diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml | 129 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 65 |
2 files changed, 129 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml new file mode 100644 index 000000000000..f84f92c4dd53 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/snps,dw-apb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare APB GPIO controller + +description: | + Synopsys DesignWare GPIO controllers have a configurable number of ports, + each of which are intended to be represented as child nodes with the generic + GPIO-controller properties as desribed in this bindings file. + +maintainers: + - Hoan Tran <hoan@os.amperecomputing.com> + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: snps,dw-apb-gpio + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: APB interface clock source + + clock-names: + items: + - const: bus + + resets: + maxItems: 1 + +patternProperties: + "^gpio-(port|controller)@[0-9a-f]+$": + type: object + properties: + compatible: + const: snps,dw-apb-gpio-port + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + snps,nr-gpios: + description: The number of GPIO pins exported by the port. + default: 32 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + maximum: 32 + + interrupts: + description: | + The interrupts to the parent controller raised when GPIOs generate + the interrupts. If the controller provides one combined interrupt + for all GPIOs, specify a single interrupt. If the controller provides + one interrupt for each GPIO, provide a list of interrupts that + correspond to each of the GPIO pins. + minItems: 1 + maxItems: 32 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + + dependencies: + interrupt-controller: [ interrupts ] + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +examples: + - | + gpio: gpio@20000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <0>; + }; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt deleted file mode 100644 index 839dd32ffe11..000000000000 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ /dev/null @@ -1,65 +0,0 @@ -* Synopsys DesignWare APB GPIO controller - -Required properties: -- compatible : Should contain "snps,dw-apb-gpio" -- reg : Address and length of the register set for the device. -- #address-cells : should be 1 (for addressing port subnodes). -- #size-cells : should be 0 (port subnodes). - -The GPIO controller has a configurable number of ports, each of which are -represented as child nodes with the following properties: - -Required properties: -- compatible : "snps,dw-apb-gpio-port" -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- reg : The integer port index of the port, a single cell. - -Optional properties: -- interrupt-controller : The first port may be configured to be an interrupt -controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt. Shall be set to 2. The first cell defines the interrupt number, - the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- interrupts : The interrupts to the parent controller raised when GPIOs - generate the interrupts. If the controller provides one combined interrupt - for all GPIOs, specify a single interrupt. If the controller provides one - interrupt for each GPIO, provide a list of interrupts that correspond to each - of the GPIO pins. When specifying multiple interrupts, if any are unconnected, - use the interrupts-extended property to specify the interrupts and set the - interrupt controller handle for unused interrupts to 0. -- snps,nr-gpios : The number of pins in the port, a single cell. -- resets : Reset line for the controller. - -Example: - -gpio: gpio@20000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x20000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - porta: gpio@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <8>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&vic1>; - interrupts = <0>; - }; - - portb: gpio@1 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <8>; - reg = <1>; - }; -}; |