diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
40 files changed, 1122 insertions, 162 deletions
diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt b/Documentation/devicetree/bindings/sound/adi,adau17x1.txt index 8dbce0e18dda..1447dec28125 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau17x1.txt +++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.txt @@ -13,6 +13,11 @@ Required properties: - reg: The i2c address. Value depends on the state of ADDR0 and ADDR1, as wired in hardware. +Optional properties: + - clock-names: If provided must be "mclk". + - clocks: phandle + clock-specifiers for the clock that provides + the audio master clock for the device. + Examples: #include <dt-bindings/sound/adau17x1.h> @@ -20,5 +25,8 @@ Examples: adau1361@38 { compatible = "adi,adau1761"; reg = <0x38>; + + clock-names = "mclk"; + clocks = <&audio_clock>; }; }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.txt b/Documentation/devicetree/bindings/sound/adi,adau7002.txt new file mode 100644 index 000000000000..f144ee1abf85 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau7002.txt @@ -0,0 +1,19 @@ +Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter + +Required properties: + + - compatible: Must be "adi,adau7002" + +Optional properties: + + - IOVDD-supply: Phandle and specifier for the power supply providing the IOVDD + supply as covered in Documentation/devicetree/bindings/regulator/regulator.txt + + If this property is not present it is assumed that the supply pin is + hardwired to always on. + +Example: + adau7002: pdm-to-i2s { + compatible = "adi,adau7002"; + IOVDD-supply = <&supply>; + }; diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 000000000000..b139e66d2a11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,67 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - assigned-clocks: PLL and leaf clocks + - assigned-clock-parents: parent clocks of the assigned clocks + (usually the PLL) + - assigned-clock-rates: List of clock frequencies of the + assigned clocks + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + +Example: + cygnus_audio: audio@180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>; + assigned-clock-rates = <1769470191>, + <0>, + <0>, + <0>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + ssp0: ssp_port@0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port@1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port@2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port@3 { + reg = <3>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/bt-sco.txt b/Documentation/devicetree/bindings/sound/bt-sco.txt index 29b8e5d40203..641edf75e184 100644 --- a/Documentation/devicetree/bindings/sound/bt-sco.txt +++ b/Documentation/devicetree/bindings/sound/bt-sco.txt @@ -4,7 +4,7 @@ This device support generic Bluetooth SCO link. Required properties: - - compatible : "delta,dfbmcs320" + - compatible : "delta,dfbmcs320" or "linux,bt-sco" Example: diff --git a/Documentation/devicetree/bindings/sound/cs35l33.txt b/Documentation/devicetree/bindings/sound/cs35l33.txt new file mode 100644 index 000000000000..acfb47525b49 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs35l33.txt @@ -0,0 +1,126 @@ +CS35L33 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l33" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : gpio used to reset the amplifier + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS35L33 are delivered to. + - interrupts : IRQ line info CS35L33. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,boost-ctl : Booster voltage use to supply the amp. If the value is + 0, then VBST = VP. If greater than 0, the boost voltage will be 3300mV with + a value of 1 and will increase at a step size of 100mV until a maximum of + 8000mV. + + - cirrus,ramp-rate : On power up, it affects the time from when the power + up sequence begins to the time the audio reaches a full-scale output. + On power down, it affects the time from when the power-down sequence + begins to when the amplifier disables the PWM outputs. If this property + is not set then soft ramping will be disabled and ramp time would be + 20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms, + 60ms,100ms,175ms respectively for 48KHz sample rate. + + - cirrus,boost-ipk : The maximum current allowed for the boost converter. + The range starts at 1850000uA and goes to a maximum of 3600000uA + with a step size of 15625uA. The default is 2500000uA. + + - cirrus,imon-adc-scale : Configures the scaling of data bits from the IMON + ADC data word. This property can be set as a value of 0 for bits 15 down + to 0, 6 for 21 down to 6, 7, for 22 down to 7, 8 for 23 down to 8. + + +Optional H/G Algorithm sub-node: + +The cs35l33 node can have a single "cirrus,hg-algo" sub-node that will enable +the internal H/G Algorithm. + + - cirrus,hg-algo : Sub-node for internal Class H/G algorithm that + controls the amplifier supplies. + +Optional properties for the "cirrus,hg-algo" sub-node: + + - cirrus,mem-depth : Memory depth for the Class H/G algorithm measured in + LRCLK cycles. If this property is set to 0, 1, 2, or 3 then the memory + depths will be 1, 4, 8, 16 LRCLK cycles. The default is 16 LRCLK cycles. + + cirrus,release-rate : The number of consecutive LRCLK periods before + allowing release condition tracking updates. The number of LRCLK periods + start at 3 to a maximum of 255. + + - cirrus,ldo-thld : Configures the signal threshold at which the PWM output + stage enters LDO operation. Starts as a default value of 50mV for a value + of 1 and increases with a step size of 50mV to a maximum of 750mV (value of + 0xF). + + - cirrus,ldo-path-disable : This is a boolean property. If present, the H/G + algorithm uses the max detection path. If not present, the LDO + detection path is used. + + - cirrus,ldo-entry-delay : The LDO entry delay in milliseconds before the H/G + algorithm switches to the LDO voltage. This property can be set to values + from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms. + The default is 100ms. + + - cirrus,vp-hg-auto : This is a boolean property. When set, class H/G VPhg + automatic updating is enabled. + + - cirrus,vp-hg : Class H/G algorithm VPhg. Controls the H/G algorithm's + reference to the VP voltage for when to start generating a boosted VBST. + The reference voltage starts at 3000mV with a value of 0x3 and is increased + by 100mV per step to a maximum of 5500mV. + + - cirrus,vp-hg-rate : The rate (number of LRCLK periods) at which the VPhg is + allowed to increase to a higher voltage when using VPhg automatic + tracking. This property can be set to values from 0 to 3 with rates of 128 + periods, 2048 periods, 32768 periods, and 524288 periods. + The default is 32768 periods. + + - cirrus,vp-hg-va : VA calculation reference for automatic VPhg tracking + using VPMON. This property can be set to values from 0 to 6 starting at + 1800mV with a step size of 50mV up to a maximum value of 1750mV. + Default is 1800mV. + +Example: + +cs35l33: cs35l33@40 { + compatible = "cirrus,cs35l33"; + reg = <0x40>; + + VA-supply = <&ldo5_reg>; + VP-supply = <&ldo5_reg>; + + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&cs47l91 34 0>; + + cirrus,ramp-rate = <0x0>; + cirrus,boost-ctl = <0x30>; /* VBST = 8000mV */ + cirrus,boost-ipk = <0xE0>; /* 3600mA */ + cirrus,imon-adc-scale = <0> /* Bits 15 down to 0 */ + + cirrus,hg-algo { + cirrus,mem-depth = <0x3>; + cirrus,release-rate = <0x3>; + cirrus,ldo-thld = <0x1>; + cirrus,ldo-path-disable = <0x0>; + cirrus,ldo-entry-delay=<0x4>; + cirrus,vp-hg-auto; + cirrus,vp-hg=<0xF>; + cirrus,vp-hg-rate=<0x2>; + cirrus,vp-hg-va=<0x0>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt new file mode 100644 index 000000000000..4dbfb8274cd9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -0,0 +1,44 @@ +CS53L30 audio CODEC + +Required properties: + + - compatible : "cirrus,cs53l30" + + - reg : the I2C address of the device + + - VA-supply, VP-supply : power supplies for the device, + as covered in Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + + - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either + GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled + by the driver automatically. + + - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin. + 0 = Hi-Z + 1 = 1.80 V + 2 = 2.75 V + + - cirrus,use-sdout2 : This is a boolean property. If present, it indicates + the hardware design connects both SDOUT1 and SDOUT2 + pins to output data. Otherwise, it indicates that + only SDOUT1 is connected for data output. + * CS53l30 supports 4-channel data output in the same + * frame using two different ways: + * 1) Normal I2S mode on two data pins -- each SDOUT + * carries 2-channel data in the same time. + * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 4-channel data per frame. + +Example: + +codec: cs53l30@48 { + compatible = "cirrus,cs53l30"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; + VA-supply = <&cs53l30_va>; + VP-supply = <&cs53l30_vp>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt new file mode 100644 index 000000000000..55b53e1fd72c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt @@ -0,0 +1,51 @@ +Texas Instruments DaVinci McBSP module +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This binding describes the "Multi-channel Buffered Serial Port" (McBSP) +audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x. + + +Required properties: +~~~~~~~~~~~~~~~~~~~~ +- compatible : + "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms + +- reg : physical base address and length of the controller memory mapped + region(s). +- reg-names : Should contain: + * "mpu" for the main registers (required). + * "dat" for the data FIFO (optional). + +- dmas: three element list of DMA controller phandles, DMA request line and + TC channel ordered triplets. +- dma-names: identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. The dma + identifiers must be "rx" and "tx". + +Optional properties: +~~~~~~~~~~~~~~~~~~~~ +- interrupts : Interrupt numbers for McBSP +- interrupt-names : Known interrupt names are "rx" and "tx" + +- pinctrl-0: Should specify pin control group used for this controller. +- pinctrl-names: Should contain only one value - "default", for more details + please refer to pinctrl-bindings.txt + +Example (AM1808): +~~~~~~~~~~~~~~~~~ + +mcbsp0: mcbsp@1d10000 { + compatible = "ti,da850-mcbsp"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp0_pins>; + + reg = <0x00110000 0x1000>, + <0x00310000 0x1000>; + reg-names = "mpu", "dat"; + interrupts = <97 98>; + interrupts-names = "rx", "tx"; + dmas = <&edma0 3 1 + &edma0 2 1>; + dma-names = "tx", "rx"; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt index 7bb54247f8e8..6a536d570e29 100644 --- a/Documentation/devicetree/bindings/sound/designware-i2s.txt +++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt @@ -12,6 +12,10 @@ Required properties: one for receive. - dma-names : "tx" for the transmit channel, "rx" for the receive channel. +Optional properties: + - interrupts: The interrupt line number for the I2S controller. Add this + parameter if the I2S controller that you are using does not support DMA. + For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties please check: * resource-names.txt diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index ceaef5126989..f749e2744824 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -58,7 +58,7 @@ Required properties: * DMIC (stands for Digital Microphone Jack) Note: The "Mic Jack" and "AMIC" are redundant while - coexsiting in order to support the old bindings + coexisting in order to support the old bindings of wm8962 and sgtl5000. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 044e5d76e2dd..740b467adf7d 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -7,8 +7,8 @@ codec/DSP interfaces. Required properties: - - compatible : Compatible list, contains "fsl,vf610-sai" or - "fsl,imx6sx-sai". + - compatible : Compatible list, contains "fsl,vf610-sai", + "fsl,imx6sx-sai" or "fsl,imx6ul-sai" - reg : Offset and length of the register set for the device. @@ -48,6 +48,11 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately. +Optional properties (for mx6ul): + + - fsl,sai-mclk-direction-output: This is a boolean property. If present, + indicates that SAI will output the SAI MCLK clock. + Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt new file mode 100644 index 000000000000..6c285235e64b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98371.txt @@ -0,0 +1,17 @@ +max98371 codec + +This device supports I2C mode only. + +Required properties: + +- compatible : "maxim,max98371" +- reg : The chip select number on the I2C bus + +Example: + +&i2c { + max98371: max98371@0x31 { + compatible = "maxim,max98371"; + reg = <0x31>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt new file mode 100644 index 000000000000..583ed5fdfb28 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98504.txt @@ -0,0 +1,44 @@ +Maxim MAX98504 class D mono speaker amplifier + +This device supports I2C control interface and an IRQ output signal. It features +a PCM and PDM digital audio interface (DAI) and a differential analog input. + +Required properties: + + - compatible : "maxim,max98504" + - reg : should contain the I2C slave device address + - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device, + as covered in ../regulator/regulator.txt + - interrupts : should specify the interrupt line the device is connected to, + as described in ../interrupt-controller/interrupts.txt + +Optional properties: + + - maxim,brownout-threshold - the PVDD brownout threshold, the value must be + from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range + - maxim,brownout-attenuation - the brownout attenuation to the speaker gain + applied during the "attack hold" and "timed hold" phase, the value must be + from 0...6 (dB) range + - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms, + 0...255 (VBATBROWN_ATTK_HOLD, register 0x0018) + - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms, + 0...255 (VBATBROWN_TIME_HOLD, register 0x0019) + - maxim,brownout-release-rate-ms - the brownout release phase step time in ms, + 0...255 (VBATBROWN_RELEASE, register 0x001A) + +The default value when the above properties are not specified is 0, +the maxim,brownout-threshold property must be specified to actually enable +the PVDD brownout protection. + +Example: + + max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + interrupt-parent = <&gpio_bank_0>; + interrupts = <2 0>; + + DVDD-supply = <®ulator>; + DIOVDD-supply = <®ulator>; + PVDD-supply = <®ulator>; +}; diff --git a/Documentation/devicetree/bindings/sound/max9860.txt b/Documentation/devicetree/bindings/sound/max9860.txt new file mode 100644 index 000000000000..e0d4e95e31b3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max9860.txt @@ -0,0 +1,28 @@ +MAX9860 Mono Audio Voice Codec + +Required properties: + + - compatible : "maxim,max9860" + + - reg : the I2C address of the device + + - AVDD-supply, DVDD-supply and DVDDIO-supply : power supplies for + the device, as covered in bindings/regulator/regulator.txt + + - clock-names : Required element: "mclk". + + - clocks : A clock specifier for the clock connected as MCLK. + +Examples: + + max9860: max9860@10 { + compatible = "maxim,max9860"; + reg = <0x10>; + + AVDD-supply = <®_1v8>; + DVDD-supply = <®_1v8>; + DVDDIO-supply = <®_3v0>; + + clock-names = "mclk"; + clocks = <&pck2>; + }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt new file mode 100644 index 000000000000..3e623a724e55 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -0,0 +1,150 @@ +Mediatek AFE PCM controller for mt2701 + +Required properties: +- compatible = "mediatek,mt2701-audio"; +- reg: register location and size +- interrupts: Should contain AFE interrupt +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + +Example: + + afe: mt2701-afe-pcm@11220000 { + compatible = "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112A0000 0 0x20000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt new file mode 100644 index 000000000000..05574446ceb6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt @@ -0,0 +1,43 @@ +MT2701 with CS42448 CODEC + +Required properties: +- compatible: "mediatek,mt2701-cs42448-machine" +- mediatek,platform: the phandle of MT2701 ASoC platform +- audio-routing: a list of the connections between audio +- mediatek,audio-codec: the phandles of cs42448 codec +- mediatek,audio-codec-bt-mrg the phandles of bt-sco dummy codec +- pinctrl-names: Should contain only one value - "default" +- pinctrl-0: Should specify pin control groups used for this controller. +- i2s1-in-sel-gpio1, i2s1-in-sel-gpio2: Should specify two gpio pins to + control I2S1-in mux. + +Example: + + sound:sound { + compatible = "mediatek,mt2701-cs42448-machine"; + mediatek,platform = <&afe>; + /* CS42448 Machine name */ + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "AMIC", + "AIN1R", "AMIC", + "AIN2L", "Tuner In", + "AIN2R", "Tuner In", + "AIN3L", "Satellite Tuner In", + "AIN3R", "Satellite Tuner In", + "AIN3L", "AUX In", + "AIN3R", "AUX In"; + mediatek,audio-codec = <&cs42448>; + mediatek,audio-codec-bt-mrg = <&bt_sco_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + i2s1-in-sel-gpio1 = <&pio 53 0>; + i2s1-in-sel-gpio2 = <&pio 54 0>; + }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt index f205ce9e31dd..ac28cdb4910e 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -1,15 +1,16 @@ -MT8173 with RT5650 RT5676 CODECS +MT8173 with RT5650 RT5676 CODECS and HDMI via I2S Required properties: - compatible : "mediatek,mt8173-rt5650-rt5676" - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs + and of the hdmi encoder node - mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-rt5650-rt5676"; - mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,audio-codec = <&rt5650 &rt5676 &hdmi0>; mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt index fe5a5ef1714d..29dce2ac8773 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt @@ -1,15 +1,31 @@ -MT8173 with RT5650 CODECS +MT8173 with RT5650 CODECS and HDMI via I2S Required properties: - compatible : "mediatek,mt8173-rt5650" - mediatek,audio-codec: the phandles of rt5650 codecs + and of the hdmi encoder node - mediatek,platform: the phandle of MT8173 ASoC platform +Optional subnodes: +- codec-capture : the subnode of rt5650 codec capture +Required codec-capture subnode properties: +- sound-dai: audio codec dai name on capture path + <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1) + <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2) + +- mediatek,mclk: the MCLK source + 0 : external oscillator, MCLK = 12.288M + 1 : internal source from mt8173, MCLK = sampling rate*256 + Example: sound { compatible = "mediatek,mt8173-rt5650"; - mediatek,audio-codec = <&rt5650>; + mediatek,audio-codec = <&rt5650 &hdmi0>; mediatek,platform = <&afe>; + mediatek,mclk = <0>; + codec-capture { + sound-dai = <&rt5650 1>; + }; }; diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt new file mode 100644 index 000000000000..05830e477acd --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8810.txt @@ -0,0 +1,16 @@ +NAU8810 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8810" + + - reg : the I2C address of the device. + +Example: + +codec: nau8810@1a { + compatible = "nuvoton,nau8810"; + reg = <0x1a>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt new file mode 100644 index 000000000000..5da7da4ea07a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt @@ -0,0 +1,42 @@ +NVIDIA Tegra audio complex, with SGTL5000 CODEC + +Required properties: +- compatible : "nvidia,tegra-audio-sgtl5000" +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the SGTL5000's pins (as documented in its binding), and the jacks + on the board: + + * Headphone Jack + * Line In Jack + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's + connected to the CODEC. +- nvidia,audio-codec : The phandle of the SGTL5000 audio codec. + +Example: + +sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index 275c6ea356f6..44d27456e8a4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -15,7 +15,7 @@ Required properties: Example: -hda@0,70030000 { +hda@70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt new file mode 100644 index 000000000000..c63ab0b6ee19 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm5102a.txt @@ -0,0 +1,13 @@ +PCM5102a audio CODECs + +These devices does not use I2C or SPI. + +Required properties: + + - compatible : set as "ti,pcm5102a" + +Examples: + + pcm5102a: pcm5102a { + compatible = "ti,pcm5102a"; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index 48129368d4d9..d9d8635ff94c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -16,6 +16,24 @@ Required properties: * "spkr-iomux" - qcom,model : Name of the sound card. +- qcom,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, MicBias + of