diff options
Diffstat (limited to 'Documentation/devicetree')
82 files changed, 2710 insertions, 355 deletions
diff --git a/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml new file mode 100644 index 000000000000..170aad5dd7ed --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cirrus/cirrus,ep9301.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic EP93xx platforms + +description: + The EP93xx SoC is a ARMv4T-based with 200 MHz ARM9 CPU. + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: The TS-7250 is a compact, full-featured Single Board + Computer (SBC) based upon the Cirrus EP9302 ARM9 CPU + items: + - const: technologic,ts7250 + - const: cirrus,ep9301 + + - description: The Liebherr BK3 is a derivate from ts7250 board + items: + - const: liebherr,bk3 + - const: cirrus,ep9301 + + - description: EDB302 is an evaluation board by Cirrus Logic, + based on a Cirrus Logic EP9302 CPU + items: + - const: cirrus,edb9302 + - const: cirrus,ep9301 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml new file mode 100644 index 000000000000..8130923fdc72 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/cirrus,ep9312-pata.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic EP9312 PATA controller + +maintainers: + - Damien Le Moal <dlemoal@kernel.org> + +properties: + compatible: + oneOf: + - const: cirrus,ep9312-pata + - items: + - const: cirrus,ep9315-pata + - const: cirrus,ep9312-pata + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + ide@800a0000 { + compatible = "cirrus,ep9312-pata"; + reg = <0x800a0000 0x38>; + interrupt-parent = <&vic1>; + interrupts = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&ide_default_pins>; + }; diff --git a/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml new file mode 100644 index 000000000000..faca0cb3f154 --- /dev/null +++ b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Elgin JG10309-01 SPI-controlled display + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +description: | + The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1 + board and is a custom display. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: elgin,jg10309-01 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 24000000 + + spi-cpha: true + + spi-cpol: true + +required: + - compatible + - reg + - spi-cpha + - spi-cpol + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "elgin,jg10309-01"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml new file mode 100644 index 000000000000..871b76ddf90f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic ep93xx SoC DMA controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-dma-m2m + - items: + - enum: + - cirrus,ep9302-dma-m2m + - cirrus,ep9307-dma-m2m + - cirrus,ep9312-dma-m2m + - cirrus,ep9315-dma-m2m + - const: cirrus,ep9301-dma-m2m + + reg: + items: + - description: m2m0 channel registers + - description: m2m1 channel registers + + clocks: + items: + - description: m2m0 channel gate clock + - description: m2m1 channel gate clock + + clock-names: + items: + - const: m2m0 + - const: m2m1 + + interrupts: + items: + - description: m2m0 channel interrupt + - description: m2m1 channel interrupt + + '#dma-cells': + const: 2 + description: | + The first cell is the unique device channel number as indicated by this + table for ep93xx: + + 10: SPI controller + 11: IDE controller + + The second cell is the DMA direction line number: + + 1: Memory to device + 2: Device to memory + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + dma-controller@80000100 { + compatible = "cirrus,ep9301-dma-m2m"; + reg = <0x80000100 0x0040>, + <0x80000140 0x0040>; + clocks = <&syscon EP93XX_CLK_M2M0>, + <&syscon EP93XX_CLK_M2M1>; + clock-names = "m2m0", "m2m1"; + interrupt-parent = <&vic0>; + interrupts = <17>, <18>; + #dma-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml new file mode 100644 index 000000000000..d14c31553543 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic ep93xx SoC M2P DMA controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-dma-m2p + - items: + - enum: + - cirrus,ep9302-dma-m2p + - cirrus,ep9307-dma-m2p + - cirrus,ep9312-dma-m2p + - cirrus,ep9315-dma-m2p + - const: cirrus,ep9301-dma-m2p + + reg: + items: + - description: m2p0 channel registers + - description: m2p1 channel registers + - description: m2p2 channel registers + - description: m2p3 channel registers + - description: m2p4 channel registers + - description: m2p5 channel registers + - description: m2p6 channel registers + - description: m2p7 channel registers + - description: m2p8 channel registers + - description: m2p9 channel registers + + clocks: + items: + - description: m2p0 channel gate clock + - description: m2p1 channel gate clock + - description: m2p2 channel gate clock + - description: m2p3 channel gate clock + - description: m2p4 channel gate clock + - description: m2p5 channel gate clock + - description: m2p6 channel gate clock + - description: m2p7 channel gate clock + - description: m2p8 channel gate clock + - description: m2p9 channel gate clock + + clock-names: + items: + - const: m2p0 + - const: m2p1 + - const: m2p2 + - const: m2p3 + - const: m2p4 + - const: m2p5 + - const: m2p6 + - const: m2p7 + - const: m2p8 + - const: m2p9 + + interrupts: + items: + - description: m2p0 channel interrupt + - description: m2p1 channel interrupt + - description: m2p2 channel interrupt + - description: m2p3 channel interrupt + - description: m2p4 channel interrupt + - description: m2p5 channel interrupt + - description: m2p6 channel interrupt + - description: m2p7 channel interrupt + - description: m2p8 channel interrupt + - description: m2p9 channel interrupt + + '#dma-cells': + const: 2 + description: | + The first cell is the unique device channel number as indicated by this + table for ep93xx: + + 0: I2S channel 1 + 1: I2S channel 2 (unused) + 2: AC97 channel 1 (unused) + 3: AC97 channel 2 (unused) + 4: AC97 channel 3 (unused) + 5: I2S channel 3 (unused) + 6: UART1 (unused) + 7: UART2 (unused) + 8: UART3 (unused) + 9: IRDA (unused) + + The second cell is the DMA direction line number: + + 1: Memory to device + 2: Device to memory + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + dma-controller@80000000 { + compatible = "cirrus,ep9301-dma-m2p"; + reg = <0x80000000 0x0040>, + <0x80000040 0x0040>, + <0x80000080 0x0040>, + <0x800000c0 0x0040>, + <0x80000240 0x0040>, + <0x80000200 0x0040>, + <0x800002c0 0x0040>, + <0x80000280 0x0040>, + <0x80000340 0x0040>, + <0x80000300 0x0040>; + clocks = <&syscon EP93XX_CLK_M2P0>, + <&syscon EP93XX_CLK_M2P1>, + <&syscon EP93XX_CLK_M2P2>, + <&syscon EP93XX_CLK_M2P3>, + <&syscon EP93XX_CLK_M2P4>, + <&syscon EP93XX_CLK_M2P5>, + <&syscon EP93XX_CLK_M2P6>, + <&syscon EP93XX_CLK_M2P7>, + <&syscon EP93XX_CLK_M2P8>, + <&syscon EP93XX_CLK_M2P9>; + clock-names = "m2p0", "m2p1", + "m2p2", "m2p3", + "m2p4", "m2p5", + "m2p6", "m2p7", + "m2p8", "m2p9"; + interrupt-parent = <&vic0>; + interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + #dma-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52d..072b3c0c5fd0 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -37,6 +37,11 @@ properties: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + required: - compatible - interrupts @@ -58,5 +63,11 @@ examples: interrupt-parent = <&msmgpio>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt deleted file mode 100644 index dfc14f71e81f..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt +++ /dev/null @@ -1,21 +0,0 @@ -USB GPIO Extcon device - -This is a virtual device used to generate USB cable states from the USB ID pin -connected to a GPIO pin. - -Required properties: -- compatible: Should be "linux,extcon-usb-gpio" - -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. -- id-gpio: gpio for USB ID pin. See gpio binding. -- vbus-gpio: gpio for USB VBUS pin. - -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: - extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; - } - - &omap_dwc3_1 { - extcon = <&extcon_usb1>; - }; diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml new file mode 100644 index 000000000000..8856107bdd33 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB GPIO Extcon device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + This is a virtual device used to generate USB cable states from the USB ID pin + connected to a GPIO pin. + +properties: + compatible: + const: linux,extcon-usb-gpio + + id-gpios: + description: gpio for USB ID pin. See gpio binding. + vbus-gpios: + description: gpio for USB VBUS pin. + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml index daadfb4926c3..3a1079d6ee20 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml @@ -73,9 +73,10 @@ examples: reg-names = "data", "dir", "intr"; gpio-controller; #gpio-cells = <2>; - interrupt-controller; - interrupt-parent = <&vic1>; - interrupts = <27>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <27>; }; gpio@80840004 { @@ -87,6 +88,7 @@ examples: gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&vic1>; interrupts = <27>; }; @@ -127,6 +129,7 @@ examples: gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupts-extended = <&vic0 19>, <&vic0 20>, <&vic0 21>, <&vic0 22>, <&vic1 15>, <&vic1 16>, diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml new file mode 100644 index 000000000000..f1ff5ff4f478 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl380.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL380/382 3-Axis Digital Accelerometer + +maintainers: + - Ramona Gradinariu <ramona.gradinariu@analog.com> + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The ADXL380/ADXL382 is a low noise density, low power, 3-axis + accelerometer with selectable measurement ranges. The ADXL380 + supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports + ±15 g, ±30 g, and ±60 g ranges. + + https://www.analog.com/en/products/adxl380.html + +properties: + compatible: + enum: + - adi,adxl380 + - adi,adxl382 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [INT0, INT1] + - const: INT1 + + vddio-supply: true + + vsupply-supply: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - vddio-supply + - vsupply-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@54 { + compatible = "adi,adxl380"; + reg = <0x54>; + vddio-supply = <&vddio>; + vsupply-supply = <&vsupply>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT0"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl380"; + reg = <0>; + spi-max-frequency = <8000000>; + vddio-supply = <&vddio>; + vsupply-supply = <&vsupply>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT0"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml index 6ddb03f61bd9..951a3a2ba8fc 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml @@ -16,6 +16,7 @@ properties: - kionix,kxcj91008 - kionix,kxtj21009 - kionix,kxtf9 + - kionix,kx022-1020 - kionix,kx023-1025 reg: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml new file mode 100644 index 000000000000..310f046e139f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + A family of similar multi-channel analog to digital converters with SPI bus. + + * https://www.analog.com/en/products/ad4695.html + * https://www.analog.com/en/products/ad4696.html + * https://www.analog.com/en/products/ad4697.html + * https://www.analog.com/en/products/ad4698.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad4695 + - adi,ad4696 + - adi,ad4697 + - adi,ad4698 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 80000000 + + spi-cpol: true + spi-cpha: true + + spi-rx-bus-width: + minimum: 1 + maximum: 4 + + avdd-supply: + description: Analog power supply. + + vio-supply: + description: I/O pin power supply. + + ldo-in-supply: + description: Internal LDO Input. Mutually exclusive with vdd-supply. + + vdd-supply: + description: Core power supply. Mutually exclusive with ldo-in-supply. + + ref-supply: + description: + External reference voltage. Mutually exclusive with refin-supply. + + refin-supply: + description: + Internal reference buffer input. Mutually exclusive with ref-supply. + + com-supply: + description: Common voltage supply for pseudo-differential analog inputs. + + adi,no-ref-current-limit: + $ref: /schemas/types.yaml#/definitions/flag + description: + When this flag is present, the REF Overvoltage Reduced Current protection + is disabled. + + adi,no-ref-high-z: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable this flag if the ref-supply requires Reference Input High-Z Mode + to be disabled for proper operation. + + cnv-gpios: + description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS. + maxItems: 1 + + reset-gpios: + description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW. + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY). + - description: Signal coming from the GP2 pin (ALERT). + - description: Signal coming from the GP3 pin (BUSY). + + interrupt-names: + minItems: 1 + items: + - const: gp0 + - const: gp2 + - const: gp3 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the GPn number: 0 to 3. + The second cell takes standard GPIO flags. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^in(?:[13579]|1[135])-supply$": + description: + Optional voltage supply for odd numbered channels when they are used as + the negative input for a pseudo-differential channel. + + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + description: + Describes each individual channel. In addition the properties defined + below, bipolar from adc.yaml is also supported. + + properties: + reg: + maximum: 15 + + common-mode-channel: + description: + Describes the common mode channel for single channels. 0xFF is REFGND + and OxFE is COM. Macros are available for these values in + dt-bindings/iio/adi,ad4695.h. Values 1 to 15 correspond to INx inputs. + Only odd numbered INx inputs can be used as common mode channels. + enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF] + default: 0xFF + + adi,no-high-z: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable this flag if the input pin requires the Analog Input High-Z + Mode to be disabled for proper operation. + + required: + - reg + + allOf: + # bipolar mode can't be used with REFGND + - if: + properties: + common-mode-channel: + const: 0xFF + then: + properties: + bipolar: false + +required: + - compatible + - reg + - avdd-supply + - vio-supply + +allOf: + - oneOf: + - required: + - ldo-in-supply + - required: + - vdd-supply + + - oneOf: + - required: + - ref-supply + - required: + - refin-supply + + # the internal reference buffer always requires high-z mode + - if: + required: + - refin-supply + then: + properties: + adi,no-ref-high-z: false + + # limit channels for 8-channel chips + - if: + properties: + compatible: + contains: + enum: + - adi,ad4697 + - adi,ad4698 + then: + patternProperties: + "^in(?:9|1[135])-supply$": false + "^channel@[0-7]$": + properties: + reg: + maximum: 7 + common-mode-channel: + enum: [1, 3, 5, 7, 0xFE, 0xFF] + "^channel@[8-9a-f]$": false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/iio/adi,ad4695.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4695"; + reg = <0>; + spi-cpol; + spi-cpha; + spi-max-frequency = <80000000>; + avdd-supply = <&power_supply>; + ldo-in-supply = <&power_supply>; + vio-supply = <&io_supply>; + refin-supply = <&supply_5V>; + com-supply = <&supply_2V5>; + in3-supply = <&supply_2V5>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Pseudo-differential channel between IN0 and REFGND. */ + channel@0 { + reg = <0>; + }; + + /* Pseudo-differential channel between IN1 and COM. */ + channel@1 { + reg = <1>; + common-mode-channel = <AD4695_COMMON_MODE_COM>; + bipolar; + }; + + /* Pseudo-differential channel between IN2 and IN3. */ + channel@2 { + reg = <2>; + common-mode-channel = <3>; + bipolar; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 190889c7b62a..66dd1c549bd3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -39,11 +39,21 @@ properties: clocks: maxItems: 1 - description: phandle to the master clock (mclk) + description: + Optionally, either a crystal can be attached externally between MCLK1 and + MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2 + pin. If absent, internal 4.92MHz clock is used, which can be made + available on MCLK2 pin. clock-names: - items: - - const: mclk + enum: + - xtal + - mclk + + "#clock-cells": + const: 0 + description: + If present when internal clock is used, configured as clock provider. interrupts: maxItems: 1 @@ -134,8 +144,6 @@ patternProperties: required: - compatible - reg - - clocks - - clock-names - interrupts - dvdd-supply - avdd-supply @@ -156,6 +164,18 @@ allOf: then: patternProperties: "^channel@[0-9a-f]+$": false + - if: + anyOf: + - required: + - clocks + - required: + - clock-names + then: + properties: + "#clock-cells": false + required: + - clocks + - clock-names unevaluatedProperties: false @@ -201,8 +221,7 @@ examples: spi-max-frequency = <1000000>; spi-cpol; spi-cpha; - clocks = <&ad7192_mclk>; - clock-names = "mclk"; + #clock-cells = <0>; interrupts = <25 0x2>; interrupt-parent = <&gpio>; aincom-supply = <&aincom>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml index 899b777017ce..bd19abb867d9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -15,10 +15,17 @@ description: | * https://www.analog.com/en/products/ad7381.html * https://www.analog.com/en/products/ad7383.html * https://www.analog.com/en/products/ad7384.html + * https://www.analog.com/en/products/ad7386.html + * https://www.analog.com/en/products/ad7387.html + * https://www.analog.com/en/products/ad7388.html * https://www.analog.com/en/products/ad7380-4.html * https://www.analog.com/en/products/ad7381-4.html * https://www.analog.com/en/products/ad7383-4.html * https://www.analog.com/en/products/ad7384-4.html + * https://www.analog.com/en/products/ad7386-4.html + * https://www.analog.com/en/products/ad7387-4.html + * https://www.analog.com/en/products/ad7388-4.html + $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -29,10 +36,16 @@ properties: - adi,ad7381 - adi,ad7383 - adi,ad7384 + - adi,ad7386 + - adi,ad7387 + - adi,ad7388 - adi,ad7380-4 - adi,ad7381-4 - adi,ad7383-4 - adi,ad7384-4 + - adi,ad7386-4 + - adi,ad7387-4 + - adi,ad7388-4 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 00fdaed11cbd..69408cae3db9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -35,65 +35,83 @@ properties: avcc-supply: true + vdrive-supply: + description: + Determines the voltage level at which the interface logic pins will + operate. + + refin-supply: + description: + The voltage supply for optional external reference voltage. + interrupts: + description: + The BUSY pin falling edge indicates that the conversion is over, and thus + new data is available. maxItems: 1 adi,conversion-start-gpios: description: - Must be the device tree identifier of the CONVST pin. - This logic input is used to initiate conversions on the analog - input channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - maxItems: 1 + Must be the device tree identifier of the CONVST pin(s). This logic input + is used to initiate conversions on the analog input channels. As the line + is active high, it should be marked GPIO_ACTIVE_HIGH. + minItems: 1 + maxItems: 2 reset-gpios: description: - Must be the device tree identifier of the RESET pin. If specified, - it will be asserted during driver probe. As the line is active high, - it should be marked GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the RESET pin. If specified, it will + be asserted during driver probe. On the AD7606x, as the line is active + high, it should be marked GPIO_ACTIVE_HIGH. On the AD7616, as the line is + active low, it should be marked GPIO_ACTIVE_LOW. maxItems: 1 standby-gpios: description: - Must be the device tree identifier of the STBY pin. This pin is used - to place the AD7606 into one of two power-down modes, Standby mode or + Must be the device tree identifier of the STBY pin. This pin is used to + place the AD7606 into one of two power-down modes, Standby mode or Shutdown mode. As the line is active low, it should be marked GPIO_ACTIVE_LOW. maxItems: 1 adi,first-data-gpios: description: - Must be the device tree identifier of the FRSTDATA pin. - The FRSTDATA output indicates when the first channel, V1, is - being read back on either the parallel, byte or serial interface. - As the line is active high, it should be marked GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA + output indicates when the first channel, V1, is being read back on either + the parallel, byte or serial interface. As the line is active high, it + should be marked GPIO_ACTIVE_HIGH. maxItems: 1 adi,range-gpios: description: - Must be the device tree identifier of the RANGE pin. The polarity on - this pin determines the input range of the analog input channels. If - this pin is tied to a logic high, the analog input range is ±10V for - all channels. If this pin is tied to a logic low, the analog input range + Must be the device tree identifier of the RANGE pin. The state on this + pin determines the input range of the analog input channels. If this pin + is tied to a logic high, the analog input range is ±10V for all channels. + On the AD760X, if this pin is tied to a logic low, the analog input range is ±5V for all channels. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. - maxItems: 1 + GPIO_ACTIVE_HIGH. On the AD7616, there are 2 pins, and if the 2 pins are + tied to a logic high, software mode is enabled, otherwise one of the 3 + possible range values is selected. + minItems: 1 + maxItems: 2 adi,oversampling-ratio-gpios: description: - Must be the device tree identifier of the over-sampling - mode pins. As the line is active high, it should be marked - GPIO_ACTIVE_HIGH. + Must be the device tree identifier of the over-sampling mode pins. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. On the AD7606X + parts that support it, if all 3 pins are tied to a logic high, software + mode is enabled. maxItems: 3 adi,sw-mode: description: - Software mode of operation, so far available only for ad7616 and ad7606b. - It is enabled when all three oversampling mode pins are connected to - high level. The device is configured by the corresponding registers. If the - adi,oversampling-ratio-gpios property is defined, then the driver will set the - oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired - to VDD. + Software mode of operation, so far available only for AD7616 and AD7606B. + It is enabled when all three oversampling mode pins are connected to high + level for the AD7606B, or both the range selection are connected to high + level for the AD7616. The device is configured by the corresponding + registers. If the adi,oversampling-ratio-gpios property is defined, then + the driver will set the oversampling gpios to high. Otherwise, it is + assumed that the pins are hardwired to VDD. type: boolean required: @@ -101,12 +119,57 @@ required: - reg - spi-cpha - avcc-supply + - vdrive-supply - interrupts - adi,conversion-start-gpios allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: adi,ad7616 + then: + properties: + adi,first-data-gpios: false + standby-gpios: false + adi,range-gpios: + maxItems: 2 + else: + properties: + adi,range-gpios: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7616 + then: + properties: + adi,oversampling-ratio-gpios: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7606-4 + - adi,ad7606-6 + - adi,ad7606-8 + then: + properties: + adi,sw-mode: false + else: + properties: + adi,conversion-start-gpios: + maxItems: 1 + unevaluatedProperties: false examples: @@ -125,6 +188,7 @@ examples: spi-cpha; avcc-supply = <&adc_vref>; + vdrive-supply = <&vdd_supply>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio>; @@ -136,7 +200,6 @@ examples: <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 26 GPIO_ACTIVE_HIGH>; standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - adi,sw-mode; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index eecd5fbab695..2606c0c5dfc6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -28,6 +28,9 @@ properties: - adi,ad9265 - adi,ad9434 - adi,ad9467 + - adi,ad9643 + - adi,ad9649 + - adi,ad9652 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml new file mode 100644 index 000000000000..12e56b1b3d3f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1921.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1921 High-Side Power/Current Monitor with Anaog Output + +maintainers: + - Matteo Martelli <matteomartelli3@gmail.com> + +description: | + The PAC1921 is a power/current monitoring device with an analog output + and I2C/SMBus interface. + + Datasheet can be found here: + https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf + +properties: + compatible: + const: microchip,pac1921 + + reg: + maxItems: 1 + + vdd-supply: true + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + label: + description: Unique name to identify which device this is. + + read-integrate-gpios: + description: + READ/INT input pin to control the current state of the device, either in + the INTEGRATE state when driven high, or in the READ state when driven low. + When not connected the pin is floating and it can be overridden by the + INT_EN register bit after asserting the READ/INT_OVR register bit. + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + - shunt-resistor-micro-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@4c { + compatible = "microchip,pac1921"; + reg = <0x4c>; + vdd-supply = <&vdd>; + #io-channel-cells = <1>; + label = "vbat"; + shunt-resistor-micro-ohms = <10000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index aa24b841393c..fd93ed3991e0 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -17,6 +17,9 @@ properties: - const: rockchip,rk3399-saradc - const: rockchip,rk3588-saradc - items: + - const: rockchip,rk3576-saradc + - const: rockchip,rk3588-saradc + - items: - enum: - rockchip,px30-saradc - rockchip,rk3308-saradc diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml index cab0d425eaa4..c3a116427dc3 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml @@ -18,18 +18,39 @@ properties: - sd-modulator - ads1201 + '#io-backend-cells': + const: 0 + '#io-channel-cells': const: 0 + vref-supply: + description: Phandle to the vref input analog reference voltage. + +dependencies: + vref-supply: [ '#io-backend-cells' ] + required: - compatible - - '#io-channel-cells' + +anyOf: + - required: ['#io-backend-cells'] + - required: ['#io-channel-cells'] additionalProperties: false examples: - | - ads1202: adc { + // Backend binding example. SD modulator configured as an IIO backend device + ads1201_0: adc { + compatible = "sd-modulator"; + vref-supply = <&vdd_adc>; + #io-backend-cells = <0>; + }; + + - | + // Legacy binding example. SD modulator configured as an IIO channel provider + ads1201_1: adc { compatible = "sd-modulator"; #io-channel-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml new file mode 100644 index 000000000000..f652b98615f7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/sophgo,cv1800b-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Sophgo CV1800B SoC 3 channels Successive Approximation Analog to + Digital Converters + +maintainers: + - Thomas Bonnefille <thomas.bonnefille@bootlin.com> + +description: + Datasheet at https://github.com/sophgo/sophgo-doc/releases + +properties: + compatible: + const: sophgo,cv1800b-saradc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-2]$": + $ref: adc.yaml + + properties: + reg: + items: + - minimum: 0 + maximum: 2 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sophgo,cv1800.h> + #include <dt-bindings/interrupt-controller/irq.h> + adc@30f0000 { + compatible = "sophgo,cv1800b-saradc"; + reg = <0x030f0000 0x1000>; + clocks = <&clk CLK_SARADC>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index ec34c48d4878..ef9dcc365eab 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -54,7 +54,9 @@ properties: It's not present on stm32f4. It's required on stm32h7 and stm32mp1. - clock-names: true + clock-names: + minItems: 1 + maxItems: 2 st,max-clk-rate-hz: description: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 2722edab1d9a..c24ac98bbb3d 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,9 +102,11 @@ patternProperties: items: minimum: 0 maximum: 7 + deprecated: true st,adc-channel-names: description: List of single-ended channel names. + deprecated: true st,filter-order: description: | @@ -118,6 +120,12 @@ patternProperties: "#io-channel-cells": const: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + st,adc-channel-types: description: | Single-ended channel input type. @@ -128,6 +136,7 @@ patternProperties: items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-channel-clk-src: description: | @@ -139,6 +148,7 @@ patternProperties: items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-alt-channel: description: @@ -147,6 +157,7 @@ patternProperties: If not set, channel n is connected to SPI input n. If set, channel n is connected to SPI input n + 1. type: boolean + deprecated: true st,filter0-sync: description: @@ -165,11 +176,60 @@ patternProperties: - compatible - reg - interrupts - - st,adc-channels - - st,adc-channel-names - st,filter-order - "#io-channel-cells" + patternProperties: + "^channel@[0-7]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + description: Represents the external channels which are connected to the DFSDM. + + properties: + reg: + maximum: 7 + + label: + description: + Unique name to identify which channel this is. + + st,adc-channel-type: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + $ref: /schemas/types.yaml#/definitions/string + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + $ref: /schemas/types.yaml#/definitions/string + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + io-backends: + description: + Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel. + maxItems: 1 + + required: + - reg + allOf: - if: properties: @@ -199,9 +259,19 @@ patternProperties: description: From common IIO binding. Used to pipe external sigma delta modulator or internal ADC output to DFSDM channel. + deprecated: true - required: - - io-channels + if: + required: + - st,adc-channels + then: + required: + - io-channels + + patternProperties: + "^channel@[0-7]$": + required: + - io-backends - if: properties: @@ -298,6 +368,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + // Example 1: Audio use case with generic binding dfsdm0: filter@0 { compatible = "st,stm32-dfsdm-dmic"; reg = <0>; @@ -305,12 +376,18 @@ examples: dmas = <&dmamux1 101 0x400 0x01>; dma-names = "rx"; #io-channel-cells = <1>; - st,adc-channels = <1>; - st,adc-channel-names = "dmic0"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; + #address-cells = <1>; + #size-cells = <0>; st,filter-order = <5>; + channel@1 { + reg = <1>; + label = "dmic0"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + }; + asoc_pdm0: dfsdm-dai { compatible = "st,stm32h7-dfsdm-dai"; #sound-dai-cells = <0>; @@ -318,19 +395,34 @@ examples: }; }; - dfsdm_pdm1: filter@1 { + // Example 2: Analog use case with generic binding + dfsdm1: filter@1 { compatible = "st,stm32-dfsdm-adc"; reg = <1>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dmamux1 102 0x400 0x01>; dma-names = "rx"; - #io-channel-cells = <1>; - st,adc-channels = <2 3>; - st,adc-channel-names = "in2", "in3"; - st,adc-channel-types = "SPI_R", "SPI_R"; - st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; - io-channels = <&sd_adc2 &sd_adc3>; st,filter-order = <1>; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + channel@2 { + reg = <2>; + label = "in2"; + st,adc-channel-type = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + io-backends = <&sd_adc2>; + }; + + channel@3 { + reg = <3>; + label = "in3"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + io-backends = <&sd_adc3>; + }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index d40689f233f2..1caa896fce82 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -37,6 +37,17 @@ description: | 3 | batt_dischrg_i 4 | ts_v + AXP717 + ------ + 0 | batt_v + 1 | ts_v + 2 | vbus_v + 3 | vsys_v + 4 | pmic_temp + 5 | batt_chrg_i + 6 | vmid_v + 7 | bkup_batt_v + AXP813 ------ 0 | pmic_temp @@ -52,6 +63,7 @@ properties: oneOf: - const: x-powers,axp209-adc - const: x-powers,axp221-adc + - const: x-powers,axp717-adc - const: x-powers,axp813-adc - items: diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml new file mode 100644 index 000000000000..33490853497b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2664 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf + +properties: + compatible: + enum: + - adi,ltc2664 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-pos-supply: + description: Positive Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active-low Asynchronous Clear Input. A logic low at this level-triggered + input clears the part to the reset code and range determined by the + hardwired option chosen using the MSPAN pins. The control registers are + cleared to zero. + maxItems: 1 + + adi,manual-span-operation-config: + description: + This property must mimic the MSPAN pin configurations. By tying the MSPAN + pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be + hardware-configured with different mid-scale or zero-scale reset options. + The hardware configuration is latched during power on reset for proper + operation. + 0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V) + 1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V) + 2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V) + 3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V) + 4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V) + 5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V) + 6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V) + 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 7 + + io-channels: + description: + ADC channel to monitor voltages and temperature at the MUXOUT pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-3]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 3 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microvolt: + description: + This property is only allowed when SoftSpan is enabled. If not present, + [0, 5000000] is the default output range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -2500000 + - const: 2500000 + + required: + - reg + + allOf: + - if: + not: + properties: + adi,manual-span-operation-config: + const: 7 + then: + patternProperties: + "^channel@[0-3]$": + properties: + output-range-microvolt: false + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-pos-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2664"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-pos-supply = <&vpos>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microvolt = <(-10000000) 10000000>; + }; + + channel@1 { + reg = <1>; + output-range-microvolt= <0 10000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml new file mode 100644 index 000000000000..c8c434c10643 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2672 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf + +properties: + compatible: + enum: + - adi,ltc2672 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + vdd0-supply: + description: Positive Supply Voltage Input for DAC OUT0. + + vdd1-supply: + description: Positive Supply Voltage Input for DAC OUT1. + + vdd2-supply: + description: Positive Supply Voltage Input for DAC OUT2. + + vdd3-supply: + description: Positive Supply Voltage Input for DAC OUT3. + + vdd4-supply: + description: Positive Supply Voltage Input for DAC OUT4. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active Low Asynchronous Clear Input. A logic low at this level triggered + input clears the device to the default reset code and output range, which + is zero-scale with the outputs off. The control registers are cleared to + zero. + maxItems: 1 + + adi,rfsadj-ohms: + description: + If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which + results in nominal output ranges. When an external resistor of 19 kΩ to + 41 kΩ can be used instead by connecting the resistor between FSADJ and GND + it controls the scaling of the ranges, and the internal resistor is + automatically disconnected. + minimum: 19000 + maximum: 41000 + default: 20000 + + io-channels: + description: + ADC channel to monitor voltages and currents at the MUX pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 4 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microamp: + items: + - const: 0 + - enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000, + 200000000, 300000000] + + required: + - reg + - output-range-microamp + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2672"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microamp = <0 3125000>; + }; + + channel@1 { + reg = <1>; + output-range-microamp = <0 6250000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/dac.yaml b/Documentation/devicetree/bindings/iio/dac/dac.yaml new file mode 100644 index 000000000000..daa40724e1cf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/dac.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IIO Common Properties for DAC Channels + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + A few properties are defined in a common way for DAC channels. + +properties: + $nodename: + pattern: "^channel(@[0-9a-f]+)?$" + description: + A channel index should match reg. + + reg: + maxItems: 1 + + label: + description: Unique name to identify which channel this is. + + output-range-microamp: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microamperes. + + output-range-microvolt: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microvolts. + +anyOf: + - oneOf: + - required: + - reg + - output-range-microamp + - required: + - reg + - output-range-microvolt + - required: + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml index aa6a3193b4e0..5f950ee9aec7 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml @@ -17,6 +17,7 @@ description: | applications. https://www.analog.com/en/products/adf4377.html + https://www.analog.com/en/products/adf4378.html properties: compatible: @@ -73,6 +74,15 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,adf4378 + then: + properties: + clk2-enable-gpios: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml new file mode 100644 index 000000000000..ed0ea938f7f8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/sciosense,ens210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ScioSense ENS210 temperature and humidity sensor + +maintainers: + - Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk> + +description: | + Temperature and Humidity sensor. + + Datasheet: + https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf + https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf + +properties: + compatible: + oneOf: + - items: + - enum: + - sciosense,ens210a + - sciosense,ens211 + - sciosense,ens212 + - sciosense,ens213a + - sciosense,ens215 + - const: sciosense,ens210 + - const: sciosense,ens210 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@43 { + compatible = "sciosense,ens210"; + reg = <0x43>; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml index 7de1b0e721ca..877e955d4ebd 100644 --- a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -14,7 +14,9 @@ description: properties: compatible: - const: liteon,ltrf216a + enum: + - liteon,ltr308 + - liteon,ltrf216a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml new file mode 100644 index 000000000000..44896795c67e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bh1745.