1 files changed, 0 insertions, 69 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
deleted file mode 100644
index 5a33619d881d..000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* Run Control and Power Management
--------------------------------------------
-The RCPM performs all device-level tasks associated with device run control
-and power management.
-
-Required properites:
-  - reg : Offset and length of the register set of the RCPM block.
-  - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
-	fsl,rcpm-wakeup property.
-  - compatible : Must contain a chip-specific RCPM block compatible string
-	and (if applicable) may contain a chassis-version RCPM compatible
-	string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
-	such as:
-	* "fsl,p2041-rcpm"
-	* "fsl,p5020-rcpm"
-	* "fsl,t4240-rcpm"
-
-	Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
-	such as:
-	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
-	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
-	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
-	* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-Chassis Version		Example Chips
----------------		-------------------------------
-1.0				p4080, p5020, p5040, p2041, p3041
-2.0				t4240, b4860, b4420
-2.1				t1040,
-2.1+				ls1021a, ls1012a, ls1043a, ls1046a
-
-Optional properties:
- - little-endian : RCPM register block is Little Endian. Without it RCPM
-   will be Big Endian (default case).
-
-Example:
-The RCPM node for T4240:
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
-		reg = <0xe2000 0x1000>;
-		#fsl,rcpm-wakeup-cells = <2>;
-	};
-
-* Freescale RCPM Wakeup Source Device Tree Bindings
--------------------------------------------
-Required fsl,rcpm-wakeup property should be added to a device node if the device
-can be used as a wakeup source.
-
-  - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
-	register cells. The number of IPPDEXPCR register cells is defined in
-	"#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
-	the bit mask that should be set in IPPDEXPCR0, and the second register
-	cell is for IPPDEXPCR1, and so on.
-
-	Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
-	mechanism for keeping certain blocks awake during STANDBY and MEM, in
-	order to use them as wake-up sources.
-
-Example:
-	lpuart0: serial@2950000 {
-		compatible = "fsl,ls1021a-lpuart";
-		reg = <0x0 0x2950000 0x0 0x1000>;
-		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sysclk>;
-		clock-names = "ipg";
-		fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
-	};