summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/device-drivers.tmpl10
-rw-r--r--Documentation/DocBook/drm.tmpl5
-rw-r--r--Documentation/devicetree/bindings/arm/arch_timer.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,kirkwood.txt97
-rw-r--r--Documentation/devicetree/bindings/ata/apm-xgene.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt16
-rw-r--r--Documentation/devicetree/bindings/mfd/mc13xxx.txt3
-rw-r--r--Documentation/devicetree/bindings/net/arc_emac.txt12
-rw-r--r--Documentation/devicetree/bindings/net/ethernet.txt2
-rw-r--r--Documentation/devicetree/bindings/net/socfpga-dwmac.txt2
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/efm32-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/ak4104.txt3
-rw-r--r--Documentation/devicetree/bindings/sound/alc5623.txt25
-rw-r--r--Documentation/devicetree/bindings/sound/cs42l56.txt63
-rw-r--r--Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/fsl-sai.txt11
-rw-r--r--Documentation/devicetree/bindings/sound/max98090.txt6
-rw-r--r--Documentation/devicetree/bindings/sound/max98095.txt22
-rw-r--r--Documentation/devicetree/bindings/sound/nokia,rx51.txt27
-rw-r--r--Documentation/devicetree/bindings/sound/renesas,rsnd.txt1
-rw-r--r--Documentation/devicetree/bindings/sound/rt5640.txt13
-rw-r--r--Documentation/devicetree/bindings/sound/snow.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/st,sta350.txt131
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic31xx.txt6
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt18
-rw-r--r--Documentation/input/elantech.txt5
-rw-r--r--Documentation/ja_JP/HOWTO2
-rw-r--r--Documentation/ja_JP/stable_kernel_rules.txt6
-rw-r--r--Documentation/kernel-parameters.txt13
-rw-r--r--Documentation/magic-number.txt12
-rw-r--r--Documentation/networking/scaling.txt2
-rw-r--r--Documentation/serial/00-INDEX8
-rw-r--r--Documentation/serial/digiepca.txt98
-rw-r--r--Documentation/serial/riscom8.txt36
-rw-r--r--Documentation/serial/specialix.txt383
-rw-r--r--Documentation/serial/sx.txt294
-rw-r--r--Documentation/stable_kernel_rules.txt2
-rw-r--r--Documentation/vm/numa_memory_policy.txt5
-rw-r--r--Documentation/zh_CN/HOWTO2
-rw-r--r--Documentation/zh_CN/io_ordering.txt67
-rw-r--r--Documentation/zh_CN/magic-number.txt12
-rw-r--r--Documentation/zh_CN/stable_kernel_rules.txt2
45 files changed, 562 insertions, 897 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index f5170082bdb3..cc63f30de166 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -276,7 +276,7 @@ X!Isound/sound_firmware.c
</para>
<sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
+!Edrivers/video/fbdev/core/fbmem.c
</sect1>
<!--
<sect1><title>Frame Buffer Console</title>
@@ -284,7 +284,7 @@ X!Edrivers/video/console/fbcon.c
</sect1>
-->
<sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
+!Edrivers/video/fbdev/core/fbcmap.c
</sect1>
<!-- FIXME:
drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
@@ -294,11 +294,11 @@ X!Idrivers/video/fbgen.c
</sect1>
KAO -->
<sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
+!Idrivers/video/fbdev/core/modedb.c
+!Edrivers/video/fbdev/core/modedb.c
</sect1>
<sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
+!Edrivers/video/fbdev/macmodes.c
</sect1>
<sect1><title>Frame Buffer Fonts</title>
<para>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 702c4474919c..677a02553ec0 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -2287,6 +2287,11 @@ void intel_crt_init(struct drm_device *dev)
!Edrivers/gpu/drm/drm_crtc_helper.c
</sect2>
<sect2>
+ <title>Output Probing Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_probe_helper.c output probing helper overview
+!Edrivers/gpu/drm/drm_probe_helper.c
+ </sect2>
+ <sect2>
<title>fbdev Helper Functions Reference</title>
!Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers
!Edrivers/gpu/drm/drm_fb_helper.c
diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index 06fc7602593a..37b2cafa4e52 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -19,6 +19,9 @@ to deliver its interrupts via SPIs.
- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- always-on : a boolean property. If present, the timer is powered through an
+ always-on power domain, therefore it never loses context.
+
Example:
timer {
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
new file mode 100644
index 000000000000..925ecbf6e7b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -0,0 +1,97 @@
+Marvell Kirkwood SoC Family Device Tree Bindings
+------------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
+
+* Required root node properties:
+compatible: must contain "marvell,kirkwood"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,kirkwood-88f6192"
+"marvell,kirkwood-88f6281"
+"marvell,kirkwood-88f6282"
+"marvell,kirkwood-88f6283"
+"marvell,kirkwood-88f6702"
+"marvell,kirkwood-98DX4122"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,lschlv2"
+"buffalo,lsxhl"
+"buffalo,lsxl"
+"dlink,dns-320"
+"dlink,dns-320-a1"
+"dlink,dns-325"
+"dlink,dns-325-a1"
+"dlink,dns-kirkwood"
+"excito,b3"
+"globalscale,dreamplug-003-ds2001"
+"globalscale,guruplug"
+"globalscale,guruplug-server-plus"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug-esata"
+"globalscale,sheevaplug-esata-rev13"
+"iom,iconnect"
+"iom,iconnect-1.1"
+"iom,ix2-200"
+"keymile,km_kirkwood"
+"lacie,cloudbox"
+"lacie,inetspace_v2"
+"lacie,laplug"
+"lacie,netspace_lite_v2"
+"lacie,netspace_max_v2"
+"lacie,netspace_mini_v2"
+"lacie,netspace_v2"
+"marvell,db-88f6281-bp"
+"marvell,db-88f6282-bp"
+"marvell,mv88f6281gtw-ge"
+"marvell,rd88f6281"
+"marvell,rd88f6281"
+"marvell,rd88f6281-a0"
+"marvell,rd88f6281-a1"
+"mpl,cec4"
+"mpl,cec4-10"
+"netgear,readynas"
+"netgear,readynas"
+"netgear,readynas-duo-v2"
+"netgear,readynas-nv+-v2"
+"plathome,openblocks-a6"
+"plathome,openblocks-a7"
+"raidsonic,ib-nas6210"
+"raidsonic,ib-nas6210-b"
+"raidsonic,ib-nas6220"
+"raidsonic,ib-nas6220-b"
+"raidsonic,ib-nas62x0"
+"seagate,dockstar"
+"seagate,goflexnet"
+"synology,ds109"
+"synology,ds110jv10"
+"synology,ds110jv20"
+"synology,ds110jv30"
+"synology,ds111"
+"synology,ds209"
+"synology,ds210jv10"
+"synology,ds210jv20"
+"synology,ds212"
+"synology,ds212jv10"
+"synology,ds212jv20"
+"synology,ds212pv10"
+"synology,ds409"
+"synology,ds409slim"
+"synology,ds410j"
+"synology,ds411"
+"synology,ds411j"
+"synology,ds411slim"
+"synology,ds413jv10"
+"synology,rs212"
+"synology,rs409"
+"synology,rs411"
+"synology,rs812"
+"usi,topkick"
+"usi,topkick-1281P2"
+"zyxel,nsa310"
+"zyxel,nsa310a"
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
index 7bcfbf59810e..a668f0e7d001 100644
--- a/Documentation/devicetree/bindings/ata/apm-xgene.txt
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -24,6 +24,7 @@ Required properties:
* "sata-phy" for the SATA 6.0Gbps PHY
Optional properties:
+- dma-coherent : Present if dma operations are coherent
- status : Shall be "ok" if enabled or "disabled" if disabled.
Default is "ok".
