diff options
Diffstat (limited to 'Documentation/powerpc')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 19 | ||||
| -rw-r--r-- | Documentation/powerpc/mpc52xx-device-tree-bindings.txt | 10 |
2 files changed, 19 insertions, 10 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index b3bd36668db3..33994271cb3b 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1703,29 +1703,32 @@ platforms are moved over to use the flattened-device-tree model. Required properties: - device_type : has to be "rom" - - compatible : Should specify what this ROM device is compatible with - (i.e. "onenand"). Currently, this is most likely to be "direct-mapped" - (which corresponds to the MTD physmap mapping driver). - - regs : Offset and length of the register set (or memory mapping) for + - compatible : Should specify what this flash device is compatible with. + Currently, this is most likely to be "direct-mapped" (which + corresponds to the MTD physmap mapping driver). + - reg : Offset and length of the register set (or memory mapping) for the device. + - bank-width : Width of the flash data bus in bytes. Required + for the NOR flashes (compatible == "direct-mapped" and others) ONLY. Recommended properties : - - bank-width : Width of the flash data bus in bytes. Required - for the NOR flashes (compatible == "direct-mapped" and others) ONLY. - partitions : Several pairs of 32-bit values where the first value is partition's offset from the start of the device and the second one is partition size in bytes with LSB used to signify a read only - partititon (so, the parition size should always be an even number). + partition (so, the parition size should always be an even number). - partition-names : The list of concatenated zero terminated strings representing the partition names. + - probe-type : The type of probe which should be done for the chip + (JEDEC vs CFI actually). Valid ONLY for NOR flashes. Example: flash@ff000000 { device_type = "rom"; compatible = "direct-mapped"; - regs = <ff000000 01000000>; + probe-type = "CFI"; + reg = <ff000000 01000000>; bank-width = <4>; partitions = <00000000 00f80000 00f80000 00080001>; diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt index d077d764f82b..69f016f02bb0 100644 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt @@ -4,6 +4,12 @@ MPC52xx Device Tree Bindings (c) 2006 Secret Lab Technologies Ltd Grant Likely <grant.likely at secretlab.ca> +********** DRAFT *********** +* WARNING: Do not depend on the stability of these bindings just yet. +* The MPC5200 device tree conventions are still in flux +* Keep an eye on the linuxppc-dev mailing list for more details +********** DRAFT *********** + I - Introduction ================ Boards supported by the arch/powerpc architecture require device tree be @@ -157,8 +163,8 @@ rtc@<addr> rtc *-rtc Real time clock mscan@<addr> mscan *-mscan CAN bus controller pci@<addr> pci *-pci PCI bridge serial@<addr> serial *-psc-uart PSC in serial mode -i2s@<addr> i2s *-psc-i2s PSC in i2s mode -ac97@<addr> ac97 *-psc-ac97 PSC in ac97 mode +i2s@<addr> sound *-psc-i2s PSC in i2s mode +ac97@<addr> sound *-psc-ac97 PSC in ac97 mode spi@<addr> spi *-psc-spi PSC in spi mode irda@<addr> irda *-psc-irda PSC in IrDA mode spi@<addr> spi *-spi MPC52xx spi device |