diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
214 files changed, 6673 insertions, 2613 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 63b139f9ae28..6b0dfd5c17ba 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -5,7 +5,7 @@ DT_MK_SCHEMA ?= dt-mk-schema DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u) quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<) - cmd_chk_binding = $(DT_DOC_CHECKER) $< ; \ + cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \ $(DT_EXTRACT_EX) $< > $@ $(obj)/%.example.dts: $(src)/%.yaml FORCE @@ -25,7 +25,7 @@ DT_DOCS = $(shell \ DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)) +extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt deleted file mode 100644 index d00debe2e86f..000000000000 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ /dev/null @@ -1,16 +0,0 @@ -Annapurna Labs Alpine Platform Device Tree Bindings ---------------------------------------------------------------- - -Boards in the Alpine family shall have the following properties: - -* Required root node properties: -compatible: must contain "al,alpine" - -* Example: - -/ { - model = "Annapurna Labs Alpine Dev Board"; - compatible = "al,alpine"; - - ... -} diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml new file mode 100644 index 000000000000..a70dff277e05 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/al,alpine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Annapurna Labs Alpine Platform Device Tree Bindings + +maintainers: + - Tsahee Zidenberg <tsahee@annapurnalabs.com> + - Antoine Tenart <antoine.tenart@bootlin.com> + +properties: + compatible: + items: + - const: al,alpine + model: + items: + - const: "Annapurna Labs Alpine Dev Board" + +... diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index b6e810c2781a..6758ece324b1 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -197,7 +197,7 @@ Required nodes: The description for the board must include: - a "psci" node describing the boot method used for the secondary CPUs. A detailed description of the bindings used for "psci" nodes is present - in the psci.txt file. + in the psci.yaml file. - a "cpus" node describing the available cores and their associated "enable-method"s. For more details see cpus.txt file. @@ -216,7 +216,7 @@ Example: #size-cells = <0>; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -225,7 +225,7 @@ Example: ..... A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; diff --git a/Documentation/devicetree/bindings/arm/axxia.txt b/Documentation/devicetree/bindings/arm/axxia.txt deleted file mode 100644 index 7b4ef9c07696..000000000000 --- a/Documentation/devicetree/bindings/arm/axxia.txt +++ /dev/null @@ -1,12 +0,0 @@ -Axxia AXM55xx device tree bindings - -Boards using the AXM55xx SoC need to have the following properties: - -Required root node property: - - - compatible = "lsi,axm5516" - -Boards: - - LSI AXM5516 Validation board (Amarillo) - compatible = "lsi,axm5516-amarillo", "lsi,axm5516" diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml new file mode 100644 index 000000000000..98780a569f22 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axxia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axxia AXM55xx device tree bindings + +maintainers: + - Anders Berg <anders.berg@lsi.com> + +properties: + compatible: + description: LSI AXM5516 Validation board (Amarillo) + items: + - const: lsi,axm5516-amarillo + - const: lsi,axm5516 + +... diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt index 298291211ea4..f1de3247c1b7 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt @@ -26,8 +26,8 @@ Required properties: processor core is clocked by the internal CPU clock, so it is enabled with CPU clock by default. -- cpu : the CPU phandle the debug module is affined to. When omitted - the module is considered to belong to CPU0. +- cpu : the CPU phandle the debug module is affined to. Do not assume it + to default to CPU0 if omitted. Optional properties: diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 8a88ddebc1a2..fcc3bacfd8bc 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -59,6 +59,11 @@ its hardware characteristcs. * port or ports: see "Graph bindings for Coresight" below. +* Additional required property for Embedded Trace Macrocell (version 3.x and + version 4.x): + * cpu: the cpu phandle this ETM/PTM is affined to. Do not + assume it to default to CPU0 if omitted. + * Additional required properties for System Trace Macrocells (STM): * reg: along with the physical base address and length of the register set as described above, another entry is required to describe the @@ -87,9 +92,6 @@ its hardware characteristcs. * arm,cp14: must be present if the system accesses ETM/PTM management registers via co-processor 14. - * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the - source is considered to belong to CPU0. - * Optional property for TMC: * arm,buffer-size: size of contiguous buffer space for TMC ETR diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt index 96fa46cb133c..380e21c5fc7e 100644 --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt @@ -118,7 +118,7 @@ cpus { }; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -129,7 +129,7 @@ cpus { }; A57_1: cpu@1 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -140,7 +140,7 @@ cpus { }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -151,7 +151,7 @@ cpus { }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -162,7 +162,7 @@ cpus { }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -173,7 +173,7 @@ cpus { }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 591bbd012d63..aa40b074b864 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -39,281 +39,242 @@ description: |+ described below. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - enum: [1, 2] + reg: + maxItems: 1 description: | - Definition depends on ARM architecture version and configuration: + Usage and definition depend on ARM architecture version and + configuration: On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': - type: object - properties: - device_type: - const: cpu - - reg: - maxItems: 1 - description: | - Usage and definition depend on ARM architecture version and - configuration: - - On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. - * If cpus node's #address-cells property is set to 2 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. + * arm/msm/qcom,saw2.txt - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. - * If cpus node's #address-cells property is set to 1 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. + * arm/msm/qcom,kpss-acc.txt - All other bits in the reg cells must be set to 0. + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. - compatible: - items: - - enum: - - arm,arm710t - - arm,arm720t - - arm,arm740t - - arm,arm7ej-s - - arm,arm7tdmi - - arm,arm7tdmi-s - - arm,arm9es - - arm,arm9ej-s - - arm,arm920t - - arm,arm922t - - arm,arm925 - - arm,arm926e-s - - arm,arm926ej-s - - arm,arm940t - - arm,arm946e-s - - arm,arm966e-s - - arm,arm968e-s - - arm,arm9tdmi - - arm,arm1020e - - arm,arm1020t - - arm,arm1022e - - arm,arm1026ej-s - - arm,arm1136j-s - - arm,arm1136jf-s - - arm,arm1156t2-s - - arm,arm1156t2f-s - - arm,arm1176jzf - - arm,arm1176jz-s - - arm,arm1176jzf-s - - arm,arm11mpcore - - arm,armv8 # Only for s/w models - - arm,cortex-a5 - - arm,cortex-a7 - - arm,cortex-a8 - - arm,cortex-a9 - - arm,cortex-a12 - - arm,cortex-a15 - - arm,cortex-a17 - - arm,cortex-a53 - - arm,cortex-a57 - - arm,cortex-a72 - - arm,cortex-a73 - - arm,cortex-m0 - - arm,cortex-m0+ - - arm,cortex-m1 - - arm,cortex-m3 - - arm,cortex-m4 - - arm,cortex-r4 - - arm,cortex-r5 - - arm,cortex-r7 - - brcm,brahma-b15 - - brcm,brahma-b53 - - brcm,vulcan - - cavium,thunder - - cavium,thunder2 - - faraday,fa526 - - intel,sa110 - - intel,sa1100 - - marvell,feroceon - - marvell,mohawk - - marvell,pj4a - - marvell,pj4b - - marvell,sheeva-v5 - - marvell,sheeva-v7 - - nvidia,tegra132-denver - - nvidia,tegra186-denver - - nvidia,tegra194-carmel - - qcom,krait - - qcom,kryo - - qcom,kryo385 - - qcom,scorpion - - enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - - description: - Required for systems that have an "enable-method" - property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: | - List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). - - capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - u32 value representing CPU capacity (see ./cpu-capacity.txt) in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - - qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the SAW* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,saw2.txt - - qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the ACC* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,kpss-acc.txt - - rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the syscon node controlling the cpu core power domains. - - Optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - - required: - - device_type - - reg - - compatible - - dependencies: - cpu-release-addr: [enable-method] - rockchip,pmu: [enable-method] + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. required: - - '#address-cells' - - '#size-cells' + - device_type + - reg + - compatible + +dependencies: + rockchip,pmu: [enable-method] examples: - | diff --git a/Documentation/devicetree/bindings/arm/digicolor.txt b/Documentation/devicetree/bindings/arm/digicolor.txt deleted file mode 100644 index 658553f40b23..000000000000 --- a/Documentation/devicetree/bindings/arm/digicolor.txt +++ /dev/null @@ -1,6 +0,0 @@ -Conexant Digicolor Platforms Device Tree Bindings - -Each device tree must specify which Conexant Digicolor SoC it uses. -Must be the following compatible string: - - cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml new file mode 100644 index 000000000000..d9c80b827e9b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/digicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor Platforms Device Tree Bindings + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755 + +... diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 5d7dbabbb784..f378922906f6 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -133,6 +133,18 @@ RTC bindings based on SCU Message Protocol Required properties: - compatible: should be "fsl,imx8qxp-sc-rtc"; +OCOTP bindings based on SCU Message Protocol +------------------------------------------------------------ +Required properties: +- compatible: Should be "fsl,imx8qxp-scu-ocotp" +- #address-cells: Must be 1. Contains byte index +- #size-cells: Must be 1. Contains byte length + +Optional Child nodes: + +- Data cells of ocotp: + Detailed bindings are described in bindings/nvmem/nvmem.txt + Example (imx8qxp): ------------- aliases { @@ -177,6 +189,16 @@ firmware { ... }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 8>; + }; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 45730ba60af5..326f29b270ad 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -241,9 +241,13 @@ processor idle states, defined as device tree nodes, are listed. - "psci" # On ARM 32-bit systems this property is optional -The nodes describing the idle states (state) can only be defined within the -idle-states node, any other configuration is considered invalid and therefore -must be ignored. +This assumes that the "enable-method" property is set to "psci" in the cpu +node[6] that is responsible for setting up CPU idle management in the OS +implementation. + +The nodes describing the idle states (state) can only be defined +within the idle-states node, any other configuration is considered invalid +and therefore must be ignored. =========================================== 4 - state node @@ -687,7 +691,7 @@ cpus { Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.txt + Documentation/devicetree/bindings/arm/psci.yaml [3] ARM Server Base System Architecture (SBSA) http://infocenter.arm.com/help/index.jsp @@ -697,3 +701,6 @@ cpus { [5] Devicetree Specification https://www.devicetree.org/specifications/ + +[6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.txt diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt index 30cb645c0e54..f5518f26a914 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -9,6 +9,8 @@ Required Properties: - "mediatek,mt7622-sgmiisys", "syscon" - "mediatek,mt7629-sgmiisys", "syscon" - #clock-cells: Must be 1 +- mediatek,physpeed: Should be one of "auto", "1000" or "2500" to match up + the capability of the target PHY. The SGMIISYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt deleted file mode 100644 index 11087edb0658..000000000000 --- a/Documentation/devicetree/bindings/arm/moxart.txt +++ /dev/null @@ -1,12 +0,0 @@ -MOXA ART device tree bindings - -Boards with the MOXA ART SoC shall have the following properties: - -Required root node property: - -compatible = "moxa,moxart"; - -Boards: - -- UC-7112-LX: embedded computer - compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml new file mode 100644 index 000000000000..c068df59fad2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/moxart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART device tree bindings + +maintainers: + - Jonas Jensen <jonas.jensen@gmail.com> + +properties: + compatible: + description: UC-7112-LX embedded computer + items: + - const: moxa,moxart-uc-7112-lx + - const: moxa,moxart + +... diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt deleted file mode 100644 index 56ec8ddc4a3b..000000000000 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt +++ /dev/null @@ -1,8 +0,0 @@ -NXP LPC32xx Platforms Device Tree Bindings ------------------------------------------- - -Boards with the NXP LPC32xx SoC shall have the following properties: - -Required root node property: - -compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml new file mode 100644 index 000000000000..07f39d3eee7e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Platforms Device Tree Bindings + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + oneOf: + - enum: + - nxp,lpc3220 + - nxp,lpc3230 + - nxp,lpc3240 + - items: + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 + +... diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index 4cd5d873fc3a..a43e4c7aba3d 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -41,7 +41,7 @@ Examples: Consumer: ======== See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and -Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt for +Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for further details. An interrupt consumer on an SoC using crossbar will use: diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt deleted file mode 100644 index a2c4f1d52492..000000000000 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Power State Coordination Interface (PSCI) - -Firmware implementing the PSCI functions described in ARM document number -ARM DEN 0022A ("Power State Coordination Interface System Software on ARM -processors") can be used by Linux to initiate various CPU-centric power -operations. - -Issue A of the specification describes functions for CPU suspend, hotplug -and migration of secure software. - -Functions are invoked by trapping to the privilege level of the PSCI -firmware (specified as part of the binding below) and passing arguments -in a manner similar to that specified by AAPCS: - - r0 => 32-bit Function ID / return value - {r1 - r3} => Parameters - -Note that the immediate field of the trapping instruction must be set -to #0. - - -Main node required properties: - - - compatible : should contain at least one of: - - * "arm,psci" : For implementations complying to PSCI versions prior - to 0.2. - For these cases function IDs must be provided. - - * "arm,psci-0.2" : For implementations complying to PSCI 0.2. - Function IDs are not required and should be ignored by - an OS with PSCI 0.2 support, but are permitted to be - present for compatibility with existing software when - "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : For implementations complying to PSCI 1.0. - PSCI 1.0 is backward compatible with PSCI 0.2 with - minor specification updates, as defined in the PSCI - specification[2]. - - - method : The method of calling the PSCI firmware. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in this binding. - - "hvc" : HVC #0, with the register assignments specified - in this binding. - -Main node optional properties: - - - cpu_suspend : Function ID for CPU_SUSPEND operation - - - cpu_off : Function ID for CPU_OFF operation - - - cpu_on : Function ID for CPU_ON operation - - - migrate : Function ID for MIGRATE operation - -Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle -state nodes, as per bindings in [1]) must specify the following properties: - -- arm,psci-suspend-param - Usage: Required for state nodes[1] if the corresponding - idle-states node entry-method property is set - to "psci". - Value type: <u32> - Definition: power_state parameter to pass to the PSCI - suspend call. - -Example: - -Case 1: PSCI v0.1 only. - - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x95c10000>; - cpu_off = <0x95c10001>; - cpu_on = <0x95c10002>; - migrate = <0x95c10003>; - }; - -Case 2: PSCI v0.2 only - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - -Case 3: PSCI v0.2 and PSCI v0.1. - - A DTB may provide IDs for use by kernels without PSCI 0.2 support, - enabling firmware and hypervisors to support existing and new kernels. - These IDs will be ignored by kernels with PSCI 0.2 support, which will - use the standard PSCI 0.2 IDs exclusively. - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "hvc"; - - cpu_on = < arbitrary value >; - cpu_off = < arbitrary value >; - - ... - }; - -[1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[2] Power State Coordination Interface (PSCI) specification - http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml new file mode 100644 index 000000000000..7abdf58b335e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + const: arm,psci-0.2 + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + const: arm,psci-1.0 + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + + method: + description: The method of calling the PSCI firmware. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - enum: + # SMC #0, with the register assignments specified in this binding. + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt + + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f6316ab66385..54ef6b6b9189 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -102,6 +102,15 @@ properties: - const: qcom,msm8960 - items: + - enum: + - fairphone,fp2 + - lge,hammerhead + - sony,xperia-amami + - sony,xperia-castor + - sony,xperia-honami + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp - const: qcom,msm8916 @@ -110,6 +119,11 @@ properties: - const: qcom,msm8996-mtp - items: + - enum: + - qcom,ipq4019-ap-dk04.1-c3 + - qcom,ipq4019-ap-dk07.1-c1 + - qcom,ipq4019-ap-dk07.1-c2 + - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 - items: diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt deleted file mode 100644 index 43c80762c428..000000000000 --- a/Documentation/devicetree/bindings/arm/rda.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro platforms device tree bindings ----------------------------------------- - -RDA8810PL SoC -============= - -Required root node properties: - - - compatible : must contain "rda,8810pl" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" - - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml new file mode 100644 index 000000000000..51cec2b63b04 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro platforms device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - xunlong,orangepi-2g-iot # Orange Pi 2G-IoT + - xunlong,orangepi-i96 # Orange Pi i96 + - const: rda,8810pl + +... diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt index 15b48e20a061..a86c83bf9d4e 100644 --- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt @@ -35,7 +35,7 @@ board device tree, including the system base clock, as selected by XOM[0] pin of the SoC. Refer to generic fixed rate clock bindings documentation[1] for more information how to specify these clocks. -[1] Documentation/devicetree/bindings/clock/fixed-clock.txt +[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml Example: Clock controller node: diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index a3448bfa1c82..98a28130e100 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -5,30 +5,29 @@ Endianness ---------- The Devicetree Specification does not define any properties related to hardware -byteswapping, but endianness issues show up frequently in porting Linux to +byte swapping, but endianness issues show up frequently in porting drivers to different machine types. This document attempts to provide a consistent -way of handling byteswapping across drivers. +way of handling byte swapping across drivers. Optional properties: - big-endian: Boolean; force big endian register accesses unconditionally (e.g. ioread32be/iowrite32be). Use this if you - know the peripheral always needs to be accessed in BE mode. + know the peripheral always needs to be accessed in big endian (BE) mode. - little-endian: Boolean; force little endian register accesses unconditionally (e.g. readl/writel). Use this if you know the - peripheral always needs to be accessed in LE mode. + peripheral always needs to be accessed in little endian (LE) mode. - native-endian: Boolean; always use register accesses matched to the endianness of the kernel binary (e.g. LE vmlinux -> readl/writel, - BE vmlinux -> ioread32be/iowrite32be). In this case no byteswaps + BE vmlinux -> ioread32be/iowrite32be). In this case no byte swaps will ever be performed. Use this if the hardware "self-adjusts" register endianness based on the CPU's configured endianness. If a binding supports these properties, then the binding should also specify the default behavior if none of these properties are present. In such cases, little-endian is the preferred default, but it is not -a requirement. The of_device_is_big_endian() and of_fdt_is_big_endian() -helper functions do assume that little-endian is the default, because -most existing (PCI-based) drivers implicitly default to LE by using -readl/writel for MMIO accesses. +a requirement. Some implementations assume that little-endian is +the default, because most existing (PCI-based) drivers implicitly +default to LE for their MMIO accesses. Examples: Scenario 1 : CPU in LE mode & device in LE mode. diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt new file mode 100644 index 000000000000..87bff5add3f9 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt @@ -0,0 +1,37 @@ +i.MX CPUFreq-DT OPP bindings +================================ + +Certain i.MX SoCs support different OPPs depending on the "market segment" and +"speed grading" value which are written in fuses. These bits are combined with +the opp-supported-hw values for each OPP to check if the OPP is allowed. + +Required properties: +-------------------- + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitmaps indicating: + - Supported speed grade mask + - Supported market segment mask + 0: Consumer + 1: Extended Consumer + 2: Industrial + 3: Automotive + +Example: +-------- + +opp_table { + compatible = "operating-points-v2"; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + /* grade >= 0, consumer only */ + opp-supported-hw = <0xf>, <0x3>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000>; + /* grade >= 1, all segments */ + opp-supported-hw = <0xe>, <0x7>; + }; +} diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt index 6b458bb2440d..f2aab3dc2b52 100644 --- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -66,16 +66,3 @@ sha@f8034000 { dmas = <&dma1 2 17>; dma-names = "tx"; }; - -* Eliptic Curve Cryptography (I2C) - -Required properties: -- compatible : must be "atmel,atecc508a". -- reg: I2C bus address of the device. -- clock-frequency: must be present in the i2c controller node. - -Example: -atecc508a@c0 { - compatible = "atmel,atecc508a"; - reg = <0xC0>; -}; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index b052d76cf8b6..678776b6012a 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -126,6 +126,28 @@ required: # but usually they will be filled by the bootloader. - compatible +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,simple-framebuffer + + then: + required: + - allwinner,pipeline + + - if: + properties: + compatible: + contains: + const: amlogic,simple-framebuffer + + then: + required: + - amlogic,pipeline + + additionalProperties: false examples: @@ -139,7 +161,8 @@ examples: #size-cells = <1>; stdout-path = "display0"; framebuffer0: framebuffer@1d385000 { - compatible = "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; reg = <0x1d385000 3840000>; width = <1600>; height = <1200>; diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt new file mode 100644 index 000000000000..d592c21245f2 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt @@ -0,0 +1,19 @@ +FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH + +The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully +controlled using I2C and enables USB data, stereo and mono audio, video, +microphone, and UART data to use a common connector port. + +Required properties: + - compatible : Must be "fcs,fsa9480" + - reg : Specifies i2c slave address. Must be 0x25. + - interrupts : Should contain one entry specifying interrupt signal of + interrupt parent to which interrupt pin of the chip is connected. + + Example: + musb@25 { + compatible = "fcs,fsa9480"; + reg = <0x25>; + interrupt-parent = <&gph2>; + interrupts = <7 0>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt index 553b92a7e87b..bc6b4b62df83 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -5,6 +5,7 @@ Required Properties: "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L, 66AK2E SoCs "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G + "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654 - reg: Physical base address of the controller and the size of memory mapped registers. @@ -145,3 +146,20 @@ gpio0: gpio@260bf00 { ti,ngpio = <32>; ti,davinci-gpio-unbanked = <32>; }; + +Example for K3 AM654: + +wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <59 128>, <59 129>, <59 130>, <59 131>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; +}; diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.txt b/Documentation/devicetree/bindings/gpio/pl061-gpio.txt deleted file mode 100644 index 89058d375b7c..000000000000 --- a/Documentation/devicetree/bindings/gpio/pl061-gpio.txt +++ /dev/null @@ -1,10 +0,0 @@ -ARM PL061 GPIO controller - -Required properties: -- compatible : "arm,pl061", "arm,primecell" -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt mapping for GPIO IRQ. -- gpio-ranges : Interaction with the PINCTRL subsystem. diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml new file mode 100644 index 000000000000..313b17229247 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/pl061-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL061 GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Rob Herring <robh@kernel.org> + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl061 + required: + - compatible + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + items: + - const: arm,pl061 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + oneOf: + - maxItems: 1 + - maxItems: 8 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + clock-names: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - clocks + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt index 69da2115abdc..1cf6182f888c 100644 --- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt @@ -38,6 +38,6 @@ Example: nunchuk: nunchuk@52 { compatible = "nintendo,nunchuk"; - reg = <0x52 0x80000010 0>; + reg = <0x52 0x0 0x10>; }; }; diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt index ab729a0a86ae..4ffe059f0fec 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.txt +++ b/Documentation/devicetree/bindings/i3c/i3c.txt @@ -39,7 +39,9 @@ valid here, but several new properties have been added. New constraint on existing properties: -------------------------------------- - reg: contains 3 cells - + first cell : still encoding the I2C address + + first cell : still encoding the I2C address. 10 bit addressing is not + supported. Devices with 10 bit address can't be properly passed through + DEFSLVS command. + second cell: shall be 0 diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 000000000000..7ba167e2e1ea --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + http://www.analog.com/en/products/mems/accelerometers/adxl345.html + http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml new file mode 100644 index 000000000000..a7fafb9bf5c6 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl372.html + +properties: + compatible: + enum: + - adi,adxl372 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt deleted file mode 100644 index f9525f6e3d43..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt +++ /dev/null @@ -1,39 +0,0 @@ -Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers - -http://www.analog.com/en/products/mems/accelerometers/adxl345.html -http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html - -Required properties: - - compatible : should be one of - "adi,adxl345" - "adi,adxl375" - - reg : the I2C address or SPI chip select number of the sensor - -Required properties for SPI bus usage: - - spi-max-frequency : set maximum clock frequency, must be 5000000 - - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@2a { - compatible = "adi,adxl345"; - reg = <0x53>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl345"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt deleted file mode 100644 index a289964756a7..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt +++ /dev/null @@ -1,33 +0,0 @@ -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer - -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf - -Required properties: - - compatible : should be "adi,adxl372" - - reg: the I2C address or SPI chip select number for the device - -Required properties for SPI bus usage: - - spi-max-frequency: Max SPI frequency to use - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@53 { - compatible = "adi,adxl372"; - reg = <0x53>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl372"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt deleted file mode 100644 index 416273dce569..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt +++ /dev/null @@ -1,75 +0,0 @@ -Analog Devices AD7124 ADC device driver - -Required properties for the AD7124: - - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" - - reg: SPI chip select number for the device - - spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt - - clocks: phandle to the master clock (mclk) - see: Documentation/devicetree/bindings/clock/clock-bindings.txt - - clock-names: Must be "mclk". - - interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Required properties: - * #address-cells: Must be 1. - * #size-cells: Must be 0. - - Subnode(s) represent the external channels which are connected to the ADC. - Each subnode represents one channel and has the following properties: - Required properties: - * reg: The channel number. It can have up to 4 channels on ad7124-4 - and 8 channels on ad7124-8, numbered from 0 to 15. - * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt - - Optional properties: - * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt - * adi,reference-select: Select the reference source to use when - converting on the the specific channel. Valid values are: - 0: REFIN1(+)/REFIN1(−). - 1: REFIN2(+)/REFIN2(−). - 3: AVDD - If this field is left empty, internal reference is selected. - -Optional properties: - - refin1-supply: refin1 supply can be used as reference for conversion. - - refin2-supply: refin2 supply can be used as reference for conversion. - - avdd-supply: avdd supply can be used as reference for conversion. - -Example: - adc@0 { - compatible = "adi,ad7124-4"; - reg = <0>; - spi-max-frequency = <5000000>; - interrupts = <25 2>; - interrupt-parent = <&gpio>; - refin1-supply = <&adc_vref>; - clocks = <&ad7124_mclk>; - clock-names = "mclk"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - diff-channels = <0 1>; - adi,reference-select = <0>; - }; - - channel@1 { - reg = <1>; - bipolar; - diff-channels = <2 3>; - adi,reference-select = <0>; - }; - - channel@2 { - reg = <2>; - diff-channels = <4 5>; - }; - - channel@3 { - reg = <3>; - diff-channels = <6 7>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml new file mode 100644 index 000000000000..cf494a08b837 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7124 ADC device driver + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Bindings for the Analog Devices AD7124 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf + +properties: + compatible: + enum: + - adi,ad7124-4 + - adi,ad7124-8 + + reg: + description: SPI chip select number for the device + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + description: IRQ line for the ADC + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + refin1-supply: + description: refin1 supply can be used as reference for conversion. + maxItems: 1 + + refin2-supply: + description: refin2 supply can be used as reference for conversion. + maxItems: 1 + + avdd-supply: + description: avdd supply can be used as reference for conversion. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-9]|1[0-5])$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels on ad7124-4 + and 16 channels on ad7124-8, numbered from 0 to 15. + items: + minimum: 0 + maximum: 15 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 3] + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + items: + minimum: 0 + maximum: 15 + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +examples: + - | + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + adi,buffered-positive; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + adi,buffered-positive; + adi,buffered-negative; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt deleted file mode 100644 index 440e52555349..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Analog Devices AD7170/AD7171/AD7780/AD7781 - -Data sheets: - -- AD7170: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf -- AD7171: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf -- AD7780: - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf -- AD7781: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf - -Required properties: - -- compatible: should be one of - * "adi,ad7170" - * "adi,ad7171" - * "adi,ad7780" - * "adi,ad7781" -- reg: spi chip select number for the device -- vref-supply: the regulator supply for the ADC reference voltage - -Optional properties: - -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If - specified, it will be asserted during driver probe. As the - line is active high, it should be marked GPIO_ACTIVE_HIGH. -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for - the ad778x chips. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only - for the ad778x chips. If specified, it will be asserted - during driver probe. As the line is active low, it should be - marked GPIO_ACTIVE_LOW. - -Example: - -adc@0 { - compatible = "adi,ad7780"; - reg = <0>; - vref-supply = <&vdd_supply> - - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml new file mode 100644 index 000000000000..d1109416963c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The ad7780 is a sigma-delta analog to digital converter. This driver provides + reading voltage values and status bits from both the ad778x and ad717x series. + Its interface also allows writing on the FILTER and GAIN GPIO pins on the + ad778x. + + Specifications on the converters can be found at: + AD7170: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf + AD7171: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf + AD7780: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf + AD7781: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +properties: + compatible: + enum: + - adi,ad7170 + - adi,ad7171 + - adi,ad7780 + - adi,ad7781 + + reg: + maxItems: 1 + + avdd-supply: + description: + The regulator supply for the ADC reference voltage. + maxItems: 1 + + powerdown-gpios: + description: + Must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,gain-gpios: + description: + Must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,filter-gpios: + description: + Must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 0df9befdaecc..78c06e05c8e5 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -13,8 +13,10 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt6765-auxadc": For MT6765 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs - reg: Address range of the AUXADC unit. - clocks: Should contain a clock specifier for each entry in clock-names - clock-names: Should contain "main". diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 8346bcb04ad7..93a0bd2efc05 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -38,6 +38,7 @@ Required properties: It's required on stm32h7. - clock-names: Must be "adc" and/or "bus" depending on part used. - interrupt-controller: Identifies the controller node as interrupt-parent +- vdda-supply: Phandle to the vdda input analog voltage. - vref-supply: Phandle to the vref input analog reference voltage. - #interrupt-cells = <1>; - #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt deleted file mode 100644 index 6eee2709b5b6..000000000000 --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Sensirion SPS30 particulate matter sensor - -Required properties: -- compatible: must be "sensirion,sps30" -- reg: the I2C address of the sensor - -Example: - -sps30@69 { - compatible = "sensirion,sps30"; - reg = <0x69>; -}; diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml new file mode 100644 index 000000000000..50a50a0d7070 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SPS30 particulate matter sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - sensirion,sps30 + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + air-pollution-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml new file mode 100644 index 000000000000..7ec3ec94356b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers + +maintainers: + - Popa Stefan <stefan.popa@analog.com> + +description: | + Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf + +properties: + compatible: + enum: + - adi,adf4371 + - adi,adf4372 + + reg: + maxItems: 1 + + clocks: + description: + Definition of the external clock (see clock/clock-bindings.txt) + maxItems: 1 + + clock-names: + description: + Must be "clkin" + maxItems: 1 + + adi,mute-till-lock-en: + type: boolean + description: + If this property is present, then the supply current to RF8P and RF8N + output stage will shut down until the ADF4371/ADF4372 achieves lock as + measured by the digital lock detect circuitry. + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + frequency@0 { + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt deleted file mode 100644 index b9bbde3e13ed..000000000000 --- a/Documentation/devicetree/bindings/iio/light/isl29018.txt +++ /dev/null @@ -1,27 +0,0 @@ -* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor - -Required properties: - - - compatible: Should be one of - "isil,isl29018" - "isil,isl29023" - "isil,isl29035" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -isl29018@44 { - compatible = "isil,isl29018"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml new file mode 100644 index 000000000000..cbb00be8f359 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/isl29018.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient and infrared light sensing with proximity detection over an i2c + interface. + + https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf + +properties: + compatible: + enum: + - isil,isl29018 + - isil,isl29023 + - isil,isl29035 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt deleted file mode 100644 index 059dffa1829a..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt +++ /dev/null @@ -1,25 +0,0 @@ -* TAOS TSL 2580/2581/2583 ALS sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2580" - "amstaos,tsl2581" - "amstaos,tsl2583" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -tsl2581@29 { - compatible = "amstaos,tsl2581"; - reg = <0x29>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml new file mode 100644 index 000000000000..e86ef64ecf03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2580 + - amstaos,tsl2581 + - amstaos,tsl2583 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt deleted file mode 100644 index 1c5e6f17a1df..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt +++ /dev/null @@ -1,42 +0,0 @@ -* AMS/TAOS ALS and proximity sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2571" - "amstaos,tsl2671" - "amstaos,tmd2671" - "amstaos,tsl2771" - "amstaos,tmd2771" - "amstaos,tsl2572" - "amstaos,tsl2672" - "amstaos,tmd2672" - "amstaos,tsl2772" - "amstaos,tmd2772" - "avago,apds9930" - - reg: the I2C address of the device - -Optional properties: - - - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1> - are the only valid values. - - led-max-microamp - current for the proximity LED. Must be 100000, 50000, - 25000, or 13000. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -tsl2772@39 { - compatible = "amstaos,tsl2772"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - amstaos,proximity-diodes = <0>; - led-max-microamp = <100000>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml new file mode 100644 index 000000000000..ed2c3d5eadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing and proximity detection with an i2c interface. + https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf + +properties: + compatible: + enum: + - amstaos,tsl2571 + - amstaos,tsl2671 + - amstaos,tmd2671 + - amstaos,tsl2771 + - amstaos,tmd2771 + - amstaos,tsl2572 + - amstaos,tsl2672 + - amstaos,tmd2672 + - amstaos,tsl2772 + - amstaos,tmd2772 + - avago,apds9930 + + reg: + maxItems: 1 + + amstaos,proximity-diodes: + description: Proximity diodes to enable + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + interrupts: + maxItems: 1 + + led-max-microamp: + description: Current for the proximity LED + enum: + - 13000 + - 25000 + - 50000 + - 100000 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt index 797607460735..9963247706f2 100644 --- a/Documentation/devicetree/bindings/input/elan_i2c.txt +++ b/Documentation/devicetree/bindings/input/elan_i2c.txt @@ -13,9 +13,20 @@ Optional properties: pinctrl binding [1]). - vcc-supply: a phandle for the regulator supplying 3.3V power. - elan,trackpoint: touchpad can support a trackpoint (boolean) +- elan,clickpad: touchpad is a clickpad (the entire surface is a button) +- elan,middle-button: touchpad has a physical middle button +- elan,x_traces: number of antennas on the x axis +- elan,y_traces: number of antennas on the y axis +- some generic touchscreen properties [2]: + * touchscreen-size-x + * touchscreen-size-y + * touchscreen-x-mm + * touchscreen-y-mm + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt Example: &i2c1 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt new file mode 100644 index 000000000000..4e82fd575cec --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt @@ -0,0 +1,29 @@ +Amazon's Annapurna Labs Fabric Interrupt Controller + +Required properties: + +- compatible: should be "amazon,al-fic" +- reg: physical base address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: must be 2. + First cell defines the index of the interrupt within the controller. + Second cell is used to specify the trigger type and must be one of the + following: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 4 = active high level-sensitive +- interrupt-parent: specifies the parent interrupt controller. +- interrupts: describes which input line in the interrupt parent, this + fic's output is connected to. This field property depends on the parent's + binding + +Example: + +amazon_fic: interrupt-controller@0xfd8a8500 { + compatible = "amazon,al-fic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0xfd8a8500 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt index 1502a51548bb..7d531d5fff29 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -15,6 +15,7 @@ Required properties: "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) + "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 54838d4ea44c..9a47820ef346 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -92,6 +92,8 @@ properties: minItems: 2 maxItems: 4 + ranges: true + interrupts: description: Interrupt source of the parent interrupt controller on secondary GICs, or VGIC maintenance interrupt on primary GIC (see @@ -197,28 +199,28 @@ examples: interrupt-controller@e1101000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; interrupt-controller; interrupts = <1 8 0xf04>; - ranges = <0 0 0 0xe1100000 0 0x100000>; - reg = <0x0 0xe1110000 0 0x01000>, - <0x0 0xe112f000 0 0x02000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; + ranges = <0 0xe1100000 0x100000>; + reg = <0xe1110000 0x01000>, + <0xe112f000 0x02000>, + <0xe1140000 0x10000>, + <0xe1160000 0x10000>; - v2m0: v2m@8000 { + v2m0: v2m@80000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0x0 0x80000 0 0x1000>; + reg = <0x80000 0x1000>; }; //... - v2mN: v2m@9000 { + v2mN: v2m@90000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0x0 0x90000 0 0x1000>; + reg = <0x90000 0x1000>; }; }; ... diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt index ab921f1698fb..e13405355166 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt @@ -6,11 +6,16 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860 SMP soc, and it also could be used in non-SMP system. Interrupt number definition: - 0-15 : software irq, and we use 15 as our IPI_IRQ. 16-31 : private irq, and we use 16 as the co-processor timer. 31-1024: common irq for soc ip. +Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) + IRQ_TYPE_LEVEL_HIGH (default) + IRQ_TYPE_LEVEL_LOW + IRQ_TYPE_EDGE_RISING + IRQ_TYPE_EDGE_FALLING + ============================= intc node bindings definition ============================= @@ -26,15 +31,22 @@ intc node bindings definition - #interrupt-cells Usage: required Value type: <u32> - Definition: must be <1> + Definition: <2> - interrupt-controller: Usage: required -Examples: +Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>") --------- +#include <dt-bindings/interrupt-controller/irq.h> intc: interrupt-controller { compatible = "csky,mpintc"; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupt-controller; }; + + device: device-example { + ... + interrupts = <34 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt index 930fb462fd9f..0ebfc952cb34 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt @@ -23,7 +23,7 @@ Required properties: - marvell,spi-base : List of GIC base SPI interrupts, one for each ODMI frame. Those SPI interrupts are 0-based, i.e marvell,spi-base = <128> will use SPI #96. - See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt + See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for details about the GIC Device Tree binding. Example: diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt new file mode 100644 index 000000000000..727b7e4cd6e0 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt @@ -0,0 +1,43 @@ +DT bindings for the Renesas RZ/A1 Interrupt Controller + +The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas +RZ/A1 and RZ/A2 SoCs: + - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI + interrupts, + - NMI edge select. + +Required properties: + - compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as + fallback. + Examples with soctypes are: + - "renesas,r7s72100-irqc" (RZ/A1H) + - "renesas,r7s9210-irqc" (RZ/A2M) + - #interrupt-cells: Must be 2 (an interrupt index and flags, as defined + in interrupts.txt in this directory) + - #address-cells: Must be zero + - interrupt-controller: Marks the device as an interrupt controller + - reg: Base address and length of the memory resource used by the interrupt + controller + - interrupt-map: Specifies the mapping from external interrupts to GIC + interrupts + - interrupt-map-mask: Must be <7 0> + +Example: + + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt index 3538a214fff1..352f5e9c759b 100644 --- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt +++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt @@ -36,4 +36,4 @@ Example: kcs_chan = <2>; status = "disabled"; }; - };
\ No newline at end of file + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml index 4d61fe0a98a4..dc129d9a329e 100644 --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml @@ -23,16 +23,17 @@ properties: reg: maxItems: 1 - ti,linear-mapping-mode: - description: | - Enable linear mapping mode. If disabled, then it will use exponential - mapping mode in which the ramp up/down appears to have a more uniform - transition to the human eye. - type: boolean + '#address-cells': + const: 1 + + '#size-cells': + const: 0 required: - compatible - reg + - '#address-cells' + - '#size-cells' patternProperties: "^led@[01]$": @@ -48,7 +49,6 @@ patternProperties: in this property. The two current sinks can be controlled independently with both banks, or bank A can be configured to control both sinks with the led-sources property. - maxItems: 1 minimum: 0 maximum: 1 @@ -73,6 +73,13 @@ patternProperties: minimum: 0 maximum: 255 + ti,linear-mapping-mode: + description: | + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + required: - reg diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt index 896b6997cf30..21882c8d4b0c 100644 --- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -15,7 +15,7 @@ Optional properties: - power-supply: specifies the power source. It can either be a regulator or a gpio which enables a regulator, i.e. a regulator-fixed as described in - Documentation/devicetree/bindings/regulator/fixed-regulator.txt + Documentation/devicetree/bindings/regulator/fixed-regulator.yaml Example: diff --git a/Documentation/devicetree/bindings/leds/leds-lm36274.txt b/Documentation/devicetree/bindings/leds/leds-lm36274.txt new file mode 100644 index 000000000000..39c230d59a4d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm36274.txt @@ -0,0 +1,85 @@ +* Texas Instruments LM36274 4-Channel LCD Backlight Driver w/Integrated Bias + +The LM36274 is an integrated four-channel WLED driver and LCD bias supply. +The backlight boost provides the power to bias four parallel LED strings with +up to 29V total output voltage. The 11-bit LED current is programmable via +the I2C bus and/or controlled via a logic level PWM input from 60 uA to 30 mA. + +Parent device properties are documented in +Documentation/devicetree/bindings/mfd/ti-lmu.txt + +Regulator properties are documented in +Documentation/devicetree/bindings/regulator/lm363x-regulator.txt + +Required backlight properties: + - compatible: + "ti,lm36274-backlight" + - reg : 0 + - #address-cells : 1 + - #size-cells : 0 + - led-sources : Indicates which LED strings will be enabled. + Values from 0-3, sources is 0 based so strings will be + source value + 1. + +Optional backlight properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + }; + + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; + }; +}; + +For more product information please see the link below: +http://www.ti.com/lit/ds/symlink/lm36274.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt new file mode 100644 index 000000000000..63992d732959 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt @@ -0,0 +1,73 @@ +* Texas Instruments - LM3697 Highly Efficient White LED Driver + +The LM3697 11-bit LED driver provides high- +performance backlight dimming for 1, 2, or 3 series +LED strings while delivering up to 90% efficiency. + +This device is suitable for display and keypad lighting + +Required properties: + - compatible: + "ti,lm3697" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : GPIO pin to enable/disable the device + - vled-supply : LED supply + +Required child properties: + - reg : 0 - LED is Controlled by bank A + 1 - LED is Controlled by bank B + - led-sources : Indicates which HVLED string is associated to which + control bank. This is a zero based property so + HVLED1 = 0, HVLED2 = 1, HVLED3 = 2. + Additional information is contained + in Documentation/devicetree/bindings/leds/common.txt + +Optional child properties: + - ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +led-controller@36 { + compatible = "ti,lm3697"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x36>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + led-sources = <0 2>; + ti,brightness-resolution = <2047>; + ramp-up-us = <5000>; + ramp-down-us = <1000>; + label = "white:first_backlight_cluster"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,brightness-resolution = <255>; + ramp-up-us = <500>; + ramp-down-us = <1000>; + label = "white:second_backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/lit/ds/symlink/lm3697.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-spi-byte.txt b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt new file mode 100644 index 000000000000..28b6b2d9091e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt @@ -0,0 +1,44 @@ +* Single Byte SPI LED Device Driver. + +The driver can be used for controllers with a very simple SPI protocol: +- one LED is controlled by a single byte on MOSI +- the value of the byte gives the brightness between two values (lowest to + highest) +- no return value is necessary (no MISO signal) + +The value for lowest and highest brightness is dependent on the device and +therefore on the compatible string. + +Depending on the compatible string some special functions (like hardware +accelerated blinking) might can be supported too. + +The driver currently only supports one LED. The properties of the LED are +configured in a sub-node in the device node. + +Required properties: +- compatible: should be one of + * "ubnt,acb-spi-led" microcontroller (SONiX 8F26E611LA) based device + used for example in Ubiquiti airCube ISP + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. + +LED sub-node properties: +- label: + see Documentation/devicetree/bindings/leds/common.txt +- default-state: + see Documentation/devicetree/bindings/leds/common.txt + Only "on" and "off" are supported. + +Example: + +led-controller@0 { + compatible = "ubnt,acb-spi-led"; + reg = <0>; + spi-max-frequency = <100000>; + + led { + label = "white:status"; + default-state = "on"; + }; +}; diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt new file mode 100644 index 000000000000..a92e2fbf26c9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allegro.txt @@ -0,0 +1,43 @@ +Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx +ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265 +decoder ip core. + +Each actual codec engines is controlled by a microcontroller (MCU). Host +software uses a provided mailbox interface to communicate with the MCU. The +MCU share an interrupt. + +Required properties: + - compatible: value should be one of the following + "allegro,al5e-1.1", "allegro,al5e": encoder IP core + "allegro,al5d-1.1", "allegro,al5d": decoder IP core + - reg: base and length of the memory mapped register region and base and + length of the memory mapped sram + - reg-names: must include "regs" and "sram" + - interrupts: shared interrupt from the MCUs to the processing system + - clocks: must contain an entry for each entry in clock-names + - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + +Example: + al5e: video-codec@a0009000 { + compatible = "allegro,al5e-1.1", "allegro,al5e"; + reg = <0 0xa0009000 0 0x1000>, + <0 0xa0000000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + }; + al5d: video-codec@a0029000 { + compatible = "allegro,al5d-1.1", "allegro,al5d"; + reg = <0 0xa0029000 0 0x1000>, + <0 0xa0020000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + }; diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt new file mode 100644 index 000000000000..aabdd01bcf32 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,vdec.txt @@ -0,0 +1,71 @@ +Amlogic Video Decoder +================================ + +The video decoding IP lies within the DOS memory region, +except for the hardware bitstream parser that makes use of an undocumented +region. + +It makes use of the following blocks: + +- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks +then feed from this VIFIFO. +- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. +- VDEC_HEVC can decode HEVC and VP9. + +Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run +concurrently. + +Device Tree Bindings: +--------------------- + +VDEC: Video Decoder +-------------------------- + +Required properties: +- compatible: value should be different for each SoC family as : + - GXBB (S905) : "amlogic,gxbb-vdec" + - GXL (S905X, S905D) : "amlogic,gxl-vdec" + - GXM (S912) : "amlogic,gxm-vdec" +- reg: base address and size of he following memory-mapped regions : + - dos + - esparser +- reg-names: should contain the names of the previous memory regions +- interrupts: should contain the following IRQs: + - vdec + - esparser +- interrupt-names: should contain the names of the previous interrupts +- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node +- amlogic,canvas: should point to a canvas provider node +- clocks: should contain the following clocks : + - dos_parser + - dos + - vdec_1 + - vdec_hevc +- clock-names: should contain the names of the previous clocks +- resets: should contain the parser reset +- reset-names: should be "esparser" + +Example: + +vdec: video-decoder@c8820000 { + compatible = "amlogic,gxbb-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt index 3c07bc676bc3..443aef07356e 100644 --- a/Documentation/devicetree/bindings/media/imx7-csi.txt +++ b/Documentation/devicetree/bindings/media/imx7-csi.txt @@ -14,8 +14,7 @@ Required properties: - interrupts : should contain CSI interrupt; - clocks : list of clock specifiers, see Documentation/devicetree/bindings/clock/clock-bindings.txt for details; -- clock-names : must contain "axi", "mclk" and "dcic" entries, matching - entries in the clock property; +- clock-names : must contain "mclk"; The device node shall contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in: @@ -32,10 +31,8 @@ example: compatible = "fsl,imx7-csi"; reg = <0x30710000 0x10000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CSI_MCLK_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "axi", "mclk", "dcic"; + clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; + clock-names = "mclk"; port { csi_from_csi_mux: endpoint { diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt new file mode 100644 index 000000000000..7ec2c8c8a3b9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.txt @@ -0,0 +1,50 @@ +Marvell MMP2 camera host interface + +Required properties: + - compatible: Should be "marvell,mmp2-ccic". + - reg: Register base and size. + - interrupts: The interrupt number. + - #clock-cells: Must be 0. + +Optional properties: + - clocks: Reference to the input clock as specified by + Documentation/devicetree/bindings/clock/clock-bindings.txt. + - clock-names: Names of the clocks used; "axi" for the AXI bus interface, + "func" for the peripheral clock and "phy" for the parallel + video bus interface. + - clock-output-names: Optional clock source for sensors. Shall be "mclk". + +Required subnodes: + - port: The parallel bus interface port with a single endpoint linked to + the sensor's endpoint as described in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +Required endpoint properties: + - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively + - pclk-sample: pixel clock polarity + - hsync-active: horizontal synchronization polarity (only required for + parallel bus) + - vsync-active: vertical synchronization polarity (only required for + parallel bus) + +Example: + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <42>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + bus-type = <5>; /* Parallel */ + hsync-active = <1>; /* Active high */ + vsync-active = <1>; /* Active high */ + pclk-sample = <0>; /* Falling */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt index 249790a93017..3122ded82eb4 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt @@ -11,7 +11,7 @@ Required properties: - clock-names: must contain "mclk", which is the DCMI peripherial clock - pinctrl: the pincontrol settings to configure muxing properly for pins that connect to DCMI device. - See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt. + See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml. - dmas: phandle to DMA controller node, see Documentation/devicetree/bindings/dma/stm32-dma.txt - dma-names: must contain "tx", which is the transmit channel from DCMI to DMA diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt index 0dd540bb03db..a2e3e56f0257 100644 --- a/Documentation/devicetree/bindings/media/sun6i-csi.txt +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -6,6 +6,7 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. Required properties: - compatible: value must be one of: * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-a83t-csi" * "allwinner,sun8i-h3-csi" * "allwinner,sun8i-v3s-csi" * "allwinner,sun50i-a64-csi" diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt index f936b5589b19..59b8dcc118ee 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,jz4780-nemc.txt @@ -5,6 +5,7 @@ controller in Ingenic JZ4780 Required properties: - compatible: Should be set to one of: + "ingenic,jz4740-nemc" (JZ4740) "ingenic,jz4780-nemc" (JZ4780) - reg: Should specify the NEMC controller registers location and length. - clocks: Clock for the NEMC controller. diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 7f0cd72f47d2..699fd3c9ace8 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -17,17 +17,24 @@ Required properties for USART in SPI mode: - cs-gpios: chipselects (internal cs not supported) - atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) +Optional properties in serial and SPI mode: +- dma bindings for dma transfer: + - dmas: DMA specifier, consisting of a phandle to DMA controller node, + memory peripheral interface and USART DMA channel ID, FIFO configuration. + The order of DMA channels is fixed. The first DMA channel must be TX + associated channel and the second one must be RX associated channel. + Refer to dma.txt and atmel-dma.txt for details. + - dma-names: "tx" for TX channel. + "rx" for RX channel. + The order of dma-names is also fixed. The first name must be "tx" + and the second one must be "rx" as in the examples below. + Optional properties in serial mode: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. It will use specified PIO instead of the peripheral function pin for the USART feature. If unsure, don't specify this property. -- add dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "rx" for RX channel, "tx" for TX channel. - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable USARTs. - rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt @@ -81,5 +88,8 @@ Example: interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&usart0_clk>; clock-names = "usart"; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; cs-gpios = <&pioB 3 0>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 86ca786d54fc..2296b8f24de4 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -8,7 +8,7 @@ TI LMU driver supports lighting devices below. LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor LM3695 Backlight - LM3697 Backlight and fault monitor + LM36274 Backlight and regulator Required properties: - compatible: Should be one of: @@ -16,15 +16,32 @@ Required properties: "ti,lm3632" "ti,lm3633" "ti,lm3695" - "ti,lm3697" + "ti,lm36274" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 - 0x36 for LM3633, LM3697 + 0x36 for LM3633 0x63 for LM3695 + 0x11 for LM36274 -Optional property: +Optional properties: - enable-gpios: A GPIO specifier for hardware enable pin. + - ramp-up-us: Current ramping from one brightness level to + the a higher brightness level. + Range from 2048 us - 117.44 s + - ramp-down-us: Current ramping from one brightness level to + the a lower brightness level. + Range from 2048 us - 117.44 s + - ti,brightness-resolution - This determines whether to use 8 bit brightness + mode or 11 bit brightness mode. If this value is + not set the device is defaulted to the preferred + 8bit brightness mode per 7.3.4.1 of the data + sheet. This setting can either be in the parent + node or as part of the LED child nodes. This + is determined by the part itself if the strings + have a common brightness register or individual + brightness registers. + The values are 255 (8bit) or 2047 (11bit). Required node: - backlight: All LMU devices have backlight child nodes. @@ -35,14 +52,15 @@ Optional nodes: Required properties: - compatible: Should be one of: "ti,lm3633-fault-monitor" - "ti,lm3697-fault-monitor" - leds: LED properties for LM3633. Please refer to [2]. + LED properties for LM36274. Please refer to [4]. - regulators: Regulator properties for LM3631 and LM3632. Please refer to [3]. [1] ../leds/backlight/ti-lmu-backlight.txt [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt +[4] ../leds/leds-lm36274.txt lm3631@29 { compatible = "ti,lm3631"; @@ -90,7 +108,7 @@ lm3631@29 { lcd_bl { led-sources = <0 1>; - ramp-up-msec = <300>; + ramp-up-us = <300000>; }; }; }; @@ -152,15 +170,15 @@ lm3633@36 { main { label = "main_lcd"; led-sources = <1 2>; - ramp-up-msec = <500>; - ramp-down-msec = <500>; + ramp-up-us = <500000>; + ramp-down-us = <500000>; }; front { label = "front_lcd"; led-sources = <0>; - ramp-up-msec = <1000>; - ramp-down-msec = <0>; + ramp-up-us = <1000000>; + ramp-down-us = <0>; }; }; @@ -201,23 +219,51 @@ lm3695@63 { }; }; -lm3697@36 { - compatible = "ti,lm3697"; - reg = <0x36>; +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; - backlight { - compatible = "ti,lm3697-backlight"; + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <200>; - ramp-down-msec = <200>; + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; }; }; - fault-monitor { - compatible = "ti,lm3697-fault-monitor"; + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; }; }; diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt new file mode 100644 index 000000000000..e3289634fa30 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt @@ -0,0 +1,58 @@ +* Xilinx SDFEC(16nm) IP * + +The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block +which provides high-throughput LDPC and Turbo Code implementations. +The LDPC decode & encode functionality is capable of covering a range of +customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality +principally covers codes used by LTE. The FEC Engine offers significant +power and area savings versus implementations done in the FPGA fabric. + + +Required properties: +- compatible: Must be "xlnx,sd-fec-1.1" +- clock-names : List of input clock names from the following: + - "core_clk", Main processing clock for processing core (required) + - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) + - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) + - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) + - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) + - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) + - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) + - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) +- clocks : Clock phandles (see clock_bindings.txt for details). +- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers + location and length. +- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes + being used. +- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +Optional properties: +- interrupts: should contain SDFEC interrupt number + +Example +--------------------------------------- + sd_fec_0: sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; + clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; + reg = <0x0 0xa0040000 0x0 0x40000>; + interrupt-parent = <&axi_intc>; + interrupts = <1 0>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-dout-words = <0>; + xlnx,sdfec-dout-width = <1>; + }; diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml new file mode 100644 index 000000000000..df0280edef97 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MMC Controller Device Tree Bindings + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + oneOf: + - const: allwinner,sun4i-a10-mmc + - const: allwinner,sun5i-a13-mmc + - const: allwinner,sun7i-a20-mmc + - const: allwinner,sun8i-a83t-emmc + - const: allwinner,sun9i-a80-mmc + - const: allwinner,sun50i-a64-emmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-a83t-mmc + - const: allwinner,sun7i-a20-mmc + - items: + - const: allwinner,sun50i-h6-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun50i-h6-mmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-r40-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun8i-r40-mmc + - const: allwinner,sun50i-a64-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Output Clock + - description: Sample Clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: ahb + - const: mmc + - const: output + - const: sample + + resets: + maxItems: 1 + + reset-names: + const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt index 13e70409e8ac..ccc5358db131 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt @@ -22,6 +22,10 @@ Required properties: clock rate requested by the MMC core. - resets : phandle of the internal reset line +Optional properties: +- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the + DRAM memory, like on the G12A dedicated SDIO controller. + Example: sd_emmc_a: mmc@70000 { diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml new file mode 100644 index 000000000000..080754e0ef35 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -0,0 +1,374 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller Generic Binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: | + These properties are common to multiple MMC host controllers. Any host + that requires the respective functionality should implement them using + these definitions. + +properties: + $nodename: + pattern: "^mmc(@.*)?$" + + "#address-cells": + const: 1 + description: | + The cell is the slot ID if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4, 8] + default: 1 + description: + Number of data lines. + + max-frequency: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 400000 + - maximum: 200000000 + description: + Maximum operating frequency of the bus. + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always + used for the write-protect detection. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. + + wp-gpios: + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + dsr: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 0xffff + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 4 + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + + post-power-on-delay-ms: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 10 + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + # Deprecated: enable-sdio-wakeup + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: | + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + broken-hpi: + $ref: /schemas/types.yaml#/definitions/flag + description: + Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used. + + required: + - reg + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] + +examples: + - | + sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; + keep-power-in-suspend; + wakeup-source; + mmc-pwrseq = <&sdhci0_pwrseq>; + }; + + - | + mmc3: mmc@1c12000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm43xx-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 8>; + interrupt-names = "host-wake"; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index c269dbe384fe..bf9d7d3febf1 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -1,177 +1 @@ -These properties are common to multiple MMC host controllers. Any host -that requires the respective functionality should implement them using -these definitions. - -Interpreted by the OF core: -- reg: Registers location and length. -- interrupts: Interrupts used by the MMC controller. - -Card detection: -If no property below is supplied, host native card detect is used. -Only one of the properties in this section should be supplied: - - broken-cd: There is no card detection available; polling must be used. - - cd-gpios: Specify GPIOs for card detection, see gpio binding - - non-removable: non-removable slot (like eMMC); assume always present. - -Optional properties: -- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default - will be <1> if the property is absent. -- wp-gpios: Specify GPIOs for write protection, see gpio binding -- cd-inverted: when present, polarity on the CD line is inverted. See the note - below for the case, when a GPIO is used for the CD line -- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. - It's only valid when cd-gpios is present. -- wp-inverted: when present, polarity on the WP line is inverted. See the note - below for the case, when a GPIO is used for the WP line -- disable-wp: When set no physical WP line is present. This property should - only be specified when the controller has a dedicated write-protect - detection logic. If a GPIO is always used for the write-protect detection - logic it is sufficient to not specify wp-gpios property in the absence of a WP - line. -- max-frequency: maximum operating clock frequency -- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on - this system, even if the controller claims it is. -- cap-sd-highspeed: SD high-speed timing is supported -- cap-mmc-highspeed: MMC high-speed timing is supported -- sd-uhs-sdr12: SD UHS SDR12 speed is supported -- sd-uhs-sdr25: SD UHS SDR25 speed is supported -- sd-uhs-sdr50: SD UHS SDR50 speed is supported -- sd-uhs-sdr104: SD UHS SDR104 speed is supported -- sd-uhs-ddr50: SD UHS DDR50 speed is supported -- cap-power-off-card: powering off the card is safe -- cap-mmc-hw-reset: eMMC hardware reset is supported -- cap-sdio-irq: enable SDIO IRQ signalling on this interface -- full-pwr-cycle: full power cycle of the card is supported -- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported -- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported -- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported -- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported -- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported -- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported -- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported -- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported -- dsr: Value the card's (optional) Driver Stage Register (DSR) should be - programmed with. Valid range: [0 .. 0xffff]. -- no-sdio: controller is limited to send sdio cmd during initialization -- no-sd: controller is limited to send sd cmd during initialization -- no-mmc: controller is limited to send mmc cmd during initialization -- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. - The value <n> is the driver type as specified in the eMMC specification - (table 206 in spec version 5.1). -- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could - be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, regardless of - whether pwrseq-simple is used. Default to 10ms if no available. -- supports-cqe : The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. -- disable-cqe-dcmd: This property indicates that the MMC controller's command - queue engine (CQE) does not support direct commands (DCMDs). - -*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line -polarity properties, we have to fix the meaning of the "normal" and "inverted" -line levels. We choose to follow the SDHCI standard, which specifies both those -lines as "active low." Therefore, using the "cd-inverted" property means, that -the CD line is active high, i.e. it is high, when a card is inserted. Similar -logic applies to the "wp-inverted" property. - -CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs, -specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of -dedicated pins can be specified, using *-inverted properties. GPIO polarity can -also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity -in the latter case. We choose to use the XOR logic for GPIO CD and WP lines. -This means, the two properties are "superimposed," for example leaving the -GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property -property results in a double-inversion and actually means the "normal" line -polarity is in effect. - -Optional SDIO properties: -- keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- wakeup-source: Enables wake up of host system on SDIO IRQ assertion - (Legacy property supported: "enable-sdio-wakeup") - -MMC power ---------- - -Controllers may implement power control from both the connected cards and -the IO signaling (for example to change to high-speed 1.8V signalling). If -the system supports this, then the following two properties should point -to valid regulator nodes: - -- vqmmc-supply: supply node for IO line power -- vmmc-supply: supply node for card's power - - -MMC power sequences: --------------------- - -System on chip designs may specify a specific MMC power sequence. To -successfully detect an (e)MMC/SD/SDIO card, that power sequence must be -maintained while initializing the card. - -Optional property: -- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" - for documentation of MMC power sequence bindings. - - -Use of Function subnodes ------------------------- - -On embedded systems the cards connected to a host may need additional -properties. These can be specified in subnodes to the host controller node. -The subnodes are identified by the standard 'reg' property. -Which information exactly can be specified depends on the bindings for the -SDIO function driver for the subnode, as specified by the compatible string. - -Required host node properties when using function subnodes: -- #address-cells: should be one. The cell is the slot id. -- #size-cells: should be zero. - -Required function subnode properties: -- reg: Must contain the SDIO function number of the function this subnode - describes. A value of 0 denotes the memory SD function, values from - 1 to 7 denote the SDIO functions. - -Optional function subnode properties: -- compatible: name of SDIO function following generic names recommended practice - - -Examples --------- - -Basic example: - -sdhci@ab000000 { - compatible = "sdhci"; - reg = <0xab000000 0x200>; - interrupts = <23>; - bus-width = <4>; - cd-gpios = <&gpio 69 0>; - cd-inverted; - wp-gpios = <&gpio 70 0>; - max-frequency = <50000000>; - keep-power-in-suspend; - wakeup-source; - mmc-pwrseq = <&sdhci0_pwrseq> -} - -Example with sdio function subnode: - -mmc3: mmc@1c12000 { - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&sdhci0_pwrseq> - - brcmf: bcrmf@1 { - reg = <1>; - compatible = "brcm,bcm43xx-fmac"; - interrupt-parent = <&pio>; - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; +This file has moved to mmc-controller.yaml. diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt index 2b4f17ca9087..dd08d038a65c 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt @@ -1,13 +1,4 @@ -* Toshiba Mobile IO SD/MMC controller - -The tmio-mmc driver doesn't probe its devices actively, instead its binding to -devices is managed by either MFD drivers or by the sh_mobile_sdhi platform -driver. Those drivers supply the tmio-mmc driver with platform data, that either -describe hardware capabilities, known to them, or are obtained by them from -their own platform data or from their DT information. In the latter case all -compulsory and any optional properties, common to all SD/MMC drivers, as -described in mmc.txt, can be used. Additionally the following tmio_mmc-specific -optional bindings can be used. +* Renesas SDHI SD/MMC controller Required properties: - compatible: should contain one or more of the following: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt index 15dbbbace27e..50e87df47971 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -8,7 +8,10 @@ Only deviations are documented here. [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Required Properties: - - compatible: should be "ti,am654-sdhci-5.1" + - compatible: should be one of: + "ti,am654-sdhci-5.1": SDHCI on AM654 device. + "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. + "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. - reg: Must be two entries. - The first should be the sdhci register space - The second should the subsystem/phy register space @@ -16,9 +19,13 @@ Required Properties: - clock-names: Tuple including "clk_xin" and "clk_ahb" - interrupts: Interrupt specifiers - ti,otap-del-sel: Output Tap Delay select + +Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - ti,trm-icp: DLL trim select - ti,driver-strength-ohm: driver strength in ohms. Valid values are 33, 40, 50, 66 and 100 ohms. +Optional Properties: + - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt index 45c9978aad7b..eb7eb1b529f0 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt @@ -14,10 +14,31 @@ Required properties: - clock-names: Should contain the following: "sdio" - SDIO source clock (required) "enable" - gate clock which used for enabling/disabling the device (required) + "2x_enable" - gate clock controlling the device for some special platforms (optional) Optional properties: - assigned-clocks: the same with "sdio" clock - assigned-clock-parents: the default parent of "sdio" clock +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin control +- pinctrl-1: should contain uhs mode pin control + +PHY DLL delays are used to delay the data valid window, and align the window +to sampling clock. PHY DLL delays can be configured by following properties, +and each property contains 4 cells which are used to configure the clock data +write line delay value, clock read command line delay value, clock read data +positive edge delay value and clock read data negative edge delay value. +Each cell's delay value unit is cycle of the PHY clock. + +- sprd,phy-delay-legacy: Delay value for legacy timing. +- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing. +- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing. +- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing. +- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing. +- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing. +- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing. Examples: @@ -32,6 +53,11 @@ sdio0: sdio@20600000 { assigned-clocks = <&ap_clk CLK_EMMC_2X>; assigned-clock-parents = <&rpll CLK_RPLL_390M>; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + + sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>; bus-width = <8>; non-removable; no-sdio; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt deleted file mode 100644 index e9cb3ec5e502..000000000000 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Allwinner sunxi MMC controller - -The highspeed MMC host controller on Allwinner SoCs provides an interface -for MMC, SD and SDIO types of memory cards. - -Supported maximum speeds are the ones of the eMMC standard 4.5 as well -as the speed of SD standard 3.0. -Absolute maximum transfer rate is 200MB/s - -Required properties: - - compatible : should be one of: - * "allwinner,sun4i-a10-mmc" - * "allwinner,sun5i-a13-mmc" - * "allwinner,sun7i-a20-mmc" - * "allwinner,sun8i-a83t-emmc" - * "allwinner,sun9i-a80-mmc" - * "allwinner,sun50i-a64-emmc" - * "allwinner,sun50i-a64-mmc" - * "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc" - * "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc" - - reg : mmc controller base registers - - clocks : a list with 4 phandle + clock specifier pairs - - clock-names : must contain "ahb", "mmc", "output" and "sample" - - interrupts : mmc controller interrupt - -Optional properties: - - resets : phandle + reset specifier pair - - reset-names : must contain "ahb" - - for cd, bus-width and additional generic mmc parameters - please refer to mmc.txt within this directory - -Examples: - - Within .dtsi: - mmc0: mmc@1c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; - clock-names = "ahb", "mod", "output", "sample"; - interrupts = <0 32 4>; - status = "disabled"; - }; - - - Within dts: - mmc0: mmc@1c0f000 { - pinctrl-names = "default", "default"; - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-1 = <&mmc0_cd_pin_reference_design>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index fbd4da3684fc..e5a411518be1 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -57,7 +57,6 @@ patternProperties: "^nand@[a-f0-9]+$": properties: reg: - maxItems: 1 minimum: 0 maximum: 7 diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt index 3983c11e062c..5794ab1147c1 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt @@ -24,7 +24,7 @@ Optional children nodes: Children nodes represent the available nand chips. Other properties: -see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. +see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings. Example demonstrate on AXG SoC: diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index bcda1dfc4bac..0b7c3738b66c 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -101,12 +101,12 @@ Required properties: number (e.g., 0, 1, 2, etc.) - #address-cells : see partition.txt - #size-cells : see partition.txt -- nand-ecc-strength : see nand.txt -- nand-ecc-step-size : must be 512 or 1024. See nand.txt +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml Optional properties: - nand-on-flash-bbt : boolean, to enable the on-flash BBT for this - chip-select. See nand.txt + chip-select. See nand-controller.yaml - brcm,nand-oob-sector-size : integer, to denote the spare area sector size expected for the ECC layout in use. This size, in addition to the strength and step-size, diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index b14b6751c2f3..b32aed1db46d 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -22,16 +22,16 @@ Sub-nodes: select is connected. Optional properties: - - nand-ecc-step-size: see nand.txt for details. + - nand-ecc-step-size: see nand-controller.yaml for details. If present, the value must be 512 for "altr,socfpga-denali-nand" 1024 for "socionext,uniphier-denali-nand-v5a" 1024 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-strength: see nand.txt for details. Valid values are: + - nand-ecc-strength: see nand-controller.yaml for details. Valid values are: 8, 15 for "altr,socfpga-denali-nand" 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" 8, 16 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-maximize: see nand.txt for details + - nand-ecc-maximize: see nand-controller.yaml for details The chip nodes may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt index 32636eb77304..6762d3c4d5a4 100644 --- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt @@ -30,9 +30,9 @@ Optional properties: command is asserted. Zero means one cycle, 255 means 256 cycles. - bank: default NAND bank to use (0-3 are valid, 0 is the default). -- nand-ecc-mode : see nand.txt -- nand-ecc-strength : see nand.txt -- nand-ecc-step-size : see nand.txt +- nand-ecc-mode : see nand-controller.yaml +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : see nand-controller.yaml Can support 1-bit HW ECC (default) or if stronger correction is required, software-based BCH. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index c059ab74ed88..44919d48d241 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -8,7 +8,7 @@ explained in a separate documents - please refer to Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For NAND specific properties such as ECC modes or bus width, please refer to -Documentation/devicetree/bindings/mtd/nand.txt +Documentation/devicetree/bindings/mtd/nand-controller.yaml Required properties: diff --git a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt index 2e35f0662912..8963983ae7cb 100644 --- a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt +++ b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt @@ -7,7 +7,7 @@ Required properties: NAND controller's registers. The second contains base physical address and size of NAND controller's buffer. - interrupts: Interrupt number for nfc. -- nand-bus-width: See nand.txt. +- nand-bus-width: See nand-controller.yaml. - nand-ecc-mode: Support none and hw ecc mode. - #address-cells: Partition address, should be set 1. - #size-cells: Partition size, should be set 1. diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt index e0c790706b9b..a2d9a0f2b683 100644 --- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt +++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt @@ -36,29 +36,29 @@ Children nodes represent the available NAND chips. Required properties: - reg: shall contain the native Chip Select ids (0-3). -- nand-rb: see nand.txt (0-1). +- nand-rb: see nand-controller.yaml (0-1). Optional properties: - marvell,nand-keep-config: orders the driver not to take the timings from the core and leaving them completely untouched. Bootloader timings will then be used. - label: MTD name. -- nand-on-flash-bbt: see nand.txt. -- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified. -- nand-ecc-algo: see nand.txt. This property is essentially useful when +- nand-on-flash-bbt: see nand-controller.yaml. +- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified. +- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when not using hardware ECC. Howerver, it may be added when using hardware ECC for clarification but will be ignored by the driver because ECC mode is chosen depending on the page size and the strength required by the NAND chip. This value may be overwritten with nand-ecc-strength property. -- nand-ecc-strength: see nand.txt. -- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does +- nand-ecc-strength: see nand-controller.yaml. +- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual step size will shrink or grow in order to fit the required strength. Step sizes are not completely random for all and follow certain patterns described in AN-379, "Marvell SoC NFC ECC". -See Documentation/devicetree/bindings/mtd/nand.txt for more details on +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on generic bindings. diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt index b5833d11c7be..2857c628fba4 100644 --- a/Documentation/devicetree/bindings/mtd/mxc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.txt @@ -4,9 +4,9 @@ Required properties: - compatible: "fsl,imxXX-nand" - reg: address range of the nfc block - interrupts: irq to be used -- nand-bus-width: see nand.txt -- nand-ecc-mode: see nand.txt -- nand-on-flash-bbt: see nand.txt +- nand-bus-width: see nand-controller.yaml +- nand-ecc-mode: see nand-controller.yaml +- nand-on-flash-bbt: see nand-controller.yaml Example: diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt index b2f2ca12f9e6..e737e5beb7bf 100644 --- a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt +++ b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt @@ -26,14 +26,14 @@ Optional children node properties: "hw" is supported. - nand-ecc-algo: string, algorithm of NAND ECC. Supported values with "hw" ECC mode are: "rs", "bch". -- nand-bus-width : See nand.txt -- nand-on-flash-bbt: See nand.txt +- nand-bus-width : See nand-controller.yaml +- nand-on-flash-bbt: See nand-controller.yaml - nand-ecc-strength: integer representing the number of bits to correct per ECC step (always 512). Supported strength using HW ECC modes are: - RS: 4, 6, 8 - BCH: 4, 8, 14, 16 -- nand-ecc-maximize: See nand.txt +- nand-ecc-maximize: See nand-controller.yaml - nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM are chosen. - wp-gpios: GPIO specifier for the write protect pin. diff --git a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt index 56d5c19da41d..2ba07fc8b79c 100644 --- a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt +++ b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt @@ -1,6 +1,6 @@ * Oxford Semiconductor OXNAS NAND Controller -Please refer to nand.txt for generic information regarding MTD NAND bindings. +Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings. Required properties: - compatible: "oxsemi,ox820-nand" diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt index 1123cc6d56ef..5c2fba4b30fe 100644 --- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt @@ -47,8 +47,8 @@ Required properties: - #size-cells: see partition.txt Optional properties: -- nand-bus-width: see nand.txt -- nand-ecc-strength: see nand.txt. If not specified, then ECC strength will +- nand-bus-width: see nand-controller.yaml +- nand-ecc-strength: see nand-controller.yaml. If not specified, then ECC strength will be used according to chip requirement and available OOB size. diff --git a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt index 0040eb8895e0..09815c40fc8a 100644 --- a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt +++ b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt @@ -6,7 +6,7 @@ Required properties: "samsung,s3c2412-nand" "samsung,s3c2440-nand" - reg : register's location and length. -- #address-cells, #size-cells : see nand.txt +- #address-cells, #size-cells : see nand-controller.yaml - clocks : phandle to the nand controller clock - clock-names : must contain "nand" @@ -14,8 +14,8 @@ Optional child nodes: Child nodes representing the available nand chips. Optional child properties: -- nand-ecc-mode : see nand.txt -- nand-on-flash-bbt : see nand.txt +- nand-ecc-mode : see nand-controller.yaml +- nand-on-flash-bbt : see nand-controller.yaml Each child device node may optionally contain a 'partitions' sub-node, which further contains sub-nodes describing the flash partition mapping. diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt index ad2bef826582..e55895e8dae4 100644 --- a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt +++ b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt @@ -24,9 +24,9 @@ Required properties: - reg: describes the CS lines assigned to the NAND device. Optional properties: -- nand-on-flash-bbt: see nand.txt -- nand-ecc-strength: see nand.txt -- nand-ecc-step-size: see nand.txt +- nand-on-flash-bbt: see nand-controller.yaml +- nand-ecc-strength: see nand-controller.yaml +- nand-ecc-step-size: see nand-controller.yaml The following ECC strength and step size are currently supported: - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming) diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt index cd1bf2ac9055..91c8420241af 100644 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ b/Documentation/devicetree/bindings/mtd/tango-nand.txt @@ -11,7 +11,7 @@ Required properties: - #size-cells: <0> Children nodes represent the available NAND chips. -See Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings. Example: diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt index c96eeb65f450..7db5e6e609df 100644 --- a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt +++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt @@ -25,14 +25,14 @@ only handle one NAND chip. Required properties: - compatible: Should be set to "fsl,vf610-nfc-cs". -- nand-bus-width: see nand.txt -- nand-ecc-mode: see nand.txt +- nand-bus-width: see nand-controller.yaml +- nand-ecc-mode: see nand-controller.yaml Required properties for hardware ECC: -- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt) +- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand-controller.yaml) - nand-ecc-step-size: step size equals page size, currently only 2k pages are supported -- nand-on-flash-bbt: see nand.txt +- nand-on-flash-bbt: see nand-controller.yaml Example: diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt deleted file mode 100644 index a9bfb4d8b6ac..000000000000 --- a/Documentation/devicetree/bindings/mux/mmio-mux.txt +++ /dev/null @@ -1,60 +0,0 @@ -MMIO register bitfield-based multiplexer controller bindings - -Define register bitfields to be used to control multiplexers. The parent -device tree node must be a syscon node to provide register access. - -Required properties: -- compatible : "mmio-mux" -- #mux-control-cells : <1> -- mux-reg-masks : an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. -* Standard mux-controller bindings as decribed in mux-controller.txt - -Optional properties: -- idle-states : if present, the state the muxes will have when idle. The - special state MUX_IDLE_AS_IS is the default. - -The multiplexer state of each multiplexer is defined as the value of the -bitfield described by the corresponding register offset and bitfield mask pair -in the mux-reg-masks array, accessed through the parent syscon. - -Example: - - syscon { - compatible = "syscon"; - - mux: mux-controller { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - - mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ - <0x3 0x40>, /* 1: reg 0x3, bit 6 */ - idle-states = <MUX_IDLE_AS_IS>, <0>; - }; - }; - - video-mux { - compatible = "video-mux"; - mux-controls = <&mux 0>; - - ports { - /* inputs 0..3 */ - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - port@2 { - reg = <2>; - }; - port@3 { - reg = <3>; - }; - - /* output */ - port@4 { - reg = <4>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mux/reg-mux.txt b/Documentation/devicetree/bindings/mux/reg-mux.txt new file mode 100644 index 000000000000..4afd7ba73d60 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/reg-mux.txt @@ -0,0 +1,129 @@ +Generic register bitfield-based multiplexer controller bindings + +Define register bitfields to be used to control multiplexers. The parent +device tree node must be a device node to provide register r/w access. + +Required properties: +- compatible : should be one of + "reg-mux" : if parent device of mux controller is not syscon device + "mmio-mux" : if parent device of mux controller is syscon device +- #mux-control-cells : <1> +- mux-reg-masks : an array of register offset and pre-shifted bitfield mask + pairs, each describing a single mux control. +* Standard mux-controller bindings as decribed in mux-controller.txt + +Optional properties: +- idle-states : if present, the state the muxes will have when idle. The + special state MUX_IDLE_AS_IS is the default. + +The multiplexer state of each multiplexer is defined as the value of the +bitfield described by the corresponding register offset and bitfield mask +pair in the mux-reg-masks array. + +Example 1: +The parent device of mux controller is not a syscon device. + +&i2c0 { + fpga@66 { // fpga connected to i2c + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + }; +}; + +mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +Example 2: +The parent device of mux controller is syscon device. + +syscon { + compatible = "syscon"; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ + <0x3 0x40>, /* 1: reg 0x3, bit 6 */ + idle-states = <MUX_IDLE_AS_IS>, <0>; + }; +}; + +video-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + /* inputs 0..3 */ + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + + /* output */ + port@4 { + reg = <4>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml new file mode 100644 index 000000000000..792196bf4abd --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun4i-a10-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + allwinner,sram: + description: Phandle to the device SRAM + $ref: /schemas/types.yaml#/definitions/phandle-array + +required: + - compatible + - reg + - interrupts + - clocks + - phy-handle + - allwinner,sram + +examples: + - | + emac: ethernet@1c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + phy-handle = <&phy0>; + allwinner,sram = <&emac_sram 1>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml new file mode 100644 index 000000000000..df24d9d969f7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MDIO Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + enum: + - allwinner,sun4i-a10-mdio + + # Deprecated + - allwinner,sun4i-mdio + + required: + - compatible + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-mdio + + reg: + maxItems: 1 + + phy-supply: + description: PHY regulator + +required: + - compatible + - reg + +examples: + - | + mdio@1c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + #address-cells = <1>; + #size-cells = <0>; + phy-supply = <®_emac_3v3>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt deleted file mode 100644 index e98118aef5f6..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Allwinner EMAC ethernet controller - -Required properties: -- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: - "allwinner,sun4i-emac") -- reg: address and length of the register set for the device. -- interrupts: interrupt for the device -- phy: see ethernet.txt file in the same directory. -- clocks: A phandle to the reference clock for this device - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; - phy = <&phy0>; -}; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt deleted file mode 100644 index ab5b8613b0ef..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner A10 MDIO Ethernet Controller interface - -Required properties: -- compatible: should be "allwinner,sun4i-a10-mdio" - (Deprecated: "allwinner,sun4i-mdio"). -- reg: address and length of the register set for the device. - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Example at the SoC level: -mdio@1c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - #address-cells = <1>; - #size-cells = <0>; -}; - -And at the board level: - -mdio@1c0b080 { - phy-supply = <®_emac_3v3>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt deleted file mode 100644 index 8b3f953656e3..000000000000 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: - - compatible: Should be "allwinner,sun7i-a20-gmac" - - clocks: Should contain the GMAC main clock, and tx clock - The tx clock type should be "allwinner,sun7i-a20-gmac-clk" - - clock-names: Should contain the clock names "stmmaceth", - and "allwinner_gmac_tx" - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Examples: - - gmac: ethernet@1c50000 { - compatible = "allwinner,sun7i-a20-gmac"; - reg = <0x01c50000 0x10000>, - <0x01c20164 0x4>; - interrupts = <0 85 1>; - interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx>; - clock-names = "stmmaceth", "allwinner_gmac_tx"; - phy-mode = "mii"; - }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml new file mode 100644 index 000000000000..06b1cc8bea14 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 GMAC Device Tree Bindings + +allOf: + - $ref: "snps,dwmac.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun7i-a20-gmac + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: GMAC main clock + - description: TX clock + + clock-names: + items: + - const: stmmaceth + - const: allwinner_gmac_tx + + phy-supply: + description: + PHY regulator + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phy-mode + +examples: + - | + gmac: ethernet@1c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>; + interrupts = <0 85 1>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + phy-mode = "mii"; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml new file mode 100644 index 000000000000..d4084c149768 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -0,0 +1,321 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t EMAC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-emac + - const: allwinner,sun8i-h3-emac + - const: allwinner,sun8i-r40-emac + - const: allwinner,sun8i-v3s-emac + - const: allwinner,sun50i-a64-emac + - items: + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to the device containing the EMAC or GMAC clock + register + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - phy-handle + - phy-mode + - syscon + +allOf: + - $ref: "snps,dwmac.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + + then: + properties: + allwinner,tx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 3100 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-emac + + then: + properties: + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + + then: + properties: + allwinner,leds-active-low: + $ref: /schemas/types.yaml#definitions/flag + description: + EPHY LEDs are active low. + + mdio-mux: + type: object + + properties: + compatible: + const: allwinner,sun8i-h3-mdio-mux + + mdio-parent-bus: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to EMAC MDIO. + + mdio@1: + type: object + description: Internal MDIO Bus + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun8i-h3-mdio-internal + + reg: + const: 1 + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + description: + Integrated PHY node + + properties: + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + required: + - clocks + - resets + + + mdio@2: + type: object + description: External MDIO Bus (H3 only) + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + const: 2 + + required: + - compatible + - mdio-parent-bus + - mdio@1 + +examples: + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio1>; + + int_mii_phy: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + phy-is-integrated; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio2: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio2>; + + mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 13>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + phy-handle = <&ext_rgmii_phy1>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt index 188c8bd4eb67..5a0111d4de58 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Should be one of the following: - "microchip,mcp2510" for MCP2510. - "microchip,mcp2515" for MCP2515. + - "microchip,mcp25625" for MCP25625. - reg: SPI chip select. - clocks: The clock feeding the CAN controller. - interrupts: Should contain IRQ line for the CAN controller. diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index e7db7268fd0f..4ac21cef370e 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -16,6 +16,8 @@ Required properties: Optional properties: - reset-gpios : Should be a gpio specifier for a reset line +- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to + 125MHz instead of 25MHz. See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index feb007af13cb..6f9538974bb9 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -21,10 +21,13 @@ which is at a different MDIO base address in different switch families. 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: 6190, 6190X, 6191, 6290, 6390, 6390X +- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: + 6250 Required properties: -- compatible : Should be one of "marvell,mv88e6085" or - "marvell,mv88e6190" as indicated above +- compatible : Should be one of "marvell,mv88e6085", + "marvell,mv88e6190" or "marvell,mv88e6250" as + indicated above - reg : Address on the MII bus for the switch. Optional properties: diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index 93a7469e70d4..ccbc6d89325d 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -9,6 +9,10 @@ Required properties: - #size-cells: must be 0 - #address-cells: must be 1 +Optional properties: + +- reset-gpios: GPIO to be used to reset the whole device + Subnodes: The integrated switch subnode should be specified according to the binding @@ -66,6 +70,7 @@ for the external mdio-bus configuration: #address-cells = <1>; #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; ports { @@ -123,6 +128,7 @@ for the internal master mdio-bus configuration: #address-cells = <1>; #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; ports { diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt index ed4710c40641..bbf4a13f6d75 100644 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt @@ -2,8 +2,8 @@ Vitesse VSC73xx Switches ======================== This defines device tree bindings for the Vitesse VSC73xx switch chips. -The Vitesse company has been acquired by Microsemi and Microsemi in turn -acquired by Microchip but retains this vendor branding. +The Vitesse company has been acquired by Microsemi and Microsemi has +been acquired Microchip but retains this vendor branding. The currently supported switch chips are: Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch @@ -11,8 +11,14 @@ Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch -The device tree node is an SPI device so it must reside inside a SPI bus -device tree node, see spi/spi-bus.txt +This switch could have two different management interface. + +If SPI interface is used, the device tree node is an SPI device so it must +reside inside a SPI bus device tree node, see spi/spi-bus.txt + +When the chip is connected to a parallel memory bus and work in memory-mapped +I/O mode, a platform device is used to represent the vsc73xx. In this case it +must reside inside a platform bus device tree node. Required properties: @@ -38,6 +44,7 @@ and subnodes of DSA switches. Examples: +SPI: switch@0 { compatible = "vitesse,vsc7395"; reg = <0>; @@ -79,3 +86,46 @@ switch@0 { }; }; }; + +Platform: +switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse,vsc7385"; + reg = <0x2 0x0 0x20000>; + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + +}; diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 54c66d0611cb..000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,201 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: must be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-r40-gmac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" - "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: must be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: must be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: must be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- syscon: A phandle to the device containing the EMAC or GMAC clock register - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. - Range is 0-700. Default is 0. - Unavailable for allwinner,sun8i-r40-gmac -- allwinner,rx-delay-ps: RX clock delay chain value in ps. - Range is 0-3100. Default is 0. - Range is 0-700 for allwinner,sun8i-r40-gmac -Both delay properties need to be a multiple of 100. They control the -clock delay for external RGMII PHY. They do not apply to the internal -PHY or external non-RGMII PHYs. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" must be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -The following compatibles require that the emac node have a mdio-mux child -node called "mdio-mux": - - "allwinner,sun8i-h3-emac" - - "allwinner,sun8i-v3s-emac": -Required properties for the mdio-mux node: - - compatible = "allwinner,sun8i-h3-mdio-mux" - - mdio-parent-bus: a phandle to EMAC mdio - - one child mdio for the integrated mdio with the compatible - "allwinner,sun8i-h3-mdio-internal" - - one child mdio for the external mdio if present (V3s have none) -Required properties for the mdio-mux children node: - - reg: 1 for internal MDIO bus, 2 for external MDIO bus - -The following compatibles require a PHY node representing the integrated -PHY, under the integrated MDIO bus node if an mdio-mux node is used: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": - -Additional information regarding generic multiplexer properties can be found -at Documentation/devicetree/bindings/net/mdio-mux.txt - -Required properties of the integrated phy node: -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY -- Must be a child of the integrated mdio - -Example with integrated PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - phy-is-integrated; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -Example with external PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }: - }; -}; - -Example with SoC without integrated PHY - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-a83t-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - mdio: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml new file mode 100644 index 000000000000..0e7c31794ae6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet Controller Generic Binding + +maintainers: + - David S. Miller <davem@davemloft.net> + +properties: + $nodename: + pattern: "^ethernet(@.*)?$" + + local-mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was assigned to the network device. + + mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was last used by the boot + program; should be used in cases where the MAC address assigned + to the device by the boot program is different from the + local-mac-address property. + + max-frame-size: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Maximum transfer unit (IEEE defined MTU), rather than the + maximum frame size (there\'s contradiction in the Devicetree + Specification). + + max-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Specifies maximum speed in Mbit/s supported by the device. + + nvmem-cells: + maxItems: 1 + description: + Reference to an nvmem node for the MAC address + + nvmem-cells-names: + const: mac-address + + phy-connection-type: + description: + Operation mode of the PHY interface + enum: + # There is not a standard bus between the MAC and the PHY, + # something proprietary is being used to embed the PHY in the + # MAC. + - internal + - mii + - gmii + - sgmii + - qsgmii + - tbi + - rev-mii + - rmii + + # RX and TX delays are added by the MAC when required + - rgmii + + # RGMII with internal RX and TX delays provided by the PHY, + # the MAC should not add the RX or TX delays in this case + - rgmii-id + + # RGMII with internal RX delay provided by the PHY, the MAC + # should not add an RX delay in this case + - rgmii-rxid + + # RGMII with internal TX delay provided by the PHY, the MAC + # should not add an TX delay in this case + - rgmii-txid + - rtbi + - smii + - xgmii + - trgmii + - 1000base-x + - 2500base-x + - rxaui + - xaui + + # 10GBASE-KR, XFI, SFI + - 10gbase-kr + - usxgmii + + phy-mode: + $ref: "#/properties/phy-connection-type" + + phy-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + Specifies a reference to a node representing a PHY device. + + phy: + $ref: "#/properties/phy-handle" + deprecated: true + + phy-device: + $ref: "#/properties/phy-handle" + deprecated: true + + rx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s receive fifo in bytes. This is used + for components that can have configurable receive fifo sizes, + and is useful for determining certain configuration settings + such as flow control thresholds. + + tx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s transmit fifo in bytes. This + is used for components that can have configurable fifo sizes. + + managed: + allOf: + - $ref: /schemas/types.yaml#definitions/string + - default: auto + enum: + - auto + - in-band-status + description: + Specifies the PHY management type. If auto is set and fixed-link + is not specified, it uses MDIO for management. + + fixed-link: + allOf: + - if: + type: array + then: + deprecated: true + minItems: 1 + maxItems: 1 + items: + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + + + - if: + type: object + then: + properties: + speed: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [10, 100, 1000] + description: + Link speed. + + full-duplex: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + asym-pause: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml new file mode 100644 index 000000000000..f70f18ff821f --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet PHY Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +# The dt-schema tools will generate a select statement first by using +# the compatible, and second by using the node name if any. In our +# case, the node name is the one we want to match on, while the +# compatible is optional. +select: + properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + required: + - $nodename + +properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + compatible: + oneOf: + - const: ethernet-phy-ieee802.3-c22 + description: PHYs that implement IEEE802.3 clause 22 + - const: ethernet-phy-ieee802.3-c45 + description: PHYs that implement IEEE802.3 clause 45 + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + description: + If the PHY reports an incorrect ID (or none at all) then the + compatible list may contain an entry with the correct PHY ID + in the above form. + The first group of digits is the 16 bit Phy Identifier 1 + register, this is the chip vendor OUI bits 3:18. The + second group of digits is the Phy Identifier 2 register, + this is the chip vendor OUI bits 19:24, followed by 10 + bits of a vendor specific ID. + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c45 + + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + interrupts: + maxItems: 1 + + max-speed: + enum: + - 10 + - 100 + - 1000 + - 2500 + - 5000 + - 10000 + - 20000 + - 25000 + - 40000 + - 50000 + - 56000 + - 100000 + - 200000 + description: + Maximum PHY supported speed in Mbits / seconds. + + broken-turn-around: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY device does not correctly release + the turn around line low at the end of a MDIO transaction. + + enet-phy-lane-swap: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY will swap the TX/RX lanes to + compensate for the board being designed with the lanes + swapped. + + eee-broken-100tx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000t: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gt: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000kx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkx4: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkr: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + phy-is-integrated: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers + should be configured to ensure the integrated PHY is + used. The absence of this property indicates the muxers + should be configured so that the external PHY is used. + + resets: + maxItems: 1 + + reset-names: + const: phy + + reset-gpios: + maxItems: 1 + description: + The GPIO phandle and specifier for the PHY reset signal. + + reset-assert-us: + description: + Delay after the reset was asserted in microseconds. If this + property is missing the delay will be skipped. + + reset-deassert-us: + description: + Delay after the reset was deasserted in microseconds. If + this property is missing the delay will be skipped. + +required: + - reg + +examples: + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&PIC>; + interrupts = <35 1>; + reg = <0>; + + resets = <&rst 8>; + reset-names = "phy"; + reset-gpios = <&gpio1 4 1>; + reset-assert-us = <1000>; + reset-deassert-us = <2000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index e88c3641d613..5df413d01be2 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -1,67 +1 @@ -The following properties are common to the Ethernet controllers: - -NOTE: All 'phy*' properties documented below are Ethernet specific. For the -generic PHY 'phys' property, see -Documentation/devicetree/bindings/phy/phy-bindings.txt. - -- mac-address: array of 6 bytes, specifies the MAC address that was last used by - the boot program; should be used in cases where the MAC address assigned to - the device by the boot program is different from the "local-mac-address" - property; -- local-mac-address: array of 6 bytes, specifies the MAC address that was - assigned to the network device; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used -- max-speed: number, specifies maximum speed in Mbit/s supported by the device; -- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in the Devicetree - Specification). -- phy-mode: string, operation mode of the PHY interface. This is now a de-facto - standard property; supported values are: - * "internal" (Internal means there is not a standard bus between the MAC and - the PHY, something proprietary is being used to embed the PHY in the MAC.) - * "mii" - * "gmii" - * "sgmii" - * "qsgmii" - * "tbi" - * "rev-mii" - * "rmii" - * "rgmii" (RX and TX delays are added by the MAC when required) - * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the - MAC should not add the RX or TX delays in this case) - * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC - should not add an RX delay in this case) - * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC - should not add an TX delay in this case) - * "rtbi" - * "smii" - * "xgmii" - * "trgmii" - * "1000base-x", - * "2500base-x", - * "rxaui" - * "xaui" - * "10gbase-kr" (10GBASE-KR, XFI, SFI) -- phy-connection-type: the same as "phy-mode" property but described in the - Devicetree Specification; -- phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in the Devicetree Specification and so - preferred; -- phy: the same as "phy-handle" property, not recommended for new bindings. -- phy-device: the same as "phy-handle" property, not recommended for new - bindings. -- rx-fifo-depth: the size of the controller's receive fifo in bytes. This - is used for components that can have configurable receive fifo sizes, - and is useful for determining certain configuration settings such as - flow control thresholds. -- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This - is used for components that can have configurable fifo sizes. -- managed: string, specifies the PHY management type. Supported values are: - "auto", "in-band-status". "auto" is the default, it usess MDIO for - management if fixed-link is not specified. - -Child nodes of the Ethernet controller are typically the individual PHY devices -connected via the MDIO bus (sometimes the MDIO bus controller is separate). -They are described in the phy.txt file in this same directory. -For non-MDIO PHY management see fixed-link.txt. +This file has moved to ethernet-controller.yaml. diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt index ec5d889fe3d8..5df413d01be2 100644 --- a/Documentation/devicetree/bindings/net/fixed-link.txt +++ b/Documentation/devicetree/bindings/net/fixed-link.txt @@ -1,54 +1 @@ -Fixed link Device Tree binding ------------------------------- - -Some Ethernet MACs have a "fixed link", and are not connected to a -normal MDIO-managed PHY device. For those situations, a Device Tree -binding allows to describe a "fixed link". - -Such a fixed link situation is described by creating a 'fixed-link' -sub-node of the Ethernet MAC device node, with the following -properties: - -* 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -* 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. -* 'pause' (boolean, optional), to indicate that pause should be - enabled. -* 'asym-pause' (boolean, optional), to indicate that asym_pause should - be enabled. -* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read - to