@@ -55,6 +56,7 @@ Example:
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy2 0>;
@@ -69,6 +71,7 @@ Example:
<0x0 0x1f23e000 0x0 0x1000>,
<0x0 0x1f237000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy3 0>;
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 71724d026ffa..bef86e57c388 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -13,8 +13,22 @@ ad,ad7414 SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert an
ad,adm9240 ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
adi,adt7461 +/-1C TDM Extended Temp Range I.C
adt7461 +/-1C TDM Extended Temp Range I.C
+adi,adt7473 +/-1C TDM Extended Temp Range I.C
+adi,adt7475 +/-1C TDM Extended Temp Range I.C
+adi,adt7476 +/-1C TDM Extended Temp Range I.C
+adi,adt7490 +/-1C TDM Extended Temp Range I.C
at,24c08 i2c serial eeprom (24cxx)
+atmel,24c00 i2c serial eeprom (24cxx)
+atmel,24c01 i2c serial eeprom (24cxx)
atmel,24c02 i2c serial eeprom (24cxx)
+atmel,24c04 i2c serial eeprom (24cxx)
+atmel,24c16 i2c serial eeprom (24cxx)
+atmel,24c32 i2c serial eeprom (24cxx)
+atmel,24c64 i2c serial eeprom (24cxx)
+atmel,24c128 i2c serial eeprom (24cxx)
+atmel,24c256 i2c serial eeprom (24cxx)
+atmel,24c512 i2c serial eeprom (24cxx)
+atmel,24c1024 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
catalyst,24c32 i2c serial eeprom
@@ -46,8 +60,10 @@ maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
mc,rv3029c2 Real Time Clock Module with I2C-Bus
+national,lm63 Temperature sensor with integrated fan control
national,lm75 I2C TEMP SENSOR
national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
+national,lm85 Temperature sensor with integrated fan control
national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
nuvoton,npct501 i2c trusted platform module (TPM)
nxp,pca9556 Octal SMBus and I2C registered interface
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 1413f39912d3..8aba48821a85 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -10,6 +10,9 @@ Optional properties:
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
Sub-nodes:
+- codec: Contain the Audio Codec node.
+ - adc-port: Contain PMIC SSI port number used for ADC.
+ - dac-port: Contain PMIC SSI port number used for DAC.
- leds : Contain the led nodes and initial register values in property
"led-control". Number of register depends of used IC, for MC13783 is 6,
for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
index 7fbb027218a1..a1d71eb43b20 100644
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ b/Documentation/devicetree/bindings/net/arc_emac.txt
@@ -4,11 +4,15 @@ Required properties:
- compatible: Should be "snps,arc-emac"
- reg: Address and length of the register set for the device
- interrupts: Should contain the EMAC interrupts
-- clock-frequency: CPU frequency. It is needed to calculate and set polling
-period of EMAC.
- max-speed: see ethernet.txt file in the same directory.
- phy: see ethernet.txt file in the same directory.
+Clock handling:
+The clock frequency is needed to calculate and set polling period of EMAC.
+It must be provided by one of:
+- clock-frequency: CPU frequency.
+- clocks: reference to the clock supplying the EMAC.
+
Child nodes of the driver are the individual PHY devices connected to the
MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
@@ -19,7 +23,11 @@ Examples:
reg = <0xc0fc2000 0x3c>;
interrupts = <6>;
mac-address = [ 00 11 22 33 44 55 ];
+
clock-frequency = <80000000>;
+ /* or */
+ clocks = <&emac_clock>;
+
max-speed = <100>;
phy = <&phy0>;
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 9ecd43d8792c..3fc360523bc9 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers:
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
the maximum frame size (there's contradiction in ePAPR).
- phy-mode: string, operation mode of the PHY interface; supported values are
- "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
+ "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
"rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
standard property;
- phy-connection-type: the same as "phy-mode" property but described in ePAPR;
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 636f0ac4e223..2a60cd3e8d5d 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 {
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac_0_clk>;
- clocks-names = "stmmaceth";
+ clock-names = "stmmaceth";
};
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 80c1fb8bfbb8..a2acd2b26baf 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -33,7 +33,7 @@ Optional properties:
- max-frame-size: See ethernet.txt file in the same directory
- clocks: If present, the first clock should be the GMAC main clock,
further clocks may be specified in derived bindings.
-- clocks-names: One name for each entry in the clocks property, the
+- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth".
Examples:
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index c119debe6bab..67a5db95f189 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
Example:
// pin controller node
pinctrl@35004800 {
- compatible = "brcmbcm11351-pinctrl";
+ compatible = "brcm,bcm11351-pinctrl";
reg = <0x35004800 0x430>;
// pin configuration node
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
index 4bd5be0e5e7d..26bcb18f4e60 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -83,7 +83,7 @@ Example:
reg = <0xfe61f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 {
@@ -165,7 +165,7 @@ sdhci0:sdhci@fe810000{
interrupt-parent = <&PIO3>;
#interrupt-cells = <2>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
- interrupts-names = "card-detect";
+ interrupt-names = "card-detect";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc>;
};
diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
index 1984bdfbd545..3ca01336b837 100644
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt
@@ -1,7 +1,7 @@
* Energymicro efm32 UART
Required properties:
-- compatible : Should be "efm32,uart"
+- compatible : Should be "energymicro,efm32-uart"
- reg : Address and length of the register set
- interrupts : Should contain uart interrupt
@@ -13,7 +13,7 @@ Optional properties:
Example:
uart@0x4000c400 {
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15>;
efm32,location = <0>;
diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt
index b902ee39cf89..deca5e18f304 100644
--- a/Documentation/devicetree/bindings/sound/ak4104.txt
+++ b/Documentation/devicetree/bindings/sound/ak4104.txt
@@ -8,6 +8,8 @@ Required properties:
- reg : The chip select number on the SPI bus
+ - vdd-supply : A regulator node, providing 2.7V - 3.6V
+
Optional properties:
- reset-gpio : a GPIO spec for the reset pin. If specified, it will be
@@ -19,4 +21,5 @@ spdif: ak4104@0 {
compatible = "asahi-kasei,ak4104";
reg = <0>;
spi-max-frequency = <5000000>;
+ vdd-supply = <&vdd_3v3_reg>;
};
diff --git a/Documentation/devicetree/bindings/sound/alc5623.txt b/Documentation/devicetree/bindings/sound/alc5623.txt
new file mode 100644
index 000000000000..26c86c98d671
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/alc5623.txt
@@ -0,0 +1,25 @@
+ALC5621/ALC5622/ALC5623 audio Codec
+
+Required properties:
+
+ - compatible: "realtek,alc5623"
+ - reg: the I2C address of the device.
+
+Optional properties:
+
+ - add-ctrl: Default register value for Reg-40h, Additional Control
+ Register. If absent or has the value of 0, the
+ register is untouched.
+
+ - jack-det-ctrl: Default register value for Reg-5Ah, Jack Detect
+ Control Register. If absent or has value 0, the
+ register is untouched.
+
+Example:
+
+ alc5621: alc5621@1a {
+ compatible = "alc5621";
+ reg = <0x1a>;
+ add-ctrl = <0x3700>;
+ jack-det-ctrl = <0x4810>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt
new file mode 100644
index 000000000000..4feb0eb27ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l56.txt
@@ -0,0 +1,63 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs42l56"
+
+ - reg : the I2C address of the device for I2C
+
+ - VA-supply, VCP-supply, VLDO-supply : power supplies for the device,
+ as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+ - cirrus,gpio-nreset : GPIO controller's phandle and the number
+ of the GPIO used to reset the codec.
+
+ - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+ Allowable values of 0x00 through 0x0F. These are raw values written to the
+ register, not the actual frequency. The frequency is determined by the following.
+ Frequency = MCLK / 4 * (N+2)
+ N = chgfreq_val
+ MCLK = Where MCLK is the frequency of the mclk signal after the MCLKDIV2 circuit.
+
+ - cirrus,ain1a-ref-cfg, ain1b-ref-cfg : boolean, If present, AIN1A or AIN1B are configured
+ as a pseudo-differential input referenced to AIN1REF/AIN3A.
+
+ - cirrus,ain2a-ref-cfg, ain2b-ref-cfg : boolean, If present, AIN2A or AIN2B are configured
+ as a pseudo-differential input referenced to AIN2REF/AIN3B.
+
+ - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin.
+ 0 = 0.5 x VA
+ 1 = 0.6 x VA
+ 2 = 0.7 x VA
+ 3 = 0.8 x VA
+ 4 = 0.83 x VA
+ 5 = 0.91 x VA
+
+ - cirrus,adaptive-pwr-cfg : Configures how the power to the Headphone and Lineout
+ Amplifiers adapt to the output signal levels.
+ 0 = Adapt to Volume Mode. Voltage level determined by the sum of the relevant volume settings.
+ 1 = Fixed - Headphone and Line Amp supply = + or - VCP/2.
+ 2 = Fixed - Headphone and Line Amp supply = + or - VCP.
+ 3 = Adapted to Signal; Voltage level is dynamically determined by the output signal.
+
+ - cirrus,hpf-left-freq, hpf-right-freq : Sets the corner frequency (-3dB point) for the internal High-Pass
+ Filter.
+ 0 = 1.8Hz
+ 1 = 119Hz
+ 2 = 236Hz
+ 3 = 464Hz
+
+
+Example:
+
+codec: codec@4b {
+ compatible = "cirrus,cs42l56";
+ reg = <0x4b>;
+ gpio-reset = <&gpio 10 0>;
+ cirrus,chgfreq-divisor = <0x05>;
+ cirrus.ain1_ref_cfg;
+ cirrus,micbias-lvl = <5>;
+ VA-supply = <&reg_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index 569b26c4a81e..60ca07996458 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -47,7 +47,7 @@ mcasp0: mcasp0@1d00000 {
reg = <0x100000 0x3000>;
reg-names "mpu";
interrupts = <82>, <83>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = <
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index 98611a6761c0..0f4e23828190 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -7,10 +7,11 @@ codec/DSP interfaces.
Required properties:
-- compatible: Compatible list, contains "fsl,vf610-sai".
+- compatible: Compatible list, contains "fsl,vf610-sai" or "fsl,imx6sx-sai".
- reg: Offset and length of the register set for the device.
- clocks: Must contain an entry for each entry in clock-names.
-- clock-names : Must include the "sai" entry.
+- clock-names : Must include the "bus" for register access and "mclk1" "mclk2"
+ "mclk3" for bit clock and frame clock providing.
- dmas : Generic dma devicetree binding as described in
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names : Two dmas have to be defined, "tx" and "rx".
@@ -30,8 +31,10 @@ sai2: sai@40031000 {
reg = <0x40031000 0x1000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2_1>;
- clocks = <&clks VF610_CLK_SAI2>;
- clock-names = "sai";
+ clocks = <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_SAI2>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
<&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index e4c8b36dcf89..a5e63fa47dc5 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -10,6 +10,12 @@ Required properties:
- interrupts : The CODEC's interrupt output.
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
Pins on the device (for linking into audio routes):
* MIC1
diff --git a/Documentation/devicetree/bindings/sound/max98095.txt b/Documentation/devicetree/bindings/sound/max98095.txt
new file mode 100644
index 000000000000..318a4c82f17f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98095.txt
@@ -0,0 +1,22 @@
+MAX98095 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98095".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
+Example:
+
+max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
new file mode 100644
index 000000000000..72f93d996273
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
@@ -0,0 +1,27 @@
+* Nokia N900 audio setup
+
+Required properties:
+- compatible: Should contain "nokia,n900-audio"
+- nokia,cpu-dai: phandle for the McBSP node
+- nokia,audio-codec: phandles for the main TLV320AIC3X node and the
+ auxiliary TLV320AIC3X node (in this order)
+- nokia,headphone-amplifier: phandle for the TPA6130A2 node
+- tvout-selection-gpios: GPIO for tvout selection
+- jack-detection-gpios: GPIO for jack detection
+- eci-switch-gpios: GPIO for ECI (Enhancement Control Interface) switch
+- speaker-amplifier-gpios: GPIO for speaker amplifier
+
+Example:
+
+sound {
+ compatible = "nokia,n900-audio";
+
+ nokia,cpu-dai = <&mcbsp2>;
+ nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+ nokia,headphone-amplifier = <&tpa6130a2>;
+
+ tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+ jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+ speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index a44e9179faf5..8346cab046cd 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -20,6 +20,7 @@ Required properties:
SSI subnode properties:
- interrupts : Should contain SSI interrupt for PIO transfer
- shared-pin : if shared clock pin
+- pio-transfer : use PIO transfer mode
SRC subnode properties:
no properties at this point
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index 068a1141b06f..bac4d9ac1edc 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -1,10 +1,10 @@
-RT5640 audio CODEC
+RT5640/RT5639 audio CODEC
This device supports I2C only.
Required properties:
-- compatible : "realtek,rt5640".
+- compatible : One of "realtek,rt5640" or "realtek,rt5639".
- reg : The I2C address of the device.
@@ -18,7 +18,7 @@ Optional properties:
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
-Pins on the device (for linking into audio routes):
+Pins on the device (for linking into audio routes) for RT5639/RT5640:
* DMIC1
* DMIC2
@@ -31,13 +31,16 @@ Pins on the device (for linking into audio routes):
* HPOR
* LOUTL
* LOUTR
- * MONOP
- * MONON
* SPOLP
* SPOLN
* SPORP
* SPORN
+Additional pins on the device for RT5640:
+
+ * MONOP
+ * MONON
+
Example:
rt5640 {
diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt
new file mode 100644
index 000000000000..678b191c37b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snow.txt
@@ -0,0 +1,17 @@
+Audio Binding for Snow boards
+
+Required properties:
+- compatible : Can be one of the following,
+ "google,snow-audio-max98090" or
+ "google,snow-audio-max98095"
+- samsung,i2s-controller: The phandle of the Samsung I2S controller
+- samsung,audio-codec: The phandle of the audio codec
+
+Example:
+
+sound {
+ compatible = "google,snow-audio-max98095";
+
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98095>;
+};
diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt
new file mode 100644
index 000000000000..b7e71bf5caf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sta350.txt
@@ -0,0 +1,131 @@
+STA350 audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+ - compatible: "st,sta350"
+ - reg: the I2C address of the device for I2C
+ - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+ deasserted before communication to the codec starts.
+
+ - power-down-gpios: a GPIO spec for the power down pin. If specified,
+ it will be deasserted before communication to the codec
+ starts.
+
+ - vdd-dig-supply: regulator spec, providing 3.3V
+ - vdd-pll-supply: regulator spec, providing 3.3V
+ - vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+ - st,output-conf: number, Selects the output configuration:
+ 0: 2-channel (full-bridge) power, 2-channel data-out
+ 1: 2 (half-bridge). 1 (full-bridge) on-board power
+ 2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+ 3: 1 Channel Mono-Parallel
+ If parameter is missing, mode 0 will be enabled.
+ This property has to be specified as '/bits/ 8' value.
+
+ - st,ch1-output-mapping: Channel 1 output mapping
+ - st,ch2-output-mapping: Channel 2 output mapping
+ - st,ch3-output-mapping: Channel 3 output mapping
+ 0: Channel 1
+ 1: Channel 2
+ 2: Channel 3
+ If parameter is missing, channel 1 is choosen.
+ This properties have to be specified as '/bits/ 8' values.
+
+ - st,thermal-warning-recover:
+ If present, thermal warning recovery is enabled.
+
+ - st,thermal-warning-adjustment:
+ If present, thermal warning adjustment is enabled.
+
+ - st,fault-detect-recovery:
+ If present, then fault recovery will be enabled.
+
+ - st,ffx-power-output-mode: string
+ The FFX power output mode selects how the FFX output timing is
+ configured. Must be one of these values:
+ - "drop-compensation"
+ - "tapered-compensation"
+ - "full-power-mode"
+ - "variable-drop-compensation" (default)
+
+ - st,drop-compensation-ns: number
+ Only required for "st,ffx-power-output-mode" ==
+ "variable-drop-compensation".
+ Specifies the drop compensation in nanoseconds.
+ The value must be in the range of 0..300, and only
+ multiples of 20 are allowed. Default is 140ns.
+
+ - st,overcurrent-warning-adjustment:
+ If present, overcurrent warning adjustment is enabled.
+
+ - st,max-power-use-mpcc:
+ If present, then MPCC bits are used for MPC coefficients,
+ otherwise standard MPC coefficients are used.
+
+ - st,max-power-corr:
+ If present, power bridge correction for THD reduction near maximum
+ power output is enabled.
+
+ - st,am-reduction-mode:
+ If present, FFX mode runs in AM reduction mode, otherwise normal
+ FFX mode is used.
+
+ - st,odd-pwm-speed-mode:
+ If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+ channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+ - st,distortion-compensation:
+ If present, distortion compensation variable uses DCC coefficient.
+ If not present, preset DC coefficient is used.
+
+ - st,invalid-input-detect-mute:
+ If present, automatic invalid input detect mute is enabled.
+
+ - st,activate-mute-output:
+ If present, a mute output will be activated in ase the volume will
+ reach a value lower than -76 dBFS.
+
+ - st,bridge-immediate-off:
+ If present, the bridge will be switched off immediately after the
+ power-down-gpio goes low. Otherwise, the bridge will wait for 13
+ million clock cycles to pass before shutting down.
+
+ - st,noise-shape-dc-cut:
+ If present, the noise-shaping technique on the DC cutoff filter are
+ enabled.
+
+ - st,powerdown-master-volume:
+ If present, the power-down pin and I2C power-down functions will
+ act on the master volume. Otherwise, the functions will act on the
+ mute commands.
+
+ - st,powerdown-delay-divider:
+ If present, the bridge power-down time will be divided by the provided
+ value. If not specified, a divider of 1 will be used. Allowed values
+ are 1, 2, 4, 8, 16, 32, 64 and 128.
+ This property has to be specified as '/bits/ 8' value.
+
+Example:
+
+codec: sta350@38 {
+ compatible = "st,sta350";
+ reg = <0x1c>;
+ reset-gpios = <&gpio1 19 0>;
+ power-down-gpios = <&gpio1 16 0>;
+ st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel
+ // (full-bridge) power,
+ // 2-channel data-out
+ st,ch1-output-mapping = /bits/ 8 <0>; // set channel 1 output ch 1
+ st,ch2-output-mapping = /bits/ 8 <0>; // set channel 2 output ch 1
+ st,ch3-output-mapping = /bits/ 8 <0>; // set channel 3 output ch 1
+ st,max-power-correction; // enables power bridge
+ // correction for THD reduction
+ // near maximum power output
+ st,invalid-input-detect-mute; // mute if no valid digital
+ // audio signal is provided.
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
index 74c66dee3e14..eff12be5e789 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -13,6 +13,9 @@ Required properties:
"ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
- reg - <int> - I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+ DVDD-supply : power supplies for the device as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
@@ -24,9 +27,6 @@ Optional properties:
3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
If this node is not mentioned or if the value is unknown, then
micbias is set to 2.0V.
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
- DVDD-supply : power supplies for the device as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
CODEC output pins:
* HPL
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0f01c9bf19c8..abc308083acb 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -22,6 +22,7 @@ auo AU Optronics Corporation
avago Avago Technologies
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
+buffalo Buffalo, Inc.
calxeda Calxeda
capella Capella Microsystems, Inc
cavium Cavium, Inc.
@@ -33,15 +34,18 @@ cortina Cortina Systems, Inc.
crystalfontz Crystalfontz America, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
-dlink D-Link Systems, Inc.
denx Denx Software Engineering
+digi Digi International Inc.
+dlink D-Link Corporation
dmo Data Modul AG
+ebv EBV Elektronik
edt Emerging Display Technologies
emmicro EM Microelectronic
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
eukrea Eukréa Electromatique
+excito Excito
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
@@ -53,13 +57,17 @@ haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
honeywell Honeywell
hp Hewlett Packard
+i2se I2SE GmbH
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
+iom Iomega Corporation
img Imagination Technologies Ltd.
intel Intel Corporation
intercontrol Inter Control Group
+isee ISEE 2007 S.L.
isl Intersil
karo Ka-Ro electronics GmbH
+keymile Keymile GmbH
lacie LaCie
lantiq Lantiq Semiconductor
lg LG Corporation
@@ -70,9 +78,12 @@ maxim Maxim Integrated Products
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
+mpl MPL AG
+mxicy Macronix International Co., Ltd.
national National Semiconductor
neonode Neonode Inc.
netgear NETGEAR
+newhaven Newhaven Display International
nintendo Nintendo
nokia Nokia
nvidia NVIDIA
@@ -82,10 +93,12 @@ opencores OpenCores.org
panasonic Panasonic Corporation
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
+plathome Plat'Home Co., Ltd.
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
qnap QNAP Systems, Inc.
+raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
@@ -95,6 +108,7 @@ rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sbs Smart Battery System
schindler Schindler
+seagate Seagate Technology PLC
sil Silicon Image
silabs Silicon Laboratories
simtek
@@ -111,6 +125,7 @@ ti Texas Instruments
tlm Trusted Logic Mobility
toshiba Toshiba Corporation
toumaz Toumaz
+usi Universal Scientifc Industrial Co., Ltd.
v3 V3 Semiconductor
via VIA Technologies, Inc.
voipac Voipac Technologies s.r.o.
@@ -119,3 +134,4 @@ wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
xes Extreme Engineering Solutions (X-ES)
xlnx Xilinx
+zyxel ZyXEL Communications Corp.
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index 5602eb71ad5d..e1ae127ed099 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -504,9 +504,12 @@ byte 5:
* reg_10
bit 7 6 5 4 3 2 1 0
- 0 0 0 0 0 0 0 A
+ 0 0 0 0 R F T A
A: 1 = enable absolute tracking
+ T: 1 = enable two finger mode auto correct
+ F: 1 = disable ABS Position Filter
+ R: 1 = enable real hardware resolution
6.2 Native absolute mode 6 byte packet format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 0091a8215ac1..b61885c35ce1 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -315,7 +315,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
最新の安定版カーネルです。
-3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+3.x.y は "stable" チーム <stable@vger.kernel.org> でメンテされており、必
要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
の場合はこれに対してだいたいの場合、すぐにリリースがされます。
diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt
index 14265837c4ce..9dbda9b5d21e 100644
--- a/Documentation/ja_JP/stable_kernel_rules.txt
+++ b/Documentation/ja_JP/stable_kernel_rules.txt
@@ -50,16 +50,16 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt
-stable ツリーにパッチを送付する手続き-
- - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ
+ - 上記の規則に従っているかを確認した後に、stable@vger.kernel.org にパッチ
を送る。
- 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合
には NAK を受け取る。この反応は開発者たちのスケジュールによって、数
日かかる場合がある。
- もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの
メンテナーによるレビューのために -stable キューに追加される。
- - パッチに stable@kernel.org のアドレスが付加されているときには、それ
+ - パッチに stable@vger.kernel.org のアドレスが付加されているときには、それ
が Linus のツリーに入る時に自動的に stable チームに email される。
- - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ
+ - セキュリティパッチはこのエイリアス (stable@vger.kernel.org) に送られるべ
きではなく、代わりに security@kernel.org のアドレスに送られる。
レビューサイクル-
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 03e50b4883a8..43842177b771 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
- digi= [HW,SERIAL]
- IO parameters + enable/disable command.
-
- digiepca= [HW,SERIAL]
- See drivers/char/README.epca and
- Documentation/serial/digiepca.txt.
-
disable= [IPV6]
See Documentation/networking/ipv6.txt.
@@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rhash_entries= [KNL,NET]
Set number of hash buckets for route cache
- riscom8= [HW,SERIAL]
- Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
-
ro [KNL] Mount root device read-only on boot
root= [KNL] Root filesystem
@@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt
- specialix= [HW,SERIAL] Specialix multi-serial port adapter
- See Documentation/serial/specialix.txt.
-
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=
diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt
index 76d80a64bbe1..4c8e142db2ef 100644
--- a/Documentation/magic-number.txt
+++ b/Documentation/magic-number.txt
@@ -63,8 +63,6 @@ Magic Name Number Structure File
PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h
CMAGIC 0x0111 user include/linux/a.out.h
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h
-RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h
-SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h
HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c
APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c
CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h
@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c
X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h
SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h
AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h
-ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h
TTY_MAGIC 0x5401 tty_struct include/linux/tty.h
MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c
TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h
@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h
-A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h
RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h
LSEMAGIC 0x05091998 lse drivers/fc4/fc.c
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h
RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c
-RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c
-SX_MAGIC 0x12345678 gs_port drivers/char/sx.h
NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h
RED_MAGIC2 0x170fc2a5 (any) mm/slab.c
BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c
@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h
CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c
ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h
SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c
-STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h
CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c
SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c
COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c
@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h
SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c
GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h
RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
-STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
-EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h
LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h
OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h
M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c
-STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h
VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c
KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c
PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h
NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h
-STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h
ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h
SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h
CODA_MAGIC 0xC0DAC0DA coda_file_info fs/coda/coda_fs_i.h
DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h
-STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h
YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c
CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c
QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index ca6977f5b2ed..99ca40e8e810 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -429,7 +429,7 @@ RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into
(therbert@google.com)
Accelerated RFS was introduced in 2.6.35. Original patches were
-submitted by Ben Hutchings (bhutchings@solarflare.com)
+submitted by Ben Hutchings (bwh@kernel.org)
Authors:
Tom Herbert (therbert@google.com)
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index f9c6b5ed03e7..8021a9f29fc5 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -2,23 +2,15 @@
- this file.
README.cycladesZ
- info on Cyclades-Z firmware loading.
-digiepca.txt
- - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
driver
- intro to the low level serial driver.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
n_gsm.txt
- GSM 0710 tty multiplexer howto.
-riscom8.txt
- - notes on using the RISCom/8 multi-port serial driver.
rocket.txt
- info on the Comtrol RocketPort multiport serial driver.
serial-rs485.txt
- info about RS485 structures and support in the kernel.
-specialix.txt
- - info on hardware/driver for specialix IO8+ multiport serial card.
