diff options
Diffstat (limited to 'Documentation')
11 files changed, 149 insertions, 31 deletions
diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml index 1af384250910..0ee0f3386cdf 100644 --- a/Documentation/DocBook/media/v4l/media-types.xml +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -57,10 +57,6 @@ <entry>Connector for a RGB composite signal.</entry> </row> <row> - <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry> - <entry>Connector for a test generator.</entry> - </row> - <row> <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry> <entry>Camera video sensor entity.</entry> </row> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index a2bd593881ca..66422d663184 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -23,6 +23,7 @@ Optional properties: during suspend. - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init +- ti,no-idle: When present, the module is never allowed to idle. Example: diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt new file mode 100644 index 000000000000..cd1b1cd7b5c4 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -0,0 +1,68 @@ +* Mediatek IOMMU Architecture Implementation + + Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which +uses the ARM Short-Descriptor translation table format for address translation. + + About the M4U Hardware Block Diagram, please check below: + + EMI (External Memory Interface) + | + m4u (Multimedia Memory Management Unit) + | + SMI Common(Smart Multimedia Interface Common) + | + +----------------+------- + | | + | | + SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb). + (display) (vdec) + | | + | | + +-----+-----+ +----+----+ + | | | | | | + | | |... | | | ... There are different ports in each larb. + | | | | | | +OVL0 RDMA0 WDMA0 MC PP VLD + + As above, The Multimedia HW will go through SMI and M4U while it +access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain +smi local arbiter and smi common. It will control whether the Multimedia +HW should go though the m4u for translation or bypass it and talk +directly with EMI. And also SMI help control the power domain and clocks for +each local arbiter. + Normally we specify a local arbiter(larb) for each multimedia HW +like display, video decode, and camera. And there are different ports +in each larb. Take a example, There are many ports like MC, PP, VLD in the +video decode local arbiter, all these ports are according to the video HW. + +Required properties: +- compatible : must be "mediatek,mt8173-m4u". +- reg : m4u register base and size. +- interrupts : the interrupt of m4u. +- clocks : must contain one entry for each clock-names. +- clock-names : must be "bclk", It is the block clock of m4u. +- mediatek,larbs : List of phandle to the local arbiters in the current Socs. + Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort + according to the local arbiter index, like larb0, larb1, larb2... +- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. + Specifies the mtk_m4u_id as defined in + dt-binding/memory/mt8173-larb-port.h. + +Example: + iommu: iommu@10205000 { + compatible = "mediatek,mt8173-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>; + #iommu-cells = <1>; + }; + +Example for a client device: + display { + compatible = "mediatek,mt8173-disp"; + iommus = <&iommu M4U_PORT_DISP_OVL0>, + <&iommu M4U_PORT_DISP_RDMA0>; + ... + }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt index 48ffb38f699e..3ed027cfca95 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt @@ -7,23 +7,34 @@ connected to the IPMMU through a port called micro-TLB. Required Properties: - - compatible: Must contain SoC-specific and generic entries from below. + - compatible: Must contain SoC-specific and generic entry below in case + the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU. - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU. - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU. - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU. - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU. - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU. + - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU. - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU. - reg: Base address and size of the IPMMU registers. - interrupts: Specifiers for the MMU fault interrupts. For instances that support secure mode two interrupts must be specified, for non-secure and secure mode, in that order. For instances that don't support secure mode a - single interrupt must be specified. + single interrupt must be specified. Not required for cache IPMMUs. - #iommu-cells: Must be 1. +Optional properties: + + - renesas,ipmmu-main: reference to the main IPMMU instance in two cells. + The first cell is a phandle to the main IPMMU and the second cell is + the interrupt bit number associated with the particular cache IPMMU device. + The interrupt bit number needs to match the main IPMMU IMSSTR register. + Only used by cache IPMMU instances. + + Each bus master connected to an IPMMU must reference the IPMMU in its device node with the following property: diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt index bc620fe32a70..85f068805dd8 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt @@ -23,28 +23,24 @@ MMUs. for window 1, 2 and 3. * M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and the other System MMU on the write channel. -The drivers must consider how to handle those System MMUs. One of the idea is -to implement child devices or sub-devices which are the client devices of the -System MMU. -Note: -The current DT binding for the Exynos System MMU is incomplete. -The following properties can be removed or changed, if found incompatible with -the "Generic IOMMU Binding" support for attaching devices to the IOMMU. +For information on assigning System MMU controller to its peripheral devices, +see generic IOMMU bindings. Required properties: - compatible: Should be "samsung,exynos-sysmmu" - reg: A tuple of base address and size of System MMU registers. +- #iommu-cells: Should be <0>. - interrupt-parent: The phandle of the interrupt controller of System MMU - interrupts: An interrupt specifier for interrupt signal of System MMU, according to the format defined by a particular interrupt controller. -- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock. +- clock-names: Should be "sysmmu" or a pair of "aclk" and "pclk" to gate + SYSMMU core clocks. Optional "master" if the clock to the System MMU is gated by - another gate clock other than "sysmmu". - Exynos4 SoCs, there needs no "master" clock. - Exynos5 SoCs, some System MMUs must have "master" clocks. -- clocks: Required if the System MMU is needed to gate its clock. + another gate clock other core (usually main gate clock + of peripheral device this SYSMMU belongs to). +- clocks: Phandles for respective clocks described by clock-names. - power-domains: Required if the System MMU is needed to gate its power. Please refer to the following document: Documentation/devicetree/bindings/power/pd-samsung.txt @@ -57,6 +53,7 @@ Examples: power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; + iommus = <&sysmmu_gsc0>; }; sysmmu_gsc0: sysmmu@13E80000 { @@ -67,4 +64,5 @@ Examples: clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; power-domains = <&pd_gsc>; + #iommu-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt new file mode 100644 index 000000000000..06a83ceebba7 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -0,0 +1,24 @@ +SMI (Smart Multimedia Interface) Common + +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt + +Required properties: +- compatible : must be "mediatek,mt8173-smi-common" +- reg : the register and size of the SMI block. +- power-domains : a phandle to the power domain of this local arbiter. +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : must contain 2 entries, as follows: + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting + the register. + - "smi" : It's the clock for transfer data and command. + They may be the same if both source clocks are the same. + +Example: + smi_common: smi@14022000 { + compatible = "mediatek,mt8173-smi-common"; + reg = <0 0x14022000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt new file mode 100644 index 000000000000..55ff3b7e0bb9 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -0,0 +1,25 @@ +SMI (Smart Multimedia Interface) Local Arbiter + +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt + +Required properties: +- compatible : must be "mediatek,mt8173-smi-larb" +- reg : the register and size of this local arbiter. +- mediatek,smi : a phandle to the smi_common node. +- power-domains : a phandle to the power domain of this local arbiter. +- clocks : Must contain an entry for each entry in clock-names. +- clock-names: must contain 2 entries, as follows: + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting + the register. + - "smi" : It's the clock for transfer data and command. + +Example: + larb1: larb@16010000 { + compatible = "mediatek,mt8173-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB_CKEN>; + clock-names = "apb", "smi"; + }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 81a9f9e6b45f..c8ac222eac67 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -82,8 +82,8 @@ Example: "ch16", "ch17", "ch18", "ch19", "ch20", "ch21", "ch22", "ch23", "ch24"; - clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&cpg>; phy-mode = "rgmii-id"; phy-handle = <&phy0>; diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index d18109657da6..4f05d208c95c 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -26,11 +26,7 @@ Example: ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: dcdc1 { - reg = <0>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -38,7 +34,6 @@ Example: }; dcdc2_reg: dcdc2 { - reg = <1>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -46,7 +41,6 @@ Example: }; dcdc3_reg: dcc3 { - reg = <2>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1500000>; regulator-boot-on; @@ -54,7 +48,6 @@ Example: }; ldo1_reg: ldo1 { - reg = <3>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -62,7 +55,6 @@ Example: }; ldo2_reg: ldo2 { - reg = <4>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -70,7 +62,6 @@ Example: }; ldo3_reg: ldo3 { - reg = <5>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -78,7 +69,6 @@ Example: }; ldo4_reg: ldo4 { - reg = <6>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index daf9c0f742d2..c81731096a43 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -358,7 +358,8 @@ In the first case there are two additional complications: - if CR4.SMEP is enabled: since we've turned the page into a kernel page, the kernel may now execute it. We handle this by also setting spte.nx. If we get a user fetch or read fault, we'll change spte.u=1 and - spte.nx=gpte.nx back. + spte.nx=gpte.nx back. For this to work, KVM forces EFER.NX to 1 when + shadow paging is in use. - if CR4.SMAP is disabled: since the page has been changed to a kernel page, it can not be reused when CR4.SMAP is enabled. We set CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt index 9f9ec9f76039..4e4b6f10d841 100644 --- a/Documentation/watchdog/watchdog-parameters.txt +++ b/Documentation/watchdog/watchdog-parameters.txt @@ -400,3 +400,7 @@ wm8350_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- +sun4v_wdt: +timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000) +nowayout: Watchdog cannot be stopped once started +------------------------------------------------- |