diff options
Diffstat (limited to 'Documentation')
49 files changed, 919 insertions, 137 deletions
diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio index 2483756fccf5..aebda53ec0f7 100644 --- a/Documentation/ABI/testing/configfs-iio +++ b/Documentation/ABI/testing/configfs-iio @@ -19,3 +19,16 @@ KernelVersion: 4.4 Description: High resolution timers directory. Creating a directory here will result in creating a hrtimer trigger in the IIO subsystem. + +What: /config/iio/devices +Date: April 2016 +KernelVersion: 4.7 +Description: + Industrial IO software devices directory. + +What: /config/iio/devices/dummy +Date: April 2016 +KernelVersion: 4.7 +Description: + Dummy IIO devices directory. Creating a directory here will result + in creating a dummy IIO device in the IIO subystem. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index 2f4a0051b32d..1ba0d0fda9c0 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -1,6 +1,6 @@ What: /config/usb-gadget/gadget/functions/uvc.name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: UVC function directory streaming_maxburst - 0..15 (ss only) @@ -9,37 +9,37 @@ Description: UVC function directory What: /config/usb-gadget/gadget/functions/uvc.name/control Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Control descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/class Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Super speed control class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Full speed control class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Terminal descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Output terminal descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Default output terminal descriptors All attributes read only: @@ -53,12 +53,12 @@ Description: Default output terminal descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Camera terminal descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Default camera terminal descriptors All attributes read only: @@ -75,12 +75,12 @@ Description: Default camera terminal descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/processing Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Processing unit descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/processing/default Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Default processing unit descriptors All attributes read only: @@ -94,49 +94,49 @@ Description: Default processing unit descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/header Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Control header descriptors What: /config/usb-gadget/gadget/functions/uvc.name/control/header/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific control header descriptors dwClockFrequency bcdUVC What: /config/usb-gadget/gadget/functions/uvc.name/streaming Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Streaming descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Streaming class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Super speed streaming class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: High speed streaming class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Full speed streaming class descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Color matching descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Default color matching descriptors All attributes read only: @@ -150,12 +150,12 @@ Description: Default color matching descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: MJPEG format descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific MJPEG format descriptors All attributes read only, @@ -174,7 +174,7 @@ Description: Specific MJPEG format descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific MJPEG frame descriptors dwFrameInterval - indicates how frame interval can be @@ -196,12 +196,12 @@ Description: Specific MJPEG frame descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Uncompressed format descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific uncompressed format descriptors bmaControls - this format's data for bmaControls in @@ -221,7 +221,7 @@ Description: Specific uncompressed format descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific uncompressed frame descriptors dwFrameInterval - indicates how frame interval can be @@ -243,12 +243,12 @@ Description: Specific uncompressed frame descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Streaming header descriptors What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header/name Date: Dec 2014 -KernelVersion: 3.20 +KernelVersion: 4.0 Description: Specific streaming header descriptors All attributes read only: diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index df44998e7506..fee35c00cc4e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -32,6 +32,13 @@ Description: Description of the physical chip / device for device X. Typically a part number. +What: /sys/bus/iio/devices/iio:deviceX/timestamp_clock +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + String identifying current posix clock used to timestamp + buffered samples and events for device X. + What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency @@ -1565,3 +1572,10 @@ Description: * X is in the plane of the propellers, perpendicular to Y axis, and positive towards the starboard side of the UAV ; * Z is perpendicular to propellers plane and positive upwards. + +What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw +KernelVersion: 4.8 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) electric conductivity reading that + can be processed to siemens per meter. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x index 3740f253d406..6adba9058b22 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -1,54 +1,41 @@ -What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY - /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY -Date: December 2015 -KernelVersion: -Contact: Andrew F. Davis <afd@ti.com> -Description: - Get and set the resistance and the capacitance settings for the - Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for - Rf2 and Cf2 values. - -What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en -Date: December 2015 -KernelVersion: -Contact: Andrew F. Davis <afd@ti.com> -Description: - Enable or disable separate settings for the TransImpedance - Amplifier above, when disabled both values are set by the - first channel. - -What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw - /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: Get measured values from the ADC for these stages. Y is the - specific LED number. The values are expressed in 24-bit twos - complement. + specific stage number corresponding to datasheet stage names + as follows: + 1 -> LED2 + 2 -> ALED2/LED3 + 3 -> LED1 + 4 -> ALED1/LED4 + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 + respectively which simply helper channels containing the + calculated difference in the value of stage 1 - 2 and 3 - 4. + The values are expressed in 24-bit twos complement. -What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get differential values from the ADC for these stages. Y is the - specific LED number. The values are expressed in 24-bit twos - complement for the specified LEDs. + Get and set the offset cancellation DAC setting for these + stages. The values are expressed in 5-bit sign-magnitude. -What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset - /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get and set the offset cancellation DAC setting for these - stages. The values are expressed in 5-bit sign-magnitude. + Get and set the resistance and the capacitance settings for the + Transimpedance Amplifier during the associated stage. -What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get and set the LED current for the specified LED. Y is the - specific LED number. + Get and set the LED current for the specified LED active during + this stage. Y is the specific stage number. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 6708c5e264aa..33e96f740639 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -1,4 +1,4 @@ -What /sys/bus/iio/devices/iio:deviceX/in_proximity_raw +What /sys/bus/iio/devices/iio:deviceX/in_proximity_input Date: March 2014 KernelVersion: 3.15 Contact: Matt Ranostay <mranostay@gmail.com> diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl index f525bf56d1dd..e2ab6a1f223e 100644 --- a/Documentation/DocBook/iio.tmpl +++ b/Documentation/DocBook/iio.tmpl @@ -594,7 +594,7 @@ irqreturn_t sensor_iio_pollfunc(int irq, void *p) { - pf->timestamp = iio_get_time_ns(); + pf->timestamp = iio_get_time_ns((struct indio_dev *)p); return IRQ_WAKE_THREAD; } diff --git a/Documentation/RCU/Design/Requirements/Requirements.html b/Documentation/RCU/Design/Requirements/Requirements.html index e7e24b3e86e2..ece410f40436 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.html +++ b/Documentation/RCU/Design/Requirements/Requirements.html @@ -2391,6 +2391,41 @@ and <tt>RCU_NONIDLE()</tt> on the other while inspecting idle-loop code. Steven Rostedt supplied <tt>_rcuidle</tt> event tracing, which is used quite heavily in the idle loop. +However, there are some restrictions on the code placed within +<tt>RCU_NONIDLE()</tt>: + +<ol> +<li> Blocking is prohibited. + In practice, this is not a serious restriction given that idle + tasks are prohibited from blocking to begin with. +<li> Although nesting <tt>RCU_NONIDLE()</tt> is permited, they cannot + nest indefinitely deeply. + However, given that they can be nested on the order of a million + deep, even on 32-bit systems, this should not be a serious + restriction. + This nesting limit would probably be reached long after the + compiler OOMed or the stack overflowed. +<li> Any code path that enters <tt>RCU_NONIDLE()</tt> must sequence + out of that same <tt>RCU_NONIDLE()</tt>. + For example, the following is grossly illegal: + + <blockquote> + <pre> + 1 RCU_NONIDLE({ + 2 do_something(); + 3 goto bad_idea; /* BUG!!! */ + 4 do_something_else();}); + 5 bad_idea: + </pre> + </blockquote> + + <p> + It is just as illegal to transfer control into the middle of + <tt>RCU_NONIDLE()</tt>'s argument. + Yes, in theory, you could transfer in as long as you also + transferred out, but in practice you could also expect to get sharply + worded review comments. +</ol> <p> It is similarly socially unacceptable to interrupt an diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 0f7fb4298e7e..e93d04133fe7 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -49,7 +49,7 @@ rcupdate.rcu_task_stall_timeout This boot/sysfs parameter controls the RCU-tasks stall warning interval. A value of zero or less suppresses RCU-tasks stall warnings. A positive value sets the stall-warning interval - in jiffies. An RCU-tasks stall warning starts wtih the line: + in jiffies. An RCU-tasks stall warning starts with the line: INFO: rcu_tasks detected stalls on tasks: diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 111770ffa10e..204422719197 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -5,6 +5,9 @@ to start learning about RCU: 2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ 3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ 4. The RCU API, 2010 Edition http://lwn.net/Articles/418853/ + 2010 Big API Table http://lwn.net/Articles/419086/ +5. The RCU API, 2014 Edition http://lwn.net/Articles/609904/ + 2014 Big API Table http://lwn.net/Articles/609973/ What is RCU? diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index e27341f8a4c7..7f3d94ae81ff 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -46,7 +46,8 @@ Optional properties: The second cell represents the MICBIAS to be used. The third cell represents the value of the micd-pol-gpio pin. - - wlf,gpsw : Settings for the general purpose switch + - wlf,gpsw : Settings for the general purpose switch, set as one of the + ARIZONA_GPSW_XXX defines. Example: diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt new file mode 100644 index 000000000000..59b38557f1bb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt @@ -0,0 +1,14 @@ +APM X-Gene hwmon driver + +APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox. + +Required properties : + - compatible : should be "apm,xgene-slimpro-hwmon" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + hwmonslimpro { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt new file mode 100644 index 000000000000..07a250498fbb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt @@ -0,0 +1,42 @@ +Properties for Jedec JC-42.4 compatible temperature sensors + +Required properties: +- compatible: May include a device-specific string consisting of the + manufacturer and the name of the chip. A list of supported + chip names follows. + Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4 + compatible temperature sensor. + + Supported chip names: + adi,adt7408 + atmel,at30ts00 + atmel,at30tse004 + onnn,cat6095 + onnn,cat34ts02 + maxim,max6604 + microchip,mcp9804 + microchip,mcp9805 + microchip,mcp9808 + microchip,mcp98243 + microchip,mcp98244 + microchip,mcp9843 + nxp,se97 + nxp,se98 + st,stts2002 + st,stts2004 + st,stts3000 + st,stts424 + st,stts424e + idt,tse2002 + idt,tse2004 + idt,ts3000 + idt,ts3001 + +- reg: I2C address + +Example: + +temp-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; +}; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 539874490492..acc5cd64711c 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,6 +56,70 @@ maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface mc,rv3029c2 Real Time Clock Module with I2C-Bus +microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) +microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) +microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) +microchip,mcp4531-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) +microchip,mcp4532-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) +microchip,mcp4532-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) +microchip,mcp4532-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) +microchip,mcp4532-104 