diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
19 files changed, 667 insertions, 301 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 000000000000..7ba167e2e1ea --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + http://www.analog.com/en/products/mems/accelerometers/adxl345.html + http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml new file mode 100644 index 000000000000..a7fafb9bf5c6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl372.html + +properties: + compatible: + enum: + - adi,adxl372 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt deleted file mode 100644 index f9525f6e3d43..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt +++ /dev/null @@ -1,39 +0,0 @@ -Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers - -http://www.analog.com/en/products/mems/accelerometers/adxl345.html -http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html - -Required properties: - - compatible : should be one of - "adi,adxl345" - "adi,adxl375" - - reg : the I2C address or SPI chip select number of the sensor - -Required properties for SPI bus usage: - - spi-max-frequency : set maximum clock frequency, must be 5000000 - - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@2a { - compatible = "adi,adxl345"; - reg = <0x53>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl345"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt deleted file mode 100644 index a289964756a7..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt +++ /dev/null @@ -1,33 +0,0 @@ -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer - -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf - -Required properties: - - compatible : should be "adi,adxl372" - - reg: the I2C address or SPI chip select number for the device - -Required properties for SPI bus usage: - - spi-max-frequency: Max SPI frequency to use - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@53 { - compatible = "adi,adxl372"; - reg = <0x53>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl372"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt deleted file mode 100644 index 416273dce569..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt +++ /dev/null @@ -1,75 +0,0 @@ -Analog Devices AD7124 ADC device driver - -Required properties for the AD7124: - - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" - - reg: SPI chip select number for the device - - spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt - - clocks: phandle to the master clock (mclk) - see: Documentation/devicetree/bindings/clock/clock-bindings.txt - - clock-names: Must be "mclk". - - interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Required properties: - * #address-cells: Must be 1. - * #size-cells: Must be 0. - - Subnode(s) represent the external channels which are connected to the ADC. - Each subnode represents one channel and has the following properties: - Required properties: - * reg: The channel number. It can have up to 4 channels on ad7124-4 - and 8 channels on ad7124-8, numbered from 0 to 15. - * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt - - Optional properties: - * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt - * adi,reference-select: Select the reference source to use when - converting on the the specific channel. Valid values are: - 0: REFIN1(+)/REFIN1(−). - 1: REFIN2(+)/REFIN2(−). - 3: AVDD - If this field is left empty, internal reference is selected. - -Optional properties: - - refin1-supply: refin1 supply can be used as reference for conversion. - - refin2-supply: refin2 supply can be used as reference for conversion. - - avdd-supply: avdd supply can be used as reference for conversion. - -Example: - adc@0 { - compatible = "adi,ad7124-4"; - reg = <0>; - spi-max-frequency = <5000000>; - interrupts = <25 2>; - interrupt-parent = <&gpio>; - refin1-supply = <&adc_vref>; - clocks = <&ad7124_mclk>; - clock-names = "mclk"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - diff-channels = <0 1>; - adi,reference-select = <0>; - }; - - channel@1 { - reg = <1>; - bipolar; - diff-channels = <2 3>; - adi,reference-select = <0>; - }; - - channel@2 { - reg = <2>; - diff-channels = <4 5>; - }; - - channel@3 { - reg = <3>; - diff-channels = <6 7>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml new file mode 100644 index 000000000000..cf494a08b837 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7124 ADC device driver + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Bindings for the Analog Devices AD7124 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf + +properties: + compatible: + enum: + - adi,ad7124-4 + - adi,ad7124-8 + + reg: + description: SPI chip select number for the device + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + description: IRQ line for the ADC + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + refin1-supply: + description: refin1 supply can be used as reference for conversion. + maxItems: 1 + + refin2-supply: + description: refin2 supply can be used as reference for conversion. + maxItems: 1 + + avdd-supply: + description: avdd supply can be used as reference for conversion. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-9]|1[0-5])$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels on ad7124-4 + and 16 channels on ad7124-8, numbered from 0 to 15. + items: + minimum: 0 + maximum: 15 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 3] + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + items: + minimum: 0 + maximum: 15 + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +examples: + - | + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + adi,buffered-positive; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + adi,buffered-positive; + adi,buffered-negative; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt deleted file mode 100644 index 440e52555349..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Analog Devices AD7170/AD7171/AD7780/AD7781 - -Data sheets: - -- AD7170: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf -- AD7171: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf -- AD7780: - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf -- AD7781: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf - -Required properties: - -- compatible: should be one of - * "adi,ad7170" - * "adi,ad7171" - * "adi,ad7780" - * "adi,ad7781" -- reg: spi chip select number for the device -- vref-supply: the regulator supply for the ADC reference voltage - -Optional properties: - -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If - specified, it will be asserted during driver probe. As the - line is active high, it should be marked GPIO_ACTIVE_HIGH. -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for - the ad778x chips. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only - for the ad778x chips. If specified, it will be asserted - during driver probe. As the line is active low, it should be - marked GPIO_ACTIVE_LOW. - -Example: - -adc@0 { - compatible = "adi,ad7780"; - reg = <0>; - vref-supply = <&vdd_supply> - - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml new file mode 100644 index 000000000000..d1109416963c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The ad7780 is a sigma-delta analog to digital converter. This driver provides + reading voltage values and status bits from both the ad778x and ad717x series. + Its interface also allows writing on the FILTER and GAIN GPIO pins on the + ad778x. + + Specifications on the converters can be found at: + AD7170: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf + AD7171: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf + AD7780: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf + AD7781: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +properties: + compatible: + enum: + - adi,ad7170 + - adi,ad7171 + - adi,ad7780 + - adi,ad7781 + + reg: + maxItems: 1 + + avdd-supply: + description: + The regulator supply for the ADC reference voltage. + maxItems: 1 + + powerdown-gpios: + description: + Must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,gain-gpios: + description: + Must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,filter-gpios: + description: + Must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 0df9befdaecc..78c06e05c8e5 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -13,8 +13,10 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt6765-auxadc": For MT6765 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs - reg: Address range of the AUXADC unit. - clocks: Should contain a clock specifier for each entry in clock-names - clock-names: Should contain "main". diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 8346bcb04ad7..93a0bd2efc05 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -38,6 +38,7 @@ Required properties: It's required on stm32h7. - clock-names: Must be "adc" and/or "bus" depending on part used. - interrupt-controller: Identifies the controller node as interrupt-parent +- vdda-supply: Phandle to the vdda input analog voltage. - vref-supply: Phandle to the vref input analog reference voltage. - #interrupt-cells = <1>; - #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt deleted file mode 100644 index 6eee2709b5b6..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Sensirion SPS30 particulate matter sensor - -Required properties: -- compatible: must be "sensirion,sps30" -- reg: the I2C address of the sensor - -Example: - -sps30@69 { - compatible = "sensirion,sps30"; - reg = <0x69>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml new file mode 100644 index 000000000000..50a50a0d7070 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SPS30 particulate matter sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - sensirion,sps30 + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + air-pollution-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml new file mode 100644 index 000000000000..7ec3ec94356b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers + +maintainers: + - Popa Stefan <stefan.popa@analog.com> + +description: | + Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf + +properties: + compatible: + enum: + - adi,adf4371 + - adi,adf4372 + + reg: + maxItems: 1 + + clocks: + description: + Definition of the external clock (see clock/clock-bindings.txt) + maxItems: 1 + + clock-names: + description: + Must be "clkin" + maxItems: 1 + + adi,mute-till-lock-en: + type: boolean + description: + If this property is present, then the supply current to RF8P and RF8N + output stage will shut down until the ADF4371/ADF4372 achieves lock as + measured by the digital lock detect circuitry. + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + frequency@0 { + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt deleted file mode 100644 index b9bbde3e13ed..000000000000 --- a/Documentation/devicetree/bindings/iio/light/isl29018.txt +++ /dev/null @@ -1,27 +0,0 @@ -* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor - -Required properties: - - - compatible: Should be one of - "isil,isl29018" - "isil,isl29023" - "isil,isl29035" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -isl29018@44 { - compatible = "isil,isl29018"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml new file mode 100644 index 000000000000..cbb00be8f359 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/isl29018.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient and infrared light sensing with proximity detection over an i2c + interface. + + https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf + +properties: + compatible: + enum: + - isil,isl29018 + - isil,isl29023 + - isil,isl29035 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt deleted file mode 100644 index 059dffa1829a..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt +++ /dev/null @@ -1,25 +0,0 @@ -* TAOS TSL 2580/2581/2583 ALS sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2580" - "amstaos,tsl2581" - "amstaos,tsl2583" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -tsl2581@29 { - compatible = "amstaos,tsl2581"; - reg = <0x29>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml new file mode 100644 index 000000000000..e86ef64ecf03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2580 + - amstaos,tsl2581 + - amstaos,tsl2583 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt deleted file mode 100644 index 1c5e6f17a1df..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt +++ /dev/null @@ -1,42 +0,0 @@ -* AMS/TAOS ALS and proximity sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2571" - "amstaos,tsl2671" - "amstaos,tmd2671" - "amstaos,tsl2771" - "amstaos,tmd2771" - "amstaos,tsl2572" - "amstaos,tsl2672" - "amstaos,tmd2672" - "amstaos,tsl2772" - "amstaos,tmd2772" - "avago,apds9930" - - reg: the I2C address of the device - -Optional properties: - - - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1> - are the only valid values. - - led-max-microamp - current for the proximity LED. Must be 100000, 50000, - 25000, or 13000. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -tsl2772@39 { - compatible = "amstaos,tsl2772"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - amstaos,proximity-diodes = <0>; - led-max-microamp = <100000>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml new file mode 100644 index 000000000000..ed2c3d5eadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing and proximity detection with an i2c interface. + https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf + +properties: + compatible: + enum: + - amstaos,tsl2571 + - amstaos,tsl2671 + - amstaos,tmd2671 + - amstaos,tsl2771 + - amstaos,tmd2771 + - amstaos,tsl2572 + - amstaos,tsl2672 + - amstaos,tmd2672 + - amstaos,tsl2772 + - amstaos,tmd2772 + - avago,apds9930 + + reg: + maxItems: 1 + + amstaos,proximity-diodes: + description: Proximity diodes to enable + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + interrupts: + maxItems: 1 + + led-max-microamp: + description: Current for the proximity LED + enum: + - 13000 + - 25000 + - 50000 + - 100000 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; + }; + }; +... |