summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-block64
-rw-r--r--Documentation/ABI/testing/sysfs-ptp98
-rw-r--r--Documentation/IRQ-affinity.txt17
-rw-r--r--Documentation/blockdev/cciss.txt15
-rw-r--r--Documentation/cachetlb.txt2
-rw-r--r--Documentation/devicetree/bindings/net/fsl-tsec-phy.txt54
-rw-r--r--Documentation/filesystems/9p.txt29
-rw-r--r--Documentation/filesystems/proc.txt11
-rw-r--r--Documentation/kernel-parameters.txt3
-rw-r--r--Documentation/lockstat.txt2
-rw-r--r--Documentation/ptp/ptp.txt89
-rw-r--r--Documentation/ptp/testptp.c381
-rw-r--r--Documentation/ptp/testptp.mk33
-rw-r--r--Documentation/virtual/uml/UserModeLinux-HOWTO.txt10
-rw-r--r--Documentation/vm/locking2
15 files changed, 779 insertions, 31 deletions
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 4873c759d535..c1eb41cb9876 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -142,3 +142,67 @@ Description:
with the previous I/O request are enabled. When set to 2,
all merge tries are disabled. The default value is 0 -
which enables all types of merge tries.
+
+What: /sys/block/<disk>/discard_alignment
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may
+ internally allocate space in units that are bigger than
+ the exported logical block size. The discard_alignment
+ parameter indicates how many bytes the beginning of the
+ device is offset from the internal allocation unit's
+ natural alignment.
+
+What: /sys/block/<disk>/<partition>/discard_alignment
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may
+ internally allocate space in units that are bigger than
+ the exported logical block size. The discard_alignment
+ parameter indicates how many bytes the beginning of the
+ partition is offset from the internal allocation unit's
+ natural alignment.
+
+What: /sys/block/<disk>/queue/discard_granularity
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may
+ internally allocate space using units that are bigger
+ than the logical block size. The discard_granularity
+ parameter indicates the size of the internal allocation
+ unit in bytes if reported by the device. Otherwise the
+ discard_granularity will be set to match the device's
+ physical block size. A discard_granularity of 0 means
+ that the device does not support discard functionality.
+
+What: /sys/block/<disk>/queue/discard_max_bytes
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may have
+ internal limits on the number of bytes that can be
+ trimmed or unmapped in a single operation. Some storage
+ protocols also have inherent limits on the number of
+ blocks that can be described in a single command. The
+ discard_max_bytes parameter is set by the device driver
+ to the maximum number of bytes that can be discarded in
+ a single operation. Discard requests issued to the
+ device must not exceed this limit. A discard_max_bytes
+ value of 0 means that the device does not support
+ discard functionality.
+
+What: /sys/block/<disk>/queue/discard_zeroes_data
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may return
+ stale or random data when a previously discarded block
+ is read back. This can cause problems if the filesystem
+ expects discarded blocks to be explicitly cleared. If a
+ device reports that it deterministically returns zeroes
+ when a discarded area is read the discard_zeroes_data
+ parameter will be set to one. Otherwise it will be 0 and
+ the result of reading a discarded area is undefined.
diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp
new file mode 100644
index 000000000000..d40d2b550502
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-ptp
@@ -0,0 +1,98 @@
+What: /sys/class/ptp/
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This directory contains files and directories
+ providing a standardized interface to the ancillary
+ features of PTP hardware clocks.
+
+What: /sys/class/ptp/ptpN/
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This directory contains the attributes of the Nth PTP
+ hardware clock registered into the PTP class driver
+ subsystem.
+
+What: /sys/class/ptp/ptpN/clock_name
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file contains the name of the PTP hardware clock
+ as a human readable string.
+
+What: /sys/class/ptp/ptpN/max_adjustment
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file contains the PTP hardware clock's maximum
+ frequency adjustment value (a positive integer) in
+ parts per billion.
+
+What: /sys/class/ptp/ptpN/n_alarms
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file contains the number of periodic or one shot
+ alarms offer by the PTP hardware clock.