msm8x16_wcd codec and the jacks on the board: + + Power supplies: + * MIC BIAS External1 + * MIC BIAS External2 + * MIC BIAS Internal1 + * MIC BIAS Internal2 + + Board connectors: + * Headset Mic + * Secondary Mic", + * DMIC + * Ext Spk + Dai-link subnode properties and subnodes: Required dai-link subnodes: @@ -37,6 +55,18 @@ sound: sound { reg-names = "mic-iomux", "spkr-iomux"; qcom,model = "DB410c"; + qcom,audio-routing = + "MIC BIAS External1", "Handset Mic", + "MIC BIAS Internal2", "Headset Mic", + "MIC BIAS External1", "Secondary Mic", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1", + "DMIC1", "MIC BIAS Internal1", + "MIC BIAS Internal1", "Digital Mic1", + "DMIC2", "MIC BIAS Internal1", + "MIC BIAS Internal1", "Digital Mic2"; + /* I2S - Internal codec */ internal-dai-link@0 { cpu { /* PRIMARY */ diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index c7b29df4a963..15a7316e4c91 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -373,6 +373,8 @@ Optional properties: - #clock-cells : it must be 0 if your system has audio_clkout it must be 1 if your system has audio_clkout0/1/2/3 - clock-frequency : for all audio_clkout0/1/2/3 +- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn + is asynchronizes with lr-clock. SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt deleted file mode 100644 index 255ece3043ad..000000000000 --- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ /dev/null @@ -1,75 +0,0 @@ -Renesas Sampling Rate Convert Sound Card: - -Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC <-> codec. - -Required properties: - -- compatible : "renesas,rsrc-card{,<board>}" - Examples with boards are: - - "renesas,rsrc-card" - - "renesas,rsrc-card,lager" - - "renesas,rsrc-card,koelsch" -Optional properties: - -- card_name : User specified audio sound card name, one string - property. -- cpu : CPU sub-node -- codec : CODEC sub-node - -Optional subnode properties: - -- format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" -- frame-master : Indicates dai-link frame master. - phandle to a cpu or codec subnode. -- bitclock-master : Indicates dai-link bit clock master. - phandle to a cpu or codec subnode. -- bitclock-inversion : bool property. Add this if the - dai-link uses bit clock inversion. -- frame-inversion : bool property. Add this if the - dai-link uses frame clock inversion. -- convert-rate : platform specified sampling rate convert -- convert-channels : platform specified converted channel size (2 - 8 ch) -- audio-prefix : see audio-routing -- audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources. - use audio-prefix if some components is using same sink/sources naming. - it can be used if compatible was "renesas,rsrc-card"; - -Required CPU/CODEC subnodes properties: - -- sound-dai : phandle and port of CPU/CODEC - -Optional CPU/CODEC subnodes properties: - -- clocks / system-clock-frequency : specify subnode's clock if needed. - it can be specified via "clocks" if system has - clock node (= common clock), or "system-clock-frequency" - (if system doens't support common clock) - If a clock is specified, it is - enabled with clk_prepare_enable() - in dai startup() and disabled with - clk_disable_unprepare() in dai - shutdown(). - -Example - -sound { - compatible = "renesas,rsrc-card,lager"; - - card-name = "rsnd-ak4643"; - format = "left_j"; - bitclock-master = <&sndcodec>; - frame-master = <&sndcodec>; - - sndcpu: cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: codec { - sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt new file mode 100644 index 000000000000..eac91db07178 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt @@ -0,0 +1,22 @@ +ROCKCHIP with MAX98357A/RT5514/DA7219 codecs on GRU boards + +Required properties: +- compatible: "rockchip,rk3399-gru-sound" +- rockchip,cpu: The phandle of the Rockchip I2S controller that's + connected to the codecs +- rockchip,codec: The phandle of the MAX98357A/RT5514/DA7219 codecs + +Optional properties: +- dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready. + If this option is specified, which means it's required dmic need + delay for DMIC to ready so that rt5514 can avoid recording before + DMIC send valid data + +Example: + +sound { + compatible = "rockchip,rk3399-gru-sound"; + rockchip,cpu = <&i2s0>; + rockchip,codec = <&max98357a &rt5514 &da7219>; + dmic-wakeup-delay-ms = <20>; +}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 6e86d8aa29b4..4ea29aa9af59 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -23,6 +23,11 @@ Required properties: - rockchip,playback-channels: max playback channels, if not set, 8 channels default. - rockchip,capture-channels: max capture channels, if not set, 2 channels default. +Required properties for controller which support multi channels +playback/capture: + +- rockchip,grf: the phandle of the syscon node for GRF register. + Example for rk3288 I2S controller: i2s@ff890000 { diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index e24436fc5ea9..9cabfc18cb57 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -8,6 +8,11 @@ Required properties: - reg : The I2C address of the device. +Optional properties: + +- clocks: The phandle of the master clock to the CODEC +- clock-names: Should be "mclk" + Pins on the device (for linking into audio routes) for RT5514: * DMIC1L diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 5f79e7fde032..1766e0543fc5 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -12,6 +12,9 @@ Required properties: Optional properties: +- clocks: The phandle of the master clock to the CODEC +- clock-names: Should be "mclk" + - realtek,in1-differential - realtek,in3-differential - realtek,in4-differential diff --git a/Documentation/devicetree/bindings/sound/rt5660.txt b/Documentation/devicetree/bindings/sound/rt5660.txt new file mode 100644 index 000000000000..30be5f921930 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5660.txt @@ -0,0 +1,47 @@ +RT5660 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5660". + +- reg : The I2C address of the device. + +Optional properties: + +- clocks: The phandle of the master clock to the CODEC +- clock-names: Should be "mclk" + +- realtek,in1-differential +- realtek,in3-differential + Boolean. Indicate MIC1/3 input are differential, rather than single-ended. + +- realtek,poweroff-in-suspend + Boolean. If the codec will be powered off in suspend, the resume should be + added delay time for waiting codec power ready. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO2 pin as dmic1 data pin + 2: using IN1P pin as dmic1 data pin + +Pins on the device (for linking into audio routes) for RT5660: + + * DMIC L1 + * DMIC R1 + * IN1P + * IN1N + * IN2P + * IN3P + * IN3N + * SPO + * LOUTL + * LOUTR + +Example: + +rt5660 { + compatible = "realtek,rt5660"; + reg = <0x1c>; +}; diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt new file mode 100644 index 000000000000..7d3c974c6e2e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -0,0 +1,30 @@ +RT5663/RT5668 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5663" or "realtek,rt5668". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +Pins on the device (for linking into audio routes) for RT5663/RT5668: + + * IN1P + * IN1N + * IN2P + * IN2N + * HPOL + * HPOR + +Example: + +codec: rt5663@12 { + compatible = "realtek,rt5663"; + reg = <0x12>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt b/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt deleted file mode 100644 index 9148f72319e1..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt +++ /dev/null @@ -1,35 +0,0 @@ -Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec - -Required properties: - - compatible : "samsung,odroidx2-audio" - for Odroid X2 board, - "samsung,odroidu3-audio" - for Odroid U3 board - - samsung,model : the user-visible name of this sound complex - - samsung,i2s-controller : the phandle of the I2S controller - - samsung,audio-codec : the phandle of the MAX98090 audio codec - - samsung,audio-routing : a list of the connections between audio - components; each entry is a pair of strings, the first being the - connection's sink, the second being the connection's source; - valid names for sources and sinks are the MAX98090's pins (as - documented in its binding), and the jacks on the board - For Odroid X2: - * Headphone Jack - * Mic Jack - * DMIC - - For Odroid U3: - * Headphone Jack - * Speakers - -Example: - -sound { - compatible = "samsung,odroidu3-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,audio-codec = <&max98090>; - samsung,model = "Odroid-X2"; - samsung,audio-routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "IN1", "Mic Jack", - "Mic Jack", "MICBIAS"; -}; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 0e5e4eb3ef1b..5666da7b8605 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,6 +7,14 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off. @@ -15,17 +23,9 @@ Required properties: - micbias-voltage-m-volts : the bias voltage to be used in mVolts The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentionned or the value is unknown, then + If this node is not mentioned or the value is unknown, then the value is set to 1.25V. -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - Example: codec: sgtl5000@0a { diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index cf3979eb3578..c7a93931fad2 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -22,6 +22,8 @@ Optional properties: headphones are attached. - simple-audio-card,mic-det-gpio : Reference to GPIO that signals when a microphone is attached. +- simple-audio-card,aux-devs : List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. Optional subnodes: @@ -30,7 +32,7 @@ Optional subnodes: sub-nodes. This container may be omitted when the card has only one DAI link. See the examples and the - section bellow. + section below. Dai-link subnode properties and subnodes: @@ -162,3 +164,38 @@ sound { }; }; }; + +Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec +through TPA6130A2 amplifier to headphones: + +&i2c0 { + codec: tlv320dac3100@18 { + compatible = "ti,tlv320dac3100"; + ... + } + + amp: tpa6130a2@60 { + compatible = "ti,tpa6130a2"; + ... + } +} + +sound { + compatible = "simple-audio-card"; + ... + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&>; + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = ... + }; +}; diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt new file mode 100644 index 