diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
-rw-r--r-- | Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt | 47 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt | 57 |
2 files changed, 104 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt new file mode 100644 index 000000000000..30942cf7992b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt @@ -0,0 +1,47 @@ +Raspberry Pi power domain driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-power". +- firmware: Reference to the RPi firmware device node. +- #power-domain-cells: Should be <1>, we providing multiple power domains. + +The valid defines for power domain are: + + RPI_POWER_DOMAIN_I2C0 + RPI_POWER_DOMAIN_I2C1 + RPI_POWER_DOMAIN_I2C2 + RPI_POWER_DOMAIN_VIDEO_SCALER + RPI_POWER_DOMAIN_VPU1 + RPI_POWER_DOMAIN_HDMI + RPI_POWER_DOMAIN_USB + RPI_POWER_DOMAIN_VEC + RPI_POWER_DOMAIN_JPEG + RPI_POWER_DOMAIN_H264 + RPI_POWER_DOMAIN_V3D + RPI_POWER_DOMAIN_ISP + RPI_POWER_DOMAIN_UNICAM0 + RPI_POWER_DOMAIN_UNICAM1 + RPI_POWER_DOMAIN_CCP2RX + RPI_POWER_DOMAIN_CSI2 + RPI_POWER_DOMAIN_CPI + RPI_POWER_DOMAIN_DSI0 + RPI_POWER_DOMAIN_DSI1 + RPI_POWER_DOMAIN_TRANSPOSER + RPI_POWER_DOMAIN_CCP2TX + RPI_POWER_DOMAIN_CDP + RPI_POWER_DOMAIN_ARM + +Example: + +power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; +}; + +Example for using power domain: + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt new file mode 100644 index 000000000000..401550487ed6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt @@ -0,0 +1,57 @@ +Wakeup M3 IPC Driver +===================== + +The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor +(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks +that cannot be controlled from the MPU, like suspend/resume and certain deep +C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver +to boot the wkup_m3, it handles communication with the CM3 using IPC registers +present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an +API to allow the SoC PM code to execute specific PM tasks. + +Wkup M3 Device Node: +==================== +A wkup_m3_ipc device node is used to represent the IPC registers within an +SoC. + +Required properties: +-------------------- +- compatible: Should be, + "ti,am3352-wkup-m3-ipc" for AM33xx SoCs + "ti,am4372-wkup-m3-ipc" for AM43xx SoCs +- reg: Contains the IPC register address space to communicate + with the Wakeup M3 processor +- interrupts: Contains the interrupt information for the wkup_m3 + interrupt that signals the MPU. +- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver + can boot it. +- mboxes: phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + +Example: +-------- +/* AM33xx */ + l4_wkup: l4_wkup@44c00000 { + ... + + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + ... + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + ... + }; + }; |