diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/ads1015 | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/adt7475 | 9 | ||||
| -rw-r--r-- | Documentation/hwmon/ir35221 | 87 | ||||
| -rw-r--r-- | Documentation/hwmon/ltc4245 | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/pmbus-core | 2 |
5 files changed, 99 insertions, 3 deletions
diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 index 063b80d857b1..02d2a459385f 100644 --- a/Documentation/hwmon/ads1015 +++ b/Documentation/hwmon/ads1015 @@ -40,7 +40,7 @@ By default all inputs are exported. Platform Data ------------- -In linux/i2c/ads1015.h platform data is defined, channel_data contains +In linux/platform_data/ads1015.h platform data is defined, channel_data contains configuration data for the used input combinations: - pga is the programmable gain amplifier (values are full scale) 0: +/- 6.144 V diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475 index 0502f2b464e1..09d73a10644c 100644 --- a/Documentation/hwmon/adt7475 +++ b/Documentation/hwmon/adt7475 @@ -109,6 +109,15 @@ fan speed) is applied. PWM values range from 0 (off) to 255 (full speed). Fan speed may be set to maximum when the temperature sensor associated with the PWM control exceeds temp#_max. +At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the +minimum (i.e. auto_point1_pwm). This behaviour can be configured using the +pwm[1-*]_stall_disable sysfs attribute. A value of 0 means the fans will shut +off. A value of 1 means the fans will run at auto_point1_pwm. + +The responsiveness of the ADT747x to temperature changes can be configured. +This allows smoothing of the fan speed transition. To set the transition time +set the value in ms in the temp[1-*]_smoothing sysfs attribute. + Notes ----- diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 new file mode 100644 index 000000000000..f7e112752c04 --- /dev/null +++ b/Documentation/hwmon/ir35221 @@ -0,0 +1,87 @@ +Kernel driver ir35221 +===================== + +Supported chips: + * Infinion IR35221 + Prefix: 'ir35221' + Addresses scanned: - + Datasheet: Datasheet is not publicly available. + +Author: Samuel Mendoza-Jonas <sam@mendozajonas.com> + + +Description +----------- + +IR35221 is a Digital DC-DC Multiphase Converter + + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Example: the following commands will load the driver for an IR35221 +at address 0x70 on I2C bus #4: + +# modprobe ir35221 +# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device + + +Sysfs attributes +---------------- + +curr1_label "iin" +curr1_input Measured input current +curr1_max Maximum current +curr1_max_alarm Current high alarm + +curr[2-3]_label "iout[1-2]" +curr[2-3]_input Measured output current +curr[2-3]_crit Critical maximum current +curr[2-3]_crit_alarm Current critical high alarm +curr[2-3]_highest Highest output current +curr[2-3]_lowest Lowest output current +curr[2-3]_max Maximum current +curr[2-3]_max_alarm Current high alarm + +in1_label "vin" +in1_input Measured input voltage +in1_crit Critical maximum input voltage +in1_crit_alarm Input voltage critical high alarm +in1_highest Highest input voltage +in1_lowest Lowest input voltage +in1_min Minimum input voltage +in1_min_alarm Input voltage low alarm + +in[2-3]_label "vout[1-2]" +in[2-3]_input Measured output voltage +in[2-3]_lcrit Critical minimum output voltage +in[2-3]_lcrit_alarm Output voltage critical low alarm +in[2-3]_crit Critical maximum output voltage +in[2-3]_crit_alarm Output voltage critical high alarm +in[2-3]_highest Highest output voltage +in[2-3]_lowest Lowest output voltage +in[2-3]_max Maximum output voltage +in[2-3]_max_alarm Output voltage high alarm +in[2-3]_min Minimum output voltage +in[2-3]_min_alarm Output voltage low alarm + +power1_label "pin" +power1_input Measured input power +power1_alarm Input power high alarm +power1_max Input power limit + +power[2-3]_label "pout[1-2]" +power[2-3]_input Measured output power +power[2-3]_max Output power limit +power[2-3]_max_alarm Output power high alarm + +temp[1-2]_input Measured temperature +temp[1-2]_crit Critical high temperature +temp[1-2]_crit_alarm Chip temperature critical high alarm +temp[1-2]_highest Highest temperature +temp[1-2]_lowest Lowest temperature +temp[1-2]_max Maximum temperature +temp[1-2]_max_alarm Chip temperature high alarm diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245 index b478b0864965..4ca7a9da09f9 100644 --- a/Documentation/hwmon/ltc4245 +++ b/Documentation/hwmon/ltc4245 @@ -96,7 +96,7 @@ slowly, -EAGAIN will be returned when you read the sysfs attribute containing the sensor reading. The LTC4245 chip can be configured to sample all GPIO pins with two methods: -1) platform data -- see include/linux/i2c/ltc4245.h +1) platform data -- see include/linux/platform_data/ltc4245.h 2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip The default mode of operation is to sample a single GPIO pin. diff --git a/Documentation/hwmon/pmbus-core b/Documentation/hwmon/pmbus-core index 31e4720fed18..8ed10e9ddfb5 100644 --- a/Documentation/hwmon/pmbus-core +++ b/Documentation/hwmon/pmbus-core @@ -253,7 +253,7 @@ Specifically, it provides the following information. PMBus driver platform data ========================== -PMBus platform data is defined in include/linux/i2c/pmbus.h. Platform data +PMBus platform data is defined in include/linux/pmbus.h. Platform data currently only provides a flag field with a single bit used. #define PMBUS_SKIP_STATUS_CHECK (1 << 0) |