diff options
Diffstat (limited to 'Documentation')
21 files changed, 248 insertions, 54 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index beb8ec4dabbc..5ecfd72ba684 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -188,6 +188,14 @@ Description: Indicates the interface unique physical port identifier within the NIC, as a string. +What: /sys/class/net/<iface>/phys_port_name +Date: March 2015 +KernelVersion: 4.0 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface physical port name within the NIC, + as a string. + What: /sys/class/net/<iface>/speed Date: October 2009 KernelVersion: 2.6.33 diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 5e9aeb91d355..0c0df91b1516 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -24,6 +24,14 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. +What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +Date: March 2015 +KernelVersion: 4.1 +Contact: netdev@vger.kernel.org +Description: + A Mbps max-rate set for the queue, a value of zero means disabled, + default is disabled. + What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus Date: November 2010 KernelVersion: 2.6.38 diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index 6151999c5dca..f55aa280d34f 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -14,7 +14,11 @@ Required properties for all the ethernet interfaces: - "enet_csr": Ethernet control and status register address space - "ring_csr": Descriptor ring control and status register address space - "ring_cmd": Descriptor ring command register address space -- interrupts: Ethernet main interrupt +- interrupts: Two interrupt specifiers can be specified. + - First is the Rx interrupt. This irq is mandatory. + - Second is the Tx completion interrupt. + This is supported only on SGMII based 1GbE and 10GbE interfaces. +- port-id: Port number (0 or 1) - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device - phy-connection-type: Interface type between ethernet device and PHY device @@ -49,6 +53,7 @@ Example: <0x0 0X10000000 0x0 0X200>; reg-names = "enet_csr", "ring_csr", "ring_cmd"; interrupts = <0x0 0x3c 0x4>; + port-id = <0>; clocks = <&menetclk 0>; local-mac-address = [00 01 73 00 00 01]; phy-connection-type = "rgmii"; diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index e124847443f8..f0b4cd72411d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4 (DSA_MAX_SWITCHES). Each of these switch child nodes should have the following required properties: -- reg : Describes the switch address on the MII bus +- reg : Contains two fields. The first one describes the + address on the MII bus. The second is the switch + number that must be unique in cascaded configurations - #address-cells : Must be 1 - #size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt index d3bbdded4cbe..168f1be50912 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt @@ -6,11 +6,14 @@ Required properties: - spi-max-frequency: maximal bus speed, should be set to 7500000 depends sync or async operation mode - reg: the chipselect index - - interrupts: the interrupt generated by the device + - interrupts: the interrupt generated by the device. Non high-level + can occur deadlocks while handling isr. Optional properties: - reset-gpio: GPIO spec for the rstn pin - sleep-gpio: GPIO spec for the slp_tr pin + - xtal-trim: u8 value for fine tuning the internal capacitance + arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF Example: @@ -18,6 +21,7 @@ Example: compatible = "atmel,at86rf231"; spi-max-frequency = <7500000>; reg = <0>; - interrupts = <19 1>; + interrupts = <19 4>; interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; }; diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt index 0071883c08d8..fb6d49f184ed 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt @@ -13,11 +13,15 @@ Required properties: - cca-gpio: GPIO spec for the CCA pin - vreg-gpio: GPIO spec for the VREG pin - reset-gpio: GPIO spec for the RESET pin +Optional properties: + - amplified: include if the CC2520 is connected to a CC2591 amplifier + Example: cc2520@0 { compatible = "ti,cc2520"; reg = <0>; spi-max-frequency = <4000000>; + amplified; pinctrl-names = "default"; pinctrl-0 = <&cc2520_cape_pins>; fifo-gpio = <&gpio1 18 0>; diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt index f9c07710478d..d0e6fa38f335 100644 --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt @@ -49,6 +49,7 @@ Required properties: - compatible: Should be "ti,netcp-1.0" - clocks: phandle to the reference clocks for the subsystem. - dma-id: Navigator packet dma instance id. +- ranges: address range of NetCP (includes, Ethernet SS, PA and SA) Optional properties: - reg: register location and the size for the following register @@ -64,10 +65,30 @@ NetCP device properties: Device specification for NetCP sub-modules. 