-sx.txt
- - info on the Specialix SX/SI multiport serial driver.
tty.txt
- guide to the locking policies of the tty layer.
diff --git a/Documentation/serial/digiepca.txt b/Documentation/serial/digiepca.txt
deleted file mode 100644
index f2560e22f2c9..000000000000
--- a/Documentation/serial/digiepca.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at
-http://www.digi.com for PCI cards. They no longer maintain this driver,
-and have no 2.6 driver for ISA cards.
-
-This driver requires a number of user-space tools. They can be acquired from
-http://www.digi.com, but only works with 2.4 kernels.
-
-
-The Digi Intl. epca driver.
-----------------------------
-The Digi Intl. epca driver for Linux supports the following boards:
-
-Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve
-Digi EISA/Xem, PCI/Xem, PCI/Xr
-
-Limitations:
-------------
-Currently the driver only autoprobes for supported PCI boards.
-
-The Linux MAKEDEV command does not support generating the Digiboard
-Devices. Users executing digiConfig to setup EISA and PC series cards
-will have their device nodes automatically constructed (cud?? for ~CLOCAL,
-and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO
-prompt, or those users booting PCI cards may use buildDIGI to construct
-the necessary nodes.
-
-Notes:
-------
-This driver may be configured via LILO. For users who have already configured
-their driver using digiConfig, configuring from LILO will override previous
-settings. Multiple boards may be configured by issuing multiple LILO command
-lines. For examples see the bottom of this document.
-
-Device names start at 0 and continue up. Beware of this as previous Digi
-drivers started device names with 1.
-
-PCI boards are auto-detected and configured by the driver. PCI boards will
-be allocated device numbers (internally) beginning with the lowest PCI slot
-first. In other words a PCI card in slot 3 will always have higher device
-nodes than a PCI card in slot 1.
-
-LILO config examples:
----------------------
-Using LILO's APPEND command, a string of comma separated identifiers or
-integers can be used to configure supported boards. The six values in order
-are:
-
- Enable/Disable this card or Override,
- Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2),
- EISA/Xem (3), PC/64Xe (4), PC/Xi (5),
- Enable/Disable alternate pin arrangement,
- Number of ports on this card,
- I/O Port where card is configured (in HEX if using string identifiers),
- Base of memory window (in HEX if using string identifiers),
-
-NOTE : PCI boards are auto-detected and configured. Do not attempt to
-configure PCI boards with the LILO append command. If you wish to override
-previous configuration data (As set by digiConfig), but you do not wish to
-configure any specific card (Example if there are PCI cards in the system)
-the following override command will accomplish this:
--> append="digi=2"
-
-Samples:
- append="digiepca=E,PC/Xe,D,16,200,D0000"
- or
- append="digi=1,0,0,16,512,851968"
-
-Supporting Tools:
------------------
-Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See
-drivers/char/README.epca for more details. Note,
-this driver REQUIRES that digiDload be executed prior to it being used.
-Failure to do this will result in an ENODEV error.
-
-Documentation:
---------------
-Complete documentation for this product may be found in the tool package.
-
-Sources of information and support:
------------------------------------
-Digi Intl. support site for this product:
-
--> http://www.digi.com
-
-Acknowledgments:
-----------------
-Much of this work (And even text) was derived from a similar document
-supporting the original public domain DigiBoard driver Copyright (C)
-1994,1995 Troy De Jongh. Many thanks to Christoph Lameter
-(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored
-and contributed to the original document.
-
-Changelog:
-----------
-10-29-04: Update status of driver, remove dead links in document
- James Nelson <james4765@gmail.com>
-
-2000 (?) Original Document
diff --git a/Documentation/serial/riscom8.txt b/Documentation/serial/riscom8.txt
deleted file mode 100644
index 14f61fdad7ca..000000000000
--- a/Documentation/serial/riscom8.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* NOTE - this is an unmaintained driver. The original author cannot be located.
-
-SDL Communications is now SBS Technologies, and does not have any
-information on these ancient ISA cards on their website.
-
-James Nelson <james4765@gmail.com> - 12-12-2004
-
- This is the README for RISCom/8 multi-port serial driver
- (C) 1994-1996 D.Gorodchanin
- See file LICENSE for terms and conditions.
-
-NOTE: English is not my native language.
- I'm sorry for any mistakes in this text.
-
-Misc. notes for RISCom/8 serial driver, in no particular order :)
-
-1) This driver can support up to 4 boards at time.
- Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for
- setting I/O base addresses for boards. If you compile driver
- as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..."
-
-2) The driver partially supports famous 'setserial' program, you can use almost
- any of its options, excluding port & irq settings.
-
-3) There are some misc. defines at the beginning of riscom8.c, please read the
- comments and try to change some of them in case of problems.
-
-4) I consider the current state of the driver as BETA.
-
-5) SDL Communications WWW page is http://www.sdlcomm.com.
-
-6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries.
-
-7) Minor numbers for first board are 0-7, for second 8-15, etc.
-
-22 Apr 1996.
diff --git a/Documentation/serial/specialix.txt b/Documentation/serial/specialix.txt
deleted file mode 100644
index 6eb6f3a3331c..000000000000
--- a/Documentation/serial/specialix.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-
- specialix.txt -- specialix IO8+ multiport serial driver readme.
-
-
-
- Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
-
- Specialix pays for the development and support of this driver.
- Please DO contact io8-linux@specialix.co.uk if you require
- support.
-
- This driver was developed in the BitWizard linux device
- driver service. If you require a linux device driver for your
- product, please contact devices@BitWizard.nl for a quote.
-
- This code is firmly based on the riscom/8 serial driver,
- written by Dmitry Gorodchanin. The specialix IO8+ card
- programming information was obtained from the CL-CD1865 Data
- Book, and Specialix document number 6200059: IO8+ Hardware
- Functional Specification, augmented by document number 6200088:
- Merak Hardware Functional Specification. (IO8+/PCI is also
- called Merak)
-
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- PURPOSE. See the GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- USA.
-
-
-Intro
-=====
-
-
-This file contains some random information, that I like to have online
-instead of in a manual that can get lost. Ever misplace your Linux
-kernel sources? And the manual of one of the boards in your computer?
-
-
-Addresses and interrupts
-========================
-
-Address dip switch settings:
-The dip switch sets bits 2-9 of the IO address.
-
- 9 8 7 6 5 4 3 2
- +-----------------+
- 0 | X X X X X X X |
- | | = IoBase = 0x100
- 1 | X |
- +-----------------+ ------ RS232 connectors ---->
-
- | | |
- edge connector
- | | |
- V V V
-
-Base address 0x100 caused a conflict in one of my computers once. I
-haven't the foggiest why. My Specialix card is now at 0x180. My
-other computer runs just fine with the Specialix card at 0x100....
-The card occupies 4 addresses, but actually only two are really used.
-
-The PCI version doesn't have any dip switches. The BIOS assigns
-an IO address.
-
-The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If
-that causes trouble for you, please report that. I'll remove
-autoprobing then.
-
-The driver will tell the card what IRQ to use, so you don't have to
-change any jumpers to change the IRQ. Just use a command line
-argument (irq=xx) to the insmod program to set the interrupt.
-
-The BIOS assigns the IRQ on the PCI version. You have no say in what
-IRQ to use in that case.
-
-If your specialix cards are not at the default locations, you can use
-the kernel command line argument "specialix=io0,irq0,io1,irq1...".
-Here "io0" is the io address for the first card, and "irq0" is the
-irq line that the first card should use. And so on.
-
-Examples.
-
-You use the driver as a module and have three cards at 0x100, 0x250
-and 0x180. And some way or another you want them detected in that
-order. Moreover irq 12 is taken (e.g. by your PS/2 mouse).
-
- insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15
-
-The same three cards, but now in the kernel would require you to
-add
-
- specialix=0x100,9,0x250,11,0x180,15
-
-to the command line. This would become
-
- append="specialix=0x100,9,0x250,11,0x180,15"
-
-in your /etc/lilo.conf file if you use lilo.
-
-The Specialix driver is slightly odd: It allows you to have the second
-or third card detected without having a first card. This has
-advantages and disadvantages. A slot that isn't filled by an ISA card,
-might be filled if a PCI card is detected. Thus if you have an ISA
-card at 0x250 and a PCI card, you would get:
-
-sx0: specialix IO8+ Board at 0x100 not found.
-sx1: specialix IO8+ Board at 0x180 not found.
-sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B.
-sx3: specialix IO8+ Board at 0x260 not found.
-sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B.
-
-This would happen if you don't give any probe hints to the driver.
