1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
deleted file mode 100644
index e10502d9153e..000000000000
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Freescale i.MX7 System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:
-	- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
-	- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
-	- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt
-- #reset-cells: 1, see below
-
-example:
-
-src: reset-controller@30390000 {
-     compatible = "fsl,imx7d-src", "syscon";
-     reg = <0x30390000 0x2000>;
-     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-     #reset-cells = <1>;
-};
-
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset various set of
-peripherals. Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-Example:
-
-	pcie: pcie@33800000 {
-
-		...
-
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
-		reset-names = "pciephy", "apps";
-
-		...
-        };
-
-
-For list of all valid reset indices see
-<dt-bindings/reset/imx7-reset.h> for i.MX7,
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
-<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP