diff options
Diffstat (limited to 'Documentation/devicetree/bindings/serial')
5 files changed, 29 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index aeb6db4e35c3..da50321da34d 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -51,6 +51,7 @@ Optional properties: - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs +- overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. Note: * fsl,ns16550: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index 6bd3f2e93d61..21483ba820bc 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -8,6 +8,8 @@ Required properties: on LS1021A SoC with 32-bit big-endian register organization - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated on i.MX7ULP SoC with 32-bit little-endian register organization + - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated + on i.MX8QXP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt index 3acbd309ab9d..40e81a5818f6 100644 --- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt +++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt @@ -6,8 +6,23 @@ Required properties: - interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier depends on the interrupt-parent interrupt controller. +Optional properties: +- clocks: Should contain frequency clock and gate clock +- clock-names: Should be "freq" and "asc" + Example: +asc0: serial@16600000 { + compatible = "lantiq,asc"; + reg = <0x16600000 0x100000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>; + clock-names = "freq", "asc"; +}; + asc1: serial@e100c00 { compatible = "lantiq,asc"; reg = <0xE100C00 0x400>; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index e52e16c6bc57..20232ad05d89 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -24,6 +24,10 @@ Required properties: - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. + - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. + - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. + - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. + - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. @@ -61,13 +65,13 @@ Required properties: - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART, + - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, + - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, + - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, + - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART, + - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, + - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index b7c29f74ebb2..b92592dff6dd 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -16,7 +16,7 @@ Optional properties: - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 feature at boot time. It can be disabled later with proper ioctl. - rs485-rx-during-tx: empty property that enables the receiving of data even - whilst sending data. + while sending data. RS485 example for Atmel USART: usart0: serial@fff8c000 { |