networking/vxge.txt +++ b/Documentation/networking/device_drivers/neterion/vxge.txt diff --git a/Documentation/networking/LICENSE.qla3xxx b/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx index 2f2077e34d81..2f2077e34d81 100644 --- a/Documentation/networking/LICENSE.qla3xxx +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic index 2ae3b64983ab..2ae3b64983ab 100644 --- a/Documentation/networking/LICENSE.qlcnic +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qlcnic diff --git a/Documentation/networking/LICENSE.qlge b/Documentation/networking/device_drivers/qlogic/LICENSE.qlge index ce64e4d15b21..ce64e4d15b21 100644 --- a/Documentation/networking/LICENSE.qlge +++ b/Documentation/networking/device_drivers/qlogic/LICENSE.qlge diff --git a/Documentation/networking/rmnet.txt b/Documentation/networking/device_drivers/qualcomm/rmnet.txt index 6b341eaf2062..6b341eaf2062 100644 --- a/Documentation/networking/rmnet.txt +++ b/Documentation/networking/device_drivers/qualcomm/rmnet.txt diff --git a/Documentation/networking/README.sb1000 b/Documentation/networking/device_drivers/sb1000.txt index f92c2aac56a9..f92c2aac56a9 100644 --- a/Documentation/networking/README.sb1000 +++ b/Documentation/networking/device_drivers/sb1000.txt diff --git a/Documentation/networking/smc9.txt b/Documentation/networking/device_drivers/smsc/smc9.txt index d1e15074e43d..d1e15074e43d 100644 --- a/Documentation/networking/smc9.txt +++ b/Documentation/networking/device_drivers/smsc/smc9.txt diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/device_drivers/stmicro/stmmac.txt index 2bb07078f535..2bb07078f535 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/device_drivers/stmicro/stmmac.txt diff --git a/Documentation/networking/ti-cpsw.txt b/Documentation/networking/device_drivers/ti/cpsw.txt index d4d4c0751a09..d4d4c0751a09 100644 --- a/Documentation/networking/ti-cpsw.txt +++ b/Documentation/networking/device_drivers/ti/cpsw.txt diff --git a/Documentation/networking/tlan.txt b/Documentation/networking/device_drivers/ti/tlan.txt index 34550dfcef74..34550dfcef74 100644 --- a/Documentation/networking/tlan.txt +++ b/Documentation/networking/device_drivers/ti/tlan.txt diff --git a/Documentation/networking/spider_net.txt b/Documentation/networking/device_drivers/toshiba/spider_net.txt index b0b75f8463b3..b0b75f8463b3 100644 --- a/Documentation/networking/spider_net.txt +++ b/Documentation/networking/device_drivers/toshiba/spider_net.txt diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt index ae444ffe73ac..2d26434ddcf8 100644 --- a/Documentation/networking/devlink-params.txt +++ b/Documentation/networking/devlink-params.txt @@ -40,3 +40,12 @@ msix_vec_per_pf_min [DEVICE, GENERIC] for the device initialization. Value is same across all physical functions (PFs) in the device. Type: u32 + +fw_load_policy [DEVICE, GENERIC] + Controls the device's firmware loading policy. + Valid values: + * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0) + Load firmware version preferred by the driver. + * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1) + Load firmware currently stored in flash. + Type: u8 diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index bd89dae8d578..6a47629ef8ed 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -31,6 +31,7 @@ Contents: net_failover alias bridge + snmp_counter .. only:: subproject diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 32b21571adfe..acdfb5d2bcaa 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -108,8 +108,8 @@ neigh/default/gc_thresh2 - INTEGER Default: 512 neigh/default/gc_thresh3 - INTEGER - Maximum number of neighbor entries allowed. Increase this - when using large numbers of interfaces and when communicating + Maximum number of non-PERMANENT neighbor entries allowed. Increase + this when using large numbers of interfaces and when communicating with large numbers of directly-connected peers. Default: 1024 @@ -370,6 +370,7 @@ tcp_l3mdev_accept - BOOLEAN derived from the listen socket to be bound to the L3 domain in which the packets originated. Only valid when the kernel was compiled with CONFIG_NET_L3_MASTER_DEV. + Default: 0 (disabled) tcp_low_latency - BOOLEAN This is a legacy option, it has no effect anymore. @@ -758,7 +759,7 @@ tcp_limit_output_bytes - INTEGER flows, for typical pfifo_fast qdiscs. tcp_limit_output_bytes limits the number of bytes on qdisc or device to reduce artificial RTT/cwnd and reduce bufferbloat. - Default: 262144 + Default: 1048576 (16 * 65536) tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended @@ -773,6 +774,7 @@ udp_l3mdev_accept - BOOLEAN being received regardless of the L3 domain in which they originated. Only valid when the kernel was compiled with CONFIG_NET_L3_MASTER_DEV. + Default: 0 (disabled) udp_mem - vector of 3 INTEGERs: min, pressure, max Number of pages allowed for queueing by all UDP sockets. @@ -799,6 +801,16 @@ udp_wmem_min - INTEGER total pages of UDP sockets exceed udp_mem pressure. The unit is byte. Default: 4K +RAW variables: + +raw_l3mdev_accept - BOOLEAN + Enabling this option allows a "global" bound socket to work + across L3 master domains (e.g., VRFs) with packets capable of + being received regardless of the L3 domain in which they + originated. Only valid when the kernel was compiled with + CONFIG_NET_L3_MASTER_DEV. + Default: 1 (enabled) + CIPSOv4 Variables: cipso_cache_enable - BOOLEAN diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt index c4a54c162547..58dd1c1e3c65 100644 --- a/Documentation/networking/netdev-features.txt +++ b/Documentation/networking/netdev-features.txt @@ -115,7 +115,7 @@ set, be it TCPv4 (when NETIF_F_TSO is enabled) or TCPv6 (NETIF_F_TSO6). * Transmit UDP segmentation offload -NETIF_F_GSO_UDP_GSO_L4 accepts a single UDP header with a payload that exceeds +NETIF_F_GSO_UDP_L4 accepts a single UDP header with a payload that exceeds gso_size. On segmentation, it segments the payload on gso_size boundaries and replicates the network and UDP headers (fixing up the last one if less than gso_size). diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 1669dc2419fd..f75c2ce6e136 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -157,7 +157,16 @@ nf_conntrack_udp_timeout - INTEGER (seconds) default 30 nf_conntrack_udp_timeout_stream - INTEGER (seconds) - default 180 + default 120 This extended timeout will be used in case there is an UDP stream detected. + +nf_conntrack_gre_timeout - INTEGER (seconds) + default 30 + +nf_conntrack_gre_timeout_stream - INTEGER (seconds) + default 180 + + This extended timeout will be used in case there is an GRE stream + detected. diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst new file mode 100644 index 000000000000..f8eb77ddbd44 --- /dev/null +++ b/Documentation/networking/snmp_counter.rst @@ -0,0 +1,1190 @@ +=========== +SNMP counter +=========== + +This document explains the meaning of SNMP counters. + +General IPv4 counters +==================== +All layer 4 packets and ICMP packets will change these counters, but +these counters won't be changed by layer 2 packets (such as STP) or +ARP packets. + +* IpInReceives +Defined in `RFC1213 ipInReceives`_ + +.. _RFC1213 ipInReceives: https://tools.ietf.org/html/rfc1213#page-26 + +The number of packets received by the IP layer. It gets increasing at the +beginning of ip_rcv function, always be updated together with +IpExtInOctets. It will be increased even if the packet is dropped +later (e.g. due to the IP header is invalid or the checksum is wrong +and so on). It indicates the number of aggregated segments after +GRO/LRO. + +* IpInDelivers +Defined in `RFC1213 ipInDelivers`_ + +.. _RFC1213 ipInDelivers: https://tools.ietf.org/html/rfc1213#page-28 + +The number of packets delivers to the upper layer protocols. E.g. TCP, UDP, +ICMP and so on. If no one listens on a raw socket, only kernel +supported protocols will be delivered, if someone listens on the raw +socket, all valid IP packets will be delivered. + +* IpOutRequests +Defined in `RFC1213 ipOutRequests`_ + +.. _RFC1213 ipOutRequests: https://tools.ietf.org/html/rfc1213#page-28 + +The number of packets sent via IP layer, for both single cast and +multicast packets, and would always be updated together with +IpExtOutOctets. + +* IpExtInOctets and IpExtOutOctets +They are Linux kernel extensions, no RFC definitions. Please note, +RFC1213 indeed defines ifInOctets and ifOutOctets, but they +are different things. The ifInOctets and ifOutOctets include the MAC +layer header size but IpExtInOctets and IpExtOutOctets don't, they +only include the IP layer header and the IP layer data. + +* IpExtInNoECTPkts, IpExtInECT1Pkts, IpExtInECT0Pkts, IpExtInCEPkts +They indicate the number of four kinds of ECN IP packets, please refer +`Explicit Congestion Notification`_ for more details. + +.. _Explicit Congestion Notification: https://tools.ietf.org/html/rfc3168#page-6 + +These 4 counters calculate how many packets received per ECN +status. They count the real frame number regardless the LRO/GRO. So +for the same packet, you might find that IpInReceives count 1, but +IpExtInNoECTPkts counts 2 or more. + +* IpInHdrErrors +Defined in `RFC1213 ipInHdrErrors`_. It indicates the packet is +dropped due to the IP header error. It might happen in both IP input +and IP forward paths. + +.. _RFC1213 ipInHdrErrors: https://tools.ietf.org/html/rfc1213#page-27 + +* IpInAddrErrors +Defined in `RFC1213 ipInAddrErrors`_. It will be increased in two +scenarios: (1) The IP address is invalid. (2) The destination IP +address is not a local address and IP forwarding is not enabled + +.. _RFC1213 ipInAddrErrors: https://tools.ietf.org/html/rfc1213#page-27 + +* IpExtInNoRoutes +This counter means the packet is dropped when the IP stack receives a +packet and can't find a route for it from the route table. It might +happen when IP forwarding is enabled and the destination IP address is +not a local address and there is no route for the destination IP +address. + +* IpInUnknownProtos +Defined in `RFC1213 ipInUnknownProtos`_. It will be increased if the +layer 4 protocol is unsupported by kernel. If an application is using +raw socket, kernel will always deliver the packet to the raw socket +and this counter won't be increased. + +.. _RFC1213 ipInUnknownProtos: https://tools.ietf.org/html/rfc1213#page-27 + +* IpExtInTruncatedPkts +For IPv4 packet, it means the actual data size is smaller than the +"Total Length" field in the IPv4 header. + +* IpInDiscards +Defined in `RFC1213 ipInDiscards`_. It indicates the packet is dropped +in the IP receiving path and due to kernel internal reasons (e.g. no +enough memory). + +.. _RFC1213 ipInDiscards: https://tools.ietf.org/html/rfc1213#page-28 + +* IpOutDiscards +Defined in `RFC1213 ipOutDiscards`_. It indicates the packet is +dropped in the IP sending path and due to kernel internal reasons. + +.. _RFC1213 ipOutDiscards: https://tools.ietf.org/html/rfc1213#page-28 + +* IpOutNoRoutes +Defined in `RFC1213 ipOutNoRoutes`_. It indicates the packet is +dropped in the IP sending path and no route is found for it. + +.. _RFC1213 ipOutNoRoutes: https://tools.ietf.org/html/rfc1213#page-29 + +ICMP counters +============ +* IcmpInMsgs and IcmpOutMsgs +Defined by `RFC1213 icmpInMsgs`_ and `RFC1213 icmpOutMsgs`_ + +.. _RFC1213 icmpInMsgs: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpOutMsgs: https://tools.ietf.org/html/rfc1213#page-43 + +As mentioned in the RFC1213, these two counters include errors, they +would be increased even if the ICMP packet has an invalid type. The +ICMP output path will check the header of a raw socket, so the +IcmpOutMsgs would still be updated if the IP header is constructed by +a userspace program. + +* ICMP named types +| These counters include most of common ICMP types, they are: +| IcmpInDestUnreachs: `RFC1213 icmpInDestUnreachs`_ +| IcmpInTimeExcds: `RFC1213 icmpInTimeExcds`_ +| IcmpInParmProbs: `RFC1213 icmpInParmProbs`_ +| IcmpInSrcQuenchs: `RFC1213 icmpInSrcQuenchs`_ +| IcmpInRedirects: `RFC1213 icmpInRedirects`_ +| IcmpInEchos: `RFC1213 icmpInEchos`_ +| IcmpInEchoReps: `RFC1213 icmpInEchoReps`_ +| IcmpInTimestamps: `RFC1213 icmpInTimestamps`_ +| IcmpInTimestampReps: `RFC1213 icmpInTimestampReps`_ +| IcmpInAddrMasks: `RFC1213 icmpInAddrMasks`_ +| IcmpInAddrMaskReps: `RFC1213 icmpInAddrMaskReps`_ +| IcmpOutDestUnreachs: `RFC1213 icmpOutDestUnreachs`_ +| IcmpOutTimeExcds: `RFC1213 icmpOutTimeExcds`_ +| IcmpOutParmProbs: `RFC1213 icmpOutParmProbs`_ +| IcmpOutSrcQuenchs: `RFC1213 icmpOutSrcQuenchs`_ +| IcmpOutRedirects: `RFC1213 icmpOutRedirects`_ +| IcmpOutEchos: `RFC1213 icmpOutEchos`_ +| IcmpOutEchoReps: `RFC1213 icmpOutEchoReps`_ +| IcmpOutTimestamps: `RFC1213 icmpOutTimestamps`_ +| IcmpOutTimestampReps: `RFC1213 icmpOutTimestampReps`_ +| IcmpOutAddrMasks: `RFC1213 icmpOutAddrMasks`_ +| IcmpOutAddrMaskReps: `RFC1213 icmpOutAddrMaskReps`_ + +.. _RFC1213 icmpInDestUnreachs: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpInTimeExcds: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpInParmProbs: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInSrcQuenchs: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInRedirects: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInEchos: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInEchoReps: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInTimestamps: https://tools.ietf.org/html/rfc1213#page-42 +.. _RFC1213 icmpInTimestampReps: https://tools.ietf.org/html/rfc1213#page-43 +.. _RFC1213 icmpInAddrMasks: https://tools.ietf.org/html/rfc1213#page-43 +.. _RFC1213 icmpInAddrMaskReps: https://tools.ietf.org/html/rfc1213#page-43 + +.. _RFC1213 icmpOutDestUnreachs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutTimeExcds: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutParmProbs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutSrcQuenchs: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutRedirects: https://tools.ietf.org/html/rfc1213#page-44 +.. _RFC1213 icmpOutEchos: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutEchoReps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutTimestamps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutTimestampReps: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutAddrMasks: https://tools.ietf.org/html/rfc1213#page-45 +.. _RFC1213 icmpOutAddrMaskReps: https://tools.ietf.org/html/rfc1213#page-46 + +Every ICMP type has two counters: 'In' and 'Out'. E.g., for the ICMP +Echo packet, they are IcmpInEchos and IcmpOutEchos. Their meanings are +straightforward. The 'In' counter means kernel receives such a packet +and the 'Out' counter means kernel sends such a packet. + +* ICMP numeric types +They are IcmpMsgInType[N] and IcmpMsgOutType[N], the [N] indicates the +ICMP type number. These counters track all kinds of ICMP packets. The +ICMP type number definition could be found in the `ICMP parameters`_ +document. + +.. _ICMP parameters: https://www.iana.org/assignments/icmp-parameters/icmp-parameters.xhtml + +For example, if the Linux kernel sends an ICMP Echo packet, the +IcmpMsgOutType8 would increase 1. And if kernel gets an ICMP Echo Reply +packet, IcmpMsgInType0 would increase 1. + +* IcmpInCsumErrors +This counter indicates the checksum of the ICMP packet is +wrong. Kernel verifies the checksum after updating the IcmpInMsgs and +before updating IcmpMsgInType[N]. If a packet has bad checksum, the +IcmpInMsgs would be updated but none of IcmpMsgInType[N] would be updated. + +* IcmpInErrors and IcmpOutErrors +Defined by `RFC1213 icmpInErrors`_ and `RFC1213 icmpOutErrors`_ + +.. _RFC1213 icmpInErrors: https://tools.ietf.org/html/rfc1213#page-41 +.. _RFC1213 icmpOutErrors: https://tools.ietf.org/html/rfc1213#page-43 + +When an error occurs in the ICMP packet handler path, these two +counters would be updated. The receiving packet path use IcmpInErrors +and the sending packet path use IcmpOutErrors. When IcmpInCsumErrors +is increased, IcmpInErrors would always be increased too. + +relationship of the ICMP counters +------------------------------- +The sum of IcmpMsgOutType[N] is always equal to IcmpOutMsgs, as they +are updated at the same time. The sum of IcmpMsgInType[N] plus +IcmpInErrors should be equal or larger than IcmpInMsgs. When kernel +receives an ICMP packet, kernel follows below logic: + +1. increase IcmpInMsgs +2. if has any error, update IcmpInErrors and finish the process +3. update IcmpMsgOutType[N] +4. handle the packet depending on the type, if has any error, update + IcmpInErrors and finish the process + +So if all errors occur in step (2), IcmpInMsgs should be equal to the +sum of IcmpMsgOutType[N] plus IcmpInErrors. If all errors occur in +step (4), IcmpInMsgs should be equal to the sum of +IcmpMsgOutType[N]. If the errors occur in both step (2) and step (4), +IcmpInMsgs should be less than the sum of IcmpMsgOutType[N] plus +IcmpInErrors. + +General TCP counters +================== +* TcpInSegs +Defined in `RFC1213 tcpInSegs`_ + +.. _RFC1213 tcpInSegs: https://tools.ietf.org/html/rfc1213#page-48 + +The number of packets received by the TCP layer. As mentioned in +RFC1213, it includes the packets received in error, such as checksum +error, invalid TCP header and so on. Only one error won't be included: +if the layer 2 destination address is not the NIC's layer 2 +address. It might happen if the packet is a multicast or broadcast +packet, or the NIC is in promiscuous mode. In these situations, the +packets would be delivered to the TCP layer, but the TCP layer will discard +these packets before increasing TcpInSegs. The TcpInSegs counter +isn't aware of GRO. So if two packets are merged by GRO, the TcpInSegs +counter would only increase 1. + +* TcpOutSegs +Defined in `RFC1213 tcpOutSegs`_ + +.. _RFC1213 tcpOutSegs: https://tools.ietf.org/html/rfc1213#page-48 + +The number of packets sent by the TCP layer. As mentioned in RFC1213, +it excludes the retransmitted packets. But it includes the SYN, ACK +and RST packets. Doesn't like TcpInSegs, the TcpOutSegs is aware of +GSO, so if a packet would be split to 2 by GSO, TcpOutSegs will +increase 2. + +* TcpActiveOpens +Defined in `RFC1213 tcpActiveOpens`_ + +.. _RFC1213 tcpActiveOpens: https://tools.ietf.org/html/rfc1213#page-47 + +It means the TCP layer sends a SYN, and come into the SYN-SENT +state. Every time TcpActiveOpens increases 1, TcpOutSegs should always +increase 1. + +* TcpPassiveOpens +Defined in `RFC1213 tcpPassiveOpens`_ + +.. _RFC1213 tcpPassiveOpens: https://tools.ietf.org/html/rfc1213#page-47 + +It means the TCP layer receives a SYN, replies a SYN+ACK, come into +the SYN-RCVD state. + +* TcpExtTCPRcvCoalesce +When packets are received by the TCP layer and are not be read by the +application, the TCP layer will try to merge them. This counter +indicate how many packets are merged in such situation. If GRO is +enabled, lots of packets would be merged by GRO, these packets +wouldn't be counted to TcpExtTCPRcvCoalesce. + +* TcpExtTCPAutoCorking +When sending packets, the TCP layer will try to merge small packets to +a bigger one. This counter increase 1 for every packet merged in such +situation. Please refer to the LWN article for more details: +https://lwn.net/Articles/576263/ + +* TcpExtTCPOrigDataSent +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPOrigDataSent: number of outgoing packets with original data (excluding + retransmission but including data-in-SYN). This counter is different from + TcpOutSegs because TcpOutSegs also tracks pure ACKs. TCPOrigDataSent is + more useful to track the TCP retransmission rate. + +* TCPSynRetrans +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPSynRetrans: number of SYN and SYN/ACK retransmits to break down + retransmissions into SYN, fast-retransmits, timeout retransmits, etc. + +* TCPFastOpenActiveFail +This counter is explained by `kernel commit f19c29e3e391`_, I pasted the +explaination below:: + + TCPFastOpenActiveFail: Fast Open attempts (SYN/data) failed because + the remote does not accept it or the attempts timed out. + +.. _kernel commit f19c29e3e391: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f19c29e3e391a66a273e9afebaf01917245148cd + +* TcpExtListenOverflows and TcpExtListenDrops +When kernel receives a SYN from a client, and if the TCP accept queue +is full, kernel will drop the SYN and add 1 to TcpExtListenOverflows. +At the same time kernel will also add 1 to TcpExtListenDrops. When a +TCP socket is in LISTEN state, and kernel need to drop a packet, +kernel would always add 1 to TcpExtListenDrops. So increase +TcpExtListenOverflows would let TcpExtListenDrops increasing at the +same time, but TcpExtListenDrops would also increase without +TcpExtListenOverflows increasing, e.g. a memory allocation fail would +also let TcpExtListenDrops increase. + +Note: The above explanation is based on kernel 4.10 or above version, on +an old kernel, the TCP stack has different behavior when TCP accept +queue is full. On the old kernel, TCP stack won't drop the SYN, it +would complete the 3-way handshake. As the accept queue is full, TCP +stack will keep the socket in the TCP half-open queue. As it is in the +half open queue, TCP stack will send SYN+ACK on an exponential backoff +timer, after client replies ACK, TCP stack checks whether the accept +queue is still full, if it is not full, moves the socket to the accept +queue, if it is full, keeps the socket in the half-open queue, at next +time client replies ACK, this socket will get another chance to move +to the accept queue. + + +TCP Fast Open +============ +When kernel receives a TCP packet, it has two paths to handler the +packet, one is fast path, another is slow path. The comment in kernel +code provides a good explanation of them, I pasted them below:: + + It is split into a fast path and a slow path. The fast path is + disabled when: + + - A zero window was announced from us + - zero window probing + is only handled properly on the slow path. + - Out of order segments arrived. + - Urgent data is expected. + - There is no buffer space left + - Unexpected TCP flags/window values/header lengths are received + (detected by checking the TCP header against pred_flags) + - Data is sent in both directions. The fast path only supports pure senders + or pure receivers (this means either the sequence number or the ack + value must stay constant) + - Unexpected TCP option. + +Kernel will try to use fast path unless any of the above conditions +are satisfied. If the packets are out of order, kernel will handle +them in slow path, which means the performance might be not very +good. Kernel would also come into slow path if the "Delayed ack" is +used, because when using "Delayed ack", the data is sent in both +directions. When the TCP window scale option is not used, kernel will +try to enable fast path immediately when the connection comes into the +established state, but if the TCP window scale option is used, kernel +will disable the fast path at first, and try to enable it after kernel +receives packets. + +* TcpExtTCPPureAcks and TcpExtTCPHPAcks +If a packet set ACK flag and has no data, it is a pure ACK packet, if +kernel handles it in the fast path, TcpExtTCPHPAcks will increase 1, +if kernel handles it in the slow path, TcpExtTCPPureAcks will +increase 1. + +* TcpExtTCPHPHits +If a TCP packet has data (which means it is not a pure ACK packet), +and this packet is handled in the fast path, TcpExtTCPHPHits will +increase 1. + + +TCP abort +======== + + +* TcpExtTCPAbortOnData +It means TCP layer has data in flight, but need to close the +connection. So TCP layer sends a RST to the other side, indicate the +connection is not closed very graceful. An easy way to increase this +counter is using the SO_LINGER option. Please refer to the SO_LINGER +section of the `socket man page`_: + +.. _socket man page: http://man7.org/linux/man-pages/man7/socket.7.html + +By default, when an application closes a connection, the close function +will return immediately and kernel will try to send the in-flight data +async. If you use the SO_LINGER option, set l_onoff to 1, and l_linger +to a positive number, the close function won't return immediately, but +wait for the in-flight data are acked by the other side, the max wait +time is l_linger seconds. If set l_onoff to 1 and set l_linger to 0, +when the application closes a connection, kernel will send a RST +immediately and increase the TcpExtTCPAbortOnData counter. + +* TcpExtTCPAbortOnClose +This counter means the application has unread data in the TCP layer when +the application wants to close the TCP connection. In such a situation, +kernel will send a RST to the other side of the TCP connection. + +* TcpExtTCPAbortOnMemory +When an application closes a TCP connection, kernel still need to track +the connection, let it complete the TCP disconnect process. E.g. an +app calls the close method of a socket, kernel sends fin to the other +side of the connection, then the app has no relationship with the +socket any more, but kernel need to keep the socket, this socket +becomes an orphan socket, kernel waits for the reply of the other side, +and would come to the TIME_WAIT state finally. When kernel has no +enough memory to keep the orphan socket, kernel would send an RST to +the other side, and delete the socket, in such situation, kernel will +increase 1 to the TcpExtTCPAbortOnMemory. Two conditions would trigger +TcpExtTCPAbortOnMemory: + +1. the memory used by the TCP protocol is higher than the third value of +the tcp_mem. Please refer the tcp_mem section in the `TCP man page`_: + +.. _TCP man page: http://man7.org/linux/man-pages/man7/tcp.7.html + +2. the orphan socket count is higher than net.ipv4.tcp_max_orphans + + +* TcpExtTCPAbortOnTimeout +This counter will increase when any of the TCP timers expire. In such +situation, kernel won't send RST, just give up the connection. + +* TcpExtTCPAbortOnLinger +When a TCP connection comes into FIN_WAIT_2 state, instead of waiting +for the fin packet from the other side, kernel could send a RST and +delete the socket immediately. This is not the default behavior of +Linux kernel TCP stack. By configuring the TCP_LINGER2 socket option, +you could let kernel follow this behavior. + +* TcpExtTCPAbortFailed +The kernel TCP layer will send RST if the `RFC2525 2.17 section`_ is +satisfied. If an internal error occurs during this process, +TcpExtTCPAbortFailed will be increased. + +.. _RFC2525 2.17 section: https://tools.ietf.org/html/rfc2525#page-50 + +TCP Hybrid Slow Start +==================== +The Hybrid Slow Start algorithm is an enhancement of the traditional +TCP congestion window Slow Start algorithm. It uses two pieces of +information to detect whether the max bandwidth of the TCP path is +approached. The two pieces of information are ACK train length and +increase in packet delay. For detail information, please refer the +`Hybrid Slow Start paper`_. Either ACK train length or packet delay +hits a specific threshold, the congestion control algorithm will come +into the Congestion Avoidance state. Until v4.20, two congestion +control algorithms are using Hybrid Slow Start, they are cubic (the +default congestion control algorithm) and cdg. Four snmp counters +relate with the Hybrid Slow Start algorithm. + +.. _Hybrid Slow Start paper: https://pdfs.semanticscholar.org/25e9/ef3f03315782c7f1cbcd31b587857adae7d1.pdf + +* TcpExtTCPHystartTrainDetect +How many times the ACK train length threshold is detected + +* TcpExtTCPHystartTrainCwnd +The sum of CWND detected by ACK train length. Dividing this value by +TcpExtTCPHystartTrainDetect is the average CWND which detected by the +ACK train length. + +* TcpExtTCPHystartDelayDetect +How many times the packet delay threshold is detected. + +* TcpExtTCPHystartDelayCwnd +The sum of CWND detected by packet delay. Dividing this value by +TcpExtTCPHystartDelayDetect is the average CWND which detected by the +packet delay. + +TCP retransmission and congestion control +====================================== +The TCP protocol has two retransmission mechanisms: SACK and fast +recovery. They are exclusive with each other. When SACK is enabled, +the kernel TCP stack would use SACK, or kernel would use fast +recovery. The SACK is a TCP option, which is defined in `RFC2018`_, +the fast recovery is defined in `RFC6582`_, which is also called +'Reno'. + +The TCP congestion control is a big and complex topic. To understand +the related snmp counter, we need to know the states of the congestion +control state machine. There are 5 states: Open, Disorder, CWR, +Recovery and Loss. For details about these states, please refer page 5 +and page 6 of this document: +https://pdfs.semanticscholar.org/0e9c/968d09ab2e53e24c4dca5b2d67c7f7140f8e.pdf + +.. _RFC2018: https://tools.ietf.org/html/rfc2018 +.. _RFC6582: https://tools.ietf.org/html/rfc6582 + +* TcpExtTCPRenoRecovery and TcpExtTCPSackRecovery +When the congestion control comes into Recovery state, if sack is +used, TcpExtTCPSackRecovery increases 1, if sack is not used, +TcpExtTCPRenoRecovery increases 1. These two counters mean the TCP +stack begins to retransmit the lost packets. + +* TcpExtTCPSACKReneging +A packet was acknowledged by SACK, but the receiver has dropped this +packet, so the sender needs to retransmit this packet. In this +situation, the sender adds 1 to TcpExtTCPSACKReneging. A receiver +could drop a packet which has been acknowledged by SACK, although it is +unusual, it is allowed by the TCP protocol. The sender doesn't really +know what happened on the receiver side. The sender just waits until +the RTO expires for this packet, then the sender assumes this packet +has been dropped by the receiver. + +* TcpExtTCPRenoReorder +The reorder packet is detected by fast recovery. It would only be used +if SACK is disabled. The fast recovery algorithm detects recorder by +the duplicate ACK number. E.g., if retransmission is triggered, and +the original retransmitted packet is not lost, it is just out of +order, the receiver would acknowledge multiple times, one for the +retransmitted packet, another for the arriving of the original out of +order packet. Thus the sender would find more ACks than its +expectation, and the sender knows out of order occurs. + +* TcpExtTCPTSReorder +The reorder packet is detected when a hole is filled. E.g., assume the +sender sends packet 1,2,3,4,5, and the receiving order is +1,2,4,5,3. When the sender receives the ACK of packet 3 (which will +fill the hole), two conditions will let TcpExtTCPTSReorder increase +1: (1) if the packet 3 is not re-retransmitted yet. (2) if the packet +3 is retransmitted but the timestamp of the packet 3's ACK is earlier +than the retransmission timestamp. + +* TcpExtTCPSACKReorder +The reorder packet detected by SACK. The SACK has two methods to +detect reorder: (1) DSACK is received by the sender. It means the +sender sends the same packet more than one times. And the only reason +is the sender believes an out of order packet is lost so it sends the +packet again. (2) Assume packet 1,2,3,4,5 are sent by the sender, and +the sender has received SACKs for packet 2 and 5, now the sender +receives SACK for packet 4 and the sender doesn't retransmit the +packet yet, the sender would know packet 4 is out of order. The TCP +stack of kernel will increase TcpExtTCPSACKReorder for both of the +above scenarios. + + +DSACK +===== +The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report +duplicate packets to the sender. There are two kinds of +duplications: (1) a packet which has been acknowledged is +duplicate. (2) an out of order packet is duplicate. The TCP stack +counts these two kinds of duplications on both receiver side and +sender side. + +.. _RFC2883 : https://tools.ietf.org/html/rfc2883 + +* TcpExtTCPDSACKOldSent +The TCP stack receives a duplicate packet which has been acked, so it +sends a DSACK to the sender. + +* TcpExtTCPDSACKOfoSent +The TCP stack receives an out of order duplicate packet, so it sends a +DSACK to the sender. + +* TcpExtTCPDSACKRecv +The TCP stack receives a DSACK, which indicate an acknowledged +duplicate packet is received. + +* TcpExtTCPDSACKOfoRecv +The TCP stack receives a DSACK, which indicate an out of order +duplciate packet is received. + +examples +======= + +ping test +-------- +Run the ping command against the public dns server 8.8.8.8:: + + nstatuser@nstat-a:~$ ping 8.8.8.8 -c 1 + PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. + 64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=17.8 ms + + --- 8.8.8.8 ping statistics --- + 1 packets transmitted, 1 received, 0% packet loss, time 0ms + rtt min/avg/max/mdev = 17.875/17.875/17.875/0.000 ms + +The nstayt result:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + IcmpInMsgs 1 0.0 + IcmpInEchoReps 1 0.0 + IcmpOutMsgs 1 0.0 + IcmpOutEchos 1 0.0 + IcmpMsgInType0 1 0.0 + IcmpMsgOutType8 1 0.0 + IpExtInOctets 84 0.0 + IpExtOutOctets 84 0.0 + IpExtInNoECTPkts 1 0.0 + +The Linux server sent an ICMP Echo packet, so IpOutRequests, +IcmpOutMsgs, IcmpOutEchos and IcmpMsgOutType8 were increased 1. The +server got ICMP Echo Reply from 8.8.8.8, so IpInReceives, IcmpInMsgs, +IcmpInEchoReps and IcmpMsgInType0 were increased 1. The ICMP Echo Reply +was passed to the ICMP layer via IP layer, so IpInDelivers was +increased 1. The default ping data size is 48, so an ICMP Echo packet +and its corresponding Echo Reply packet are constructed by: + +* 14 bytes MAC header +* 20 bytes IP header +* 16 bytes ICMP header +* 48 bytes data (default value of the ping command) + +So the IpExtInOctets and IpExtOutOctets are 20+16+48=84. + +tcp 3-way handshake +------------------ +On server side, we run:: + + nstatuser@nstat-b:~$ nc -lknv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +On client side, we run:: + + nstatuser@nstat-a:~$ nc -nv 192.168.122.251 9000 + Connection to 192.168.122.251 9000 port [tcp/*] succeeded! + +The server listened on tcp 9000 port, the client connected to it, they +completed the 3-way handshake. + +On server side, we can find below nstat output:: + + nstatuser@nstat-b:~$ nstat | grep -i tcp + TcpPassiveOpens 1 0.0 + TcpInSegs 2 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPPureAcks 1 0.0 + +On client side, we can find below nstat output:: + + nstatuser@nstat-a:~$ nstat | grep -i tcp + TcpActiveOpens 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 2 0.0 + +When the server received the first SYN, it replied a SYN+ACK, and came into +SYN-RCVD state, so TcpPassiveOpens increased 1. The server received +SYN, sent SYN+ACK, received ACK, so server sent 1 packet, received 2 +packets, TcpInSegs increased 2, TcpOutSegs increased 1. The last ACK +of the 3-way handshake is a pure ACK without data, so +TcpExtTCPPureAcks increased 1. + +When the client sent SYN, the client came into the SYN-SENT state, so +TcpActiveOpens increased 1, the client sent SYN, received SYN+ACK, sent +ACK, so client sent 2 packets, received 1 packet, TcpInSegs increased +1, TcpOutSegs increased 2. + +TCP normal traffic +----------------- +Run nc on server:: + + nstatuser@nstat-b:~$ nc -lkv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +Run nc on client:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + +Input a string in the nc client ('hello' in our example):: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + hello + +The client side nstat output:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPPureAcks 1 0.0 + TcpExtTCPOrigDataSent 1 0.0 + IpExtInOctets 52 0.0 + IpExtOutOctets 58 0.0 + IpExtInNoECTPkts 1 0.0 + +The server side nstat output:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + IpExtInOctets 58 0.0 + IpExtOutOctets 52 0.0 + IpExtInNoECTPkts 1 0.0 + +Input a string in nc client side again ('world' in our exmaple):: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + hello + world + +Client side nstat output:: + + nstatuser@nstat-a:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPHPAcks 1 0.0 + TcpExtTCPOrigDataSent 1 0.0 + IpExtInOctets 52 0.0 + IpExtOutOctets 58 0.0 + IpExtInNoECTPkts 1 0.0 + + +Server side nstat output:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 1 0.0 + IpInDelivers 1 0.0 + IpOutRequests 1 0.0 + TcpInSegs 1 0.0 + TcpOutSegs 1 0.0 + TcpExtTCPHPHits 1 0.0 + IpExtInOctets 58 0.0 + IpExtOutOctets 52 0.0 + IpExtInNoECTPkts 1 0.0 + +Compare the first client-side nstat and the second client-side nstat, +we could find one difference: the first one had a 'TcpExtTCPPureAcks', +but the second one had a 'TcpExtTCPHPAcks'. The first server-side +nstat and the second server-side nstat had a difference too: the +second server-side nstat had a TcpExtTCPHPHits, but the first +server-side nstat didn't have it. The network traffic patterns were +exactly the same: the client sent a packet to the server, the server +replied an ACK. But kernel handled them in different ways. When the +TCP window scale option is not used, kernel will try to enable fast +path immediately when the connection comes into the established state, +but if the TCP window scale option is used, kernel will disable the +fast path at first, and try to enable it after kerenl receives +packets. We could use the 'ss' command to verify whether the window +scale option is used. e.g. run below command on either server or +client:: + + nstatuser@nstat-a:~$ ss -o state established -i '( dport = :9000 or sport = :9000 ) + Netid Recv-Q Send-Q Local Address:Port Peer Address:Port + tcp 0 0 192.168.122.250:40654 192.168.122.251:9000 + ts sack cubic wscale:7,7 rto:204 rtt:0.98/0.49 mss:1448 pmtu:1500 rcvmss:536 advmss:1448 cwnd:10 bytes_acked:1 segs_out:2 segs_in:1 send 118.2Mbps lastsnd:46572 lastrcv:46572 lastack:46572 pacing_rate 236.4Mbps rcv_space:29200 rcv_ssthresh:29200 minrtt:0.98 + +The 'wscale:7,7' means both server and client set the window scale +option to 7. Now we could explain the nstat output in our test: + +In the first nstat output of client side, the client sent a packet, server +reply an ACK, when kernel handled this ACK, the fast path was not +enabled, so the ACK was counted into 'TcpExtTCPPureAcks'. + +In the second nstat output of client side, the client sent a packet again, +and received another ACK from the server, in this time, the fast path is +enabled, and the ACK was qualified for fast path, so it was handled by +the fast path, so this ACK was counted into TcpExtTCPHPAcks. + +In the first nstat output of server side, fast path was not enabled, +so there was no 'TcpExtTCPHPHits'. + +In the second nstat output of server side, the fast path was enabled, +and the packet received from client qualified for fast path, so it +was counted into 'TcpExtTCPHPHits'. + +TcpExtTCPAbortOnClose +-------------------- +On the server side, we run below python script:: + + import socket + import time + + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +This python script listen on 9000 port, but doesn't read anything from +the connection. + +On the client side, we send the string "hello" by nc:: + + nstatuser@nstat-a:~$ echo "hello" | nc nstat-b 9000 + +Then, we come back to the server side, the server has received the "hello" +packet, and the TCP layer has acked this packet, but the application didn't +read it yet. We type Ctrl-C to terminate the server script. Then we +could find TcpExtTCPAbortOnClose increased 1 on the server side:: + + nstatuser@nstat-b:~$ nstat | grep -i abort + TcpExtTCPAbortOnClose 1 0.0 + +If we run tcpdump on the server side, we could find the server sent a +RST after we type Ctrl-C. + +TcpExtTCPAbortOnMemory and TcpExtTCPAbortOnTimeout +----------------------------------------------- +Below is an example which let the orphan socket count be higher than +net.ipv4.tcp_max_orphans. +Change tcp_max_orphans to a smaller value on client:: + + sudo bash -c "echo 10 > /proc/sys/net/ipv4/tcp_max_orphans" + +Client code (create 64 connection to server):: + + nstatuser@nstat-a:~$ cat client_orphan.py + import socket + import time + + server = 'nstat-b' # server address + port = 9000 + + count = 64 + + connection_list = [] + + for i in range(64): + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.connect((server, port)) + connection_list.append(s) + print("connection_count: %d" % len(connection_list)) + + while True: + time.sleep(99999) + +Server code (accept 64 connection from client):: + + nstatuser@nstat-b:~$ cat server_orphan.py + import socket + import time + + port = 9000 + count = 64 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(count) + connection_list = [] + while True: + sock, addr = s.accept() + connection_list.append((sock, addr)) + print("connection_count: %d" % len(connection_list)) + +Run the python scripts on server and client. + +On server:: + + python3 server_orphan.py + +On client:: + + python3 client_orphan.py + +Run iptables on server:: + + sudo iptables -A INPUT -i ens3 -p tcp --destination-port 9000 -j DROP + +Type Ctrl-C on client, stop client_orphan.py. + +Check TcpExtTCPAbortOnMemory on client:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnMemory 54 0.0 + +Check orphane socket count on client:: + + nstatuser@nstat-a:~$ ss -s + Total: 131 (kernel 0) + TCP: 14 (estab 1, closed 0, orphaned 10, synrecv 0, timewait 0/0), ports 0 + + Transport Total IP IPv6 + * 0 - - + RAW 1 0 1 + UDP 1 1 0 + TCP 14 13 1 + INET 16 14 2 + FRAG 0 0 0 + +The explanation of the test: after run server_orphan.py and +client_orphan.py, we set up 64 connections between server and +client. Run the iptables command, the server will drop all packets from +the client, type Ctrl-C on client_orphan.py, the system of the client +would try to close these connections, and before they are closed +gracefully, these connections became orphan sockets. As the iptables +of the server blocked packets from the client, the server won't receive fin +from the client, so all connection on clients would be stuck on FIN_WAIT_1 +stage, so they will keep as orphan sockets until timeout. We have echo +10 to /proc/sys/net/ipv4/tcp_max_orphans, so the client system would +only keep 10 orphan sockets, for all other orphan sockets, the client +system sent RST for them and delete them. We have 64 connections, so +the 'ss -s' command shows the system has 10 orphan sockets, and the +value of TcpExtTCPAbortOnMemory was 54. + +An additional explanation about orphan socket count: You could find the +exactly orphan socket count by the 'ss -s' command, but when kernel +decide whither increases TcpExtTCPAbortOnMemory and sends RST, kernel +doesn't always check the exactly orphan socket count. For increasing +performance, kernel checks an approximate count firstly, if the +approximate count is more than tcp_max_orphans, kernel checks the +exact count again. So if the approximate count is less than +tcp_max_orphans, but exactly count is more than tcp_max_orphans, you +would find TcpExtTCPAbortOnMemory is not increased at all. If +tcp_max_orphans is large enough, it won't occur, but if you decrease +tcp_max_orphans to a small value like our test, you might find this +issue. So in our test, the client set up 64 connections although the +tcp_max_orphans is 10. If the client only set up 11 connections, we +can't find the change of TcpExtTCPAbortOnMemory. + +Continue the previous test, we wait for several minutes. Because of the +iptables on the server blocked the traffic, the server wouldn't receive +fin, and all the client's orphan sockets would timeout on the +FIN_WAIT_1 state finally. So we wait for a few minutes, we could find +10 timeout on the client:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnTimeout 10 0.0 + +TcpExtTCPAbortOnLinger +--------------------- +The server side code:: + + nstatuser@nstat-b:~$ cat server_linger.py + import socket + import time + + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +The client side code:: + + nstatuser@nstat-a:~$ cat client_linger.py + import socket + import struct + + server = 'nstat-b' # server address + port = 9000 + + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.setsockopt(socket.SOL_SOCKET, socket.SO_LINGER, struct.pack('ii', 1, 10)) + s.setsockopt(socket.SOL_TCP, socket.TCP_LINGER2, struct.pack('i', -1)) + s.connect((server, port)) + s.close() + +Run server_linger.py on server:: + + nstatuser@nstat-b:~$ python3 server_linger.py + +Run client_linger.py on client:: + + nstatuser@nstat-a:~$ python3 client_linger.py + +After run client_linger.py, check the output of nstat:: + + nstatuser@nstat-a:~$ nstat | grep -i abort + TcpExtTCPAbortOnLinger 1 0.0 + +TcpExtTCPRcvCoalesce +------------------- +On the server, we run a program which listen on TCP port 9000, but +doesn't read any data:: + + import socket + import time + port = 9000 + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.bind(('0.0.0.0', port)) + s.listen(1) + sock, addr = s.accept() + while True: + time.sleep(9999999) + +Save the above code as server_coalesce.py, and run:: + + python3 server_coalesce.py + +On the client, save below code as client_coalesce.py:: + + import socket + server = 'nstat-b' + port = 9000 + s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s.connect((server, port)) + +Run:: + + nstatuser@nstat-a:~$ python3 -i client_coalesce.py + +We use '-i' to come into the interactive mode, then a packet:: + + >>> s.send(b'foo') + 3 + +Send a packet again:: + + >>> s.send(b'bar') + 3 + +On the server, run nstat:: + + ubuntu@nstat-b:~$ nstat + #kernel + IpInReceives 2 0.0 + IpInDelivers 2 0.0 + IpOutRequests 2 0.0 + TcpInSegs 2 0.0 + TcpOutSegs 2 0.0 + TcpExtTCPRcvCoalesce 1 0.0 + IpExtInOctets 110 0.0 + IpExtOutOctets 104 0.0 + IpExtInNoECTPkts 2 0.0 + +The client sent two packets, server didn't read any data. When +the second packet arrived at server, the first packet was still in +the receiving queue. So the TCP layer merged the two packets, and we +could find the TcpExtTCPRcvCoalesce increased 1. + +TcpExtListenOverflows and TcpExtListenDrops +---------------------------------------- +On server, run the nc command, listen on port 9000:: + + nstatuser@nstat-b:~$ nc -lkv 0.0.0.0 9000 + Listening on [0.0.0.0] (family 0, port 9000) + +On client, run 3 nc commands in different terminals:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + Connection to nstat-b 9000 port [tcp/*] succeeded! + +The nc command only accepts 1 connection, and the accept queue length +is 1. On current linux implementation, set queue length to n means the +actual queue length is n+1. Now we create 3 connections, 1 is accepted +by nc, 2 in accepted queue, so the accept queue is full. + +Before running the 4th nc, we clean the nstat history on the server:: + + nstatuser@nstat-b:~$ nstat -n + +Run the 4th nc on the client:: + + nstatuser@nstat-a:~$ nc -v nstat-b 9000 + +If the nc server is running on kernel 4.10 or higher version, you +won't see the "Connection to ... succeeded!" string, because kernel +will drop the SYN if the accept queue is full. If the nc client is running +on an old kernel, you would see that the connection is succeeded, +because kernel would complete the 3 way handshake and keep the socket +on half open queue. I did the test on kernel 4.15. Below is the nstat +on the server:: + + nstatuser@nstat-b:~$ nstat + #kernel + IpInReceives 4 0.0 + IpInDelivers 4 0.0 + TcpInSegs 4 0.0 + TcpExtListenOverflows 4 0.0 + TcpExtListenDrops 4 0.0 + IpExtInOctets 240 0.0 + IpExtInNoECTPkts 4 0.0 + +Both TcpExtListenOverflows and TcpExtListenDrops were 4. If the time +between the 4th nc and the nstat was longer, the value of +TcpExtListenOverflows and TcpExtListenDrops would be larger, because +the SYN of the 4th nc was dropped, the client was retrying. + +IpInAddrErrors, IpExtInNoRoutes and IpOutNoRoutes +---------------------------------------------- +server A IP address: 192.168.122.250 +server B IP address: 192.168.122.251 +Prepare on server A, add a route to server B:: + + $ sudo ip route add 8.8.8.8/32 via 192.168.122.251 + +Prepare on server B, disable send_redirects for all interfaces:: + + $ sudo sysctl -w net.ipv4.conf.all.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.ens3.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.lo.send_redirects=0 + $ sudo sysctl -w net.ipv4.conf.default.send_redirects=0 + +We want to let sever A send a packet to 8.8.8.8, and route the packet +to server B. When server B receives such packet, it might send a ICMP +Redirect message to server A, set send_redirects to 0 will disable +this behavior. + +First, generate InAddrErrors. On server B, we disable IP forwarding:: + + $ sudo sysctl -w net.ipv4.conf.all.forwarding=0 + +On server A, we send packets to 8.8.8.8:: + + $ nc -v 8.8.8.8 53 + +On server B, we check the output of nstat:: + + $ nstat + #kernel + IpInReceives 3 0.0 + IpInAddrErrors 3 0.0 + IpExtInOctets 180 0.0 + IpExtInNoECTPkts 3 0.0 + +As we have let server A route 8.8.8.8 to server B, and we disabled IP +forwarding on server B, Server A sent packets to server B, then server B +dropped packets and increased IpInAddrErrors. As the nc command would +re-send the SYN packet if it didn't receive a SYN+ACK, we could find +multiple IpInAddrErrors. + +Second, generate IpExtInNoRoutes. On server B, we enable IP +forwarding:: + + $ sudo sysctl -w net.ipv4.conf.all.forwarding=1 + +Check the route table of server B and remove the default route:: + + $ ip route show + default via 192.168.122.1 dev ens3 proto static + 192.168.122.0/24 dev ens3 proto kernel scope link src 192.168.122.251 + $ sudo ip route delete default via 192.168.122.1 dev ens3 proto static + +On server A, we contact 8.8.8.8 again:: + + $ nc -v 8.8.8.8 53 + nc: connect to 8.8.8.8 port 53 (tcp) failed: Network is unreachable + +On server B, run nstat:: + + $ nstat + #kernel + IpInReceives 1 0.0 + IpOutRequests 1 0.0 + IcmpOutMsgs 1 0.0 + IcmpOutDestUnreachs 1 0.0 + IcmpMsgOutType3 1 0.0 + IpExtInNoRoutes 1 0.0 + IpExtInOctets 60 0.0 + IpExtOutOctets 88 0.0 + IpExtInNoECTPkts 1 0.0 + +We enabled IP forwarding on server B, when server B received a packet +which destination IP address is 8.8.8.8, server B will try to forward +this packet. We have deleted the default route, there was no route for +8.8.8.8, so server B increase IpExtInNoRoutes and sent the "ICMP +Destination Unreachable" message to server A. + +Third, generate IpOutNoRoutes. Run ping command on server B:: + + $ ping -c 1 8.8.8.8 + connect: Network is unreachable + +Run nstat on server B:: + + $ nstat + #kernel + IpOutNoRoutes 1 0.0 + +We have deleted the default route on server B. Server B couldn't find +a route for the 8.8.8.8 IP address, so server B increased +IpOutNoRoutes. diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt index 8ff7b4c8f91b..a5f103b083a0 100644 --- a/Documentation/networking/vrf.txt +++ b/Documentation/networking/vrf.txt @@ -103,19 +103,33 @@ VRF device: or to specify the output device using cmsg and IP_PKTINFO. +By default the scope of the port bindings for unbound sockets is +limited to the default VRF. That is, it will not be matched by packets +arriving on interfaces enslaved to an l3mdev and processes may bind to +the same port if they bind to an l3mdev. + TCP & UDP services running in the default VRF context (ie., not bound to any VRF device) can work across all VRF domains by enabling the tcp_l3mdev_accept and udp_l3mdev_accept sysctl options: + sysctl -w net.ipv4.tcp_l3mdev_accept=1 sysctl -w net.ipv4.udp_l3mdev_accept=1 +These options are disabled by default so that a socket in a VRF is only +selected for packets in that VRF. There is a similar option for RAW +sockets, which is enabled by default for reasons of backwards compatibility. +This is so as to specify the output device with cmsg and IP_PKTINFO, but +using a socket not bound to the corresponding VRF. This allows e.g. older ping +implementations to be run with specifying the device but without executing it +in the VRF. This option can be disabled so that packets received in a VRF +context are only handled by a raw socket bound to the VRF, and packets in the +default VRF are only handled by a socket not bound to any VRF: + + sysctl -w net.ipv4.raw_l3mdev_accept=0 + netfilter rules on the VRF device can be used to limit access to services running in the default VRF context as well. -The default VRF does not have limited scope with respect to port bindings. -That is, if a process does a wildcard bind to a port in the default VRF it -owns the port across all VRF domains within the network namespace. - ################################################################################ Using iproute2 for VRFs diff --git a/Documentation/networking/xfrm_device.txt b/Documentation/networking/xfrm_device.txt index 267f55b5f54a..a1c904dc70dc 100644 --- a/Documentation/networking/xfrm_device.txt +++ b/Documentation/networking/xfrm_device.txt @@ -111,9 +111,10 @@ the stack in xfrm_input(). xfrm_state_hold(xs); store the state information into the skb - skb->sp = secpath_dup(skb->sp); - skb->sp->xvec[skb->sp->len++] = xs; - skb->sp->olen++; + sp = secpath_set(skb); + if (!sp) return; + sp->xvec[sp->len++] = xs; + sp->olen++; indicate the success and/or error status of the offload xo = xfrm_offload(skb); diff --git a/Documentation/nvdimm/security.txt b/Documentation/nvdimm/security.txt new file mode 100644 index 000000000000..4c36c05ca98e --- /dev/null +++ b/Documentation/nvdimm/security.txt @@ -0,0 +1,141 @@ +NVDIMM SECURITY +=============== + +1. Introduction +--------------- + +With the introduction of Intel Device Specific Methods (DSM) v1.8 +specification [1], security DSMs are introduced. The spec added the following +security DSMs: "get security state", "set passphrase", "disable passphrase", +"unlock unit", "freeze lock", "secure erase", and "overwrite". A security_ops +data structure has been added to struct dimm in order to support the security +operations and generic APIs are exposed to allow vendor neutral operations. + +2. Sysfs Interface +------------------ +The "security" sysfs attribute is provided in the nvdimm sysfs directory. For +example: +/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/security + +The "show" attribute of that attribute will display the security state for +that DIMM. The following states are available: disabled, unlocked, locked, +frozen, and overwrite. If security is not supported, the sysfs attribute +will not be visible. + +The "store" attribute takes several commands when it is being written to +in order to support some of the security functionalities: +update <old_keyid> <new_keyid> - enable or update passphrase. +disable <keyid> - disable enabled security and remove key. +freeze - freeze changing of security states. +erase <keyid> - delete existing user encryption key. +overwrite <keyid> - wipe the entire nvdimm. +master_update <keyid> <new_keyid> - enable or update master passphrase. +master_erase <keyid> - delete existing user encryption key. + +3. Key Management +----------------- + +The key is associated to the payload by the DIMM id. For example: +# cat /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/nfit/id +8089-a2-1740-00000133 +The DIMM id would be provided along with the key payload (passphrase) to +the kernel. + +The security keys are managed on the basis of a single key per DIMM. The +key "passphrase" is expected to be 32bytes long. This is similar to the ATA +security specification [2]. A key is initially acquired via the request_key() +kernel API call during nvdimm unlock. It is up to the user to make sure that +all the keys are in the kernel user keyring for unlock. + +A nvdimm encrypted-key of format enc32 has the description format of: +nvdimm:<bus-provider-specific-unique-id> + +See file ``Documentation/security/keys/trusted-encrypted.rst`` for creating +encrypted-keys of enc32 format. TPM usage with a master trusted key is +preferred for sealing the encrypted-keys. + +4. Unlocking +------------ +When the DIMMs are being enumerated by the kernel, the kernel will attempt to +retrieve the key from the kernel user keyring. This is the only time +a locked DIMM can be unlocked. Once unlocked, the DIMM will remain unlocked +until reboot. Typically an entity (i.e. shell script) will inject all the +relevant encrypted-keys into the kernel user keyring during the initramfs phase. +This provides the unlock function access to all the related keys that contain +the passphrase for the respective nvdimms. It is also recommended that the +keys are injected before libnvdimm is loaded by modprobe. + +5. Update +--------- +When doing an update, it is expected that the existing key is removed from +the kernel user keyring and reinjected as different (old) key. It's irrelevant +what the key description is for the old key since we are only interested in the +keyid when doing the update operation. It is also expected that the new key +is injected with the description format described from earlier in this +document. The update command written to the sysfs attribute will be with +the format: +update <old keyid> <new keyid> + +If there is no old keyid due to a security enabling, then a 0 should be +passed in. + +6. Freeze +--------- +The freeze operation does not require any keys. The security config can be +frozen by a user with root privelege. + +7. Disable +---------- +The security disable command format is: +disable <keyid> + +An key with the current passphrase payload that is tied to the nvdimm should be +in the kernel user keyring. + +8. Secure Erase +--------------- +The command format for doing a secure erase is: +erase <keyid> + +An key with the current passphrase payload that is tied to the nvdimm should be +in the kernel user keyring. + +9. Overwrite +------------ +The command format for doing an overwrite is: +overwrite <keyid> + +Overwrite can be done without a key if security is not enabled. A key serial +of 0 can be passed in to indicate no key. + +The sysfs attribute "security" can be polled to wait on overwrite completion. +Overwrite can last tens of minutes or more depending on nvdimm size. + +An encrypted-key with the current user passphrase that is tied to the nvdimm +should be injected and its keyid should be passed in via sysfs. + +10. Master Update +----------------- +The command format for doing a master update is: +update <old keyid> <new keyid> + +The operating mechanism for master update is identical to update except the +master passphrase key is passed to the kernel. The master passphrase key +is just another encrypted-key. + +This command is only available when security is disabled. + +11. Master Erase +---------------- +The command format for doing a master erase is: +master_erase <current keyid> + +This command has the same operating mechanism as erase except the master +passphrase key is passed to the kernel. The master passphrase key is just +another encrypted-key. + +This command is only available when the master security is enabled, indicated +by the extended security status. + +[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf +[2]: http://www.t13.org/documents/UploadedDocuments/docs2006/e05179r4-ACS-SecurityClarifications.pdf diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/perf/thunderx2-pmu.txt new file mode 100644 index 000000000000..dffc57143736 --- /dev/null +++ b/Documentation/perf/thunderx2-pmu.txt @@ -0,0 +1,41 @@ +Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE) +============================================================= + +The ThunderX2 SoC PMU consists of independent, system-wide, per-socket +PMUs such as the Level 3 Cache (L3C) and DDR4 Memory Controller (DMC). + +The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles. +Events are counted for the default channel (i.e. channel 0) and prorated +to the total number of channels/tiles. + +The DMC and L3C support up to 4 counters. Counters are independently +programmable and can be started and stopped individually. Each counter +can be set to a different event. Counters are 32-bit and do not support +an overflow interrupt; they are read every 2 seconds. + +PMU UNCORE (perf) driver: + +The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and +L3C devices. Each PMU can be used to count up to 4 events +simultaneously. The PMUs provide a description of their available events +and configuration options under sysfs, see +/sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id. + +The driver does not support sampling, therefore "perf record" will not +work. Per-task perf sessions are also not supported. + +Examples: + +# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1 + +# perf stat -a -e \ +uncore_dmc_0/cnt_cycles/,\ +uncore_dmc_0/data_transfers/,\ +uncore_dmc_0/read_txns/,\ +uncore_dmc_0/write_txns/ sleep 1 + +# perf stat -a -e \ +uncore_l3c_0/read_request/,\ +uncore_l3c_0/read_hit/,\ +uncore_l3c_0/inv_request/,\ +uncore_l3c_0/inv_hit/ sleep 1 diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt index bdd344aa18d9..18c5feef2577 100644 --- a/Documentation/powerpc/firmware-assisted-dump.txt +++ b/Documentation/powerpc/firmware-assisted-dump.txt @@ -113,7 +113,15 @@ header, is usually reserved at an offset greater than boot memory size (see Fig. 1). This area is *not* released: this region will be kept permanently reserved, so that it can act as a receptacle for a copy of the boot memory content in addition to CPU state -and HPTE region, in the case a crash does occur. +and HPTE region, in the case a crash does occur. Since this reserved +memory area is used only after the system crash, there is no point in +blocking this significant chunk of memory from production kernel. +Hence, the implementation uses the Linux kernel's Contiguous Memory +Allocator (CMA) for memory reservation if CMA is configured for kernel. +With CMA reservation this memory will be available for applications to +use it, while kernel is prevented from using it. With this fadump will +still be able to capture all of the kernel memory and most of the user +space memory except the user pages that were present in CMA region. o Memory Reservation during first kernel @@ -162,6 +170,9 @@ How to enable firmware-assisted dump (fadump): 1. Set config option CONFIG_FA_DUMP=y and build kernel. 2. Boot into linux kernel with 'fadump=on' kernel cmdline option. + By default, fadump reserved memory will be initialized as CMA area. + Alternatively, user can boot linux kernel with 'fadump=nocma' to + prevent fadump to use CMA. 3. Optionally, user can also set 'crashkernel=' kernel cmdline to specify size of the memory to reserve for boot memory dump preservation. @@ -172,6 +183,10 @@ NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead 2. If firmware-assisted dump fails to reserve memory then it will fallback to existing kdump mechanism if 'crashkernel=' option is set at kernel cmdline. + 3. if user wants to capture all of user space memory and ok with + reserved memory not available to production system, then + 'fadump=nocma' kernel parameter can be used to fallback to + old behaviour. Sysfs/debugfs files: ------------ diff --git a/Documentation/powerpc/isa-versions.rst b/Documentation/powerpc/isa-versions.rst new file mode 100644 index 000000000000..812e20cc898c --- /dev/null +++ b/Documentation/powerpc/isa-versions.rst @@ -0,0 +1,74 @@ +CPU to ISA Version Mapping +========================== + +Mapping of some CPU versions to relevant ISA versions. + +========= ==================== +CPU Architecture version +========= ==================== +Power9 Power ISA v3.0B +Power8 Power ISA v2.07 +Power7 Power ISA v2.06 +Power6 Power ISA v2.05 +PA6T Power ISA v2.04 +Cell PPU - Power ISA v2.02 with some minor exceptions + - Plus Altivec/VMX ~= 2.03 +Power5++ Power ISA v2.04 (no VMX) +Power5+ Power ISA v2.03 +Power5 - PowerPC User Instruction Set Architecture Book I v2.02 + - PowerPC Virtual Environment Architecture Book II v2.02 + - PowerPC Operating Environment Architecture Book III v2.02 +PPC970 - PowerPC User Instruction Set Architecture Book I v2.01 + - PowerPC Virtual Environment Architecture Book II v2.01 + - PowerPC Operating Environment Architecture Book III v2.01 + - Plus Altivec/VMX ~= 2.03 +========= ==================== + + +Key Features +------------ + +========== ================== +CPU VMX (aka. Altivec) +========== ================== +Power9 Yes +Power8 Yes +Power7 Yes +Power6 Yes +PA6T Yes +Cell PPU Yes +Power5++ No +Power5+ No +Power5 No +PPC970 Yes +========== ================== + +========== ==== +CPU VSX +========== ==== +Power9 Yes +Power8 Yes +Power7 Yes +Power6 No +PA6T No +Cell PPU No +Power5++ No +Power5+ No +Power5 No +PPC970 No +========== ==== + +========== ==================== +CPU Transactional Memory +========== ==================== +Power9 Yes (* see transactional_memory.txt) +Power8 Yes +Power7 No +Power6 No +PA6T No +Cell PPU No +Power5++ No +Power5+ No +Power5 No +PPC970 No +========== ==================== diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt index 92999d4e0cb8..25a4b4cf04a6 100644 --- a/Documentation/scsi/scsi-parameters.txt +++ b/Documentation/scsi/scsi-parameters.txt @@ -97,11 +97,6 @@ parameters may be changed at runtime by the command allowing boot to proceed. none ignores them, expecting user space to do the scan. - scsi_mod.use_blk_mq= - [SCSI] use blk-mq I/O path by default - See SCSI_MQ_DEFAULT in drivers/scsi/Kconfig. - Format: <y/n> - sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 177c031763c0..c1dd4939f4ae 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -1098,8 +1098,6 @@ of interest: unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing restriction), 0=>can use full 32 bit (or better) DMA address space - use_clustering - 1=>SCSI commands in mid level's queue can be merged, - 0=>disallow SCSI command merging no_async_abort - 1=>Asynchronous aborts are not supported 0=>Timed-out commands will be aborted asynchronously hostt - pointer to driver's struct scsi_host_template from which diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index 3bb24e09a332..e8a1c35cd277 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -76,7 +76,7 @@ Usage:: Where:: - format:= 'default | ecryptfs' + format:= 'default | ecryptfs | enc32' key-type:= 'trusted' | 'user' @@ -173,3 +173,7 @@ are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details about the usage can be found in the file ``Documentation/security/keys/ecryptfs.rst``. + +Another new format 'enc32' has been defined in order to support encrypted keys +with payload size of 32 bytes. This will initially be used for nvdimm security +but may expand to other usages that require 32 bytes payload. diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.txt index f0354164cb0e..e0961a66130b 100644 --- a/Documentation/sh/new-machine.txt +++ b/Documentation/sh/new-machine.txt @@ -116,7 +116,6 @@ might look something like: * arch/sh/boards/vapor/setup.c - Setup code for imaginary board */ #include <linux/init.h> -#include <asm/rtc.h> /* for board_time_init() */ const char *get_system_type(void) { @@ -132,13 +131,6 @@ int __init platform_setup(void) * this board. */ - /* - * Presume all FooTech boards have the same broken timer, - * and also presume that we've defined foo_timer_init to - * do something useful. - */ - board_time_init = foo_timer_init; - /* Start-up imaginary PCI ... */ /* And whatever else ... */ diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 7d73882e2c27..187ce4f599a2 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -63,6 +63,7 @@ Currently, these files are in /proc/sys/vm: - swappiness - user_reserve_kbytes - vfs_cache_pressure +- watermark_boost_factor - watermark_scale_factor - zone_reclaim_mode @@ -856,6 +857,26 @@ ten times more freeable objects than there are. ============================================================= +watermark_boost_factor: + +This factor controls the level of reclaim when memory is being fragmented. +It defines the percentage of the high watermark of a zone that will be +reclaimed if pages of different mobility are being mixed within pageblocks. +The intent is that compaction has less work to do in the future and to +increase the success rate of future high-order allocations such as SLUB +allocations, THP and hugetlbfs pages. + +To make it sensible with respect to the watermark_scale_factor parameter, +the unit is in fractions of 10,000. The default value of 15,000 means +that up to 150% of the high watermark will be reclaimed in the event of +a pageblock being mixed due to fragmentation. The level of reclaim is +determined by the number of fragmentation events that occurred in the +recent past. If this value is smaller than a pageblock then a pageblocks +worth of pages will be reclaimed (e.g. 2MB on 64-bit x86). A boost factor +of 0 will disable the feature. + +============================================================= + watermark_scale_factor: This factor controls the aggressiveness of kswapd. It defines the diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst index 306997941ba1..6b4107cf4b98 100644 --- a/Documentation/trace/index.rst +++ b/Documentation/trace/index.rst @@ -22,3 +22,4 @@ Linux Tracing Technologies hwlat_detector intel_th stm + sys-t diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index c7e985f05d8f..f901ec77439c 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -119,5 +119,5 @@ If a deauthorized interface will be authorized so the driver probing must be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe For drivers that need multiple interfaces all needed interfaces should be -authroized first. After that the drivers should be probed. +authorized first. After that the drivers should be probed. This avoids side effects. diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst index 32f3d55c54b7..c4dbe6f7cdae 100644 --- a/Documentation/userspace-api/spec_ctrl.rst +++ b/Documentation/userspace-api/spec_ctrl.rst @@ -92,3 +92,12 @@ Speculation misfeature controls * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0); + +- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes + (Mitigate Spectre V2 style attacks against user processes) + + Invocations: + * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index cd209f7730af..356156f5c52d 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -305,6 +305,9 @@ the address space for which you want to return the dirty bitmap. They must be less than the value that KVM_CHECK_EXTENSION returns for the KVM_CAP_MULTI_ADDRESS_SPACE capability. +The bits in the dirty bitmap are cleared before the ioctl returns, unless +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is enabled. For more information, +see the description of the capability. 4.9 KVM_SET_MEMORY_ALIAS @@ -1129,10 +1132,15 @@ documentation when it pops into existence). 4.37 KVM_ENABLE_CAP -Capability: KVM_CAP_ENABLE_CAP, KVM_CAP_ENABLE_CAP_VM -Architectures: x86 (only KVM_CAP_ENABLE_CAP_VM), - mips (only KVM_CAP_ENABLE_CAP), ppc, s390 -Type: vcpu ioctl, vm ioctl (with KVM_CAP_ENABLE_CAP_VM) +Capability: KVM_CAP_ENABLE_CAP +Architectures: mips, ppc, s390 +Type: vcpu ioctl +Parameters: struct kvm_enable_cap (in) +Returns: 0 on success; -1 on error + +Capability: KVM_CAP_ENABLE_CAP_VM +Architectures: all +Type: vcpu ioctl Parameters: struct kvm_enable_cap (in) Returns: 0 on success; -1 on error @@ -3753,6 +3761,102 @@ Coalesced pio is based on coalesced mmio. There is little difference between coalesced mmio and pio except that coalesced pio records accesses to I/O ports. +4.117 KVM_CLEAR_DIRTY_LOG (vm ioctl) + +Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_dirty_log (in) +Returns: 0 on success, -1 on error + +/* for KVM_CLEAR_DIRTY_LOG */ +struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; +}; + +The ioctl clears the dirty status of pages in a memory slot, according to +the bitmap that is passed in struct kvm_clear_dirty_log's dirty_bitmap +field. Bit 0 of the bitmap corresponds to page "first_page" in the +memory slot, and num_pages is the size in bits of the input bitmap. +Both first_page and num_pages must be a multiple of 64. For each bit +that is set in the input bitmap, the corresponding page is marked "clean" +in KVM's dirty bitmap, and dirty tracking is re-enabled for that page +(for example via write-protection, or by clearing the dirty bit in +a page table entry). + +If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 specifies +the address space for which you want to return the dirty bitmap. +They must be less than the value that KVM_CHECK_EXTENSION returns for +the KVM_CAP_MULTI_ADDRESS_SPACE capability. + +This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT +is enabled; for more information, see the description of the capability. +However, it can always be used as long as KVM_CHECK_EXTENSION confirms +that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is present. + +4.118 KVM_GET_SUPPORTED_HV_CPUID + +Capability: KVM_CAP_HYPERV_CPUID +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_cpuid2 (in/out) +Returns: 0 on success, -1 on error + +struct kvm_cpuid2 { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry2 entries[0]; +}; + +struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; +}; + +This ioctl returns x86 cpuid features leaves related to Hyper-V emulation in +KVM. Userspace can use the information returned by this ioctl to construct +cpuid information presented to guests consuming Hyper-V enlightenments (e.g. +Windows or Hyper-V guests). + +CPUID feature leaves returned by this ioctl are defined by Hyper-V Top Level +Functional Specification (TLFS). These leaves can't be obtained with +KVM_GET_SUPPORTED_CPUID ioctl because some of them intersect with KVM feature +leaves (0x40000000, 0x40000001). + +Currently, the following list of CPUID leaves are returned: + HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS + HYPERV_CPUID_INTERFACE + HYPERV_CPUID_VERSION + HYPERV_CPUID_FEATURES + HYPERV_CPUID_ENLIGHTMENT_INFO + HYPERV_CPUID_IMPLEMENT_LIMITS + HYPERV_CPUID_NESTED_FEATURES + +HYPERV_CPUID_NESTED_FEATURES leaf is only exposed when Enlightened VMCS was +enabled on the corresponding vCPU (KVM_CAP_HYPERV_ENLIGHTENED_VMCS). + +Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure +with the 'nent' field indicating the number of entries in the variable-size +array 'entries'. If the number of entries is too low to describe all Hyper-V +feature leaves, an error (E2BIG) is returned. If the number is more or equal +to the number of Hyper-V feature leaves, the 'nent' field is adjusted to the +number of valid entries in the 'entries' array, which is then filled. + +'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved, +userspace should not expect to get any particular value there. + 5. The kvm_run structure ------------------------ @@ -4647,6 +4751,30 @@ and injected exceptions. * For the new DR6 bits, note that bit 16 is set iff the #DB exception will clear DR6.RTM. +7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT + +Architectures: all +Parameters: args[0] whether feature should be enabled or not + +With this capability enabled, KVM_GET_DIRTY_LOG will not automatically +clear and write-protect all pages that are returned as dirty. +Rather, userspace will have to do this operation separately using +KVM_CLEAR_DIRTY_LOG. + +At the cost of a slightly more complicated operation, this provides better +scalability and responsiveness for two reasons. First, +KVM_CLEAR_DIRTY_LOG ioctl can operate on a 64-page granularity rather +than requiring to sync a full memslot; this ensures that KVM does not +take spinlocks for an extended period of time. Second, in some cases a +large amount of time can pass between a call to KVM_GET_DIRTY_LOG and +userspace actually using the data in the page. Pages can be modified +during this time, which is inefficint for both the guest and userspace: +the guest will incur a higher penalty due to write protection faults, +while userspace can see false reports of dirty pages. Manual reprotection +helps reducing this time, improving guest performance and reducing the +number of dirty log false positives. + + 8. Other capabilities. ---------------------- diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst index fdd84cb8d511..b8e29f977f2d 100644 --- a/Documentation/vm/unevictable-lru.rst +++ b/Documentation/vm/unevictable-lru.rst @@ -143,7 +143,7 @@ using a number of wrapper functions: Query the address space, and return true if it is completely unevictable. -These are currently used in two places in the kernel: +These are currently used in three places in the kernel: (1) By ramfs to mark the address spaces of its inodes when they are created, and this mark remains for the life of the inode. @@ -154,6 +154,10 @@ These are currently used in two places in the kernel: swapped out; the application must touch the pages manually if it wants to ensure they're in memory. + (3) By the i915 driver to mark pinned address space until it's unpinned. The + amount of unevictable memory marked by i915 driver is roughly the bounded + object size in debugfs/dri/0/i915_gem_objects. + Detecting Unevictable Pages --------------------------- diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7727db8f94bc..5e9b826b5f62 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -61,18 +61,6 @@ Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields to struct boot_params for loading bzImage and ramdisk above 4G in 64bit. -Protocol 2.13: (Kernel 3.14) Support 32- and 64-bit flags being set in - xloadflags to support booting a 64-bit kernel from 32-bit - EFI - -Protocol 2.14: (Kernel 4.20) Added acpi_rsdp_addr holding the physical - address of the ACPI RSDP table. - The bootloader updates version with: - 0x8000 | min(kernel-version, bootloader-version) - kernel-version being the protocol version supported by - the kernel and bootloader-version the protocol version - supported by the bootloader. - **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -209,7 +197,6 @@ Offset Proto Name Meaning 0258/8 2.10+ pref_address Preferred loading address 0260/4 2.10+ init_size Linear memory required during initialization 0264/4 2.11+ handover_offset Offset of handover entry point -0268/8 2.14+ acpi_rsdp_addr Physical address of RSDP table (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -322,7 +309,7 @@ Protocol: 2.00+ Contains the magic number "HdrS" (0x53726448). Field name: version -Type: modify +Type: read Offset/size: 0x206/2 Protocol: 2.00+ @@ -330,12 +317,6 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. - Up to protocol version 2.13 this information is only read by the - bootloader. From protocol version 2.14 onwards the bootloader will - write the used protocol version or-ed with 0x8000 to the field. The - used protocol version will be the minimum of the supported protocol - versions of the bootloader and the kernel. - Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 @@ -763,17 +744,6 @@ Offset/size: 0x264/4 See EFI HANDOVER PROTOCOL below for more details. -Field name: acpi_rsdp_addr -Type: write -Offset/size: 0x268/8 -Protocol: 2.14+ - - This field can be set by the boot loader to tell the kernel the - physical address of the ACPI RSDP table. - - A value of 0 indicates the kernel should fall back to the standard - methods to locate the RSDP. - **** THE IMAGE CHECKSUM diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/resctrl_ui.txt index 52b10945ff75..d9aed8303984 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/resctrl_ui.txt @@ -1,4 +1,7 @@ -User Interface for Resource Allocation in Intel Resource Director Technology +User Interface for Resource Control feature + +Intel refers to this feature as Intel Resource Director Technology(Intel(R) RDT). +AMD refers to this feature as AMD Platform Quality of Service(AMD QoS). Copyright (C) 2016 Intel Corporation @@ -6,8 +9,8 @@ Fenghua Yu <fenghua.yu@intel.com> Tony Luck <tony.luck@intel.com> Vikas Shivappa <vikas.shivappa@intel.com> -This feature is enabled by the CONFIG_INTEL_RDT Kconfig and the -X86 /proc/cpuinfo flag bits: +This feature is enabled by the CONFIG_RESCTRL and the X86 /proc/cpuinfo +flag bits: RDT (Resource Director Technology) Allocation - "rdt_a" CAT (Cache Allocation Technology) - "cat_l3", "cat_l2" CDP (Code and Data Prioritization ) - "cdp_l3", "cdp_l2" diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index ad6d2a80cf05..abc53886655e 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -209,7 +209,7 @@ IOMMU (input/output memory management unit) mapping with memory protection, etc. Kernel boot message: "PCI-DMA: Using Calgary IOMMU" - iommu=[<size>][,noagp][,off][,force][,noforce][,leak[=<nr_of_leak_pages>] + iommu=[<size>][,noagp][,off][,force][,noforce] [,memaper[=<order>]][,merge][,fullflush][,nomerge] [,noaperture][,calgary] @@ -228,9 +228,6 @@ IOMMU (input/output memory management unit) allowed Overwrite iommu off workarounds for specific chipsets. fullflush Flush IOMMU on each allocation (default). nofullflush Don't use IOMMU fullflush. - leak Turn on simple iommu leak tracing (only when - CONFIG_IOMMU_LEAK is on). Default number of leak pages - is 20. memaper[=<order>] Allocate an own aperture over RAM with size 32MB<<order. (default: order=1, i.e. 64MB) merge Do scatter-gather (SG) merging. Implies "force" |
