diff options
Diffstat (limited to 'Documentation')
9 files changed, 209 insertions, 4 deletions
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index d7b1f016bd62..f8efc21998bf 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -33,6 +33,11 @@ SunXi family - Next Thing Co GR8 (sun5i) + * Single ARM Cortex-A7 based SoCs + - Allwinner V3s (sun8i) + + Datasheet + http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + * Dual ARM Cortex-A7 based SoCs - Allwinner A20 (sun7i) + User Manual @@ -71,9 +76,11 @@ SunXi family + Datasheet http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf - - Allwinner V3s (sun8i) + - Allwinner R40 (sun8i) + Datasheet - http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf + + User Manual + https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt new file mode 100644 index 000000000000..72f8d08198b6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt @@ -0,0 +1,18 @@ +Amlogic Meson8 and Meson8b power-management-unit: +------------------------------------------------- + +The pmu is used to turn off and on different power domains of the SoCs +This includes the power to the CPU cores. + +Required node properties: +- compatible value : depending on the SoC this should be one of: + "amlogic,meson8-pmu" + "amlogic,meson8b-pmu" +- reg : physical base address and the size of the registers window + +Example: + + pmu@c81000e4 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xc81000e0 0x18>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt new file mode 100644 index 000000000000..3473ddaadfac --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt @@ -0,0 +1,32 @@ +Amlogic Meson8 and Meson8b SRAM for smp bringup: +------------------------------------------------ + +Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. +Once the core gets powered up it executes the code that is residing at a +specific location. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : depending on the SoC this should be one of: + "amlogic,meson8-smp-sram" + "amlogic,meson8b-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index b92f12bd5244..a0009b72e9be 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -197,6 +197,8 @@ described below. "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" + "amlogic,meson8-smp" + "amlogic,meson8b-smp" "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31..ce8dabf8c0f9 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index d2c46449b4eb..e4beec3d9ad3 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,6 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 + allwinner-sun8i-r40 + allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 nextthing,gr8 diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 000000000000..fb1790e39398 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,93 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6..fd823d6091b2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 000000000000..9780957c9115 --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_mpu"; + }; |