diff options
Diffstat (limited to 'Documentation/devicetree')
21 files changed, 106 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 0fff40a6330d..520cdd2127cf 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -61,3 +61,32 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q201" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + +Amlogic Meson Firmware registers Interface +------------------------------------------ + +The Meson SoCs have a register bank with status and data shared with the +secure firmware. + +Required properties: + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" + +Properties should indentify components of this register interface : + +Meson GX SoC Information +------------------------ +A firmware register encodes the SoC type, package and revision information on +the Meson GX SoCs. +If present, the following property should be added : + +Optional properties: + - amlogic,has-chip-id: If present, the interface gives the current SoC version. + +Example +------- + +ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; +}; diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt index 0764f9ab63dc..e20eac7a3087 100644 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -1,14 +1,22 @@ * Renesas R-Car SATA Required properties: -- compatible : should contain one of the following: +- compatible : should contain one or more of the following: - "renesas,sata-r8a7779" for R-Car H1 - ("renesas,rcar-sata" is deprecated) - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 - "renesas,sata-r8a7790" for R-Car H2 other than ES1 - "renesas,sata-r8a7791" for R-Car M2-W - "renesas,sata-r8a7793" for R-Car M2-N - "renesas,sata-r8a7795" for R-Car H3 + - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device + - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device + - "renesas,rcar-sata" is deprecated + + When compatible with the generic version nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : address and length of the SATA registers; - interrupts : must consist of one interrupt specifier. - clocks : must contain a reference to the functional clock. @@ -16,7 +24,7 @@ Required properties: Example: sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791"; + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; reg = <0 0xee300000 0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index f69773f4252b..941bb6a6fb13 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -8,7 +8,6 @@ Required properties: Optional properties: - clocks: Reference to the crypto engine clock. -- dma-mask: The address mask limitation. Defaults to 64. Example: @@ -24,6 +23,5 @@ Example: interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_syscon0 1 26>; - dma-mask = <0xff 0xffffffff>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt new file mode 100644 index 000000000000..4540d61824af --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt @@ -0,0 +1,5 @@ +Exportable MPIO interface of Exar UART chips + +Required properties of the device: + - exar,first-pin: first exportable pins (0..15) + - ngpios: number of exportable pins (1..16) diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index d3b6e1a4713a..5aa5926029ee 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -40,7 +40,7 @@ Optional properties: Example for a Mali-T760: gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; reg = <0xffa30000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index aad98442788b..a58c173b7ab9 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -78,7 +78,6 @@ Example: }; dwmmc0@12200000 { - num-slots = <1>; cap-mmc-highspeed; cap-sd-highspeed; broken-cd; diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt index 85de99fcaa2f..c54e577eea07 100644 --- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt @@ -24,6 +24,5 @@ Example: fifo-depth = <0x20>; bus-width = <4>; - num-slots = <1>; disable-wp; }; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 8af1afcb86dc..07242d141773 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -36,7 +36,6 @@ Example: /* Board portion */ dwmmc0@fcd03000 { - num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; pinctrl-names = "default"; @@ -52,7 +51,6 @@ Example: dwmmc_1: dwmmc1@f723e000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; bus-width = <0x4>; disable-wp; cap-sd-highspeed; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 9cb55ca57461..ef3e5f14067a 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -12,12 +12,12 @@ Required Properties: * #address-cells: should be 1. * #size-cells: should be 0. -# Slots: The slot specific information are contained within child-nodes with - each child-node representing a supported slot. There should be atleast one - child node representing a card slot. The name of the child node representing - the slot is recommended to be slot@n where n is the unique number of the slot - connected to the controller. The following are optional properties which - can be included in the slot child node. +# Slots (DEPRECATED): The slot specific information are contained within + child-nodes with each child-node representing a supported slot. There should + be atleast one child node representing a card slot. The name of the child node + representing the slot is recommended to be slot@n where n is the unique number + of the slot connected to the controller. The following are optional properties + which can be included in the slot child node. * reg: specifies the physical slot number. The valid values of this property is 0 to (num-slots -1), where num-slots is the value @@ -63,7 +63,7 @@ Optional properties: clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. (Use the "max-frequency" instead of "clock-freq-min-max".) -* num-slots: specifies the number of slots supported by the controller. +* num-slots (DEPRECATED): specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the value specified by num-slots. If this property is not specified, the value of num-slot property is assumed to be 1. @@ -124,7 +124,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; @@ -139,7 +138,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index eaade0e5adeb..906819a90c2b 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -25,7 +25,6 @@ Example: clock-frequency = <50000000>; clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index 2fefa1a44afd..ad16c1f481f7 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -11,6 +11,7 @@ Required properties: - reg-names: Names of the registers. "amac_base": Address and length of the GMAC registers "idm_base": Address and length of the GMAC IDM registers + (required for NSP and Northstar2) "nicpm_base": Address and length of the NIC Port Manager registers (required for Northstar2) - interrupts: Interrupt number diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt deleted file mode 100644 index 022946caa7e2..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt +++ /dev/null @@ -1,24 +0,0 @@ -Broadcom GMAC Ethernet Controller Device Tree Bindings -------------------------------------------------------------- - -Required properties: - - compatible: "brcm,bgmac-nsp" - - reg: Address and length of the GMAC registers, - Address and length of the GMAC IDM registers - - reg-names: Names of the registers. Must have both "gmac_base" and - "idm_base" - - interrupts: Interrupt number - -Optional properties: -- mac-address: See ethernet.txt file in the same directory - -Examples: - -gmac0: ethernet@18022000 { - compatible = "brcm,bgmac-nsp"; - reg = <0x18022000 0x1000>, - <0x18110000 0x1000>; - reg-names = "gmac_base", "idm_base"; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; -}; diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 194926f77194..1ff02afdc55a 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be one of the following. - "rockchip,rk3066a-efuse" - for RK3066a SoCs. - "rockchip,rk3188-efuse" - for RK3188 SoCs. - - "rockchip,rk322x-efuse" - for RK322x SoCs. + - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index d91715bc8d52..98cc8c09d02d 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt index 07590bcdad15..7c04e22a5d6a 100644 --- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt +++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt @@ -1,13 +1,20 @@ -* Broadcom Digital Timing Engine(DTE) based PTP clock driver +* Broadcom Digital Timing Engine(DTE) based PTP clock Required properties: -- compatible: should be "brcm,ptp-dte" +- compatible: should contain the core compatibility string + and the SoC compatibility string. The SoC + compatibility string is to handle SoC specific + hardware differences. + Core compatibility string: + "brcm,ptp-dte" + SoC compatibility strings: + "brcm,iproc-ptp-dte" - for iproc based SoC's - reg: address and length of the DTE block's NCO registers Example: -ptp_dte: ptp_dte@180af650 { - compatible = "brcm,ptp-dte"; +ptp: ptp-dte@180af650 { + compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte"; reg = <0x180af650 0x10>; status = "okay"; }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index fe5e0f37b3c9..e5a03ffe04fb 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 83ab0f599c40..68a6f487c409 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -6,7 +6,6 @@ System reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-reset" - for sLD3 SoC "socionext,uniphier-ld4-reset" - for LD4 SoC "socionext,uniphier-pro4-reset" - for Pro4 SoC "socionext,uniphier-sld8-reset" - for sLD8 SoC @@ -37,7 +36,6 @@ Media I/O (MIO) reset, SD reset Required properties: - compatible: should be one of the following: - "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC "socionext,uniphier-ld4-mio-reset" - for LD4 SoC "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC @@ -92,3 +90,28 @@ Example: other nodes ... }; + + +Analog signal amplifier reset +----------------------------- + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC + "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC +- #reset-cells: should be 1. + +Example: + + adamv@57920000 { + compatible = "socionext,uniphier-ld11-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + adamv_rst: reset { + compatible = "socionext,uniphier-ld11-adamv-reset"; + #reset-cells = <1>; + }; + + other nodes ... + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index e6b572409cf5..574c3a2c77d5 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,7 +9,6 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. -- fsl,dma-size : Indicate the size of the DMA buffer and its periods Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. @@ -29,5 +28,4 @@ uart1: serial@73fbc000 { interrupts = <31>; uart-has-rtscts; fsl,dte-mode; - fsl,dma-size = <1024 4>; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index b1d165b4d4b3..40056f7990f8 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -12,11 +12,13 @@ power/power_domain.txt. It provides the power domains defined in - include/dt-bindings/power/mt8173-power.h - include/dt-bindings/power/mt6797-power.h - include/dt-bindings/power/mt2701-power.h +- include/dt-bindings/power/mt7622-power.h Required properties: - compatible: Should be one of: - "mediatek,mt2701-scpsys" - "mediatek,mt6797-scpsys" + - "mediatek,mt7622-scpsys" - "mediatek,mt8173-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit @@ -26,6 +28,7 @@ Required properties: enabled before enabling certain power domains. Required clocks for MT2701: "mm", "mfg", "ethif" Required clocks for MT6797: "mm", "mfg", "vdec" + Required clocks for MT7622: "hif_sel" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" Optional properties: diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index 01bfb6745fbd..301d2a9bc1b8 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -7,6 +7,7 @@ Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,rk3288-power-controller" - for RK3288 SoCs. "rockchip,rk3328-power-controller" - for RK3328 SoCs. + "rockchip,rk3366-power-controller" - for RK3366 SoCs. "rockchip,rk3368-power-controller" - for RK3368 SoCs. "rockchip,rk3399-power-controller" - for RK3399 SoCs. - #power-domain-cells: Number of cells in a power-domain specifier. @@ -18,6 +19,7 @@ Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain. + "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain. "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain. - clocks (optional): phandles to clocks which need to be enabled while power domain @@ -93,6 +95,7 @@ power domain to use. The index should use macros in: "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain. + "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain. "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain. diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 8d5665468fe7..f34b3a553d7c 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -9,7 +9,9 @@ Controller Node --------------- Required properties: -- compatible : "allwinner,sun4i-a10-sram-controller" +- compatible : should be: + - "allwinner,sun4i-a10-sram-controller" + - "allwinner,sun50i-a64-sram-controller" - reg : sram controller register offset + length SRAM nodes @@ -22,10 +24,13 @@ Each SRAM will have SRAM sections that are going to be handled by the SRAM controller as subnodes. These sections are represented following once again the representation described in the mmio-sram binding. -The valid sections compatible are: +The valid sections compatible for A10 are: - allwinner,sun4i-a10-sram-a3-a4 - allwinner,sun4i-a10-sram-d +The valid sections compatible for A64 are: + - allwinner,sun50i-a64-sram-c + Devices using SRAM sections --------------------------- |