diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
8 files changed, 84 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 4d46c49ec32b..50de0da42c13 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -95,4 +95,3 @@ examples: reg = <0>; }; }; - diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml index 54b6f15eca18..8a9d526d06eb 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml @@ -52,4 +52,3 @@ examples: spi-max-frequency = <40000000>; }; }; - diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 44d08aa3fd85..b622bb7363ec 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -8,8 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI) maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> description: The QSPI controller allows SPI protocol communication in single, dual, or quad wire transmission modes for read/write access to slaves such diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt deleted file mode 100644 index 5c090771c016..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ /dev/null @@ -1,103 +0,0 @@ -Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP core is an AHB slave that provides a common data path (an output FIFO -and an input FIFO) for serial peripheral interface (SPI) mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Should contain: - "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. - "qcom,spi-qup-v2.1.1" for 8974 and later - "qcom,spi-qup-v2.2.1" for 8974 v2 and later. - -- reg: Should contain base register location and length -- interrupts: Interrupt number used by this controller - -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -- #address-cells: Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. -- #size-cells: Should be zero. - -Optional properties: -- spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -- num-cs: total number of chipselects -- cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child - nodes. If unspecified, a single SPI device without a chip - select can be used. - -- dmas: Two DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - spi_8: spi@f9964000 { /* BLSP2 QUP2 */ - - compatible = "qcom,spi-qup-v2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xf9964000 0x1000>; - interrupts = <0 102 0>; - spi-max-frequency = <19200000>; - - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; - dma-names = "rx", "tx"; - - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - - device@0 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <19200000>; - spi-cpol; - }; - - device@1 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <9600000>; - spi-cpha; - }; - - device@2 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2>; /* Chip select 2 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - }; - - device@3 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <3>; /* Chip select 3 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - spi-cs-high; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml new file mode 100644 index 000000000000..93f14dd01afc --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The QUP core is an AHB slave that provides a common data path (an output FIFO + and an input FIFO) for serial peripheral interface (SPI) mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,spi-qup-v2.1.1 # for 8974 and later + - qcom,spi-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml index c0eccf703039..bab5d4b7fc3d 100644 --- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml @@ -56,4 +56,3 @@ examples: #address-cells = <1>; #size-cells = <0>; }; - diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index 200c7fc7b089..f012888656ec 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -78,7 +78,7 @@ spi0:spi@20bf0000 { interrupts = <338>; clocks = <&clkspi>; - flash: n25q032@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32"; diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index bda45ff3d294..0e382119c64f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -143,7 +143,7 @@ examples: <&dma_controller 24 0>; dma-names = "rx", "tx"; - m25p80@1 { + flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; |