1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications. Required properties: - label: Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb. +- compatible: Must be one of below:- + "ti,netcp-gbe" for 1GbE on NetCP 1.4 + "ti,netcp-gbe-5" for 1GbE N NetCP 1.5 (N=5) + "ti,netcp-gbe-9" for 1GbE N NetCP 1.5 (N=9) + "ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2) + "ti,netcp-xgbe" for 10 GbE + - reg: register location and the size for the following register regions in the specified order. - - subsystem registers - - serdes registers + - switch subsystem registers + - sgmii port3/4 module registers (only for NetCP 1.4) + - switch module registers + - serdes registers (only for 10G) + + NetCP 1.4 ethss, here is the order + index #0 - switch subsystem registers + index #1 - sgmii port3/4 module registers + index #2 - switch module registers + + NetCP 1.5 ethss 9 port, 5 port and 2 port + index #0 - switch subsystem registers + index #1 - switch module registers + index #2 - serdes registers + - tx-channel: the navigator packet dma channel name for tx. - tx-queue: the navigator queue number associated with the tx dma channel. - interfaces: specification for each of the switch port to be registered as a @@ -120,14 +141,13 @@ Optional properties: Example binding: -netcp: netcp@2090000 { +netcp: netcp@2000000 { reg = <0x2620110 0x8>; reg-names = "efuse"; compatible = "ti,netcp-1.0"; #address-cells = <1>; #size-cells = <1>; - ranges; - + ranges = <0 0x2000000 0xfffff>; clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; dma-coherent; /* big-endian; */ @@ -137,9 +157,9 @@ netcp: netcp@2090000 { #address-cells = <1>; #size-cells = <1>; ranges; - gbe@0x2090000 { + gbe@90000 { label = "netcp-gbe"; - reg = <0x2090000 0xf00>; + reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>; /* enable-ale; */ tx-queue = <648>; tx-channel = <8>; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index aaa696414f57..ba19d671e808 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -2,10 +2,13 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" - Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP + available on sama5d3 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". + Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. + Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs. - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index a63e5e013a8c..92ae734c00c3 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2 byte 4: 0 y6 y5 y4 y3 y2 y1 y0 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 +Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for +the DualPoint Stick. + Dualpoint device -- interleaved packet format --------------------------------------------- @@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format byte 7: 0 y6 y5 y4 y3 y2 y1 y0 byte 8: 0 z6 z5 z4 z3 z2 z1 z0 +Devices which use the interleaving format normally send standard PS/2 mouse +packets for the DualPoint Stick + ALPS Absolute Mode packets for the +touchpad, switching to the interleaved packet format when both the stick and +the touchpad are used at the same time. + ALPS Absolute Mode - Protocol Version 3 --------------------------------------- diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index c587a966413e..96705616f582 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. +INPUT_PROP_ACCELEROMETER +------------------------- +Directional axes on this device (absolute and/or relative x, y, z) represent +accelerometer data. All other axes retain their meaning. A device must not mix +regular directional axes and accelerometer axes on the same event node. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 7b4f59c09ee2..b85d000faeb4 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish between different tool types, such as a finger or a pen. In such cases, the -event should be omitted. The protocol currently supports MT_TOOL_FINGER and -MT_TOOL_PEN [2]. For type B devices, this event is handled by input core; -drivers should instead use input_mt_report_slot_state(). +event should be omitted. The protocol currently supports MT_TOOL_FINGER, +MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled +by input core; drivers should instead use input_mt_report_slot_state(). +A contact's ABS_MT_TOOL_TYPE may change over time while still touching the +device, because the firmware may not be able to determine which tool is being +used when it first appears. ABS_MT_BLOB_ID diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0a2859a8ee7e..5abad1e921ca 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -22,7 +22,8 @@ This file contains 4.1.3 RAW socket option CAN_RAW_LOOPBACK 4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS 4.1.5 RAW socket option CAN_RAW_FD_FRAMES - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + 4.1.7 RAW socket returned message flags 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.2.1 Broadcast Manager operations 4.2.2 Broadcast Manager message flags @@ -601,7 +602,22 @@ solution for a couple of reasons: CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU. The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + + The CAN_RAW socket can set multiple CAN identifier specific filters that + lead to multiple filters in the af_can.c filter processing. These filters + are indenpendent from each other which leads to logical OR'ed filters when + applied (see 4.1.1). + + This socket option joines the given CAN filters in the way that only CAN + frames are passed to user space that matched *all* given CAN filters. The + semantic for the applied filters is therefore changed to a logical AND. + + This is useful especially when the filterset is a combination of filters + where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or + CAN ID ranges from the incoming traffic. + + 4.1.7 RAW socket returned message flags When using recvmsg() call, the msg->msg_flags may contain following flags: diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 9930ecfbb465..135581f015e1 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -280,7 +280,8 @@ Possible BPF extensions are shown in the following table: rxhash skb->hash cpu raw_smp_processor_id() vlan_tci skb_vlan_tag_get(skb) - vlan_pr skb_vlan_tag_present(skb) + vlan_avail skb_vlan_tag_present(skb) + vlan_tpid skb->vlan_proto rand prandom_u32() These extensions can also be prefixed with '#'. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 1b8c964b0d17..071fb18dc57c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -388,6 +388,16 @@ tcp_mtu_probing - INTEGER 1 - Disabled by default, enabled when an ICMP black hole detected 2 - Always enabled, use initial MSS of tcp_base_mss. +tcp_probe_interval - INTEGER + Controls how often to start TCP Packetization-Layer Path MTU + Discovery reprobe. The default is reprobing every 10 minutes as + per RFC4821. + +tcp_probe_threshold - INTEGER + Controls when TCP Packetization-Layer Path MTU Discovery probing + will stop in respect to the width of search range in bytes. Default + is 8 bytes. + tcp_no_metrics_save - BOOLEAN By default, TCP saves various connection metrics in the route cache when the connection closes, so that connections established in the @@ -1116,11 +1126,23 @@ arp_accept - BOOLEAN gratuitous arp frame, the arp table will be updated regardless if this setting is on or off. +mcast_solicit - INTEGER + The maximum number of multicast probes in INCOMPLETE state, + when the associated hardware address is unknown. Defaults + to 3. + +ucast_solicit - INTEGER + The maximum number of unicast probes in PROBE state, when + the hardware address is being reconfirmed. Defaults to 3. app_solicit - INTEGER The maximum number of probes to send to the user space ARP daemon via netlink before dropping back to multicast probes (see - mcast_solicit). Defaults to 0. + mcast_resolicit). Defaults to 0. + +mcast_resolicit - INTEGER + The maximum number of multicast probes after unicast and + app probes in PROBE state. Defaults to 0. disable_policy - BOOLEAN Disable IPSEC policy (SPD) for this interface @@ -1198,6 +1220,17 @@ anycast_src_echo_reply - BOOLEAN FALSE: disabled Default: FALSE +idgen_delay - INTEGER + Controls the delay in seconds after which time to retry + privacy stable address generation if a DAD conflict is + detected. + Default: 1 (as specified in RFC7217) + +idgen_retries - INTEGER + Controls the number of retries to generate a stable privacy + address if a DAD conflict is detected. + Default: 3 (as specified in RFC7217) + mld_qrv - INTEGER Controls the MLD query robustness variable (see RFC3810 9.1). Default: 2 (as specified by RFC3810 9.1) @@ -1518,6 +1551,20 @@ use_optimistic - BOOLEAN 0: disabled (default) 1: enabled +stable_secret - IPv6 address + This IPv6 address will be used as a secret to generate IPv6 + addresses for link-local addresses and autoconfigured + ones. All addresses generated after setting this secret will + be stable privacy ones by default. This can be changed via the + addrgenmode ip-link. conf/default/stable_secret is used as the + secret for the namespace, the interface specific ones can + overwrite that. Writes to conf/all/stable_secret are refused. + + It is recommended to generate this secret during installation + of a system and keep it stable after that. + + By default the stable secret is unset. + icmp/*: ratelimit - INTEGER Limit the maximal rates for sending ICMPv6 packets. diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index 7a3c04729591..3ba709531adb 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -22,6 +22,27 @@ backup_only - BOOLEAN If set, disable the director function while the server is in backup mode to avoid packet loops for DR/TUN methods. +conn_reuse_mode - INTEGER + 1 - default + + Controls how ipvs will deal with connections that are detected + port reuse. It is a bitmap, with the values being: + + 0: disable any special handling on port reuse. The new + connection will be delivered to the same real server that was + servicing the previous connection. This will effectively + disable expire_nodest_conn. + + bit 1: enable rescheduling of new connections when it is safe. + That is, whenever expire_nodest_conn and for TCP sockets, when + the connection is in TIME_WAIT state (which is only possible if + you use NAT mode). + + bit 2: it is bit 1 plus, for TCP connections, when connections + are in FIN_WAIT state, as this is the last state seen by load + balancer in Direct Routing mode. This bit helps on adding new + real servers to a very busy cluster. + conntrack - BOOLEAN 0 - disabled (default) not 0 - enabled diff --git a/Documentation/networking/mpls-sysctl.txt b/Documentation/networking/mpls-sysctl.txt new file mode 100644 index 000000000000..639ddf0ece9b --- /dev/null +++ b/Documentation/networking/mpls-sysctl.txt @@ -0,0 +1,20 @@ +/proc/sys/net/mpls/* Variables: + +platform_labels - INTEGER + Number of entries in the platform label table. It is not + possible to configure forwarding for label values equal to or + greater than the number of platform labels. + + A dense utliziation of the entries in the platform label table + is possible and expected aas the platform labels are locally + allocated. + + If the number of platform label table entries is set to 0 no + label will be recognized by the kernel and mpls forwarding + will be disabled. + + Reducing this value will remove all label routing entries that + no longer fit in the table. + + Possible values: 0 - 1048575 + Default: 0 diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index a6d7cb91069e..daa015af16a0 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -440,9 +440,10 @@ and the following flags apply: +++ Capture process: from include/linux/if_packet.h - #define TP_STATUS_COPY 2 - #define TP_STATUS_LOSING 4 - #define TP_STATUS_CSUMNOTREADY 8 + #define TP_STATUS_COPY (1 << 1) + #define TP_STATUS_LOSING (1 << 2) + #define TP_STATUS_CSUMNOTREADY (1 << 3) + #define TP_STATUS_CSUM_VALID (1 << 7) TP_STATUS_COPY : This flag indicates that the frame (and associated meta information) has been truncated because it's @@ -466,6 +467,12 @@ TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which reading the packet we should not try to check the checksum. +TP_STATUS_CSUM_VALID : This flag indicates that at least the transport + header checksum of the packet has been already + validated on the kernel side. If the flag is not set + then we are free to check the checksum by ourselves + provided that TP_STATUS_CSUMNOTREADY is also not set. + for convenience there are also the following defines: #define TP_STATUS_KERNEL 0 diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 6915c6b27869..0344f1d45b37 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -3,13 +3,11 @@ HOWTO for the linux packet generator ------------------------------------ -Date: 041221 - -Enable CONFIG_NET_PKTGEN to compile and build pktgen.o either in kernel -or as module. Module is preferred. insmod pktgen if needed. Once running -pktgen creates a thread on each CPU where each thread has affinity to its CPU. -Monitoring and controlling is done via /proc. Easiest to select a suitable -a sample script and configure. +Enable CONFIG_NET_PKTGEN to compile and build pktgen either in-kernel +or as a module. A module is preferred; modprobe pktgen if needed. Once +running, pktgen creates a thread for each CPU with affinity to that CPU. +Monitoring and controlling is done via /proc. It is easiest to select a +suitable sample script and configure that. On a dual CPU: @@ -27,7 +25,7 @@ For monitoring and control pktgen creates: Tuning NIC for max performance ============================== -The default NIC setting are (likely) not tuned for pktgen's artificial +The default NIC settings are (likely) not tuned for pktgen's artificial overload type of benchmarking, as this could hurt the normal use-case. Specifically increasing the TX ring buffer in the NIC: @@ -35,20 +33,20 @@ Specifically increasing the TX ring buffer in the NIC: A larger TX ring can improve pktgen's performance, while it can hurt in the general case, 1) because the TX ring buffer might get larger -than the CPUs L1/L2 cache, 2) because it allow more queueing in the +than the CPU's L1/L2 cache, 2) because it allows more queueing in the NIC HW layer (which is bad for bufferbloat). -One should be careful to conclude, that packets/descriptors in the HW +One should hesitate to conclude that packets/descriptors in the HW TX ring cause delay. Drivers usually delay cleaning up the -ring-buffers (for various performance reasons), thus packets stalling -the TX ring, might just be waiting for cleanup. +ring-buffers for