Microchip 7-bit Single I2C Digital Potentiometer (100k) +microchip,mcp4541-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4541-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4541-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4541-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4542-502 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4542-103 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4542-503 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4542-104 Microchip 7-bit Single I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4551-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) +microchip,mcp4551-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) +microchip,mcp4551-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) +microchip,mcp4551-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) +microchip,mcp4552-502 Microchip 8-bit Single I2C Digital Potentiometer (5k) +microchip,mcp4552-103 Microchip 8-bit Single I2C Digital Potentiometer (10k) +microchip,mcp4552-503 Microchip 8-bit Single I2C Digital Potentiometer (50k) +microchip,mcp4552-104 Microchip 8-bit Single I2C Digital Potentiometer (100k) +microchip,mcp4561-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4561-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4561-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4561-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4562-502 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4562-103 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4562-503 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4562-104 Microchip 8-bit Single I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4631-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) +microchip,mcp4631-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) +microchip,mcp4631-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) +microchip,mcp4631-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) +microchip,mcp4632-502 Microchip 7-bit Dual I2C Digital Potentiometer (5k) +microchip,mcp4632-103 Microchip 7-bit Dual I2C Digital Potentiometer (10k) +microchip,mcp4632-503 Microchip 7-bit Dual I2C Digital Potentiometer (50k) +microchip,mcp4632-104 Microchip 7-bit Dual I2C Digital Potentiometer (100k) +microchip,mcp4641-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4641-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4641-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4641-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4642-502 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4642-103 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4642-503 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4642-104 Microchip 7-bit Dual I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4651-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) +microchip,mcp4651-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) +microchip,mcp4651-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) +microchip,mcp4651-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) +microchip,mcp4652-502 Microchip 8-bit Dual I2C Digital Potentiometer (5k) +microchip,mcp4652-103 Microchip 8-bit Dual I2C Digital Potentiometer (10k) +microchip,mcp4652-503 Microchip 8-bit Dual I2C Digital Potentiometer (50k) +microchip,mcp4652-104 Microchip 8-bit Dual I2C Digital Potentiometer (100k) +microchip,mcp4661-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4661-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4661-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4661-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) +microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (5k) +microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) +microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) +microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) national,lm63 Temperature sensor with integrated fan control national,lm75 I2C TEMP SENSOR national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt new file mode 100644 index 000000000000..caaaed765ce4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt @@ -0,0 +1,41 @@ +* Broadcom's IPROC Static ADC controller + +Broadcom iProc ADC controller has 8 channels 10bit ADC. +Allows user to convert analog input voltage values to digital. + +Required properties: + +- compatible: Must be "brcm,iproc-static-adc" + +- adc-syscon: Handler of syscon node defining physical base address of the + controller and length of memory mapped region. + +- #io-channel-cells = <1>; As ADC has multiple outputs + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- io-channel-ranges: + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + +- clocks: Clock used for this block. + +- clock-names: Clock name should be given as tsc_clk. + +- interrupts: interrupt line number. + +For example: + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + adc-syscon = <&ts_adc_syscon>; + #io-channel-cells = <1>; + io-channel-ranges; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/max1363.txt b/Documentation/devicetree/bindings/iio/adc/max1363.txt new file mode 100644 index 000000000000..94a9011dd860 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1363.txt @@ -0,0 +1,63 @@ +* Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) + +The node for this driver must be a child node of a I2C controller, hence +all mandatory properties for your controller must be specified. See directory: + + Documentation/devicetree/bindings/i2c + +for more details. + +Required properties: + - compatible: Should be one of + "maxim,max1361" + "maxim,max1362" + "maxim,max1363" + "maxim,max1364" + "maxim,max1036" + "maxim,max1037" + "maxim,max1038" + "maxim,max1039" + "maxim,max1136" + "maxim,max1137" + "maxim,max1138" + "maxim,max1139" + "maxim,max1236" + "maxim,max1237" + "maxim,max1238" + "maxim,max1239" + "maxim,max11600" + "maxim,max11601" + "maxim,max11602" + "maxim,max11603" + "maxim,max11604" + "maxim,max11605" + "maxim,max11606" + "maxim,max11607" + "maxim,max11608" + "maxim,max11609" + "maxim,max11610" + "maxim,max11611" + "maxim,max11612" + "maxim,max11613" + "maxim,max11614" + "maxim,max11615" + "maxim,max11616" + "maxim,max11617" + "maxim,max11644" + "maxim,max11645" + "maxim,max11646" + "maxim,max11647" + - reg: Should contain the ADC I2C address + +Optional properties: + - vcc-supply: phandle to the regulator that provides power to the ADC. + - vref-supply: phandle to the regulator for ADC reference voltage. + - interrupts: IRQ line for the ADC. If not used the driver will use + polling. + +Example: +adc: max11644@36 { + compatible = "maxim,max11644"; + reg = <0x36>; + vref-supply = <&adc_vref>; +}; diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt new file mode 100644 index 000000000000..2962bd9a2b3d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt @@ -0,0 +1,22 @@ +* Atlas Scientific EC-SM OEM sensor + +http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf + +Required properties: + + - compatible: must be "atlas,ec-sm" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + +Example: + +atlas@64 { + compatible = "atlas,ec-sm"; + reg = <0x64>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +}; diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt new file mode 100644 index 000000000000..f0bbd7e1029b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt @@ -0,0 +1,124 @@ +* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver + +Required properties: + - compatible: Has to contain one of the following: + adi,ad5755 + adi,ad5755-1 + adi,ad5757 + adi,ad5735 + adi,ad5737 + + - reg: spi chip select number for the device + - spi-cpha or spi-cpol: is the only modes that is supported + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +See include/dt-bindings/iio/ad5755.h + - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an + external resistor and thereby bypasses + the internal compensation resistor. + - adi,dc-dc-phase: + Valid values for DC DC Phase control is: + 0: All dc-to-dc converters clock on the same edge. + 1: Channel A and Channel B clock on the same edge, + Channel C and Channel D clock on opposite edges. + 2: Channel A and Channel C clock on the same edge, + Channel B and Channel D clock on opposite edges. + 3: Channel A, Channel B, Channel C, and Channel D + clock 90 degrees out of phase from each other. + - adi,dc-dc-freq-hz: + Valid values for DC DC frequency is [Hz]: + 250000 + 410000 + 650000 + - adi,dc-dc-max-microvolt: + Valid values for the maximum allowed Vboost voltage supplied by + the dc-to-dc converter is: + 23000000 + 24500000 + 27000000 + 29500000 + +Optional for every channel: + - adi,mode: + Valid values for DAC modes is: + 0: 0 V to 5 V voltage range. + 1: 0 V to 10 V voltage range. + 2: Plus minus 5 V voltage range. + 3: Plus minus 10 V voltage range. + 4: 4 mA to 20 mA current range. + 5: 0 mA to 20 mA current range. + 6: 0 mA to 24 mA current range. + - adi,ext-current-sense-resistor: boolean set if the hardware a external + current sense resistor. + - adi,enable-voltage-overrange: boolean enable voltage overrange + - adi,slew: Array of slewrate settings should contain 3 fields: + 1: Should be either 0 or 1 in order to enable or disable slewrate. + 2: Slew rate settings: + Valid values for the slew rate update frequency: + 64000 + 32000 + 16000 + 8000 + 4000 + 2000 + 1000 + 500 + 250 + 125 + 64 + 32 + 16 + 8 + 4 + 0 + 3: Slew step size: + Valid values for the step size LSBs: + 1 + 2 + 4 + 16 + 32 + 64 + 128 + 256 + +Example: +dac@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "adi,ad5755"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + adi,dc-dc-phase = <0>; + adi,dc-dc-freq-hz = <410000>; + adi,dc-dc-max-microvolt = <23000000>; + channel@0 { + reg = <0>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@1 { + reg = <1>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@2 { + reg = <2>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; + channel@3 { + reg = <3>; + adi,mode = <4>; + adi,ext-current-sense-resistor; + adi,slew = <0 64000 1>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt index d7a6deb6b21e..c7198a03c906 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt @@ -1,7 +1,11 @@ -BMP085/BMP18x digital pressure sensors +BMP085/BMP18x/BMP28x digital pressure sensors Required properties: -- compatible: bosch,bmp085 +- compatible: must be one of: + "bosch,bmp085" + "bosch,bmp180" + "bosch,bmp280" + "bosch,bme280" Optional properties: - chip-id: configurable chip id for non-default chip revisions @@ -10,6 +14,10 @@ Optional properties: value range is 0-3 with rising sensitivity. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ +- reset-gpios: a GPIO line handling reset of the sensor: as the line is + active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) +- vddd-supply: digital voltage regulator (see regulator/regulator.txt) +- vdda-supply: analog voltage regulator (see regulator/regulator.txt) Example: @@ -21,4 +29,7 @@ pressure@77 { default-oversampling = <2>; interrupt-parent = <&gpio0>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; }; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 5844cf72862d..e41fe340162b 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -64,3 +64,4 @@ Pressure sensors: - st,lps001wp-press - st,lps25h-press - st,lps331ap-press +- st,lps22hb-press diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 793c20ff8fcc..5393e2a45a42 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -21,6 +21,7 @@ Main node required properties: "arm,pl390" "arm,tc11mp-gic" "brcm,brahma-b15-gic" + "nvidia,tegra210-agic" "qcom,msm-8660-qgic" "qcom,msm-qgic2" - interrupt-controller : Identifies the node as an interrupt controller @@ -68,7 +69,7 @@ Optional "ic_clk" (for "arm,arm11mp-gic") "PERIPHCLKEN" (for "arm,cortex-a15-gic") "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic") - "clk" (for "arm,gic-400") + "clk" (for "arm,gic-400" and "nvidia,tegra210") "gclk" (for "arm,pl390") - power-domains : A phandle and PM domain specifier as defined by bindings of diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt new file mode 100644 index 000000000000..6c6e85324b9d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt @@ -0,0 +1,22 @@ +Aspeed Vectored Interrupt Controller + +These bindings are for the Aspeed AST2400 interrupt controller register layout. +The SoC has an legacy register layout, but this driver does not support that +mode of operation. + +Required properties: + +- compatible : should be "aspeed,ast2400-vic". + +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +Example: + + vic: interrupt-controller@1e6c0080 { + compatible = "aspeed,ast2400-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1e6c0080 0x80>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt new file mode 100644 index 000000000000..c26478be391b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt @@ -0,0 +1,40 @@ +TI DA8xx/OMAP-L1xx/AM18xx USB PHY + +Required properties: + - compatible: must be "ti,da830-usb-phy". + - #phy-cells: must be 1. + +This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG +controllers on DA8xx SoCs. Consumers of this device should use index 0 for +the USB 2.0 phy device and index 1 for the USB 1.1 phy device. + +It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon" +to access the CFGCHIP2 register. + +Example: + + cfgchip: cfgchip@1417c { + compatible = "ti,da830-cfgchip", "syscon"; + reg = <0x1417c 0x14>; + }; + + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + }; + + usb20: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x1000>; + interrupts = <58>; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + }; + + usb11: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index 68498d560354..cc6be9680a6d 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -5,11 +5,13 @@ Required properties: "rockchip,rk3066a-usb-phy" "rockchip,rk3188-usb-phy" "rockchip,rk3288-usb-phy" - - rockchip,grf : phandle to the syscon managing the "general - register files" - #address-cells: should be 1 - #size-cells: should be 0 +Deprecated properties: + - rockchip,grf : phandle to the syscon managing the "general + register files" - phy should be a child of the GRF instead + Sub-nodes: Each PHY should be represented as a sub-node. @@ -28,14 +30,19 @@ Optional Properties: Example: -usbphy: phy { - compatible = "rockchip,rk3288-usb-phy"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + usbphy: phy { + compatible = "rockchip,rk3288-usb-phy"; + #address-cells = <1>; + #size-cells = <0>; - usbphy0: usb-phy0 { - #phy-cells = <0>; - reg = <0x320>; + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x320>; + }; }; }; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 936ab5b87324..f5561ac7e17e 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -42,6 +42,9 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -63,3 +66,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 528c3b90f23c..1e4000d83aee 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -31,6 +31,8 @@ Required properties: - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. + - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. + - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, @@ -76,6 +78,10 @@ Optional properties: - dmas: Must contain a list of two references to DMA specifiers, one for transmission, and one for reception. - dma-names: Must contain a list of two DMA names, "tx" and "rx". + - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the + generic serial DT bindings in serial.txt. + - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow + control, cfr. the generic serial DT bindings in serial.txt. Example: aliases { diff --git a/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt new file mode 100644 index 000000000000..3ca89cd1caef --- /dev/null +++ b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt @@ -0,0 +1,17 @@ +Oxford Semiconductor OXNAS SoCs Family RPS Timer +================================================ + +Required properties: +- compatible: Should be "oxsemi,ox810se-rps-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of the two timers +- clocks : The phandle of the timer clock source + +example: + +timer0: timer@200 { + compatible = "oxsemi,ox810se-rps-timer"; + reg = <0x200 0x40>; + clocks = <&rpsclk>; + interrupts = <4 5>; +}; diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt index 87f0b0042bae..a41b184d5538 100644 --- a/Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt +++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt @@ -1,7 +1,9 @@ -Rockchip rk3288 timer +Rockchip rk timer Required properties: -- compatible: shall be "rockchip,rk3288-timer" +- compatible: shall be one of: + "rockchip,rk3288-timer" - for rk3066, rk3036, rk3188, rk322x, rk3288, rk3368 + "rockchip,rk3399-timer" - for rk3399 - reg: base address of the timer register starting with TIMERS CONTROL register - interrupts: should contain the interrupts for Timer0 - clocks : must contain an entry for each entry in clock-names diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 1084e2bcbe1c..341dc67f3472 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -93,7 +93,7 @@ Example: phys = <&usb_phy0>; phy-names = "usb-phy"; vbus-supply = <®_usb0_vbus>; - gadget-itc-setting = <0x4>; /* 4 micro-frames */ + itc-setting = <0x4>; /* 4 micro-frames */ /* Incremental burst of unspecified length */ ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; /* 64 bytes */ diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index 19233b7365e1..9df456968596 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -14,7 +14,7 @@ Optional properties: - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair - phy-names : "usb" -- resets : phandle + reset specifier pair +- resets : a list of phandle + reset specifier pairs Example: diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index e8d00759bfa5..5b61eeae3f6e 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -725,7 +725,7 @@ IRQ, you can set it by doing: > echo 1 > /proc/irq/10/smp_affinity This means that only the first CPU will handle the IRQ, but you can also echo -5 which means that only the first and fourth CPU can handle the IRQ. +5 which means that only the first and third CPU can handle the IRQ. The contents of each smp_affinity file is the same by default: diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/gdb-kernel-debugging.txt index 4ab7d43d0754..7050ce8794b9 100644 --- a/Documentation/gdb-kernel-debugging.txt +++ b/Documentation/gdb-kernel-debugging.txt @@ -139,27 +139,6 @@ Examples of using the Linux-provided gdb helpers start_comm = "swapper/2\000\000\000\000\000\000" } - o Dig into a radix tree data structure, such as the IRQ descriptors: - (gdb) print (struct irq_desc)$lx_radix_tree_lookup(irq_desc_tree, 18) - $6 = { - irq_common_data = { - state_use_accessors = 67584, - handler_data = 0x0 <__vectors_start>, - msi_desc = 0x0 <__vectors_start>, - affinity = {{ - bits = {65535} - }} - }, - irq_data = { - mask = 0, - irq = 18, - hwirq = 27, - common = 0xee803d80, - chip = 0xc0eb0854 <gic_data>, - domain = 0xee808000, - parent_data = 0x0 <__vectors_start>, - chip_data = 0xc0eb0854 <gic_data> - } <... trimmed ...> List of commands and functions ------------------------------ diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index f1d4fe4c366c..44013d23b3f0 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -24,7 +24,7 @@ Supported chips: AW9D-MAX) (2) 1) For revisions 2 and 3 uGuru's the driver can autodetect the sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's - this doesnot always work. For these uGuru's the autodection can + this does not always work. For these uGuru's the autodetection can be overridden with the bank1_types module param. For all 3 known revison 1 motherboards the correct use of this param is: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates new file mode 100644 index 000000000000..2a1bf69c6a26 --- /dev/null +++ b/Documentation/hwmon/ftsteutates @@ -0,0 +1,23 @@ +Kernel driver ftsteutates +===================== + +Supported chips: + * FTS Teutates + Prefix: 'ftsteutates' + Addresses scanned: I2C 0x73 (7-Bit) + +Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com> + + +Description +----------- +The BMC Teutates is the Eleventh generation of Superior System +monitoring and thermal management solution. It is builds on the basic +functionality of the BMC Theseus and contains several new features and +enhancements. It can monitor up to 4 voltages, 16 temperatures and +8 fans. It also contains an integrated watchdog which is currently +implemented in this driver. + +Specification of the chip can be found here: +ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf +ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221 new file mode 100644 index 000000000000..0ff74854cb2e --- /dev/null +++ b/Documentation/hwmon/ina3221 @@ -0,0 +1,35 @@ +Kernel driver ina3221 +===================== + +Supported chips: + * Texas Instruments INA3221 + Prefix: 'ina3221' + Addresses: I2C 0x40 - 0x43 + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + +Author: Andrew F. Davis <afd@ti.com> + +Description +----------- + +The Texas Instruments INA3221 monitors voltage, current, and power on the high +side of up to three D.C. power supplies. The INA3221 monitors both shunt drop +and supply voltage, with programmable conversion times and averaging, current +and power are calculated host-side from these. + +Sysfs entries +------------- + +in[123]_input Bus voltage(mV) channels +curr[123]_input Current(mA) measurement channels +shunt[123]_resistor Shunt resistance(uOhm) channels +curr[123]_crit Critical alert current(mA) setting, activates the + corresponding alarm when the respective current + is above this value +curr[123]_crit_alarm Critical alert current limit exceeded +curr[123]_max Warning alert current(mA) setting, activates the + corresponding alarm when the respective current + average is above this value. +curr[123]_max_alarm Warning alert current limit exceeded +in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index f7f1830a2566..b4b671f22453 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -18,10 +18,11 @@ Supported chips: * Maxim MAX6604 Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf - * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843 + * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843 Datasheets: http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf diff --git a/Documentation/hwmon/max1668 b/Documentation/hwmon/max1668 index 0616ed9758df..8f9d570dbfec 100644 --- a/Documentation/hwmon/max1668 +++ b/Documentation/hwmon/max1668 @@ -17,7 +17,7 @@ This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989 chips. The three devices are very similar, but the MAX1805 has a reduced feature -set; only two remote temperature inputs vs the four avaible on the other +set; only two remote temperature inputs vs the four available on the other two ICs. The driver is able to distinguish between the devices and creates sysfs diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x new file mode 100644 index 000000000000..b0d88184f48e --- /dev/null +++ b/Documentation/hwmon/sht3x @@ -0,0 +1,76 @@ +Kernel driver sht3x +=================== + +Supported chips: + * Sensirion SHT3x-DIS + Prefix: 'sht3x' + Addresses scanned: none + Datasheet: http://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity/Sensirion_Humidity_Datasheet_SHT3x_DIS.pdf + +Author: + David Frey <david.frey@sensirion.com> + Pascal Sachs <pascal.sachs@sensirion.com> + +Description +----------- + +This driver implements support for the Sensirion SHT3x-DIS chip, a humidity +and temperature sensor. Temperature is measured in degrees celsius, relative +humidity is expressed as a percentage. In the sysfs interface, all values are +scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. + +The device communicates with the I2C protocol. Sensors can have the I2C +addresses 0x44 or 0x45, depending on the wiring. See +Documentation/i2c/instantiating-devices for methods to instantiate the device. + +There are two options configurable by means of sht3x_platform_data: +1. blocking (pull the I2C clock line down while performing the measurement) or + non-blocking mode. Blocking mode will guarantee the fastest result but + the I2C bus will be busy during that time. By default, non-blocking mode + is used. Make sure clock-stretching works properly on your device if you + want to use blocking mode. +2. high or low accuracy. High accuracy is used by default and using it is + strongly recommended. + +The sht3x sensor supports a single shot mode as well as 5 periodic measure +modes, which can be controlled with the update_interval sysfs interface. +The allowed update_interval in milliseconds are as follows: + * 0 single shot mode + * 2000 0.5 Hz periodic measurement + * 1000 1 Hz periodic measurement + * 500 2 Hz periodic measurement + * 250 4 Hz periodic measurement + * 100 10 Hz periodic measurement + +In the periodic measure mode, the sensor automatically triggers a measurement +with the configured update interval on the chip. When a temperature or humidity +reading exceeds the configured limits, the alert attribute is set to 1 and +the alert pin on the sensor is set to high. +When the temperature and humidity readings move back between the hysteresis +values, the alert bit is set to 0 and the alert pin on the sensor is set to +low. + +sysfs-Interface +--------------- + +temp1_input: temperature input +humidity1_input: humidity input +temp1_max: temperature max value +temp1_max_hyst: temperature hysteresis value for max limit +humidity1_max: humidity max value +humidity1_max_hyst: humidity hysteresis value for max limit +temp1_min: temperature min value +temp1_min_hyst: temperature hysteresis value for min limit +humidity1_min: humidity min value +humidity1_min_hyst: humidity hysteresis value for min limit +temp1_alarm: alarm flag is set to 1 if the temperature is outside the + configured limits. Alarm only works in periodic measure mode +humidity1_alarm: alarm flag is set to 1 if the humidity is outside the + configured limits. Alarm only works in periodic measure mode +heater_enable: heater enable, heating element removes excess humidity from + sensor + 0: turned off + 1: turned on +update_interval: update interval, 0 for single shot, interval in msec + for periodic measurement. If the interval is not supported + by the sensor, the next faster interval is chosen diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index d201828d202f..57f60307accc 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -15,10 +15,15 @@ increase the chances of your change being accepted. Documentation/SubmittingPatches Documentation/CodingStyle -* If your patch generates checkpatch warnings, please refrain from explanations - such as "I don't like that coding style". Keep in mind that each unnecessary - warning helps hiding a real problem. If you don't like the kernel coding - style, don't write kernel drivers. +* Please run your patch through 'checkpatch --strict'. There should be no + errors, no warnings, and few if any check messages. If there are any + messages, please be prepared to explain. + +* If your patch generates checkpatch errors, warnings, or check messages, + please refrain from explanations such as "I prefer that coding style". + Keep in mind that each unnecessary message helps hiding a real problem, + and a consistent coding style makes it easier for others to understand + and review the code. * Please test your patch thoroughly. We are not your test group. Sometimes a patch can not or not completely be tested because of missing @@ -61,15 +66,30 @@ increase the chances of your change being accepted. * Make sure that all dependencies are listed in Kconfig. +* Please list include files in alphabetic order. + +* Please align continuation lines with '(' on the previous line. + * Avoid forward declarations if you can. Rearrange the code if necessary. +* Avoid macros to generate groups of sensor attributes. It not only confuses + checkpatch, but also makes it more difficult to review the code. + * Avoid calculations in macros and macro-generated functions. While