diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt | 65 |
1 files changed, 53 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt index bfcf80341657..cf2cd86db267 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -1,16 +1,27 @@ -mvebu comphy driver -------------------- +MVEBU comphy drivers +-------------------- -A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It -provides a number of shared PHYs used by various interfaces (network, sata, -usb, PCIe...). +COMPHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 7k/8k (on the CP110) +* Armada 3700 +It provides a number of shared PHYs used by various interfaces (network, SATA, +USB, PCIe...). Required properties: -- compatible: should be "marvell,comphy-cp110" -- reg: should contain the comphy register location and length. -- marvell,system-controller: should contain a phandle to the - system controller node. +- compatible: should be one of: + * "marvell,comphy-cp110" for Armada 7k/8k + * "marvell,comphy-a3700" for Armada 3700 +- reg: should contain the COMPHY register(s) location(s) and length(s). + * 1 entry for Armada 7k/8k + * 4 entries for Armada 3700 along with the corresponding reg-names + properties, memory areas are: + * Generic COMPHY registers + * Lane 1 (PCIe/GbE) + * Lane 0 (USB3/GbE) + * Lane 2 (SATA/USB3) +- marvell,system-controller: should contain a phandle to the system + controller node (only for Armada 7k/8k) - #address-cells: should be 1. - #size-cells: should be 0. @@ -18,11 +29,11 @@ A sub-node is required for each comphy lane provided by the comphy. Required properties (child nodes): -- reg: comphy lane number. -- #phy-cells : from the generic phy bindings, must be 1. Defines the +- reg: COMPHY lane number. +- #phy-cells : from the generic PHY bindings, must be 1. Defines the input port to use for a given comphy lane. -Example: +Examples: cpm_comphy: phy@120000 { compatible = "marvell,comphy-cp110"; @@ -41,3 +52,33 @@ Example: #phy-cells = <1>; }; }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; |