+
+What: /sys/class/ptp/ptpN/n_external_timestamps
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file contains the number of external timestamp
+ channels offered by the PTP hardware clock.
+
+What: /sys/class/ptp/ptpN/n_periodic_outputs
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file contains the number of programmable periodic
+ output channels offered by the PTP hardware clock.
+
+What: /sys/class/ptp/ptpN/pps_avaiable
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file indicates whether the PTP hardware clock
+ supports a Pulse Per Second to the host CPU. Reading
+ "1" means that the PPS is supported, while "0" means
+ not supported.
+
+What: /sys/class/ptp/ptpN/extts_enable
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This write-only file enables or disables external
+ timestamps. To enable external timestamps, write the
+ channel index followed by a "1" into the file.
+ To disable external timestamps, write the channel
+ index followed by a "0" into the file.
+
+What: /sys/class/ptp/ptpN/fifo
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This file provides timestamps on external events, in
+ the form of three integers: channel index, seconds,
+ and nanoseconds.
+
+What: /sys/class/ptp/ptpN/period
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This write-only file enables or disables periodic
+ outputs. To enable a periodic output, write five
+ integers into the file: channel index, start time
+ seconds, start time nanoseconds, period seconds, and
+ period nanoseconds. To disable a periodic output, set
+ all the seconds and nanoseconds values to zero.
+
+What: /sys/class/ptp/ptpN/pps_enable
+Date: September 2010
+Contact: Richard Cochran <richardcochran@gmail.com>
+Description:
+ This write-only file enables or disables delivery of
+ PPS events to the Linux PPS subsystem. To enable PPS
+ events, write a "1" into the file. To disable events,
+ write a "0" into the file.
diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt
index b4a615b78403..7890fae18529 100644
--- a/Documentation/IRQ-affinity.txt
+++ b/Documentation/IRQ-affinity.txt
@@ -4,10 +4,11 @@ ChangeLog:
SMP IRQ affinity
-/proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted
-for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed
-to turn off all CPUs, and if an IRQ controller does not support IRQ
-affinity then the value will not change from the default 0xffffffff.
+/proc/irq/IRQ#/smp_affinity and /proc/irq/IRQ#/smp_affinity_list specify
+which target CPUs are permitted for a given IRQ source. It's a bitmask
+(smp_affinity) or cpu list (smp_affinity_list) of allowed CPUs. It's not
+allowed to turn off all CPUs, and if an IRQ controller does not support
+IRQ affinity then the value will not change from the default of all cpus.
/proc/irq/default_smp_affinity specifies default affinity mask that applies
to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask
@@ -54,3 +55,11 @@ round-trip min/avg/max = 0.1/0.5/585.4 ms
This time around IRQ44 was delivered only to the last four processors.
i.e counters for the CPU0-3 did not change.
+Here is an example of limiting that same irq (44) to cpus 1024 to 1031:
+
+[root@moon 44]# echo 1024-1031 > smp_affinity
+[root@moon 44]# cat smp_affinity
+1024-1031
+
+Note that to do this with a bitmask would require 32 bitmasks of zero
+to follow the pertinent one.
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index 89698e8df7d4..c00c6a5ab21f 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -169,3 +169,18 @@ is issued which positions the tape to a known position. Typically you
must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example)
before i/o can proceed again to a tape drive which was reset.
+There is a cciss_tape_cmds module parameter which can be used to make cciss
+allocate more commands for use by tape drives. Ordinarily only a few commands
+(6) are allocated for tape drives because tape drives are slow and
+infrequently used and the primary purpose of Smart Array controllers is to
+act as a RAID controller for disk drives, so the vast majority of commands
+are allocated for disk devices. However, if you have more than a few tape
+drives attached to a smart array, the default number of commands may not be
+enought (for example, if you have 8 tape drives, you could only rewind 6
+at one time with the default number of commands.) The cciss_tape_cmds module
+parameter allows more commands (up to 16 more) to be allocated for use by
+tape drives. For example:
+
+ insmod cciss.ko cciss_tape_cmds=16
+
+Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index 9164ae3b83bc..9b728dc17535 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -16,7 +16,7 @@ on all processors in the system. Don't let this scare you into
thinking SMP cache/tlb flushing must be so inefficient, this is in
fact an area where many optimizations are possible. For example,
if it can be proven that a user address space has never executed
-on a cpu (see vma->cpu_vm_mask), one need not perform a flush
+on a cpu (see mm_cpumask()), one need not perform a flush
for this address space on that cpu.
First, the TLB flushing interfaces, since they are the simplest. The
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index edb7ae19e868..2c6be0377f55 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -74,3 +74,57 @@ Example:
interrupt-parent = <&mpic>;
phy-handle = <&phy0>
};
+
+* Gianfar PTP clock nodes
+
+General Properties:
+
+ - compatible Should be "fsl,etsec-ptp"
+ - reg Offset and length of the register set for the device
+ - interrupts There should be at least two interrupts. Some devices
+ have as many as four PTP related interrupts.
+
+Clock Properties:
+
+ - fsl,tclk-period Timer reference clock period in nanoseconds.
+ - fsl,tmr-prsc Prescaler, divides the output clock.
+ - fsl,tmr-add Frequency compensation value.
+ - fsl,tmr-fiper1 Fixed interval period pulse generator.
+ - fsl,tmr-fiper2 Fixed interval period pulse generator.
+ - fsl,max-adj Maximum frequency adjustment in parts per billion.
+
+ These properties set the operational parameters for the PTP
+ clock. You must choose these carefully for the clock to work right.
+ Here is how to figure good values:
+
+ TimerOsc = system clock MHz
+ tclk_period = desired clock period nanoseconds
+ NominalFreq = 1000 / tclk_period MHz
+ FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
+ tmr_add = ceil(2^32 / FreqDivRatio)
+ OutputClock = NominalFreq / tmr_prsc MHz
+ PulseWidth = 1 / OutputClock microseconds
+ FiperFreq1 = desired frequency in Hz
+ FiperDiv1 = 1000000 * OutputClock / FiperFreq1
+ tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+ max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+ The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+ driver expects that tmr_fiper1 will be correctly set to produce a 1
+ Pulse Per Second (PPS) signal, since this will be offered to the PPS
+ subsystem to synchronize the Linux clock.
+
+Example:
+
+ ptp_clock@24E00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24E00 0xB0>;
+ interrupts = <12 0x8 13 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <100>;
+ fsl,tmr-add = <0x999999A4>;
+ fsl,tmr-fiper1 = <0x3B9AC9F6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <659999998>;
+ };
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index b22abba78fed..13de64c7f0ab 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -25,6 +25,8 @@ Other applications are described in the following papers:
http://xcpu.org/papers/cellfs-talk.pdf
* PROSE I/O: Using 9p to enable Application Partitions
http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
+ * VirtFS: A Virtualization Aware File System pass-through
+ http://goo.gl/3WPDg
USAGE
=====
@@ -130,31 +132,20 @@ OPTIONS
RESOURCES
=========
-Our current recommendation is to use Inferno (http://www.vitanuova.com/nferno/index.html)
-as the 9p server. You can start a 9p server under Inferno by issuing the
-following command:
- ; styxlisten -A tcp!*!564 export '#U*'
+Protocol specifications are maintained on github:
+http://ericvh.github.com/9p-rfc/
-The -A specifies an unauthenticated export. The 564 is the port # (you may
-have to choose a higher port number if running as a normal user). The '#U*'
-specifies exporting the root of the Linux name space. You may specify a
-subset of the namespace by extending the path: '#U*'/tmp would just export
-/tmp. For more information, see the Inferno manual pages covering styxlisten
-and export.
+9p client and server implementations are listed on
+http://9p.cat-v.org/implementations
-A Linux version of the 9p server is now maintained under the npfs project
-on sourceforge (http://sourceforge.net/projects/npfs). The currently
-maintained version is the single-threaded version of the server (named spfs)
-available from the same SVN repository.
+A 9p2000.L server is being developed by LLNL and can be found
+at http://code.google.com/p/diod/
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
-A stand-alone version of the module (which should build for any 2.6 kernel)
-is available via (http://github.com/ericvh/9p-sac/tree/master)
-
-News and other information is maintained on SWiK (http://swik.net/v9fs)
-and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php).
+News and other information is maintained on a Wiki.
+(http://sf.net/apps/mediawiki/v9fs/index.php).
Bug reports may be issued through the kernel.org bugzilla
(http://bugzilla.kernel.org)
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 60740e8ecb37..f48178024067 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -574,6 +574,12 @@ The contents of each smp_affinity file is the same by default:
> cat /proc/irq/0/smp_affinity
ffffffff
+There is an alternate interface, smp_affinity_list which allows specifying
+a cpu range instead of a bitmask:
+
+ > cat /proc/irq/0/smp_affinity_list
+ 1024-1031
+
The default_smp_affinity mask applies to all non-active IRQs, which are the
IRQs which have not yet been allocated/activated, and hence which lack a
/proc/irq/[0-9]* directory.
@@ -583,12 +589,13 @@ reports itself as being attached. This hardware locality information does not
include information about any possible driver locality preference.
prof_cpu_mask specifies which CPUs are to be profiled by the system wide
-profiler. Default value is ffffffff (all cpus).
+profiler. Default value is ffffffff (all cpus if there are only 32 of them).
The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
between all the CPUs which are allowed to handle it. As usual the kernel has
more info than you and does a better job than you, so the defaults are the
-best choice for almost everyone.
+best choice for almost everyone. [Note this applies only to those IO-APIC's
+that support "Round Robin" interrupt distribution.]
There are three more important subdirectories in /proc: net, scsi, and sys.
The general rule is that the contents, or even the existence of these
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7c6624e7a5cb..5438a2d7907f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1777,9 +1777,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
nosoftlockup [KNL] Disable the soft-lockup detector.
- noswapaccount [KNL] Disable accounting of swap in memory resource
- controller. (See Documentation/cgroups/memory.txt)
-
nosync [HW,M68K] Disables sync negotiation for all devices.
notsc [BUGS=X86-32] Disable Time Stamp Counter
diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt
index 65f4c795015d..9c0a80d17a23 100644
--- a/Documentation/lockstat.txt
+++ b/Documentation/lockstat.txt
@@ -136,7 +136,7 @@ View the top contending locks:
dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24
&inode->i_mutex: 161 286 18446744073709 62882.54 1244614.55 3653 20598 18446744073709 62318.60 1693822.74
&zone->lru_lock: 94 94 0.53 7.33 92.10 4366 32690 0.29 59.81 16350.06
- &inode->i_data.i_mmap_lock: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44
+ &inode->i_data.i_mmap_mutex: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44
&q->__queue_lock: 48 50 0.52 31.62 86.31 774 13131 0.17 113.08 12277.52
&rq->rq_lock_key: 43 47 0.74 68.50 170.63 3706 33929 0.22 107.99 17460.62
&rq->rq_lock_key#2: 39 46 0.75 6.68 49.03 2979 32292 0.17 125.17 17137.63
diff --git a/Documentation/ptp/ptp.txt b/Documentation/ptp/ptp.txt
new file mode 100644
index 000000000000..ae8fef86b832
--- /dev/null
+++ b/Documentation/ptp/ptp.txt
@@ -0,0 +1,89 @@
+
+* PTP hardware clock infrastructure for Linux
+
+ This patch set introduces support for IEEE 1588 PTP clocks in
+ Linux. Together with the SO_TIMESTAMPING socket options, this
+ presents a standardized method for developing PTP user space
+ programs, synchronizing Linux with external clocks, and using the
+ ancillary features of PTP hardware clocks.
+
+ A new class driver exports a kernel interface for specific clock
+ drivers and a user space interface. The infrastructure supports a
+ complete set of PTP hardware clock functionality.