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BH1745 colour sensor + +maintainers: + - Mudit Sharma <muditsharma.info@gmail.com> + +description: + BH1745 is an I2C colour sensor with red, green, blue and clear + channels. It has a programmable active low interrupt pin. + Interrupt occurs when the signal from the selected interrupt + source channel crosses set interrupt threshold high/low level. + +properties: + compatible: + const: rohm,bh1745 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + colour-sensor@38 { + compatible = "rohm,bh1745"; + reg = <0x38>; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vdd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml index 30a109a1bf3b..29c90ca5b258 100644 --- a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml @@ -1,23 +1,22 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml# +$id: http://devicetree.org/schemas/iio/light/rohm,bu27034anuc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BU27034 ambient light sensor +title: ROHM BU27034ANUC ambient light sensor maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes + ROHM BU27034ANUC is an ambient light sensor with 2 channels and 2 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. - https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf properties: compatible: - const: rohm,bu27034 + const: rohm,bu27034anuc reg: maxItems: 1 @@ -37,7 +36,7 @@ examples: #size-cells = <0>; light-sensor@38 { - compatible = "rohm,bu27034"; + compatible = "rohm,bu27034anuc"; reg = <0x38>; vdd-supply = <&vdd>; }; diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml index f6e22dc9814a..e4341fdced98 100644 --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -18,10 +18,15 @@ allOf: properties: compatible: - enum: - - sensortek,stk3310 - - sensortek,stk3311 - - sensortek,stk3335 + oneOf: + - enum: + - sensortek,stk3310 + - sensortek,stk3311 + - sensortek,stk3335 + - items: + - enum: + - sensortek,stk3013 + - const: sensortek,stk3310 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index 9790f75fc669..e8ca9a234027 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -18,12 +18,15 @@ properties: - asahi-kasei,ak09911 - asahi-kasei,ak09912 - asahi-kasei,ak09916 + - items: + # ak09918 is register compatible with ak09912. + - const: asahi-kasei,ak09918 + - const: asahi-kasei,ak09912 - enum: - ak8975 - ak8963 - ak09911 - ak09912 - - ak09916 deprecated: true reg: diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml index 2867ab6bf9b0..a3838ab0c524 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml @@ -36,6 +36,9 @@ properties: interrupts: maxItems: 1 + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml new file mode 100644 index 000000000000..813239f6879a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/sensirion,sdp500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: sdp500/sdp510 pressure sensor with I2C bus interface + +maintainers: + - Petar Stoykov <petar.stoykov@prodrive-technologies.com> + +description: | + Pressure sensor from Sensirion with I2C bus interface. + There is no software difference between sdp500 and sdp510. + +properties: + compatible: + oneOf: + - items: + - const: sensirion,sdp510 + - const: sensirion,sdp500 + - const: sensirion,sdp500 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure@40 { + compatible = "sensirion,sdp500"; + reg = <0x40>; + vdd-supply = <&foo>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml new file mode 100644 index 000000000000..7a83ceced11c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/awinic,aw96103.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic's AW96103 capacitive proximity sensor and similar + +maintainers: + - Wang Shuaijie <wangshuaijie@awinic.com> + +description: | + Awinic's AW96103/AW96105 proximity sensor. + The specific absorption rate (SAR) is a metric that measures + the degree of absorption of electromagnetic radiation emitted by + wireless devices, such as mobile phones and tablets, by human tissue. + In mobile phone applications, the proximity sensor is primarily + used to detect the proximity of the human body to the phone. When the + phone approaches the human body, it will actively reduce the transmit + power of the antenna to keep the SAR within a safe range. Therefore, + we also refer to the proximity sensor as a SAR sensor. + +properties: + compatible: + enum: + - awinic,aw96103 + - awinic,aw96105 + + reg: + maxItems: 1 + + interrupts: + description: + Generated by the device to announce that a close/far + proximity event has happened. + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - reg + - interrupts + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@12 { + compatible = "awinic,aw96103"; + reg = <0x12>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&pp1800_prox>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml new file mode 100644 index 000000000000..64ce8bc8bd36 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TYHX HX9023S capacitive proximity sensor + +maintainers: + - Yasin Lee <yasin.lee.x@gmail.com> + +description: | + TYHX HX9023S proximity sensor. Datasheet can be found here: + http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf + +properties: + compatible: + const: tyhx,hx9023s + + reg: + maxItems: 1 + + interrupts: + description: + Generated by device to announce preceding read request has finished + and data is available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: /schemas/iio/adc/adc.yaml + type: object + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 4 + description: The channel number. + +required: + - compatible + - reg + - vdd-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@2a { + compatible = "tyhx,hx9023s"; + reg = <0x2a>; + interrupt-parent = <&pio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pp1800_prox>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + single-channel = <0>; + }; + channel@1 { + reg = <1>; + single-channel = <1>; + }; + channel@2 { + reg = <2>; + single-channel = <2>; + }; + channel@3 { + reg = <3>; + diff-channels = <1 0>; + }; + channel@4 { + reg = <4>; + diff-channels = <2 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml new file mode 100644 index 000000000000..a0d2460c55ab --- /dev/null +++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus ep93xx keypad + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + +allOf: + - $ref: /schemas/input/matrix-keymap.yaml# + +description: + The KPP is designed to interface with a keypad matrix with 2-point contact + or 3-point contact keys. The KPP is designed to simplify the software task + of scanning a keypad matrix. The KPP is capable of detecting, debouncing, + and decoding one or multiple keys pressed simultaneously on a keypad. + +properties: + compatible: + oneOf: + - const: cirrus,ep9307-keypad + - items: + - enum: + - cirrus,ep9312-keypad + - cirrus,ep9315-keypad + - const: cirrus,ep9307-keypad + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + debounce-delay-ms: + description: | + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + + cirrus,prescale: + description: row/column counter pre-scaler load value + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 1023 + +required: + - compatible + - reg + - interrupts + - clocks + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + keypad@800f0000 { + compatible = "cirrus,ep9307-keypad"; + reg = <0x800f0000 0x0c>; + interrupt-parent = <&vic0>; + interrupts = <29>; + clocks = <&eclk EP93XX_CLK_KEYPAD>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default_pins>; + linux,keymap = <KEY_UP>, + <KEY_DOWN>, + <KEY_VOLUMEDOWN>, + <KEY_HOME>, + <KEY_RIGHT>, + <KEY_LEFT>, + <KEY_ENTER>, + <KEY_VOLUMEUP>, + <KEY_F6>, + <KEY_F8>, + <KEY_F9>, + <KEY_F10>, + <KEY_F1>, + <KEY_F2>, + <KEY_F3>, + <KEY_POWER>; + }; diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml deleted file mode 100644 index a7d42a5d6128..000000000000 --- a/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml +++ /dev/null @@ -1,71 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/goodix,gt7986u.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: GOODIX GT7986U SPI HID Touchscreen - -maintainers: - - Charles Wang <charles.goodix@gmail.com> - -description: Supports the Goodix GT7986U touchscreen. - This touch controller reports data packaged according to the HID protocol, - but is incompatible with Microsoft's HID-over-SPI protocol. - -allOf: - - $ref: /schemas/spi/spi-peripheral-props.yaml# - -properties: - compatible: - enum: - - goodix,gt7986u - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - - goodix,hid-report-addr: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The register address for retrieving HID report data. - This address is related to the device firmware and may - change after a firmware update. - - spi-max-frequency: true - -additionalProperties: false - -required: - - compatible - - reg - - interrupts - - reset-gpios - - goodix,hid-report-addr - -examples: - - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/gpio/gpio.h> - - spi { - #address-cells = <1>; - #size-cells = <0>; - - touchscreen@0 { - compatible = "goodix,gt7986u"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - spi-max-frequency = <10000000>; - goodix,hid-report-addr = <0x22c8c>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml index fd15ab5014fb..4b08be72bbd7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm MSM8939 Network-On-Chip interconnect +title: Qualcomm MSM8937/MSM8939/MSM8976 Network-On-Chip interconnect maintainers: - Konrad Dybcio <konradybcio@kernel.org> -description: | - The Qualcomm MSM8939 interconnect providers support adjusting the - bandwidth requirements between the various NoC fabrics. +description: + The Qualcomm MSM8937/MSM8939/MSM8976 interconnect providers support + adjusting the bandwidth requirements between the various NoC fabrics. allOf: - $ref: qcom,rpm-common.yaml# @@ -19,9 +19,15 @@ allOf: properties: compatible: enum: + - qcom,msm8937-bimc + - qcom,msm8937-pcnoc + - qcom,msm8937-snoc - qcom,msm8939-bimc - qcom,msm8939-pcnoc - qcom,msm8939-snoc + - qcom,msm8976-bimc + - qcom,msm8976-pcnoc + - qcom,msm8976-snoc reg: maxItems: 1 @@ -39,7 +45,10 @@ patternProperties: properties: compatible: - const: qcom,msm8939-snoc-mm + enum: + - qcom,msm8937-snoc-mm + - qcom,msm8939-snoc-mm + - qcom,msm8976-snoc-mm required: - compatible @@ -60,12 +69,6 @@ examples: compatible = "qcom,msm8939-snoc"; reg = <0x00580000 0x14000>; #interconnect-cells = <1>; - }; - - bimc: interconnect@400000 { - compatible = "qcom,msm8939-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; snoc_mm: interconnect-snoc { compatible = "qcom,msm8939-snoc-mm"; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml index 732e9fa001a4..343ff62d7b65 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml @@ -13,8 +13,7 @@ description: | The Qualcomm MSM8953 interconnect providers support adjusting the bandwidth requirements between the various NoC fabrics. - See also: - - dt-bindings/interconnect/qcom,msm8953.h + See also: include/dt-bindings/interconnect/qcom,msm8953.