determine if the link is up. - -Old, deprecated 'fixed-link' binding: - -* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the - form <a b c d e> with the following accepted values: - - a: emulated PHY ID, choose any but but unique to the all specified - fixed-links, from 0 to 31 - - b: duplex configuration: 0 for half duplex, 1 for full duplex - - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000 - - d: pause configuration: 0 for no pause, 1 for pause - - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for - asymmetric pause - -Examples: - -ethernet@0 { - ... - fixed-link { - speed = <1000>; - full-duplex; - }; - ... -}; - -ethernet@1 { - ... - fixed-link { - speed = <1000>; - pause; - link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - ... -}; +This file has moved to ethernet-controller.yaml. diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt index c812e25ae90f..25fc687419db 100644 --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt @@ -16,8 +16,8 @@ Required properties: In this case, the ENETC node should include a "mdio" sub-node that in turn should contain the "ethernet-phy" node describing the external phy. Below properties are required, their bindings -already defined in ethernet.txt or phy.txt, under -Documentation/devicetree/bindings/net/*. +already defined in Documentation/devicetree/bindings/net/ethernet.txt or +Documentation/devicetree/bindings/net/phy.txt. Required: @@ -51,8 +51,7 @@ Example: connection: In this case, the ENETC port node defines a fixed link connection, -as specified by "fixed-link.txt", under -Documentation/devicetree/bindings/net/*. +as specified by Documentation/devicetree/bindings/net/fixed-link.txt. Required: diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt index d1df8a00e1f3..464c0dafc617 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -10,6 +10,7 @@ Required properties: phandle, specifies a reference to the syscon ppe node port, port number connected to the controller channel, recv channel start from channel * number (RX_DESC_NUM) + group, field in the pkg desc, in general, it is the same as the port. - phy-mode: see ethernet.txt [1]. Optional properties: @@ -66,7 +67,7 @@ Example: reg = <0x28b0000 0x10000>; interrupts = <0 413 4>; phy-mode = "mii"; - port-handle = <&ppe 31 0>; + port-handle = <&ppe 31 0 31>; }; ge0: ethernet@2800000 { @@ -74,7 +75,7 @@ Example: reg = <0x2800000 0x10000>; interrupts = <0 402 4>; phy-mode = "sgmii"; - port-handle = <&ppe 0 1>; + port-handle = <&ppe 0 1 0>; phy-handle = <&phy0>; }; @@ -83,6 +84,6 @@ Example: reg = <0x2880000 0x10000>; interrupts = <0 410 4>; phy-mode = "sgmii"; - port-handle = <&ppe 8 2>; + port-handle = <&ppe 8 2 8>; phy-handle = <&phy1>; }; diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt index 6262c2f293b0..24f11e042f8d 100644 --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt @@ -104,6 +104,23 @@ Required properties: - 10Gb mac<->mac forced mode : 11 ----phy-handle: phandle to PHY device +- cpts: sub-node time synchronization (CPTS) submodule configuration +-- clocks: CPTS reference clock. Should point on cpts-refclk-mux clock. +-- clock-names: should be "cpts" +-- cpts-refclk-mux: multiplexer clock definition sub-node for CPTS reference (RFTCLK) clock +--- #clock-cells: should be 0 +--- clocks: list of CPTS reference (RFTCLK) clock's parents as defined in Data manual +--- ti,mux-tbl: array of multiplexer indexes as defined in Data manual +--- assigned-clocks: should point on cpts-refclk-mux clock +--- assigned-clock-parents: should point on required RFTCLK clock parent to be selected +-- cpts_clock_mult: (optional) Numerator to convert input clock ticks + into nanoseconds +-- cpts_clock_shift: (optional) Denominator to convert input clock ticks into + nanoseconds. + Mult and shift will be calculated basing on CPTS + rftclk frequency if both cpts_clock_shift and + cpts_clock_mult properties are not provided. + Optional properties: - enable-ale: NetCP driver keeps the address learning feature in the ethernet switch module disabled. This attribute is to enable the address @@ -168,6 +185,23 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = <8>; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsipclka>, <&tsrefclk>, + <&tsipclkb>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x4>, <0x8>, <0xC>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; @@ -219,3 +253,13 @@ netcp: netcp@2000000 { }; }; }; + +CPTS board configuration - select external CPTS RFTCLK: + +&tsrefclk{ + clock-frequency = <500000000>; +}; + +&cpts_refclk_mux { + assigned-clock-parents = <&tsrefclk>; +}; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 9c5e94482b5f..63c73fafe26d 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -15,8 +15,11 @@ Required properties: Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. + Use "sifive,fu540-macb" for SiFive FU540-C000 SoC. Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device + For "sifive,fu540-macb", second range is required to specify the + address and length of the registers for GEMGXL Management block. - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. - clock-names: Tuple listing input clock names. diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt b/Documentation/devicetree/bindings/net/marvell-bluetooth.txt new file mode 100644 index 000000000000..0e2842296032 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.txt @@ -0,0 +1,25 @@ +Marvell Bluetooth Chips +----------------------- + +This documents the binding structure and common properties for serial +attached Marvell Bluetooth devices. The following chips are included in +this binding: + +* Marvell 88W8897 Bluetooth devices + +Required properties: + - compatible: should be: + "mrvl,88w8897" + +Optional properties: +None so far + +Example: + +&serial0 { + compatible = "ns16550a"; + ... + bluetooth { + compatible = "mrvl,88w8897"; + }; +}; diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt index 42cd81090a2c..3f3cfc1d8d4d 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt @@ -16,7 +16,7 @@ Required properties: Optional properties: - interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to three required clocks for the MDIO instance +- clocks: phandle for up to four required clocks for the MDIO instance The child nodes of the MDIO driver are the individual PHY devices connected to this MDIO bus. They must have a "reg" property given the diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index e3e1603f256c..cf8a0105488e 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -1,37 +1 @@ -Common MDIO bus properties. - -These are generic properties that can apply to any MDIO bus. - -Optional properties: -- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO - bus. -- reset-delay-us: RESET pulse width in microseconds. - -A list of child nodes, one per device on the bus is expected. These -should follow the generic phy.txt, or a device specific binding document. - -The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and -applies to all PHY devices. It must therefore be appropriately determined based -on all PHY requirements (maximum value of all per-PHY RESET pulse widths). - -Example : -This example shows these optional properties, plus other properties -required for the TI Davinci MDIO driver. - - davinci_mdio: ethernet@5c030000 { - compatible = "ti,davinci_mdio"; - reg = <0x5c030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - ethphy0: ethernet-phy@1 { - reg = <1>; - }; - - ethphy1: ethernet-phy@3 { - reg = <3>; - }; - }; +This file has moved to mdio.yaml. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml new file mode 100644 index 000000000000..5d08d2ffd4eb --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO Bus Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + These are generic properties that can apply to any MDIO bus. Any + MDIO bus must have a list of child nodes, one per device on the + bus. These should follow the generic ethernet-phy.yaml document, or + a device specific binding document. + +properties: + $nodename: + pattern: "^mdio(@.*)?" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET + lines of all PHYs on that MDIO bus. + + reset-delay-us: + description: + RESET pulse width in microseconds. It applies to all PHY devices + and must therefore be appropriately determined based on all PHY + requirements (maximum value of all per-PHY RESET pulse widths). + +patternProperties: + "^ethernet-phy@[0-9a-f]+$": + type: object + + properties: + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + required: + - reg + +examples: + - | + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + reg = <0x5c030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio2 5 1>; + reset-delay-us = <2>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 41a7dcc80f5b..112011c51d5e 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -50,16 +50,33 @@ Required properties: "mediatek,mt7663u-bluetooth": for MT7663U device "mediatek,mt7668u-bluetooth": for MT7668U device - vcc-supply: Main voltage regulator + +If the pin controller on the platform can support both pinmux and GPIO +control such as the most of MediaTek platform. Please use below properties. + - pinctrl-names: Should be "default", "runtime" - pinctrl-0: Should contain UART RXD low when the device is powered up to enter proper bootstrap mode. - pinctrl-1: Should contain UART mode pin ctrl +Else, the pin controller on the platform only can support pinmux control and +the GPIO control still has to rely on the dedicated GPIO controller such as +a legacy MediaTek SoC, MT7621. Please use the below properties. + +- boot-gpios: GPIO same to the pin as UART RXD and used to keep LOW when + the device is powered up to enter proper bootstrap mode when +- pinctrl-names: Should be "default" +- pinctrl-0: Should contain UART mode pin ctrl + Optional properties: - reset-gpios: GPIO used to reset the device whose initial state keeps low, if the GPIO is missing, then board-level design should be guaranteed. +- clocks: Should be the clock specifiers corresponding to the entry in + clock-names property. If the clock is missing, then board-level + design should be guaranteed. +- clock-names: Should contain "osc" entry for the external oscillator. - current-speed: Current baud rate of the device whose defaults to 921600 Example: diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 503f2b9194e2..770ff98d4524 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt2701-eth": for MT2701 SoC "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC "mediatek,mt7622-eth": for MT7622 SoC + "mediatek,mt7629-eth": for MT7629 SoC - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. @@ -19,14 +20,23 @@ Required properties: "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC + "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", + "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", + "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", + "eth2pll" : For MT7629 SoC. - power-domains: phandle to the power domain that the ethernet is part of - resets: Should contain phandles to the ethsys reset signals - reset-names: Should contain the names of reset signal listed in the resets property These are "fe", "gmac" and "ppe" - mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup - which is required for those SoCs equipped with SGMII such as MT7622 SoC. +- mediatek,infracfg: phandle to the syscon node that handles the path from + GMAC to PHY variants, which is required for MT7629 SoC. +- mediatek,sgmiisys: a list of phandles to the syscon node that handles the + SGMII setup which is required for those SoCs equipped with SGMII such + as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared + by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed + to GMAC1 and GMAC2, respectively. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current: only for MT2701 and MT7623 SoC diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 9b9e5b1765dd..2399ee60caed 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -1,79 +1 @@ -PHY nodes - -Required properties: - - - interrupts : interrupt specifier for the sole interrupt. - - reg : The ID number for the phy, usually a small integer - -Optional Properties: - -- compatible: Compatible list, may contain - "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for - PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 - specifications. If neither of these are specified, the default is to - assume clause 22. - - If the PHY reports an incorrect ID (or none at all) then the - "compatible" list may contain an entry with the correct PHY ID in the - form: "ethernet-phy-idAAAA.BBBB" where - AAAA - The value of the 16 bit Phy Identifier 1 register as - 4 hex digits. This is the chip vendor OUI bits 3:18 - BBBB - The value of the 16 bit Phy Identifier 2 register as - 4 hex digits. This is the chip vendor OUI bits 19:24, - followed by 10 bits of a vendor specific ID. - - The compatible list should not contain other values than those - listed here. - -- max-speed: Maximum PHY supported speed (10, 100, 1000...) - -- broken-turn-around: If set, indicates the PHY device does not correctly - release the turn around line low at the end of a MDIO transaction. - -- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to - compensate for the board being designed with the lanes swapped. - -- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong - bootstrap configuration caused by issues in PCB layout design. - -- eee-broken-100tx: -- eee-broken-1000t: -- eee-broken-10gt: -- eee-broken-1000kx: -- eee-broken-10gkx4: -- eee-broken-10gkr: - Mark the corresponding energy efficient ethernet mode as broken and - request the ethernet to stop advertising it. - -- phy-is-integrated: If set, indicates that the PHY is integrated into the same - physical package as the Ethernet MAC. If needed, muxers should be configured - to ensure the integrated PHY is used. The absence of this property indicates - the muxers should be configured so that the external PHY is used. - -- resets: The reset-controller phandle and specifier for the PHY reset signal. - -- reset-names: Must be "phy" for the PHY reset signal. - -- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. - -- reset-assert-us: Delay after the reset was asserted in microseconds. - If this property is missing the delay will be skipped. - -- reset-deassert-us: Delay after the reset was deasserted in microseconds. - If this property is missing the delay will be skipped. - -Example: - -ethernet-phy@0 { - compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <&PIC>; - interrupts = <35 IRQ_TYPE_EDGE_RISING>; - reg = <0>; - - resets = <&rst 8>; - reset-names = "phy"; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - reset-assert-us = <1000>; - reset-deassert-us = <2000>; -}; +This file has moved to ethernet-phy.yaml. diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.txt b/Documentation/devicetree/bindings/net/qca,ar71xx.txt new file mode 100644 index 000000000000..2a33e71ba72b --- /dev/null +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.txt @@ -0,0 +1,45 @@ +Required properties: +- compatible: Should be "qca,<soc>-eth". Currently support compatibles are: + qca,ar7100-eth - Atheros AR7100 + qca,ar7240-eth - Atheros AR7240 + qca,ar7241-eth - Atheros AR7241 + qca,ar7242-eth - Atheros AR7242 + qca,ar9130-eth - Atheros AR9130 + qca,ar9330-eth - Atheros AR9330 + qca,ar9340-eth - Atheros AR9340 + qca,qca9530-eth - Qualcomm Atheros QCA9530 + qca,qca9550-eth - Qualcomm Atheros QCA9550 + qca,qca9560-eth - Qualcomm Atheros QCA9560 + +- reg : Address and length of the register set for the device +- interrupts : Should contain eth interrupt +- phy-mode : See ethernet.txt file in the same directory +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property. These are + "eth" and "mdio". +- resets: Should contain phandles to the reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property. These are "mac" and "mdio" + +Optional properties: +- phy-handle : phandle to the PHY device connected to this device. +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. + +Optional subnodes: +- mdio : specifies the mdio bus, used as a container for phy nodes + according to phy.txt in the same directory + +Example: + +ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; +}; diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt index 7ef6118abd3d..68b67d9db63a 100644 --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -17,6 +17,7 @@ Optional properties for compatible string qcom,qca6174-bt: - enable-gpios: gpio specifier used to enable chip - clocks: clock provided to the controller (SUSCLK_32KHZ) + - firmware-name: specify the name of nvm firmware to load Required properties for compatible string qcom,wcn399x-bt: @@ -28,6 +29,7 @@ Required properties for compatible string qcom,wcn399x-bt: Optional properties for compatible string qcom,wcn399x-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - firmware-name: specify the name of nvm firmware to load Examples: @@ -40,6 +42,7 @@ serial@7570000 { enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; }; }; @@ -52,5 +55,6 @@ serial@898000 { vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; max-speed = <3200000>; + firmware-name = "crnv21.bin"; }; }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml new file mode 100644 index 000000000000..76fea2be66ac --- /dev/null +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -0,0 +1,411 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/snps,dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MAC Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Giuseppe Cavallaro <peppe.cavallaro@st.com> + - Jose Abreu <joabreu@synopsys.com> + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + contains: + enum: + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + # Deprecated + - st,spear600-gmac + + required: + - compatible + +properties: + + # We need to include all the compatibles from schemas that will + # include that schemas, otherwise compatible won't validate for + # those. + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + items: + - description: Combined signal for various interrupt events + - description: The interrupt to manage the remote wake-up packet detection + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + - const: macirq + - const: eth_wake_irq + - const: eth_lpi + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: GMAC main clock + - description: Peripheral registers interface clock + - description: + PTP reference clock. This clock is used for programming the + Timestamp Addend Register. If not passed then the system + clock will be used and this is fine on some platforms. + + clock-names: + additionalItems: true + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + + resets: + maxItems: 1 + description: + MAC Reset signal. + + reset-names: + const: stmmaceth + + snps,axi-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + AXI BUS Mode parameters. Phandle to a node that can contain the + following properties + * snps,lpi_en, enable Low Power Interface + * snps,xit_frm, unlock on WoL + * snps,wr_osr_lmt, max write outstanding req. limit + * snps,rd_osr_lmt, max read outstanding req. limit + * snps,kbbe, do not cross 1KiB boundary. + * snps,blen, this is a vector of supported burst length. + * snps,fb, fixed-burst + * snps,mb, mixed-burst + * snps,rb, rebuild INCRx Burst + + snps,mtl-rx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple RX Queues parameters. Phandle to a node that can + contain the following properties + * snps,rx-queues-to-use, number of RX queues to be used in the + driver + * Choose one of these RX scheduling algorithms + * snps,rx-sched-sp, Strict priority + * snps,rx-sched-wsp, Weighted Strict priority + * For each RX queue + * Choose one of these modes + * snps,dcb-algorithm, Queue to be enabled as DCB + * snps,avb-algorithm, Queue to be enabled as AVB + * snps,map-to-dma-channel, Channel to map + * Specifiy specific packet routing + * snps,route-avcp, AV Untagged Control packets + * snps,route-ptp, PTP Packets + * snps,route-dcbcp, DCB Control Packets + * snps,route-up, Untagged Packets + * snps,route-multi-broad, Multicast & Broadcast Packets + * snps,priority, RX queue priority (Range 0x0 to 0xF) + + snps,mtl-tx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple TX Queues parameters. Phandle to a node that can + contain the following properties + * snps,tx-queues-to-use, number of TX queues to be used in the + driver + * Choose one of these TX scheduling algorithms + * snps,tx-sched-wrr, Weighted Round Robin + * snps,tx-sched-wfq, Weighted Fair Queuing + * snps,tx-sched-dwrr, Deficit Weighted Round Robin + * snps,tx-sched-sp, Strict priority + * For each TX queue + * snps,weight, TX queue weight (if using a DCB weight + algorithm) + * Choose one of these modes + * snps,dcb-algorithm, TX queue will be working in DCB + * snps,avb-algorithm, TX queue will be working in AVB + [Attention] Queue 0 is reserved for legacy traffic + and so no AVB is available in this queue. + * Configure Credit Base Shaper (if AVB Mode selected) + * snps,send_slope, enable Low Power Interface + * snps,idle_slope, unlock on WoL + * snps,high_credit, max write outstanding req. limit + * snps,low_credit, max read outstanding req. limit + * snps,priority, TX queue priority (Range 0x0 to 0xF) + + snps,reset-gpio: + deprecated: true + maxItems: 1 + description: + PHY Reset GPIO + + snps,reset-active-low: + deprecated: true + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that the PHY Reset is active low + + snps,reset-delays-us: + deprecated: true + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 3 + maxItems: 3 + description: + Triplet of delays. The 1st cell is reset pre-delay in micro + seconds. The 2nd cell is reset pulse in micro seconds. The 3rd + cell is reset post-delay in micro seconds. + + snps,aal: + $ref: /schemas/types.yaml#definitions/flag + description: + Use Address-Aligned Beats + + snps,fixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the fixed burst mode + + snps,mixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the mixed burst mode + + snps,force_thresh_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the threshold mode for both tx and rx + + snps,force_sf_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the Store and Forward mode for both tx and + rx. This flag is ignored if force_thresh_dma_mode is set. + + snps,en-tx-lpi-clockgating: + $ref: /schemas/types.yaml#definitions/flag + description: + Enable gating of the MAC TX clock during TX low-power mode + + snps,multicast-filter-bins: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of multicast filter hash bins supported by this device + instance + + snps,perfect-filter-entries: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of perfect filter entries supported by this device + instance + + snps,ps-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Port selection speed that can be passed to the core when PCS + is supported. For example, this is used in case of SGMII and + MAC2MAC connection. + + mdio: + type: object + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: snps,dwmac-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phy-mode + +dependencies: + snps,reset-active-low: ["snps,reset-gpio"] + snps,reset-delay-us: ["snps,reset-gpio"] + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + properties: + snps,pbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Programmable Burst Length (tx and rx) + + snps,txpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + + snps,rxpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + snps,tso: + $ref: /schemas/types.yaml#definitions/flag + description: + Enables the TSO feature otherwise it will be managed by + MAC HW capability register. + +examples: + - | + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@e0800000 { + compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23 22>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + max-frame-size = <3800>; + phy-mode = "gmii"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <16384>; + clocks = <&clock>; + clock-names = "stmmaceth"; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 17d6819669c8..612a8e8abc88 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -6,11 +6,17 @@ present in Documentation/devicetree/bindings/net/stmmac.txt. The device node has additional properties: Required properties: - - compatible : Should contain "altr,socfpga-stmmac" along with - "snps,dwmac" and any applicable more detailed + - compatible : For Cyclone5/Arria5 SoCs it should contain + "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs + "altr,socfpga-stmmac-a10-s10". + Along with "snps,dwmac" and any applicable more detailed designware version numbers documented in stmmac.txt - altr,sysmgr-syscon : Should be the phandle to the system manager node that encompasses the glue register, the register offset, and the register shift. + On Cyclone5/Arria5, the register shift represents the PHY mode bits, while + on the Arria10/Stratix10/Agilex platforms, the register shift represents + bit for each emac to enable/disable signals from the FPGA fabric to the + EMAC modules. - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock for ptp ref clk. This affects all emacs as the clock is common. diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index cb694062afff..7d48782767cb 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -1,178 +1 @@ -* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC) - -Required properties: -- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or - "snps,dwxgmac-<ip_version>", "snps,dwxgmac". - For backwards compatibility: "st,spear600-gmac" is also supported. -- reg: Address and length of the register set for the device -- interrupts: Should contain the STMMAC interrupts -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Valid interrupt names are: - - "macirq" (combined signal for various interrupt events) - - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) -- phy-mode: See ethernet.txt file in the same directory. -- snps,reset-gpio gpio number for phy reset. -- snps,reset-active-low boolean flag to indicate if phy reset is active low. -- snps,reset-delays-us is triplet of delays - The 1st cell is reset pre-delay in micro seconds. - The 2nd cell is reset pulse in micro seconds. - The 3rd cell is reset post-delay in micro seconds. - -Optional properties: -- resets: Should contain a phandle to the STMMAC reset signal, if any -- reset-names: Should contain the reset signal name "stmmaceth", if a - reset phandle is given -- max-frame-size: See ethernet.txt file in the same directory -- clocks: If present, the first clock should be the GMAC main clock and - the second clock should be peripheral's register interface clock. Further - clocks may be specified in derived bindings. -- clock-names: One name for each entry in the clocks property, the - first one should be "stmmaceth" and the second one should be "pclk". -- ptp_ref: this is the PTP reference clock; in case of the PTP is available - this clock is used for programming the Timestamp Addend Register. If not - passed then the system clock will be used and this is fine on some - platforms. -- tx-fifo-depth: See ethernet.txt file in the same directory -- rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length (tx and rx) -- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. - If set, DMA tx will use this value rather than snps,pbl. -- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. - If set, DMA rx will use this value rather than snps,pbl. -- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8. - For core rev < 3.50, don't multiply the values by 4. -- snps,aal Address-Aligned Beats -- snps,fixed-burst Program the DMA to use the fixed burst mode -- snps,mixed-burst Program the DMA to use the mixed burst mode -- snps,force_thresh_dma_mode Force DMA to use the threshold mode for - both tx and rx -- snps,force_sf_dma_mode Force DMA to use the Store and Forward - mode for both tx and rx. This flag is - ignored if force_thresh_dma_mode is set. -- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during - TX low-power mode -- snps,multicast-filter-bins: Number of multicast filter hash bins - supported by this device instance -- snps,perfect-filter-entries: Number of perfect filter entries supported - by this device instance -- snps,ps-speed: port selection speed that can be passed to the core when - PCS is supported. For example, this is used in case of SGMII - and MAC2MAC connection. -- snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. Only for GMAC4 and newer. -- AXI BUS Mode parameters: below the list of all the parameters to program the - AXI register inside the DMA module: - - snps,lpi_en: enable Low Power Interface - - snps,xit_frm: unlock on WoL - - snps,wr_osr_lmt: max write outstanding req. limit - - snps,rd_osr_lmt: max read outstanding req. limit - - snps,kbbe: do not cross 1KiB boundary. - - snps,blen: this is a vector of supported burst length. - - snps,fb: fixed-burst - - snps,mb: mixed-burst - - snps,rb: rebuild INCRx Burst -- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. -- Multiple RX Queues parameters: below the list of all the parameters to - configure the multiple RX queues: - - snps,rx-queues-to-use: number of RX queues to be used in the driver - - Choose one of these RX scheduling algorithms: - - snps,rx-sched-sp: Strict priority - - snps,rx-sched-wsp: Weighted Strict priority - - For each RX queue - - Choose one of these modes: - - snps,dcb-algorithm: Queue to be enabled as DCB - - snps,avb-algorithm: Queue to be enabled as AVB - - snps,map-to-dma-channel: Channel to map - - Specifiy specific packet routing: - - snps,route-avcp: AV Untagged Control packets - - snps,route-ptp: PTP Packets - - snps,route-dcbcp: DCB Control Packets - - snps,route-up: Untagged Packets - - snps,route-multi-broad: Multicast & Broadcast Packets - - snps,priority: RX queue priority (Range: 0x0 to 0xF) -- Multiple TX Queues parameters: below the list of all the parameters to - configure the multiple TX queues: - - snps,tx-queues-to-use: number of TX queues to be used in the driver - - Choose one of these TX scheduling algorithms: - - snps,tx-sched-wrr: Weighted Round Robin - - snps,tx-sched-wfq: Weighted Fair Queuing - - snps,tx-sched-dwrr: Deficit Weighted Round Robin - - snps,tx-sched-sp: Strict priority - - For each TX queue - - snps,weight: TX queue weight (if using a DCB weight algorithm) - - Choose one of these modes: - - snps,dcb-algorithm: TX queue will be working in DCB - - snps,avb-algorithm: TX queue will be working in AVB - [Attention] Queue 0 is reserved for legacy traffic - and so no AVB is available in this queue. - - Configure Credit Base Shaper (if AVB Mode selected): - - snps,send_slope: enable Low Power Interface - - snps,idle_slope: unlock on WoL - - snps,high_credit: max write outstanding req. limit - - snps,low_credit: max read outstanding req. limit - - snps,priority: TX queue priority (Range: 0x0 to 0xF) -Examples: - - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <0xf>; - snps,rd_osr_lmt = <0xf>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,priority = <0x0>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - snps,tx-sched-wrr; - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - - queue1 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3E800>; - snps,low_credit = <0xFFC18000>; - snps,priority = <0x1>; - }; - }; - - gmac0: ethernet@e0800000 { - compatible = "st,spear600-gmac"; - reg = <0xe0800000 0x8000>; - interrupt-parent = <&vic1>; - interrupts = <24 23 22>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - max-frame-size = <3800>; - phy-mode = "gmii"; - snps,multicast-filter-bins = <256>; - snps,perfect-filter-entries = <128>; - rx-fifo-depth = <16384>; - tx-fifo-depth = <16384>; - clocks = <&clock>; - clock-names = "stmmaceth"; - snps,axi-config = <&stmmac_axi_setup>; - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: ethernet-phy@0 { - }; - }; - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - }; +This file has moved to snps,dwmac.yaml. diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 9ef9338aaee1..db6aa3f2215b 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -11,6 +11,14 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays + will be left at their default values, as set by the PHY's pin strapping. + The default strapping will use a delay of 2.00 ns. Thus + PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no + internal delay, but as PHY_INTERFACE_MODE_RGMII_ID. The device tree + should use "rgmii-id" if internal delays are desired as this may be + changed in future to cause "rgmii" mode to disable delays. + Optional property: - ti,min-output-impedance - MAC Interface Impedance control to set the programmable output impedance to @@ -25,8 +33,10 @@ Optional property: software needs to take when this pin is strapped in these modes. See data manual for details. - - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h - for applicable values. + - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h + for applicable values. The CLK_OUT pin can also + be disabled by this property. When omitted, the + PHY's default will be left as is. Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance diff --git a/Documentation/devicetree/bindings/net/wiznet,w5x00.txt b/Documentation/devicetree/bindings/net/wiznet,w5x00.txt new file mode 100644 index 000000000000..e9665798c4be --- /dev/null +++ b/Documentation/devicetree/bindings/net/wiznet,w5x00.txt @@ -0,0 +1,50 @@ +* Wiznet w5x00 + +This is a standalone 10/100 MBit Ethernet controller with SPI interface. + +For each device connected to a SPI bus, define a child node within +the SPI master node. + +Required properties: +- compatible: Should be one of the following strings: + "wiznet,w5100" + "wiznet,w5200" + "wiznet,w5500" +- reg: Specify the SPI chip select the chip is wired to. +- interrupts: Specify the interrupt index within the interrupt controller (referred + to above in interrupt-parent) and interrupt type. w5x00 natively + generates falling edge interrupts, however, additional board logic + might invert the signal. +- pinctrl-names: List of assigned state names, see pinctrl binding documentation. +- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line, + see also generic and your platform specific pinctrl binding + documentation. + +Optional properties: +- spi-max-frequency: Maximum frequency of the SPI bus when accessing the w5500. + According to the w5500 datasheet, the chip allows a maximum of 80 MHz, however, + board designs may need to limit this value. +- local-mac-address: See ethernet.txt in the same directory. + + +Example (for Raspberry Pi with pin control stuff for GPIO irq): + +&spi { + ethernet@0: w5500@0 { + compatible = "wiznet,w5500"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <ð1_pins>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <30000000>; + }; +}; + +&gpio { + eth1_pins: eth1_pins { + brcm,pins = <25>; + brcm,function = <0>; /* in */ + brcm,pull = <0>; /* none */ + }; +}; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 38f9ec076743..7360617cdedb 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -17,8 +17,15 @@ For more details about mdio please refer phy.txt file in the same directory. Required properties: - compatible : Must be one of "xlnx,axi-ethernet-1.00.a", "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space. -- interrupts : Should be a list of two interrupt, TX and RX. +- reg : Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. +- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, + and optionally Ethernet core. If axistream-connected is + specified, the TX/RX DMA interrupts should be on that node + instead, and only the Ethernet core interrupt is optionally + specified here. - phy-handle : Should point to the external phy device. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -31,15 +38,29 @@ Optional properties: 1 to enable partial TX checksum offload, 2 to enable full TX checksum offload - xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload +- clocks : AXI bus clock for the device. Refer to common clock bindings. + Used to calculate MDIO clock divisor. If not specified, it is + auto-detected from the CPU clock (but only on platforms where + this is possible). New device trees should specify this - the + auto detection is only for backward compatibility. +- axistream-connected: Reference to another node which contains the resources + for the AXI DMA controller used by this device. + If this is specified, the DMA-related resources from that + device (DMA registers and DMA TX/RX interrupts) rather + than this one will be used. + - mdio : Child node for MDIO bus. Must be defined if PHY access is + required through the core's MDIO interface (i.e. always, + unless the PHY is accessed through a different bus). Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; device_type = "network"; interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0>; + interrupts = <2 0 1>; + clocks = <&axi_clk>; phy-mode = "mii"; - reg = <0x40c00000 0x40000>; + reg = <0x40c00000 0x40000 0x50c00000 0x40000>; xlnx,rxcsum = <0x2>; xlnx,rxmem = <0x800>; xlnx,txcsum = <0x2>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml new file mode 100644 index 000000000000..c9efd6e2c134 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Security ID Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - allwinner,sun4i-a10-sid + - allwinner,sun7i-a20-sid + - allwinner,sun8i-a83t-sid + - allwinner,sun8i-h3-sid + - allwinner,sun50i-a64-sid + - allwinner,sun50i-h5-sid + - allwinner,sun50i-h6-sid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + sid@1c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + - | + sid@1c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt deleted file mode 100644 index cfb18b4ef8f7..000000000000 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ /dev/null @@ -1,29 +0,0 @@ -Allwinner sunxi-sid - -Required properties: -- compatible: Should be one of the following: - "allwinner,sun4i-a10-sid" - "allwinner,sun7i-a20-sid" - "allwinner,sun8i-a83t-sid" - "allwinner,sun8i-h3-sid" - "allwinner,sun50i-a64-sid" - "allwinner,sun50i-h5-sid" - "allwinner,sun50i-h6-sid" - -- reg: Should contain registers location and length - -= Data cells = -Are child nodes of sunxi-sid, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example for sun4i: - sid@1c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10> - }; - -Example for sun7i: - sid@1c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200> - }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 68f7d6fdd140..96ffd06d2ca8 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -15,6 +15,7 @@ Required properties: "fsl,imx6sll-ocotp" (i.MX6SLL), "fsl,imx7ulp-ocotp" (i.MX7ULP), "fsl,imx8mq-ocotp" (i.MX8MQ), + "fsl,imx8mm-ocotp" (i.MX8MM), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt index b9165b72473c..3abeecf4983f 100644 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -9,7 +9,6 @@ Freescale 83xx and 512x SOCs include the same PCI bridge core. Example (MPC8313ERDB) pci0: pci@e0008500 { - cell-index = <1>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt index 12b18f82d441..efa2c8b9b85a 100644 --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt new file mode 100644 index 000000000000..d77e3f26f9e6 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt @@ -0,0 +1,21 @@ +* Freescale(NXP) IMX8 DDR performance monitor + +Required properties: + +- compatible: should be one of: + "fsl,imx8-ddr-pmu" + "fsl,imx8m-ddr-pmu" + +- reg: physical address and size + +- interrupts: single interrupt + generated by the control block + +Example: + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000000..9b23407233c0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "fsl,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30a00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 6ac98b3b5f57..c9f5c0caf8a9 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -7,6 +7,7 @@ Required properties: * "fsl,imx6sl-usbphy" for imx6sl * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt @@ -23,7 +24,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@20c9000 { +usbphy1: usb-phy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index daedb15f322e..9fb682e47c29 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -42,6 +42,18 @@ Required properties: - reset-names: Must include the following entries: - "padctl" +For Tegra124: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. + +For Tegra210: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + For Tegra186: - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY power supply. Must supply 1.8 V. diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt new file mode 100644 index 000000000000..93fc09c12954 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt @@ -0,0 +1,18 @@ +Marvell PXA USB PHY +------------------- + +Required properties: +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", + "marvell,pxa168-usb-phy", +- #phy-cells: must be 0 + +Example: + usb-phy: usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "okay"; + }; + +This document explains the device tree binding. For general +information about PHY subsystem refer to Documentation/phy.txt diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 000000000000..30064253f290 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,42 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + - #clock-cells: must be 0 + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index d46188f450bf..503a8cfb3184 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -1,10 +1,12 @@ * Renesas R-Car generation 3 USB 2.0 PHY This file provides information on what the device node for the R-Car generation -3, RZ/G1C and RZ/G2 USB 2.0 PHY contain. +3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. Required properties: -- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 +- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 + SoC. + "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 SoC. "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 SoC. @@ -20,8 +22,8 @@ Required properties: R8A77990 SoC. "renesas,usb2-phy-r8a77995" if the device is a part of an R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 or RZ/G2 - compatible device. + "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or + RZ/A2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first @@ -46,6 +48,9 @@ channel as USB OTG: regulator will be managed during the PHY power on/off sequence. - renesas,no-otg-pins: boolean, specify when a board does not provide proper otg pins. +- dr_mode: string, indicates the working mode for the PHY. Can be "host", + "peripheral", or "otg". Should be set if otg controller is not used. + Example (R-Car H3): diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt index 83f4bbac94bb..a1264cc8660d 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt @@ -213,4 +213,4 @@ pinctrl: pinctrl@f0800000 { groups = "clkreq"; function = "clkreq"; }; -};
\ No newline at end of file +}; diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index bfd33734faca..e9b8360b3288 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -12,32 +12,32 @@ unit prefixes. Time/Frequency ---------------------------------------- -mhz : megahertz --hz : Hertz (preferred) --sec : seconds --ms : milliseconds --us : microseconds --ns : nanoseconds +-hz : hertz (preferred) +-sec : second +-ms : millisecond +-us : microsecond +-ns : nanosecond Distance ---------------------------------------- --mm : millimeters +-mm : millimeter Electricity ---------------------------------------- --microamp : micro amps --microamp-hours : micro amp-hours --ohms : Ohms --micro-ohms : micro Ohms --microwatt-hours: micro Watt-hours --microvolt : micro volts --picofarads : picofarads --femtofarads : femtofarads +-microamp : microampere +-microamp-hours : microampere hour +-ohms : ohm +-micro-ohms : microohm +-microwatt-hours: microwatt hour +-microvolt : microvolt +-picofarads : picofarad +-femtofarads : femtofarad Temperature ---------------------------------------- --celsius : Degrees Celsius --millicelsius : Degreee milli-Celsius +-celsius : degree Celsius +-millicelsius : millidegree Celsius Pressure ---------------------------------------- --kpascal : kiloPascal +-kpascal : kilopascal diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt index 454c937076a2..d48f9eb3636e 100644 --- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt +++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt @@ -4,6 +4,8 @@ General Properties: - compatible Should be "fsl,etsec-ptp" for eTSEC Should be "fsl,fman-ptp-timer" for DPAA FMan + Should be "fsl,dpaa2-ptp" for DPAA2 + Should be "fsl,enetc-ptp" for ENETC - reg Offset and length of the register set for the device - interrupts There should be at least two interrupts. Some devices have as many as four PTP related interrupts. diff --git a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt index 7d9d3f90641b..493bec80d59b 100644 --- a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt @@ -2,10 +2,7 @@ Ingenic JZ47xx PWM Controller ============================= Required properties: -- compatible: One of: - * "ingenic,jz4740-pwm" - * "ingenic,jz4770-pwm" - * "ingenic,jz4780-pwm" +- compatible: Should be "ingenic,jz4740-pwm" - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. - clocks : phandle to the external clock. diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt new file mode 100644 index 000000000000..36447e3c9378 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt @@ -0,0 +1,33 @@ +SiFive PWM controller + +Unlike most other PWM controllers, the SiFive PWM controller currently only +supports one period for all channels in the PWM. All PWMs need to run at +the same period. The period also has significant restrictions on the values +it can achieve, which the driver rounds to the nearest achievable period. +PWM RTL that corresponds to the IP block version numbers can be found +here: + +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm + +Required properties: +- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". + Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive + PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the + SiFive PWM v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details. +- reg: physical base address and length of the controller's registers +- clocks: Should contain a clock identifier for the PWM's parent clock. +- #pwm-cells: Should be 3. See pwm.txt in this directory + for a description of the cell format. +- interrupts: one interrupt per PWM channel + +Examples: + +pwm: pwm@10020000 { + compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; + reg = <0x0 0x10020000 0x0 0x1000>; + clocks = <&tlclk>; + interrupt-parent = <&plic>; + interrupts = <42 43 44 45>; + #pwm-cells = <3>; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt index bd23302e84be..6521bc44a74e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -11,8 +11,10 @@ Required parameters: bindings defined in pwm.txt. Optional properties: -- pinctrl-names: Set to "default". -- pinctrl-0: Phandle pointing to pin configuration node for PWM. +- pinctrl-names: Set to "default". An additional "sleep" state can be + defined to set pins in sleep state when in low power. +- pinctrl-n: Phandle(s) pointing to pin configuration node for PWM, + respectively for "default" and "sleep" states. Example: timer@40002400 { @@ -21,7 +23,8 @@ Example: pwm { compatible = "st,stm32-pwm-lp"; #pwm-cells = <3>; - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&lppwm1_pins>; + pinctrl-1 = <&lppwm1_sleep_pins>; }; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt index 3e6d55018d7a..a8690bfa5e1f 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -8,6 +8,8 @@ Required parameters: - pinctrl-names: Set to "default". - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt +- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells + bindings defined in pwm.txt. Optional parameters: - st,breakinput: One or two <index level filter> to describe break input configurations. @@ -28,6 +30,7 @@ Example: pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; pinctrl-0 = <&pwm1_pins>; pinctrl-names = "default"; st,breakinput = <0 1 5>; diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt index 443564d7784f..69bf41949b01 100644 --- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt @@ -5,7 +5,8 @@ of analogue I/O. This document lists regulator specific bindings, see the primary binding document: - ../mfd/arizona.txt + For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt + For Cirrus Logic Madera codecs: ../mfd/madera.txt Optional properties: - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index d289c2f7455a..a650b457085d 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -12,10 +12,13 @@ maintainers: description: Any property defined as part of the core regulator binding, defined in - regulator.txt, can also be used. However a fixed voltage regulator is + regulator.yaml, can also be used. However a fixed voltage regulator is expected to have the regulator-min-microvolt and regulator-max-microvolt to be the same. +allOf: + - $ref: "regulator.yaml#" + properties: compatible: const: regulator-fixed diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt deleted file mode 100644 index dd25e73b5d79..000000000000 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ /dev/null @@ -1,57 +0,0 @@ -GPIO controlled regulators - -Required properties: -- compatible : Must be "regulator-gpio". -- regulator-name : Defined in regulator.txt as optional, but required - here. -- gpios : Array of one or more GPIO pins used to select the - regulator voltage/current listed in "states". -- states : Selection of available voltages/currents provided by - this regulator and matching GPIO configurations to - achieve them. If there are no states in the "states" - array, use a fixed regulator instead. - -Optional properties: -- enable-gpios : GPIO used to enable/disable the regulator. - Warning, the GPIO phandle flags are ignored and the - GPIO polarity is controlled solely by the presence - of "enable-active-high" DT property. This is due to - compatibility with old DTs. -- enable-active-high : Polarity of "enable-gpio" GPIO is active HIGH. - Default is active LOW. -- gpios-states : On operating systems, that don't support reading back - gpio values in output mode (most notably linux), this - array provides the state of GPIO pins set when - requesting them from the gpio controller. Systems, - that are capable of preserving state when requesting - the lines, are free to ignore this property. - 0: LOW, 1: HIGH. Default is LOW if nothing else - is specified. -- startup-delay-us : Startup time in microseconds. -- regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to voltage. - -Any property defined as part of the core regulator binding defined in -regulator.txt can also be used. - -Example: - - mmciv: gpio-regulator { - compatible = "regulator-gpio"; - - regulator-name = "mmci-gpio-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; - regulator-boot-on; - - enable-gpios = <&gpio0 23 0x4>; - gpios = <&gpio0 24 0x4 - &gpio0 25 0x4>; - states = <1800000 0x3 - 2200000 0x2 - 2600000 0x1 - 2900000 0x0>; - - startup-delay-us = <100000>; - enable-active-high; - }; diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml new file mode 100644 index 000000000000..9d3b28417fb6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: regulator-gpio + + regulator-name: true + + enable-gpios: + description: GPIO to use to enable/disable the regulator. + Warning, the GPIO phandle flags are ignored and the GPIO polarity is + controlled solely by the presence of "enable-active-high" DT property. + This is due to compatibility with old DTs. + maxItems: 1 + + gpios: + description: Array of one or more GPIO pins used to select the regulator + voltage/current listed in "states". + minItems: 1 + maxItems: 8 # Should be enough... + + gpios-states: + description: | + On operating systems, that don't support reading back gpio values in + output mode (most notably linux), this array provides the state of GPIO + pins set when requesting them from the gpio controller. Systems, that are + capable of preserving state when requesting the lines, are free to ignore + this property. + 0: LOW + 1: HIGH + Default is LOW if nothing else is specified. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - maxItems: 8 + items: + enum: [ 0, 1 ] + default: 0 + + states: + description: Selection of available voltages/currents provided by this + regulator and matching GPIO configurations to achieve them. If there are + no states in the "states" array, use a fixed regulator instead. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value + + startup-delay-us: + description: startup time in microseconds + + enable-active-high: + description: Polarity of "enable-gpio" GPIO is active HIGH. Default is + active LOW. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + regulator-type: + description: Specifies what is being regulated. + allOf: + - $ref: /schemas/types.yaml#/definitions/string + - enum: + - voltage + - current + default: voltage + +required: + - compatible + - regulator-name + - gpios + - states + +examples: + - | + gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "mmci-gpio-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-boot-on; + + enable-gpios = <&gpio0 23 0x4>; + gpios = <&gpio0 24 0x4 + &gpio0 25 0x4>; + states = <1800000 0x3>, + <2200000 0x2>, + <2600000 0x1>, + <2900000 0x0>; + + startup-delay-us = <100000>; + enable-active-high; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/max8660.txt b/Documentation/devicetree/bindings/regulator/max8660.txt deleted file mode 100644 index 8ba994d8a142..000000000000 --- a/Documentation/devicetree/bindings/regulator/max8660.txt +++ /dev/null @@ -1,47 +0,0 @@ -Maxim MAX8660 voltage regulator - -Required properties: -- compatible: must be one of "maxim,max8660", "maxim,max8661" -- reg: I2C slave address, usually 0x34 -- any required generic properties defined in regulator.txt - -Example: - - i2c_master { - max8660@34 { - compatible = "maxim,max8660"; - reg = <0x34>; - - regulators { - regulator@0 { - regulator-compatible= "V3(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator@1 { - regulator-compatible= "V4(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator@2 { - regulator-compatible= "V5(LDO)"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <2000000>; - }; - - regulator@3 { - regulator-compatible= "V6(LDO)"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - regulator@4 { - regulator-compatible= "V7(LDO)"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml new file mode 100644 index 000000000000..9c038698f880 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8660.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8660 voltage regulator + +maintainers: + - Daniel Mack <zonque@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max8660 + - maxim,max8661 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "regulator-.+": + $ref: "regulator.yaml#" + + additionalProperties: false + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-V3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + regulator-V6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-V7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt index 10a6dadc008e..6a7c8a92fdb0 100644 --- a/Documentation/devicetree/bindings/regulator/pv88060.txt +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -121,4 +121,4 @@ Example regulator-max-microvolt = <5000000>; }; }; - };
\ No newline at end of file + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index 7ef2dbe48e8a..14d2eee96b3d 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -97,7 +97,7 @@ Second Level Nodes - Regulators sent for this regulator including those which are for a strictly lower power state. -Other properties defined in Documentation/devicetree/bindings/regulator.txt +Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt may also be used. regulator-initial-mode and regulator-allowed-modes may be specified for VRM regulators using mode values from include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 406f2e570c50..430b8622bda1 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -4,11 +4,13 @@ Qualcomm SPMI Regulators Usage: required Value type: <string> Definition: must be one of: + "qcom,pm8005-regulators" "qcom,pm8841-regulators" "qcom,pm8916-regulators" "qcom,pm8941-regulators" "qcom,pm8994-regulators" "qcom,pmi8994-regulators" + "qcom,pms405-regulators" - interrupts: Usage: optional @@ -110,6 +112,23 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_l1_l2-supply: +- vdd_l3_l8-supply: +- vdd_l4-supply: +- vdd_l5_l6-supply: +- vdd_l10_l11_l12_l13-supply: +- vdd_l7-supply: +- vdd_l9-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply + Usage: optional (pms405 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + - qcom,saw-reg: Usage: optional Value type: <phandle> @@ -120,6 +139,9 @@ The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the PMICs below. +pm8005: + s1, s2, s3, s4 + pm8841: s1, s2, s3, s4, s5, s6, s7, s8 diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 0a3f087d5844..487ccd8370b3 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -1,139 +1 @@ -Voltage/Current Regulators - -Optional properties: -- regulator-name: A string used as a descriptive name for regulator outputs -- regulator-min-microvolt: smallest voltage consumers may set -- regulator-max-microvolt: largest voltage consumers may set -- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops -- regulator-min-microamp: smallest current consumers may set -- regulator-max-microamp: largest current consumers may set -- regulator-input-current-limit-microamp: maximum input current regulator allows -- regulator-always-on: boolean, regulator should never be disabled -- regulator-boot-on: bootloader/firmware enabled regulator -- regulator-allow-bypass: allow the regulator to go into bypass mode -- regulator-allow-set-load: allow the regulator performance level to be configured -- <name>-supply: phandle to the parent supply/regulator node -- regulator-ramp-delay: ramp delay for regulator(in uV/us) - For hardware which supports disabling ramp rate, it should be explicitly - initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. -- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply - rail to reach the target voltage, plus/minus whatever tolerance the board - design requires. This property describes the total system ramp time - required due to the combination of internal ramping of the regulator itself, - and board design issues such as trace capacitance and load on the supply. -- regulator-settling-time-us: Settling time, in microseconds, for voltage - change if regulator have the constant time for any level voltage change. - This is useful when regulator have exponential voltage change. -- regulator-settling-time-up-us: Settling time, in microseconds, for voltage - increase if the regulator needs a constant time to settle after voltage - increases of any level. This is useful for regulators with exponential - voltage changes. -- regulator-settling-time-down-us: Settling time, in microseconds, for voltage - decrease if the regulator needs a constant time to settle after voltage - decreases of any level. This is useful for regulators with exponential - voltage changes. -- regulator-soft-start: Enable soft start so that voltage ramps slowly -- regulator-state-standby sub-root node for Standby mode - : equivalent with standby Linux sleep state, which provides energy savings - with a relatively quick transition back time. -- regulator-state-mem sub-root node for Suspend-to-RAM mode - : suspend to memory, the device goes to sleep, but all data stored in memory, - only some external interrupt can wake the device. -- regulator-state-disk sub-root node for Suspend-to-DISK mode - : suspend to disk, this state operates similarly to Suspend-to-RAM, - but includes a final step of writing memory contents to disk. -- regulator-state-[mem/disk/standby] node has following common properties: - - regulator-on-in-suspend: regulator should be on in suspend state. - - regulator-off-in-suspend: regulator should be off in suspend state. - - regulator-suspend-min-microvolt: minimum voltage may be set in - suspend state. - - regulator-suspend-max-microvolt: maximum voltage may be set in - suspend state. - - regulator-suspend-microvolt: the default voltage which regulator - would be set in suspend. This property is now deprecated, instead - setting voltage for suspend mode via the API which regulator - driver provides is recommended. - - regulator-changeable-in-suspend: whether the default voltage and - the regulator on/off in suspend can be changed in runtime. - - regulator-mode: operating mode in the given suspend state. - The set of possible operating modes depends on the capabilities of - every hardware so the valid modes are documented on each regulator - device tree binding document. -- regulator-initial-mode: initial operating mode. The set of possible operating - modes depends on the capabilities of every hardware so each device binding - documentation explains which values the regulator supports. -- regulator-allowed-modes: list of operating modes that software is allowed to - configure for the regulator at run-time. Elements may be specified in any - order. The set of possible operating modes depends on the capabilities of - every hardware so each device binding document explains which values the - regulator supports. -- regulator-system-load: Load in uA present on regulator that is not captured by - any consumer request. -- regulator-pull-down: Enable pull down resistor when the regulator is disabled. -- regulator-over-current-protection: Enable over current protection. -- regulator-active-discharge: tristate, enable/disable active discharge of - regulators. The values are: - 0: Disable active discharge. - 1: Enable active discharge. - Absence of this property will leave configuration to default. -- regulator-coupled-with: Regulators with which the regulator - is coupled. The linkage is 2-way - all coupled regulators should be linked - with each other. A regulator should not be coupled with its supplier. -- regulator-coupled-max-spread: Array of maximum spread between voltages of - coupled regulators in microvolts, each value in the array relates to the - corresponding couple specified by the regulator-coupled-with property. -- regulator-max-step-microvolt: Maximum difference between current and target - voltages that can be changed safely in a single step. - -Deprecated properties: -- regulator-compatible: If a regulator chip contains multiple - regulators, and if the chip's binding contains a child node that - describes each regulator, then this property indicates which regulator - this child node is intended to configure. If this property is missing, - the node's name will be used instead. - -Example: - - xyzreg: regulator@0 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - vin-supply = <&vin>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - -Regulator Consumers: -Consumer nodes can reference one or more of its supplies/ -regulators using the below bindings. - -- <name>-supply: phandle to the regulator node - -These are the same bindings that a regulator in the above -example used to reference its own supply, in which case -its just seen as a special case of a regulator being a -consumer itself. - -Example of a consumer device node (mmc) referencing two -regulators (twl_reg1 and twl_reg2), - - twl_reg1: regulator@0 { - ... - ... - ... - }; - - twl_reg2: regulator@1 { - ... - ... - ... - }; - - mmc: mmc@0 { - ... - ... - vmmc-supply = <&twl_reg1>; - vmmcaux-supply = <&twl_reg2>; - }; +This file has moved to regulator.yaml. diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml new file mode 100644 index 000000000000..02c3043ce419 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltage/Current Regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +properties: + regulator-name: + description: A string used as a descriptive name for regulator outputs + $ref: "/schemas/types.yaml#/definitions/string" + + regulator-min-microvolt: + description: smallest voltage consumers may set + + regulator-max-microvolt: + description: largest voltage consumers may set + + regulator-microvolt-offset: + description: Offset applied to voltages to compensate for voltage drops + + regulator-min-microamp: + description: smallest current consumers may set + + regulator-max-microamp: + description: largest current consumers may set + + regulator-input-current-limit-microamp: + description: maximum input current regulator allows + + regulator-always-on: + description: boolean, regulator should never be disabled + type: boolean + + regulator-boot-on: + description: bootloader/firmware enabled regulator + type: boolean + + regulator-allow-bypass: + description: allow the regulator to go into bypass mode + type: boolean + + regulator-allow-set-load: + description: allow the regulator performance level to be configured + type: boolean + + regulator-ramp-delay: + description: ramp delay for regulator(in uV/us) For hardware which supports + disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay + = <0>) for disabling ramp delay. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-enable-ramp-delay: + description: The time taken, in microseconds, for the supply rail to + reach the target voltage, plus/minus whatever tolerance the board + design requires. This property describes the total system ramp time + required due to the combination of internal ramping of the regulator + itself, and board design issues such as trace capacitance and load + on the supply. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-settling-time-us: + description: Settling time, in microseconds, for voltage change if regulator + have the constant time for any level voltage change. This is useful + when regulator have exponential voltage change. + + regulator-settling-time-up-us: + description: Settling time, in microseconds, for voltage increase if + the regulator needs a constant time to settle after voltage increases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-settling-time-down-us: + description: Settling time, in microseconds, for voltage decrease if + the regulator needs a constant time to settle after voltage decreases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-soft-start: + description: Enable soft start so that voltage ramps slowly + type: boolean + + regulator-initial-mode: + description: initial operating mode. The set of possible operating modes + depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-allowed-modes: + description: list of operating modes that software is allowed to configure + for the regulator at run-time. Elements may be specified in any order. + The set of possible operating modes depends on the capabilities of + every hardware so each device binding document explains which values + the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + + regulator-system-load: + description: Load in uA present on regulator that is not captured by + any consumer request. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-pull-down: + description: Enable pull down resistor when the regulator is disabled. + type: boolean + + regulator-over-current-protection: + description: Enable over current protection. + type: boolean + + regulator-active-discharge: + description: | + tristate, enable/disable active discharge of regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + + regulator-coupled-with: + description: Regulators with which the regulator is coupled. The linkage + is 2-way - all coupled regulators should be linked with each other. + A regulator should not be coupled with its supplier. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + + regulator-coupled-max-spread: + description: Array of maximum spread between voltages of coupled regulators + in microvolts, each value in the array relates to the corresponding + couple specified by the regulator-coupled-with property. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-max-step-microvolt: + description: Maximum difference between current and target voltages + that can be changed safely in a single step. + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + regulator-state-(standby|mem|disk): + type: object + description: + sub-nodes for regulator state in Standby, Suspend-to-RAM, and + Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux + sleep states. + + properties: + regulator-on-in-suspend: + description: regulator should be on in suspend state. + type: boolean + + regulator-off-in-suspend: + description: regulator should be off in suspend state. + type: boolean + + regulator-suspend-min-microvolt: + description: minimum voltage may be set in suspend state. + + regulator-suspend-max-microvolt: + description: maximum voltage may be set in suspend state. + + regulator-suspend-microvolt: + description: the default voltage which regulator would be set in + suspend. This property is now deprecated, instead setting voltage + for suspend mode via the API which regulator driver provides is + recommended. + + regulator-changeable-in-suspend: + description: whether the default voltage and the regulator on/off + in suspend can be changed in runtime. + type: boolean + + regulator-mode: + description: operating mode in the given suspend state. The set + of possible operating modes depends on the capabilities of every + hardware so the valid modes are documented on each regulator device + tree binding document. + $ref: "/schemas/types.yaml#/definitions/uint32" + + additionalProperties: false + +examples: + - | + xyzreg: regulator@0 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt new file mode 100644 index 000000000000..aa0733e49b90 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/slg51000.txt @@ -0,0 +1,88 @@ +* Dialog Semiconductor SLG51000 Voltage Regulator + +Required properties: +- compatible : Should be "dlg,slg51000" for SLG51000 +- reg : Specifies the I2C slave address. +- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. + These entries are required if regulators are enabled for a device. + An absence of these properties can cause the regulator registration to fail. + If some of input supply is powered through battery or always-on supply then + also it is required to have these parameters with proper node handle of always + on power supply. + vin3-supply: Input supply for ldo3 + vin4-supply: Input supply for ldo4 + vin5-supply: Input supply for ldo5 + vin6-supply: Input supply for ldo6 + vin7-supply: Input supply for ldo7 + +Optional properties: +- interrupt-parent : Specifies the reference to the interrupt controller. +- interrupts : IRQ line information. +- dlg,cs-gpios : Specify a valid GPIO for chip select + +Sub-nodes: +- regulators : This node defines the settings for the regulators. + The content of the sub-node is defined by the standard binding + for regulators; see regulator.txt. + + The SLG51000 regulators are bound using their names listed below: + ldo1 + ldo2 + ldo3 + ldo4 + ldo5 + ldo6 + ldo7 + +Optional properties for regulators: +- enable-gpios : Specify a valid GPIO for platform control of the regulator. + +Example: + pmic: slg51000@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + + regulators { + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt new file mode 100644 index 000000000000..479ad4c8758e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt @@ -0,0 +1,18 @@ +STM32 BOOSTER - Booster for ADC analog input switches + +Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used +to supply ADC analog input switches. + +Required properties: +- compatible: Should be one of: + "st,stm32h7-booster" + "st,stm32mp1-booster" +- st,syscfg: Phandle to system configuration controller. +- vdda-supply: Phandle to the vdda input analog voltage. + +Example: + booster: regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + vdda-supply = <&vdda>; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml new file mode 100644 index 000000000000..f97a4ecd7b91 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V bindings for 'cpus' DT nodes + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Palmer Dabbelt <palmer@sifive.com> + +allOf: + - $ref: /schemas/cpus.yaml# + +properties: + $nodename: + const: cpus + description: Container of cpu nodes + + '#address-cells': + const: 1 + description: | + A single unsigned 32-bit integer uniquely identifies each RISC-V + hart in a system. (See the "reg" node under the "cpu" node, + below). + + '#size-cells': + const: 0 + +patternProperties: + '^cpu@[0-9a-f]+$': + properties: + compatible: + type: array + items: + - enum: + - sifive,rocket0 + - sifive,e5 + - sifive,e51 + - sifive,u54-mc + - sifive,u54 + - sifive,u5 + - const: riscv + description: + Identifies that the hart uses the RISC-V instruction set + and identifies the type of the hart. + + mmu-type: + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 + description: + Identifies the MMU address translation mode used on this + hart. These values originate from the RISC-V Privileged + Specification document, available from + https://riscv.org/specifications/ + + riscv,isa: + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - rv64imac + - rv64imafdc + description: + Identifies the specific RISC-V instruction set architecture + supported by the hart. These are documented in the RISC-V + User-Level ISA document, available from + https://riscv.org/specifications/ + + timebase-frequency: + type: integer + minimum: 1 + description: + Specifies the clock frequency of the system timer in Hz. + This value is common to all harts on a single system image. + + interrupt-controller: + type: object + description: Describes the CPU's local interrupt controller + + properties: + '#interrupt-cells': + const: 1 + + compatible: + const: riscv,cpu-intc + + interrupt-controller: true + + required: + - '#interrupt-cells' + - compatible + - interrupt-controller + + required: + - riscv,isa + - timebase-frequency + - interrupt-controller + +examples: + - | + // Example 1: SiFive Freedom U540G Development Kit + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <1000000>; + cpu@0 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + cpu_intc0: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu@1 { + clock-frequency = <0>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + tlb-split; + cpu_intc1: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + - | + // Example 2: Spike ISA Simulator with 1 Hart + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml new file mode 100644 index 000000000000..9d17dc2f3f84 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/sifive.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/sifive.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive SoC-based boards + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Palmer Dabbelt <palmer@sifive.com> + +description: + SiFive SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - sifive,freedom-unleashed-a00 + - const: sifive,fu540-c000 + - const: sifive,fu540 +... diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index 0014da9145af..c223e54452da 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt @@ -2,6 +2,7 @@ HWRNG support for the iproc-rng200 driver Required properties: - compatible : Must be one of: + "brcm,bcm7211-rng200" "brcm,bcm7278-rng200" "brcm,iproc-rng200" - reg : base address and size of control register block diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 3cba12f855b7..20d351f268ef 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -53,6 +53,9 @@ Optional properties: programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs - overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -74,3 +77,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index c6b5262eb352..6fdffb735fb9 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -23,7 +23,12 @@ Required properties: - reg: The base address of the UART register bank. -- interrupts: A single interrupt specifier. +- interrupts: + index 0: an interrupt specifier for the UART controller itself + index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to + support Rx in-band wake up. If one would like to use this feature, + one must create an addtional pinctrl to reconfigure Rx pin to normal + GPIO before suspend. - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -39,7 +44,11 @@ Example: uart0: serial@11006000 { compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>; clocks = <&uart_clk>, <&bus_clk>; clock-names = "baud", "bus"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart_pin>; + pinctrl-1 = <&uart_pin_sleep>; }; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 9d3efed55deb..a6b19485c9dc 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -13,6 +13,7 @@ Required properties: - clocks: The input clock of the USART instance Optional properties: +- resets: Must contain the phandle to the reset controller. - pinctrl: The reference on the pins configuration - st,hw-flow-ctrl: bool flag to enable hardware flow control. - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low, diff --git a/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt b/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt new file mode 100644 index 000000000000..beaa3b64084e --- /dev/null +++ b/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt @@ -0,0 +1,38 @@ +DT compatible string versioning for SiFive open-source IP blocks + +This document describes the version specification for DT "compatible" +strings for open-source SiFive IP blocks. HDL for these IP blocks +can be found in this public repository: + +https://github.com/sifive/sifive-blocks + +IP block-specific DT compatible strings are contained within the HDL, +in the form "sifive,<ip-block-name><integer version number>". + +An example is "sifive,uart0" from: + +https://github.com/sifive/sifive-blocks/blob/v1.0/src/main/scala/devices/uart/UART.scala#L43 + +Until these IP blocks (or IP integration) support version +auto-discovery, the maintainers of these IP blocks intend to increment +the suffixed number in the compatible string whenever the software +interface to these IP blocks changes, or when the functionality of the +underlying IP blocks changes in a way that software should be aware of. + +Driver developers can use compatible string "match" values such as +"sifive,uart0" to indicate that their driver is compatible with the +register interface and functionality associated with the relevant +upstream sifive-blocks commits. It is expected that most drivers will +match on these IP block-specific compatible strings. + +DT data authors, when writing data for a particular SoC, should +continue to specify an SoC-specific compatible string value, such as +"sifive,fu540-c000-uart". This way, if SoC-specific +integration-specific bug fixes or workarounds are needed, the kernel +or other system software can match on this string to apply them. The +IP block-specific compatible string (such as "sifive,uart0") should +then be specified as a subsequent value. + +An example of this style: + + compatible = "sifive,fu540-c000-uart", "sifive,uart0"; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml new file mode 100644 index 000000000000..eb3992138eec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 I2S Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-i2s + - const: allwinner,sun6i-a31-i2s + - const: allwinner,sun8i-a83t-i2s + - const: allwinner,sun8i-h3-i2s + - const: allwinner,sun50i-a64-codec-i2s + - items: + - const: allwinner,sun50i-a64-i2s + - const: allwinner,sun8i-h3-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: mod + + # Even though it only applies to subschemas under the conditionals, + # not listing them here will trigger a warning because of the + # additionalsProperties set to false. + dmas: true + dma-names: true + resets: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-i2s + - allwinner,sun8i-a83t-i2s + - allwinner,sun8i-h3-i2s + - allwinner,sun50i-a64-codec-i2s + + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a83t-i2s + + then: + properties: + dmas: + minItems: 1 + maxItems: 2 + items: + - description: RX DMA Channel + - description: TX DMA Channel + description: + Some controllers cannot receive but can only transmit + data. In such a case, the RX DMA channel is to be omitted. + + dma-names: + oneOf: + - items: + - const: rx + - const: tx + - const: tx + description: + Some controllers cannot receive but can only transmit + data. In such a case, the RX name is to be omitted. + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + i2s0: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <0 16 4>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma 0 3>, <&dma 0 3>; + dma-names = "rx", "tx"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml new file mode 100644 index 000000000000..e0284d8c3b63 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 S/PDIF Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-spdif + - const: allwinner,sun6i-a31-spdif + - const: allwinner,sun8i-h3-spdif + - const: allwinner,sun50i-h6-spdif + - items: + - const: allwinner,sun8i-a83t-spdif + - const: allwinner,sun8i-h3-spdif + - items: + - const: allwinner,sun50i-a64-spdif + - const: allwinner,sun8i-h3-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: spdif + + # Even though it only applies to subschemas under the conditionals, + # not listing them here will trigger a warning because of the + # additionalsProperties set to false. + dmas: true + dma-names: true + resets: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-spdif + - allwinner,sun8i-h3-spdif + + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-spdif + + then: + properties: + dmas: + description: TX DMA Channel + + dma-names: + const: tx + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x40>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma 0 2>, <&dma 0 2>; + dma-names = "rx", "tx"; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt index 3b94a715a0b9..8835a43edfbb 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt @@ -15,11 +15,15 @@ Required properties: * "lrclk" : sample clock * "lrclk_sel": sample clock input multiplexer -Example of TDMOUT_A on the A113 SoC: +Optional property: +- resets: phandle to the dedicated reset line of the tdm formatter. + +Example of TDMOUT_A on the S905X2 SoC: tdmout_a: audio-controller@500 { compatible = "amlogic,axg-tdmout"; reg = <0x0 0x500 0x0 0x40>; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt new file mode 100644 index 000000000000..aa6c35570d31 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt @@ -0,0 +1,55 @@ +* Amlogic HDMI Tx control glue + +Required properties: +- compatible: "amlogic,g12a-tohdmitx" +- reg: physical base address of the controller and length of memory + mapped region. +- #sound-dai-cells: should be 1. + +Example on the S905X2 SoC: + +tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; +}; + +Example of an 'amlogic,axg-sound-card': + +sound { + compatible = "amlogic,axg-sound-card"; + +[...] + + dai-link-x { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&external_dac>; + }; + }; + + dai-link-y { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + }; + + dai-link-z { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt index 80ae910dbf6c..47b868b5ab01 100644 --- a/Documentation/devicetree/bindings/sound/cs42l73.txt +++ b/Documentation/devicetree/bindings/sound/cs42l73.txt @@ -19,4 +19,4 @@ codec: cs42l73@4a { reg = <0x4a>; reset_gpio = <&gpio 10 0>; chgfreq = <0x05>; -};
\ No newline at end of file +}; diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt index 8619a156d038..bbfe39347c20 100644 --- a/Documentation/devicetree/bindings/sound/cs42xx8.txt +++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt @@ -14,6 +14,11 @@ Required properties: - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt +Optional properties: + + - reset-gpios : a GPIO spec to define which pin is connected to the chip's + !RESET pin + Example: cs42888: codec@48 { @@ -25,4 +30,5 @@ cs42888: codec@48 { VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>; + reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index a58f79f5345c..c483dcec01f8 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -44,6 +44,9 @@ Optional properties: please refer to pinctrl-bindings.txt - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK + and FS rate if applicable: + AUCLK rate = auxclk-fs-ratio * FS rate Optional GPIO support: If any McASP pin need to be used as GPIO then the McASP node must have: diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt new file mode 100644 index 000000000000..5e669ce552f4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/madera.txt @@ -0,0 +1,67 @@ +Cirrus Logic Madera class audio codecs + +This describes audio configuration bindings for these codecs. + +See also the core bindings for the parent MFD driver: +See Documentation/devicetree/bindings/mfd/madera.txt + +and defines for values used in these bindings: +include/dt-bindings/sound/madera.h + +These properties are all contained in the parent MFD node. + +Optional properties: + - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally + connected to DMICs on each input, one cell per input. + <IN1 IN2 IN3 ...> + A value of 0 indicates MICVDD and is the default, other values depend on the + codec: + For CS47L35 one of the CS47L35_DMIC_REF_xxx values + For all other codecs one of the MADERA_DMIC_REF_xxx values + Also see the datasheet for a description of the INn_DMIC_SUP field. + + - cirrus,inmode : A list of input mode settings for each input. A maximum of + 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR. + For non-muxed inputs the first two cells for that input set the mode for + the left and right channel and the second two cells must be 0. + For muxed inputs the first two cells for that input set the mode of the + left and right A inputs and the second two cells set the mode of the left + and right B inputs. + Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter + than the number of inputs the unspecified inputs default to + MADERA_INMODE_DIFF. + + - cirrus,out-mono : Mono bit for each output, maximum of six cells if the + array is shorter outputs will be set to stereo. + + - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks + will be generated for. Useful when clock master for systems where the I2S + bus has multiple data lines. + One cell for each AIF, use a value of zero for AIFs that should be handled + normally. + + - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + + - cirrus,pdm-mute : PDM mute format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + +Example: + +cs47l35@0 { + compatible = "cirrus,cs47l35"; + + cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>; + cirrus,inmode = < + MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */ + MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */ + MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */ + 0 0 /* not used on this codec */ + >; + cirrus,out-mono = <0 0 0 0 0 0>; + cirrus,max-channels-clocked = <2 0 0>; +}; diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt index 28645a2ff885..4bce14ce806f 100644 --- a/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/Documentation/devicetree/bindings/sound/max98357a.txt @@ -9,6 +9,10 @@ Optional properties: - sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. If this option is not specified then driver does not manage the pin state (e.g. chip is always on). +- sdmode-delay : specify delay time for SD_MODE pin. + If this option is specified, which means it's required i2s clocks + ready before SD_MODE is unmuted in order to avoid the speaker pop noise. + It's observed that 5ms is sufficient. Example: diff --git a/Documentation/devicetree/bindings/sound/rt1011.txt b/Documentation/devicetree/bindings/sound/rt1011.txt new file mode 100644 index 000000000000..35a23e60d679 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1011.txt @@ -0,0 +1,32 @@ +RT1011 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1011". + +- reg : The I2C address of the device. This I2C address decide by + two input pins (ASEL1 and ASEL2). + ------------------------------------- + | ASEL2 | ASEL1 | Address | + ------------------------------------- + | 0 | 0 | 0x38 | + ------------------------------------- + | 0 | 1 | 0x39 | + ------------------------------------- + | 1 | 0 | 0x3a | + ------------------------------------- + | 1 | 1 | 0x3b | + ------------------------------------- + +Pins on the device (for linking into audio routes) for RT1011: + + * SPO + +Example: + +rt1011: codec@38 { + compatible = "realtek,rt1011"; + reg = <0x38>; +}; diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt new file mode 100755 index 000000000000..2d46084afce4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1308.txt @@ -0,0 +1,17 @@ +RT1308 audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1308". + +- reg : The I2C address of the device. + + +Example: + +rt1308: rt1308@10 { + compatible = "realtek,rt1308"; + reg = <0x10>; +}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt index 58c341300552..cbf24bcd1b8d 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index 3f4467ff0aa2..944743dd9212 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -41,7 +41,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt deleted file mode 100644 index 61e71c1729e0..000000000000 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Allwinner A10 I2S controller - -The I2S bus (Inter-IC sound bus) is a serial link for digital -audio data transfer between devices in the system. - -Required properties: - -- compatible: should be one of the following: - - "allwinner,sun4i-a10-i2s" - - "allwinner,sun6i-a31-i2s" - - "allwinner,sun8i-a83t-i2s" - - "allwinner,sun8i-h3-i2s" - - "allwinner,sun50i-a64-codec-i2s" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the I2S interrupt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain the following: - - "apb" : clock for the I2S bus interface - - "mod" : module clock for the I2S controller -- #sound-dai-cells : Must be equal to 0 - -Required properties for the following compatibles: - - "allwinner,sun6i-a31-i2s" - - "allwinner,sun8i-a83t-i2s" - - "allwinner,sun8i-h3-i2s" - - "allwinner,sun50i-a64-codec-i2s" -- resets: phandle to the reset line for this codec - -Example: - -i2s0: i2s@1c22400 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-i2s"; - reg = <0x01c22400 0x400>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; - clock-names = "apb", "mod"; - dmas = <&dma SUN4I_DMA_NORMAL 3>, - <&dma SUN4I_DMA_NORMAL 3>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt deleted file mode 100644 index 0c64a209c2e9..000000000000 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ /dev/null @@ -1,42 +0,0 @@ -Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller - -The Allwinner S/PDIF audio block is a transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. -For now only playback is supported. - -Required properties: - - - compatible : should be one of the following: - - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC - - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Includes the following entries: - "apb" clock for the spdif bus. - "spdif" clock for spdif controller. - - - resets : reset specifier for the ahb reset (A31 and newer only) - -Example: - -spdif: spdif@1c21000 { - compatible = "allwinner,sun4i-a10-spdif"; - reg = <0x01c21000 0x40>; - interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; - clock-names = "apb", "spdif"; - dmas = <&dma 0 2>, <&dma 0 2>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml new file mode 100644 index 000000000000..c374fd4923a6 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 SPI Controller Device Tree Bindings + +allOf: + - $ref: "spi-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: allwinner,sun4i-a10-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + num-cs: true + +patternProperties: + "^.