3 files changed, 16 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 4448d063ddf6..464d6bf87605 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -52,7 +52,7 @@ I2C managed mode:
 
 			port@1 { /* external port 1 */
 				reg = <1>;
-				label = "lan1;
+				label = "lan1";
 			};
 
 			port@2 { /* external port 2 */
@@ -89,7 +89,7 @@ MDIO managed mode:
 
 					port@1 { /* external port 1 */
 						reg = <1>;
-						label = "lan1;
+						label = "lan1";
 					};
 
 					port@2 { /* external port 2 */
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 6f55bdd52f8a..f0dc94409107 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -34,6 +34,19 @@ Optional properties:
 - fsl,err006687-workaround-present: If present indicates that the system has
   the hardware workaround for ERR006687 applied and does not need a software
   workaround.
+ -interrupt-names:  names of the interrupts listed in interrupts property in
+  the same order. The defaults if not specified are
+  __Number of interrupts__   __Default__
+	1			"int0"
+	2			"int0", "pps"
+	3			"int0", "int1", "int2"
+	4			"int0", "int1", "int2", "pps"
+  The order may be changed as long as they correspond to the interrupts
+  property. Currently, only i.mx7 uses "int1" and "int2". They correspond to
+  tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts.
+  For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
+  per second interrupt associated with 1588 precision time protocol(PTP).
+
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index c3a7be6615c5..3a28a5d8857d 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,7 @@ Required properties:
 	Valid interrupt names are:
   - "macirq" (combined signal for various interrupt events)
   - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
-  - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state)
+  - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state)
 - phy-mode: See ethernet.txt file in the same directory.
 - snps,reset-gpio 	gpio number for phy reset.
 - snps,reset-active-low boolean flag to indicate if phy reset is active low.