diff options
Diffstat (limited to 'Documentation')
4 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt index 50bf611a4d2c..5add8d7d855f 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt @@ -12,6 +12,7 @@ Required properties: - "amlogic,meson-gxbb-mmc" - "amlogic,meson-gxl-mmc" - "amlogic,meson-gxm-mmc" + - "amlogic,meson-axg-mmc" - clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names. - clock-names: Should contain the following: "core" - Main peripheral bus clock diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt new file mode 100644 index 000000000000..7cd8c432d7c8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/jz4740.txt @@ -0,0 +1,38 @@ +* Ingenic JZ47xx MMC controllers + +This file documents the device tree properties used for the MMC controller in +Ingenic JZ4740/JZ4780 SoCs. These are in addition to the core MMC properties +described in mmc.txt. + +Required properties: +- compatible: Should be one of the following: + - "ingenic,jz4740-mmc" for the JZ4740 + - "ingenic,jz4780-mmc" for the JZ4780 +- reg: Should contain the MMC controller registers location and length. +- interrupts: Should contain the interrupt specifier of the MMC controller. +- clocks: Clock for the MMC controller. + +Optional properties: +- dmas: List of DMA specifiers with the controller specific format + as described in the generic DMA client binding. A tx and rx + specifier is required. +- dma-names: RX and TX DMA request names. + Should be "rx" and "tx", in that order. + +For additional details on DMA client bindings see ../dma/dma.txt. + +Example: + +mmc0: mmc@13450000 { + compatible = "ingenic,jz4780-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu JZ4780_CLK_MSC0>; + clock-names = "mmc"; + + dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 467cd7b147ce..dbe23b12ea1c 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -19,6 +19,8 @@ Optional properties: - wp-gpios: Specify GPIOs for write protection, see gpio binding - cd-inverted: when present, polarity on the CD line is inverted. See the note below for the case, when a GPIO is used for the CD line +- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. + It's only valid when cd-gpios is present. - wp-inverted: when present, polarity on the WP line is inverted. See the note below for the case, when a GPIO is used for the WP line - disable-wp: When set no physical WP line is present. This property should diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 2d5287eeed95..ba3825245889 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -26,6 +26,7 @@ Required properties: "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC "renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller |