diff options
Diffstat (limited to 'Documentation/media/uapi/rc/rc-sysfs-nodes.rst')
| -rw-r--r-- | Documentation/media/uapi/rc/rc-sysfs-nodes.rst | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst b/Documentation/media/uapi/rc/rc-sysfs-nodes.rst deleted file mode 100644 index b8e8319e3317..000000000000 --- a/Documentation/media/uapi/rc/rc-sysfs-nodes.rst +++ /dev/null @@ -1,151 +0,0 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/media/uapi/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - -.. _remote_controllers_sysfs_nodes: - -******************************* -Remote Controller's sysfs nodes -******************************* - -As defined at ``Documentation/ABI/testing/sysfs-class-rc``, those are -the sysfs nodes that control the Remote Controllers: - - -.. _sys_class_rc: - -/sys/class/rc/ -============== - -The ``/sys/class/rc/`` class sub-directory belongs to the Remote -Controller core and provides a sysfs interface for configuring infrared -remote controller receivers. - - -.. _sys_class_rc_rcN: - -/sys/class/rc/rcN/ -================== - -A ``/sys/class/rc/rcN`` directory is created for each remote control -receiver device where N is the number of the receiver. - - -.. _sys_class_rc_rcN_protocols: - -/sys/class/rc/rcN/protocols -=========================== - -Reading this file returns a list of available protocols, something like:: - - rc5 [rc6] nec jvc [sony] - -Enabled protocols are shown in [] brackets. - -Writing "+proto" will add a protocol to the list of enabled protocols. - -Writing "-proto" will remove a protocol from the list of enabled -protocols. - -Writing "proto" will enable only "proto". - -Writing "none" will disable all protocols. - -Write fails with ``EINVAL`` if an invalid protocol combination or unknown -protocol name is used. - - -.. _sys_class_rc_rcN_filter: - -/sys/class/rc/rcN/filter -======================== - -Sets the scancode filter expected value. - -Use in combination with ``/sys/class/rc/rcN/filter_mask`` to set the -expected value of the bits set in the filter mask. If the hardware -supports it then scancodes which do not match the filter will be -ignored. Otherwise the write will fail with an error. - -This value may be reset to 0 if the current protocol is altered. - - -.. _sys_class_rc_rcN_filter_mask: - -/sys/class/rc/rcN/filter_mask -============================= - -Sets the scancode filter mask of bits to compare. Use in combination -with ``/sys/class/rc/rcN/filter`` to set the bits of the scancode which -should be compared against the expected value. A value of 0 disables the -filter to allow all valid scancodes to be processed. - -If the hardware supports it then scancodes which do not match the filter -will be ignored. Otherwise the write will fail with an error. - -This value may be reset to 0 if the current protocol is altered. - - -.. _sys_class_rc_rcN_wakeup_protocols: - -/sys/class/rc/rcN/wakeup_protocols -================================== - -Reading this file returns a list of available protocols to use for the -wakeup filter, something like:: - - rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce - -Note that protocol variants are listed, so ``nec``, ``sony``, ``rc-5``, ``rc-6`` -have their different bit length encodings listed if available. - -Note that all protocol variants are listed. - -The enabled wakeup protocol is shown in [] brackets. - -Only one protocol can be selected at a time. - -Writing "proto" will use "proto" for wakeup events. - -Writing "none" will disable wakeup. - -Write fails with ``EINVAL`` if an invalid protocol combination or unknown -protocol name is used, or if wakeup is not supported by the hardware. - - -.. _sys_class_rc_rcN_wakeup_filter: - -/sys/class/rc/rcN/wakeup_filter -=============================== - -Sets the scancode wakeup filter expected value. Use in combination with -``/sys/class/rc/rcN/wakeup_filter_mask`` to set the expected value of -the bits set in the wakeup filter mask to trigger a system wake event. - -If the hardware supports it and wakeup_filter_mask is not 0 then -scancodes which match the filter will wake the system from e.g. suspend -to RAM or power off. Otherwise the write will fail with an error. - -This value may be reset to 0 if the wakeup protocol is altered. - - -.. _sys_class_rc_rcN_wakeup_filter_mask: - -/sys/class/rc/rcN/wakeup_filter_mask -==================================== - -Sets the scancode wakeup filter mask of bits to compare. Use in -combination with ``/sys/class/rc/rcN/wakeup_filter`` to set the bits of -the scancode which should be compared against the expected value to -trigger a system wake event. - -If the hardware supports it and wakeup_filter_mask is not 0 then -scancodes which match the filter will wake the system from e.g. suspend -to RAM or power off. Otherwise the write will fail with an error. - -This value may be reset to 0 if the wakeup protocol is altered. |