diff options
Diffstat (limited to 'Documentation')
6 files changed, 61 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt new file mode 100644 index 000000000000..31a629dc75b8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sprd.txt @@ -0,0 +1,11 @@ +Spreadtrum SoC Platforms Device Tree Bindings +---------------------------------------------------- + +Sharkl64 is a Spreadtrum's SoC Platform which is based +on ARM 64-bit processor. + +SC9836 openphone board with SC9836 SoC based on the +Sharkl64 Platform shall have the following properties. + +Required root node properties: + - compatible = "sprd,sc9836-openphone", "sprd,sc9836"; diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt new file mode 100644 index 000000000000..2d3ede66889d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt @@ -0,0 +1,27 @@ +Binding for Conexant Digicolor USART + +Note: this binding is only applicable for using the USART peripheral as +UART. USART also support synchronous serial protocols like SPI and I2S. Use +the binding that matches the wiring of your system. + +Required properties: +- compatible : should be "cnxt,cx92755-usart". +- reg: Should contain USART controller registers location and length. +- interrupts: Should contain a single USART controller interrupt. +- clocks: Must contain phandles to the USART clock + See ../clocks/clock-bindings.txt for details. + +Note: Each UART port should have an alias correctly numbered +in "aliases" node. + +Example: + aliases { + serial0 = &uart0; + }; + + uart0: uart@f0000740 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000740 0x20>; + clocks = <&main_clk>; + interrupts = <44>; + }; diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt index 3acdd969edf1..f0c39261c5d4 100644 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -2,7 +2,7 @@ Required properties: - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,marco-uart" or "sirf,marco-bt-uart" which means + "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means uart located in BT module and used for BT. - reg : Offset and length of the register set for the device - interrupts : Should contain uart interrupt @@ -37,7 +37,7 @@ usp@b0090000 { for uart use in BT module, uart6: uart@11000000 { cell-index = <6>; - compatible = "sirf,marco-bt-uart", "sirf,marco-uart"; + compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart"; reg = <0x11000000 0x1000>; interrupts = <0 100 0>; clocks = <&clks 138>, <&clks 140>, <&clks 141>; diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt new file mode 100644 index 000000000000..2aff0f22c9fa --- /dev/null +++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt @@ -0,0 +1,7 @@ +* Spreadtrum serial UART + +Required properties: +- compatible: must be "sprd,sc9836-uart" +- reg: offset and length of the register set for the device +- interrupts: exactly one interrupt specifier +- clocks: phandles to input clocks. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1eb6444a48c4..cba613f8aa4f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -37,6 +37,7 @@ chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. cirrus Cirrus Logic, Inc. cnm Chips&Media, Inc. +cnxt Conexant Systems, Inc. cortina Cortina Systems, Inc. cosmic Cosmic Circuits crystalfontz Crystalfontz America, Inc. @@ -162,6 +163,7 @@ snps Synopsys, Inc. solidrun SolidRun sony Sony Corporation spansion Spansion Inc. +sprd Spreadtrum Communications Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a89e32637570..bfcb1a62a7b4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -970,6 +970,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted. smh Use ARM semihosting calls for early console. + s3c2410,<addr> + s3c2412,<addr> + s3c2440,<addr> + s3c6400,<addr> + s5pv210,<addr> + exynos4210,<addr> + Use early console provided by serial driver available + on Samsung SoCs, requires selecting proper type and + a correct base address of the selected UART port. The + serial port must already be setup and configured. + Options are not yet supported. + earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] earlyprintk=vga earlyprintk=efi |