-If you would specify:
-
- specialix=0x250,11
-
-you'd get the following messages:
-
-sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B.
-sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B.
-
-ISA probing is aborted after the IO address you gave is exhausted, and
-the PCI card is now detected as the second card. The ISA card is now
-also forced to IRQ11....
-
-
-Baud rates
-==========
-
-The rev 1.2 and below boards use a CL-CD1864. These chips can only
-do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips
-are officially capable of 115k2.
-
-The Specialix card uses a 25MHz crystal (in times two mode, which in
-fact is a divided by two mode). This is not enough to reach the rated
-115k2 on all ports at the same time. With this clock rate you can only
-do 37% of this rate. This means that at 115k2 on all ports you are
-going to lose characters (The chip cannot handle that many incoming
-bits at this clock rate.) (Yes, you read that correctly: there is a
-limit to the number of -=bits=- per second that the chip can handle.)
-
-If you near the "limit" you will first start to see a graceful
-degradation in that the chip cannot keep the transmitter busy at all
-times. However with a central clock this slow, you can also get it to
-miss incoming characters. The driver will print a warning message when
-you are outside the official specs. The messages usually show up in
-the file /var/log/messages .
-
-The specialix card cannot reliably do 115k2. If you use it, you have
-to do "extensive testing" (*) to verify if it actually works.
-
-When "mgetty" communicates with my modem at 115k2 it reports:
-got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a]
- ^^^^ ^^^^ ^^^^
-
-The three characters that have the "^^^" under them have suffered a
-bit error in the highest bit. In conclusion: I've tested it, and found
-that it simply DOESN'T work for me. I also suspect that this is also
-caused by the baud rate being just a little bit out of tune.
-
-I upgraded the crystal to 66Mhz on one of my Specialix cards. Works
-great! Contact me for details. (Voids warranty, requires a steady hand
-and more such restrictions....)
-
-
-(*) Cirrus logic CD1864 databook, page 40.
-
-
-Cables for the Specialix IO8+
-=============================
-
-The pinout of the connectors on the IO8+ is:
-
- pin short direction long name
- name
- Pin 1 DCD input Data Carrier Detect
- Pin 2 RXD input Receive
- Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send
- Pin 4 GND - Ground
- Pin 5 TXD output Transmit
- Pin 6 CTS input Clear To Send
-
-
- -- 6 5 4 3 2 1 --
- | |
- | |
- | |
- | |
- +----- -----+
- |__________|
- clip
-
- Front view of an RJ12 connector. Cable moves "into" the paper.
- (the plug is ready to plug into your mouth this way...)
-
-
- NULL cable. I don't know who is going to use these except for
- testing purposes, but I tested the cards with this cable. (It
- took quite a while to figure out, so I'm not going to delete
- it. So there! :-)
-
-
- This end goes This end needs
- straight into the some twists in
- RJ12 plug. the wiring.
- IO8+ RJ12 IO8+ RJ12
- 1 DCD white -
- - - 1 DCD
- 2 RXD black 5 TXD
- 3 DTR/RTS red 6 CTS
- 4 GND green 4 GND
- 5 TXD yellow 2 RXD
- 6 CTS blue 3 DTR/RTS
-
-
- Same NULL cable, but now sorted on the second column.
-
- 1 DCD white -
- - - 1 DCD
- 5 TXD yellow 2 RXD
- 6 CTS blue 3 DTR/RTS
- 4 GND green 4 GND
- 2 RXD black 5 TXD
- 3 DTR/RTS red 6 CTS
-
-
-
- This is a modem cable usable for hardware handshaking:
- RJ12 DB25 DB9
- 1 DCD white 8 DCD 1 DCD
- 2 RXD black 3 RXD 2 RXD
- 3 DTR/RTS red 4 RTS 7 RTS
- 4 GND green 7 GND 5 GND
- 5 TXD yellow 2 TXD 3 TXD
- 6 CTS blue 5 CTS 8 CTS
- +---- 6 DSR 6 DSR
- +---- 20 DTR 4 DTR
-
- This is a modem cable usable for software handshaking:
- It allows you to reset the modem using the DTR ioctls.
- I (REW) have never tested this, "but xxxxxxxxxxxxx
- says that it works." If you test this, please
- tell me and I'll fill in your name on the xxx's.
-
- RJ12 DB25 DB9
- 1 DCD white 8 DCD 1 DCD
- 2 RXD black 3 RXD 2 RXD
- 3 DTR/RTS red 20 DTR 4 DTR
- 4 GND green 7 GND 5 GND
- 5 TXD yellow 2 TXD 3 TXD
- 6 CTS blue 5 CTS 8 CTS
- +---- 6 DSR 6 DSR
- +---- 4 RTS 7 RTS
-
- I bought a 6 wire flat cable. It was colored as indicated.
- Check that yours is the same before you trust me on this.
-
-
-Hardware handshaking issues.
-============================
-
-The driver can be told to operate in two different ways. The default
-behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
-hardware handshaking is off. It behaves as the RTS hardware
-handshaking signal when hardware handshaking is selected.
-
-When you use this, you have to use the appropriate cable. The
-cable will either be compatible with hardware handshaking or with
-software handshaking. So switching on the fly is not really an
-option.
-
-I actually prefer to use the "specialix.sx_rtscts=1" option.
-This makes the DTR/RTS pin always an RTS pin, and ioctls to
-change DTR are always ignored. I have a cable that is configured
-for this.
-
-
-Ports and devices
-=================
-
-Port 0 is the one furthest from the card-edge connector.
-
-Devices:
-
-You should make the devices as follows:
-
-bash
-cd /dev
-for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \
- 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
-do
- echo -n "$i "
- mknod /dev/ttyW$i c 75 $i
- mknod /dev/cuw$i c 76 $i
-done
-echo ""
-
-If your system doesn't come with these devices preinstalled, bug your
-linux-vendor about this. They have had ample time to get this
-implemented by now.
-
-You cannot have more than 4 boards in one computer. The card only
-supports 4 different interrupts. If you really want this, contact me
-about this and I'll give you a few tips (requires soldering iron)....
-
-If you have enough PCI slots, you can probably use more than 4 PCI
-versions of the card though....
-
-The PCI version of the card cannot adhere to the mechanical part of
-the PCI spec because the 8 serial connectors are simply too large. If
-it doesn't fit in your computer, bring back the card.
-
-
-------------------------------------------------------------------------
-
-
- Fixed bugs and restrictions:
- - During initialization, interrupts are blindly turned on.
- Having a shadow variable would cause an extra memory
- access on every IO instruction.
- - The interrupt (on the card) should be disabled when we
- don't allocate the Linux end of the interrupt. This allows
- a different driver/card to use it while all ports are not in
- use..... (a la standard serial port)
- == An extra _off variant of the sx_in and sx_out macros are
- now available. They don't set the interrupt enable bit.
- These are used during initialization. Normal operation uses
- the old variant which enables the interrupt line.
- - RTS/DTR issue needs to be implemented according to
- specialix' spec.
- I kind of like the "determinism" of the current
- implementation. Compile time flag?
- == Ok. Compile time flag! Default is how Specialix likes it.
- == Now a config time flag! Gets saved in your config file. Neat!
- - Can you set the IO address from the lilo command line?
- If you need this, bug me about it, I'll make it.
- == Hah! No bugging needed. Fixed! :-)
- - Cirrus logic hasn't gotten back to me yet why the CD1865 can
- and the CD1864 can't do 115k2. I suspect that this is
- because the CD1864 is not rated for 33MHz operation.
- Therefore the CD1864 versions of the card can't do 115k2 on
- all ports just like the CD1865 versions. The driver does
- not block 115k2 on CD1864 cards.
- == I called the Cirrus Logic representative here in Holland.
- The CD1864 databook is identical to the CD1865 databook,
- except for an extra warning at the end. Similar Bit errors
- have been observed in testing at 115k2 on both an 1865 and
- a 1864 chip. I see no reason why I would prohibit 115k2 on
- 1864 chips and not do it on 1865 chips. Actually there is
- reason to prohibit it on BOTH chips. I print a warning.
- If you use 115k2, you're on your own.
- - A spiky CD may send spurious HUPs. Also in CLOCAL???
- -- A fix for this turned out to be counter productive.
- Different fix? Current behaviour is acceptable?
- -- Maybe the current implementation is correct. If anybody
- gets bitten by this, please report, and it will get fixed.
-
- -- Testing revealed that when in CLOCAL, the problem doesn't
- occur. As warned for in the CD1865 manual, the chip may
- send modem intr's on a spike. We could filter those out,
- but that would be a cludge anyway (You'd still risk getting
- a spurious HUP when two spikes occur.).....