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 2cd1f5590fd9..189f5900ee50 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - qcom,qcm2290-cpu-bwmon + - qcom,sa8775p-cpu-bwmon - qcom,sc7180-cpu-bwmon - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon @@ -39,6 +40,7 @@ properties: - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: + - qcom,sa8775p-llcc-bwmon - qcom,sc7180-llcc-bwmon - qcom,sc8280xp-llcc-bwmon - qcom,sm6350-cpu-bwmon diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 9318b845ec35..1b9164dc162f 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -71,7 +71,7 @@ properties: - qcom,sdx65-system-noc - qcom,sm8150-aggre1-noc - qcom,sm8150-aggre2-noc - - qcom,sm8150-camnoc-noc + - qcom,sm8150-camnoc-virt - qcom,sm8150-compute-noc - qcom,sm8150-config-noc - qcom,sm8150-dc-noc @@ -113,6 +113,9 @@ allOf: properties: compatible: enum: + - qcom,sc8180x-camnoc-virt + - qcom,sc8180x-mc-virt + - qcom,sc8180x-qup-virt - qcom,sdx65-mc-virt - qcom,sm8250-qup-virt then: diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml index 199b34fdbefc..7ff4efc4758a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml @@ -82,9 +82,6 @@ allOf: enum: - fsl,ls1043a-extirq - fsl,ls1046a-extirq - - fsl,ls1088a-extirq - - fsl,ls2080a-extirq - - fsl,lx2160a-extirq then: properties: interrupt-map: @@ -95,6 +92,29 @@ allOf: - const: 0xf - const: 0 + - if: + properties: + compatible: + contains: + enum: + - fsl,ls1088a-extirq + - fsl,ls2080a-extirq + - fsl,lx2160a-extirq +# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT +# function to parser interrupt-map. So it doesn't consider '#address-size' +# in parent interrupt controller, such as GIC. +# +# When dt-binding verify interrupt-map, item data matrix is spitted at +# incorrect position. Remove interrupt-map restriction because it always +# wrong. + + then: + properties: + interrupt-map-mask: + items: + - const: 0xf + - const: 0 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml index 72c1d9e82c89..8a1369df4ecb 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -17,9 +17,15 @@ description: | properties: compatible: - enum: - - mediatek,mt8195-adsp-mbox - - mediatek,mt8186-adsp-mbox + oneOf: + - enum: + - mediatek,mt8186-adsp-mbox + - mediatek,mt8195-adsp-mbox + - items: + - enum: + - mediatek,mt8188-adsp-mbox + - const: mediatek,mt8186-adsp-mbox + "#mbox-cells": const: 0 diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 05e4e1d51713..2d66770ed361 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -24,7 +24,9 @@ properties: compatible: items: - enum: + - qcom,qcs8300-ipcc - qcom,qdu1000-ipcc + - qcom,sa8255p-ipcc - qcom,sa8775p-ipcc - qcom,sc7280-ipcc - qcom,sc8280xp-ipcc diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml index 01b00d89a992..df45ff56d444 100644 --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml @@ -113,7 +113,7 @@ properties: msi-parent: deprecated: true - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: Describes the MSI controller node handling message interrupts for the MC. When there is no translation diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml index c27a8f33d8d7..0840a3d92513 100644 --- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1 memory-region: maxItems: 1 @@ -81,7 +82,7 @@ patternProperties: iommus: minItems: 1 - maxItems: 3 + maxItems: 10 qcom,nsessions: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/mtd/technologic,nand.yaml b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml new file mode 100644 index 000000000000..f9d87c46094b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/technologic,nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Technologic Systems NAND controller + +maintainers: + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: nand-controller.yaml + +properties: + compatible: + oneOf: + - const: technologic,ts7200-nand + - items: + - enum: + - technologic,ts7300-nand + - technologic,ts7260-nand + - technologic,ts7250-nand + - const: technologic,ts7200-nand + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + nand@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index 23dfe0838dca..63bee5b542f5 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -26,6 +26,7 @@ properties: - brcm,asp-v2.1-mdio - brcm,asp-v2.2-mdio - brcm,unimac-mdio + - brcm,bcm6846-mdio reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml new file mode 100644 index 000000000000..ad0915307095 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cirrus,ep9301-eth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EP93xx SoC Ethernet Controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-eth + - items: + - enum: + - cirrus,ep9302-eth + - cirrus,ep9307-eth + - cirrus,ep9312-eth + - cirrus,ep9315-eth + - const: cirrus,ep9301-eth + + reg: + items: + - description: The physical base address and size of IO range + + interrupts: + items: + - description: Combined signal for various interrupt events + + phy-handle: true + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: optional node for embedded MDIO controller + +required: + - compatible + - reg + - interrupts + - phy-handle + +additionalProperties: false + +examples: + - | + ethernet@80010000 { + compatible = "cirrus,ep9301-eth"; + reg = <0x80010000 0x10000>; + interrupt-parent = <&vic1>; + interrupts = <7>; + phy-handle = <&phy0>; + }; diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml index 3dde10de4630..4f4253441547 100644 --- a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml @@ -29,6 +29,12 @@ properties: reset-gpios: maxItems: 1 + bootloader-backdoor-gpios: + maxItems: 1 + description: | + gpios to enable bootloader backdoor in cc1352p7 bootloader to allow + flashing new firmware. + vdds-supply: true required: @@ -46,6 +52,7 @@ examples: clocks = <&sclk_hf 0>, <&sclk_lf 25>; clock-names = "sclk_hf", "sclk_lf"; reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>; + bootloader-backdoor-gpios = <&pio 36 GPIO_ACTIVE_LOW>; vdds-supply = <&vdds>; }; }; diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml index bbe89ea9590c..e95c21628281 100644 --- a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml @@ -34,6 +34,7 @@ properties: and length of the AXI DMA controller IO space, unless axistream-connected is specified, in which case the reg attribute of the node referenced by it is used. + minItems: 1 maxItems: 2 interrupts: @@ -181,7 +182,7 @@ examples: clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; phy-mode = "mii"; - reg = <0x00 0x40000000 0x00 0x40000>; + reg = <0x40000000 0x40000>; xlnx,rxcsum = <0x2>; xlnx,rxmem = <0x800>; xlnx,txcsum = <0x2>; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml index 70fb2ad25103..1b20b49eee79 100644 --- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml @@ -15,6 +15,7 @@ description: | allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index e21c06e9a741..b2cb76cf9053 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -14,7 +14,7 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs. allOf: - $ref: nvmem.yaml# @@ -36,6 +36,7 @@ properties: - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp - fsl,imx93-ocotp + - fsl,imx95-ocotp - const: syscon - items: - enum: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml index 3b40f7880774..382507060651 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml @@ -21,6 +21,7 @@ oneOf: - $ref: fixed-layout.yaml - $ref: kontron,sl28-vpd.yaml - $ref: onie,tlv-layout.yaml + - $ref: u-boot,env.yaml properties: compatible: true diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml index 9c36afc7084b..56a8f55d4a09 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml# +$id: http://devicetree.org/schemas/nvmem/layouts/u-boot,env.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: U-Boot environment variables +title: U-Boot environment variables layout description: | U-Boot uses environment variables to store device parameters and @@ -21,9 +21,6 @@ description: | This binding allows marking storage device (as containing env data) and specifying used format. - Right now only flash partition case is covered but it may be extended to e.g. - UBI volumes in the future. - Variables can be defined as NVMEM device subnodes. maintainers: @@ -42,6 +39,7 @@ properties: const: brcm,env reg: + description: Partition offset and size for env on top of MTD maxItems: 1 bootcmd: @@ -58,6 +56,17 @@ properties: description: The first argument is a MAC address offset. const: 1 +allOf: + - if: + properties: + $nodename: + not: + contains: + pattern: "^partition@[0-9a-f]+$" + then: + properties: + reg: false + additionalProperties: false examples: @@ -101,3 +110,23 @@ examples: }; }; }; + - | + partition@0 { + reg = <0x0 0x100000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-u-boot-env { + volname = "env"; + + nvmem-layout { + compatible = "u-boot,env"; + + ethaddr { + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 92bfe25f0571..3b2aa605a551 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -17,6 +17,7 @@ maintainers: allOf: - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml# properties: compatible: @@ -32,6 +33,8 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object + $ref: layouts/fixed-cell.yaml + unevaluatedProperties: false properties: st,non-secure-otp: diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml index f4b1ca2fb562..ce665a2779b7 100644 --- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml @@ -87,6 +87,12 @@ properties: maximum: 119 default: 100 + nxp,sim: + description: + The system integration module (SIM) provides system control and chip + configuration registers. + $ref: /schemas/types.yaml#/definitions/phandle + required: - compatible - reg @@ -110,6 +116,17 @@ allOf: required: - fsl,anatop + - if: + properties: + compatible: + const: fsl,imx7ulp-usbphy + then: + required: + - nxp,sim + else: + properties: + nxp,sim: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml new file mode 100644 index 000000000000..903210ef9c31 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/cirrus,ep9301-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic ep93xx PWM controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-pwm + - items: + - enum: + - cirrus,ep9302-pwm + - cirrus,ep9307-pwm + - cirrus,ep9312-pwm + - cirrus,ep9315-pwm + - const: cirrus,ep9301-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM clock + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + pwm@80910000 { + compatible = "cirrus,ep9301-pwm"; + reg = <0x80910000 0x10>; + clocks = <&syscon EP93XX_CLK_PWM>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml index 5ade5dfad048..cda8ad7c1203 100644 --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml @@ -22,6 +22,9 @@ properties: interrupts: maxItems: 1 + "#clock-cells": + const: 0 + trickle-resistor-ohms: enum: - 3000 diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc2731-rtc.yaml b/Documentation/devicetree/bindings/rtc/sprd,sc2731-rtc.yaml new file mode 100644 index 000000000000..f3d20e976965 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sprd,sc2731-rtc.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/sprd,sc2731-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC2731 Real Time Clock + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + const: sprd,sc2731-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: rtc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt deleted file mode 100644 index 1f5754299d31..000000000000 --- a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt +++ /dev/null @@ -1,26 +0,0 @@ -Spreadtrum SC27xx Real Time Clock - -Required properties: -- compatible: should be "sprd,sc2731-rtc". -- reg: address offset of rtc register. -- interrupts: rtc alarm interrupt. - -Example: - - sc2731_pmic: pmic@0 { - compatible = "sprd,sc2731"; - reg = <0>; - spi-max-frequency = <26000000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@280 { - compatible = "sprd,sc2731-rtc"; - reg = <0x280>; - interrupt-parent = <&sc2731_pmic>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 7a0fab721cf1..aae06e570c22 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -53,6 +53,28 @@ properties: override default rtc_ck parent clock phandle of the new parent clock of rtc_ck maxItems: 1 +patternProperties: + "^rtc-[a-z]+-[0-9]+$": + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml + description: | + Configuration of STM32 RTC pins description. STM32 RTC is able to output + some signals on specific pins: + - LSCO (Low Speed Clock Output) that allow to output LSE clock on a pin. + - Alarm out that allow to send a pulse on a pin when alarm A of the RTC + expires. + additionalProperties: false + properties: + function: + enum: + - lsco + - alarm-a + pins: + enum: + - out1 + - out2 + - out2_rmp + allOf: - if: properties: @@ -68,6 +90,9 @@ allOf: clock-names: false + patternProperties: + "^rtc-[a-z]+-[0-9]+$": false + required: - st,syscfg @@ -83,6 +108,9 @@ allOf: minItems: 2 maxItems: 2 + patternProperties: + "^rtc-[a-z]+-[0-9]+$": false + required: - clock-names - st,syscfg diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index fffd759c603f..7330a7200831 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -38,12 +38,13 @@ properties: - dallas,ds1672 # Extremely Accurate I²C RTC with Integrated Crystal and SRAM - dallas,ds3232 + # SD2405AL Real-Time Clock + - dfrobot,sd2405al # EM Microelectronic EM3027 RTC - emmicro,em3027 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE - epson,rx8010 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE - - epson,rx8025 - epson,rx8035 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM - epson,rx8111 @@ -52,10 +53,6 @@ properties: - epson,rx8581 # Android Goldfish Real-time Clock - google,goldfish-rtc - # Intersil ISL1208 Low Power RTC with Battery Backed SRAM - - isil,isl1208 - # Intersil ISL1218 Low Power RTC with Battery Backed SRAM - - isil,isl1218 # Mvebu Real-time Clock - marvell,orion-rtc # Maxim DS1742/DS1743 Real-time Clock @@ -68,8 +65,6 @@ properties: - microcrystal,rv8523 # NXP LPC32xx SoC Real-time Clock - nxp,lpc3220-rtc - # Real-time Clock Module - - pericom,pt7c4338 # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC - ricoh,r2025sd # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index 6a7be42da523..4b78de6b46a2 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -76,6 +76,7 @@ properties: clock-frequency: true current-speed: true overrun-throttle-ms: true + wakeup-source: true required: - compatible diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index eb2992a447d7..f466c38518c4 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -23,13 +23,20 @@ properties: - const: atmel,at91sam9260-dbgu - const: atmel,at91sam9260-usart - items: - - const: microchip,sam9x60-usart + - enum: + - microchip,sam9x60-usart + - microchip,sam9x7-usart - const: atmel,at91sam9260-usart - items: - const: microchip,sam9x60-dbgu - const: microchip,sam9x60-usart - const: atmel,at91sam9260-dbgu - const: atmel,at91sam9260-usart + - items: + - const: microchip,sam9x7-dbgu + - const: atmel,at91sam9260-dbgu + - const: microchip,sam9x7-usart + - const: atmel,at91sam9260-usart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml index ff61ffdcad1d..1b02f0b197ff 100644 --- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -36,6 +36,7 @@ properties: - mediatek,mt7622-uart - mediatek,mt7623-uart - mediatek,mt7629-uart + - mediatek,mt7981-uart - mediatek,mt7986-uart - mediatek,mt7988-uart - mediatek,mt8127-uart diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index afc7c05898a1..51d9fb0f4763 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -46,6 +46,7 @@ properties: - items: - enum: - renesas,scif-r8a774a1 # RZ/G2M + - renesas,scif-r8a774a3 # RZ/G2M v3.0 - renesas,scif-r8a774b1 # RZ/G2N - renesas,scif-r8a774c0 # RZ/G2E - renesas,scif-r8a774e1 # RZ/G2H diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 0f0131026911..788c80e47831 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -56,14 +56,8 @@ properties: maxItems: 5 clock-names: - description: N = 0 is allowed for SoCs without internal baud clock mux. minItems: 2 - items: - - const: uart - - pattern: '^clk_uart_baud[0-3]$' - - pattern: '^clk_uart_baud[0-3]$' - - pattern: '^clk_uart_baud[0-3]$' - - pattern: '^clk_uart_baud[0-3]$' + maxItems: 5 dmas: items: @@ -103,18 +97,45 @@ allOf: compatible: contains: enum: - - samsung,s5pv210-uart + - samsung,s3c6400-uart then: properties: clocks: - minItems: 2 + minItems: 3 maxItems: 3 + + clock-names: + items: + - const: uart + - const: clk_uart_baud2 + - const: clk_uart_baud3 + + else: + properties: clock-names: minItems: 2 items: - const: uart - - pattern: '^clk_uart_baud[0-1]$' - - pattern: '^clk_uart_baud[0-1]$' + - const: clk_uart_baud0 + - const: clk_uart_baud1 + - const: clk_uart_baud2 + - const: clk_uart_baud3 + + - if: + properties: + compatible: + contains: + enum: + - samsung,s5pv210-uart + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + minItems: 3 + maxItems: 3 - if: properties: @@ -129,10 +150,9 @@ allOf: properties: clocks: maxItems: 2 + clock-names: - items: - - const: uart - - const: clk_uart_baud0 + maxItems: 2 - if: properties: @@ -146,6 +166,12 @@ allOf: properties: reg-io-width: false + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + unevaluatedProperties: false examples: @@ -163,3 +189,19 @@ examples: <&clocks SCLK_UART>; samsung,uart-fifosize = <16>; }; + - | + #include <dt-bindings/clock/google,gs101.