various performance reasons, and packets stalling +the TX ring might just be waiting for cleanup. -This cleanup issues is specifically the case, for the driver ixgbe -(Intel 82599 chip). This driver (ixgbe) combine TX+RX ring cleanups, +This cleanup issue is specifically the case for the driver ixgbe +(Intel 82599 chip). This driver (ixgbe) combines TX+RX ring cleanups, and the cleanup interval is affected by the ethtool --coalesce setting of parameter "rx-usecs". -For ixgbe use e.g "30" resulting in approx 33K interrupts/sec (1/30*10^6): +For ixgbe use e.g. "30" resulting in approx 33K interrupts/sec (1/30*10^6): # ethtool -C ethX rx-usecs 30 @@ -60,15 +58,16 @@ Running: Stopped: eth1 Result: OK: max_before_softirq=10000 -Most important the devices assigned to thread. Note! A device can only belong -to one thread. +Most important are the devices assigned to the thread. Note that a +device can only belong to one thread. Viewing devices =============== -Parm section holds configured info. Current hold running stats. -Result is printed after run or after interruption. Example: +The Params section holds configured information. The Current section +holds running statistics. The Result is printed after a run or after +interruption. Example: /proc/net/pktgen/eth1 @@ -93,7 +92,8 @@ Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags) Configuring threads and devices ================================ -This is done via the /proc interface easiest done via pgset in the scripts +This is done via the /proc interface, and most easily done via pgset +as defined in the sample scripts. Examples: @@ -192,10 +192,11 @@ Examples: pgset "rate 300M" set rate to 300 Mb/s pgset "ratep 1000000" set rate to 1Mpps -Example scripts -=============== +Sample scripts +============== -A collection of small tutorial scripts for pktgen is in examples dir. +A collection of small tutorial scripts for pktgen is in the +samples/pktgen directory: pktgen.conf-1-1 # 1 CPU 1 dev pktgen.conf-1-2 # 1 CPU 2 dev @@ -206,25 +207,26 @@ pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6 pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS pktgen.conf-1-1-flows # 1 CPU 1 dev multiple flows. -Run in shell: ./pktgen.conf-X-Y It does all the setup including sending. +Run in shell: ./pktgen.conf-X-Y +This does all the setup including sending. Interrupt affinity =================== -Note when adding devices to a specific CPU there good idea to also assign -/proc/irq/XX/smp_affinity so the TX-interrupts gets bound to the same CPU. -as this reduces cache bouncing when freeing skb's. +Note that when adding devices to a specific CPU it is a good idea to +also assign /proc/irq/XX/smp_affinity so that the TX interrupts are bound +to the same CPU. This reduces cache bouncing when freeing skbs. Enable IPsec ============ -Default IPsec transformation with ESP encapsulation plus Transport mode -could be enabled by simply setting: +Default IPsec transformation with ESP encapsulation plus transport mode +can be enabled by simply setting: pgset "flag IPSEC" pgset "flows 1" To avoid breaking existing testbed scripts for using AH type and tunnel mode, -user could use "pgset spi SPI_VALUE" to specify which formal of transformation +you can use "pgset spi SPI_VALUE" to specify which transformation mode to employ. diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index d2a9f43b5546..0362a42f7cf4 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -38,7 +38,7 @@ The corresponding adapter's LED will blink multiple times. 3. Features supported: a. Jumbo frames. Xframe I/II supports MTU up to 9600 bytes, -modifiable using ifconfig command. +modifiable using ip command. b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit and receive, TSO. diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 99ca40e8e810..cbfac0949635 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -421,6 +421,15 @@ best CPUs to share a given queue are probably those that share the cache with the CPU that processes transmit completions for that queue (transmit interrupts). +Per TX Queue rate limitation: +============================= + +These are rate-limitation mechanisms implemented by HW, where currently +a max-rate attribute is supported, by setting a Mbps value to + +/sys/class/net/<dev>/queues/tx-<n>/tx_maxrate + +A value of zero means disabled, and this is the default. Further Information =================== diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/vxge.txt index bb76c667a476..abfec245f97c 100644 --- a/Documentation/networking/vxge.txt +++ b/Documentation/networking/vxge.txt @@ -39,7 +39,7 @@ iii) PCI-SIG's I/O Virtualization iv) Jumbo frames X3100 Series supports MTU up to 9600 bytes, modifiable using - ifconfig command. + ip command. v) Offloads supported: (Enabled by default) Checksum offload (TCP/UDP/IP) on transmit and receive paths |