diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply')
3 files changed, 170 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml index 0450f4dd4e51..1d2405bea109 100644 --- a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml @@ -16,18 +16,30 @@ maintainers: properties: compatible: - const: qcom,pm8941-coincell + oneOf: + - items: + - enum: + - qcom,pm8998-coincell + - const: qcom,pm8941-coincell + + - const: qcom,pm8941-coincell reg: maxItems: 1 qcom,rset-ohms: - description: resistance (in ohms) for current-limiting resistor + description: | + Resistance (in ohms) for current-limiting resistor. If unspecified, + inherit the previous configuration (e.g. from bootloader or hardware + default value). enum: [ 800, 1200, 1700, 2100 ] qcom,vset-millivolts: $ref: /schemas/types.yaml#/definitions/uint32 - description: voltage (in millivolts) to apply for charging + description: | + Voltage (in millivolts) to apply for charging. If unspecified, inherit + the previous configuration (e.g. from bootloader or hardware default + value). enum: [ 2500, 3000, 3100, 3200 ] qcom,charger-disable: @@ -37,8 +49,6 @@ properties: required: - compatible - reg - - qcom,rset-ohms - - qcom,vset-millivolts additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml new file mode 100644 index 000000000000..92c570643d2c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9467-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9467 Switching Battery Charger with Power Path Management + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + - ChiaEn Wu <chiaen_wu@richtek.com> + +description: | + RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for + portable applications. It integrates a synchronous PWM controller, power + MOSFETs, input current sensing and regulation, high-accuracy voltage + regulation, and charge termination. The charge current is regulated through + integrated sensing resistors. + + The RT9467 also features USB On-The-Go (OTG) support. It also integrates + D+/D- pin for USB host/charging port detection. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf + +properties: + compatible: + const: richtek,rt9467-charger + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + charge-enable-gpios: + description: GPIO is used to turn on and off charging. + maxItems: 1 + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + + properties: + enable-gpios: true + +required: + - compatible + - reg + - wakeup-source + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@5b { + compatible = "richtek,rt9467-charger"; + reg = <0x5b>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>; + + rt9467_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "rt9467-usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml new file mode 100644 index 000000000000..fbb54cfeca08 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9471.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9471 3A Single Cell Switching Battery charger + +maintainers: + - Alina Yu <alina_yu@richtek.com> + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT9471 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for + portable applications. It supports USB BC1.2 port detection, current and + voltage regulations in both charging and boost mode. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT9471=RT9471D/DS9471D-02.pdf + +properties: + compatible: + const: richtek,rt9471 + + reg: + maxItems: 1 + + charge-enable-gpios: + description: GPIO used to turn on and off charging. + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + usb-otg-vbus-regulator: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - wakeup-source + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@53 { + compatible = "richtek,rt9471"; + reg = <0x53>; + charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>; + + usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4850000>; + regulator-max-microvolt = <5300000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <1200000>; + }; + }; + }; |