1 files changed, 0 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
deleted file mode 100644
index dd25e73b5d79..000000000000
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-GPIO controlled regulators
-
-Required properties:
-- compatible		: Must be "regulator-gpio".
-- regulator-name	: Defined in regulator.txt as optional, but required
-			  here.
-- gpios			: Array of one or more GPIO pins used to select the
-			  regulator voltage/current listed in "states".
-- states		: Selection of available voltages/currents provided by
-			  this regulator and matching GPIO configurations to
-			  achieve them. If there are no states in the "states"
-			  array, use a fixed regulator instead.
-
-Optional properties:
-- enable-gpios		: GPIO used to enable/disable the regulator.
-			  Warning, the GPIO phandle flags are ignored and the
-			  GPIO polarity is controlled solely by the presence
-			  of "enable-active-high" DT property. This is due to
-			  compatibility with old DTs.
-- enable-active-high	: Polarity of "enable-gpio" GPIO is active HIGH.
-			  Default is active LOW.
-- gpios-states		: On operating systems, that don't support reading back
-			  gpio values in output mode (most notably linux), this
-			  array provides the state of GPIO pins set when
-			  requesting them from the gpio controller. Systems,
-			  that are capable of preserving state when requesting
-			  the lines, are free to ignore this property.
-			  0: LOW, 1: HIGH. Default is LOW if nothing else
-			  is specified.
-- startup-delay-us	: Startup time in microseconds.
-- regulator-type	: Specifies what is being regulated, must be either
-			  "voltage" or "current", defaults to voltage.
-
-Any property defined as part of the core regulator binding defined in
-regulator.txt can also be used.
-
-Example:
-
-	mmciv: gpio-regulator {
-		compatible = "regulator-gpio";
-
-		regulator-name = "mmci-gpio-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2600000>;
-		regulator-boot-on;
-
-		enable-gpios = <&gpio0 23 0x4>;
-		gpios = <&gpio0 24 0x4
-			 &gpio0 25 0x4>;
-		states = <1800000 0x3
-			  2200000 0x2
-			  2600000 0x1
-			  2900000 0x0>;
-
-		startup-delay-us = <100000>;
-		enable-active-high;
-	};