diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/net/mediatek-net.txt | 7 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 38 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 |
3 files changed, 16 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 5ca79290eabf..32eaaca04d9b 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -9,7 +9,8 @@ have dual GMAC each represented by a child node.. Required properties: - compatible: Should be "mediatek,mt7623-eth" - reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are "ethif", "esw", "gp2", "gp1" @@ -42,7 +43,9 @@ eth: ethernet@1b100000 { <ðsys CLK_ETHSYS_GP2>, <ðsys CLK_ETHSYS_GP1>; clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; resets = <ðsys MT2701_ETHSYS_ETH_RST>; reset-names = "eth"; diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 3f6a524cc5ff..32f4a2d6d0b3 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -1,13 +1,16 @@ == Amlogic Meson pinmux controller == Required properties for the root node: - - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" + - compatible: one of "amlogic,meson8-cbus-pinctrl" + "amlogic,meson8b-cbus-pinctrl" + "amlogic,meson8-aobus-pinctrl" + "amlogic,meson8b-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === -The 2 power domains of the controller (regular and always-on) are -represented as sub-nodes and each of them acts as a GPIO controller. +The GPIO bank for the controller is represented as a sub-node and it acts as a +GPIO controller. Required properties for sub-nodes are: - reg: should contain address and size for mux, pull-enable, pull and @@ -18,10 +21,6 @@ Required properties for sub-nodes are: - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 -Valid sub-node names are: - - "banks" for the regular domain - - "ao-bank" for the always-on domain - === Other sub-nodes === Child nodes without the "gpio-controller" represent some desired @@ -45,7 +44,7 @@ pinctrl-bindings.txt === Example === pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -61,15 +60,6 @@ pinctrl-bindings.txt #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - nand { mux { groups = "nand_io", "nand_io_ce0", "nand_io_ce1", @@ -79,18 +69,4 @@ pinctrl-bindings.txt function = "nand"; }; }; - - uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a", - "uart_cts_ao_a", "uart_rts_ao_a"; - function = "uart_ao"; - }; - - conf { - pins = "GPIOAO_0", "GPIOAO_1", - "GPIOAO_2", "GPIOAO_3"; - bias-disable; - }; - }; }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 1068ffce9f91..fdde63a5419c 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -15,9 +15,10 @@ Required properties: is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. - clocks: Must contain a list of phandle and clock specifier for the rtc - and source clocks. -- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the - same order as the clocks property. + clock and in the case of a s3c6410 compatible controller, also + a source clock. +- clock-names: Must contain "rtc" and for a s3c6410 compatible controller, + a "rtc_src" sorted in the same order as the clocks property. Example: |