1 files changed, 37 insertions, 38 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
index e03530091478..cc6d0c9c5100 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -10,8 +10,7 @@ maintainers:
   - Stephan Gerhold <stephan@gerhold.net>
 
 description: |
-  This binding describes the Top Level Mode Multiplexer (TLMM) block found
-  in the MSM8909 platform.
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC.
 
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
@@ -25,10 +24,10 @@ properties:
 
   interrupts: true
   interrupt-controller: true
-  '#interrupt-cells': true
+  "#interrupt-cells": true
   gpio-controller: true
   gpio-reserved-ranges: true
-  '#gpio-cells': true
+  "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
 
@@ -39,12 +38,13 @@ required:
 additionalProperties: false
 
 patternProperties:
-  '-state$':
+  "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-msm8909-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-msm8909-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-msm8909-tlmm-state:
@@ -52,7 +52,7 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -112,41 +112,40 @@ $defs:
 
     required:
       - pins
-      - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        pinctrl@1000000 {
-                compatible = "qcom,msm8909-tlmm";
-                reg = <0x1000000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 117>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx {
-                                pins = "gpio4";
-                                function = "blsp_uart1";
-                                bias-pull-up;
-                        };
-
-                        tx {
-                                pins = "gpio5";
-                                function = "blsp_uart1";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@1000000 {
+        compatible = "qcom,msm8909-tlmm";
+        reg = <0x1000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
 ...