diff options
Diffstat (limited to 'Documentation/powerpc')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 3c62e66e1fcc..5c0ba235f5a5 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1136,10 +1136,10 @@ Sense and level information should be encoded as follows: Devices connected to openPIC-compatible controllers should encode sense and polarity as follows: - 0 = high to low edge sensitive type enabled + 0 = low to high edge sensitive type enabled 1 = active low level sensitive type enabled - 2 = low to high edge sensitive type enabled - 3 = active high level sensitive type enabled + 2 = active high level sensitive type enabled + 3 = high to low edge sensitive type enabled ISA PIC interrupt controllers should adhere to the ISA PIC encodings listed below: @@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model. - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - compatible : Should be "gianfar" - reg : Offset and length of the register set for the device - - address : List of bytes representing the ethernet address of + - mac-address : List of bytes representing the ethernet address of this controller - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level @@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model. model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; + mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <d 3 e 3 12 3>; interrupt-parent = <40000>; phy-handle = <2452000> @@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node. model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; + mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <d 3 e 3 12 3>; interrupt-parent = <40000>; phy-handle = <2452000>; @@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node. model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 E0 0C 00 73 01 ]; + mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 3 14 3 18 3>; interrupt-parent = <40000>; phy-handle = <2452001>; @@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node. model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; - address = [ 00 E0 0C 00 73 02 ]; + mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 3>; interrupt-parent = <40000>; phy-handle = <2452002>; |