1 files changed, 0 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
deleted file mode 100644
index 421722b93992..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Device tree configuration for Renesas RSPI/QSPI driver
-
-Required properties:
-- compatible       : For Renesas Serial Peripheral Interface on legacy SH:
-		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
-		     For Renesas Serial Peripheral Interface on RZ/A:
-		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
-		     For Quad Serial Peripheral Interface on R-Car Gen2 and
-		     RZ/G1 devices:
-		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
-		     Examples with soctypes are:
-		        - "renesas,rspi-sh7757" (SH)
-			- "renesas,rspi-r7s72100" (RZ/A1H)
-			- "renesas,rspi-r7s9210" (RZ/A2)
-			- "renesas,qspi-r8a7743" (RZ/G1M)
-			- "renesas,qspi-r8a7744" (RZ/G1N)
-			- "renesas,qspi-r8a7745" (RZ/G1E)
-			- "renesas,qspi-r8a77470" (RZ/G1C)
-			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2-W)
-			- "renesas,qspi-r8a7792" (R-Car V2H)
-			- "renesas,qspi-r8a7793" (R-Car M2-N)
-			- "renesas,qspi-r8a7794" (R-Car E2)
-- reg              : Address start and address range size of the device
-- interrupts       : A list of interrupt-specifiers, one for each entry in
-		     interrupt-names.
-		     If interrupt-names is not present, an interrupt specifier
-		     for a single muxed interrupt.
-- interrupt-names  : A list of interrupt names. Should contain (if present):
-		       - "error" for SPEI,
-		       - "rx" for SPRI,
-		       - "tx" to SPTI,
-		       - "mux" for a single muxed interrupt.
-- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Optional properties:
-- clocks           : Must contain a reference to the functional clock.
-- dmas             : Must contain a list of two references to DMA specifiers,
-		     one for transmission, and one for reception.
-- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Examples:
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		interrupt-parent = <&gic>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	spi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
-	};