diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
15 files changed, 1892 insertions, 409 deletions
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml index d91b639ae7ae..a8b34f58f8f4 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml @@ -150,22 +150,6 @@ allOf: - {} - const: pcie_phy - const: pcie_aux - - if: - properties: - compatible: - not: - contains: - enum: - - fsl,imx6sx-pcie - - fsl,imx8mq-pcie - - fsl,imx6sx-pcie-ep - - fsl,imx8mq-pcie-ep - then: - properties: - clocks: - maxItems: 3 - clock-names: - maxItems: 3 - if: properties: @@ -223,6 +207,7 @@ allOf: - fsl,imx6sx-pcie - fsl,imx6q-pcie - fsl,imx6qp-pcie + - fsl,imx95-pcie - fsl,imx6sx-pcie-ep - fsl,imx6q-pcie-ep - fsl,imx6qp-pcie-ep diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml index ee155ed5f181..a06f75df8458 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -22,14 +22,7 @@ properties: - fsl,imx8mm-pcie-ep - fsl,imx8mq-pcie-ep - fsl,imx8mp-pcie-ep - - reg: - minItems: 2 - - reg-names: - items: - - const: dbi - - const: addr_space + - fsl,imx95-pcie-ep clocks: minItems: 3 @@ -66,7 +59,44 @@ allOf: properties: compatible: enum: + - fsl,imx8mm-pcie-ep + - fsl,imx8mq-pcie-ep + - fsl,imx8mp-pcie-ep + then: + properties: + reg: + minItems: 2 + maxItems: 2 + reg-names: + items: + - const: dbi + - const: addr_space + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie-ep + then: + properties: + reg: + minItems: 6 + maxItems: 6 + reg-names: + items: + - const: dbi + - const: atu + - const: dbi2 + - const: app + - const: dma + - const: addr_space + + - if: + properties: + compatible: + enum: - fsl,imx8mq-pcie-ep + - fsl,imx95-pcie-ep then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index 81bbb8728f0f..8b8d77b1154b 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -29,16 +29,7 @@ properties: - fsl,imx8mq-pcie - fsl,imx8mm-pcie - fsl,imx8mp-pcie - - reg: - items: - - description: Data Bus Interface (DBI) registers. - - description: PCIe configuration space region. - - reg-names: - items: - - const: dbi - - const: config + - fsl,imx95-pcie clocks: minItems: 3 @@ -94,6 +85,43 @@ allOf: properties: compatible: enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + reg: + maxItems: 2 + reg-names: + items: + - const: dbi + - const: config + + - if: + properties: + compatible: + enum: + - fsl,imx95-pcie + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi + - const: config + - const: atu + - const: app + + - if: + properties: + compatible: + enum: - fsl,imx6sx-pcie then: properties: @@ -111,6 +139,7 @@ allOf: compatible: enum: - fsl,imx8mq-pcie + - fsl,imx95-pcie then: properties: clocks: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml new file mode 100644 index 000000000000..0d1b23523f62 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI Express Root Complex Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + reg: + minItems: 4 + maxItems: 6 + + reg-names: + minItems: 4 + maxItems: 6 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + iommu-map: + minItems: 1 + maxItems: 16 + + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + dma-coherent: true + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + required-opps: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - reg + - reg-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +anyOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml new file mode 100644 index 000000000000..efde49d1bef8 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8775p PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sa8775p + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 5 + maxItems: 5 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sa8775p"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml new file mode 100644 index 000000000000..634da24ec3ed --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc7280 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 13 + maxItems: 13 + + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: PCIe endpoint power supply + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <1>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + dma-coherent; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&pp3300_ssd>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml new file mode 100644 index 000000000000..baf1813ec0ac --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8180x PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sc8180x + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8180x.h> + #include <dt-bindings/interconnect/qcom,sc8180x.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sc8180x"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml new file mode 100644 index 000000000000..25c9f13ae977 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + +required: + - interconnects + - interconnect-names + +allOf: + - $ref: qcom,pcie-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c20000 { + compatible = "qcom,pcie-sc8280xp"; + reg = <0x0 0x01c20000 0x0 0x3000>, + <0x0 0x3c000000 0x0 0xf1d>, + <0x0 0x3c000f20 0x0 0xa8>, + <0x0 0x3c001000 0x0 0x1000>, + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <2>; + num-lanes = <4>; + + #address-cells = <3>; + #size-cells = <2>; + + assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>; + assigned-clock-rates = <19200000>; + clocks = <&gcc GCC_PCIE_2A_AUX_CLK>, + <&gcc GCC_PCIE_2A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr_4", + "noc_aggr_south_sf"; + + dma-coherent; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + phys = <&pcie2a_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie2a_default>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_2A_GDSC>; + + resets = <&gcc GCC_PCIE_2A_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&vreg_nvme>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml new file mode 100644 index 000000000000..9d569644fda9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8150 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 8 + + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ref # REFERENCE clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@1c00000 { + compatible = "qcom,pcie-sm8150"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ref"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml new file mode 100644 index 000000000000..4d060bce6f9d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8250 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + # Unfortunately the "optional" ref clock is used in the middle of the list + oneOf: + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8250"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml new file mode 100644 index 000000000000..9eb6e457b07f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-sm8350 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 8 + maxItems: 9 + + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1", + "aggre0"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml new file mode 100644 index 000000000000..1496d6993ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP. + +properties: + compatible: + enum: + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 11 + maxItems: 12 + + clock-names: + minItems: 11 + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pci + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + max-link-speed = <2>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + msi-map = <0x0 &gic_its 0x5981 0x1>, + <0x100 &gic_its 0x5980 0x1>; + msi-map-mask = <0xff00>; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml new file mode 100644 index 000000000000..24cb38673581 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + oneOf: + - const: qcom,pcie-sm8550 + - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml new file mode 100644 index 000000000000..1074310a8e7a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm X1E80100 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + const: qcom,pcie-x1e80100 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 7 + + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,x1e80100-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c08000 { + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + + resets = <&gcc GCC_PCIE_4_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index a93ab3b54066..cf9a6910b542 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -28,23 +28,8 @@ properties: - qcom,pcie-ipq8074-gen3 - qcom,pcie-msm8996 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdm845 - qcom,pcie-sdx55 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 - - items: - - enum: - - qcom,pcie-sm8650 - - const: qcom,pcie-sm8550 - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 @@ -106,9 +91,6 @@ properties: vdda_refclk-supply: description: A phandle to the core analog power supply for IC which generates reference clock - vddpe-3v3-supply: - description: A phandle to the PCIe endpoint power supply - phys: maxItems: 1 @@ -123,6 +105,9 @@ properties: description: GPIO controlled connection to PERST# signal maxItems: 1 + required-opps: + maxItems: 1 + wake-gpios: description: GPIO controlled connection to WAKE# signal maxItems: 1 @@ -143,7 +128,6 @@ anyOf: - "#interrupt-cells" - required: - msi-map - - msi-map-mask allOf: - $ref: /schemas/pci/pci-bus.yaml# @@ -217,16 +201,7 @@ allOf: compatible: contains: enum: - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - - qcom,pcie-sc8280xp - qcom,pcie-sdx55 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: properties: reg: @@ -456,65 +431,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc7280 - then: - properties: - clocks: - minItems: 13 - maxItems: 13 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sc8180x - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdm845 then: oneOf: @@ -558,229 +474,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sm8150 - then: - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ref # REFERENCE clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8250 - then: - oneOf: - # Unfortunately the "optional" ref clock is used in the middle of the list - - properties: - clocks: - minItems: 9 - maxItems: 9 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - properties: - clocks: - minItems: 8 - maxItems: 8 - clock-names: - items: - - const: pipe # PIPE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - properties: - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8350 - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie0 - then: - properties: - clocks: - minItems: 12 - maxItems: 12 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre0 # Aggre NoC PCIe0 AXI clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8450-pcie1 - then: - properties: - clocks: - minItems: 11 - maxItems: 11 - clock-names: - items: - - const: pipe # PIPE clock - - const: pipe_mux # PIPE MUX - - const: phy_pipe # PIPE output clock - - const: ref # REFERENCE clock - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: aggre1 # Aggre NoC PCIe1 AXI clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8550 - then: - properties: - clocks: - minItems: 7 - maxItems: 8 - clock-names: - minItems: 7 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr # Aggre NoC PCIe AXI clock - - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock - resets: - minItems: 1 - maxItems: 2 - reset-names: - minItems: 1 - items: - - const: pci # PCIe core reset - - const: link_down # PCIe link down reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sc8280xp - then: - properties: - clocks: - minItems: 8 - maxItems: 9 - clock-names: - minItems: 8 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr_4 # NoC aggregate 4 clock - - const: noc_aggr_south_sf # NoC aggregate South SF clock - - const: cnoc_qx # Configuration NoC QX clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-sdx55 then: properties: @@ -803,43 +496,6 @@ allOf: - const: pci # PCIe core reset - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8775p - then: - properties: - clocks: - minItems: 5 - maxItems: 5 - clock-names: - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - resets: - maxItems: 1 - reset-names: - items: - - const: pci # PCIe core reset - - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sa8540p - - qcom,pcie-sa8775p - - qcom,pcie-sc8280xp - then: - required: - - interconnects - - interconnect-names - - - if: not: properties: compatible: @@ -874,16 +530,7 @@ allOf: contains: enum: - qcom,pcie-msm8996 - - qcom,pcie-sa8775p - - qcom,pcie-sc7280 - - qcom,pcie-sc8180x - qcom,pcie-sdm845 - - qcom,pcie-sm8150 - - qcom,pcie-sm8250 - - qcom,pcie-sm8350 - - qcom,pcie-sm8450-pcie0 - - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: oneOf: - properties: @@ -911,24 +558,6 @@ allOf: compatible: contains: enum: - - qcom,pcie-sc8280xp - then: - properties: - interrupts: - minItems: 4 - maxItems: 4 - interrupt-names: - items: - - const: msi0 - - const: msi1 - - const: msi2 - - const: msi3 - - - if: - properties: - compatible: - contains: - enum: - qcom,pcie-apq8064 - qcom,pcie-apq8084 - qcom,pcie-ipq4019 @@ -938,7 +567,6 @@ allOf: - qcom,pcie-ipq8074 - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 - - qcom,pcie-sa8540p then: properties: interrupts: |