diff options
Diffstat (limited to 'Documentation/devicetree')
54 files changed, 2611 insertions, 1090 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 9fda2436c618..e16b5fa55847 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -163,6 +163,7 @@ properties: - azw,gsking-x - azw,gtking - azw,gtking-pro + - hardkernel,odroid-go-ultra - hardkernel,odroid-n2 - hardkernel,odroid-n2-plus - khadas,vim3 diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 217a1d674863..73f272664e83 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -17,6 +17,7 @@ properties: - description: AST2400 based boards items: - enum: + - delta,ahe50dc-bmc - facebook,galaxy100-bmc - facebook,wedge100-bmc - facebook,wedge40-bmc @@ -82,7 +83,7 @@ properties: - ibm,tacoma-bmc - inventec,transformer-bmc - jabil,rbp-bmc - - nuvia,dc-scm-bmc + - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - const: aspeed,ast2600 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 958df32b4899..52b575c40599 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -66,6 +66,7 @@ properties: - enum: - asus,rt-ac88u - dlink,dir-885l + - dlink,dir-890l - linksys,panamera - luxul,abr-4500-v1 - luxul,xap-1610-v1 @@ -97,6 +98,7 @@ properties: - description: BCM53016 based boards items: - enum: + - dlink,dwl-8610ap - meraki,mr32 - const: brcm,bcm53016 - const: brcm,bcm4708 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 5c13b73e4d57..b2058345bb8e 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -183,6 +183,7 @@ properties: - qcom,kryo485 - qcom,kryo560 - qcom,kryo570 + - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index fbfc4f99c01e..0a5c4e29067a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -520,6 +520,7 @@ properties: items: - enum: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board + - kobo,aura2 - kobo,tolino-shine2hd - kobo,tolino-shine3 - kobo,tolino-vision5 @@ -814,6 +815,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - cloos,imx8mm-phg # i.MX8MM Cloos PHG Board - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board @@ -825,6 +827,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - innocomm,wb15-evk # i.MX8MM Innocomm EVK board with WB15 SoM - kontron,imx8mm-sl # i.MX8MM Kontron SL (N801X) SOM - kontron,imx8mm-osm-s # i.MX8MM Kontron OSM-S (N802X) SOM - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index d76ce4c3819d..2275e5d93721 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -58,6 +58,7 @@ properties: - items: - enum: - mediatek,mt6795-evb + - sony,xperia-m5 - const: mediatek,mt6795 - items: - enum: @@ -83,6 +84,7 @@ properties: - const: mediatek,mt7629 - items: - enum: + - bananapi,bpi-r3 - mediatek,mt7986a-rfb - const: mediatek,mt7986a - items: diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml new file mode 100644 index 000000000000..e333ec4a9c5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC compatibles naming convention + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + qcom,SoC-IP + + For example:: + qcom,sdm845-llcc-bwmon + + When adding new compatibles to existing bindings, use the format in the + existing binding, even if it contradicts the above. + +select: + properties: + compatible: + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + required: + - compatible + +properties: + compatible: + oneOf: + # Preferred naming style for compatibles of SoC components: + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$" + - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" + + # Legacy namings - variations of existing patterns/compatibles are OK, + # but do not add completely new entries to these: + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - enum: + - qcom,dsi-ctrl-6g-qcm2290 + - qcom,gpucc-sdm630 + - qcom,gpucc-sdm660 + - qcom,lcc-apq8064 + - qcom,lcc-ipq8064 + - qcom,lcc-mdm9615 + - qcom,lcc-msm8960 + - qcom,lpass-cpu-apq8016 + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + - qcom,vqmmc-ipq4019-regulator + + # Legacy compatibles with wild-cards - list cannot grow with new bindings: + - enum: + - qcom,ipq806x-gmac + - qcom,ipq806x-nand + - qcom,ipq806x-sata-phy + - qcom,ipq806x-usb-phy-ss + - qcom,ipq806x-usb-phy-hs + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 1b5ac6b02bc5..5facc588f7a6 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -54,6 +54,8 @@ description: | sdm845 sdx55 sdx65 + sm4250 + sm6115 sm6125 sm6350 sm7225 @@ -221,13 +223,20 @@ properties: - items: - enum: + - oneplus,oneplus3 + - oneplus,oneplus3t - qcom,msm8996-mtp - sony,dora-row - sony,kagura-row - sony,keyaki-row - xiaomi,gemini + - const: qcom,msm8996 + + - items: + - enum: - xiaomi,natrium - xiaomi,scorpio + - const: qcom,msm8996pro - const: qcom,msm8996 - items: @@ -463,6 +472,17 @@ properties: - const: google,pazquel-sku2 - const: qcom,sc7180 + - description: Google Pazquel360 with LTE (newest rev) + items: + - const: google,pazquel-sku22 + - const: google,pazquel-sku20 + - const: qcom,sc7180 + + - description: Google Pazquel360 with WiFi (newest rev) + items: + - const: google,pazquel-sku21 + - const: qcom,sc7180 + - description: Sharp Dynabook Chromebook C1 (rev1) items: - const: google,pompom-rev1 @@ -674,6 +694,9 @@ properties: - items: - enum: + - google,cheza + - google,cheza-rev1 + - google,cheza-rev2 - lenovo,yoga-c630 - lg,judyln - lg,judyp @@ -681,17 +704,24 @@ properties: - oneplus,fajita - qcom,sdm845-mtp - shift,axolotl + - samsung,starqltechn - samsung,w737 - sony,akari-row - sony,akatsuki-row - sony,apollo-row - thundercomm,db845c - xiaomi,beryllium + - xiaomi,beryllium-ebbg - xiaomi,polaris - const: qcom,sdm845 - items: - enum: + - oneplus,billie2 + - const: qcom,sm4250 + + - items: + - enum: - sony,pdx201 - const: qcom,sm6125 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c6c69a4e3777..88ff4422a8c1 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -30,11 +30,26 @@ properties: - const: amarula,vyasa-rk3288 - const: rockchip,rk3288 + - description: Anbernic RG351M + items: + - const: anbernic,rg351m + - const: rockchip,rk3326 + - description: Anbernic RG353P items: - const: anbernic,rg353p - const: rockchip,rk3566 + - description: Anbernic RG353V + items: + - const: anbernic,rg353v + - const: rockchip,rk3566 + + - description: Anbernic RG353VS + items: + - const: anbernic,rg353vs + - const: rockchip,rk3566 + - description: Anbernic RG503 items: - const: anbernic,rg503 @@ -468,6 +483,21 @@ properties: - const: hardkernel,rk3326-odroid-go2 - const: rockchip,rk3326 + - description: Hardkernel Odroid Go Advance Black Edition + items: + - const: hardkernel,rk3326-odroid-go2-v11 + - const: rockchip,rk3326 + + - description: Hardkernel Odroid Go Super + items: + - const: hardkernel,rk3326-odroid-go3 + - const: rockchip,rk3326 + + - description: Hardkernel Odroid M1 + items: + - const: rockchip,rk3568-odroid-m1 + - const: rockchip,rk3568 + - description: Hugsun X99 TV Box items: - const: hugsun,x99 @@ -563,7 +593,9 @@ properties: - description: Pine64 SoQuartz SoM items: - enum: + - pine64,soquartz-blade - pine64,soquartz-cm4io + - pine64,soquartz-model-a - const: pine64,soquartz - const: rockchip,rk3566 @@ -709,6 +741,11 @@ properties: - const: rockchip,rv1108-evb - const: rockchip,rv1108 + - description: Theobroma Systems PX30-uQ7 with Haikou baseboard + items: + - const: tsd,px30-ringneck-haikou + - const: rockchip,px30 + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard items: - const: tsd,rk3368-lion-haikou @@ -729,6 +766,11 @@ properties: - const: zkmagic,a95x-z2 - const: rockchip,rk3318 + - description: Rockchip RK3566 BOX Evaluation Demo board + items: + - const: rockchip,rk3566-box-demo + - const: rockchip,rk3566 + - description: Rockchip RK3568 Evaluation board items: - const: rockchip,rk3568-evb1-v10 diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml index 8c0e91658474..c2cea1c90f3c 100644 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -26,6 +26,12 @@ properties: - socionext,uniphier-pro4-ref - socionext,uniphier-pro4-sanji - const: socionext,uniphier-pro4 + - description: Pro5 SoC boards + items: + - enum: + - socionext,uniphier-pro5-epcore + - socionext,uniphier-pro5-proex + - const: socionext,uniphier-pro5 - description: sLD8 SoC boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 4c605bccc474..44f5c5855af8 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -59,6 +59,12 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 + - description: DH STM32MP151 DHCOR SoM based Boards + items: + - const: dh,stm32mp151a-dhcor-testbench + - const: dh,stm32mp151a-dhcor-som + - const: st,stm32mp151 + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 28b8232e1c5b..09e6845ff243 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -61,6 +61,7 @@ properties: - const: ti,j721e - items: - enum: + - beagle,j721e-beagleboneai64 - ti,j721e-evm - ti,j721e-sk - const: ti,j721e diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml new file mode 100644 index 000000000000..bbd22e95b319 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Family Anatop Module + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + NXP i.MX8M Family anatop PLL module which generates PLL to CCM root. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8mm-anatop + - fsl,imx8mq-anatop + - items: + - enum: + - fsl,imx8mn-anatop + - fsl,imx8mp-anatop + - const: fsl,imx8mm-anatop + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop"; + reg = <0x30360000 0x10000>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt index 958e0ad78c52..f7d347385b57 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -136,7 +136,7 @@ clock@70110000 { }; /* pinmux nodes added for completeness. Binding doc can be found in: - * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt + * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml */ pinmux: pinmux@700008d4 { diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml new file mode 100644 index 000000000000..7cc2dd525a96 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra234 NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra234-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: nvdec + - const: fuse + - const: tsec_pka + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: write + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the memory controller for determining information for the NVDEC + firmware secure carveout. This carveout is configured by the bootloader and + not accessible to CPU. + + nvidia,bl-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader code section from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader data section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,os-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system code section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system data section from beginning of firmware that was configured + by the bootloader. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - nvidia,memory-controller + - nvidia,bl-manifest-offset + - nvidia,bl-code-offset + - nvidia,bl-data-offset + - nvidia,os-manifest-offset + - nvidia,os-code-offset + - nvidia,os-data-offset + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra234-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA234_CLK_NVDEC>, + <&bpmp TEGRA234_CLK_FUSE>, + <&bpmp TEGRA234_CLK_TSEC_PKA>; + clock-names = "nvdec", "fuse", "tsec_pka"; + resets = <&bpmp TEGRA234_RESET_NVDEC>; + reset-names = "nvdec"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; + dma-coherent; + + nvidia,memory-controller = <&mc>; + + /* Placeholder values, to be replaced with values from overlay */ + nvidia,bl-manifest-offset = <0>; + nvidia,bl-data-offset = <0>; + nvidia,bl-code-offset = <0>; + nvidia,os-manifest-offset = <0>; + nvidia,os-data-offset = <0>; + nvidia,os-code-offset = <0>; + }; diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index 704033e21ee8..53945c61325c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun6i-a31-ir - items: - enum: + - allwinner,suniv-f1c100s-ir - allwinner,sun8i-a83t-ir - allwinner,sun8i-r40-ir - allwinner,sun50i-a64-ir diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt deleted file mode 100644 index b88dcdd41def..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt +++ /dev/null @@ -1,9 +0,0 @@ -Dongwoon Anatech DW9714 camera voice coil lens driver - -DW9174 is a 10-bit DAC with current sink capability. It is intended -for driving voice coil lenses in camera modules. - -Mandatory properties: - -- compatible: "dongwoon,dw9714" -- reg: I²C slave address diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml new file mode 100644 index 000000000000..66229a3dc05d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9714 camera voice coil lens driver + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + DW9174 is a 10-bit DAC with current sink capability. It is intended for + driving voice coil lenses in camera modules. + +properties: + compatible: + const: dongwoon,dw9714 + + reg: + maxItems: 1 + + powerdown-gpios: + description: + XSD pin for shutdown (active low) + + vcc-supply: + description: VDD power supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 6a3e3ede1ede..a5edab6f2e40 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -33,6 +33,7 @@ properties: compatible: items: - enum: + - qcom,pm6125 - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 64995cbb0f97..41c9760227cd 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Krzysztof Opasiak <k.opasiak@samsung.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml index e374aa7891ae..ec20e33d9b8f 100644 --- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml @@ -11,14 +11,18 @@ maintainers: properties: compatible: - enum: - - fsl,imx6q-snvs-lpgpr - - fsl,imx6ul-snvs-lpgpr - - fsl,imx7d-snvs-lpgpr - - fsl,imx8mm-snvs-lpgpr - - fsl,imx8mn-snvs-lpgpr - - fsl,imx8mp-snvs-lpgpr - - fsl,imx8mq-snvs-lpgpr + oneOf: + - items: + - enum: + - fsl,imx8mm-snvs-lpgpr + - fsl,imx8mn-snvs-lpgpr + - fsl,imx8mp-snvs-lpgpr + - fsl,imx8mq-snvs-lpgpr + - const: fsl,imx7d-snvs-lpgpr + - enum: + - fsl,imx6q-snvs-lpgpr + - fsl,imx6ul-snvs-lpgpr + - fsl,imx7d-snvs-lpgpr required: - compatible diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml index 75da3e8eecb9..fe81d52c7277 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml @@ -27,6 +27,7 @@ properties: - nvidia,tegra234-pcie reg: + minItems: 4 items: - description: controller's application logic registers - description: configuration registers @@ -35,13 +36,16 @@ properties: available for software access. - description: aperture where the Root Port's own configuration registers are available. + - description: aperture to access the configuration space through ECAM. reg-names: + minItems: 4 items: - const: appl - const: config - const: atu_dma - const: dbi + - const: ecam interrupts: items: @@ -202,6 +206,31 @@ properties: allOf: - $ref: /schemas/pci/snps,dw-pcie.yaml# + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-pcie + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra234-pcie + then: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 unevaluatedProperties: false @@ -305,8 +334,9 @@ examples: reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ - <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ - reg-names = "appl", "config", "atu_dma", "dbi"; + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 7287d395e1b6..7e0b015f1414 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -35,7 +35,7 @@ properties: maxItems: 5 items: enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, - parf, cfg, link, ulreg, smu, mpu, apb, phy ] + parf, cfg, link, ulreg, smu, mpu, apb, phy, ecam ] num-lanes: description: | diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml new file mode 100644 index 000000000000..96c608bcb87e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of + the phrase "pin configuration node". + + Tegra's pin configuration nodes act as a container for an arbitrary number + of subnodes. Each of these subnodes represents some desired configuration + for a pin, a group, or a list of pins or groups. This configuration can + include the mux function to select on those pin(s)/ group(s), and various + pin configuration parameters, such as pull-up, tristate, drive strength, + etc. + + The name of each subnode is not important; all subnodes should be + enumerated and processed purely based on their content. + + Each subnode only affects those parameters that are explicitly listed. In + other words, a subnode that lists a mux function but no pin configuration + parameters implies no information about any pin configuration parameters. + + Similarly, a pin subnode that describes a pullup parameter implies no + information about e.g. the mux function or tristate parameter. For this + reason, even seemingly boolean values are actually tristates in this + binding: unspecified, off, or on. Unspecified is represented as an absent + property, and off/on are represented as integer values 0 and 1. + + Note that many of these properties are only valid for certain specific pins + or groups. See the Tegra TRM and various pinmux spreadsheets for complete + details regarding which groups support which functionality. The Linux + pinctrl driver may also be a useful reference, since it consolidates, + disambiguates, and corrects data from all those sources. + +properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: An array of strings. Each string contains the name of a pin + or group. Valid values for these names are listed below. + + nvidia,function: + $ref: /schemas/types.yaml#/definitions/string + description: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below. See the + Tegra TRM to determine which are valid for each pin or group. + + nvidia,pull: + description: Pull-down/up setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: none + const: 0 + - description: down + const: 1 + - description: up + const: 2 + + nvidia,tristate: + description: Tristate setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: drive + const: 0 + - description: tristate + const: 1 + + nvidia,schmitt: + description: Enable Schmitt trigger on the input. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable Schmitt trigger on the input + const: 0 + - description: enable Schmitt trigger on the input + const: 1 + + nvidia,pull-down-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,pull-up-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,high-speed-mode: + description: Enable high speed mode the pins. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal speed mode + const: 0 + - description: high speed mode + const: 1 + + nvidia,low-power-mode: + description: Controls the drive power or current. Valid values are from 0 + through 3, where 0 specifies the least power and 3 specifies the most + power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,enable-input: + description: Enable the pin's input path. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable input (i.e. output only) + const: 0 + - description: enable input + const: 1 + + nvidia,open-drain: + description: Open-drain configuration for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable open-drain + const: 0 + - description: enable open-drain + const: 1 + + nvidia,lock: + description: Lock the pin configuration against further changes until + reset. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable pin configuration lock + const: 0 + - description: enable pin configuration lock + const: 1 + + nvidia,io-reset: + description: reset the I/O path + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + + nvidia,rcv-sel: + description: select VIL/VIH receivers + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal receivers + const: 0 + - description: high-voltage receivers + const: 1 + + nvidia,drive-type: + description: Drive type to configure for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,io-hv: + description: Select high-voltage receivers. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: Use normal receivers. + const: 0 + - description: Use high-voltage receivers. + const: 1 + + nvidia,slew-rate-rising: + description: Controls rising signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,slew-rate-falling: + description: Controls falling signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt deleted file mode 100644 index fb70856c5b51..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt +++ /dev/null @@ -1,131 +0,0 @@ -NVIDIA Tegra114 pinmux controller - -The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: "nvidia,tegra114-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. The first bank of address must be the - driver strength pad control register address and second bank address must - be pinmux register address. - -Tegra114 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high. -- nvidia,drive-type: Integer. Valid range 0...3. - -As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding -which groups support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5, - gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, - clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, - gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3, - gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0, - gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5, - gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0, - pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, - pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, - kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, - kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req, - cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, - dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, - gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4, - gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6, - sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, - sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, - gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5, - sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda. - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, - i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, - pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, - rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, - spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, - usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra114-pinmux"; - reg = <0x70000868 0x148 /* Pad control registers */ - 0x70003000 0x40c>; /* PinMux registers */ - }; - -Example board file extract: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml new file mode 100644 index 000000000000..065dedb3573a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra114-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, + gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, + gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, + gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, + gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3, + gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, + kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, + kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, + kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, + core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, + dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2, + clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, + dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, + usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5, + sdmmc3_clk_lb_out_pee4, reset_out_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, + reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, + sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, + spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb, + vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinmux@70000868 { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148>, /* Pad control registers */ + <0x70003000 0x40c>; /* PinMux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt deleted file mode 100644 index f4d06bb0b55a..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ /dev/null @@ -1,153 +0,0 @@ -NVIDIA Tegra124 pinmux controller - -The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For - Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'. -- reg: Should contain a list of base address and size pairs for: - -- first entry - the drive strength and pad control registers. - -- second entry - the pinmux registers - -- third entry - the MIPI_PAD_CTRL register - -Tegra124 adds the following optional properties for pin configuration subnodes. -The macros for options are defined in the - include/dt-binding/pinctrl/pinctrl-tegra.h. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-reset: Integer. Reset the IO path. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE - -Please refer the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, - gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, - dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, - pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, - pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, - pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, - sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, - sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, - sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, - cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, - pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, - kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, - kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, - clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, - spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, - dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, - gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, - sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, - sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, - pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, - sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, - usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, - gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, - pff2, dp_hpd_pff0, - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. - - MIPI pad control groups: - - These support only the nvidia,function property. - - dsi_b - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, - gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, - i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, - pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, - sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, - uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, - dp, rtck, sys, clk tmds, csi, dsi_b - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra124-pinmux"; - reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x434>, /* Mux registers */ - <0x0 0x70000820 0x0 0x8>; /* MIPI pad control */ - }; - -Example pinmux entries: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml new file mode 100644 index 000000000000..f924652bef0d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra124 pinctrl binding is very similar to the Tegra20 and + Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and + nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a + baseline, and only documents the differences between the two bindings. + +properties: + compatible: + oneOf: + - const: nvidia,tegra124-pinmux + - items: + - const: nvidia,tegra132-pinmux + - const: nvidia,tegra124-pinmux + + reg: + items: + - description: driver strength and pad control registers + - description: pinmux registers + - description: MIPI_PAD_CTRL registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4, + pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0, + ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, + kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, + kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, + kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, + kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, + kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7, + clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, + spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, + dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, + pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6, + hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, + gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, + sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n, + kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2, + dp_hpd_pff0, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv, + drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3, + drive_ao0, drive_hv0, drive_sdio4, drive_ao4, + # MIPI pad control groups + mipi_pad_ctrl_dsi_b ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, + rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, + spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, + pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164>, /* Pad control registers */ + <0x70003000 0x434>, /* Mux registers */ + <0x70000820 0x8>; /* MIPI pad control */ + + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt deleted file mode 100644 index 90d38f710635..