-
-
-
- Bugs & restrictions:
- - This is a difficult card to autoprobe.
- You have to WRITE to the address register to even
- read-probe a CD186x register. Disable autodetection?
- -- Specialix: any suggestions?
-
-
diff --git a/Documentation/serial/sx.txt b/Documentation/serial/sx.txt
deleted file mode 100644
index cb4efa0fb5cc..000000000000
--- a/Documentation/serial/sx.txt
+++ /dev/null
@@ -1,294 +0,0 @@
-
- sx.txt -- specialix SX/SI multiport serial driver readme.
-
-
-
- Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
-
- Specialix pays for the development and support of this driver.
- Please DO contact support@specialix.co.uk if you require
- support.
-
- This driver was developed in the BitWizard linux device
- driver service. If you require a linux device driver for your
- product, please contact devices@BitWizard.nl for a quote.
-
- (History)
- There used to be an SI driver by Simon Allan. This is a complete
- rewrite from scratch. Just a few lines-of-code have been snatched.
-
- (Sources)
- Specialix document number 6210028: SX Host Card and Download Code
- Software Functional Specification.
-
- (Copying)
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- PURPOSE. See the GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- USA.
-
- (Addendum)
- I'd appreciate it that if you have fixes, that you send them
- to me first.
-
-
-Introduction
-============
-
-This file contains some random information, that I like to have online
-instead of in a manual that can get lost. Ever misplace your Linux
-kernel sources? And the manual of one of the boards in your computer?
-
-
-Theory of operation
-===================
-
-An important thing to know is that the driver itself doesn't have the
-firmware for the card. This means that you need the separate package
-"sx_firmware". For now you can get the source at
-
- ftp://ftp.bitwizard.nl/specialix/sx_firmware_<version>.tgz
-
-The firmware load needs a "misc" device, so you'll need to enable the
-"Support for user misc device modules" in your kernel configuration.
-The misc device needs to be called "/dev/specialix_sxctl". It needs
-misc major 10, and minor number 167 (assigned by HPA). The section
-on creating device files below also creates this device.
-
-After loading the sx.o module into your kernel, the driver will report
-the number of cards detected, but because it doesn't have any
-firmware, it will not be able to determine the number of ports. Only
-when you then run "sx_firmware" will the firmware be downloaded and
-the rest of the driver initialized. At that time the sx_firmware
-program will report the number of ports installed.
-
-In contrast with many other multi port serial cards, some of the data
-structures are only allocated when the card knows the number of ports
-that are connected. This means we won't waste memory for 120 port
-descriptor structures when you only have 8 ports. If you experience
-problems due to this, please report them: I haven't seen any.
-
-
-Interrupts
-==========
-
-A multi port serial card, would generate a horrendous amount of
-interrupts if it would interrupt the CPU for every received
-character. Even more than 10 years ago, the trick not to use
-interrupts but to poll the serial cards was invented.
-
-The SX card allow us to do this two ways. First the card limits its
-own interrupt rate to a rate that won't overwhelm the CPU. Secondly,
-we could forget about the cards interrupt completely and use the
-internal timer for this purpose.
-
-Polling the card can take up to a few percent of your CPU. Using the
-interrupts would be better if you have most of the ports idle. Using
-timer-based polling is better if your card almost always has work to
-do. You save the separate interrupt in that case.
-
-In any case, it doesn't really matter all that much.
-
-The most common problem with interrupts is that for ISA cards in a PCI
-system the BIOS has to be told to configure that interrupt as "legacy
-ISA". Otherwise the card can pull on the interrupt line all it wants
-but the CPU won't see this.
-
-If you can't get the interrupt to work, remember that polling mode is
-more efficient (provided you actually use the card intensively).
-
-
-Allowed Configurations
-======================
-
-Some configurations are disallowed. Even though at a glance they might
-seem to work, they are known to lockup the bus between the host card
-and the device concentrators. You should respect the drivers decision
-not to support certain configurations. It's there for a reason.
-
-Warning: Seriously technical stuff ahead. Executive summary: Don't use
-SX cards except configured at a 64k boundary. Skip the next paragraph.
-
-The SX cards can theoretically be placed at a 32k boundary. So for
-instance you can put an SX card at 0xc8000-0xd7fff. This is not a
-"recommended configuration". ISA cards have to tell the bus controller
-how they like their timing. Due to timing issues they have to do this
-based on which 64k window the address falls into. This means that the
-32k window below and above the SX card have to use exactly the same
-timing as the SX card. That reportedly works for other SX cards. But
-you're still left with two useless 32k windows that should not be used
-by anybody else.
-
-
-Configuring the driver
-======================
-
-PCI cards are always detected. The driver auto-probes for ISA cards at
-some sensible addresses. Please report if the auto-probe causes trouble
-in your system, or when a card isn't detected.
-
-I'm afraid I haven't implemented "kernel command line parameters" yet.
-This means that if the default doesn't work for you, you shouldn't use
-the compiled-into-the-kernel version of the driver. Use a module
-instead. If you convince me that you need this, I'll make it for
-you. Deal?
-
-I'm afraid that the module parameters are a bit clumsy. If you have a
-better idea, please tell me.
-
-You can specify several parameters:
-
- sx_poll: number of jiffies between timer-based polls.
-
- Set this to "0" to disable timer based polls.
- Initialization of cards without a working interrupt
- will fail.
-
- Set this to "1" if you want a polling driver.
- (on Intel: 100 polls per second). If you don't use
- fast baud rates, you might consider a value like "5".
- (If you don't know how to do the math, use 1).
-
- sx_slowpoll: Number of jiffies between timer-based polls.
- Set this to "100" to poll once a second.
- This should get the card out of a stall if the driver
- ever misses an interrupt. I've never seen this happen,
- and if it does, that's a bug. Tell me.
-
- sx_maxints: Number of interrupts to request from the card.
- The card normally limits interrupts to about 100 per
- second to offload the host CPU. You can increase this
- number to reduce latency on the card a little.
- Note that if you give a very high number you can overload
- your CPU as well as the CPU on the host card. This setting
- is inaccurate and not recommended for SI cards (But it
- works).
-
- sx_irqmask: The mask of allowable IRQs to use. I suggest you set
- this to 0 (disable IRQs all together) and use polling if
- the assignment of IRQs becomes problematic. This is defined
- as the sum of (1 << irq) 's that you want to allow. So
- sx_irqmask of 8 (1 << 3) specifies that only irq 3 may
- be used by the SX driver. If you want to specify to the
- driver: "Either irq 11 or 12 is ok for you to use", then
- specify (1 << 11) | (1 << 12) = 0x1800 .
-
- sx_debug: You can enable different sorts of debug traces with this.
- At "-1" all debugging traces are active. You'll get several
- times more debugging output than you'll get characters
- transmitted.
-
-
-Baud rates
-==========
-
-Theoretically new SXDCs should be capable of more than 460k
-baud. However the line drivers usually give up before that. Also the
-CPU on the card may not be able to handle 8 channels going at full
-blast at that speed. Moreover, the buffers are not large enough to
-allow operation with 100 interrupts per second. You'll have to realize
-that the card has a 256 byte buffer, so you'll have to increase the
-number of interrupts per second if you have more than 256*100 bytes
-per second to transmit. If you do any performance testing in this
-area, I'd be glad to hear from you...
-
-(Psst Linux users..... I think the Linux driver is more efficient than
-the driver for other OSes. If you can and want to benchmark them
-against each other, be my guest, and report your findings...... :-)
-
-
-Ports and devices
-=================
-
-Port 0 is the top connector on the module closest to the host
-card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8
-instead of from 0 to 7, as they are numbered by linux. I'm stubborn in
-this: I know for sure that I wouldn't be able to calculate which port
-is which anymore if I would change that....
-
-
-Devices:
-
-You should make the device files as follows:
-
-#!/bin/sh
-# (I recommend that you cut-and-paste this into a file and run that)
-cd /dev
-t=0
-mknod specialix_sxctl c 10 167
-while [ $t -lt 64 ]
- do
- echo -n "$t "
- mknod ttyX$t c 32 $t
- mknod cux$t c 33 $t
- t=`expr $t + 1`
-done
-echo ""
-rm /etc/psdevtab
-ps > /dev/null
-
-
-This creates 64 devices. If you have more, increase the constant on
-the line with "while". The devices start at 0, as is customary on
-Linux. Specialix seems to like starting the numbering at 1.
-
-If your system doesn't come with these devices pre-installed, bug your
-linux-vendor about this. They should have these devices
-"pre-installed" before the new millennium. The "ps" stuff at the end
-is to "tell" ps that the new devices exist.
-
-Officially the maximum number of cards per computer is 4. This driver
-however supports as many cards in one machine as you want. You'll run
-out of interrupts after a few, but you can switch to polled operation
-then. At about 256 ports (More than 8 cards), we run out of minor
-device numbers. Sorry. I suggest you buy a second computer.... (Or
-switch to RIO).
-
-------------------------------------------------------------------------
-
-
- Fixed bugs and restrictions:
- - Hangup processing.
- -- Done.
-
- - the write path in generic_serial (lockup / oops).
- -- Done (Ugly: not the way I want it. Copied from serial.c).
-
- - write buffer isn't flushed at close.
- -- Done. I still seem to lose a few chars at close.
- Sorry. I think that this is a firmware issue. (-> Specialix)
-
- - drain hardware before changing termios
- - Change debug on the fly.
- - ISA free irq -1. (no firmware loaded).
- - adding c8000 as a probe address. Added warning.
- - Add a RAMtest for the RAM on the card.c
- - Crash when opening a port "way" of the number of allowed ports.
- (for example opening port 60 when there are only 24 ports attached)
- - Sometimes the use-count strays a bit. After a few hours of
- testing the use count is sometimes "3". If you are not like
- me and can remember what you did to get it that way, I'd
- appreciate an Email. Possibly fixed. Tell me if anyone still
- sees this.
- - TAs don't work right if you don't connect all the modem control
- signals. SXDCs do. T225 firmware problem -> Specialix.
- (Mostly fixed now, I think. Tell me if you encounter this!)
-
- Bugs & restrictions:
-
- - Arbitrary baud rates. Requires firmware update. (-> Specialix)
-
- - Low latency (mostly firmware, -> Specialix)
-
-
-
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index b0714d8f678a..cbc2f03056bd 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -39,7 +39,7 @@ Procedure for submitting patches to the -stable tree:
the stable tree without anything else needing to be done by the author
or subsystem maintainer.
- If the patch requires other patches as prerequisites which can be
- cherry-picked than this can be specified in the following format in
+ cherry-picked, then this can be specified in the following format in
the sign-off area:
Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index 4e7da6543424..badb0507608f 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -174,7 +174,6 @@ Components of Memory Policies
allocation fails, the kernel will search other nodes, in order of
increasing distance from the preferred node based on information
provided by the platform firmware.
- containing the cpu where the allocation takes place.
Internally, the Preferred policy uses a single node--the
preferred_node member of struct mempolicy. When the internal
@@ -275,9 +274,9 @@ Components of Memory Policies
For example, consider a task that is attached to a cpuset with
mems 2-5 that sets an Interleave policy over the same set with
MPOL_F_RELATIVE_NODES. If the cpuset's mems change to 3-7, the
- interleave now occurs over nodes 3,5-6. If the cpuset's mems
+ interleave now occurs over nodes 3,5-7. If the cpuset's mems
then change to 0,2-3,5, then the interleave occurs over nodes
- 0,3,5.
+ 0,2-3,5.
Thanks to the consistent remapping, applications preparing
nodemasks to specify memory policies using this flag should
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 6c914aa87e71..54ea24ff63c7 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -237,7 +237,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循
如果没有2.6.x.y版本内核存在,那么最新的2.6.x版本内核就相当于是当前的稳定
版内核。
-2.6.x.y版本由“稳定版”小组(邮件地址<stable@kernel.org>)维护,一般隔周发
+2.6.x.y版本由“稳定版”小组(邮件地址<stable@vger.kernel.org>)维护,一般隔周发
布新版本。
内核源码中的Documentation/stable_kernel_rules.txt文件具体描述了可被稳定
diff --git a/Documentation/zh_CN/io_ordering.txt b/Documentation/zh_CN/io_ordering.txt
new file mode 100644
index 000000000000..e592daf4e014
--- /dev/null
+++ b/Documentation/zh_CN/io_ordering.txt
@@ -0,0 +1,67 @@
+Chinese translated version of Documentation/io_orderings.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Chinese maintainer: Lin Yongting <linyongting@gmail.com>
+---------------------------------------------------------------------
+Documentation/io_ordering.txt 的中文翻译
+
+如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
+交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题,请联系中文版维护者。
+
+中文版维护者: 林永听 Lin Yongting <linyongting@gmail.com>
+中文版翻译者: 林永听 Lin Yongting <linyongting@gmail.com>
+中文版校译者: 林永听 Lin Yongting <linyongting@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+
+在某些平台上,所谓的内存映射I/O是弱顺序。在这些平台上,驱动开发者有责任
+保证I/O内存映射地址的写操作按程序图意的顺序达到设备。通常读取一个“安全”
+设备寄存器或桥寄存器,触发IO芯片清刷未处理的写操作到达设备后才处理读操作,
+而达到保证目的。驱动程序通常在spinlock保护的临界区退出之前使用这种技术。
+这也可以保证后面的写操作只在前面的写操作之后到达设备(这非常类似于内存
+屏障操作,mb(),不过仅适用于I/O)。
+
+假设一个设备驱动程的具体例子:
+
+ ...
+CPU A: spin_lock_irqsave(&dev_lock, flags)
+CPU A: val = readl(my_status);
+CPU A: ...
+CPU A: writel(newval, ring_ptr);
+CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+CPU B: spin_lock_irqsave(&dev_lock, flags)
+CPU B: val = readl(my_status);
+CPU B: ...
+CPU B: writel(newval2, ring_ptr);
+CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+
+上述例子中,设备可能会先接收到newval2的值,然后接收到newval的值,问题就
+发生了。不过很容易通过下面方法来修复:
+
+ ...
+CPU A: spin_lock_irqsave(&dev_lock, flags)
+CPU A: val = readl(my_status);
+CPU A: ...
+CPU A: writel(newval, ring_ptr);
+CPU A: (void)readl(safe_register); /* 配置寄存器?*/
+CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+CPU B: spin_lock_irqsave(&dev_lock, flags)
+CPU B: val = readl(my_status);
+CPU B: ...
+CPU B: writel(newval2, ring_ptr);
+CPU B: (void)readl(safe_register); /* 配置寄存器?*/
+CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+
+在解决方案中,读取safe_register寄存器,触发IO芯片清刷未处理的写操作,
+再处理后面的读操作,防止引发数据不一致问题。
diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt
index 2ebe539f5450..dfb72a5c63e9 100644
--- a/Documentation/zh_CN/magic-number.txt
+++ b/Documentation/zh_CN/magic-number.txt
@@ -63,8 +63,6 @@ struct tty_ldisc {
PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h
CMAGIC 0x0111 user include/linux/a.out.h
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h
-RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h
-SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h
HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c
APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c
CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h
@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c
X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h
SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h
AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h
-ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h
TTY_MAGIC 0x5401 tty_struct include/linux/tty.h
MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c
TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h
@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h
-A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h
RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h
LSEMAGIC 0x05091998 lse drivers/fc4/fc.c
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h
RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c
-RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c
-SX_MAGIC 0x12345678 gs_port drivers/char/sx.h
NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h
RED_MAGIC2 0x170fc2a5 (any) mm/slab.c
BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c
@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h
CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c
ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h
SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c
-STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h
CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c
SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c
COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c
@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h
SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c
GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h
RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
-STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
-EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h
LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h
OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h
M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c
-STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h
VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c
KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c
PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h
NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h
-STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h
ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h
SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h
CODA_MAGIC 0xC0DAC0DA coda_file_info include/linux/coda_fs_i.h
DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h
-STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h
YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c
CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c
QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c
diff --git a/Documentation/zh_CN/stable_kernel_rules.txt b/Documentation/zh_CN/stable_kernel_rules.txt
index b5b9b0ab02fd..26ea5ed7cd9c 100644
--- a/Documentation/zh_CN/stable_kernel_rules.txt
+++ b/Documentation/zh_CN/stable_kernel_rules.txt
@@ -42,7 +42,7 @@ Documentation/stable_kernel_rules.txt 的中文翻译
向稳定版代码树提交补丁的过程:
- - 在确认了补丁符合以上的规则后,将补丁发送到stable@kernel.org。
+ - 在确认了补丁符合以上的规则后,将补丁发送到stable@vger.kernel.org。
- 如果补丁被接受到队列里,发送者会收到一个ACK回复,如果没有被接受,收
到的是NAK回复。回复需要几天的时间,这取决于开发者的时间安排。
- 被接受的补丁会被加到稳定版本队列里,等待其他开发者的审查。