2 files changed, 11 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
index 35d4a979bb7b..89a84f8aa621 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -30,6 +30,13 @@ Mandatory properties:
   128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
   pre-fetchable.
 
+Optional properties:
+- clocks: when present, this should contain the peripheral clock (PCLK) and the
+  PCI clock (PCICLK). If these are not present, they are assumed to be
+  hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+- clock-names: when present, this should contain "PCLK" for the peripheral
+  clock and "PCICLK" for the PCI-side clock.
+
 Mandatory subnodes:
 - For "faraday,ftpci100" a node representing the interrupt-controller inside the
   host bridge is mandatory. It has the following mandatory properties:
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index e3d5680875b1..cf92d3ba5a26 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -33,6 +33,10 @@ Optional properties:
 - reset-gpio-active-high: If present then the reset sequence using the GPIO
   specified in the "reset-gpio" property is reversed (H=reset state,
   L=operation state).
+- vpcie-supply: Should specify the regulator in charge of PCIe port power.
+  The regulator will be enabled when initializing the PCIe host and
+  disabled either as part of the init process or when shutting down the
+  host.
 
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries: