diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
3 files changed, 113 insertions, 13 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt index aa8bf2ec8905..1c94a57a661e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt @@ -5,6 +5,8 @@ The Marvell ICU (Interrupt Consolidation Unit) controller is responsible for collecting all wired-interrupt sources in the CP and communicating them to the GIC in the AP, the unit translates interrupt requests on input wires to MSG memory mapped transactions to the GIC. +These messages will access a different GIC memory area depending on +their type (NSR, SR, SEI, REI, etc). Required properties: @@ -12,20 +14,23 @@ Required properties: - reg: Should contain ICU registers location and length. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value shall be 3. +Subnodes: Each group of interrupt is declared as a subnode of the ICU, +with their own compatible. + +Required properties for the icu_nsr/icu_sei subnodes: - The 1st cell is the group type of the ICU interrupt. Possible group - types are: +- compatible: Should be one of: + * "marvell,cp110-icu-nsr" + * "marvell,cp110-icu-sr" + * "marvell,cp110-icu-sei" + * "marvell,cp110-icu-rei" - ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure - ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure - ICU_GRP_SEI (0x4) : System error interrupt - ICU_GRP_REI (0x5) : RAM error interrupt +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. - The 2nd cell is the index of the interrupt in the ICU unit. + The 1st cell is the index of the interrupt in the ICU unit. - The 3rd cell is the type of the interrupt. See arm,gic.txt for + The 2nd cell is the type of the interrupt. See arm,gic.txt for details. - interrupt-controller: Identifies the node as an interrupt @@ -35,17 +40,73 @@ Required properties: that allows to trigger interrupts using MSG memory mapped transactions. +Note: each 'interrupts' property referring to any 'icu_xxx' node shall + have a different number within [0:206]. + Example: icu: interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; + + CP110_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; +}; + +node1 { + interrupt-parent = <&icu_nsr>; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; +}; + +node2 { + interrupt-parent = <&icu_sei>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; +}; + +/* Would not work with the above nodes */ +node3 { + interrupt-parent = <&icu_nsr>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; +}; + +The legacy bindings were different in this way: + +- #interrupt-cells: The value was 3. + The 1st cell was the group type of the ICU interrupt. Possible + group types were: + ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure + ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure + ICU_GRP_SEI (0x4) : System error interrupt + ICU_GRP_REI (0x5) : RAM error interrupt + The 2nd cell was the index of the interrupt in the ICU unit. + The 3rd cell was the type of the interrupt. See arm,gic.txt for + details. + +Example: + +icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>; }; -usb3h0: usb3@500000 { +node1 { interrupt-parent = <&icu>; interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt new file mode 100644 index 000000000000..0beafed502f5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt @@ -0,0 +1,36 @@ +Marvell SEI (System Error Interrupt) Controller +----------------------------------------------- + +Marvell SEI (System Error Interrupt) controller is an interrupt +aggregator. It receives interrupts from several sources and aggregates +them to a single interrupt line (an SPI) on the parent interrupt +controller. + +This interrupt controller can handle up to 64 SEIs, a set comes from the +AP and is wired while a second set comes from the CPs by the mean of +MSIs. + +Required properties: + +- compatible: should be one of: + * "marvell,ap806-sei" +- reg: SEI registers location and length. +- interrupts: identifies the parent IRQ that will be triggered. +- #interrupt-cells: number of cells to define an SEI wired interrupt + coming from the AP, should be 1. The cell is the IRQ + number. +- interrupt-controller: identifies the node as an interrupt controller + for AP interrupts. +- msi-controller: identifies the node as an MSI controller for the CPs + interrupts. + +Example: + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index a046ed374d80..8de96a4fb2d5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -2,10 +2,12 @@ DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller Required properties: -- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback. +- compatible: must be "renesas,irqc-<soctype>" or "renesas,intc-ex-<soctype>", + and "renesas,irqc" as fallback. Examples with soctypes are: - "renesas,irqc-r8a73a4" (R-Mobile APE6) - "renesas,irqc-r8a7743" (RZ/G1M) + - "renesas,irqc-r8a7744" (RZ/G1N) - "renesas,irqc-r8a7745" (RZ/G1E) - "renesas,irqc-r8a77470" (RZ/G1C) - "renesas,irqc-r8a7790" (R-Car H2) @@ -19,6 +21,7 @@ Required properties: - "renesas,intc-ex-r8a77965" (R-Car M3-N) - "renesas,intc-ex-r8a77970" (R-Car V3M) - "renesas,intc-ex-r8a77980" (R-Car V3H) + - "renesas,intc-ex-r8a77990" (R-Car E3) - "renesas,intc-ex-r8a77995" (R-Car D3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory |