1 files changed, 0 insertions, 62 deletions
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
deleted file mode 100644
index 778467307a93..000000000000
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* Rockchip AXI PCIe Endpoint Controller DT description
-
-Required properties:
-- compatible: Should contain "rockchip,rk3399-pcie-ep"
-- reg: Two register ranges as listed in the reg-names property
-- reg-names: Must include the following names
-	- "apb-base"
-	- "mem-base"
-- clocks: Must contain an entry for each entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-	- "aclk"
-	- "aclk-perf"
-	- "hclk"
-	- "pm"
-- resets: Must contain seven entries for each entry in reset-names.
-	   See ../reset/reset.txt for details.
-- reset-names: Must include the following names
-	- "core"
-	- "mgmt"
-	- "mgmt-sticky"
-	- "pipe"
-	- "pm"
-	- "aclk"
-	- "pclk"
-- pinctrl-names : The pin control state names
-- pinctrl-0: The "default" pinctrl state
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include 4 entries for all 4 lanes even if some of
-  them won't be used for your cases. Entries are of the form "pcie-phy-N":
-  where N ranges from 0 to 3.
-  (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
-  for changing the #phy-cells of phy node to support it)
-- rockchip,max-outbound-regions: Maximum number of outbound regions
-
-Optional Property:
-- num-lanes: number of lanes to use
-- max-functions: Maximum number of functions that can be configured (default 1).
-
-pcie0-ep: pcie@f8000000 {
-	compatible = "rockchip,rk3399-pcie-ep";
-	#address-cells = <3>;
-	#size-cells = <2>;
-	rockchip,max-outbound-regions = <16>;
-	clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
-		 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
-	clock-names = "aclk", "aclk-perf",
-		      "hclk", "pm";
-	max-functions = /bits/ 8 <8>;
-	num-lanes = <4>;
-	reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
-	reg-names = "apb-base", "mem-base";
-	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
-		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
-		      "pm", "pclk", "aclk";
-	phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
-	phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreq>;
-};