diff options
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog')
7 files changed, 138 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml index f84c45d687d7..47701248cd8d 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol +title: i.MX SCU Client Device Node - Watchdog Based on SCU Message Protocol maintainers: - Dong Aisheng <aisheng.dong@nxp.com> diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt deleted file mode 100644 index 198794963786..000000000000 --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt +++ /dev/null @@ -1,28 +0,0 @@ -* GPIO-controlled Watchdog - -Required Properties: -- compatible: Should contain "linux,wdt-gpio". -- gpios: From common gpio binding; gpio connection to WDT reset pin. -- hw_algo: The algorithm used by the driver. Should be one of the - following values: - - toggle: Either a high-to-low or a low-to-high transition clears - the WDT counter. The watchdog timer is disabled when GPIO is - left floating or connected to a three-state buffer. - - level: Low or high level starts counting WDT timeout, - the opposite level disables the WDT. Active level is determined - by the GPIO flags. -- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds). - -Optional Properties: -- always-running: If the watchdog timer cannot be disabled, add this flag to - have the driver keep toggling the signal without a client. It will only cease - to toggle the signal when the device is open and the timeout elapsed. - -Example: - watchdog: watchdog { - /* ADM706 */ - compatible = "linux,wdt-gpio"; - gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1600>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml new file mode 100644 index 000000000000..50af79af6416 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/linux,wdt-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-controlled Watchdog + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: linux,wdt-gpio + + gpios: + description: gpio connection to WDT reset pin + maxItems: 1 + + hw_algo: + description: The algorithm used by the driver. + enum: [ level, toggle ] + + hw_margin_ms: + description: Maximum time to reset watchdog circuit (milliseconds). + $ref: /schemas/types.yaml#/definitions/uint32 + + always-running: + type: boolean + description: + If the watchdog timer cannot be disabled, add this flag to have the driver + keep toggling the signal without a client. + It will only cease to toggle the signal when the device is open and the + timeout elapsed. + +required: + - compatible + - gpios + - hw_algo + - hw_margin_ms + +allOf: + - $ref: watchdog.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <1600>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml new file mode 100644 index 000000000000..b3605608410c --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/mediatek,mtk-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoCs Watchdog timer + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + The watchdog supports a pre-timeout interrupt that fires + timeout-sec/2 before the expiry. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2712-wdt + - mediatek,mt6589-wdt + - mediatek,mt6795-wdt + - mediatek,mt7986-wdt + - mediatek,mt8183-wdt + - mediatek,mt8186-wdt + - mediatek,mt8188-wdt + - mediatek,mt8192-wdt + - mediatek,mt8195-wdt + - items: + - enum: + - mediatek,mt2701-wdt + - mediatek,mt6582-wdt + - mediatek,mt6797-wdt + - mediatek,mt7622-wdt + - mediatek,mt7623-wdt + - mediatek,mt7629-wdt + - mediatek,mt8173-wdt + - mediatek,mt8516-wdt + - const: mediatek,mt6589-wdt + + reg: + maxItems: 1 + + interrupts: + items: + - description: Watchdog pre-timeout (bark) interrupt + + mediatek,disable-extrst: + description: Disable sending output reset signal + type: boolean + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8183-wdt"; + reg = <0 0x10007000 0 0x100>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; + mediatek,disable-extrst; + timeout-sec = <10>; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt deleted file mode 100644 index 762c62e428ef..000000000000 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ /dev/null @@ -1,42 +0,0 @@ -Mediatek SoCs Watchdog timer - -The watchdog supports a pre-timeout interrupt that fires timeout-sec/2 -before the expiry. - -Required properties: - -- compatible should contain: - "mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701 - "mediatek,mt2712-wdt": for MT2712 - "mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582 - "mediatek,mt6589-wdt": for MT6589 - "mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797 - "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622 - "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623 - "mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629 - "mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986 - "mediatek,mt8183-wdt": for MT8183 - "mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186 - "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516 - "mediatek,mt8192-wdt": for MT8192 - "mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195 - -- reg : Specifies base physical address and size of the registers. - -Optional properties: -- mediatek,disable-extrst: disable send output reset signal -- interrupts: Watchdog pre-timeout (bark) interrupt. -- timeout-sec: contains the watchdog timeout in seconds. -- #reset-cells: Should be 1. - -Example: - -watchdog: watchdog@10007000 { - compatible = "mediatek,mt8183-wdt", - "mediatek,mt6589-wdt"; - mediatek,disable-extrst; - reg = <0 0x10007000 0 0x100>; - interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; - timeout-sec = <10>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml index 39736449ba64..a8e266f80c20 100644 --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/st,stm32-iwdg.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings +title: STMicroelectronics STM32 Independent WatchDoG (IWDG) maintainers: - Yannick Fertre <yannick.fertre@foss.st.com> diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index e3dfb02f0ca5..fccae0d00110 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/watchdog.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Watchdog Generic Bindings +title: Watchdog Common Properties maintainers: - Guenter Roeck <linux@roeck-us.net> |