+
+ + Basic clock operations
+ - Set time
+ - Get time
+ - Shift the clock by a given offset atomically
+ - Adjust clock frequency
+
+ + Ancillary clock features
+ - One short or periodic alarms, with signal delivery to user program
+ - Time stamp external events
+ - Period output signals configurable from user space
+ - Synchronization of the Linux system time via the PPS subsystem
+
+** PTP hardware clock kernel API
+
+ A PTP clock driver registers itself with the class driver. The
+ class driver handles all of the dealings with user space. The
+ author of a clock driver need only implement the details of
+ programming the clock hardware. The clock driver notifies the class
+ driver of asynchronous events (alarms and external time stamps) via
+ a simple message passing interface.
+
+ The class driver supports multiple PTP clock drivers. In normal use
+ cases, only one PTP clock is needed. However, for testing and
+ development, it can be useful to have more than one clock in a
+ single system, in order to allow performance comparisons.
+
+** PTP hardware clock user space API
+
+ The class driver also creates a character device for each
+ registered clock. User space can use an open file descriptor from
+ the character device as a POSIX clock id and may call
+ clock_gettime, clock_settime, and clock_adjtime. These calls
+ implement the basic clock operations.
+
+ User space programs may control the clock using standardized
+ ioctls. A program may query, enable, configure, and disable the
+ ancillary clock features. User space can receive time stamped
+ events via blocking read() and poll(). One shot and periodic
+ signals may be configured via the POSIX timer_settime() system
+ call.
+
+** Writing clock drivers
+
+ Clock drivers include include/linux/ptp_clock_kernel.h and register
+ themselves by presenting a 'struct ptp_clock_info' to the
+ registration method. Clock drivers must implement all of the
+ functions in the interface. If a clock does not offer a particular
+ ancillary feature, then the driver should just return -EOPNOTSUPP
+ from those functions.
+
+ Drivers must ensure that all of the methods in interface are
+ reentrant. Since most hardware implementations treat the time value
+ as a 64 bit integer accessed as two 32 bit registers, drivers
+ should use spin_lock_irqsave/spin_unlock_irqrestore to protect
+ against concurrent access. This locking cannot be accomplished in
+ class driver, since the lock may also be needed by the clock
+ driver's interrupt service routine.
+
+** Supported hardware
+
+ + Freescale eTSEC gianfar
+ - 2 Time stamp external triggers, programmable polarity (opt. interrupt)
+ - 2 Alarm registers (optional interrupt)
+ - 3 Periodic signals (optional interrupt)
+
+ + National DP83640
+ - 6 GPIOs programmable as inputs or outputs
+ - 6 GPIOs with dedicated functions (LED/JTAG/clock) can also be
+ used as general inputs or outputs
+ - GPIO inputs can time stamp external triggers
+ - GPIO outputs can produce periodic signals
+ - 1 interrupt pin
+
+ + Intel IXP465
+ - Auxiliary Slave/Master Mode Snapshot (optional interrupt)
+ - Target Time (optional interrupt)
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
new file mode 100644
index 000000000000..f59ded066108
--- /dev/null
+++ b/Documentation/ptp/testptp.c
@@ -0,0 +1,381 @@
+/*
+ * PTP 1588 clock support - User space test program
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <errno.h>
+#include <fcntl.h>
+#include <math.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/ptp_clock.h>
+
+#define DEVICE "/dev/ptp0"
+
+#ifndef ADJ_SETOFFSET
+#define ADJ_SETOFFSET 0x0100
+#endif
+
+#ifndef CLOCK_INVALID
+#define CLOCK_INVALID -1
+#endif
+
+/* When glibc offers the syscall, this will go away. */
+#include <sys/syscall.h>
+static int clock_adjtime(clockid_t id, struct timex *tx)
+{
+ return syscall(__NR_clock_adjtime, id, tx);
+}
+
+static clockid_t get_clockid(int fd)
+{
+#define CLOCKFD 3
+#define FD_TO_CLOCKID(fd) ((~(clockid_t) (fd) << 3) | CLOCKFD)
+
+ return FD_TO_CLOCKID(fd);
+}
+
+static void handle_alarm(int s)
+{
+ printf("received signal %d\n", s);
+}
+
+static int install_handler(int signum, void (*handler)(int))
+{
+ struct sigaction action;
+ sigset_t mask;
+
+ /* Unblock the signal. */
+ sigemptyset(&mask);
+ sigaddset(&mask, signum);
+ sigprocmask(SIG_UNBLOCK, &mask, NULL);
+
+ /* Install the signal handler. */
+ action.sa_handler = handler;
+ action.sa_flags = 0;
+ sigemptyset(&action.sa_mask);
+ sigaction(signum, &action, NULL);
+
+ return 0;
+}
+
+static long ppb_to_scaled_ppm(int ppb)
+{
+ /*
+ * The 'freq' field in the 'struct timex' is in parts per
+ * million, but with a 16 bit binary fractional field.
+ * Instead of calculating either one of
+ *
+ * scaled_ppm = (ppb / 1000) << 16 [1]
+ * scaled_ppm = (ppb << 16) / 1000 [2]
+ *
+ * we simply use double precision math, in order to avoid the
+ * truncation in [1] and the possible overflow in [2].
+ */
+ return (long) (ppb * 65.536);
+}
+
+static void usage(char *progname)
+{
+ fprintf(stderr,
+ "usage: %s [options]\n"
+ " -a val request a one-shot alarm after 'val' seconds\n"
+ " -A val request a periodic alarm every 'val' seconds\n"
+ " -c query the ptp clock's capabilities\n"
+ " -d name device to open\n"
+ " -e val read 'val' external time stamp events\n"
+ " -f val adjust the ptp clock frequency by 'val' ppb\n"
+ " -g get the ptp clock time\n"
+ " -h prints this message\n"
+ " -p val enable output with a period of 'val' nanoseconds\n"
+ " -P val enable or disable (val=1|0) the system clock PPS\n"
+ " -s set the ptp clock time from the system time\n"
+ " -S set the system time from the ptp clock time\n"
+ " -t val shift the ptp clock time by 'val' seconds\n",
+ progname);
+}
+
+int main(int argc, char *argv[])
+{
+ struct ptp_clock_caps caps;
+ struct ptp_extts_event event;
+ struct ptp_extts_request extts_request;
+ struct ptp_perout_request perout_request;
+ struct timespec ts;
+ struct timex tx;
+
+ static timer_t timerid;
+ struct itimerspec timeout;
+ struct sigevent sigevent;
+
+ char *progname;
+ int c, cnt, fd;
+
+ char *device = DEVICE;
+ clockid_t clkid;
+ int adjfreq = 0x7fffffff;
+ int adjtime = 0;
+ int capabilities = 0;
+ int extts = 0;
+ int gettime = 0;
+ int oneshot = 0;
+ int periodic = 0;
+ int perout = -1;
+ int pps = -1;
+ int settime = 0;
+
+ progname = strrchr(argv[0], '/');
+ progname = progname ? 1+progname : argv[0];
+ while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghp:P:sSt:v"))) {
+ switch (c) {
+ case 'a':
+ oneshot = atoi(optarg);
+ break;
+ case 'A':
+ periodic = atoi(optarg);
+ break;
+ case 'c':
+ capabilities = 1;
+ break;
+ case 'd':
+ device = optarg;
+ break;
+ case 'e':
+ extts = atoi(optarg);
+ break;
+ case 'f':
+ adjfreq = atoi(optarg);
+ break;
+ case 'g':
+ gettime = 1;
+ break;
+ case 'p':
+ perout = atoi(optarg);
+ break;
+ case 'P':
+ pps = atoi(optarg);
+ break;
+ case 's':
+ settime = 1;
+ break;
+ case 'S':
+ settime = 2;
+ break;
+ case 't':
+ adjtime = atoi(optarg);
+ break;
+ case 'h':
+ usage(progname);
+ return 0;
+ case '?':
+ default:
+ usage(progname);
+ return -1;
+ }
+ }
+
+ fd = open(device, O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "opening %s: %s\n", device, strerror(errno));
+ return -1;
+ }
+
+ clkid = get_clockid(fd);
+ if (CLOCK_INVALID == clkid) {
+ fprintf(stderr, "failed to read clock id\n");
+ return -1;
+ }
+
+ if (capabilities) {
+ if (ioctl(fd, PTP_CLOCK_GETCAPS, &caps)) {
+ perror("PTP_CLOCK_GETCAPS");
+ } else {
+ printf("capabilities:\n"