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + serial_0: serial@10a00000 { + compatible = "google,gs101-uart"; + reg = <0x10a00000 0xc0>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; + clock-names = "uart", "clk_uart_baud0"; + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-0 = <&uart0_bus>; + pinctrl-names = "default"; + samsung,uart-fifosize = <256>; + }; diff --git a/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml new file mode 100644 index 000000000000..7cb1b4114985 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/cirrus/cirrus,ep9301-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic EP93xx Platforms System Controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +description: | + Central resources are controlled by a set of software-locked registers, + which can be used to prevent accidental accesses. Syscon generates + the various bus and peripheral clocks and controls the system startup + configuration. + + The System Controller (Syscon) provides: + - Clock control + - Power management + - System configuration management + + Syscon registers are common for all EP93xx SoC's, through some actual peripheral + may be missing depending on actual SoC model. + +properties: + compatible: + oneOf: + - items: + - enum: + - cirrus,ep9302-syscon + - cirrus,ep9307-syscon + - cirrus,ep9312-syscon + - cirrus,ep9315-syscon + - const: cirrus,ep9301-syscon + - const: syscon + - items: + - const: cirrus,ep9301-syscon + - const: syscon + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + items: + - description: reference clock + +patternProperties: + '^pins-': + type: object + description: pin node + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [ spi, ac97, i2s, pwm, keypad, pata, lcd, gpio ] + + groups: + enum: [ ssp, ac97, i2s_on_ssp, i2s_on_ac97, pwm1, gpio1agrp, + gpio2agrp, gpio3agrp, gpio4agrp, gpio6agrp, gpio7agrp, + rasteronsdram0grp, rasteronsdram3grp, keypadgrp, idegrp ] + + required: + - function + - groups + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + syscon@80930000 { + compatible = "cirrus,ep9301-syscon", "syscon"; + reg = <0x80930000 0x1000>; + + #clock-cells = <1>; + clocks = <&xtali>; + + spi_default_pins: pins-spi { + function = "spi"; + groups = "ssp"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml index 453d493c941f..4693e85aed37 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml @@ -40,6 +40,20 @@ properties: - const: sclk - const: lrclk + dmas: + items: + - description: out DMA channel + - description: in DMA channel + + dma-names: + items: + - const: tx + - const: rx + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - '#sound-dai-cells' @@ -61,6 +75,8 @@ examples: <&syscon 30>, <&syscon 31>; clock-names = "mclk", "sclk", "lrclk"; + dmas = <&dma0 0 1>, <&dma0 0 2>; + dma-names = "tx", "rx"; }; ... diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml index 7735e08d35ba..ab3206ffa4af 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -102,7 +102,7 @@ properties: default: 2 interrupts: - anyOf: + oneOf: - minItems: 1 items: - description: TX interrupt diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 1d3acdc0c733..2e2e01493a5f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -30,6 +30,7 @@ properties: - qcom,apq8096-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard + - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard - qcom,sc8280xp-sndcard diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index 3bc93c59535e..6d0d1514cd42 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -302,7 +302,7 @@ allOf: reg-names: items: enum: - - scu + - sru - ssi - adg # for Gen2/Gen3 diff --git a/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml new file mode 100644 index 000000000000..73980a27dc00 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/cirrus,ep9301-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EP93xx SoC SPI controller + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + - Nikita Shubin <nikita.shubin@maquefel.me> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - const: cirrus,ep9301-spi + - items: + - enum: + - cirrus,ep9302-spi + - cirrus,ep9307-spi + - cirrus,ep9312-spi + - cirrus,ep9315-spi + - const: cirrus,ep9301-spi + + reg: + items: + - description: SPI registers region + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI Controller reference clock source + + dmas: + items: + - description: rx DMA channel + - description: tx DMA channel + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/cirrus,ep9301-syscon.h> + spi@808a0000 { + compatible = "cirrus,ep9301-spi"; + reg = <0x808a0000 0x18>; + interrupt-parent = <&vic1>; + interrupts = <21>; + clocks = <&syscon EP93XX_CLK_SPI>; + dmas = <&dma1 10 2>, <&dma1 10 1>; + dma-names = "rx", "tx"; + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 0108d7507215..9bf0fb17a05e 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -101,8 +101,6 @@ properties: - domintech,dmard09 # DMARD10: 3-axis Accelerometer - domintech,dmard10 - # Elgin SPI-controlled LCD - - elgin,jg10309-01 # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor - fsl,mma7660 # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer diff --git a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml new file mode 100644 index 000000000000..a44bdf391887 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,ls1028a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale layerscape SuperSpeed DWC3 USB SoC controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +select: + properties: + compatible: + contains: + enum: + - fsl,ls1028a-dwc3 + required: + - compatible + +properties: + compatible: + items: + - enum: + - fsl,ls1028a-dwc3 + - const: snps,dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: snps,dwc3.yaml# + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@fe800000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0xfe800000 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt deleted file mode 100644 index afc30e98b123..000000000000 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ /dev/null @@ -1,110 +0,0 @@ -MSM SoC HSUSB controllers - -EHCI - -Required properties: -- compatible: Should contain "qcom,ehci-host" -- regs: offset and length of the register set in the memory map -- usb-phy: phandle for the PHY device - -Example EHCI controller device node: - - ehci: ehci@f9a55000 { - compatible = "qcom,ehci-host"; - reg = <0xf9a55000 0x400>; - usb-phy = <&usb_otg>; - }; - -USB PHY with optional OTG: - -Required properties: -- compatible: Should contain: - "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY - "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY - -- regs: Offset and length of the register set in the memory map -- interrupts: interrupt-specifier for the OTG interrupt. - -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "phy" USB PHY reference clock - "core" Protocol engine clock - "iface" Interface bus clock - "alt_core" Protocol engine clock for targets with asynchronous - reset methodology. (optional) - -- vdccx-supply: phandle to the regulator for the vdd supply for - digital circuit operation. -- v1p8-supply: phandle to the regulator for the 1.8V supply -- v3p3-supply: phandle to the regulator for the 3.3V supply - -- resets: A list of phandle + reset-specifier pairs for the - resets listed in reset-names -- reset-names: Should contain the following: - "phy" USB PHY controller reset - "link" USB LINK controller reset - -- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of - 1 - PHY control - 2 - PMIC control - -Optional properties: -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - -- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual - SPDT USB Switch, witch is controlled by GPIO to de/multiplex - D+/D- USB lines between connectors. - -- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device - Mode Eye Diagram test. Start address at which these values will be - written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as - "do not overwrite default value at this address". - For example: qcom,phy-init-sequence = < -1 0x63 >; - Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1. - -- qcom,phy-num: Select number of pyco-phy to use, can be one of - 0 - PHY one, default - 1 - Second PHY - Some platforms may have configuration to allow USB - controller work with any of the two HSPHYs present. - -- qcom,vdd-levels: This property must be a list of three integer values - (no, min, max) where each value represents either a voltage - in microvolts or a value corresponding to voltage corner. - -- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy - and controller driver therefore enables pull-up explicitly - before starting controller using usbcmd run/stop bit. - -- extcon: phandles to external connector devices. First phandle - should point to external connector, which provide "USB" - cable events, the second should point to external connector - device, which provide "USB-HOST" cable events. If one of - the external connector devices is not required empty <0> - phandle should be specified. - -Example HSUSB OTG controller device node: - - usb@f9a55000 { - compatible = "qcom,usb-otg-snps"; - reg = <0xf9a55000 0x400>; - interrupts = <0 134 0>; - dr_mode = "peripheral"; - - clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, - <&gcc GCC_USB_HS_AHB_CLK>; - - clock-names = "phy", "core", "iface"; - - vddcx-supply = <&pm8841_s2_corner>; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; - reset-names = "phy", "link"; - - qcom,otg-control = <1>; - qcom,phy-init-sequence = < -1 0x63 >; - qcom,vdd-levels = <1 5 7>; - }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index aef42dacc202..18758efb8d29 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -52,6 +52,7 @@ properties: - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 - qcom,x1e80100-dwc3 + - qcom,x1e80100-dwc3-mp - const: qcom,dwc3 reg: @@ -289,6 +290,7 @@ allOf: - qcom,sc8280xp-dwc3 - qcom,sc8280xp-dwc3-mp - qcom,x1e80100-dwc3 + - qcom,x1e80100-dwc3-mp then: properties: clocks: @@ -428,6 +430,21 @@ allOf: contains: enum: - qcom,ipq5332-dwc3 + then: + properties: + interrupts: + maxItems: 3 + interrupt-names: + items: + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + + - if: + properties: + compatible: + contains: + enum: - qcom,x1e80100-dwc3 then: properties: @@ -486,6 +503,7 @@ allOf: contains: enum: - qcom,sc8180x-dwc3-mp + - qcom,x1e80100-dwc3-mp then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 95ff9791baea..653a89586f4e 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -13,10 +13,9 @@ properties: compatible: oneOf: - const: ti,j721e-usb - - const: ti,am64-usb - items: - - const: ti,j721e-usb - const: ti,am64-usb + - const: ti,j721e-usb reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 56d180f9c1cc..b320a39de7fe 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -368,6 +368,8 @@ patternProperties: description: Devantech, Ltd. "^dfi,.*": description: DFI Inc. + "^dfrobot,.*": + description: DFRobot Corporation "^dh,.*": description: DH electronics GmbH "^difrnce,.*": @@ -1539,6 +1541,8 @@ patternProperties: description: Turing Machines, Inc. "^tyan,.*": description: Tyan Computer Corporation + "^tyhx,.*": + description: NanjingTianyihexin Electronics Ltd. "^u-blox,.*": description: u-blox "^u-boot,.*": |