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt +++ /dev/null @@ -1,107 +0,0 @@ -NVIDIA Tegra194 pinmux controller - -Required properties: -- compatible: "nvidia,tegra194-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - These correspond to Tegra PADCTL_* (pinmux) registers. - - Mux groups: - - These correspond to Tegra PADCTL_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - - Drive groups: - - These registers controls a single pin for which a mux group exists. - See the list above for the pin name to use when configuring the pinmux. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - -Valid values for nvidia,functions are: - - pe5 - -Power Domain: - pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power - partition. Client devices must enable this partition before accessing - these pins here. - - -Example: - - tegra_pinctrl: pinmux: pinmux@2430000 { - compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000 - 0xc300000 0x4000>; - - pinctrl-names = "pex_rst"; - pinctrl-0 = <&pex_rst_c5_out_state>; - - pex_rst_c5_out_state: pex_rst_c5_out { - pex_rst { - nvidia,pins = "pex_l5_rst_n_pgg1"; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,lpdr = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml new file mode 100644 index 000000000000..60a4bdf01bf2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra194-pinmux + - nvidia,tegra194-pinmux-aon + + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + unevaluatedProperties: false + properties: + nvidia,function: + enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1, + displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp, + dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3, + extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8, + i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi, + nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0, + rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs, + soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc, + uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, wdt ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + description: An array of strings. Each string contains the name + of a pin or group. Valid values for these names are listed + below. + + Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins + are part of PCIE C5 power partition. Client devices must + enable this partition before accessing the configuration for + these pins. + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0, + cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2, + soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5, + soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0, + soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1, + dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5, + soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0, + soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0, + sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3, + sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6, + soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1, + soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4, + soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7, + soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2, + dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5, + soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0, + dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3, + dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6, + dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0, + directdc1_in_pv1, directdc1_out0_pv2, + directdc1_out1_pv3, directdc1_out2_pv4, + directdc1_out3_pv5, directdc1_out4_pv6, + directdc1_out5_pv7, directdc1_out6_pw0, + directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1, + gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5, + uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + ufs0_ref_clk_pff0, ufs0_rst_pff1, + pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1, + directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs, + sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4, + sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0, + sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp, + sdmmc3_hv_trim, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio33_pt0, drive_soc_gpio32_ps7, + drive_soc_gpio31_ps6, drive_soc_gpio30_ps5, + drive_aud_mclk_ps4, drive_dap1_fs_ps3, + drive_dap1_din_ps2, drive_dap1_dout_ps1, + drive_dap1_sclk_ps0, drive_dap3_fs_pt4, + drive_dap3_din_pt3, drive_dap3_dout_pt2, + drive_dap3_sclk_pt1, drive_dap5_fs_pu0, + drive_dap5_din_pt7, drive_dap5_dout_pt6, + drive_dap5_sclk_pt5, drive_dap6_fs_pa3, + drive_dap6_din_pa2, drive_dap6_dout_pa1, + drive_dap6_sclk_pa0, drive_dap4_fs_pa7, + drive_dap4_din_pa6, drive_dap4_dout_pa5, + drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1, + drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3, + drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4, + drive_soc_gpio41_pq5, drive_soc_gpio42_pq6, + drive_soc_gpio43_pq7, drive_soc_gpio44_pr0, + drive_soc_gpio45_pr1, drive_soc_gpio20_pq0, + drive_soc_gpio21_pq1, drive_soc_gpio22_pq2, + drive_soc_gpio23_pq3, drive_soc_gpio04_pp4, + drive_soc_gpio05_pp5, drive_soc_gpio06_pp6, + drive_soc_gpio07_pp7, drive_uart1_cts_pr5, + drive_uart1_rts_pr4, drive_uart1_rx_pr3, + drive_uart1_tx_pr2, drive_dap2_din_pi1, + drive_dap2_dout_pi0, drive_dap2_fs_pi2, + drive_dap2_sclk_ph7, drive_uart4_cts_ph6, + drive_uart4_rts_ph5, drive_uart4_rx_ph4, + drive_uart4_tx_ph3, drive_soc_gpio03_pg3, + drive_soc_gpio02_pg2, drive_soc_gpio01_pg1, + drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3, + drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4, + drive_soc_gpio09_pg5, drive_soc_gpio10_pg6, + drive_soc_gpio11_pg7, drive_soc_gpio12_ph0, + drive_soc_gpio13_ph1, drive_soc_gpio14_ph2, + drive_soc_gpio50_pm5, drive_soc_gpio51_pm6, + drive_soc_gpio52_pm7, drive_soc_gpio53_pn0, + drive_soc_gpio54_pn1, drive_soc_gpio55_pn2, + drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1, + drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3, + drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0, + drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1, + drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5, + drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3, + drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1, + drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0, + drive_spi3_miso_py1, drive_spi1_cs0_pz6, + drive_spi3_cs0_py3, drive_spi1_miso_pz4, + drive_spi3_cs1_py4, drive_gp_pwm3_px3, + drive_gp_pwm2_px2, drive_spi1_sck_pz3, + drive_spi3_sck_py0, drive_spi1_cs1_pz7, + drive_spi1_mosi_pz5, drive_spi3_mosi_py2, + drive_cv_pwr_req_px1, drive_uart2_tx_px4, + drive_uart2_rx_px5, drive_uart2_rts_px6, + drive_uart2_cts_px7, drive_uart5_rx_py6, + drive_uart5_tx_py5, drive_uart5_rts_py7, + drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1, + drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1, + drive_ufs0_ref_clk_pff0 ] + + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux-aon + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2, + can0_din_paa3, can0_stb_paa4, can0_en_paa5, + can0_wake_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + safe_state_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n, + shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in, + # drive groups + drive_shutdown_n, drive_pmu_int_n, + drive_safe_state_pee0, drive_vcomp_alert_pee1, + drive_soc_pwr_req, drive_batt_oc_pee3, + drive_clk_32k_in, drive_power_on_pee4, + drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6, + drive_ao_retention_n_pee2, drive_touch_clk_pcc4, + drive_uart3_rx_pcc6, drive_uart3_tx_pcc5, + drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1, + drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7, + drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0, + drive_spi2_sck_pcc0, drive_spi2_miso_pcc1, + drive_can1_dout_paa0, drive_can1_din_paa1, + drive_can0_dout_paa2, drive_can0_din_paa3, + drive_can0_stb_paa4, drive_can0_en_paa5, + drive_can0_wake_paa6, drive_can0_err_paa7, + drive_can1_stb_pbb0, drive_can1_en_pbb1, + drive_can1_wake_pbb2, drive_can1_err_pbb3 ] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt deleted file mode 100644 index 3c8ce28baad6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ /dev/null @@ -1,143 +0,0 @@ -NVIDIA Tegra20 pinmux controller - -Required properties: -- compatible: "nvidia,tegra20-pinmux" -- reg: Should contain the register physical address and length for each of - the tri-state, mux, pull-up/down, and pad control register sets. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. Valid values for function names are listed below. See the Tegra - TRM to determine which are valid for each pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - 0: no, 1: yes. -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - 0: no, 1: yes. -- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is - most power. Controls the drive power or current. See "Low Power Mode" - or "LPMD1" and "LPMD0" in the Tegra TRM. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Note that many of these properties are only valid for certain specific pins -or groups. See the Tegra TRM and various pinmux spreadsheets for complete -details regarding which groups support which functionality. The Linux pinctrl -driver may also be a useful reference, since it consolidates, disambiguates, -and corrects data from all those sources. - -Valid values for pin and group names are: - - mux groups: - - These all support nvidia,function, nvidia,tristate, and many support - nvidia,pull. - - ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4, - ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7, - gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, - ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13, - ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp, - lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs, - owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, - spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad, - uca, ucb, uda. - - tristate groups: - - These only support nvidia,pull. - - ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0, - ld19_18, ld21_20, ld23_22. - - drive groups: - - With some exceptions, these support nvidia,high-speed-mode, - nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength, - nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling. - - drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2, - drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg, - drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, - drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a, - drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc, - drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, - drive_uda. - -Valid values for nvidia,functions are: - - ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5, - displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int, - hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand, - osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3, - pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, - sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, - spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, - vi, vi_sensor_clk, xio - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra20-pinmux"; - reg = < 0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8 >; /* Pad control registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdio4_default: sdio4_default { - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@c8000600 { - pinctrl-names = "default"; - pinctrl-0 = <&sdio4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml new file mode 100644 index 000000000000..432ea40209a8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-pinmux + + reg: + items: + - description: tri-state registers + - description: mux register + - description: pull-up/down registers + - description: pad control registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, + dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma, + gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx, + irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1, + ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, + ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, + lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck, + lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb, + sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia, + spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, + uad, uca, ucb, uda, + # tristate groups + ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, + lc, ld17_0, ld19_18, ld21_20, ld23_22, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, + drive_cdev2, drive_csus, drive_dap1, drive_dap2, + drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2, + drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, + drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, + drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk, + drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb, + drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ] + + nvidia,function: + enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, + dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, + gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, + mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1, + pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr, + pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2, + sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3, + spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, + vi, vi_sensor_clk, xio ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = <0x70000014 0x10>, /* Tri-state registers */ + <0x70000080 0x20>, /* Mux registers */ + <0x700000a0 0x14>, /* Pull-up/down registers */ + <0x70000868 0xa8>; /* Pad control registers */ + + pinmux { + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt deleted file mode 100644 index 85f211436b8e..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt +++ /dev/null @@ -1,166 +0,0 @@ -NVIDIA Tegra210 pinmux controller - -Required properties: -- compatible: "nvidia,tegra210-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - Mux groups: - - These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL - register. Where that is true, and property that exists in that register - may also be set on the following pin names. - - als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7, - aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1, - button_power_on_px5, button_slide_sw_py0, button_vol_down_px7, - button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1, - cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6, - cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in, - clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, - dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3, - dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4, - dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, - dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, - gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3, - gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, - gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck, - lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2, - lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1, - pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, - pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2, - pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4, - pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, - qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, - sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5, - sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0, - sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, - sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3, - spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7, - spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, - spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, - touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1, - uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0, - uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, - uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, - usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2 - - Drive groups: - - These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control) - registers. Note that where one of these registers controls a single pin - for which a PINMUX_AUX_* exists, see the list above for the pin name to - use when configuring the pinmux. - - pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, - pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4 - -Valid values for nvidia,functions are: - - aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb, - dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi, - i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, - pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, - sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4, - sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4, - vgp5, vgp6, vimclk, vimclk2 - -Example: - - pinmux: pinmux@70000800 { - compatible = "nvidia,tegra210-pinmux"; - reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x1000>; /* Mux registers */ - - pinctrl-names = "boot"; - pinctrl-0 = <&state_boot>; - - state_boot: pinmux { - gen1_i2c_scl_pj1 { - nvidia,pins = "gen1_i2c_scl_pj1", - nvidia,function = "i2c1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml new file mode 100644 index 