*@[0-9a-f]+": + properties: + reg: + items: + minimum: 0 + maximum: 4 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi1: spi@1c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml new file mode 100644 index 000000000000..bda7a5befd8b --- /dev/null +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 SPI Controller Device Tree Bindings + +allOf: + - $ref: "spi-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + enum: + - allwinner,sun6i-a31-spi + - allwinner,sun8i-h3-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + resets: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + num-cs: true + +patternProperties: + "^.*@[0-9a-f]+": + properties: + reg: + items: + minimum: 0 + maximum: 4 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi1: spi@1c69000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <0 66 4>; + clocks = <&ahb1_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 21>; + #address-cells = <1>; + #size-cells = <0>; + }; + + - | + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <0 65 4>; + clocks = <&ccu 30>, <&ccu 82>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu 15>; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index 1f6e86f787ef..e07783505498 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -1,111 +1 @@ -SPI (Serial Peripheral Interface) busses - -SPI busses can be described with a node for the SPI controller device -and a set of child nodes for each SPI slave on the bus. The system's SPI -controller may be described for use in SPI master mode or in SPI slave mode, -but not for both at the same time. - -The SPI controller node requires the following properties: -- compatible - Name of SPI bus controller following generic names - recommended practice. - -In master mode, the SPI controller node requires the following additional -properties: -- #address-cells - number of cells required to define a chip select - address on the SPI bus. -- #size-cells - should be zero. - -In slave mode, the SPI controller node requires one additional property: -- spi-slave - Empty property. - -No other properties are required in the SPI bus node. It is assumed -that a driver for an SPI bus device will understand that it is an SPI bus. -However, the binding does not attempt to define the specific method for -assigning chip select numbers. Since SPI chip select configuration is -flexible and non-standardized, it is left out of this binding with the -assumption that board specific platform code will be used to manage -chip selects. Individual drivers can define additional properties to -support describing the chip select layout. - -Optional properties (master mode only): -- cs-gpios - gpios chip select. -- num-cs - total number of chipselects. - -If cs-gpios is used the number of chip selects will be increased automatically -with max(cs-gpios > hw cs). - -So if for example the controller has 2 CS lines, and the cs-gpios -property looks like this: - -cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; - -Then it should be configured so that num_chipselect = 4 with the -following mapping: - -cs0 : &gpio1 0 0 -cs1 : native -cs2 : &gpio1 1 0 -cs3 : &gpio1 2 0 - - -SPI slave nodes must be children of the SPI controller node. - -In master mode, one or more slave nodes (up to the number of chip selects) can -be present. Required properties are: -- compatible - Name of SPI device following generic names recommended - practice. -- reg - Chip select address of device. -- spi-max-frequency - Maximum SPI clocking speed of device in Hz. - -In slave mode, the (single) slave node is optional. -If present, it must be called "slave". Required properties are: -- compatible - Name of SPI device following generic names recommended - practice. - -All slave nodes can contain the following optional properties: -- spi-cpol - Empty property indicating device requires inverse clock - polarity (CPOL) mode. -- spi-cpha - Empty property indicating device requires shifted clock - phase (CPHA) mode. -- spi-cs-high - Empty property indicating device requires chip select - active high. -- spi-3wire - Empty property indicating device requires 3-wire mode. -- spi-lsb-first - Empty property indicating device requires LSB first mode. -- spi-tx-bus-width - The bus width (number of data wires) that is used for MOSI. - Defaults to 1 if not present. -- spi-rx-bus-width - The bus width (number of data wires) that is used for MISO. - Defaults to 1 if not present. -- spi-rx-delay-us - Microsecond delay after a read transfer. -- spi-tx-delay-us - Microsecond delay after a write transfer. - -Some SPI controllers and devices support Dual and Quad SPI transfer mode. -It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4 -wires (QUAD). -Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is -only 1 (SINGLE), 2 (DUAL) and 4 (QUAD). -Dual/Quad mode is not allowed when 3-wire mode is used. - -If a gpio chipselect is used for the SPI slave the gpio number will be passed -via the SPI master node cs-gpios property. - -SPI example for an MPC5200 SPI bus: - spi@f00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; - spi-max-frequency = <1000000>; - reg = <0>; - }; - - codec@1 { - compatible = "ti,tlv320aic26"; - spi-max-frequency = <100000>; - reg = <1>; - }; - }; +This file has moved to spi-controller.yaml. diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml new file mode 100644 index 000000000000..876c0623f322 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI Controller Generic Binding + +maintainers: + - Mark Brown <broonie@kernel.org> + +description: | + SPI busses can be described with a node for the SPI controller device + and a set of child nodes for each SPI slave on the bus. The system SPI + controller may be described for use in SPI master mode or in SPI slave mode, + but not for both at the same time. + +properties: + $nodename: + pattern: "^spi(@.*|-[0-9a-f])*$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + cs-gpios: + description: | + GPIOs used as chip selects. + If that property is used, the number of chip selects will be + increased automatically with max(cs-gpios, hardware chip selects). + + So if, for example, the controller has 2 CS lines, and the + cs-gpios looks like this + cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; + + Then it should be configured so that num_chipselect = 4, with + the following mapping + cs0 : &gpio1 0 0 + cs1 : native + cs2 : &gpio1 1 0 + cs3 : &gpio1 2 0 + + num-cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Total number of chip selects. + + spi-slave: + $ref: /schemas/types.yaml#/definitions/flag + description: + The SPI controller acts as a slave, instead of a master. + +patternProperties: + "^slave$": + type: object + + properties: + compatible: + description: + Compatible of the SPI device. + + required: + - compatible + + "^.*@[0-9a-f]+$": + type: object + + properties: + compatible: + description: + Compatible of the SPI device. + + reg: + maxItems: 1 + minimum: 0 + maximum: 256 + description: + Chip select used by the device. + + spi-3wire: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires 3-wire mode. + + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires inverse clock polarity (CPOL) mode. + + spi-cs-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the chip select active high. + + spi-lsb-first: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the LSB first mode. + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum SPI clocking speed of the device in Hz. + + spi-rx-bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 4 ] + - default: 1 + description: + Bus width to the SPI bus used for MISO. + + spi-rx-delay-us: + description: + Delay, in microseconds, after a read transfer. + + spi-tx-bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 4 ] + - default: 1 + description: + Bus width to the SPI bus used for MOSI. + + spi-tx-delay-us: + description: + Delay, in microseconds, after a write transfer. + + required: + - compatible + - reg + +examples: + - | + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt deleted file mode 100644 index 52db562f17a4..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-gpio.txt +++ /dev/null @@ -1,43 +0,0 @@ -SPI-GPIO devicetree bindings - -This represents a group of 3-n GPIO lines used for bit-banged SPI on dedicated -GPIO lines. - -Required properties: - - - compatible: should be set to "spi-gpio" - - #address-cells: should be set to <0x1> - - ranges - - sck-gpios: GPIO spec for the SCK line to use - - miso-gpios: GPIO spec for the MISO line to use - - mosi-gpios: GPIO spec for the MOSI line to use - - cs-gpios: GPIOs to use for chipselect lines. - Not needed if num-chipselects = <0>. - - num-chipselects: Number of chipselect lines. Should be <0> if a single device - with no chip select is connected. - -Deprecated bindings: - -These legacy GPIO line bindings can alternatively be used to define the -GPIO lines used, they should not be used in new device trees. - - - gpio-sck: GPIO spec for the SCK line to use - - gpio-miso: GPIO spec for the MISO line to use - - gpio-mosi: GPIO spec for the MOSI line to use - -Example: - - spi { - compatible = "spi-gpio"; - #address-cells = <0x1>; - ranges; - - sck-gpios = <&gpio 95 0>; - miso-gpios = <&gpio 98 0>; - mosi-gpios = <&gpio 97 0>; - cs-gpios = <&gpio 125 0>; - num-chipselects = <1>; - - /* clients */ - }; - diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml new file mode 100644 index 000000000000..55c4f1705f07 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-GPIO devicetree bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + This represents a group of 3-n GPIO lines used for bit-banged SPI on + dedicated GPIO lines. + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + const: spi-gpio + + sck-gpios: + description: GPIO spec for the SCK line to use + maxItems: 1 + + miso-gpios: + description: GPIO spec for the MISO line to use + maxItems: 1 + + mosi-gpios: + description: GPIO spec for the MOSI line to use + maxItems: 1 + + cs-gpios: + description: GPIOs to use for chipselect lines. + Not needed if num-chipselects = <0>. + minItems: 1 + maxItems: 1024 + + num-chipselects: + description: Number of chipselect lines. Should be <0> if a single device + with no chip select is connected. + $ref: "/schemas/types.yaml#/definitions/uint32" + + # Deprecated properties + gpio-sck: false + gpio-miso: false + gpio-mosi: false + +required: + - compatible + - num-chipselects + - sck-gpios + +examples: + - | + spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sck-gpios = <&gpio 95 0>; + miso-gpios = <&gpio 98 0>; + mosi-gpios = <&gpio 97 0>; + cs-gpios = <&gpio 125 0>; + num-chipselects = <1>; + + /* clients */ + }; + +... diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml new file mode 100644 index 000000000000..dfb697c69341 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-pl022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL022 SPI controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: "spi-controller.yaml#" + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl022 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl022 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - enum: + - SSPCLK + - sspclk + - const: apb_pclk + + pl022,autosuspend-delay: + description: delay in ms following transfer completion before the + runtime power management system suspends the device. A setting of 0 + indicates no delay and the device will be suspended immediately. + $ref: "/schemas/types.yaml#/definitions/uint32" + + pl022,rt: + description: indicates the controller should run the message pump with realtime + priority to minimise the transfer latency on the bus (boolean) + type: boolean + + dmas: + description: + Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt + minItems: 2 + maxItems: 32 + + dma-names: + description: + There must be at least one channel named "tx" for transmit and named "rx" + for receive. + minItems: 2 + maxItems: 32 + additionalItems: true + items: + - const: rx + - const: tx + +patternProperties: + "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": + type: object + # SPI slave nodes must be children of the SPI master node and can + # contain the following properties. + properties: + pl022,interface: + description: SPI interface type + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) + + pl022,com-mode: + description: Specifies the transfer mode + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 + + pl022,rx-level-trig: + description: Rx FIFO watermark level + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 4 + + pl022,tx-level-trig: + description: Tx FIFO watermark level + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 4 + + pl022,ctrl-len: + description: Microwire interface - Control length + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0x03 + maximum: 0x1f + + pl022,wait-state: + description: Microwire interface - Wait state + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + + pl022,duplex: + description: Microwire interface - Full/Half duplex + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + +required: + - compatible + - reg + - interrupts + +examples: + - | + spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 31 0x4>; + dmas = <&dma_controller 23 1>, + <&dma_controller 24 0>; + dma-names = "rx", "tx"; + + m25p80@1 { + compatible = "st,m25p80"; + reg = <1>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,interface = <0>; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt index adeeb63e84b9..bfc038b9478d 100644 --- a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt @@ -19,8 +19,11 @@ Required properties: - reg: chip-Select number (QSPI controller may connect 2 flashes) - spi-max-frequency: max frequency of spi bus -Optional property: +Optional properties: - spi-rx-bus-width: see ./spi-bus.txt for the description +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, +Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: DMA request names should include "tx" and "rx" if present. Example: diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt deleted file mode 100644 index c75d604a8290..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ /dev/null @@ -1,23 +0,0 @@ -Allwinner A10 SPI controller - -Required properties: -- compatible: Should be "allwinner,sun4-a10-spi". -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: phandle to the clocks feeding the SPI controller. Two are - needed: - - "ahb": the gated AHB parent clock - - "mod": the parent module clock -- clock-names: Must contain the clock names described just above - -Example: - -spi1: spi@1c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - #address-cells = <1>; - #size-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt deleted file mode 100644 index 435a8e0731ac..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ /dev/null @@ -1,44 +0,0 @@ -Allwinner A31/H3 SPI controller - -Required properties: -- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi". -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: phandle to the clocks feeding the SPI controller. Two are - needed: - - "ahb": the gated AHB parent clock - - "mod": the parent module clock -- clock-names: Must contain the clock names described just above -- resets: phandle to the reset controller asserting this device in - reset - -Optional properties: -- dmas: DMA specifiers for rx and tx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "rx" and "tx" if present. - -Example: - -spi1: spi@1c69000 { - compatible = "allwinner,sun6i-a31-spi"; - reg = <0x01c69000 0x1000>; - interrupts = <0 66 4>; - clocks = <&ahb1_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - resets = <&ahb1_rst 21>; -}; - -spi0: spi@1c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - resets = <&ccu RST_BUS_SPI0>; - #address-cells = <1>; - #size-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-synquacer.txt b/Documentation/devicetree/bindings/spi/spi-synquacer.txt new file mode 100644 index 000000000000..291dfa692d0a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-synquacer.txt @@ -0,0 +1,27 @@ +* Socionext Synquacer HS-SPI bindings + +Required Properties: +- compatible: should be "socionext,synquacer-spi" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. +- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) +- clock-names: Shall be "iHCLK" and "iPCLK" respectively + +Optional Properties: +- socionext,use-rtm: boolean, if required to use "retimed clock" for RX +- socionext,set-aces: boolean, if same active clock edges field to be set. + +Example: + + spi0: spi@ff110000 { + compatible = "socionext,synquacer-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsspi>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + }; diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt deleted file mode 100644 index 7638b4968ddb..000000000000 --- a/Documentation/devicetree/bindings/spi/spi_pl022.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM PL022 SPI controller - -Required properties: -- compatible : "arm,pl022", "arm,primecell" -- reg : Offset and length of the register set for the device -- interrupts : Should contain SPI controller interrupt -- num-cs : total number of chipselects - -Optional properties: -- cs-gpios : should specify GPIOs used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child nodes. - If unspecified, a single SPI device without a chip select can be used. -- pl022,autosuspend-delay : delay in ms following transfer completion before - the runtime power management system suspends the - device. A setting of 0 indicates no delay and the - device will be suspended immediately -- pl022,rt : indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) -- dmas : Two or more DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - - -SPI slave nodes must be children of the SPI master node and can -contain the following properties. - -- pl022,interface : interface type: - 0: SPI - 1: Texas Instruments Synchronous Serial Frame Format - 2: Microwire (Half Duplex) -- pl022,com-mode : specifies the transfer mode: - 0: interrupt mode - 1: polling mode (default mode if property not present) - 2: DMA mode -- pl022,rx-level-trig : Rx FIFO watermark level -- pl022,tx-level-trig : Tx FIFO watermark level -- pl022,ctrl-len : Microwire interface: Control length -- pl022,wait-state : Microwire interface: Wait state -- pl022,duplex : Microwire interface: Full/Half duplex - - -Example: - - spi@e0100000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0xe0100000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 31 0x4>; - dmas = <&dma-controller 23 1>, - <&dma-controller 24 0>; - dma-names = "rx", "tx"; - - m25p80@1 { - compatible = "st,m25p80"; - reg = <1>; - spi-max-frequency = <12000000>; - spi-cpol; - spi-cpha; - pl022,interface = <0>; - pl022,com-mode = <0x2>; - pl022,rx-level-trig = <0>; - pl022,tx-level-trig = <0>; - pl022,ctrl-len = <0x11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt new file mode 100644 index 000000000000..d57659996d62 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt @@ -0,0 +1,25 @@ +NXP System Counter Module(sys_ctr) + +The system counter(sys_ctr) is a programmable system counter which provides +a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in +applications where the counter is always powered and support multiple, +unrelated clocks. The compare frame inside can be used for timer purpose. + +Required properties: + +- compatible : should be "nxp,sysctr-timer" +- reg : Specifies the base physical address and size of the comapre + frame and the counter control, read & compare. +- interrupts : should be the first compare frames' interrupt +- clocks : Specifies the counter clock. +- clock-names: Specifies the clock's name of this module + +Example: + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */ + clocks = <&clk_8m>; + clock-names = "per"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 747fd3f689dc..2e742d399e87 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -52,6 +52,10 @@ properties: - at,24c08 # i2c trusted platform module (TPM) - atmel,at97sc3204t + # i2c h/w symmetric crypto module + - atmel,atsha204a + # i2c h/w elliptic curve crypto module + - atmel,atecc508a # CM32181: Ambient Light Sensor - capella,cm32181 # CM3232: Ambient Light Sensor diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 49eac0dc86b0..aafff3a6904d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -42,6 +42,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. +- snps,need-phy-for-wake: If present indicates that the phy needs to be left + on for remote wakeup during suspend. - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. @@ -58,4 +60,5 @@ Example: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; + snps,need-phy-for-wake; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 8e5265e9f658..66780a47ad85 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -64,6 +64,8 @@ Optional properties: - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal to the PHY. + - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled. + - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled. - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection in PHY P3 power state. - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index d3b4f6415920..059f6ef1ad4a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -74,7 +74,7 @@ additionalProperties: false examples: - | - ehci@e0000300 { + usb@e0000300 { compatible = "ibm,usb-ehci-440epx", "generic-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; @@ -89,7 +89,6 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; - phy-names = "usb"; }; ... diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas,usb3.txt index 35039e720515..35039e720515 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas,usb3.txt diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt index b8acc2a994a8..e39255ea6e4f 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt @@ -20,9 +20,11 @@ Required properties: - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device + - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices - "renesas,rza1-usbhs" for RZ/A1 compatible device + - "renesas,rza2-usbhs" for RZ/A2 compatible device When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 33a65a45e319..18b79c4cf7d5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -49,6 +49,8 @@ patternProperties: description: Aeroflex Gaisler AB "^al,.*": description: Annapurna Labs + "^allegro,.*": + description: Allegro DVT "^allo,.*": description: Allo.com "^allwinner,.*": @@ -147,6 +149,8 @@ patternProperties: description: Broadcom Corporation "^buffalo,.*": description: Buffalo, Inc. + "^bur,.*": + description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International "^calxeda,.*": @@ -175,6 +179,8 @@ patternProperties: description: Common Hardware Reference Platform "^chunghwa,.*": description: Chunghwa Picture Tubes Ltd. + "^chuwi,.*": + description: Chuwi Innovation Ltd. "^ciaa,.*": description: Computadora Industrial Abierta Argentina "^cirrus,.*": @@ -185,8 +191,12 @@ patternProperties: description: Chips&Media, Inc. "^cnxt,.*": description: Conexant Systems, Inc. + "^colorfly,.*": + description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^corpro,.*": + description: Chengdu Corpro Technology Co., Ltd. "^cortina,.*": description: Cortina Systems, Inc. "^cosmic,.*": @@ -199,6 +209,8 @@ patternProperties: description: Crystalfontz America, Inc. "^csky,.*": description: Hangzhou C-SKY Microsystems Co., Ltd + "^csq,.*": + description: Shenzen Chuangsiqi Technology Co.,Ltd. "^cubietech,.*": description: Cubietech, Ltd. "^cypress,.*": @@ -219,6 +231,8 @@ patternProperties: description: Devantech, Ltd. "^dh,.*": description: DH electronics GmbH + "^difrnce,.*": + description: Shenzhen Yagu Electronic Technology Co., Ltd. "^digi,.*": description: Digi International Inc. "^digilent,.*": @@ -241,6 +255,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^dserve,.*": + description: dServe Technology B.V. "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*": @@ -263,6 +279,8 @@ patternProperties: description: Emlid, Ltd. "^emmicro,.*": description: EM Microelectronic + "^empire-electronix,.*": + description: Empire Electronix "^emtrion,.*": description: emtrion GmbH "^endless,.*": @@ -277,6 +295,8 @@ patternProperties: description: Ecole Polytechnique Fédérale de Lausanne "^epson,.*": description: Seiko Epson Corp. + "^esp,.*": + description: Espressif Systems Co. Ltd. "^est,.*": description: ESTeem Wireless Modems "^ettus,.*": @@ -327,6 +347,8 @@ patternProperties: description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. "^GEFanuc,.*": description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. + "^gemei,.*": + description: Gemei Digital Technology Co., Ltd. "^geniatech,.*": description: Geniatech, Inc. "^giantec,.*": @@ -373,10 +395,14 @@ patternProperties: description: Honeywell "^hp,.*": description: Hewlett Packard + "^hsg,.*": + description: HannStar Display Co. "^holtek,.*": description: Holtek Semiconductor, Inc. "^hwacom,.*": description: HwaCom Systems Inc. + "^hyundai,.*": + description: Hyundai Technology "^i2se,.*": description: I2SE GmbH "^ibm,.*": @@ -391,6 +417,10 @@ patternProperties: description: ILI Technology Corporation (ILITEK) "^img,.*": description: Imagination Technologies Ltd. + "^incircuit,.*": + description: In-Circuit GmbH + "^inet-tek,.*": + description: Shenzhen iNet Mobile Internet Technology Co., Ltd "^infineon,.*": description: Infineon Technologies "^inforce,.*": @@ -425,6 +455,8 @@ patternProperties: description: Japan Display Inc. "^jedec,.*": description: JEDEC Solid State Technology Association + "^jesurun,.*": + description: Shenzhen Jesurun Electronics Business Dept. "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^karo,.*": @@ -449,6 +481,8 @@ patternProperties: description: Rakuten Kobo Inc. "^koe,.*": description: Kaohsiung Opto-Electronics Inc. + "^kontron,.*": + description: Kontron S&T AG "^kosagi,.*": description: Sutajio Ko-Usagi PTE Ltd. "^kyo,.*": @@ -457,6 +491,8 @@ patternProperties: description: LaCie "^laird,.*": description: Laird PLC + "^lamobo,.*": + description: Ketai Huajie Technology Co., Ltd. "^lantiq,.*": description: Lantiq Semiconductor "^lattice,.*": @@ -475,6 +511,8 @@ patternProperties: description: Lichee Pi "^linaro,.*": description: Linaro Limited + "^linksprite,.*": + description: LinkSprite Technologies, Inc. "^linksys,.*": description: Belkin International, Inc. (Linksys) "^linux,.*": @@ -491,6 +529,8 @@ patternProperties: description: Liebherr-Werk Nenzing GmbH "^macnica,.*": description: Macnica Americas + "^mapleboard,.*": + description: Mapleboard.org "^marvell,.*": description: Marvell Technology Group Ltd. "^maxbotix,.*": @@ -531,6 +571,8 @@ patternProperties: description: Micron Technology Inc. "^mikroe,.*": description: MikroElektronika d.o.o. + "^miniand,.*": + description: Miniand Tech "^minix,.*": description: MINIX Technology Ltd. "^miramems,.*": @@ -661,24 +703,32 @@ patternProperties: description: Picochip Ltd "^pine64,.*": description: Pine64 + "^pineriver,.*": + description: Shenzhen PineRiver Designs Co., Ltd. "^pixcir,.*": description: PIXCIR MICROELECTRONICS Co., Ltd "^plantower,.*": description: Plantower Co., Ltd "^plathome,.*": - description: Plat'Home Co., Ltd. + description: Plat\'Home Co., Ltd. "^plda,.*": description: PLDA "^plx,.*": description: Broadcom Corporation (formerly PLX Technology) "^pni,.*": description: PNI Sensor Corporation + "^polaroid,.*": + description: Polaroid Corporation "^portwell,.*": description: Portwell Inc. "^poslab,.*": description: Poslab Technology Co., Ltd. + "^pov,.*": + description: Point of View International B.V. "^powervr,.*": description: PowerVR (deprecated, use img) + "^primux,.*": + description: Primux Trading, S.L. "^probox2,.*": description: PROBOX2 (by W2COMP Co., Ltd.) "^pulsedlight,.*": @@ -691,6 +741,8 @@ patternProperties: description: QEMU, a generic and open source machine emulator and virtualizer "^qi,.*": description: Qi Hardware + "^qihua,.*": + description: Chengdu Kaixuan Information Technology Co., Ltd. "^qiaodian,.*": description: QiaoDian XianShi Corporation "^qnap,.*": @@ -713,6 +765,8 @@ patternProperties: description: Realtek Semiconductor Corp. "^renesas,.*": description: Renesas Electronics Corporation + "^rervision,.*": + description: Shenzhen Rervision Technology Co., Ltd. "^richtek,.*": description: Richtek Technology Corporation "^ricoh,.*": @@ -781,8 +835,14 @@ patternProperties: description: Silergy Corp. "^siliconmitus,.*": description: Silicon Mitus, Inc. - "^simte,.*": - description: k + "^simtek,.*": + description: Cypress Semiconductor Corporation (Simtek Corporation) + "^sinlinx,.*": + description: Sinlinx Electronics Technology Co., LTD + "^sinovoip,.*": + description: SinoVoip Co., Ltd + "^sipeed,.*": + description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": description: SiRF Technology, Inc. "^sis,.*": @@ -795,6 +855,8 @@ patternProperties: description: Standard Microsystems Corporation "^snps,.*": description: Synopsys, Inc. + "^sochip,.*": + description: Shenzhen SoChip Technology Co., Ltd. "^socionext,.*": description: Socionext Inc. "^solidrun,.*": @@ -901,6 +963,8 @@ patternProperties: description: United Radiant Technology Corporation "^usi,.*": description: Universal Scientific Industrial Co., Ltd. + "^utoo,.*": + description: Aigo Digital Technology Co., Ltd. "^v3,.*": description: V3 Semiconductor "^vamrs,.*": @@ -937,10 +1001,14 @@ patternProperties: description: Winbond Electronics corp. "^winstar,.*": description: Winstar Display Corp. + "^wits,.*": + description: Shenzhen Merrii Technology Co., Ltd. (WITS) "^wlf,.*": description: Wolfson Microelectronics "^wm,.*": description: Wondermedia Technologies, Inc. + "^wobo,.*": + description: Wobo "^x-powers,.*": description: X-Powers "^xes,.*": @@ -951,6 +1019,8 @@ patternProperties: description: Xilinx "^xunlong,.*": description: Shenzhen Xunlong Software CO.,Limited + "^yones-toptech,.*": + description: Yones Toptech Co., Ltd. "^ysoft,.*": description: Y Soft Corporation a.s. "^zarlink,.*": @@ -968,7 +1038,7 @@ patternProperties: # Normal property name match without a comma # These should catch all node/property names without a prefix - "^[a-zA-Z0-9#][a-zA-Z0-9+\\-._@]{0,63}$": true + "^[a-zA-Z0-9#_][a-zA-Z0-9+\\-._@]{0,63}$": true "^[a-zA-Z0-9+\\-._]*@[0-9a-zA-Z,]*$": true "^#.*": true |