+ " %d maximum frequency adjustment (ppb)\n"
+ " %d programmable alarms\n"
+ " %d external time stamp channels\n"
+ " %d programmable periodic signals\n"
+ " %d pulse per second\n",
+ caps.max_adj,
+ caps.n_alarm,
+ caps.n_ext_ts,
+ caps.n_per_out,
+ caps.pps);
+ }
+ }
+
+ if (0x7fffffff != adjfreq) {
+ memset(&tx, 0, sizeof(tx));
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = ppb_to_scaled_ppm(adjfreq);
+ if (clock_adjtime(clkid, &tx)) {
+ perror("clock_adjtime");
+ } else {
+ puts("frequency adjustment okay");
+ }
+ }
+
+ if (adjtime) {
+ memset(&tx, 0, sizeof(tx));
+ tx.modes = ADJ_SETOFFSET;
+ tx.time.tv_sec = adjtime;
+ tx.time.tv_usec = 0;
+ if (clock_adjtime(clkid, &tx) < 0) {
+ perror("clock_adjtime");
+ } else {
+ puts("time shift okay");
+ }
+ }
+
+ if (gettime) {
+ if (clock_gettime(clkid, &ts)) {
+ perror("clock_gettime");
+ } else {
+ printf("clock time: %ld.%09ld or %s",
+ ts.tv_sec, ts.tv_nsec, ctime(&ts.tv_sec));
+ }
+ }
+
+ if (settime == 1) {
+ clock_gettime(CLOCK_REALTIME, &ts);
+ if (clock_settime(clkid, &ts)) {
+ perror("clock_settime");
+ } else {
+ puts("set time okay");
+ }
+ }
+
+ if (settime == 2) {
+ clock_gettime(clkid, &ts);
+ if (clock_settime(CLOCK_REALTIME, &ts)) {
+ perror("clock_settime");
+ } else {
+ puts("set time okay");
+ }
+ }
+
+ if (extts) {
+ memset(&extts_request, 0, sizeof(extts_request));
+ extts_request.index = 0;
+ extts_request.flags = PTP_ENABLE_FEATURE;
+ if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
+ perror("PTP_EXTTS_REQUEST");
+ extts = 0;
+ } else {
+ puts("external time stamp request okay");
+ }
+ for (; extts; extts--) {
+ cnt = read(fd, &event, sizeof(event));
+ if (cnt != sizeof(event)) {
+ perror("read");
+ break;
+ }
+ printf("event index %u at %lld.%09u\n", event.index,
+ event.t.sec, event.t.nsec);
+ fflush(stdout);
+ }
+ /* Disable the feature again. */
+ extts_request.flags = 0;
+ if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
+ perror("PTP_EXTTS_REQUEST");
+ }
+ }
+
+ if (oneshot) {
+ install_handler(SIGALRM, handle_alarm);
+ /* Create a timer. */
+ sigevent.sigev_notify = SIGEV_SIGNAL;
+ sigevent.sigev_signo = SIGALRM;
+ if (timer_create(clkid, &sigevent, &timerid)) {
+ perror("timer_create");
+ return -1;
+ }
+ /* Start the timer. */
+ memset(&timeout, 0, sizeof(timeout));
+ timeout.it_value.tv_sec = oneshot;
+ if (timer_settime(timerid, 0, &timeout, NULL)) {
+ perror("timer_settime");
+ return -1;
+ }
+ pause();
+ timer_delete(timerid);
+ }
+
+ if (periodic) {
+ install_handler(SIGALRM, handle_alarm);
+ /* Create a timer. */
+ sigevent.sigev_notify = SIGEV_SIGNAL;
+ sigevent.sigev_signo = SIGALRM;
+ if (timer_create(clkid, &sigevent, &timerid)) {
+ perror("timer_create");
+ return -1;
+ }
+ /* Start the timer. */
+ memset(&timeout, 0, sizeof(timeout));
+ timeout.it_interval.tv_sec = periodic;
+ timeout.it_value.tv_sec = periodic;
+ if (timer_settime(timerid, 0, &timeout, NULL)) {
+ perror("timer_settime");
+ return -1;
+ }
+ while (1) {
+ pause();
+ }
+ timer_delete(timerid);
+ }
+
+ if (perout >= 0) {
+ if (clock_gettime(clkid, &ts)) {
+ perror("clock_gettime");
+ return -1;
+ }
+ memset(&perout_request, 0, sizeof(perout_request));
+ perout_request.index = 0;
+ perout_request.start.sec = ts.tv_sec + 2;
+ perout_request.start.nsec = 0;
+ perout_request.period.sec = 0;
+ perout_request.period.nsec = perout;
+ if (ioctl(fd, PTP_PEROUT_REQUEST, &perout_request)) {
+ perror("PTP_PEROUT_REQUEST");
+ } else {
+ puts("periodic output request okay");
+ }
+ }
+
+ if (pps != -1) {
+ int enable = pps ? 1 : 0;
+ if (ioctl(fd, PTP_ENABLE_PPS, enable)) {
+ perror("PTP_ENABLE_PPS");
+ } else {
+ puts("pps for system time request okay");
+ }
+ }
+
+ close(fd);
+ return 0;
+}
diff --git a/Documentation/ptp/testptp.mk b/Documentation/ptp/testptp.mk
new file mode 100644
index 000000000000..4ef2d9755421
--- /dev/null
+++ b/Documentation/ptp/testptp.mk
@@ -0,0 +1,33 @@
+# PTP 1588 clock support - User space test program
+#
+# Copyright (C) 2010 OMICRON electronics GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+CC = $(CROSS_COMPILE)gcc
+INC = -I$(KBUILD_OUTPUT)/usr/include
+CFLAGS = -Wall $(INC)
+LDLIBS = -lrt
+PROGS = testptp
+
+all: $(PROGS)
+
+testptp: testptp.o
+
+clean:
+ rm -f testptp.o
+
+distclean: clean
+ rm -f $(PROGS)
diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
index 9b7e1904db1c..5d0fc8bfcdb9 100644
--- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
@@ -1182,6 +1182,16 @@
forge.net/> and explains these in detail, as well as
some other issues.
+ There is also a related point-to-point only "ucast" transport.
+ This is useful when your network does not support multicast, and
+ all network connections are simple point to point links.
+
+ The full set of command line options for this transport are
+
+
+ ethn=ucast,ethernet address,remote address,listen port,remote port
+
+
66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr
diff --git a/Documentation/vm/locking b/Documentation/vm/locking
index 25fadb448760..f61228bd6395 100644
--- a/Documentation/vm/locking
+++ b/Documentation/vm/locking
@@ -66,7 +66,7 @@ in some cases it is not really needed. Eg, vm_start is modified by
expand_stack(), it is hard to come up with a destructive scenario without
having the vmlist protection in this case.
-The page_table_lock nests with the inode i_mmap_lock and the kmem cache
+The page_table_lock nests with the inode i_mmap_mutex and the kmem cache
c_spinlock spinlocks. This is okay, since the kmem code asks for pages after
dropping c_spinlock. The page_table_lock also nests with pagecache_lock and
pagemap_lru_lock spinlocks, and no code asks for memory with these locks
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 05:37:18 +0300