000000000000..28ae2e6d0cbc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra210-pinmux + + reg: + items: + - description: APB_MISC_GP_*_PADCTRL register (pad control) + - description: PINMUX_AUX_* registers (pinmux) + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, + ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4, + bt_wake_ap_ph5, button_home_py1, button_power_on_px5, + button_slide_sw_py0, button_vol_down_px7, + button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, + cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0, + cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2, + cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5, + clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, + dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, + dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, + dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0, + dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4, + dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, + gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, + gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, + gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2, + gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, + jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, + lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0, + motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6, + pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, + pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, + pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, + pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2, + pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, + qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, + sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, + sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, + sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1, + sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, + sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, + spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, + spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5, + spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0, + spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, + touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, + uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, + uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3, + uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6, + uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, + usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, + wifi_wake_ap_ph2, + # drive groups + drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6, + drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4, + drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1, + drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4, + drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3, + drive_sdmmc4 ] + + nvidia,function: + enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, + displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, + i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b, + i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0, + pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, + sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, + spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd, + usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux: pinmux@70000800 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x700008d4 0x02a8>, /* Pad control registers */ + <0x70003000 0x1000>; /* Mux registers */ + + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt deleted file mode 100644 index 0e6354c11e6d..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ /dev/null @@ -1,144 +0,0 @@ -NVIDIA Tegra30 pinmux controller - -The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding, -as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes -that binding as a baseline, and only documents the differences between the -two bindings. - -Required properties: -- compatible: "nvidia,tegra30-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. - -Tegra30 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. - -As with Tegra20, see the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset. - - clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3, - dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0, - gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, - sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1, - uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, - lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2, - sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7, - lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, - lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3, - lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4, - gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, - gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, - uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2, - gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7, - vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, - vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, - lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0, - dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5, - lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, - ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, - ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, - dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, - vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, - sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0, - pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, - lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, - clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1, - spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6, - spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, - sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, - sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4, - sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, - cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, - cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4, - clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7, - pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, - pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1, - clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr, - pwr_int_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1, - dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg, - gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, - uart3, uda, vi1. - -Valid values for nvidia,functions are: - - blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt, - dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3, - i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand, - nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, - rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1, - spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta, - uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt2, vi_alt3 - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra30-pinmux"; - reg = < 0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0 >; /* Mux registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml new file mode 100644 index 000000000000..c0eda7848767 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra30-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + properties: + phandle: true + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, + dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, + sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2, + lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, + sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, + lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3, + gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6, + gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, + lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, + vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1, + lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6, + lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, + lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, + lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, + gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6, + gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2, + lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, + uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, + gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, + spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, + vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7, + lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, + lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, + dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, + lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7, + ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, + ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, + ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5, + dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, + kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, + kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, + kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5, + kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, + vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, + gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4, + ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0, + lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, + clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, + spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, + spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0, + ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4, + sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, + sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, + lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6, + pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, + sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, + sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, + sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6, + pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0, + pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, + pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, + clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, + core_pwr_req, cpu_pwr_req, owr, pwr_int_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec, + drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3, + drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma, + drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2, + drive_owr, drive_sdio1, drive_sdio2, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_uda, drive_vi1 ] + + nvidia,function: + enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, + cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv, + extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp, + hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, + i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie, + pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3, + rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, + spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, + trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, + vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinctrl@70000000 { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0x0d0>, /* Pad control registers */ + <0x70003000 0x3e0>; /* Mux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 4cc3cc7c50be..66e400f2a3a4 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -25,7 +25,9 @@ properties: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: - - const: allwinner,sun8i-v3s-pwm + - enum: + - allwinner,suniv-f1c100s-pwm + - allwinner,sun8i-v3s-pwm - const: allwinner,sun7i-a20-pwm - items: - const: allwinner,sun50i-a64-pwm diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml index a7fae1772a81..cd8e9a8907f8 100644 --- a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -30,7 +30,9 @@ properties: maxItems: 1 "#pwm-cells": - const: 2 + enum: [2, 3] + description: + The only flag supported by the controller is PWM_POLARITY_INVERTED. microchip,sync-update-mask: description: | diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt deleted file mode 100644 index 74c41e34c3b6..000000000000 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ /dev/null @@ -1,77 +0,0 @@ -Tegra SoC PWFM controller - -Required properties: -- compatible: Must be: - - "nvidia,tegra20-pwm": for Tegra20 - - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30 - - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114 - - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124 - - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132 - - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 - - "nvidia,tegra186-pwm": for Tegra186 - - "nvidia,tegra194-pwm": for Tegra194 -- reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of - the cells format. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - pwm - -Optional properties: -============================ -In some of the interface like PWM based regulator device, it is required -to configure the pins differently in different states, especially in suspend -state of the system. The configuration of pin is provided via the pinctrl -DT node as detailed in the pinctrl DT binding document - Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -The PWM node will have following optional properties. -pinctrl-names: Pin state names. Must be "default" and "sleep". -pinctrl-0: phandle for the default/active state of pin configurations. -pinctrl-1: phandle for the sleep state of pin configurations. - -Example: - - pwm: pwm@7000a000 { - compatible = "nvidia,tegra20-pwm"; - reg = <0x7000a000 0x100>; - #pwm-cells = <2>; - clocks = <&tegra_car 17>; - resets = <&tegra_car 17>; - reset-names = "pwm"; - }; - - -Example with the pin configuration for suspend and resume: -========================================================= -Suppose pin PE7 (On Tegra210) interfaced with the regulator device and -it requires PWM output to be tristated when system enters suspend. -Following will be DT binding to achieve this: - -#include <dt-bindings/pinctrl/pinctrl-tegra.h> - - pinmux@700008d4 { - pwm_active_state: pwm_active_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - - pwm_sleep_state: pwm_sleep_state { - pe7 { - nvidia,pins = "pe7"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - }; - }; - - pwm@7000a000 { - /* Mandatory PWM properties */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pwm_active_state>; - pinctrl-1 = <&pwm_sleep_state>; - }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml new file mode 100644 index 000000000000..739d3155dd32 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra PWFM controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-pwm + - nvidia,tegra186-pwm + + - items: + - enum: + - nvidia,tegra30-pwm + - nvidia,tegra114-pwm + - nvidia,tegra124-pwm + - nvidia,tegra132-pwm + - nvidia,tegra210-pwm + - enum: + - nvidia,tegra20-pwm + + - items: + - const: nvidia,tegra194-pwm + - const: nvidia,tegra186-pwm + + - items: + - const: nvidia,tegra234-pwm + - const: nvidia,tegra194-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: pwm + + "#pwm-cells": + const: 2 + + pinctrl-names: + items: + - const: default + - const: sleep + + pinctrl-0: + description: configuration for the default/active state + + pinctrl-1: + description: configuration for the sleep state + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + +allOf: + - $ref: pwm.yaml + +required: + - compatible + - reg + - clocks + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA20_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 90a7cabf58fe..83ad177a9043 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -28,17 +28,20 @@ properties: oneOf: - items: - enum: - - sifive,rocket0 + - andestech,ax45mp + - canaan,k210 - sifive,bullet0 - sifive,e5 - sifive,e7 - sifive,e71 - - sifive,u74-mc - - sifive,u54 - - sifive,u74 + - sifive,rocket0 - sifive,u5 + - sifive,u54 - sifive,u7 - - canaan,k210 + - sifive,u74 + - sifive,u74-mc + - thead,c906 + - thead,c910 - const: riscv - items: - enum: diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml index 5b36243fd674..5d3fcee52d59 100644 --- a/Documentation/devicetree/bindings/riscv/starfive.yaml +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -19,7 +19,9 @@ properties: compatible: oneOf: - items: - - const: beagle,beaglev-starlight-jh7100-r0 + - enum: + - beagle,beaglev-starlight-jh7100-r0 + - starfive,visionfive-v1 - const: starfive,jh7100 additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml new file mode 100644 index 000000000000..1cac3cb5226c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M System Configuration (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/V2M-alike SYS (System Configuration) controls the overall + configuration of the LSI and supports the following functions, + - Bank address settings for DMAC + - Bank address settings of the units for ICB + - ETHER AxCACHE[1] (C bit) control function + - RAMA initialization control + - MD[7:0] pin monitoring + - LSI version + - PCIe related settings + - WDT stop control + - Temperature sensor (TSU) monitor + +properties: + compatible: + const: renesas,r9a09g011-sys + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sys: system-controller@a3f03000 { + compatible = "renesas,r9a09g011-sys"; + reg = <0xa3f03000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index f51464a08aff..2789022b52eb 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/renesas.yaml# +$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas SH-Mobile, R-Mobile, and R-Car Platform @@ -431,11 +431,12 @@ properties: - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - const: renesas,r9a06g032 - - description: RZ/G2UL (R9A07G043) + - description: RZ/Five and RZ/G2UL (R9A07G043) items: - enum: - renesas,smarc-evk # SMARC EVK - enum: + - renesas,r9a07g043f01 # RZ/Five - renesas,r9a07g043u11 # RZ/G2UL Type-1 - renesas,r9a07g043u12 # RZ/G2UL Type-2 - const: renesas,r9a07g043 diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 50df1a40bbe3..12cb76711000 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,6 +23,9 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: + - const: fsl,imx8mp-ecspi + - const: fsl,imx6ul-ecspi + - items: - enum: - fsl,imx50-ecspi - fsl,imx6q-ecspi @@ -34,7 +37,6 @@ properties: - fsl,imx8mq-ecspi - fsl,imx8mm-ecspi - fsl,imx8mn-ecspi - - fsl,imx8mp-ecspi - const: fsl,imx51-ecspi reg: diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index feb390d50696..d20569b9b763 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -222,8 +222,8 @@ examples: qcom,hw-settle-time = <200>; }; - conn-therm@47 { - reg = <PM8350_ADC7_AMUX_THM4_100K_PU>; + conn-therm@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; }; @@ -247,7 +247,7 @@ examples: conn-therm@1 { reg = <1>; - io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,avg-samples = <2>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index c5f629c5bc61..994818cb6044 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -30,6 +30,7 @@ properties: - allwinner,sun4i-a10-ehci - allwinner,sun50i-a64-ehci - allwinner,sun50i-h6-ehci + - allwinner,sun50i-h616-ehci - allwinner,sun5i-a13-ehci - allwinner,sun6i-a31-ehci - allwinner,sun7i-a20-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index f838f78d6164..4fcbd0add49d 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -20,6 +20,7 @@ properties: - allwinner,sun4i-a10-ohci - allwinner,sun50i-a64-ohci - allwinner,sun50i-h6-ohci + - allwinner,sun50i-h616-ohci - allwinner,sun5i-a13-ohci - allwinner,sun6i-a31-ohci - allwinner,sun7i-a20-ohci diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt deleted file mode 100644 index 5bfcc0b4d6b9..000000000000 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ /dev/null @@ -1,132 +0,0 @@ -NVIDIA Tegra xHCI controller -============================ - -The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by -the Tegra XUSB pad controller. - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb" - - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb" - - Tegra210: "nvidia,tegra210-xusb" - - Tegra186: "nvidia,tegra186-xusb" -- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI - registers and XUSB IPFS registers. -- reg-names: Must contain the following entries: - - "hcd" - - "fpci" - - "ipfs" -- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt. -- clocks: Must contain an entry for each entry in clock-names. - See ../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - xusb_host - - xusb_host_src - - xusb_falcon_src - - xusb_ss - - xusb_ss_src - - xusb_ss_div2 - - xusb_hs_src - - xusb_fs_src - - pll_u_480m - - clk_m - - pll_e -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - xusb_host - - xusb_ss - - xusb_src - Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src. -- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to - configure the USB pads used by the XHCI controller - -For Tegra124 and Tegra132: -- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. -- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. - -For Tegra210 and Tegra186: -- power-domains: A list of PM domain specifiers that reference each power-domain - used by the xHCI controller. This list must comprise of a specifier for the - XUSBA and XUSBC power-domains. See ../power/power_domain.txt and - ../arm/tegra/nvidia,tegra20-pmc.txt for details. -- power-domain-names: A list of names that represent each of the specifiers in - the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which - represent the power-domains XUSBA and XUSBC, respectively. See - ../power/power_domain.txt for details. - -Optional properties: --------------------- -- phys: Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names: Should include an entry for each PHY used by the controller. The - following PHYs are available: - - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, - usb3-3 - - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2 - -Example: --------- - - usb@0,70090000 { - compatible = "nvidia,tegra124-xusb"; - reg = <0x0 0x70090000 0x0 0x8000>, - <0x0 0x70098000 0x0 0x1000>, - <0x0 0x70099000 0x0 0x1000>; - reg-names = "hcd", "fpci", "ipfs"; - - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, - <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_SS>, - <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, - <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, - <&tegra_car TEGRA124_CLK_PLL_U_480M>, - <&tegra_car TEGRA124_CLK_CLK_M>, - <&tegra_car TEGRA124_CLK_PLL_E>; - clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", - "xusb_ss", "xusb_ss_div2", "xusb_ss_src", - "xusb_hs_src", "xusb_fs_src", "pll_u_480m", - "clk_m", "pll_e"; - resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; - reset-names = "xusb_host", "xusb_ss", "xusb_src"; - - nvidia,xusb-padctl = <&padctl>; - - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ - phy-names = "usb2-1", "usb2-2", "usb3-0"; - - avddio-pex-supply = <&vdd_1v05_run>; - dvddio-pex-supply = <&vdd_1v05_run>; - avdd-usb-supply = <&vdd_3v3_lp0>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-pll-erefe-supply = <&avdd_1v05_run>; - avdd-usb-ss-pll-supply = <&vdd_1v05_run>; - hvdd-usb-ss-supply = <&vdd_3v3_lp0>; - hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; - }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml new file mode 100644 index 000000000000..4a6616bf9bab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + # required + compatible: + oneOf: + - description: NVIDIA Tegra124 + const: nvidia,tegra124-xusb + + - description: NVIDIA Tegra132 + items: + - const: nvidia,tegra132-xusb + - const: nvidia,tegra124-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + # optional + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - hsic-1 + - usb3-0 + - usb3-1 + + avddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + dvddio-pex-supply: + description: PCIe/USB3 digital logic power supply. Must supply 1.05 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - resets + - reset-names + - nvidia,xusb-padctl + - phys + - phy-names + - avddio-pex-supply + - dvddio-pex-supply + - avdd-usb-supply + - hvdd-usb-ss-supply + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra124-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", + "xusb_ss", "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", "pll_u_480m", + "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ + <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ + <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ + phy-names = "usb2-1", "usb2-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-usb-ss-pll-supply = <&vdd_1v05_run>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml new file mode 100644 index 000000000000..6f62944fc597 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra186-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + usb@3530000 { + compatible = "nvidia,tegra186-xusb"; + reg = <0x03530000 0x8000>, + <0x03538000 0x1000>; + reg-names = "hcd", "fpci"; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, + <&bpmp TEGRA186_CLK_XUSB_FALCON>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_XUSB_FS>, + <&bpmp TEGRA186_CLK_PLLU>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; + nvidia,xusb-padctl = <&padctl>; + + #address-cells = <1>; + #size-cells = <0>; + + phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>; + phy-names = "usb2-0", "usb2-1", "usb3-0"; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml new file mode 100644 index 000000000000..65ae9ae9b0b7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra194-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + maxItems: 8 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra194-mc.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + usb@3610000 { + compatible = "nvidia,tegra194-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>; + reg-names = "hcd", "fpci"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA194_CLK_XUSB_FALCON>, + <&bpmp TEGRA194_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA194_CLK_XUSB_SS>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_XUSB_FS>, + <&bpmp TEGRA194_CLK_UTMIPLL>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; + phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml new file mode 100644 index 000000000000..da1e1ec0e7c8 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra210-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 9 + + phy-names: + minItems: 1 + maxItems: 9 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra210-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>, + <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_PLL_U_480M>, + <&tegra_car TEGRA210_CLK_CLK_M>, + <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + power-domains = <&pd_xusbhost>, <&pd_xusbss>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0", + "usb3-1"; + dvddio-pex-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + avdd-usb-supply = <&vdd_3v3_sys>; + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>; + hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb955,9ff"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6e323a380294..25c4aa4b381e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -260,6 +260,8 @@ patternProperties: description: Cirrus Logic, Inc. "^cisco,.*": description: Cisco Systems, Inc. + "^cloos,.*": + description: Carl Cloos Schweisstechnik GmbH. "^cloudengines,.*": description: Cloud Engines, Inc. "^cnm,.*": @@ -605,6 +607,8 @@ patternProperties: description: Ingenic Semiconductor "^injoinic,.*": description: Injoinic Technology Corp. + "^innocomm,.*": + description: InnoComm Mobile Technology Corp. "^innolux,.*": description: Innolux Corporation "^inside-secure,.*": |