such macros may save a line or so in the source, it obfuscates the code and makes code review more difficult. It may also result in code which is more complicated than necessary. Use inline functions or just regular functions instead. +* Limit the number of kernel log messages. In general, your driver should not + generate an error message just because a runtime operation failed. Report + errors to user space instead, using an appropriate error code. Keep in mind + that kernel error log messages not only fill up the kernel log, but also are + printed synchronously, most likely with interrupt disabled, often to a serial + console. Excessive logging can seriously affect system performance. + * Use devres functions whenever possible to allocate resources. For rationale and supported functions, please see Documentation/driver-model/devres.txt. + If a function is not supported by devres, consider using devm_add_action(). * If the driver has a detect function, make sure it is silent. Debug messages and messages printed after a successful detection are acceptable, but it @@ -96,8 +116,16 @@ increase the chances of your change being accepted. writing to it might cause a bad misconfiguration. * Make sure there are no race conditions in the probe function. Specifically, - completely initialize your chip first, then create sysfs entries and register - with the hwmon subsystem. + completely initialize your chip and your driver first, then register with + the hwmon subsystem. + +* Use devm_hwmon_device_register_with_groups() or, if your driver needs a remove + function, hwmon_device_register_with_groups() to register your driver with the + hwmon subsystem. Try using devm_add_action() instead of a remove function if + possible. Do not use hwmon_device_register(). + +* Your driver should be buildable as module. If not, please be prepared to + explain why it has to be built into the kernel. * Do not provide support for deprecated sysfs attributes. diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index 711f75e189eb..2d9ca42213cf 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -22,6 +22,9 @@ Supported chips: Prefix: 'tmp435' Addresses scanned: I2C 0x48 - 0x4f Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html + * Texas Instruments TMP461 + Prefix: 'tmp461' + Datasheet: http://www.ti.com/product/tmp461 Authors: Hans de Goede <hdegoede@redhat.com> @@ -31,8 +34,8 @@ Description ----------- This driver implements support for Texas Instruments TMP401, TMP411, -TMP431, TMP432 and TMP435 chips. These chips implement one or two remote -and one local temperature sensors. Temperature is measured in degrees +TMP431, TMP432, TMP435, and TMP461 chips. These chips implement one or two +remote and one local temperature sensors. Temperature is measured in degrees Celsius. Resolution of the remote sensor is 0.0625 degree. Local sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not supported by the driver so far, so using the default resolution of 0.5 @@ -55,3 +58,10 @@ some additional features. TMP432 is compatible with TMP401 and TMP431. It supports two external temperature sensors. + +TMP461 is compatible with TMP401. It supports offset correction +that is applied to the remote sensor. + +* Sensor offset values are temperature values + + Exported via sysfs attribute tempX_offset diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 13f888a02a3d..385a5ef41c17 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -47,6 +47,7 @@ This document describes the Linux kernel Makefiles. --- 7.2 genhdr-y --- 7.3 destination-y --- 7.4 generic-y + --- 7.5 generated-y === 8 Kbuild Variables === 9 Makefile language @@ -1319,6 +1320,19 @@ See subsequent chapter for the syntax of the Kbuild file. Example: termios.h #include <asm-generic/termios.h> + --- 7.5 generated-y + + If an architecture generates other header files alongside generic-y + wrappers, and not included in genhdr-y, then generated-y specifies + them. + + This prevents them being treated as stale asm-generic wrappers and + removed. + + Example: + #arch/x86/include/asm/Kbuild + generated-y += syscalls_32.h + === 8 Kbuild Variables The top Makefile exports the following variables: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 68b0c022861a..f1fac4d3dc51 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -687,6 +687,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. [SPARC64] tick [X86-64] hpet,tsc + clocksource.arm_arch_timer.evtstrm= + [ARM,ARM64] + Format: <bool> + Enable/disable the eventstream feature of the ARM + architected timer so that code using WFE-based polling + loops can be debugged more effectively on production + systems. + clearcpuid=BITNUM [X86] Disable CPUID feature X for the kernel. See arch/x86/include/asm/cpufeatures.h for the valid bit @@ -1803,12 +1811,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. - kaslr/nokaslr [X86] - Enable/disable kernel and module base offset ASLR - (Address Space Layout Randomization) if built into - the kernel. When CONFIG_HIBERNATION is selected, - kASLR is disabled by default. When kASLR is enabled, - hibernation will be disabled. + nokaslr [KNL] + When CONFIG_RANDOMIZE_BASE is set, this disables + kernel and module base offset ASLR (Address Space + Layout Randomization). keepinitrd [HW,ARM] diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index d406d98339b2..44f5e6bccd97 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -74,8 +74,8 @@ blink_set() function (see <linux/leds.h>). To set an LED to blinking, however, it is better to use the API function led_blink_set(), as it will check and implement software fallback if necessary. -To turn off blinking again, use the API function led_brightness_set() -as that will not just set the LED brightness but also stop any software +To turn off blinking, use the API function led_brightness_set() +with brightness value LED_OFF, which should stop any software timers that may have been required for blinking. The blink_set() function should choose a user friendly blinking value diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 147ae8ec836f..a4d0a99de04d 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -806,6 +806,41 @@ out-guess your code. More generally, although READ_ONCE() does force the compiler to actually emit code for a given load, it does not force the compiler to use the results. +In addition, control dependencies apply only to the then-clause and +else-clause of the if-statement in question. In particular, it does +not necessarily apply to code following the if-statement: + + q = READ_ONCE(a); + if (q) { + WRITE_ONCE(b, p); + } else { + WRITE_ONCE(b, r); + } + WRITE_ONCE(c, 1); /* BUG: No ordering against the read from "a". */ + +It is tempting to argue that there in fact is ordering because the +compiler cannot reorder volatile accesses and also cannot reorder +the writes to "b" with the condition. Unfortunately for this line +of reasoning, the compiler might compile the two writes to "b" as +conditional-move instructions, as in this fanciful pseudo-assembly +language: + + ld r1,a + ld r2,p + ld r3,r + cmp r1,$0 + cmov,ne r4,r2 + cmov,eq r4,r3 + st r4,b + st $1,c + +A weakly ordered CPU would have no dependency of any sort between the load +from "a" and the store to "c". The control dependencies would extend +only to the pair of cmov instructions and the store depending on them. +In short, control dependencies apply only to the stores in the then-clause +and else-clause of the if-statement in question (including functions +invoked by those two clauses), not to code following that if-statement. + Finally, control dependencies do -not- provide transitivity. This is demonstrated by two related examples, with the initial values of x and y both being zero: @@ -869,6 +904,12 @@ In summary: atomic{,64}_read() can help to preserve your control dependency. Please see the COMPILER BARRIER section for more information. + (*) Control dependencies apply only to the then-clause and else-clause + of the if-statement containing the control dependency, including + any functions that these two clauses call. Control dependencies + do -not- apply to code following the if-statement containing the + control dependency. + (*) Control dependencies pair normally with other types of barriers. (*) Control dependencies do -not- provide transitivity. If you diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 8638f61c8c9d..37eca00796ee 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -263,19 +263,23 @@ scmd->allowed. 3. scmd recovered ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd - - shost->host_failed-- - clear scmd->eh_eflags - scsi_setup_cmd_retry() - move from local eh_work_q to local eh_done_q LOCKING: none + CONCURRENCY: at most one thread per separate eh_work_q to + keep queue manipulation lockless 4. EH completes ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper - layer of failure. + layer of failure. May be called concurrently but must have + a no more than one thread per separate eh_work_q to + manipulate the queue locklessly - scmd is removed from eh_done_q and scmd->eh_entry is cleared - if retry is necessary, scmd is requeued using scsi_queue_insert() - otherwise, scsi_finish_command() is invoked for scmd + - zero shost->host_failed LOCKING: queue or finish function performs appropriate locking diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index a3683ce2a2f3..33204604de6c 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -58,6 +58,7 @@ show up in /proc/sys/kernel: - panic_on_stackoverflow - panic_on_unrecovered_nmi - panic_on_warn +- panic_on_rcu_stall - perf_cpu_time_max_percent - perf_event_paranoid - perf_event_max_stack @@ -618,6 +619,17 @@ a kernel rebuild when attempting to kdump at the location of a WARN(). ============================================================== +panic_on_rcu_stall: + +When set to 1, calls panic() after RCU stall detection messages. This +is useful to define the root cause of RCU stalls using a vmcore. + +0: do not panic() when RCU stall takes place, default behavior. + +1: panic() after printing RCU stall messages. + +============================================================== + perf_cpu_time_max_percent: Hints to the kernel how much CPU time it should be allowed to diff --git a/Documentation/x86/intel_mpx.txt b/Documentation/x86/intel_mpx.txt index 1a5a12184a35..85d0549ad846 100644 --- a/Documentation/x86/intel_mpx.txt +++ b/Documentation/x86/intel_mpx.txt @@ -45,7 +45,7 @@ is how we expect the compiler, application and kernel to work together. MPX-instrumented. 3) The kernel detects that the CPU has MPX, allows the new prctl() to succeed, and notes the location of the bounds directory. Userspace is - expected to keep the bounds directory at that locationWe note it + expected to keep the bounds directory at that location. We note it instead of reading it each time because the 'xsave' operation needed to access the bounds directory register is an expensive operation. 4) If the application needs to spill bounds out of the 4 registers, it @@ -167,7 +167,7 @@ If a #BR is generated due to a bounds violation caused by MPX. We need to decode MPX instructions to get violation address and set this address into extended struct siginfo. -The _sigfault feild of struct siginfo is extended as follow: +The _sigfault field of struct siginfo is extended as follow: 87 /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ 88 struct { @@ -240,5 +240,5 @@ them at the same bounds table. This is allowed architecturally. See more information "Intel(R) Architecture Instruction Set Extensions Programming Reference" (9.3.4). -However, if users did this, the kernel might be fooled in to unmaping an +However, if users did this, the kernel might be fooled in to unmapping an in-use bounds table since it does not recognize sharing. diff --git a/Documentation/x86/tlb.txt b/Documentation/x86/tlb.txt index 39d172326703..6a0607b99ed8 100644 --- a/Documentation/x86/tlb.txt +++ b/Documentation/x86/tlb.txt @@ -5,7 +5,7 @@ memory, it has two choices: from areas other than the one we are trying to flush will be destroyed and must be refilled later, at some cost. 2. Use the invlpg instruction to invalidate a single page at a - time. This could potentialy cost many more instructions, but + time. This could potentially cost many more instructions, but it is a much more precise operation, causing no collateral damage to other TLB entries. @@ -19,7 +19,7 @@ Which method to do depends on a few things: work. 3. The size of the TLB. The larger the TLB, the more collateral damage we do with a full flush. So, the larger the TLB, the - more attrative an individual flush looks. Data and + more attractive an individual flush looks. Data and instructions have separate TLBs, as do different page sizes. 4. The microarchitecture. The TLB has become a multi-level cache on modern CPUs, and the global flushes have become more diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck index b1fb30273286..d0648a74fceb 100644 --- a/Documentation/x86/x86_64/machinecheck +++ b/Documentation/x86/x86_64/machinecheck @@ -36,7 +36,7 @@ between all CPUs. check_interval How often to poll for corrected machine check errors, in seconds - (Note output is hexademical). Default 5 minutes. When the poller + (Note output is hexadecimal). Default 5 minutes. When the poller finds MCEs it triggers an exponential speedup (poll more often) on the polling interval. When the poller stops finding MCEs, it triggers an exponential backoff (poll less often) on the polling diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 5aa738346062..8c7dd5957ae1 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -39,4 +39,8 @@ memory window (this size is arbitrary, it can be raised later if needed). The mappings are not part of any other kernel PGD and are only available during EFI runtime calls. +Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all +physical memory, vmalloc/ioremap space and virtual memory map are randomized. +Their order is preserved but their base will be offset early at boot time. + -Andi Kleen, Jul 2004 |