diff options
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/devlink/devlink-port.rst | 34 |
1 files changed, 33 insertions, 1 deletions
diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst index 2c637f4aae8e..c3302d23e480 100644 --- a/Documentation/networking/devlink/devlink-port.rst +++ b/Documentation/networking/devlink/devlink-port.rst @@ -110,7 +110,7 @@ devlink ports for both the controllers. Function configuration ====================== -A user can configure the function attribute before enumerating the PCI +Users can configure one or more function attributes before enumerating the PCI function. Usually it means, user should configure function attribute before a bus specific device for the function is created. However, when SRIOV is enabled, virtual function devices are created on the PCI bus. @@ -122,6 +122,9 @@ A user may set the hardware address of the function using `devlink port function set hw_addr` command. For Ethernet port function this means a MAC address. +Users may also set the RoCE capability of the function using +`devlink port function set roce` command. + Function attributes =================== @@ -162,6 +165,35 @@ device created for the PCI VF/SF. function: hw_addr 00:00:00:00:88:88 +RoCE capability setup +--------------------- +Not all PCI VFs/SFs require RoCE capability. + +When RoCE capability is disabled, it saves system memory per PCI VF/SF. + +When user disables RoCE capability for a VF/SF, user application cannot send or +receive any RoCE packets through this VF/SF and RoCE GID table for this PCI +will be empty. + +When RoCE capability is disabled in the device using port function attribute, +VF/SF driver cannot override it. + +- Get RoCE capability of the VF device:: + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 roce enable + +- Set RoCE capability of the VF device:: + + $ devlink port function set pci/0000:06:00.0/2 roce disable + + $ devlink port show pci/0000:06:00.0/2 + pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 + function: + hw_addr 00:00:00:00:00:00 roce disable + Subfunction ============ |