000000000000..d6fe47ed09af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -0,0 +1,110 @@ +ASoC simple SCU Sound Card + +Simple-Card specifies audio DAI connections of SoC <-> codec. + +Required properties: + +- compatible : "simple-scu-audio-card" + "renesas,rsrc-card" + +Optional properties: + +- simple-audio-card,name : User specified audio sound card name, one string + property. +- simple-audio-card,cpu : CPU sub-node +- simple-audio-card,codec : CODEC sub-node + +Optional subnode properties: + +- simple-audio-card,format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- simple-audio-card,frame-master : Indicates dai-link frame master. + phandle to a cpu or codec subnode. +- simple-audio-card,bitclock-master : Indicates dai-link bit clock master. + phandle to a cpu or codec subnode. +- simple-audio-card,bitclock-inversion : bool property. Add this if the + dai-link uses bit clock inversion. +- simple-audio-card,frame-inversion : bool property. Add this if the + dai-link uses frame clock inversion. +- simple-audio-card,convert-rate : platform specified sampling rate convert +- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) +- simple-audio-card,prefix : see audio-routing +- simple-audio-card,routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources. + use audio-prefix if some components is using same sink/sources naming. + it can be used if compatible was "renesas,rsrc-card"; + +Required CPU/CODEC subnodes properties: + +- sound-dai : phandle and port of CPU/CODEC + +Optional CPU/CODEC subnodes properties: + +- clocks / system-clock-frequency : specify subnode's clock if needed. + it can be specified via "clocks" if system has + clock node (= common clock), or "system-clock-frequency" + (if system doens't support common clock) + If a clock is specified, it is + enabled with clk_prepare_enable() + in dai startup() and disabled with + clk_disable_unprepare() in dai + shutdown(). + +Example 1. Sampling Rate Covert + +sound { + compatible = "simple-scu-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */ + + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4642 Capture"; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; +}; + +Example 2. 2 CPU 1 Codec + +sound { + compatible = "renesas,rsrc-card"; + + card-name = "rsnd-ak4643"; + format = "left_j"; + bitclock-master = <&dpcmcpu>; + frame-master = <&dpcmcpu>; + + convert-rate = <48000>; /* see audio_clk_a */ + + audio-prefix = "ak4642"; + audio-routing = "ak4642 Playback", "DAI0 Playback", + "ak4642 Playback", "DAI1 Playback"; + + dpcmcpu: cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + + cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + + codec { + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 028fa1c82f50..745dc62f76ea 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -11,7 +11,9 @@ Documentation/devicetree/bindings/sound/simple-card.txt. --------------------------------------- Required properties: - - compatible: "st,sti-uni-player" or "st,sti-uni-reader" + - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out", + "st,stih407-uni-player-dac", "st,stih407-uni-player-spdif", + "st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi", - st,syscfg: phandle to boot-device system configuration registers @@ -33,31 +35,37 @@ Required properties: "tx" for "st,sti-uni-player" compatibility "rx" for "st,sti-uni-reader" compatibility - - version: IP version integrated in SOC. - - - dai-name: DAI name that describes the IP. - Required properties ("st,sti-uni-player" compatibility only): - clocks: CPU_DAI IP clock source, listed in the same order than the CPU_DAI properties. - - uniperiph-id: internal SOC IP instance ID. - - - IP mode: IP working mode depending on associated codec. - "HDMI" connected to HDMI codec IP and IEC HDMI formats. - "SPDIF"connected to SPDIF codec and support SPDIF formats. - "PCM" PCM standard mode for I2S or TDM bus. - Optional properties: - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for external codecs connection. - pinctrl-names: should contain only one value - "default". + - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs. + Only compartible with IPs in charge of the external I2S/TDM bus. + Should be declared depending on associated codec. + Example: - sti_uni_player2: sti-uni-player@2 { - compatible = "st,sti-uni-player"; + sti_uni_player1: sti-uni-player@0x8D81000 { + compatible = "st,stih407-uni-player-hdmi"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_PCM_1>; + reg = <0x8D81000 0x158>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + dmas = <&fdma0 3 0 1>; + dma-names = "tx"; + st,tdm-mode = <1>; + }; + + sti_uni_player2: sti-uni-player@0x8D82000 { + compatible = "st,stih407-uni-player-pcm-out"; status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -65,15 +73,11 @@ Example: reg = <0x8D82000 0x158>; interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; dmas = <&fdma0 4 0 1>; - dai-name = "Uni Player #1 (DAC)"; dma-names = "tx"; - uniperiph-id = <2>; - version = <5>; - mode = "PCM"; }; - sti_uni_player3: sti-uni-player@3 { - compatible = "st,sti-uni-player"; + sti_uni_player3: sti-uni-player@0x8D85000 { + compatible = "st,stih407-uni-player-spdif"; status = "okay"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -82,14 +86,10 @@ Example: interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; dmas = <&fdma0 7 0 1>; dma-names = "tx"; - dai-name = "Uni Player #1 (PIO)"; - uniperiph-id = <3>; - version = <5>; - mode = "SPDIF"; }; - sti_uni_reader1: sti-uni-reader@1 { - compatible = "st,sti-uni-reader"; + sti_uni_reader1: sti-uni-reader@0x8D84000 { + compatible = "st,stih407-uni-reader-hdmi"; status = "disabled"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -97,8 +97,6 @@ Example: interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; dmas = <&fdma0 6 0 1>; dma-names = "rx"; - dai-name = "Uni Reader #1 (HDMI RX)"; - version = <3>; }; 2) sti-sas-codec: internal audio codec IPs driver @@ -152,4 +150,20 @@ Example of audio card declaration: sound-dai = <&sti_sasg_codec 0>; }; }; + simple-audio-card,dai-link@2 { + /* TDM playback */ + format = "left_j"; + frame-inversion = <1>; + cpu { + sound-dai = <&sti_uni_player1>; + dai-tdm-slot-num = <16>; + dai-tdm-slot-width = <16>; + dai-tdm-slot-tx-mask = + <1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>; + }; + + codec { + sound-dai = <&sti_sasg_codec 3>; + }; + }; }; diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt new file mode 100644 index 000000000000..7b526ec64991 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -0,0 +1,34 @@ +* Allwinner A10 I2S controller + +The I2S bus (Inter-IC sound bus) is a serial link for digital +audio data transfer between devices in the system. + +Required properties: + +- compatible: should be one of the followings + - "allwinner,sun4i-a10-i2s" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the I2S interrupt. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should include "tx" and "rx". +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should contain followings: + - "apb" : clock for the I2S bus interface + - "mod" : module clock for the I2S controller +- #sound-dai-cells : Must be equal to 0 + +Example: + +i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 13503aa505a9..0230c4d20506 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -9,6 +9,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC + - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC - reg : Offset and length of the register set for the device. @@ -25,6 +26,8 @@ Required properties: "apb" clock for the spdif bus. "spdif" clock for spdif controller. + - resets : reset specifier for the ahb reset (A31 and newer only) + Example: spdif: spdif@01c21000 { diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt index 0ac31d8d5ac4..b4959f10b74b 100644 --- a/Documentation/devicetree/bindings/sound/tas571x.txt +++ b/Documentation/devicetree/bindings/sound/tas571x.txt @@ -1,4 +1,4 @@ -Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers +Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers The codec is controlled through an I2C interface. It also has two other signals that can be wired up to GPIOs: reset (strongly recommended), and @@ -6,7 +6,11 @@ powerdown (optional). Required properties: -- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719" +- compatible: should be one of the following: + - "ti,tas5711", + - "ti,tas5717", + - "ti,tas5719", + - "ti,tas5721" - reg: The I2C address of the device - #sound-dai-cells: must be equal to 0 @@ -25,6 +29,8 @@ Optional properties: - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) +- DRVDD-supply: regulator phandle for the DRVDD supply (5721) +- PVDD-supply: regulator phandle for the PVDD supply (5721) Example: diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt new file mode 100644 index 000000000000..806ea7381483 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -0,0 +1,25 @@ +Texas Instruments TAS5720 Mono Audio amplifier + +The TAS5720 serial control bus communicates through the I2C protocol only. The +serial bus is also used for periodic codec fault checking/reporting during +audio playback. For more product information please see the links below: + +http://www.ti.com/product/TAS5720L +http://www.ti.com/product/TAS5720M + +Required properties: + +- compatible : "ti,tas5720" +- reg : I2C slave address +- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry +- pvdd-supply : phandle to a supply used for the Class-D amp and the analog + +Example: + +tas5720: tas5720@6c { + status = "okay"; + compatible = "ti,tas5720"; + reg = <0x6c>; + dvdd-supply = <&vdd_3v3_reg>; + pvdd-supply = <&_supply_reg>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index eff12be5e789..9340d2ddcc54 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -11,6 +11,7 @@ Required properties: "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP) "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP) "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP) + "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) - reg - <int> - I2C slave address - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, @@ -37,9 +38,11 @@ CODEC output pins: * MICBIAS CODEC input pins: - * MIC1LP - * MIC1RP - * MIC1LM + * MIC1LP, devices with ADC + * MIC1RP, devices with ADC + * MIC1LM, devices with ADC + * AIN1, devices without ADC + * AIN2, devices without ADC The pins can be used in referring sound node's audio-routing property. |