summaryrefslogtreecommitdiff
path: root/Documentation/feature-removal-schedule.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/feature-removal-schedule.txt')
-rw-r--r--Documentation/feature-removal-schedule.txt80
1 files changed, 15 insertions, 65 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 8a988e5708ba..ea0bace0124a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -184,7 +184,7 @@ Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
A much more powerful interface, /proc/<pid>/oom_score_adj, was
introduced with the oom killer rewrite that allows users to increase or
- decrease the badness() score linearly. This interface will replace
+ decrease the badness score linearly. This interface will replace
/proc/<pid>/oom_adj.
A warning will be emitted to the kernel log if an application uses this
@@ -193,20 +193,6 @@ Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
---------------------------
-What: CS5535/CS5536 obsolete GPIO driver
-When: June 2011
-Files: drivers/staging/cs5535_gpio/*
-Check: drivers/staging/cs5535_gpio/cs5535_gpio.c
-Why: A newer driver replaces this; it is drivers/gpio/cs5535-gpio.c, and
- integrates with the Linux GPIO subsystem. The old driver has been
- moved to staging, and will be removed altogether around 2.6.40.
- Please test the new driver, and ensure that the functionality you
- need and any bugfixes from the old driver are available in the new
- one.
-Who: Andres Salomon <dilinger@queued.net>
-
---------------------------
-
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
@@ -294,7 +280,7 @@ When: The schedule was July 2008, but it was decided that we are going to keep t
Why: The support code for the old firmware hurts code readability/maintainability
and slightly hurts runtime performance. Bugfixes for the old firmware
are not provided by Broadcom anymore.
-Who: Michael Buesch <mb@bu3sch.de>
+Who: Michael Buesch <m@bues.ch>
---------------------------
@@ -430,7 +416,7 @@ Who: Avi Kivity <avi@redhat.com>
----------------------------
What: iwlwifi 50XX module parameters
-When: 2.6.40
+When: 3.0
Why: The "..50" modules parameters were used to configure 5000 series and
up devices; different set of module parameters also available for 4965
with same functionalities. Consolidate both set into single place
@@ -441,7 +427,7 @@ Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
----------------------------
What: iwl4965 alias support
-When: 2.6.40
+When: 3.0
Why: Internal alias support has been present in module-init-tools for some
time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed
with no impact.
@@ -474,15 +460,8 @@ Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
----------------------------
-What: DMA_xxBIT_MASK macros
-When: Jun 2011
-Why: DMA_xxBIT_MASK macros were replaced with DMA_BIT_MASK() macros.
-Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-
-----------------------------
-
What: iwlwifi disable_hw_scan module parameters
-When: 2.6.40
+When: 3.0
Why: Hareware scan is the prefer method for iwlwifi devices for
scanning operation. Remove software scan support for all the
iwlwifi devices.
@@ -491,26 +470,6 @@ Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
----------------------------
-What: access to nfsd auth cache through sys_nfsservctl or '.' files
- in the 'nfsd' filesystem.
-When: 2.6.40
-Why: This is a legacy interface which have been replaced by a more
- dynamic cache. Continuing to maintain this interface is an
- unnecessary burden.
-Who: NeilBrown <neilb@suse.de>
-
-----------------------------
-
-What: cancel_rearming_delayed_work[queue]()
-When: 2.6.39
-
-Why: The functions have been superceded by cancel_delayed_work_sync()
- quite some time ago. The conversion is trivial and there is no
- in-kernel user left.
-Who: Tejun Heo <tj@kernel.org>
-
-----------------------------
-
What: Legacy, non-standard chassis intrusion detection interface.
When: June 2011
Why: The adm9240, w83792d and w83793 hardware monitoring drivers have
@@ -528,22 +487,6 @@ Files: net/netfilter/xt_connlimit.c
----------------------------
-What: noswapaccount kernel command line parameter
-When: 2.6.40
-Why: The original implementation of memsw feature enabled by
- CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
- kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
- turned out to be not ideal because we cannot have the feature compiled
- in and disabled by default and let only interested to enable it
- (e.g. general distribution kernels might need it). Therefore we have
- added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
- the both possibilities. If we remove noswapaccount we will have
- less command line parameters with the same functionality and we
- can also cleanup the parameter handling a bit ().
-Who: Michal Hocko <mhocko@suse.cz>
-
-----------------------------
-
What: ipt_addrtype match include file
When: 2012
Why: superseded by xt_addrtype
@@ -562,7 +505,7 @@ Who: Jean Delvare <khali@linux-fr.org>
----------------------------
What: Support for UVCIOC_CTRL_ADD in the uvcvideo driver
-When: 2.6.42
+When: 3.2
Why: The information passed to the driver by this ioctl is now queried
dynamically from the device.
Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -570,7 +513,7 @@ Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
----------------------------
What: Support for UVCIOC_CTRL_MAP_OLD in the uvcvideo driver
-When: 2.6.42
+When: 3.2
Why: Used only by applications compiled against older driver versions.
Superseded by UVCIOC_CTRL_MAP which supports V4L2 menu controls.
Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -578,7 +521,7 @@ Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
----------------------------
What: Support for UVCIOC_CTRL_GET and UVCIOC_CTRL_SET in the uvcvideo driver
-When: 2.6.42
+When: 3.2
Why: Superseded by the UVCIOC_CTRL_QUERY ioctl.
Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -640,3 +583,10 @@ Why: Just opening a V4L device should not change the state of the hardware
Who: Hans Verkuil <hans.verkuil@cisco.com>
----------------------------
+
+What: g_file_storage driver
+When: 3.8
+Why: This driver has been superseded by g_mass_storage.
+Who: Alan Stern <stern@rowland.harvard.edu>
+
+----------------------------